LS100-MIB
77 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.119 | Nodenec | |||
| 1.3.6.1.4.1.119.2 | Nodenec-mib | |||
| 1.3.6.1.4.1.119.2.3 | NodenecProductDepend | |||
| 1.3.6.1.4.1.119.2.3.14 | Nodeatomis-mib | |||
| 1.3.6.1.4.1.119.2.3.14.3 | Nodem5core-mib | |||
| 1.3.6.1.4.1.119.2.3.14.3.1 | Nodenode | |||
| 1.3.6.1.4.1.119.2.3.14.3.1.1 | ScalarnodeOperStatus | read-only | mandatory | Operational status of the LS100. |
| 1.3.6.1.4.1.119.2.3.14.3.1.2 | TablenodeIfConfTable | not-accessible | mandatory | The configuration of the line cards. |
| 1.3.6.1.4.1.119.2.3.14.3.1.2.1 | RownodeIfConfEntry | not-accessible | mandatory | The configuration of a line card. |
| 1.3.6.1.4.1.119.2.3.14.3.1.2.1.1 | ColumnnodeIfConfIndex | read-only | mandatory | The index of the table. Same as ifIndex. |
| 1.3.6.1.4.1.119.2.3.14.3.1.2.1.2 | ColumnnodeIfConfPhysType | read-only | mandatory | The PMD/physical layer format of the line card. |
| 1.3.6.1.4.1.119.2.3.14.3.1.2.1.3 | ColumnnodeIfConfRev | read-only | mandatory | The revision of the line cards. |
| 1.3.6.1.4.1.119.2.3.14.3.1.2.1.4 | ColumnnodeIfConfStatus | read-only | mandatory | Operational status of the line card. |
| 1.3.6.1.4.1.119.2.3.14.3.1.3 | ScalarnodeFanStatus | read-only | mandatory | Operational status of the Fan. |
| 1.3.6.1.4.1.119.2.3.14.3.1.4 | ScalarnodeUpcWindowSize | read-write | mandatory | UPC window size. Integer Wi represents Wi X 512 cell time. Wi=1 correspond to 1.4msec. Wi=120 correspond to 168msec. It is not allowed to change window size wh… |
| 1.3.6.1.4.1.119.2.3.14.3.1.5 | ScalarnodeBestEffortBufferSize | read-write | mandatory | Input buffer capacity for Best Effort traffic(Bb). The number of cells stored in the buffer is Bb X 128. The default value is 8. The sum of the buffer capacity… |
| 1.3.6.1.4.1.119.2.3.14.3.1.6 | ScalarnodeGuaranteedBufferSize | read-write | mandatory | Input buffer capacity for Guaranteed traffic(Bg). The number of cells stored in the buffer is Bg X 128. The default value is 0. The sum of the buffer capacity … |
| 1.3.6.1.4.1.119.2.3.14.3.1.7 | ScalarnodeBestEffortBufferThreshold | read-write | mandatory | Threshold buffer capacity for Best Effort traffic. If the number of cells stored in the buffer exceeds this threshold, cells with CLP=1 and traffic defined as … |
| 1.3.6.1.4.1.119.2.3.14.3.1.8 | ScalarnodeGuaranteedBufferThreshold | read-write | mandatory | Threshold buffer capacity for Guaranteed traffic. If the number of cells stored in the buffer exceeds this threshold, cells with CLP=1 and traffic defined as V… |
| 1.3.6.1.4.1.119.2.3.14.3.1.9 | ScalarnodeSaveConf | read-write | mandatory | Save system configuration information including the PVC table to the non-volatile memory. Writing a value of save(1) saves the configiration data. Writing the … |
| 1.3.6.1.4.1.119.2.3.14.3.1.10 | ScalarnodeSaveResult | read-only | mandatory | Indicates the result of the save command issued from NMS. The result is either success/temporary failure/notReady. |
| 1.3.6.1.4.1.119.2.3.14.3.1.11 | ScalarnodeReset | read-write | mandatory | Writing the value reset(1) resets the system. Writing the value noOperation(2) has no effect. When read, this object always has the value noOperation(2). |
| 1.3.6.1.4.1.119.2.3.14.3.2 | Nodelinf | |||
| 1.3.6.1.4.1.119.2.3.14.3.2.1 | TablelinfStatusTable | not-accessible | mandatory | Status of the line cards including ATM specific information. |
| 1.3.6.1.4.1.119.2.3.14.3.2.1.1 | RowlinfStatusEntry | not-accessible | mandatory | Status of a line card including ATM specific information. |
| 1.3.6.1.4.1.119.2.3.14.3.2.1.1.1 | ColumnlinfIndex | read-only | mandatory | Same as ifIndex |
| 1.3.6.1.4.1.119.2.3.14.3.2.1.1.2 | ColumnlinfStatus | read-only | mandatory | Status of line interface |
| 1.3.6.1.4.1.119.2.3.14.3.2.1.1.3 | ColumnlinfConf | read-write | mandatory | Line card type. |
| 1.3.6.1.4.1.119.2.3.14.3.2.1.1.4 | ColumnlinfFwdAvailableBandWidth | read-only | mandatory | The amount of bandwidth (Mbps) available/unallocated in the forward (incoming) direction. |
| 1.3.6.1.4.1.119.2.3.14.3.2.1.1.5 | ColumnlinfBkwdAvailableBandWidth | read-only | mandatory | The amount of bandwidth (Mbps) available/unallocated in the backward (outgoing) direction. |
| 1.3.6.1.4.1.119.2.3.14.3.3 | Nodeconn | |||
| 1.3.6.1.4.1.119.2.3.14.3.3.1 | ScalarconnPvcIndexNext | read-only | mandatory | The next available index for a row of the connPvcTable. |
| 1.3.6.1.4.1.119.2.3.14.3.3.2 | ScalarconnPvcIndexEnable | read-write | deprecated | When read, this object is the current minimum value of an index in the connPvcTable. Writing this value has no effect. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3 | TableconnPvcTable | not-accessible | mandatory | The table containing information on current PVC/SVCs. Currently, only PVCs are represented in this table. The table is also used to establish and delete PVCs. … |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1 | RowconnPvcEntry | not-accessible | mandatory | A row in the table is used to show the current PVC/SVCs. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.1 | ColumnconnPvcIndex | read-only | mandatory | A unique value to identify this point-to-point or point-to-multipoint connection. A point-to-multipoint connection has multiple rows in this table, one for eac… |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.2 | ColumnconnPvcTopology | read-write | mandatory | Topology of the connection. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.3 | ColumnconnPvcTrafficType | read-write | mandatory | Traffic Type. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.4 | ColumnconnPvcLowIfIndex | read-write | mandatory | The line interface number (ifIndex) of the low port. Normally, the low port has a lower ifIndex value than the high port. However, for point-to-multipoint conn… |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.5 | ColumnconnPvcLowVPI | read-write | mandatory | VPI value of the connection on the low port. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.6 | ColumnconnPvcLowVCI | read-write | mandatory | VCI value of the connection on the low port. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.7 | ColumnconnPvcLowUpcParam | read-write | mandatory | Number of cells allowed to be sent in the unit cell time (512 cell times). |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.8 | ColumnconnPvcLowUpc | read-write | mandatory | The action to take on a UPC violation for this connection on the low port. The tagging action is not supported by current hardware. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.9 | ColumnconnPvcLowThroughput | read-write | mandatory | Average rate of the connection (Mbps). Direction is from the low port to high port. This parameter is valid for the connection whose traffic type is CBR or VBR. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.10 | ColumnconnPvcHighIfIndex | read-only | mandatory | The line interface number (ifIndex) of the high port. Normally, the high port has a higher ifIndex value than the low port. However, for point-to-multipoint co… |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.11 | ColumnconnPvcHighVPI | read-write | mandatory | The VPI value of the connection on the high port. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.12 | ColumnconnPvcHighVCI | read-write | mandatory | The VCI value of the connection on the high port. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.13 | ColumnconnPvcHighUpcParam | read-write | mandatory | Number of cells allowed to be sent in the unit cell time (512 cell times). |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.14 | ColumnconnPvcHighUpc | read-write | mandatory | The action to take on a UPC violation for this connection on the high port. The tagging action is not supported by current hardware. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.15 | ColumnconnPvcHighThroughput | read-write | mandatory | Average rate of the connection (Mbps). Direction is from the high port to low port. This parameter is valid for the connection whose traffic type is CBR or VBR. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.16 | ColumnconnPvcLowInCells | read-only | mandatory | Number of incoming cells on this connection on low port. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.17 | ColumnconnPvcHighOutCells | read-only | mandatory | Number of outgoing cells on this connection on the high port. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.18 | ColumnconnPvcHighInCells | read-only | mandatory | Number of incoming cells on this connection on high port. (Valid for bi-direction connections only). |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.19 | ColumnconnPvcLowOutCells | read-only | mandatory | Number of outgoing cells on this connection on the low. port. (Valid for bi-direction connections only). |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.20 | ColumnconnPvcLowUpcViolatedCells | read-only | mandatory | Number of UPC violation cells incoming from the low port. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.21 | ColumnconnPvcHighUpcViolatedCells | read-only | mandatory | Number of UPC violation cells incoming from the high port. (Valid for bi-direction connections only). |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.22 | ColumnconnPvcRowStatus | read-write | mandatory | The status of this row. 'active' indicates that the connection is in use. 'notInService' indicates that the row exists but the connection is not established. '… |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.23 | ColumnconnPvcCause | read-only | mandatory | The result of the PVC establishment/deletion. |
| 1.3.6.1.4.1.119.2.3.14.3.3.3.1.24 | ColumnconnPvcKind | read-only | mandatory | This object identifies the connection is SVC or PVC. |
| 1.3.6.1.4.1.119.2.3.14.3.4 | Nodeperf | |||
| 1.3.6.1.4.1.119.2.3.14.3.4.1 | ScalarperfTrapEnable | read-write | mandatory | The status of performance monitoring traps. Its value does not affect other traps, such as coldStart. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2 | TableperfIfTable | not-accessible | mandatory | Table of performance monitoring information. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1 | RowperfIfEntry | not-accessible | mandatory | Performance monitoring information for a specific line. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.1 | ColumnperfIfIndex | read-only | mandatory | Line interface number. Same as ifIndex. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.2 | ColumnperfIfLcvs | read-only | mandatory | Line Code Violation. This object is valid only for DS3/E3. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.3 | ColumnperfIfParitySections | read-only | mandatory | Number of B1 (BIP) errors(OC-3c, UTP-5), Number of C-bit parity violation(DS3), Number of CRC-6 violation(DS1). |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.4 | ColumnperfIfParityLines | read-only | mandatory | Number of B2 (BIP) errors(OC-3c, UTP-5), Number of P-bit parity violation(DS3). |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.5 | ColumnperfIfParityPaths | read-only | mandatory | Number of B3 (BIP) errors(OC-3c, UTP-5), Number of PLCP BIP violation(DS3). |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.6 | ColumnperfIfHecErrors | read-only | mandatory | Number of HEC errors detected. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.7 | ColumnperfIfMisDelivdCells | read-only | mandatory | Number of misdelivered cells. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.8 | ColumnperfIfOverFlowCells | read-only | mandatory | Number of cells discarded due to buffer overflow. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.9 | ColumnperfIfInCBRCells | read-only | mandatory | Number of received CBR cells. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.10 | ColumnperfIfOutCBRCells | read-only | mandatory | Number of transmitted CBR cells. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.11 | ColumnperfIfInVBRCells | read-only | mandatory | Number of received VBR cells. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.12 | ColumnperfIfOutVBRCells | read-only | mandatory | Number of transmitted VBR cells. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.15 | ColumnperfIfInUBRCells | read-only | mandatory | Number of received UBR cells. |
| 1.3.6.1.4.1.119.2.3.14.3.4.2.1.16 | ColumnperfIfOutUBRCells | read-only | mandatory | Number of transmitted UBR cells. |