LSI-MegaRAID-SAS-MIB
620 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge private |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3582 | Nodelsi | |||
| 1.3.6.1.4.1.3582.4 | NodestorageComponents | |||
| 1.3.6.1.4.1.3582.4.1 | NodelsiRAIDServer | |||
| 1.3.6.1.4.1.3582.4.1.1 | ScalarhostName | read-only | mandatory | Name of the host system. |
| 1.3.6.1.4.1.3582.4.1.2 | ScalarhostOSInfo | read-only | mandatory | Operating System description where SNMP agent is running. |
| 1.3.6.1.4.1.3582.4.1.3 | NodeversionInfo | |||
| 1.3.6.1.4.1.3582.4.1.3.1 | ScalarmibVersion | read-only | mandatory | The MIB version no. (xx.yy) |
| 1.3.6.1.4.1.3582.4.1.3.2 | ScalaragentModuleName | read-only | mandatory | The agent module name |
| 1.3.6.1.4.1.3582.4.1.3.3 | ScalaragentModuleVersion | read-only | mandatory | The module version in xx.yy format. Where xx is the major version number and yy is the minor version number(without build information). |
| 1.3.6.1.4.1.3582.4.1.3.4 | ScalarreleaseDate | read-only | mandatory | Module Release Date |
| 1.3.6.1.4.1.3582.4.1.4 | NodemegaRAID-SAS | |||
| 1.3.6.1.4.1.3582.4.1.4.1 | Nodeadapter | |||
| 1.3.6.1.4.1.3582.4.1.4.1.1 | ScalaradpNumber | read-only | mandatory | The total no of SAS adapters present. |
| 1.3.6.1.4.1.3582.4.1.4.1.2 | TableadapterPropertiesTable | not-accessible | optional | A List of adapter Entries containing Information/Properties about the adapters. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1 | RowadapterPropertiesEntry | not-accessible | mandatory | An Entry in the adapter table. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.1 | ColumnadapterID-APT | read-only | optional | AdapterID for this Adapter.(Unique) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.2 | ColumnrebuildRate | read-write | optional | Rebuild rate on this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.3 | ColumnreconstructionRate | read-write | optional | Reconstruction rate on this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.4 | ColumnalarmState | read-write | optional | Alarm is enabled or disabled on this adapter. Values: disabled(0),enabled(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.5 | ColumncacheFlushInterval | read-only | optional | Cache flush interval in seconds for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.6 | ColumnclusterState | read-only | optional | Cluster is enabled or disabled on this adapter. Values: disabled(0),enabled(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.7 | ColumnpredFailPollInterval | read-write | optional | Number of seconds between precdictive fail polls on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.8 | ColumnintThrottleCount | read-write | optional | Interrupt throttle active count on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.9 | ColumnintThrottleTimeUs | read-write | optional | Interrupt throttle completion hold time on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.10 | ColumnpatrolReadRate | read-write | optional | Patrol Read Rate for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.11 | ColumnbgiRate | read-write | optional | Background initialization rate for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.12 | ColumnspinupDelay | read-write | optional | Number of seconds to delay among spinup groups for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.13 | ColumnspinupDriveCount | read-write | optional | Maximum number of drives to spin up at one time for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.14 | ColumncoercionMode | read-only | optional | Drive capacity coercion mode. 0->None; 1->128MB; 2->1GB |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.15 | ColumnnvramSize | read-only | optional | NVRAM size in KB for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.16 | ColumnmemorySize | read-only | optional | Memory size in MB for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.17 | ColumnflashSize | read-only | optional | Flash size in MB for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.18 | ColumnvdPresentCount | read-only | optional | Virtual devices present in this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.19 | ColumnvdDegradedCount | read-only | optional | Number of virtual devices in this adapter that are critical |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.20 | ColumnvdOfflineCount | read-only | optional | Number of virtual devices in this adapter that are offline |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.21 | ColumnpdPresentCount | read-only | optional | Physical devices present in this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.22 | ColumnpdDiskPresentCount | read-only | optional | Physical disk devices present in this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.23 | ColumnpdDiskPredFailureCount | read-only | optional | Number of disk devices in this adapter that are critical |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.24 | ColumnpdDiskFailedCount | read-only | optional | Number of disk devices in this adapter that are failed |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.25 | ColumnccRate | read-write | optional | Consistency Check rate on this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.26 | ColumncompatibilityFlag | read-only | optional | To inform compatibilities between Applications and FW. 0->incompatible; 1->compatible |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.27 | ColumncompatibilityInfo | read-only | optional | Compatibility Information. Format->(Firmware Forward compatibility flag:Firmware Backward compatibility flag:Firmware version flag:Application Forward compatib… |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.28 | ColumnabortCConError | read-write | optional | Abort CC on detecting error is enabled or disabled on this adapter. Values: No(0),Yes(1),NA(2) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.29 | ColumncopyBackState | read-only | optional | CopyBack is enabled or disabled on this adapter.Values: disabled(0),enabled(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.30 | ColumnrevisionIdentifier | read-only | optional | Board revision ID for this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.31 | ColumnmultipathSupport | read-only | optional | Multipath is supported or not supported on this adapter.Values: not supported(0),supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.32 | ColumnssdSMARTerEnabled | read-only | optional | Copyback to SSD on SMART error. Values Enabled(0),Disabled(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.33 | ColumnenableSpinDownUnconfigured | read-only | optional | Spin Down Unconfigured Drives(1), Do Not Spin Down Unconfigured Drives(0) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.34 | ColumndisableSpinDownHotSpare | read-only | optional | Spin Down Hotspares(0), Do Not Spin Down Hotspares(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.35 | ColumnspinDownTime | read-only | optional | SpinDownTime in minutes |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.36 | ColumnspinupEnclDriveCount | read-only | optional | Maximum number of drives that can be spin up in an enclosure |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.37 | ColumnspinupEnclDelay | read-only | optional | Delay between drive spin up for drives within an enclosure |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.38 | ColumndefaultLdPSPolicy | read-only | optional | power saving policy.values:controller default power saving policy=0, AUTO=1, MAX=2, Max with no cache=6, NONE=255 |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.39 | ColumndisableLdPSInterval | read-only | optional | LD power savings are disabled for yy hours beginning at disableLdPSTime. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.40 | ColumndisableLdPSTime | read-only | optional | LD power savings shall be disabled at xx minutes from 12:00am. |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.41 | ColumnsupportBreakMirror | read-only | optional | 1=Support break mirror operation,0=Do not Support break mirror operation |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.42 | ColumntemperatureROC | read-only | optional | temperature of RAID On Chip in Celsius |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.43 | ColumntemperatureCtrl | read-only | optional | temperature of controller in Celsius |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.44 | ColumnpreventPIImport | read-only | optional | 1=Prevent import of SAS PI protected logical disks , 0=Not Prevent import of SAS PI protected logical disks |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.45 | ColumnenablePI | read-only | optional | 1 = Enable SAS PI for controller , 0 = Disable SAS PI for controller |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.46 | ColumntotalSpaceformetadata | read-only | optional | Total Space used for MetaData |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.47 | ColumnuseEmergencySpare | read-only | optional | This field give the information about Emergency Spare possible Drive types(Uncongiured Good/Global Hotspare) |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.48 | ColumnuseEmergencySparesforSMARTer | read-only | optional | 1 = Use Emergency spares for SMARTer ,0 = Not Use Emergency spares for SMARTer |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.49 | ColumnsupportShieldState | read-only | optional | 1 =Support PD shield state ,0 = Not Support PD shield state |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.50 | ColumnwriteCacheCapable | read-only | optional | 1 = SSC support write caching IOs ,0 = SSC not support write caching IOs |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.51 | ColumntotalCacheSize | read-only | optional | This field give the information about total Size of currently configured SSC,in GB |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.52 | ColumnmaximumCacheSize | read-only | optional | This field give the information about maxmium Size of SSC that can yet be configured,in GB |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.53 | ColumnctrlSasAddr | read-only | optional | This field gives the controller SAS address |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.54 | ColumndomainId | read-only | optional | This field gives the Domain ID |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.55 | ColumnpeerControllerStatus | read-only | optional | This field gives the Peer controller Status |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.56 | ColumnmaximumControllerNodes | read-only | optional | This field gives the HA nodes this FW supports |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.57 | ColumnincompatibilityDetails | read-only | optional | This field gives the Incompatibility Details |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.58 | ColumntopologyType | read-only | optional | This field gives the Topology Type |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.59 | ColumnsupportOnlineFWUpdate | read-only | optional | 1 = Online firmware update is supported, 0 = Online firmware update is not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.60 | ColumnsupportFastPathWB | read-only | optional | 1 = Support Fast Path WB on Raptor Type Ld ,0 = Does not support Fast Path WB on Raptor Type Ld |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.61 | ColumnsupportConfigAutoBalance | read-only | optional | 0 = no configuration auto balance support, 1 = configuration auto balance support is present |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.62 | ColumnmaintenanceMode | read-only | optional | 1=FW supports maintenance mode |
| 1.3.6.1.4.1.3582.4.1.4.1.2.1.63 | ColumndisableLargeIO | read-only | optional | 0 = Large IO is supported, 1 = Large IO is unsupported |
| 1.3.6.1.4.1.3582.4.1.4.1.3 | TableadapterInfoTable | not-accessible | optional | A List of adapter Entries containing Information/Properties about the adapters on the Controller. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1 | RowadapterInfoEntry | not-accessible | mandatory | An Entry in the adapterInfo table. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.1 | ColumnadapterID-AIT | read-only | optional | AdapterID for this Adapter.(Unique) |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.2 | ColumnadapterVendorID | read-only | optional | PCI Vendor ID for this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.3 | ColumndevID | read-only | optional | PCI Device ID for this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.4 | ColumnsubVendorID | read-only | optional | PCI Sub-Vendor ID for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.5 | ColumnsubDevID | read-only | optional | PCI Sub-Device ID for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.6 | ColumnhostInterface | read-only | optional | Host interface information for this adapter. Values: N/A(0),PCIX(1),PCIE(2),iSCSI(3),SAS-3G(4) |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.7 | ColumnhostInterfacePortCnt | read-only | optional | Port Count on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.8 | ColumnhostInterfacePortAddr | read-only | optional | Port address comma delimited |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.9 | ColumndevInterface | read-only | optional | Multiple device interface support values separated by space. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.10 | ColumndevInterfacePortCnt | read-only | optional | Device Port Count on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.11 | ColumndevInterfacePortAddr | read-only | optional | Device Port address comma delimited |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.12 | ColumnproductName | read-only | optional | Product name e.g. MegaRAID SAS-8E, MegaRAID SAS-4X, etc. |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.13 | ColumnserialNo | read-only | optional | Controller serial number |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.14 | ColumnfirmwareVersion | read-only | optional | Firmware version Format->(Firmware Package Version:Version:Date:Time) |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.15 | ColumndriverVersion | read-only | optional | Driver version Format->(Driver Name:Version) |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.16 | ColumnexpanderFirmwareVersion | read-only | optional | Expander firmware version - Not Available if expander is not present on the controller |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.17 | ColumnlockKeyBinding | read-only | optional | Type of lock key binding. lock key is not bound(0),lock key bound to FW secret key(1), lock key bound to user(2), lock key bound to a TPM(3) |
| 1.3.6.1.4.1.3582.4.1.4.1.3.1.18 | ColumnmaxDAPdCountSpinup60 | read-only | optional | Maximum number of drives to spinup within 60 sec for direct attached drives |
| 1.3.6.1.4.1.3582.4.1.4.1.4 | TableadapterSupportInfoTable | not-accessible | optional | A List of adapter Entries containing Information/Properties about the adapters on the Controller. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1 | RowadapterSupportInfoEntry | not-accessible | mandatory | An Entry in the adapter table. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.1 | ColumnadapterID-ASIT | read-only | optional | AdapterID for this Adapter.(Unique) |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.2 | ColumnmaxArms | read-only | optional | Maximum arms per Virtual Drive supported for this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.3 | ColumnmaxSpans | read-only | optional | Maximum spans per Virtual Drive supported for this Adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.4 | ColumnmaxArrays | read-only | optional | Maximum no of arrays supported for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.5 | ColumnmaxVDs | read-only | optional | Maximum number of Virtual Drive s supported for this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.6 | ColumnhardwarePresent | read-only | optional | Supported Hardware on this adapter. bbu(1),alarm(2),nvram(3),uart(4),TPM(5),expander(6). For multiple hw support a space delimited list will appear. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.7 | ColumnmaxConcurrentCmds | read-only | optional | The maximum parallel commands supported on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.8 | ColumnmaxSGECount | read-only | optional | The maximum Scatter Gather Element count allowed on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.9 | ColumnmaxRequestSize | read-only | optional | The maximum data transfer size in sectors, on this adapter. |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.10 | ColumnmaxLdsPerArray | read-only | optional | Max Ld's per array in adapter |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.11 | ColumnpartitionsInDDF | read-only | optional | Max LD's per Array in configuration |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.12 | ColumnallowSSDMixInLD | read-only | mandatory | allow SAS/SATA SSD mix within an LD. allow(1), not allow(0) |
| 1.3.6.1.4.1.3582.4.1.4.1.4.1.13 | ColumnallowMixSSDHDDInLD | read-only | mandatory | allow SSD/HDD mix within an LD.allow(1), not allow(0) |
| 1.3.6.1.4.1.3582.4.1.4.1.5 | TableadapterOperationsSupportInfoTable | not-accessible | optional | A List of adapter Entries containing Information/Properties about the adapters on the Controller. |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1 | RowadapterOperationsSupportInfoEntry | not-accessible | mandatory | An Entry in the adapter table. |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.1 | ColumnadapterID | read-only | optional | AdapterID for this Adapter.(Unique) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.2 | ColumnrbldRateSupported | read-only | optional | Rebuilding rate change support for this Adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.3 | ColumnccRateSupported | read-only | optional | Consistency Check rate change support for this Adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.4 | ColumnbgiRateSupported | read-only | optional | Background initialization rate change support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.5 | ColumnreconRateSupported | read-only | optional | Reconstruction rate change support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.6 | ColumnpatrolRateSupported | read-only | optional | Patrol read rate change support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.7 | ColumnalarmControlSupported | read-only | optional | Alarm control support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.8 | ColumnclusterSupported | read-only | optional | Cluster support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.9 | ColumnbbuSupported | read-only | optional | BBU support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.10 | ColumnspanningAllowedSupported | read-only | optional | Spanning support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.11 | ColumndedicatedHotSparesSupported | read-only | optional | Dedicated HotSpares support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.12 | ColumnrevertibleHotSparesSupported | read-only | optional | Revertible HotSpares support for this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.13 | ColumnforeignConfigImportSupported | read-only | optional | Support foreign config import on this adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.14 | ColumnselfDiagnosticSupported | read-only | optional | Controller supports self diagnostic. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.15 | ColumnallowMixedRedundancyOnArraySupported | read-only | optional | Allow different Virtual Disk on the same array to have different redundancy levels. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.16 | ColumnabortCConErrorSupported | read-only | optional | Abort CC on detecting error is supported on this adapter. Values: No(0),Yes(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.17 | ColumnsecuritySupported | read-only | optional | Displays the security support. if supported (1) , not supported (0) |
| 1.3.6.1.4.1.3582.4.1.4.1.5.1.18 | ColumnsupportPIcontroller | read-only | optional | Displays the support PI. 1=LD SAS PI Type 0, 0=LD Not SAS PI Type 0 |
| 1.3.6.1.4.1.3582.4.1.4.1.6 | NodebbuInfo | |||
| 1.3.6.1.4.1.3582.4.1.4.1.6.1 | ScalarbbuNumber | read-only | mandatory | The present number of rows in the BBU Table. |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2 | TablebbuTable | not-accessible | optional | A List of BBU Entries containing Information/Properties about the BBU. |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1 | RowbbuEntry | not-accessible | mandatory | An Entry in the BBU table. |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.1 | ColumnbbuID | read-only | optional | BBUID for this BBU.(Unique) |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.2 | ColumnbatteryType | read-only | optional | BBU Type. |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.3 | ColumnnextLearnTime | read-only | optional | Time of next scheduled learn cycle (seconds past 1/1/2000) |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.4 | ColumnabsStateOfCharge | read-only | optional | Predicted remaining capacity expressed as % of DesignCapacity() (0-100). Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.5 | ColumnfullChargeCapacity | read-only | optional | Predicted pack capacity when it is fully charged in joules |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.6 | ColumnaverageEmptyTime | read-only | optional | One-minute rolling average of the predicted remaining battery life. Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.7 | ColumncycleCount | read-only | optional | Number of charge cycles the battery has experienced. Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.8 | ColumnfirmwareStatus | read-only | optional | Condition of battery in following order: packMissing(0/1) voltageLow(0/1) temperatureHigh(0/1) chargeActive(0/1) dischargeActive(0/1) learnCycleRequested(0/1) … |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.9 | Columnvoltage | read-only | optional | Accurate battery terminal voltage in mV, resolution of 1mV |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.10 | ColumnautoLearnPeriod | read-only | optional | Time (in seconds) between learn cycles (0 to disable auto learn) |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.11 | ColumnrelStateOfCharge | read-only | optional | Predicted remaining capacity expressed as % of FullChargeCapacity() (0-100). Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.12 | ColumncapacityRemain | read-only | optional | Predicted charge or energy remaining in the battery in joules |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.13 | ColumnrunTimeToEmpty | read-only | optional | Relative gain or loss in remaining life in response to change in power policy represent in minute. Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.14 | ColumnavgTimeToFull | read-only | optional | One-minute rolling average of predicted remaining time to full charge. Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.15 | ColumnerrorMargin | read-only | optional | Expected margin of error (%) in charge calculation (2-100). Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.16 | Columntemperature | read-only | optional | Battery temperature in degree Centigrade |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.17 | ColumnmfgName | read-only | optional | Battery manufacturer's name |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.18 | ColumndeviceName | read-only | optional | Battery name |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.19 | ColumnserialNumber | read-only | optional | Battery serialNumber |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.20 | ColumnchargerStatus | read-only | optional | Battery charger status. Values: N/A(-1), off(0), complete(1), progress(2) |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.21 | ColumnadpID | read-only | optional | The adapter id where BBU is attached |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.22 | ColumnremainingCapAlarm | read-only | optional | Remaining capacity to alarm. Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.23 | ColumnremainingTimeAlarm | read-only | optional | Remaining time to alarm. Value of -1 means not supported |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.24 | Columnbbu-current | read-only | optional | Current(In mA) being supplied (or accepted) through the battery terminals |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.25 | ColumngasGaugeStatus | read-only | optional | Gas gauge status |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.26 | ColumnbbuFRU | read-only | optional | bbu FRU |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.27 | ColumnbatteryReplacement | read-only | optional | This property denotes whether the Battery needs to be replaced or not.1 =battery needs to be replaced ,0 =battery needs not to be replaced |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.28 | ColumnbbuRetentiontime | read-only | optional | The total no. of hours the battery can support the current capacity reserve. Undefined(0),48 hours+(>48),the exact no of hours(<=48) |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.29 | ColumnbbuState | read-only | optional | This property gives the Information about BBU state. Operational = if BBU is working fine, Non-Operational = if BBU is not working fine |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.30 | ColumnmemoryModuleFRU | read-only | optional | tmm FRU |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.31 | ColumnbbumoduleVersion | read-only | optional | Battery Firmware Version |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.32 | ColumnautoLearnMode | read-only | optional | Automatic Learn Mode |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.33 | ColumnchargingStatus | read-only | optional | Charging Status |
| 1.3.6.1.4.1.3582.4.1.4.1.6.2.1.34 | Columncapacitance | read-only | optional | Capacitance |
| 1.3.6.1.4.1.3582.4.1.4.1.7 | TablecommonDeviceInfoTable | not-accessible | optional | A List of general Physical Disk info |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1 | RowcommonDeviceInfoEntry | not-accessible | mandatory | An Entry in the CommonDeviceInfo table. |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.1 | ColumnadapterID-CDIT | read-only | mandatory | Unique adapter ID |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.2 | ColumnforceOnline | read-only | mandatory | Physical drive force Online operation support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.3 | ColumnforceOffline | read-only | mandatory | Physical drive force Offline operation support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.4 | ColumnforceRebuild | read-only | mandatory | Physical drive force Rebuild operation support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.5 | ColumnsupportsSAS | read-only | mandatory | SAS physical drive support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.6 | ColumnsupportsSATA | read-only | mandatory | SATA physical drive support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.7 | ColumnallowMixInEnclosure | read-only | mandatory | Mix InEnclosure support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.8 | ColumnallowMixInVD | read-only | mandatory | MixInVIRTUALDRIVE support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.9 | ColumnallowSataInCluster | read-only | mandatory | SataInCluster support. Values: notSupported(0), supported(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.7.1.10 | ColumnsetPowerStateForCfg | read-only | mandatory | FW requires application to set power state before configuration changes. Required(1), Not Required(0) |
| 1.3.6.1.4.1.3582.4.1.4.1.8 | TablecommonVirtualDeviceInfoTable | not-accessible | optional | A List of general Virtual Drive info |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1 | RowcommonVirtualDeviceInfoEntry | not-accessible | mandatory | An Entry in the CommonVirtualDeviceInfo table. |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.1 | ColumnadapterID-CVDIT | read-only | mandatory | Unique adapter ID |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.2 | ColumnsupportedReadPolicy | read-only | mandatory | Read policy support. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.3 | ColumnsupportedWritePolicy | read-only | mandatory | Write policy support. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.4 | ColumnsupportedIOPolicy | read-only | mandatory | IO policy support. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.5 | ColumnsupportedAccessPolicy | read-only | mandatory | Access policy support. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.6 | ColumnsupportedMinSize | read-only | mandatory | Minimum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.7 | ColumnsupportedMaxSize | read-only | mandatory | Maximum stripe size supported. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc |
| 1.3.6.1.4.1.3582.4.1.4.1.8.1.8 | Columnldbbm | read-only | mandatory | 1=LD bad block management is enabled, 0=LD bad block management is not enabled |
| 1.3.6.1.4.1.3582.4.1.4.1.9 | TableadapterStatusSupportInfoTable | not-accessible | optional | A List of adapter Entries containing Information/Properties about the adapters on the Controller. |
| 1.3.6.1.4.1.3582.4.1.4.1.9.1 | RowadapterStatusSupportInfoEntry | not-accessible | mandatory | An Entry in the adapter table. |
| 1.3.6.1.4.1.3582.4.1.4.1.9.1.1 | ColumnadapterID-ASSIT | read-only | optional | AdapterID for this Adapter.(Unique) |
| 1.3.6.1.4.1.3582.4.1.4.1.9.1.2 | ColumnlockKeyAssigned | read-only | optional | Lock key Assigned support for this Adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.9.1.3 | ColumnlockKeyFailed | read-only | optional | lock Key Failed support for this Adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.9.1.4 | ColumnlockKeyNotBackedup | read-only | optional | lock Key Not Backedup support for this Adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.9.1.5 | ColumnbiosNotDetected | read-only | optional | bios Not Detected support for this Adapter. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.1.9.1.6 | ColumncacheIsPinned | read-only | optional | 1=controller cache is pinned for missing or offline LDs |
| 1.3.6.1.4.1.3582.4.1.4.1.10 | TableadapterLdOperationSupportInfoTable | not-accessible | optional | A List of adapter Entries containing Information/Properties about the adapters on the Controller. |
| 1.3.6.1.4.1.3582.4.1.4.1.10.1 | RowadapterLdOperationSupportInfoEntry | not-accessible | mandatory | An Entry in the adapter table. |
| 1.3.6.1.4.1.3582.4.1.4.1.10.1.1 | ColumnadapterID-ALSIT | read-only | optional | AdapterID for this Adapter.(Unique) |
| 1.3.6.1.4.1.3582.4.1.4.1.10.1.2 | ColumnallowCtrlEncryption | read-only | optional | if it is set (1) supports controller encryption |
| 1.3.6.1.4.1.3582.4.1.4.2 | Nodedevice | |||
| 1.3.6.1.4.1.3582.4.1.4.2.1 | NodephysicalDriveInfo | |||
| 1.3.6.1.4.1.3582.4.1.4.2.1.1 | ScalarpdNumber | read-only | mandatory | The present number of rows in the physical drive table. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2 | TablephysicalDriveTable | not-accessible | optional | A List of physical drive Entries containing Information/Properties about the drives |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1 | RowphysicalDriveEntry | not-accessible | optional | An Entry in the Device Table. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.1 | ColumnpdIndex | read-only | optional | The unique ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.2 | ColumnphysDevID | read-only | optional | The Device ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.3 | ColumnoemSupported | read-only | optional | Is the drive supported by the OEM (OEM-specific checks). Values: notSupported(1), supported(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.4 | ColumnscsiDevType | read-only | optional | Type of this Device. Values: disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unknown(31) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.5 | ColumnconnectedAdapterPort | read-only | optional | Adapter port(s) to which the device is connected. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.6 | ColumndeviceSpeed | read-only | optional | Maximum supported speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.7 | ColumnmediaErrCount | read-only | optional | Error count of the device |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.8 | ColumnotherErrCount | read-only | optional | Other error count of the device |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.9 | ColumnpredFailCount | read-only | optional | Predictive fail count of the device |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.10 | ColumnpdState | read-only | optional | Firmware's interpretation of drive state. Values: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.11 | ColumndisabledForRemoval | read-only | optional | If true, drive is ready for removal. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.12 | ColumnlinkSpeed | read-only | optional | Negotiated link speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.13 | ColumnpdSupportFlags | read-only | optional | 1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byte:intf(0-Unknown, 1-parallel SCS… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.14 | ColumnsasAddr | read-only | optional | Device SAS addresses. Comma separeted for multiple address |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.15 | ColumnrawSize | read-only | optional | Size(MB) before COD and coercion |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.16 | ColumnnonCoercedSize | read-only | optional | Size(MB) after COD is reserved but before coercion |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.17 | ColumncoercedSize | read-only | optional | Size(MB) after COD is reserved and after coercion |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.18 | ColumnenclDeviceId | read-only | optional | Enclosure's device Id (in decimal); if device is not within enclosure value is -1 |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.19 | ColumnenclIndex | read-only | optional | Firmware internal enclosure index |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.20 | ColumnslotNumber | read-only | optional | Slot number of this drive, if the Physical Disk is part of an enclosure then -1 |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.21 | ColumnoperationProgress | read-only | optional | Operation progress in %. e.g. Rebuild progress is 10% |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.22 | ColumnadpID-PDT | read-only | optional | Controller id where this Physical Drive is attached |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.23 | ColumnoperationSupport | read-only | optional | MakeOnline,MakeOffline,MakeFailed,MakeBad,MakeUncofigured, MakeSpare,RemoveSpare,replaceMissing,markMissing,startRebuild, stopRebuild,locate,pdclear,foreignImp… |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.24 | ColumnpdVendorID | read-only | optional | Vendor ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.25 | ColumnpdProductID | read-only | optional | Product ID |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.26 | ColumnpdFwversion | read-only | optional | PD firmware version |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.27 | ColumndiskType | read-only | optional | Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.28 | ColumnpartnerDevId | read-only | optional | If drive is in an enclosure with dual paths,This is Partner Device ID. In all other cases INVALID(-1) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.29 | Columnmediatype | read-only | optional | Media Type HDD(0),SSD(1),Solid state flash module(2) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.30 | ColumnpowerState | read-only | optional | Power condition of the device. Values are device is active(0),device is stopped(1),device is transitioning between power states(255) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.31 | Columnsecured | read-only | optional | 1=drive is secured, 0=not secured |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.32 | Columnlocked | read-only | optional | 1=drive is locked, 0=unlocked |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.33 | Columnforeign | read-only | optional | 1=drive is secured by a foreign lock key, 0=drive is not secured by a foreign lock key |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.34 | ColumnoemCertified | read-only | optional | Is the drive certified by the OEM (OEM-specific checks). Values: notCertified(1), Certified(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.35 | ColumnforeignImportNotAllowed | read-only | optional | 1=Drive is not allowed foreignImport operation, 0=Drive is allowed foreignImport operation |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.36 | ColumnpdTemperature | read-only | optional | Physical Drive temperature in Celsius |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.37 | ColumnpdSerialNumber | read-only | optional | Physical Drives serial number |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.38 | ColumnpiEligible | read-only | optional | Protection Information eligibility.1=drive can be used for PD Enabled LD , 0=drive can't be used for PD Enabled LD |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.39 | ColumnpiType | read-only | optional | SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved SAS PI Type 4(4) ,Reserved SAS … |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.40 | ColumnpiFormatted | read-only | optional | formatted for PI information. 1=drive is formatted for PI information, 0=no PI data. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.41 | ColumnuserDataBlockSize | read-only | optional | Number of bytes of user data in LBA |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.42 | ColumncommissionedSpare | read-only | optional | Yes = this PD is a commissioned spare, No = this PD is not a commissioned spare. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.43 | ColumnemergencySpare | read-only | optional | Eligible = this PD is a emergency spare, Ineligible = this PD is not a emergency spare. |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.44 | ColumnshieldCounter | read-only | optional | How many times the shield diagnostics was run before it was marked failed |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.45 | ColumnshieldDiagCompletionTime | read-only | optional | Last successful Diagnostics completion time. 0 is N/A |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.46 | ColumnineligibleForSSCD | read-only | optional | Whether PD cannot be used for an SSCD. PD can not be used for an SSCD(1), PD can be used for an SSCD(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.47 | ColumnineligibleForLd | read-only | optional | Whether PD cannot be used for a regular LD. PD can not be used for a regular LD(1), PD can be used for a regular LD(0) |
| 1.3.6.1.4.1.3582.4.1.4.2.1.2.1.48 | Columnserviceable | read-only | optional | Whether PD is removeable for service. PD is removeable for service(1), PD is not removeable for service(0) |
| 1.3.6.1.4.1.3582.4.1.4.3 | NodevirtualDevice | |||
| 1.3.6.1.4.1.3582.4.1.4.3.1 | NodevdInfo | |||
| 1.3.6.1.4.1.3582.4.1.4.3.1.1 | ScalarvdNumbers | read-only | mandatory | The present number of rows in the virtualDrive table. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2 | TablevirtualDriveTable | not-accessible | optional | A List of Virtual Drives Entries containing Information/Properties about the virtualDrive. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1 | RowvirtualDriveEntry | not-accessible | optional | An Entry in the virtualDrive Table. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.1 | ColumnvirtualDevID | read-only | optional | The unique Virtual Drives ID |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.2 | Columnsize | read-only | optional | Total size in MB of the drive |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.3 | ColumnclusterOwnerDeviceId | read-only | optional | VD owner's device Id |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.4 | ColumntargetId | read-only | optional | Virtual Drive target id (i.e. 0 to 63) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.5 | Columnstate | read-only | optional | The Device state: Values: offline(0),partially-degraded(1),degraded(2),optimal(3) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.6 | Columnname | read-only | optional | Virtual Drive name |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.7 | ColumndefaultCachePolicy | read-only | optional | Default cache policy settings. Values: WriteBack, WriteThrough, ReadAdaptive, ReadAhead, ReadAheadNone, Cached, Direct, Write Cache OK if Bad BBU, No Write Cac… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.8 | ColumnaccessPolicy | read-only | optional | Access policy settings. Values: access-rw(0), access-read-only(2), access-blocked(3) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.9 | ColumndiskCachePolicy | read-only | optional | Physical disk cache policy. Values: unchanged(0),enable(1),disable(2) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.10 | ColumnbgiState | read-only | optional | Disable/Enable Back Groung Initialization on this Virtual Drive. Values: disable(1),enable(0) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.11 | Columnprl | read-only | optional | Primay raid level. Values: 0(RAID-0), 1(RAID-1), 3(RAID-3), 4(RAID-4), 5(RAID-5), 6(RAID-6),15(Single Disk or JBOD), 17(RAID-1E), 21(RAID-5E), 31(Concatenation… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.12 | ColumnrLQ | read-only | optional | Raid level qualifier |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.13 | ColumnsRL | read-only | optional | Secondary raid level. Values: 0(Stripped), 1(Mirrored), 2(Concatenated), 3(Spanned) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.14 | ColumnstripeSize | read-only | optional | Stripe Size. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.15 | ColumnnumDrives | read-only | optional | Number of drivers per span |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.16 | ColumnspanDepth | read-only | optional | Number of spans. If only one array then it is considered as 1 span |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.17 | ColumninitState | read-only | optional | 0=no init, 1=quick init, 2=full init |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.18 | ColumnvdOperationProgress | read-only | optional | Progress % for an operation / No operation in progress |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.19 | ColumncurrentCachePolicy | read-only | optional | Cache policy settings. Values:WriteBack, WriteThrough, ReadAdaptive, ReadAhead, ReadAheadNone, Cached, Direct, Write Cache OK if Bad BBU, No Write Cache if Bad… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.20 | ColumnadapterID-VDT | read-only | optional | Adapter ID |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.21 | ColumnencryptionType | read-only | optional | logical drive encryption type. Values No Encryption(0), FDE drive encryption(1), Controller-based encryption(2) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.22 | ColumnvdOperationSupport | read-only | optional | startFGI,stopFGI,startCC,stopCC,startRecon,deleteLD |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.23 | ColumnbadBlocksExist | read-only | optional | 0 = LD bad block table is empty, 1 = LD bad block table is not empty |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.24 | ColumndefaultPSPolicy | read-only | optional | Power Savings policy set for this LD.Values:controller default power saving policy=0, AUTO=1, MAX=2, MAX with no cache=6, NONE=255 |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.25 | ColumncurrentPSPolicy | read-only | optional | Power Savings policy set for this LD.Values:controller default power saving policy=0, AUTO=1, MAX=2, MAX with no cache=6, NONE=255 |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.26 | ColumnbreakMirror | read-only | optional | Break Mirror Policy set for this LD.Values:1=break mirror is allowed, 0=break mirror not is allowed |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.27 | ColumnjoinMirror | read-only | optional | Join Mirror policy set for this LD.Values:1=join mirror is allowed, 0=join mirror not is allowed |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.28 | ColumnmirrorPdInfo | read-only | optional | Mirror Info Property give the Information about mirror of PD and PD state respectively. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.29 | ColumnvdPiType | read-only | optional | Information about logical drive protection type . No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved SAS PI Type 4(… |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.30 | ColumnmirrorDataSize | read-only | optional | Total Space used for mirrorData or Parity information |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.31 | ColumncacheCadeType | read-only | optional | 0= Non-CacheCade VD, 1= CacheCade Type is Read & Write, 2= CacheCade Type is Read only, 3= R1-EC |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.32 | ColumncurrentWritePolicy | read-only | optional | Current write policy settings. Values: WriteBack, WriteThrough, AlwaysWriteBack |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.33 | ColumndefaultWritePolicy | read-only | optional | Default write policy settings. Values: WriteBack, WriteThrough, AlwaysWriteBack |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.34 | ColumnassociatedVD | read-only | optional | This property gives the Information about VD is Cached or VD is not cached. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.35 | ColumnhostAccessPolicy | read-only | optional | This property gives the Host Access Policy |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.36 | Columnguid | read-only | optional | This property gives the LD GUID. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.37 | ColumnfastPathWBEnabled | read-only | optional | 0= FastPathWB disabled, not a Raptor like LD, 1= FastPathWB enabled, Raptor like LD |
| 1.3.6.1.4.1.3582.4.1.4.3.1.2.1.38 | ColumnpeerHasNoAccess | read-only | optional | Peer can't access this shared ld, not applicable for exclusive LD |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3 | TablevdSpanInfoTable | not-accessible | optional | A List of span Entries containing Information/Properties vd span. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3.1 | RowvdSpanInfoEntry | not-accessible | optional | An Entry in the vdSpan Table. |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3.1.1 | ColumnspanID | read-only | optional | The unique Span ID |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3.1.2 | ColumnvdID-VSIT | read-only | optional | The Virtual Device ID |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3.1.3 | ColumnstartBlock | read-only | optional | Span physical disk starting block |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3.1.4 | ColumnnumBlocks | read-only | optional | Span physical disk block count |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3.1.5 | ColumnvdSpanArrayRef | read-only | optional | Array reference (index) |
| 1.3.6.1.4.1.3582.4.1.4.3.1.3.1.6 | ColumnadapterID-VSIT | read-only | optional | Adapter ID |
| 1.3.6.1.4.1.3582.4.1.4.3.4 | NodearrayInfo | |||
| 1.3.6.1.4.1.3582.4.1.4.3.4.1 | ScalararrayNumber | read-only | mandatory | The present number of rows in the array table. |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2 | TablearrayTable | not-accessible | optional | A List of array Entries containing Information/Properties about the arrays. |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2.1 | RowarrayEntry | not-accessible | optional | An Entry in the array Table. |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2.1.1 | ColumnarrayID | read-only | optional | The unique array ID |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2.1.2 | ColumnarraySize | read-only | optional | Size in MB |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2.1.3 | ColumnarrayNumDrives | read-only | optional | Number of drives for this array |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2.1.4 | ColumnarrayRef | read-only | optional | Tag for the array |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2.1.5 | ColumnpdList | read-only | optional | Space separated Physical Drive identification. e.g. {devID devID devID} etc |
| 1.3.6.1.4.1.3582.4.1.4.3.4.2.1.6 | ColumnadapterID-AT | read-only | optional | Adapter ID. |
| 1.3.6.1.4.1.3582.4.1.4.3.5 | NodespareInfo | |||
| 1.3.6.1.4.1.3582.4.1.4.3.5.1 | ScalarspareDevNumber | read-only | mandatory | The present number of rows in the sparepool table. |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2 | TablespareTable | not-accessible | optional | A List of sparepool Entries containing Information/Properties about the spare drive |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2.1 | RowspareEntry | not-accessible | optional | An Entry in the sparepool Table. |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2.1.1 | ColumnspareID | read-only | optional | The unique Device ID |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2.1.2 | ColumndeviceIdentification | read-only | optional | The unique Device ID |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2.1.3 | ColumnspareType | read-only | optional | Spare type. isDedicated(0/1)isRevertible(0/1)isEnclAffinity(0/1). 1 implies particular feature is enable and 0 represent feature is disable. |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2.1.4 | ColumnarrayCount | read-only | optional | The number of arrays to which the Physical Drive can be dedicated |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2.1.5 | ColumnarrayIDs | read-only | optional | Comma separated array ids. e.g. 2,4,5 etc |
| 1.3.6.1.4.1.3582.4.1.4.3.5.2.1.6 | ColumnadapterID-ST | read-only | optional | Adapter ID. |
| 1.3.6.1.4.1.3582.4.1.5 | NodeenclosureInfo | |||
| 1.3.6.1.4.1.3582.4.1.5.1 | ScalarenclosureNumber | read-only | mandatory | The present number of rows in the enclosure table. |
| 1.3.6.1.4.1.3582.4.1.5.2 | TableenclosureTable | not-accessible | optional | A List of Enclosure Entries containing Information/Properties about the enclosures in the system. |
| 1.3.6.1.4.1.3582.4.1.5.2.1 | RowenclosureEntry | not-accessible | mandatory | An Entry in the enclosure table. |
| 1.3.6.1.4.1.3582.4.1.5.2.1.1 | ColumnenclosureID | read-only | optional | EnclosureID for this enclosure.(Unique) |
| 1.3.6.1.4.1.3582.4.1.5.2.1.2 | ColumndeviceId | read-only | optional | Enclosure device Id. |
| 1.3.6.1.4.1.3582.4.1.5.2.1.3 | ColumnenclosureIndex | read-only | optional | Firmware internal enclosure index |
| 1.3.6.1.4.1.3582.4.1.5.2.1.4 | ColumnslotCount | read-only | optional | Number of slots |
| 1.3.6.1.4.1.3582.4.1.5.2.1.5 | ColumnpsCount | read-only | optional | Number of power supplies |
| 1.3.6.1.4.1.3582.4.1.5.2.1.6 | ColumnfanCount | read-only | optional | Number of fans |
| 1.3.6.1.4.1.3582.4.1.5.2.1.7 | ColumntempSensorCount | read-only | optional | Number of temperature sensors |
| 1.3.6.1.4.1.3582.4.1.5.2.1.8 | ColumnalarmCount | read-only | optional | Number of alarms |
| 1.3.6.1.4.1.3582.4.1.5.2.1.9 | ColumnsimCount | read-only | optional | Number of SIM modules |
| 1.3.6.1.4.1.3582.4.1.5.2.1.10 | ColumnisFault | read-only | optional | Enclosure has entered a FAULT state or not. Values: false(0),true(1) |
| 1.3.6.1.4.1.3582.4.1.5.2.1.11 | ColumnpdCount | read-only | optional | Number of physical drives present |
| 1.3.6.1.4.1.3582.4.1.5.2.1.12 | ColumnpdIds | read-only | optional | Physical drive deviceIds space separated. |
| 1.3.6.1.4.1.3582.4.1.5.2.1.13 | ColumnadapterID-ET | read-only | optional | Adapter ID. |
| 1.3.6.1.4.1.3582.4.1.5.2.1.14 | ColumnpdCountSpinup60 | read-only | optional | Number of drives that can spun up in 60 sec. |
| 1.3.6.1.4.1.3582.4.1.5.2.1.15 | ColumnenclosureType | read-only | optional | Information about type of enclosure : 0= UNKNOWN ,1= SAFTE ,2=SES ,3= SGPIO ,4=OEM specific |
| 1.3.6.1.4.1.3582.4.1.5.2.1.16 | ColumnenclFirmwareVersion | read-only | optional | Information about enclosure FW Version |
| 1.3.6.1.4.1.3582.4.1.5.2.1.17 | ColumnenclSerialNumber | read-only | optional | Enclosure Serial Number |
| 1.3.6.1.4.1.3582.4.1.5.2.1.18 | ColumnvendorID | read-only | optional | Enclosure Vendor ID |
| 1.3.6.1.4.1.3582.4.1.5.2.1.19 | ColumnproductID | read-only | optional | Enclosure Product ID |
| 1.3.6.1.4.1.3582.4.1.5.2.1.20 | ColumneSMSerialNumber | read-only | optional | IBM Enclosure ESM Serial Number |
| 1.3.6.1.4.1.3582.4.1.5.2.1.21 | ColumneSMFRU | read-only | optional | Information about IBM Enclosure ESM FRU |
| 1.3.6.1.4.1.3582.4.1.5.2.1.22 | ColumnenclosureZoningMode | read-only | optional | Enclosure IBM Zoning Mode |
| 1.3.6.1.4.1.3582.4.1.5.2.1.23 | ColumneSMFRUPartInfo | read-only | optional | Information about IBM Enclosure ESM FRU Part |
| 1.3.6.1.4.1.3582.4.1.5.3 | TableenclosureFanTable | not-accessible | optional | A List of fan Entries containing Information/Properties about the enclosureFan. |
| 1.3.6.1.4.1.3582.4.1.5.3.1 | RowenclosureFanEntry | not-accessible | mandatory | An Entry in the enclosureFan table. |
| 1.3.6.1.4.1.3582.4.1.5.3.1.1 | ColumnfanID | read-only | optional | ID for this EnclosureFan.(Unique) |
| 1.3.6.1.4.1.3582.4.1.5.3.1.2 | ColumnenclosureId | read-only | optional | Enclosure ID where the fan is attached |
| 1.3.6.1.4.1.3582.4.1.5.3.1.3 | ColumnfanStatus | read-only | optional | status of the fan |
| 1.3.6.1.4.1.3582.4.1.5.4 | TableenclosureSlotTable | not-accessible | optional | A List of slot Entries containing Information/Properties about the enclosure slots. |
| 1.3.6.1.4.1.3582.4.1.5.4.1 | RowenclosureSlotEntry | not-accessible | mandatory | An Entry in the enclosureSlot table. |
| 1.3.6.1.4.1.3582.4.1.5.4.1.1 | ColumnslotID | read-only | optional | ID for this slot.(Unique) |
| 1.3.6.1.4.1.3582.4.1.5.4.1.2 | ColumnenclosureId-EST | read-only | optional | enclosure ID |
| 1.3.6.1.4.1.3582.4.1.5.4.1.3 | ColumnslotStatus | read-only | optional | status of the device |
| 1.3.6.1.4.1.3582.4.1.5.5 | TableenclosurePowerSupplyTable | not-accessible | optional | A List of powerSupply Entries containing Information/Properties about the enclosure powerSupply |
| 1.3.6.1.4.1.3582.4.1.5.5.1 | RowenclosurePowerSupplyEntry | not-accessible | mandatory | An Entry in the powerSupply table. |
| 1.3.6.1.4.1.3582.4.1.5.5.1.1 | ColumnpowerSupplyID | read-only | optional | ID for this powerSupply.(Unique) |
| 1.3.6.1.4.1.3582.4.1.5.5.1.2 | ColumnenclosureId-EPST | read-only | optional | Enclosure id for the powerSupply |
| 1.3.6.1.4.1.3582.4.1.5.5.1.3 | ColumnpowerSupplyStatus | read-only | optional | Status of the power Supply |
| 1.3.6.1.4.1.3582.4.1.5.6 | TableenclosureTempSensorTable | not-accessible | optional | A List of TempSensor Entries containing Information/Properties about the enclosure TempSensor |
| 1.3.6.1.4.1.3582.4.1.5.6.1 | RowenclosureTempSensorEntry | not-accessible | mandatory | An Entry in the adapter table. |
| 1.3.6.1.4.1.3582.4.1.5.6.1.1 | ColumntempSensorID | read-only | optional | ID for this TempSensor.(Unique) |
| 1.3.6.1.4.1.3582.4.1.5.6.1.2 | ColumnenclosureId-ETST | read-only | optional | Enclosure id for this TempSensor |
| 1.3.6.1.4.1.3582.4.1.5.6.1.3 | ColumntempSensorStatus | read-only | optional | Status of the Temparature Sensor |
| 1.3.6.1.4.1.3582.4.1.5.6.1.4 | ColumnenclosureTemperature | read-only | optional | Current temperature in degree Centigrade |
| 1.3.6.1.4.1.3582.4.1.5.7 | TableenclosureAlarmTable | not-accessible | optional | A List of Alarm Entries containing Information/Properties about enclosure Alarms |
| 1.3.6.1.4.1.3582.4.1.5.7.1 | RowenclosureAlarmEntry | not-accessible | mandatory | An Entry in the enclosureAlarm table. |
| 1.3.6.1.4.1.3582.4.1.5.7.1.1 | ColumnalarmID | read-only | optional | ID for this Alarm.(Unique) |
| 1.3.6.1.4.1.3582.4.1.5.7.1.2 | ColumnenclosureId-EAT | read-only | optional | Enclosure id where the Alarm is attached |
| 1.3.6.1.4.1.3582.4.1.5.7.1.3 | ColumnalarmStatus | read-only | optional | Status of the alarm |
| 1.3.6.1.4.1.3582.4.1.5.8 | TableenclosureSIMTable | not-accessible | optional | A List of SIM Entries containing Information/Properties about enclosure SIMs |
| 1.3.6.1.4.1.3582.4.1.5.8.1 | RowenclosureSIMEntry | not-accessible | mandatory | An Entry in the enclosureSIM table. |
| 1.3.6.1.4.1.3582.4.1.5.8.1.1 | ColumnsimID | read-only | optional | ID for this SIM.(Unique) |
| 1.3.6.1.4.1.3582.4.1.5.8.1.2 | ColumnenclosureId-ESIT | read-only | optional | Inclosure ID where the SIM is attached |
| 1.3.6.1.4.1.3582.4.1.5.8.1.3 | ColumnsimStatus | read-only | optional | Status of the SIM |
| 1.3.6.1.4.1.3582.4.1.6 | NodeadapterTraps | |||
| 1.3.6.1.4.1.3582.4.1.6.1001 | ScalaratAdpNumber | read-only | optional | Adapter ID for which Trap is generated. |
| 1.3.6.1.4.1.3582.4.1.6.1002 | ScalaratAlarmState | read-only | optional | Alarm disabled/enabled. Values: disabled(0),enabled(1) |
| 1.3.6.1.4.1.3582.4.1.6.1003 | ScalaratRate | read-only | optional | BGI/Check Consistency/Rebuild/Patrol Read/Reconstruction Rate |
| 1.3.6.1.4.1.3582.4.1.6.1004 | ScalaratFlashImageName | read-only | optional | Flash Image Name |
| 1.3.6.1.4.1.3582.4.1.6.1005 | ScalaratID | read-only | optional | ID |
| 1.3.6.1.4.1.3582.4.1.6.1006 | ScalarclustCtrlpropReset | read-only | optional | Resetting controller property |
| 1.3.6.1.4.1.3582.4.1.6.8001 | NodeadpAlarmStateEnabled | Alarm has been enabled by user for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8002 | NodeadpBGIRateChanged | Background initialization rate changed to $1 for Adapter $2 | ||
| 1.3.6.1.4.1.3582.4.1.6.8003 | NodeadpCacheDiscarded | Controller $1 cache discarded due to memory/battery problems | ||
| 1.3.6.1.4.1.3582.4.1.6.8004 | NodeadpCacheRebootCantRecover | Unable to recover cache data due to configuration mismatch for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8005 | NodeadpCacheRebootRecover | Cache data recovered successfully for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8006 | NodeadpCacheVersionMismatch | Controller cache discarded due to firmware version incompatibility for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8007 | NodeadpCCRateChanged | Consistency Check rate changed to $1 for Adapter $2 | ||
| 1.3.6.1.4.1.3582.4.1.6.8008 | NodeadpFlashBadImage | Flash downloaded image corrupted for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8009 | NodeadpFlashEraseError | Flash erase error for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8010 | NodeadpFlashEraseTimeout | Flash timeout during erase for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8011 | NodeadpFlashGeneralError | Flash error for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8012 | NodeadpFlashImage | Flashing image: $1 for Adapter $2 | ||
| 1.3.6.1.4.1.3582.4.1.6.8013 | NodeadpFlashOK | Flash of new firmware image(s)complete for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8014 | NodeadpFlashProgramError | Flash programming error for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8015 | NodeadpFlashProgramTimeout | Flash timeout during programming for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8016 | NodeadpLogCleared | Event log cleared for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8017 | NodeadpLogWrapped | Event log wrapped for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8018 | NodeadpPatrolReadComplete | Patrol Read complete for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8019 | NodeadpPatrolReadPaused | Patrol Read paused for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8020 | NodeadpPatrolReadResumed | Patrol Read resumed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8021 | NodeadpPatrolReadStarted | Patrol Read started for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8022 | NodeadpShutdown | Shutdown command received for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8023 | NodeadpHibernate | Hibernate command received for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8024 | NodeadpCrash | Fatal error received for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8025 | NodeadpRRChanged | Rebuild rate changed to $1 for Adapter $2 | ||
| 1.3.6.1.4.1.3582.4.1.6.8026 | NodeadpPRRateChanged | Patrol Read rate changed to $1 for Adapter $2 | ||
| 1.3.6.1.4.1.3582.4.1.6.8027 | NodeadpAlarmStateDisabled | Alarm has been disabled by user for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8028 | NodeadpConfigCleared | Configuration cleared for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8029 | NodeadpReconRateChanged | Reconstruction rate changed to $1 for Adapter $2 | ||
| 1.3.6.1.4.1.3582.4.1.6.8030 | NodeadpDefault | Factory defaults restored for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8031 | NodebbuPresent | Battery Present for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8032 | NodebbuNotPresent | Battery Not Present for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8033 | NodebbuNewBattery | New Battery Detected for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8034 | NodebbuReplaced | Battery has been replaced for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8035 | NodebbuTempHigh | Battery temperature is high for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8036 | NodebbuVoltageLow | Battery voltage low for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8037 | NodebbuCharging | Battery started charging for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8038 | NodebbuDisCharging | Battery is discharging for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8039 | NodebbuTempNormal | Battery temperature is normal for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8040 | NodebbuReplace | Battery needs replacement, SOH Bad for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8041 | NodebbuRelearnStarted | Battery relearn started for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8042 | NodebbuRelearnProgress | Battery relearn in progress for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8043 | NodebbuRelearnComplete | Battery relearn completed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8044 | NodebbuRelearnTimeout | Battery relearn timed out for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8045 | NodebbuRelearnPending | Battery relearn pending: Battery is under charge for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8046 | NodebbuRelearnPostponed | Battery relearn postponed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8047 | NodebbuRemoved | Battery removed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8048 | NodebbuCapacityLow | Current capacity of the battery is below threshold for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8049 | NodebbuCapacityAbove | Current capacity of the battery is above threshold for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8050 | NodebbuFRUChanged | Bbu FRU for Adapter $1 changed | ||
| 1.3.6.1.4.1.3582.4.1.6.8051 | NoderevisionIdentifierChanged | Revision Identifier for Adapter $1 changed | ||
| 1.3.6.1.4.1.3582.4.1.6.8052 | NodeadpLockKeyCreated | Drive security key created for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8053 | NodeadpLockKeyBackedup | Drive security key backed up for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8054 | NodeadpLockKeyVerifiedEscrow | Drive security key from escrow, verified for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8055 | NodeadpLockKeyRekeyed | Drive security key changed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8056 | NodeadpLockKeyRekeyFailed | Drive security key, re-key operation failed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8057 | NodeadpLockKeyInvalid | Drive security key is invalid for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8058 | NodeadpLockKeyDestroyed | Drive security key destroyed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8059 | NodeadpEscrowKeyInvalid | Drive security key from escrow is invalid for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8060 | NodeadpLockKeyFailed | Drive security key failure, cannot access secured configuration for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8061 | NodebbuChargeDisabled | Battery charging was suspended due to high battery temperature on Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8062 | NodebbuMicrocodeUpdated | Battery NVCache firmware update was successful on Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8063 | NodebbuMicrocodeUpdateFailed | Battery NVCache firmware update failed on Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8064 | NodehaNodeJoin | Peer controller entered HA Domain at Adapter -$1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8065 | NodehaNodeBreak | Peer controller exited HA Domain at Adapter -$1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8066 | NodehaPeerIncompatible | Peer controller settings are incompatible | ||
| 1.3.6.1.4.1.3582.4.1.6.8067 | NodehaCtrlpropIncompatible | Controller property mismatch detected with Peer controller | ||
| 1.3.6.1.4.1.3582.4.1.6.8068 | NodehaFWVersionMismatch | FW version does not match Peer controller | ||
| 1.3.6.1.4.1.3582.4.1.6.8069 | NodehaCacheMirrorOnline | Cache mirroring is online | ||
| 1.3.6.1.4.1.3582.4.1.6.8070 | NodehaCacheMirrorOffline | Cache mirroring is offline | ||
| 1.3.6.1.4.1.3582.4.1.6.8071 | NodeadpPropChanged | Controller properties changed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8072 | NodeadpResetNowStart | Controller reset requested by host for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8073 | NodeadpResetNowDone | Controller reset requested by host, completed for Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8074 | NodepeerControllerKeyMismatch | Peer controller security key mismatch | ||
| 1.3.6.1.4.1.3582.4.1.6.8075 | NodepeerControllerKeyMatch | Peer controller security key match | ||
| 1.3.6.1.4.1.3582.4.1.6.8077 | NodecfgAutoCreated | Configuration automatically created on Adapter $1 | ||
| 1.3.6.1.4.1.3582.4.1.6.8078 | NodenvcacheBlockRecoverySkipped | Block recovery is skipped for Cache-vault. Reboot the system to recover the blocks $1 | ||
| 1.3.6.1.4.1.3582.4.1.7 | NodevdTraps | |||
| 1.3.6.1.4.1.3582.4.1.7.1101 | ScalarvdNumber | read-only | optional | vd Target ID for which Trap is generated. |
| 1.3.6.1.4.1.3582.4.1.7.1102 | ScalarvdSeq | read-only | optional | vd Sequence no for which Trap is generated. |
| 1.3.6.1.4.1.3582.4.1.7.1103 | ScalarvdProg | read-only | optional | progress % |
| 1.3.6.1.4.1.3582.4.1.7.1104 | ScalarvdCachePolicyChangeReason | read-only | optional | VD cache policy. |
| 1.3.6.1.4.1.3582.4.1.7.1105 | ScalarvdNewState | read-only | optional | Virtual Drive state. Values are: offline(0),partially-degraded(1),degraded(2),optimal(3) |
| 1.3.6.1.4.1.3582.4.1.7.1106 | ScalarvdOldState | read-only | optional | Virtual Drive state. Values are: offline(0),partially-degraded(1),degraded(2),optimal(3) |
| 1.3.6.1.4.1.3582.4.1.7.1107 | ScalarisRemote | read-only | optional | HA cluster locale: 0=local, 1=remote (at peer) |
| 1.3.6.1.4.1.3582.4.1.7.1108 | ScalarvdOldAccessPolicy | read-only | optional | Virtual Drive access policy. Values are: read/write(0), read-only(2), blocked(3), transport-ready(14), hidden(15) |
| 1.3.6.1.4.1.3582.4.1.7.1109 | ScalarvdNewAccessPolicy | read-only | optional | Virtual Drive access policy. Values are: read/write(0), read-only(2), blocked(3), transport-ready(14), hidden(15) |
| 1.3.6.1.4.1.3582.4.1.7.1110 | ScalarvdOldAutoSnapshot | read-only | optional | Virtual Drive auto snapshot. Values are: enabled(1), disabled(0) |
| 1.3.6.1.4.1.3582.4.1.7.1111 | ScalarvdNewAutoSnapshot | read-only | optional | Virtual Drive auto snapshot. Values are: enabled(1), disabled(0) |
| 1.3.6.1.4.1.3582.4.1.7.1112 | ScalarvdOldcacheBypassIOSize | read-only | optional | Virtual Drive cache bypass IO size. Values are: 64k(0), 128k(1), 256k(2) |
| 1.3.6.1.4.1.3582.4.1.7.1113 | ScalarvdNewcacheBypassIOSize | read-only | optional | Virtual Drive cache bypass IO size. Values are: 64k(0), 128k(1), 256k(2) |
| 1.3.6.1.4.1.3582.4.1.7.1114 | ScalarvdOldcacheBypassMode | read-only | optional | Virtual Drive cache bypass mode. Values are: intelligent(0), standard(1), custom_mode_1(2), custom_mode_2(3), custom_mode_3(4), reserved_mode_1(5), reserved_mo… |
| 1.3.6.1.4.1.3582.4.1.7.1115 | ScalarvdNewcacheBypassMode | read-only | optional | Virtual Drive cache bypass mode. Values are: intelligent(0), standard(1), custom_mode_1(2), custom_mode_2(3), custom_mode_3(4), reserved_mode_1(5), reserved_mo… |
| 1.3.6.1.4.1.3582.4.1.7.1116 | ScalarvdOldcurrentCachePolicy | read-only | optional | Virtual Drive current cache policy. Values are: write-back(1), write-adaptive(2), read-ahead(4), read-adaptive(8), write-cache-bad-bbu(16), allow-write-cache(3… |
| 1.3.6.1.4.1.3582.4.1.7.1117 | ScalarvdNewcurrentCachePolicy | read-only | optional | Virtual Drive current cache policy. Values are: write-back(1), write-adaptive(2), read-ahead(4), read-adaptive(8), write-cache-bad-bbu(16), allow-write-cache(3… |
| 1.3.6.1.4.1.3582.4.1.7.1118 | ScalarvdOldcurrentPSPolicy | read-only | optional | Virtual Drive current powersave policy. Values are: ctrl-default(0), auto(1), max(2), no-cache(4), t10(8), none(254), reserved(255) |
| 1.3.6.1.4.1.3582.4.1.7.1119 | ScalarvdNewcurrentPSPolicy | read-only | optional | Virtual Drive current powersave policy. Values are: ctrl-default(0), auto(1), max(2), no-cache(4), t10(8), none(254), reserved(255) |
| 1.3.6.1.4.1.3582.4.1.7.1120 | ScalarvdOlddefaultCachePolicy | read-only | optional | Virtual Drive default cache policy. Values are: write-back(1), write-adaptive(2), read-ahead(4), read-adaptive(8), write-cache-bad-bbu(16), allow-write-cache(3… |
| 1.3.6.1.4.1.3582.4.1.7.1121 | ScalarvdNewdefaultCachePolicy | read-only | optional | Virtual Drive default cache policy. Values are: write-back(1), write-adaptive(2), read-ahead(4), read-adaptive(8), write-cache-bad-bbu(16), allow-write-cache(3… |
| 1.3.6.1.4.1.3582.4.1.7.1122 | ScalarvdOlddefaultPSPolicy | read-only | optional | Virtual Drive default powersave policy. Values are: ctrl-default(0), auto(1), max(2), no-cache(4), t10(8), none(254), reserved(255) |
| 1.3.6.1.4.1.3582.4.1.7.1123 | ScalarvdNewdefaultPSPolicy | read-only | optional | Virtual Drive default powersave policy. Values are: ctrl-default(0), auto(1), max(2), no-cache(4), t10(8), none(254), reserved(255) |
| 1.3.6.1.4.1.3582.4.1.7.1124 | ScalarvdOlddisableAutoDeleteOldestPIT | read-only | optional | Virtual drive disable auto delete oldest pit. Values are: enabled(1), disabled(0) |
| 1.3.6.1.4.1.3582.4.1.7.1125 | ScalarvdNewdisableAutoDeleteOldestPIT | read-only | optional | Virtual Drive disable auto delete oldest pit. Values are: enabled(1), disabled(0) |
| 1.3.6.1.4.1.3582.4.1.7.1126 | ScalarvdOlddiskCachePolicy | read-only | optional | Virtual Drive disk cache policy. Values are: unchanged(0), enabled(1), disabled(2) |
| 1.3.6.1.4.1.3582.4.1.7.1127 | ScalarvdNewdiskCachePolicy | read-only | optional | Virtual Drive disk cache policy. Values are: unchanged(0), enabled(1), disabled(2) |
| 1.3.6.1.4.1.3582.4.1.7.1128 | ScalarvdOldemulationType | read-only | optional | Virtual Drive emulation type. Values are: default(0), disabled(1) |
| 1.3.6.1.4.1.3582.4.1.7.1129 | ScalarvdNewemulationType | read-only | optional | Virtual Drive emulation type. Values are: default(0), disabled(1) |
| 1.3.6.1.4.1.3582.4.1.7.1130 | ScalarvdOldenabledAtomicityType | read-only | optional | Virtual Drive enabled automicity type. Values are: disabled(0), write-all(1), write-t10(2) |
| 1.3.6.1.4.1.3582.4.1.7.1131 | ScalarvdNewenabledAtomicityType | read-only | optional | Virtual Drive enabled automicity type. Values are: disabled(0), write-all(1), write-t10(2) |
| 1.3.6.1.4.1.3582.4.1.7.1132 | ScalarvdOldexclusiveAccess | read-only | optional | Virtual Drive exclusive access. Values are: true(1), false(0) |
| 1.3.6.1.4.1.3582.4.1.7.1133 | ScalarvdNewexclusiveAccess | read-only | optional | Virtual Drive exclusive access. Values are: true(1), false(0) |
| 1.3.6.1.4.1.3582.4.1.7.1134 | ScalarvdOldforceEmulation | read-only | optional | Virtual Drive force emulation. Values are: set(1), not-set(0) |
| 1.3.6.1.4.1.3582.4.1.7.1135 | ScalarvdNewforceEmulation | read-only | optional | Virtual Drive force emulation. Values are: set(1), not-set(0) |
| 1.3.6.1.4.1.3582.4.1.7.1136 | ScalarvdOldname | read-only | optional | Virtual Drive name |
| 1.3.6.1.4.1.3582.4.1.7.1137 | ScalarvdNewname | read-only | optional | Virtual Drive name |
| 1.3.6.1.4.1.3582.4.1.7.1138 | ScalarvdOldnoBGI | read-only | optional | Virtual Drive set no BGI. Values are: 1(disabled), 0 (enabled) |
| 1.3.6.1.4.1.3582.4.1.7.1139 | ScalarvdNewnoBGI | read-only | optional | Virtual Drive set no BGI. Values are: 1(disabled), 0 (enabled) |
| 1.3.6.1.4.1.3582.4.1.7.1140 | ScalarvdOldscsiUnmapEnabled | read-only | optional | Virtual Drive SCSI unmap enabled. Values are: 0(disabled), 1(enabled) |
| 1.3.6.1.4.1.3582.4.1.7.1141 | ScalarvdNewscsiUnmapEnabled | read-only | optional | Virtual Drive SCSI unmap enabled. Values are: 0(disabled), 1(enabled) |
| 1.3.6.1.4.1.3582.4.1.7.1142 | ScalarvdOldSSCWriteBuferMode | read-only | optional | Virtual Drive SSC write buffer mode. Values are: 0(disabled), 1(enabled) |
| 1.3.6.1.4.1.3582.4.1.7.1143 | ScalarvdNewSSCWriteBuferMode | read-only | optional | Virtual Drive SSC write buffer mode. Values are: 0(disabled), 1(enabled) |
| 1.3.6.1.4.1.3582.4.1.7.8101 | NodevdtBGIAborted | BGI aborted on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8102 | NodevdtBGICompleted | BGI completed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8103 | NodevdtBGIDoneWR | BGI completed with uncorrectable errors on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8104 | NodevdtBGIFailed | BGI failed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8105 | NodevdtBGIStarted | BGI started on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8107 | NodevdtCCStarted | CC started on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8108 | NodevdtCCCompleted | CC completed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8109 | NodevdtCCFailed | CC failed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8110 | NodevdtCCAborted | CC aborted on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8111 | NodevdtCCCompCor | CC completed with correction on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8112 | NodevdtInitAborted | Initialization aborted on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8113 | NodevdtInitFailed | Initialization failed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8114 | NodevdtInitCompleted | Initialization completed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8115 | NodevdtInitFastStarted | Fast Initialization started on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8116 | NodevdtInitFullStarted | Full Initialization started on Adapter-$1 VD Target-$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8117 | NodevdtReconStarted | Reconstruction started on Adapter-$1 VD Target-$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8118 | NodevdtReconCompleted | Reconstruction completed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8119 | NodevdtReconResumed | Reconstruction resumed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8120 | NodevdtReconStopped | Reconstruction stopped on Adapter-$1 VD Target-$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8121 | NodevdtStateChange | VD state changed on Adapter -$1 VD Target -$2 from $3 to $4 | ||
| 1.3.6.1.4.1.3582.4.1.7.8122 | NodevdtCreated | A new VD created on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8123 | NodevdtDeleted | A VD deleted on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8124 | NodevdtSecured | VD is now secured. Adapter -$1 VD Targt -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8125 | NodevdtPartiallySecured | VD is partially secured. Adapter -$1 VD Targt -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8126 | NodevdtBbmLogCleared | VD bad block table cleared on Adapter -$1 VD Targt -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8127 | NodevdtERASEAborted | LD Erase aborted on aborted on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8128 | NodevdtERASECompleted | LD Erase completed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8129 | NodevdtERASEFailed | LD Erase failed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8130 | NodevdtERASEStarted | LD Erase started on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8131 | NodevdtSSCDISASSOCIATEStarted | CacheCade(TM) disassociate started on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8132 | NodevdtSSCDISASSOCIATECompleted | CacheCade(TM) disassociate completed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8133 | NodevdtSSCDISASSOCIATEFailed | CacheCade(TM) disassociate failed on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8134 | NodevdtSSCDISASSOCIATEAborted | CacheCade(TM) disassociate aborted by user on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8135 | NodevdtACCESSBLOCKEDSSCOFFLINE | Access blocked as cached data in CacheCade(TM) is unavailable on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8136 | NodehaLDIsRemote | Peer controller now manages LD on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8137 | NodehaLDIsLocal | Local controller now manages VD on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8138 | NodehaLDTargetIDConflict | Target ID conflict detected. VD on Adapter -$1 VD Target -$2 Remote VD -$3 access is restricted from Peer controller | ||
| 1.3.6.1.4.1.3582.4.1.7.8139 | NodehaLDAccessShared | Shared access set for VD on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8140 | NodehaLDAccessExclusive | Exclusive access set for VD on Adapter -$1 VD Target -$2 Remote VD -$3 | ||
| 1.3.6.1.4.1.3582.4.1.7.8141 | NodehaLDIncompatible | Adapter -$1 VD Target -$2 Remote VD -$3 is incompatible in the HA domain | ||
| 1.3.6.1.4.1.3582.4.1.7.8142 | NodevdAccessBlockedPeerUnavailable | Cached data from peer controller is unavailable. LD on Adapter -$1 VD Target -$2 Remote VD -$3 access policy is set to Blocked | ||
| 1.3.6.1.4.1.3582.4.1.7.8143 | NodehaLDCompatible | Adapter -$1 VD Target -$2 Remote VD -$3 is compatible in the HA domain | ||
| 1.3.6.1.4.1.3582.4.1.7.8144 | NodevdPropChanged | Adapter -$1 VD Target -$2 Properties changed. Access policy to $3, currentCachePolicy to $4, currentPSPolicy to $5, defaultCachePolicy to $6, defaultPSPolicy t… | ||
| 1.3.6.1.4.1.3582.4.1.8 | NodepdTraps | |||
| 1.3.6.1.4.1.3582.4.1.8.1201 | ScalarpdID | read-only | optional | Device ID for which Trap is generated. |
| 1.3.6.1.4.1.3582.4.1.8.1202 | ScalarpdEncIndex | read-only | optional | Enclosure index(0 means not within an enclosure) for which Trap is generated. |
| 1.3.6.1.4.1.3582.4.1.8.1203 | ScalarpdSlotNo | read-only | optional | Slot no for the enclosure |
| 1.3.6.1.4.1.3582.4.1.8.1204 | ScalarpdNewState | read-only | optional | Physical Drive state. Values are: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64) |
| 1.3.6.1.4.1.3582.4.1.8.1205 | ScalarpdOldState | read-only | optional | Physical Drive state. Values are: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64) |
| 1.3.6.1.4.1.3582.4.1.8.1206 | ScalarpdEnclDeviceId | read-only | optional | Enclosure Device ID for which Trap is generated. |
| 1.3.6.1.4.1.3582.4.1.8.1207 | ScalarpdSASAdd | read-only | optional | Device SAS addresses. Comma separeted for multiple address. |
| 1.3.6.1.4.1.3582.4.1.8.1208 | ScalarpdPath | read-only | optional | PD path. |
| 1.3.6.1.4.1.3582.4.1.8.1209 | ScalarpdFRU | read-only | optional | PD FRU for which trap is generated. |
| 1.3.6.1.4.1.3582.4.1.8.1210 | ScalarpdNewPowerState | read-only | optional | New Power Status Of the Device.Values are device is active(0),device is stopped(1),device is transitioning between power states(255) |
| 1.3.6.1.4.1.3582.4.1.8.8201 | NodepdtClearAborted | Physical Drive Clear aborted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8202 | NodepdtClearFailed | Physical Drive Clear failed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8203 | NodepdtClearStarted | Physical Drive Clear started on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8204 | NodepdtClearCompleted | Physical Drive Clear completed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8205 | NodepdtError | Error occurred on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8206 | NodepdtFormatStart | Physical Drive format started on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8207 | NodepdtFormatCompleted | Physical Drive format completed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8208 | NodepdtInserted | PD inserted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8209 | NodepdtRblAborted | Rebuild aborted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8210 | NodepdtRblCompleted | Rebuild completed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8211 | NodepdtRblFailedBS | Rebuild failed(bad source) on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8212 | NodepdtRblFailedBT | Rebuild failed(bad target) on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8213 | NodepdtRblStart | Rebuild started on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8214 | NodepdtRblResumed | Rebuild resumed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8215 | NodepdtRblStartA | Rebuild started(auto) on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8216 | NodepdtRemoved | Physical Drive removed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8217 | NodepdtStateChange | PD state changed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 from $5 to $6 | ||
| 1.3.6.1.4.1.3582.4.1.8.8218 | NodepdtRedundantPathBroken | Redundant Path Broken For Physical Drive on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 EncDevId -$5 pdSAS -$6 | ||
| 1.3.6.1.4.1.3582.4.1.8.8219 | NodepdtRedundantPathRestored | Redundant Path Restored For Physical Drive on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 EncDevId -$5 pdSAS -$6 | ||
| 1.3.6.1.4.1.3582.4.1.8.8220 | NodepdtRedundantEnclModuleInserted | Redundant Encl Modul Inserted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 EncDevId -$5 pdSAS -$6 pdpath -$7 | ||
| 1.3.6.1.4.1.3582.4.1.8.8221 | NodepdtRedundantEnclModuleRemoved | Redundant Encl Modul Removed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 EncDevId -$5 pdSAS -$6 pdpath -$7 | ||
| 1.3.6.1.4.1.3582.4.1.8.8222 | NodepdtFRU | FRU changed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 EncDevId -$5 -FRU $6 | ||
| 1.3.6.1.4.1.3582.4.1.8.8223 | NodepdtSecured | PD security activated on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8224 | NodepdtUnsecured | PD security disabled on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8225 | NodepdtReprovisioned | PD is reprovisioned on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8226 | NodepdtLockKeyRekeyed | PD security key changed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8227 | NodepdtSecurityFailure | Security subsystem problems detected on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8228 | NodepdtPowerStateChange | Power State Change on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 NewPowerState -$5 | ||
| 1.3.6.1.4.1.3582.4.1.8.8229 | NodepdtNotSupported | PD Not Supported on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8230 | NodepdtNotCertified | PD Not Certified on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8231 | NodepdtERASEAborted | PD Erase aborted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8232 | NodepdtERASECompleted | PD Erase completed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8233 | NodepdtERASEStarted | PD Erase started on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8234 | NodepdtERASEFailed | PD Erase Failed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8235 | NodehaPDIsRemote | Peer controller now manages PD on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8236 | NodehaPDIsLocal | Local controller now manages PD on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| 1.3.6.1.4.1.3582.4.1.8.8237 | NodepdtLOCATEStart | Locate LED started on PD Adapter -$1 PD -$2 | ||
| 1.3.6.1.4.1.3582.4.1.8.8238 | NodepdtLOCATEStop | Locate LED stopped on PD Adapter -$1 PD -$2 | ||
| 1.3.6.1.4.1.3582.4.1.9 | NodeenclTraps | |||
| 1.3.6.1.4.1.3582.4.1.9.1301 | ScalaratPort | read-only | optional | Prot no. |
| 1.3.6.1.4.1.3582.4.1.9.1302 | ScalaronPHY | read-only | optional | PHY no |
| 1.3.6.1.4.1.3582.4.1.9.8330 | NodewidePortLinkLost | Link lost on SAS wide port on Adapter -$1 port -$2 PHY -$3 | ||
| 1.3.6.1.4.1.3582.4.1.9.8331 | NodewidePortLinkRestored | Link Restored on SAS wide port on Adapter -$1 port -$2 PHY -$3 | ||
| 1.3.6.1.4.1.3582.4.1.10 | NodepciTraps | |||
| 1.3.6.1.4.1.3582.4.1.10.1501 | ScalarpciVendorId | read-only | optional | PCI VendorID |
| 1.3.6.1.4.1.3582.4.1.10.1502 | ScalarpciDeviceId | read-only | optional | PCI Device ID |
| 1.3.6.1.4.1.3582.4.1.10.1503 | ScalarpciSubVendorId | read-only | optional | PCI SubVendorID |
| 1.3.6.1.4.1.3582.4.1.10.1504 | ScalarpciSubDeviceId | read-only | optional | PCI SubDeviceID |
| 1.3.6.1.4.1.3582.4.1.10.8501 | NodehaHwIncompatible | Peer Controller hardware is incompatible | ||
| 1.3.6.1.4.1.3582.4.1.11 | NodecopyrightInfo | |||
| 1.3.6.1.4.1.3582.4.1.11.1 | Scalarcopyright | read-only | mandatory | LSI Corporation |