LUXN-MIB
3301 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4253 | NodeluxN | |||
| 1.3.6.1.4.1.4253.1 | Nodeconfiguration | |||
| 1.3.6.1.4.1.4253.1 | NodeluxNGenericTrap | This is a generic trap identifying an event for a given event source. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.1.1 | Nodemanufacturing | |||
| 1.3.6.1.4.1.4253.1.1.1 | ScalarmfgName | read-only | mandatory | Manufacturing name of the device. Up to 30 characters |
| 1.3.6.1.4.1.4253.1.1.2 | ScalarmfgDate | read-only | mandatory | Date and Time of manufacturing of the chassis |
| 1.3.6.1.4.1.4253.1.1.3 | ScalarmfgSerialNum | read-only | mandatory | Serial # of the Chassis. |
| 1.3.6.1.4.1.4253.1.1.4 | ScalarmfgModelType | not-accessible | mandatory | Model type of the chassis. Up to 10 characters |
| 1.3.6.1.4.1.4253.1.1.5 | ScalarmfgDefaultID | read-only | mandatory | Default one-time user ID. This ID should be used for the first time access to the system. This ID will not be accepted once a real user ID is added. |
| 1.3.6.1.4.1.4253.1.1.6 | ScalarmfgDfltPasswd | read-only | mandatory | Default one-time password to go with the default user ID. The password may contain non-printable characters up to 10 ASCII characters. Passwords are hashed and… |
| 1.3.6.1.4.1.4253.1.1.9 | ScalarmfgNumShelves | read-only | mandatory | Number of shelves in the chassis. This number reflects the number of rows of the table below. This number is automatically adjusted everytime a row is added to… |
| 1.3.6.1.4.1.4253.1.1.10 | TablemfgShelfTable | not-accessible | mandatory | This table represents the number of shelves and the number of slots per shelf in the chassis. |
| 1.3.6.1.4.1.4253.1.1.10.1 | RowmfgShelfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.1.10.1.1 | ColumnmfgShelfID | read-only | mandatory | Integer ID of each shelf in the chassis. The shelf number is always one for both GM1608 and GM3217. In the case of of GM3234, the bottom shelf is 1 while the t… |
| 1.3.6.1.4.1.4253.1.1.10.1.2 | ColumnmfgNumSlots | read-only | mandatory | total number of slots in a given shelf. |
| 1.3.6.1.4.1.4253.1.1.11 | ScalarmfgCRCChecksum | read-only | mandatory | 32 bit CRC of the manufacturing section. This CRC is automatically calculated everytime information is updated from the manufacturing section. The manufacturin… |
| 1.3.6.1.4.1.4253.1.1.12 | ScalarmfgChassisType | read-only | mandatory | Type of chassis. |
| 1.3.6.1.4.1.4253.1.1.13 | ScalarmfgPsType | read-only | mandatory | Type of power supplies. |
| 1.3.6.1.4.1.4253.1.1.14 | ScalarmfgCleiNum | read-only | mandatory | CLEI number for the chassis. |
| 1.3.6.1.4.1.4253.1.2 | Nodecp | |||
| 1.3.6.1.4.1.4253.1.2.1 | ScalarcpIpAddress | read-write | mandatory | IP Address of the Active Communication Processor |
| 1.3.6.1.4.1.4253.1.2.2 | ScalarcpNetMask | read-write | mandatory | Net mask for the Active Communication Processor |
| 1.3.6.1.4.1.4253.1.2.3 | ScalarcpMIBVersion | read-only | mandatory | Version of the LuxN MIB implemented by this device. This value may be reset everytime a new CP code is downloaded. |
| 1.3.6.1.4.1.4253.1.2.4 | ScalarcpBootPromVer | read-only | mandatory | The current version string of the Boot PROM code |
| 1.3.6.1.4.1.4253.1.2.5 | ScalarcpROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.2.6 | ScalarcpNumSubDiv | read-only | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.2.7 | TablecpSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.2.7.1 | RowcpSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.2.7.1.1 | ColumncpSubDivIndex | read-only | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.2.7.1.2 | ColumncpSubDivDescr | read-only | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.2.7.1.3 | ColumncpSubDivSize | read-only | mandatory | Size of each sub division in ROM in bytes |
| 1.3.6.1.4.1.4253.1.2.7.1.4 | ColumncpSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.2.7.1.5 | ColumncpSubDivImgVersion | read-only | mandatory | Display Version of each Images in ROM. |
| 1.3.6.1.4.1.4253.1.2.7.1.6 | ColumncpSubDivImgDBVersion | read-only | mandatory | Display Database Version of each Images in ROM. |
| 1.3.6.1.4.1.4253.1.2.8 | TablecpTable | not-accessible | mandatory | This table represents the information for each active or standby communication processor |
| 1.3.6.1.4.1.4253.1.2.8.1 | RowcpEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.2.8.1.1 | ColumncpCardShelf | read-only | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.1.2.8.1.2 | ColumncpCardSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.2.8.1.3 | ColumncpMode | read-only | mandatory | Type of the communication processor. The valid types are Active or Standby. |
| 1.3.6.1.4.1.4253.1.2.8.1.4 | ColumncpDsgntdMode | read-only | mandatory | Designation Type of the communication processor. The valid types are Active or Standby. |
| 1.3.6.1.4.1.4253.1.2.8.1.5 | ColumncpState | read-only | mandatory | The state of the CP card. |
| 1.3.6.1.4.1.4253.1.2.8.1.6 | ColumncpMacAddr | read-only | mandatory | MAC address of the Communication processor in HEX |
| 1.3.6.1.4.1.4253.1.2.8.1.7 | ColumncpName | read-write | mandatory | Display (Network) name of the Communication processor |
| 1.3.6.1.4.1.4253.1.2.8.1.8 | ColumncpMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the CP card |
| 1.3.6.1.4.1.4253.1.2.8.1.9 | ColumncpSerialNum | read-only | mandatory | Serial # of the CP card. |
| 1.3.6.1.4.1.4253.1.2.8.1.10 | ColumncpModelType | read-only | mandatory | Model type of the CP. |
| 1.3.6.1.4.1.4253.1.2.8.1.11 | ColumncpFWVersionID | read-only | mandatory | The current version string of the CP FW code |
| 1.3.6.1.4.1.4253.1.2.8.1.12 | ColumncpSetState | read-write | mandatory | Instruct the CP to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.2.8.1.13 | ColumncpHWName | read-only | mandatory | Display Hardware name of the CP Card. |
| 1.3.6.1.4.1.4253.1.2.8.1.14 | ColumncpCleiNum | read-only | mandatory | CLEI number of the mux/dmux Card. |
| 1.3.6.1.4.1.4253.1.2.8.1.15 | ColumncpModelNum | read-only | mandatory | Model number of the CP card. Up to 15 characters |
| 1.3.6.1.4.1.4253.1.2.9 | ScalarcpSetMode | read-write | mandatory | Toggle the Active/Standby mode of the active CP. |
| 1.3.6.1.4.1.4253.1.2.10 | ScalarcpSNMPTrapHost1 | read-write | mandatory | IP Address of the first SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.11 | ScalarcpSNMPTrapHost2 | read-write | mandatory | IP Address of the second SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.12 | ScalarcpSNMPTrapHost3 | read-write | mandatory | IP Address of the third SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.13 | ScalarcpSNMPSendTrap | read-write | mandatory | If set to true, traps will be sent out. If set to false, traps will not be sent out. This variable is reset to true (enable) on each boot cycle. |
| 1.3.6.1.4.1.4253.1.2.14 | ScalarcpGateway | read-write | mandatory | Gateway IP Address of the Active Communication Processor. A NULL IP address means Gateway hasn't been configured. |
| 1.3.6.1.4.1.4253.1.2.15 | ScalarcpMaxSessions | read-write | mandatory | Maximum allowed Telnet Sessions on the Active Communication Processor. Valid values are 1 to 6. |
| 1.3.6.1.4.1.4253.1.2.16 | ScalarcpSessionTimeout | read-write | mandatory | Maximum timeout (in seconds) that can be set for a Telnet session on the Active Communication Processor. Valid values are greater than 30 secs. |
| 1.3.6.1.4.1.4253.1.2.17 | ScalarcpDate | read-write | mandatory | Current Date on the Active Communication Processor. The format is in the form of mm-dd-yy in which mm is the two digit month, dd is the two digit day of the mo… |
| 1.3.6.1.4.1.4253.1.2.18 | ScalarcpTime | read-write | mandatory | Current Time on the Active Communication Processor. The format is in the form of hh:mm:ss in which hh is the hour, mm is the minute and ss is the second. The v… |
| 1.3.6.1.4.1.4253.1.2.19 | ScalarcpGetCommunity | read-write | mandatory | User configurable SNMP Get Community String. |
| 1.3.6.1.4.1.4253.1.2.20 | ScalarcpSetCommunity | read-write | mandatory | User Configurable SNMP Set Community String. |
| 1.3.6.1.4.1.4253.1.2.21 | ScalarcpSystemName | read-write | mandatory | User Configurable System Name. |
| 1.3.6.1.4.1.4253.1.2.22 | ScalarcpSNMPTrapCommunity1 | read-write | mandatory | User configurable trap community string for first trap host. Will return an error if the corresponding trap host is invalid or not set. |
| 1.3.6.1.4.1.4253.1.2.23 | ScalarcpSNMPTrapCommunity2 | read-write | mandatory | User configurable trap community string for second trap host. Will return an error if the corresponding trap host is invalid or not set. |
| 1.3.6.1.4.1.4253.1.2.24 | ScalarcpSNMPTrapCommunity3 | read-write | mandatory | User configurable trap community string for third trap host. Will return an error if the corresponding trap host is invalid or not set. |
| 1.3.6.1.4.1.4253.1.2.25 | ScalarcpHttp | not-accessible | mandatory | HTTP server enabled or not. |
| 1.3.6.1.4.1.4253.1.2.26 | ScalarcpIMNIpAddress | read-write | mandatory | IMN Ip address. Use for IP/IWM |
| 1.3.6.1.4.1.4253.1.2.27 | ScalarcpUpsrMode | read-write | mandatory | UPSR mode: enable and disable. |
| 1.3.6.1.4.1.4253.1.2.28 | ScalarcpAutoModuleUpdate | read-write | mandatory | Flag to automatically enable/disable module update. |
| 1.3.6.1.4.1.4253.1.2.29 | ScalarcpSNMPTrapHost4 | read-write | mandatory | IP Address of the fourth SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.30 | ScalarcpSNMPTrapHost5 | read-write | mandatory | IP Address of the fifth SNMP Trap host. A NULL IP address means no TRAP should be sent to this address. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.31 | ScalarcpSNMPTrapCommunity4 | read-write | mandatory | User configurable trap community string for fourth trap host. Will return an error if the corresponding trap host is invalid or not set. |
| 1.3.6.1.4.1.4253.1.2.32 | ScalarcpSNMPTrapCommunity5 | read-write | mandatory | User configurable trap community string for fifth trap host. Will return an error if the corresponding trap host is invalid or not set. |
| 1.3.6.1.4.1.4253.1.2.33 | ScalarcpSNMPTrapHostPort1 | read-write | mandatory | User configurable trap port for the first trap host. Default value is 162 |
| 1.3.6.1.4.1.4253.1.2.34 | ScalarcpSNMPTrapHostPort2 | read-write | mandatory | User configurable trap port for the second trap host. Default value is 162 |
| 1.3.6.1.4.1.4253.1.2.35 | ScalarcpSNMPTrapHostPort3 | read-write | mandatory | User configurable trap port for the third trap host. Default value is 162 |
| 1.3.6.1.4.1.4253.1.2.36 | ScalarcpSNMPTrapHostPort4 | read-write | mandatory | User configurable trap port for the fourth trap host. Default value is 162 |
| 1.3.6.1.4.1.4253.1.2.37 | ScalarcpSNMPTrapHostPort5 | read-write | mandatory | User configurable trap port for the fifth trap host. Default value is 162 |
| 1.3.6.1.4.1.4253.1.2.38 | TablecpRedunSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory of redundant (standby) MPM |
| 1.3.6.1.4.1.4253.1.2.38.1 | RowcpRedunSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.2.38.1.1 | ColumncpRedunSubDivIndex | read-only | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.2.38.1.2 | ColumncpRedunSubDivDescr | read-only | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.2.38.1.3 | ColumncpRedunSubDivImgVersion | read-only | mandatory | Display Version of each Images in ROM. |
| 1.3.6.1.4.1.4253.1.2.38.1.4 | ColumncpRedunSubDivImgDBVersion | read-only | mandatory | Display Database Version of each Images in ROM. |
| 1.3.6.1.4.1.4253.1.2.39 | ScalarcpTimezone | read-write | mandatory | Specifies the internation time zone used by the MPM to determine system time. The time zone is only used to system time calculations when NTP is enabled |
| 1.3.6.1.4.1.4253.1.2.40 | ScalarcpNtpState | read-write | mandatory | Specifies whether NTP support is enabled or disabled. |
| 1.3.6.1.4.1.4253.1.2.41 | ScalarcpNtpTimeserver | read-write | mandatory | Specifies the NTP time server queries for updates. |
| 1.3.6.1.4.1.4253.1.2.42 | ScalarcpNtpUpdateInterval | read-write | mandatory | Specifies the NTP time update interval in minutes. |
| 1.3.6.1.4.1.4253.1.2.43 | ScalarcpTelnetClient | read-write | mandatory | Enable/disable telnet client for active telnet sessions. |
| 1.3.6.1.4.1.4253.1.2.44 | ScalarcpLogMask | read-write | mandatory | Set the log mask. The masks are equivalent to syslog priorities. |
| 1.3.6.1.4.1.4253.1.2.45 | ScalarcpLogServer1 | read-write | mandatory | IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.46 | ScalarcpLogServer2 | read-write | mandatory | IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.47 | ScalarcpLogServer3 | read-write | mandatory | IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.48 | ScalarcpLogServer4 | read-write | mandatory | IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.2.49 | ScalarcpLogServer5 | read-write | mandatory | IP Address of the first log server. A NULL IP address will remove this entry. Duplicate IP addresses will be rejected. |
| 1.3.6.1.4.1.4253.1.3 | Nodecc | |||
| 1.3.6.1.4.1.4253.1.3.1 | ScalarccBootPromVer | not-accessible | mandatory | The current version string of the CC Boot PROM code |
| 1.3.6.1.4.1.4253.1.3.2 | ScalarccROMSize | not-accessible | mandatory | Total Size of the CC ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.3.3 | ScalarccNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.3.4 | TableccSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.3.4.1 | RowccSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.3.4.1.1 | ColumnccSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.3.4.1.2 | ColumnccSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.3.4.1.3 | ColumnccSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.3.4.1.4 | ColumnccSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.3.5 | ScalarccNumber | read-only | mandatory | Number of CC rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.3.6 | TableccTable | not-accessible | mandatory | This table represents the information for each channel card |
| 1.3.6.1.4.1.4253.1.3.6.1 | RowccEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.3.6.1.1 | ColumnccCardLocation | read-only | mandatory | Location of the card. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.1.3.6.1.2 | ColumnccCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2 |
| 1.3.6.1.4.1.4253.1.3.6.1.3 | ColumnccCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.3.6.1.4 | ColumnccMfgDate | read-only | mandatory | Date and Time of calibration of the CC card |
| 1.3.6.1.4.1.4253.1.3.6.1.5 | ColumnccSerialNum | read-only | mandatory | Serial # of the CC card. |
| 1.3.6.1.4.1.4253.1.3.6.1.6 | ColumnccModelType | read-only | mandatory | Model type of the channel card. |
| 1.3.6.1.4.1.4253.1.3.6.1.7 | ColumnccName | read-write | mandatory | User configurable name of the channel card |
| 1.3.6.1.4.1.4253.1.3.6.1.8 | ColumnccFWVersionID | read-only | mandatory | The current version string of the CC FW code |
| 1.3.6.1.4.1.4253.1.3.6.1.9 | ColumnccMfgBiasCurrent | read-only | mandatory | Bias current for the optical laser. This is the preset manufacturing value |
| 1.3.6.1.4.1.4253.1.3.6.1.10 | ColumnccMfgModulation | read-only | mandatory | The frequency modulation for the optical laser. This value is the preset manufacturing value. |
| 1.3.6.1.4.1.4253.1.3.6.1.11 | ColumnccMfgApc | read-only | mandatory | The APC value. This value is the preset manufacturing value |
| 1.3.6.1.4.1.4253.1.3.6.1.12 | ColumnccMfgIwmModulation | read-only | mandatory | The frequency modulation for the IWM channel. This value is the preset manufacturing value |
| 1.3.6.1.4.1.4253.1.3.6.1.13 | ColumnccMfgRefClock | not-accessible | mandatory | The value of the reference clock in decimal notation. For a given value, like 1660-EN, the actual value is 16.60-EN. In otherwords, assume a two digit decimal … |
| 1.3.6.1.4.1.4253.1.3.6.1.14 | ColumnccMfgClockDiv | not-accessible | mandatory | The clock divisor. Values are 1250, 622 or 155 in the appropriate clock frequency scale. |
| 1.3.6.1.4.1.4253.1.3.6.1.15 | ColumnccBandwidth | read-write | mandatory | The bandwidth of the channel card. |
| 1.3.6.1.4.1.4253.1.3.6.1.16 | ColumnccSetState | read-write | mandatory | Instruct the CC to do a warmboot or loopback. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.3.6.1.17 | ColumnconnMuxChassis | not-accessible | mandatory | The connected mux chassis. |
| 1.3.6.1.4.1.4253.1.3.6.1.18 | ColumnconnMuxShelf | read-only | mandatory | The connected mux shelf. |
| 1.3.6.1.4.1.4253.1.3.6.1.19 | ColumnconnMuxSlot | read-only | mandatory | The connected mux slot. |
| 1.3.6.1.4.1.4253.1.3.6.1.20 | ColumnconnMuxPort | read-only | mandatory | The connected mux port. |
| 1.3.6.1.4.1.4253.1.3.6.1.21 | ColumnconnDemuxChassis | not-accessible | mandatory | The connected demux chassis. |
| 1.3.6.1.4.1.4253.1.3.6.1.22 | ColumnconnDemuxShelf | read-only | mandatory | The connected demux shelf. |
| 1.3.6.1.4.1.4253.1.3.6.1.23 | ColumnconnDemuxSlot | read-only | mandatory | The connected demux slot. |
| 1.3.6.1.4.1.4253.1.3.6.1.24 | ColumnconnDemuxPort | read-only | mandatory | The connected demux port. |
| 1.3.6.1.4.1.4253.1.3.6.1.25 | ColumnccModelNum | read-only | mandatory | Model number of the CC card. Up to 15 characters |
| 1.3.6.1.4.1.4253.1.3.6.1.26 | ColumnccLinkITUNum | read-only | mandatory | Link ITU number of the CC card. Up to 15 characters |
| 1.3.6.1.4.1.4253.1.3.6.1.27 | ColumnccLinkWavelength | read-only | mandatory | Link Wavelength of the CC card |
| 1.3.6.1.4.1.4253.1.3.6.1.28 | ColumnccLaserType | read-only | mandatory | Laser Type of the Channel Card. |
| 1.3.6.1.4.1.4253.1.3.6.1.29 | ColumnccRecvDiode | read-only | mandatory | Receive Diode of the Channel Card. |
| 1.3.6.1.4.1.4253.1.3.6.1.30 | ColumnccLinkAutoDisable | read-write | mandatory | Flag to enable/disable the CPE link when the threshold value crosses the lower hysteresis limit. The default value is disable. CPE disable with CPE Rx pass thr… |
| 1.3.6.1.4.1.4253.1.3.6.1.31 | ColumnccLinkName | read-write | mandatory | Link name for fiber between the local and the remote cc card. |
| 1.3.6.1.4.1.4253.1.3.6.1.32 | ColumnccCsimModule | read-only | mandatory | Whether colorSIM module is physically present, not installed or preconfigured. |
| 1.3.6.1.4.1.4253.1.3.6.1.33 | ColumnccHWName | read-only | mandatory | Display Hardware name of the CC Card. |
| 1.3.6.1.4.1.4253.1.3.6.1.34 | ColumnccBackpackModule | read-only | mandatory | Presence of Backpack module, installed or not Installed. |
| 1.3.6.1.4.1.4253.1.3.6.1.35 | ColumnccBackpackRxITUNumber | read-only | mandatory | Rx ITU number of backpack. |
| 1.3.6.1.4.1.4253.1.3.6.1.36 | ColumnccBackpackTxITUNumber | read-only | mandatory | Tx ITU number of backpack. |
| 1.3.6.1.4.1.4253.1.3.6.1.37 | ColumnccBackpackRxInsertionLoss | read-only | mandatory | Rx Insertion loss of backpack. |
| 1.3.6.1.4.1.4253.1.3.6.1.38 | ColumnccBackpackTxInsertionLoss | read-only | mandatory | Tx Insertion loss of backpack. |
| 1.3.6.1.4.1.4253.1.3.6.1.39 | ColumnccBackpackRxExpressLoss | read-only | mandatory | Rx Express loss of backpack. |
| 1.3.6.1.4.1.4253.1.3.6.1.40 | ColumnccBackpackTxExpressLoss | read-only | mandatory | Tx Express loss of backpack. |
| 1.3.6.1.4.1.4253.1.3.6.1.41 | ColumnccSwitchByShelfSlot | read-write | mandatory | Initiate manual UPSR switching by shelf and slot. |
| 1.3.6.1.4.1.4253.1.3.6.1.42 | ColumnccPathID | read-write | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.3.6.1.43 | ColumnccCpeDisableThreshold | read-write | mandatory | CPE Disable Threshold (Link Rx Power) in dBm. The limit is from -32 to -8, but input should be an absolute value if using mib browser. A value of 0 in this fie… |
| 1.3.6.1.4.1.4253.1.3.6.1.44 | ColumnccCpeReEnableThreshold | read-write | mandatory | CPE Re-enable threshold (Link Rx Power) in dBm. The limit is from -31 to -7, but input should be an absolute value if using mib browser. A value of 0 in this f… |
| 1.3.6.1.4.1.4253.1.3.6.1.45 | ColumnconnTxNonMuxDmuxCardType | read-only | mandatory | Type of module connected to Tx port of OCM. |
| 1.3.6.1.4.1.4253.1.3.6.1.46 | ColumnconnTxNonMuxDmuxPort | read-only | mandatory | Conn port for CC's Tx port.Possible values based on card types that can connect to OCM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx,… |
| 1.3.6.1.4.1.4253.1.3.6.1.47 | ColumnconnTxNonMuxDmuxShelf | read-only | mandatory | The shelf the card conn to Tx port of OCM. Valid values are: 1 to 10. |
| 1.3.6.1.4.1.4253.1.3.6.1.48 | ColumnconnTxNonMuxDmuxSlot | read-only | mandatory | The slot within the shelf the card conn to Tx port of OCM. |
| 1.3.6.1.4.1.4253.1.3.6.1.49 | ColumnconnRxNonMuxDmuxCardType | read-only | mandatory | Type of module connected to Rx port of OCM. |
| 1.3.6.1.4.1.4253.1.3.6.1.50 | ColumnconnRxNonMuxDmuxPort | read-only | mandatory | Conn port for CC's Rx port.Possible values based on card types that can connect to OCM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx,… |
| 1.3.6.1.4.1.4253.1.3.6.1.51 | ColumnconnRxNonMuxDmuxShelf | read-only | mandatory | The shelf the card conn to Rx port of OCM. Valid values are: 1 to 10. |
| 1.3.6.1.4.1.4253.1.3.6.1.52 | ColumnconnRxNonMuxDmuxSlot | read-only | mandatory | The slot within the shelf the card conn to Rx port of OCM. |
| 1.3.6.1.4.1.4253.1.3.6.1.53 | ColumnccUpsrMode | read-write | mandatory | UPSR mode for CC card: primary or backup. If not in upsr configuration, value is na. This value will not take affect until ccLinkAutoDisable has been enabled. |
| 1.3.6.1.4.1.4253.1.3.6.1.54 | ColumnccPairShelf | read-write | mandatory | The shelf of other CC card in pair. |
| 1.3.6.1.4.1.4253.1.3.6.1.55 | ColumnccPairSlot | read-write | mandatory | The slot of other CC card in pair. Input 0 to unpair OCMs and delete RSM connections if any. |
| 1.3.6.1.4.1.4253.1.3.6.1.56 | ColumnccAdminState | read-write | mandatory | Administrative control over that cc card. Default value is enable. When disabled, no alarms/events gets generated. For remote CC, the default value is disabled |
| 1.3.6.1.4.1.4253.1.3.6.1.57 | ColumnccRegenPairShelf | read-write | mandatory | The shelf of other CC card in OCM regeneration pair. This value will not take affect until ccLinkAutoDisable has been enabled. |
| 1.3.6.1.4.1.4253.1.3.6.1.58 | ColumnccRegenPairSlot | read-write | mandatory | The slot of other CC card in OCM regeneration pair. Input 0 to unpair OCMs involved. This value will not take affect until ccLinkAutoDisable has been enabled. |
| 1.3.6.1.4.1.4253.1.3.6.1.59 | ColumnccCleiNum | read-only | mandatory | CLEI number of the CC Card. |
| 1.3.6.1.4.1.4253.1.3.6.1.60 | ColumnconnCpeTxMcmescShelf | read-only | mandatory | The connected MCMESC shelf. |
| 1.3.6.1.4.1.4253.1.3.6.1.61 | ColumnconnCpeTxMcmescSlot | read-only | mandatory | The connected MCMESC slot. |
| 1.3.6.1.4.1.4253.1.3.6.1.62 | ColumnconnCpeTxMcmescPort | read-only | mandatory | The connected MCMESC port. 1=Link Tx, 2=Link Rx. |
| 1.3.6.1.4.1.4253.1.3.6.1.63 | ColumnconnCpeRxMcmescShelf | read-only | mandatory | The connected MCMESC shelf. |
| 1.3.6.1.4.1.4253.1.3.6.1.64 | ColumnconnCpeRxMcmescSlot | read-only | mandatory | The connected MCMESC slot. |
| 1.3.6.1.4.1.4253.1.3.6.1.65 | ColumnconnCpeRxMcmescPort | read-only | mandatory | The connected MCMESC port. 1=Link Tx, 2=Link Rx. |
| 1.3.6.1.4.1.4253.1.3.6.1.66 | ColumnccNumPorts | read-only | mandatory | Total port numbers on each CC card. |
| 1.3.6.1.4.1.4253.1.4 | Nodemux | |||
| 1.3.6.1.4.1.4253.1.4.1 | ScalarmuxBootPromVer | not-accessible | mandatory | The current version string of the Mux Boot PROM code |
| 1.3.6.1.4.1.4253.1.4.2 | ScalarmuxROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.4.3 | ScalarmuxNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.4.4 | TablemuxSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.4.4.1 | RowmuxSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.4.4.1.1 | ColumnmuxSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.4.4.1.2 | ColumnmuxSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.4.4.1.3 | ColumnmuxSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.4.4.1.4 | ColumnmuxSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.4.5 | ScalarmuxNumber | read-only | mandatory | Number of MUX rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.4.6 | TablemuxTable | not-accessible | mandatory | This table represents the information for each MUX card |
| 1.3.6.1.4.1.4253.1.4.6.1 | RowmuxEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.4.6.1.1 | ColumnmuxCardLocation | read-only | mandatory | Location of the module. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.1.4.6.1.2 | ColumnmuxCardShelf | read-only | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.1.4.6.1.3 | ColumnmuxCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.4.6.1.4 | ColumnmuxModelNum | read-only | mandatory | Model number for module. |
| 1.3.6.1.4.1.4253.1.4.6.1.5 | ColumnmuxMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.4.6.1.6 | ColumnmuxSerialNum | read-only | mandatory | Serial # of the module. |
| 1.3.6.1.4.1.4253.1.4.6.1.7 | ColumnmuxModelType | read-only | mandatory | Model type of the module |
| 1.3.6.1.4.1.4253.1.4.6.1.8 | ColumnmuxName | read-write | mandatory | User configurable name of the module |
| 1.3.6.1.4.1.4253.1.4.6.1.9 | ColumnmuxFWVersionID | read-only | mandatory | The current version string of the FW code |
| 1.3.6.1.4.1.4253.1.4.6.1.10 | ColumnmuxSetState | read-write | mandatory | Instruct the mux to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.4.6.1.11 | ColumnmuxNumPorts | read-only | mandatory | Total port numbers on each MUX card. Should be six |
| 1.3.6.1.4.1.4253.1.4.6.1.12 | ColumnmuxUpgradeFlag | read-only | mandatory | The MUX card's status is upgradable or not. |
| 1.3.6.1.4.1.4253.1.4.6.1.13 | ColumnmuxHWName | read-only | mandatory | Display Hardware name of the mux/dmux Card. |
| 1.3.6.1.4.1.4253.1.4.6.1.14 | ColumnmuxPathID | read-write | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.4.6.1.15 | ColumnmuxAdminState | read-write | mandatory | Administrative control over that mux card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.4.6.1.16 | ColumnmuxCleiNum | read-only | mandatory | CLEI number of the mux/dmux Card. |
| 1.3.6.1.4.1.4253.1.4.6.1.17 | ColumnmuxChannelSpacing | read-only | mandatory | ITU channel spacing for the mux/demux card. Only valid for MD100-40 and BD4 Modules. |
| 1.3.6.1.4.1.4253.1.4.6.1.18 | ColumnmuxStartItu | read-only | mandatory | First ITU channel supported by the module. Only valid for MD100-40 and BD4 Modules. |
| 1.3.6.1.4.1.4253.1.4.6.1.19 | ColumnmuxEndItu | read-only | mandatory | Last ITU channel supported by the module. Only valid for MD100-40 and BD4 Modules. |
| 1.3.6.1.4.1.4253.1.4.6.1.20 | ColumnmuxChannelsPerBand | read-only | mandatory | Number of channels per optical band supported by the module. Only valid for BD-4 and MD100-40 module. |
| 1.3.6.1.4.1.4253.1.4.6.1.21 | ColumnmuxBands | read-only | mandatory | Number of bands supported by the module. Only valid for BD-4 and MD100-40 module. |
| 1.3.6.1.4.1.4253.1.4.7 | ScalarmuxPortNumber | read-only | mandatory | Number of MUX's port rows in the following table. This number is automatically updated whenever a new row is added to the table below.Basically a product of # … |
| 1.3.6.1.4.1.4253.1.4.8 | TablemuxPortTable | not-accessible | mandatory | This table represents the information for each MUX card's port. |
| 1.3.6.1.4.1.4253.1.4.8.1 | RowmuxPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.4.8.1.1 | ColumnmuxPortCardLocation | read-only | mandatory | Location of the MUX's port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.1.4.8.1.2 | ColumnmuxPortCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.4.8.1.3 | ColumnmuxPortCardSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.4.8.1.4 | ColumnmuxPortIndex | read-only | mandatory | Port's index. Ports 1 through 4 can be use for connection with OCM family or MCMT1/MCME1 only. |
| 1.3.6.1.4.1.4253.1.4.8.1.5 | ColumnmuxWavelength | read-only | mandatory | Port's wavelength: either ITU number or actual wavelength in nm. Supported by all Mux modules except MD100-40 & BD4. |
| 1.3.6.1.4.1.4253.1.4.8.1.6 | ColumnmuxInsertLoss | read-only | mandatory | Mux Port insertion Loss range. Supported by all Mux modules except MD100-40 & BD4. |
| 1.3.6.1.4.1.4253.1.4.8.1.7 | ColumnmuxConnCardType | read-write | mandatory | Module type connected to mux port. Supported by all Mux modules except MD100-40 & BD4. |
| 1.3.6.1.4.1.4253.1.4.8.1.8 | ColumnmuxConnLocation | read-write | mandatory | The chassis's location of the card conn to. Supported by all Mux modules except MD100-40 & BD4. |
| 1.3.6.1.4.1.4253.1.4.8.1.9 | ColumnmuxConnShelf | read-write | mandatory | The shelf the card conn to. Valid values are: 1 to 2. Supported by all Mux modules except MD100-40 & BD4. |
| 1.3.6.1.4.1.4253.1.4.8.1.10 | ColumnmuxConnSlot | read-write | mandatory | The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. Supported by all Mux modules excep… |
| 1.3.6.1.4.1.4253.1.4.8.1.11 | ColumnmuxConnPort | read-write | mandatory | Conn port for MUX/DMUX's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn … |
| 1.3.6.1.4.1.4253.1.4.8.1.12 | ColumnmuxPortType | read-only | mandatory | Type of the MUX's port. Supported by all Mux modules except MD100-40 & BD4. |
| 1.3.6.1.4.1.4253.1.4.8.1.13 | ColumnmuxConnChassisID | read-write | mandatory | Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the l… |
| 1.3.6.1.4.1.4253.1.4.8.1.14 | ColumnmuxConnSystemName | read-write | mandatory | System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of th… |
| 1.3.6.1.4.1.4253.1.4.8.1.15 | ColumnmuxConnIpAddress | read-write | mandatory | IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the no… |
| 1.3.6.1.4.1.4253.1.4.8.1.16 | ColumnmuxPortAvgInsertionLoss | read-only | mandatory | Average port insertion loss for the port category. Valid only for MD100-40 & BD4 modules. |
| 1.3.6.1.4.1.4253.1.4.8.1.17 | ColumnmuxPortMaxInsertionLoss | read-only | mandatory | Maximum port insertion loss for the port category. Valid only for MD100-40 & BD4 modules. |
| 1.3.6.1.4.1.4253.1.4.8.1.18 | ColumnmuxPortTapRatio | read-only | mandatory | Tap ratio for the port category. Valid only for MD100-40 & BD4 modules. |
| 1.3.6.1.4.1.4253.1.5 | Nodeps | |||
| 1.3.6.1.4.1.4253.1.5.1 | ScalarpsNumber | read-only | mandatory | Number of PS (power supply) rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.5.2 | TablepsTable | not-accessible | mandatory | This table represents the information for each PS module. |
| 1.3.6.1.4.1.4253.1.5.2.1 | RowpsEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.5.2.1.1 | ColumnpsID | not-accessible | mandatory | The module ID the ps module is in. Valid values are: 1 to 4 |
| 1.3.6.1.4.1.4253.1.5.2.1.2 | ColumnpsMode | not-accessible | mandatory | Mode of the PS module. Valid values are: active or standby |
| 1.3.6.1.4.1.4253.1.5.2.1.3 | ColumnpsMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the PS module. |
| 1.3.6.1.4.1.4253.1.5.2.1.4 | ColumnpsSerialNum | not-accessible | mandatory | Serial # of the PS module. Not Supported Yet. |
| 1.3.6.1.4.1.4253.1.5.2.1.5 | ColumnpsModelType | not-accessible | mandatory | Model type of the PS module. Up to 10 characters. Not Supported Yet. |
| 1.3.6.1.4.1.4253.1.6 | Nodedownload | |||
| 1.3.6.1.4.1.4253.1.6.1 | TabledlFtpTable | not-accessible | mandatory | This table represents the information for each FTP server |
| 1.3.6.1.4.1.4253.1.6.1.1 | RowdlFtpEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.6.1.1.1 | ColumndlFtpIp | read-write | mandatory | The IP address of the FTP server. |
| 1.3.6.1.4.1.4253.1.6.1.1.2 | ColumndlFtpLogonID | read-write | mandatory | The FTP user ID for this FTP server. Up to 15 chars. |
| 1.3.6.1.4.1.4253.1.6.1.1.3 | ColumndlFtpPasswd | read-write | mandatory | Password for the above FTP Logon ID. This password is NOT hashed. Proper security access is required to set and view this element. Most FTP connections, howeve… |
| 1.3.6.1.4.1.4253.1.6.1.1.4 | ColumndlFtpMode | read-write | mandatory | FTP server modes. The choices are: active or passive, active may be necessary for users behind a firewall. |
| 1.3.6.1.4.1.4253.1.6.1.1.5 | ColumndlFtpPort | read-write | mandatory | FTP port. This port is used in conjunction with the FTP IP address for establishing a connection to the FTP server. Any valid IP port may be entered. Setting t… |
| 1.3.6.1.4.1.4253.1.6.2 | TabledlPreQualTable | not-accessible | mandatory | This table represents the information for each PreQual table. |
| 1.3.6.1.4.1.4253.1.6.2.1 | RowdlPreQualEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.6.2.1.1 | ColumndlPreQualTypeVersion | read-write | mandatory | The Image type and version to be prequalified before downloading. The string format is : type,version. The prequal action will be taken after setting version. |
| 1.3.6.1.4.1.4253.1.6.2.1.2 | ColumndlPreQualResult | read-only | mandatory | The result after comparing type and version of the selected download image with the compatibility matrix. The result is either compatible, incompatible or unkn… |
| 1.3.6.1.4.1.4253.1.6.3 | TabledlDownloadTable | not-accessible | mandatory | This table represents the information for download and activation. |
| 1.3.6.1.4.1.4253.1.6.3.1 | RowdlDownloadEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.6.3.1.1 | ColumndlType | read-write | mandatory | The Image type to be downloaded or to be activated. The valid values are: all, mpms, boot, macf, mcme1, mcmesc_code, mcmt1, mpm, ocm, ocm10g, oet, osam, osam_h… |
| 1.3.6.1.4.1.4253.1.6.3.1.2 | ColumndlLocation | read-write | mandatory | The location to be downloaded or to be activated. The choices are: local, remote or both. (Only local and remote are supported at this time, LuxnOS has only lo… |
| 1.3.6.1.4.1.4253.1.6.3.1.3 | ColumndlShelf | read-write | mandatory | The destination shelf. When dlType is set to all, dlShelf should be set to 0. |
| 1.3.6.1.4.1.4253.1.6.3.1.4 | ColumndlSlot | read-write | mandatory | The slot within the selected shelf. When dlType is set to all, dlSlot should be set to 0. |
| 1.3.6.1.4.1.4253.1.6.3.1.5 | ColumndlFilename | read-write | mandatory | The filename and path of the file to be downloaded -up to 255 characters. When dlType is set to all, the dlFilename field should be set to the path of the dire… |
| 1.3.6.1.4.1.4253.1.6.3.1.6 | ColumndlActivate | read-write | mandatory | Activate the backup image at the selected location. To MCMESC, no, activateBackupFirmware, activateBackupFPGA and activateBackupFirmwareAndFPGA are applicable.… |
| 1.3.6.1.4.1.4253.1.6.3.1.7 | ColumndlExportType | read-write | mandatory | The image indicated by dlType is to be exported to the dlFilename using FTP. Ths element is reset to none(1) after each export. |
| 1.3.6.1.4.1.4253.1.6.4 | TabledlOSTable | not-accessible | mandatory | This table represents the information for LuxnOS table. |
| 1.3.6.1.4.1.4253.1.6.4.1 | RowdlOSEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.6.4.1.1 | ColumndlOSIndex | not-accessible | mandatory | The Integer ID for each LuxnOS. |
| 1.3.6.1.4.1.4253.1.6.4.1.2 | ColumndlOSVersion | not-accessible | mandatory | Display the LuxnOS version. |
| 1.3.6.1.4.1.4253.1.6.4.1.3 | ColumndlOSState | not-accessible | mandatory | Display the LuxnOS state: operating(1) is the current operating LuxnOS, backup(2)is the backup LuxnOS. |
| 1.3.6.1.4.1.4253.1.6.4.1.4 | ColumndlOSRelDate | not-accessible | mandatory | Display the release date of the LuxnOS. |
| 1.3.6.1.4.1.4253.1.6.5 | ScalardlUpdateOS | not-accessible | mandatory | Display and select Update LuxnOS Mode: toggle(1) to toggle between operating and backup LuxnOS, revert(2) to copy LuxnOS from the backup to the operating area.… |
| 1.3.6.1.4.1.4253.1.7 | Nodefadm | |||
| 1.3.6.1.4.1.4253.1.7.1 | ScalarfadmBootPromVer | not-accessible | mandatory | The current version string of the OADM Boot PROM code |
| 1.3.6.1.4.1.4253.1.7.2 | ScalarfadmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.7.3 | ScalarfadmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.7.4 | TablefadmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.7.4.1 | RowfadmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.7.4.1.1 | ColumnfadmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.7.4.1.2 | ColumnfadmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.7.4.1.3 | ColumnfadmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.7.4.1.4 | ColumnfadmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.7.5 | ScalarfadmNumber | read-only | mandatory | Number of FADM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.7.6 | TablefadmTable | not-accessible | mandatory | This table represents the information for each OADM module |
| 1.3.6.1.4.1.4253.1.7.6.1 | RowfadmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.7.6.1.1 | ColumnfadmCardLocation | read-only | mandatory | Location of the FADM Module. |
| 1.3.6.1.4.1.4253.1.7.6.1.2 | ColumnfadmCardShelf | read-only | mandatory | The shelf of the Module is in. Valid values are: 1, 2 or 3 depending on the chassis type. |
| 1.3.6.1.4.1.4253.1.7.6.1.3 | ColumnfadmCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 21 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.7.6.1.4 | ColumnfadmMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the FADM card |
| 1.3.6.1.4.1.4253.1.7.6.1.5 | ColumnfadmSerialNum | read-only | mandatory | Serial # of the FADM card. |
| 1.3.6.1.4.1.4253.1.7.6.1.6 | ColumnfadmModelType | read-only | mandatory | Model type of the FADM |
| 1.3.6.1.4.1.4253.1.7.6.1.7 | ColumnfadmName | read-write | mandatory | Display (Network) name of the FADM Card |
| 1.3.6.1.4.1.4253.1.7.6.1.8 | ColumnfadmFWVersionID | read-only | mandatory | The current version string of the FADM FW code |
| 1.3.6.1.4.1.4253.1.7.6.1.9 | ColumnfadmSetState | read-write | mandatory | Instruct the fadm to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.7.6.1.10 | ColumnfadmNumPorts | read-only | mandatory | Total port numbers of FADM module. |
| 1.3.6.1.4.1.4253.1.7.6.1.11 | ColumnfadmUpgradeFlag | read-only | mandatory | The FADM module's status is upgradeable or not. |
| 1.3.6.1.4.1.4253.1.7.6.1.12 | ColumnfadmModelNum | read-only | mandatory | Model # of the FADM card. Up to 15 characters |
| 1.3.6.1.4.1.4253.1.7.6.1.13 | ColumnfadmITUNumber1 | read-only | mandatory | Port 1's ITU wavelength. |
| 1.3.6.1.4.1.4253.1.7.6.1.14 | ColumnfadmITUNumber2 | read-only | mandatory | |
| 1.3.6.1.4.1.4253.1.7.6.1.15 | ColumnfadmInsertionLoss1 | read-only | mandatory | Port 1's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.7.6.1.16 | ColumnfadmInsertionLoss2 | not-accessible | mandatory | |
| 1.3.6.1.4.1.4253.1.7.6.1.17 | ColumnfadmExpressLoss | read-only | mandatory | Internal express port's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.7.6.1.18 | ColumnfadmHWName | read-only | mandatory | Display Hardware name of the FADM Card. |
| 1.3.6.1.4.1.4253.1.7.6.1.19 | ColumnfadmPathID | read-write | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.7.6.1.20 | ColumnfadmAdminState | read-write | mandatory | Administrative control over that fadm card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.7.6.1.21 | ColumnfadmCleiNum | read-only | mandatory | CLEI number of the fadm Card. |
| 1.3.6.1.4.1.4253.1.7.6.1.22 | ColumnfadmBand | read-only | mandatory | Optical band supported by the module. Valid only for BP-5 and BP-10 modules. |
| 1.3.6.1.4.1.4253.1.7.6.1.23 | ColumnfadmChannelsPerBand | read-only | mandatory | Number of channels per optical band supported by the module. Only valid for BP-5 and BP-10module. |
| 1.3.6.1.4.1.4253.1.7.6.1.24 | ColumnfadmStartItu | read-only | mandatory | First ITU channel supported by the module. Valid only for BP-5 and BP-10 modules. |
| 1.3.6.1.4.1.4253.1.7.6.1.25 | ColumnfadmEndItu | read-only | mandatory | Last ITU channel supported by the module. Valid only for BP-5 and BP-10 modules. |
| 1.3.6.1.4.1.4253.1.7.7 | TablefadmPortTable | not-accessible | mandatory | This table represents the physical connection for each FADM card's port. |
| 1.3.6.1.4.1.4253.1.7.7.1 | RowfadmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.7.7.1.1 | ColumnfadmPortCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.7.7.1.2 | ColumnfadmPortCardSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.7.7.1.3 | ColumnfadmPortType | read-only | mandatory | Type of the FADM port. The order is CLI compatible. For FADM model type, the ports are listed on the left column |
| 1.3.6.1.4.1.4253.1.7.7.1.4 | ColumnfadmConnLocation | read-write | mandatory | The chassis's location of the card conn to. |
| 1.3.6.1.4.1.4253.1.7.7.1.5 | ColumnfadmConnIpAddress | read-write | mandatory | IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the no… |
| 1.3.6.1.4.1.4253.1.7.7.1.6 | ColumnfadmConnChassisID | read-write | mandatory | Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the l… |
| 1.3.6.1.4.1.4253.1.7.7.1.7 | ColumnfadmConnSystemName | read-write | mandatory | System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of th… |
| 1.3.6.1.4.1.4253.1.7.7.1.8 | ColumnfadmConnCardType | read-write | mandatory | Module type connected to fadm port. |
| 1.3.6.1.4.1.4253.1.7.7.1.9 | ColumnfadmConnPort | read-write | mandatory | Conn port for FADM's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx… |
| 1.3.6.1.4.1.4253.1.7.7.1.10 | ColumnfadmConnShelf | read-write | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.7.7.1.11 | ColumnfadmConnSlot | read-write | mandatory | The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. |
| 1.3.6.1.4.1.4253.1.8 | Nodeoppm | |||
| 1.3.6.1.4.1.4253.1.8.1 | ScalaroppmBootPromVer | not-accessible | mandatory | The current version string of the oppm Boot PROM code |
| 1.3.6.1.4.1.4253.1.8.2 | ScalaroppmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.8.3 | ScalaroppmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.8.4 | TableoppmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.8.4.1 | RowoppmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.8.4.1.1 | ColumnoppmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.8.4.1.2 | ColumnoppmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.8.4.1.3 | ColumnoppmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.8.4.1.4 | ColumnoppmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.8.5 | ScalaroppmNumber | not-accessible | mandatory | Number of OPPM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.8.6 | TableoppmTable | not-accessible | mandatory | This table represents the information for each OPPM card |
| 1.3.6.1.4.1.4253.1.8.6.1 | RowoppmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.8.6.1.1 | ColumnoppmCardLocation | not-accessible | mandatory | Location of the OPPM card. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.1.8.6.1.2 | ColumnoppmCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 2 |
| 1.3.6.1.4.1.4253.1.8.6.1.3 | ColumnoppmCardSlot | not-accessible | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.8.6.1.4 | ColumnoppmModelNum | not-accessible | mandatory | Oppm's model number. |
| 1.3.6.1.4.1.4253.1.8.6.1.5 | ColumnoppmMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the OPPM card |
| 1.3.6.1.4.1.4253.1.8.6.1.6 | ColumnoppmSerialNum | not-accessible | mandatory | Serial # of the OPPM card. |
| 1.3.6.1.4.1.4253.1.8.6.1.7 | ColumnoppmModelType | not-accessible | mandatory | Model type of the OPPM |
| 1.3.6.1.4.1.4253.1.8.6.1.8 | ColumnoppmName | not-accessible | mandatory | Display (Network) name of the OPPM Card |
| 1.3.6.1.4.1.4253.1.8.6.1.9 | ColumnoppmFWVersionID | not-accessible | mandatory | The current version string of the OPPM FW code |
| 1.3.6.1.4.1.4253.1.8.6.1.10 | ColumnoppmSetState | not-accessible | mandatory | Instruct the oppm to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.8.6.1.12 | ColumnoppmTxInsertLoss | not-accessible | mandatory | Transmit insertion loss. |
| 1.3.6.1.4.1.4253.1.8.6.1.13 | ColumnoppmRxInsertLoss | not-accessible | mandatory | Receive insertion loss. |
| 1.3.6.1.4.1.4253.1.8.6.1.14 | ColumnoppmUpgradeFlag | not-accessible | mandatory | The oppm card's status is upgradable or not. |
| 1.3.6.1.4.1.4253.1.8.6.1.15 | ColumnoppmSwitch | not-accessible | mandatory | instruct the OPPM to take on an action, such as: switch to link A or link B A get would alway return other(1). |
| 1.3.6.1.4.1.4253.1.8.6.1.16 | ColumnoppmMarginForSwitch | not-accessible | mandatory | Configurable switching margin in dB for protection switch to occur. |
| 1.3.6.1.4.1.4253.1.8.6.1.17 | ColumnoppmHighAlarmMargin | not-accessible | mandatory | High alarm margin for input signal strength displayed in dB unit |
| 1.3.6.1.4.1.4253.1.8.6.1.18 | ColumnoppmConfigCommit | not-accessible | mandatory | This allows the current module configuration, such as oppmMarginForSwitch, to be stored in permanent storage. |
| 1.3.6.1.4.1.4253.1.8.6.1.19 | ColumnoppmHWName | not-accessible | mandatory | Display Hardware name of the OPPM Card. |
| 1.3.6.1.4.1.4253.1.8.6.1.20 | ColumnoppmLinkAPathID | not-accessible | mandatory | Oppmm LinkA Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card… |
| 1.3.6.1.4.1.4253.1.8.6.1.21 | ColumnoppmLinkBPathID | not-accessible | mandatory | Oppm LinkB Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card … |
| 1.3.6.1.4.1.4253.1.8.6.1.22 | ColumnoppmAdminState | not-accessible | mandatory | Administrative control over that oppm card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.8.6.1.23 | ColumnoppmCleiNum | not-accessible | mandatory | CLEI number of the oppm Card. |
| 1.3.6.1.4.1.4253.1.8.6.1.24 | ColumnoppmSwitchState | not-accessible | mandatory | The switching state. Switching state may be either auto or forced. The auto state means automatic switching is enabled. Forced state means swithcing is disable… |
| 1.3.6.1.4.1.4253.1.8.7 | TableoppmPortTable | not-accessible | mandatory | This table represents the physical connection for each OPPM card's port. |
| 1.3.6.1.4.1.4253.1.8.7.1 | RowoppmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.8.7.1.1 | ColumnoppmPortCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.8.7.1.2 | ColumnoppmPortCardSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.8.7.1.3 | ColumnoppmPortType | read-write | mandatory | Type of the OPPM's port. |
| 1.3.6.1.4.1.4253.1.8.7.1.4 | ColumnoppmConnLocation | not-accessible | mandatory | The chassis's location of the card conn to. |
| 1.3.6.1.4.1.4253.1.8.7.1.5 | ColumnoppmConnIpAddress | not-accessible | mandatory | IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the no… |
| 1.3.6.1.4.1.4253.1.8.7.1.6 | ColumnoppmConnChassisID | not-accessible | mandatory | Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the l… |
| 1.3.6.1.4.1.4253.1.8.7.1.7 | ColumnoppmConnSystemName | not-accessible | mandatory | System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of th… |
| 1.3.6.1.4.1.4253.1.8.7.1.8 | ColumnoppmConnCardType | not-accessible | mandatory | Module type connected to oppm port. |
| 1.3.6.1.4.1.4253.1.8.7.1.9 | ColumnoppmConnPort | not-accessible | mandatory | Conn port for OPPM's port. Possible values based on card types that can connect to OPPM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx… |
| 1.3.6.1.4.1.4253.1.8.7.1.10 | ColumnoppmConnShelf | not-accessible | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.8.7.1.11 | ColumnoppmConnSlot | not-accessible | mandatory | The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. |
| 1.3.6.1.4.1.4253.1.9 | Nodemcm | |||
| 1.3.6.1.4.1.4253.1.9.1 | ScalarmcmBootPromVer | not-accessible | mandatory | The current version string of the mcmt1/mcme1 Boot PROM code |
| 1.3.6.1.4.1.4253.1.9.2 | ScalarmcmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.9.3 | ScalarmcmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.9.4 | TablemcmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.9.4.1 | RowmcmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.9.4.1.1 | ColumnmcmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.9.4.1.2 | ColumnmcmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.9.4.1.3 | ColumnmcmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.9.4.1.4 | ColumnmcmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.9.5 | ScalarmcmNumber | read-only | mandatory | Number of ADM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.9.6 | TablemcmTable | not-accessible | mandatory | This table represents the information for each mcmt1/mcme1 module |
| 1.3.6.1.4.1.4253.1.9.6.1 | RowmcmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.9.6.1.1 | ColumnmcmCardLocation | read-only | mandatory | Location of the mcmt1/mcme1 Module. |
| 1.3.6.1.4.1.4253.1.9.6.1.2 | ColumnmcmCardShelf | read-only | mandatory | The shelf of the mcmt1/mcme1 is in. Valid values are: 1..2 |
| 1.3.6.1.4.1.4253.1.9.6.1.3 | ColumnmcmCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 21 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.9.6.1.4 | ColumnmcmMfgDate | read-only | mandatory | Date and Time of calibration of the mcmt1/mcme1 card |
| 1.3.6.1.4.1.4253.1.9.6.1.5 | ColumnmcmSerialNum | read-only | mandatory | Serial # of the mcmt1/mcme1 card. |
| 1.3.6.1.4.1.4253.1.9.6.1.6 | ColumnmcmModelType | read-only | mandatory | Model type of the mcmt1/mcme1 |
| 1.3.6.1.4.1.4253.1.9.6.1.7 | ColumnmcmName | read-write | mandatory | Display (Network) name of the MCMT1/MCME1 Module |
| 1.3.6.1.4.1.4253.1.9.6.1.8 | ColumnmcmFWVersionID | read-only | mandatory | The current version string of the MCMT1/MCME1 FW code |
| 1.3.6.1.4.1.4253.1.9.6.1.9 | ColumnmcmAdminState | read-write | mandatory | Administrative control over that mcmt1/mcme1 card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.9.6.1.10 | ColumnmcmLaserTemperature | not-accessible | mandatory | Temperature of the Laser. Not yet supported |
| 1.3.6.1.4.1.4253.1.9.6.1.11 | ColumnmcmBandwidth | not-accessible | mandatory | mcmt1/mcme1 module's line rate. |
| 1.3.6.1.4.1.4253.1.9.6.1.12 | ColumnmcmSetState | read-write | mandatory | Instruct the mcmt1/mcme1 card to do either a reset or loopback. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.9.6.1.13 | ColumnmcmNumPorts | read-only | mandatory | Total port numbers of MCMT1/MCME1 module. |
| 1.3.6.1.4.1.4253.1.9.6.1.14 | ColumnmcmUpgradeFlag | read-only | mandatory | The MCMT1/MCME1 module's status is upgradable or not. |
| 1.3.6.1.4.1.4253.1.9.6.1.15 | ColumnmcmEthernetStatus | read-write | mandatory | The MCMT1/MCME1 module's Ethernet status is down or up. |
| 1.3.6.1.4.1.4253.1.9.6.1.16 | ColumnmcmTimingPort | read-only | mandatory | The MCMT1/MCME1 module's port clock src |
| 1.3.6.1.4.1.4253.1.9.6.1.17 | ColumnmcmModelNum | read-only | mandatory | The mcmt1/mcme1 port's model number |
| 1.3.6.1.4.1.4253.1.9.6.1.18 | ColumnmcmMfgBiasCurrent | read-only | mandatory | Bias current for the optical laser. This is the preset manufacturing value |
| 1.3.6.1.4.1.4253.1.9.6.1.19 | ColumnmcmMfgModulation | read-only | mandatory | The frequency modulation for the optical laser. This value is the preset manufacturing value. |
| 1.3.6.1.4.1.4253.1.9.6.1.20 | ColumnmcmMfgApc | read-only | mandatory | The APC value. This value is the preset manufacturing value |
| 1.3.6.1.4.1.4253.1.9.6.1.21 | ColumnmcmMfgIwmModulation | read-only | mandatory | The frequency modulation for the IWM channel. This value is the preset manufacturing value |
| 1.3.6.1.4.1.4253.1.9.6.1.22 | ColumnmcmconnMuxShelf | read-only | mandatory | The connected mux shelf. |
| 1.3.6.1.4.1.4253.1.9.6.1.23 | ColumnmcmconnMuxSlot | read-only | mandatory | The connected mux slot. |
| 1.3.6.1.4.1.4253.1.9.6.1.24 | ColumnmcmconnMuxPort | read-only | mandatory | The connected mux port. |
| 1.3.6.1.4.1.4253.1.9.6.1.25 | ColumnmcmconnDemuxShelf | read-only | mandatory | The connected demux shelf. |
| 1.3.6.1.4.1.4253.1.9.6.1.26 | ColumnmcmconnDemuxSlot | read-only | mandatory | The connected demux slot. |
| 1.3.6.1.4.1.4253.1.9.6.1.27 | ColumnmcmconnDemuxPort | read-only | mandatory | The connected demux port. |
| 1.3.6.1.4.1.4253.1.9.6.1.28 | ColumnmcmTimingPriority | read-write | mandatory | The clock source priority in descending order in the format of a,b,c,d,e,f in which a through f should be replaced with 1 through 6 which has the same meaning … |
| 1.3.6.1.4.1.4253.1.9.6.1.29 | ColumnmcmLinkName | read-write | mandatory | User configurable Link name for the connection between the local and remote MCM/MCME1 Modules |
| 1.3.6.1.4.1.4253.1.9.6.1.30 | ColumnmcmEthernetMode | read-write | mandatory | This allows the ethernet mode configured as auto detect, forced 10M, or forced 100M. |
| 1.3.6.1.4.1.4253.1.9.6.1.31 | ColumnmcmHWName | read-only | mandatory | Display Hardware name of the MCMT1/MCME1 Card. |
| 1.3.6.1.4.1.4253.1.9.6.1.32 | ColumnmcmLinkWaveLength | read-only | mandatory | Link Wavelength of the MCMT1/MCME1 card |
| 1.3.6.1.4.1.4253.1.9.6.1.33 | ColumnmcmFpgaVersionID | read-only | mandatory | The current version string of the MCMT1/MCME1 FPGA. |
| 1.3.6.1.4.1.4253.1.9.6.1.34 | ColumnmcmPathID | read-write | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.9.6.1.35 | ColumnmcmCleiNum | read-only | mandatory | CLEI number of the mcmt1/mcme1 Card. |
| 1.3.6.1.4.1.4253.1.9.6.1.36 | ColumnmcmItuNum | read-only | mandatory | ITU number of the mcmt1/mcme1 Card. |
| 1.3.6.1.4.1.4253.1.9.7 | ScalarmcmPortNumber | read-only | mandatory | Number of MCMT1/MCME1 rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.9.8 | TablemcmPortTable | not-accessible | mandatory | This table represents the information for each MCMT1/MCME1 module's port. |
| 1.3.6.1.4.1.4253.1.9.8.1 | RowmcmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.9.8.1.1 | ColumnmcmPortCardLocation | read-only | mandatory | Location of the MCMT1/MCME1 port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.1.9.8.1.2 | ColumnmcmPortCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1..2. |
| 1.3.6.1.4.1.4253.1.9.8.1.3 | ColumnmcmPortCardSlot | read-only | mandatory | The slot within the shelf the Module is in. Valid values are: 1 to 17 |
| 1.3.6.1.4.1.4253.1.9.8.1.4 | ColumnmcmPortIndex | read-only | mandatory | Port's index. |
| 1.3.6.1.4.1.4253.1.9.8.1.5 | ColumnmcmPortConnection | read-write | mandatory | Port's connection status. |
| 1.3.6.1.4.1.4253.1.9.8.1.6 | ColumnmcmPortFraming | read-write | mandatory | Type of framing. esf(1) and d4(2) are for mcmt1. crc4(3) is for mcme1. For mcme1, this release of hardware and software only supports fixed configuration, CRC4… |
| 1.3.6.1.4.1.4253.1.9.8.1.7 | ColumnmcmPortLineCoding | read-write | mandatory | Type of line coding. b8zs(1) and ami(2) are for mcmt1. hdb3(3) is for mcme1. For mcme1, this release of hardware and software only supports fixed configuration… |
| 1.3.6.1.4.1.4253.1.9.8.1.8 | ColumnmcmPortLineEqualizer | read-write | mandatory | The Line equilizer. ft0to133(1), ft133to266(2), ft266to399(3), ft399to533(4), and ft533to655(5) are for mcmt1. minus43dB(6) is for mcme1. For mcme1, this relea… |
| 1.3.6.1.4.1.4253.1.9.8.1.9 | ColumnmcmPortImpedance | read-only | mandatory | Port impedance. ohms-100(1) is for mcmt1. ohms-75(2) and ohms-120(3) are for mcme1. For mcme1, this release of hardware and software only supports fixed config… |
| 1.3.6.1.4.1.4253.1.10 | Nodefn | |||
| 1.3.6.1.4.1.4253.1.10.1 | ScalarfnNumber | not-accessible | mandatory | Number of fn rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.10.2 | TablefnTable | not-accessible | mandatory | This table represents the information for each fn. |
| 1.3.6.1.4.1.4253.1.10.2.1 | RowfnEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.10.2.1.1 | ColumnfnID | not-accessible | mandatory | The slot ID the fn is in. Valid values are: 1 to 4 |
| 1.3.6.1.4.1.4253.1.10.2.1.2 | ColumnfnMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the fn |
| 1.3.6.1.4.1.4253.1.10.2.1.3 | ColumnfnSerialNum | not-accessible | mandatory | Serial # of the fn. Not Supported Yet. |
| 1.3.6.1.4.1.4253.1.10.2.1.4 | ColumnfnModelType | not-accessible | mandatory | Model type of the fn. Up to 10 characters. Not Supported Yet. |
| 1.3.6.1.4.1.4253.1.11 | Nodecsim | |||
| 1.3.6.1.4.1.4253.1.11.1 | ScalarcsimSysMode | read-write | mandatory | The ColorSim Mode of the Chassis. The value Enable means that the ColorSim feature is enabled for all the interface cards. An action element, returns other on … |
| 1.3.6.1.4.1.4253.1.11.2 | TablecsimTable | not-accessible | mandatory | Each entry in this table represents the information for each colorsim card. |
| 1.3.6.1.4.1.4253.1.11.2.1 | RowcsimEntry | not-accessible | mandatory | Specifies the index for each row in the table below. |
| 1.3.6.1.4.1.4253.1.11.2.1.1 | ColumncsimLocation | read-only | mandatory | Location of the card. Valid values are: Local in the same chassis, or remote to this chassis. |
| 1.3.6.1.4.1.4253.1.11.2.1.2 | ColumncsimShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.1.11.2.1.3 | ColumncsimSlot | read-only | mandatory | This card occupies two slots currently. |
| 1.3.6.1.4.1.4253.1.11.2.1.4 | ColumncsimMode | read-write | mandatory | The Mode of ColorSIM for this entry. The Modes are Enable or Disable. |
| 1.3.6.1.4.1.4253.1.11.2.1.5 | ColumncsimDCMode | read-write | mandatory | The Data Collection Mode of ColorSIM. |
| 1.3.6.1.4.1.4253.1.11.2.1.6 | ColumncsimGatingIntvl | read-write | mandatory | The Gating Interval in seconds in which the incoming data stream is being monitored for errors. |
| 1.3.6.1.4.1.4253.1.11.2.1.7 | ColumncsimUpdtIntvl | read-write | mandatory | Number of gating intervals to be processed before the data is logged for reporting purposes. |
| 1.3.6.1.4.1.4253.1.11.2.1.8 | ColumncsimSEIThreshold | read-write | mandatory | The SEI Threshold of ColorSIM specifies the maximum number of errored bits that may have occurred during a single gating interval before the interval is consid… |
| 1.3.6.1.4.1.4253.1.12 | Noderpsm | |||
| 1.3.6.1.4.1.4253.1.12.1 | ScalarrpsmBootPromVer | not-accessible | mandatory | The current version string of the rpsm Boot PROM code |
| 1.3.6.1.4.1.4253.1.12.2 | ScalarrpsmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.12.3 | ScalarrpsmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.12.4 | TablerpsmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.12.4.1 | RowrpsmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.12.4.1.1 | ColumnrpsmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.12.4.1.2 | ColumnrpsmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.12.4.1.3 | ColumnrpsmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.12.4.1.4 | ColumnrpsmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.12.5 | ScalarrpsmNumber | not-accessible | mandatory | Number of RPSM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.12.6 | TablerpsmTable | not-accessible | mandatory | This table represents the information for each RPSM card |
| 1.3.6.1.4.1.4253.1.12.6.1 | RowrpsmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.12.6.1.1 | ColumnrpsmCardLocation | not-accessible | mandatory | Location of the RPSM card. Valid values are: Local in the same chassis, or remote to this chassis. |
| 1.3.6.1.4.1.4253.1.12.6.1.2 | ColumnrpsmCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.12.6.1.3 | ColumnrpsmCardSlot | not-accessible | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.12.6.1.4 | ColumnrpsmModelNum | not-accessible | mandatory | RPSM's model number. |
| 1.3.6.1.4.1.4253.1.12.6.1.5 | ColumnrpsmOpticsMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the optics on the RPSM card. |
| 1.3.6.1.4.1.4253.1.12.6.1.6 | ColumnrpsmSerialNum | not-accessible | mandatory | Serial # of the RPSM card. |
| 1.3.6.1.4.1.4253.1.12.6.1.7 | ColumnrpsmModelType | not-accessible | mandatory | Model type of the RPSM. |
| 1.3.6.1.4.1.4253.1.12.6.1.8 | ColumnrpsmHWName | not-accessible | mandatory | Manufacturing Hardware name of the RPSM Card. |
| 1.3.6.1.4.1.4253.1.12.6.1.9 | ColumnrpsmFWVersionID | not-accessible | mandatory | The current version string of the RPSM FW code |
| 1.3.6.1.4.1.4253.1.12.6.1.10 | ColumnrpsmCardName | not-accessible | mandatory | User configurable card name. |
| 1.3.6.1.4.1.4253.1.12.6.1.11 | ColumnrpsmFWName | not-accessible | mandatory | RPSM's Firmware Name. |
| 1.3.6.1.4.1.4253.1.12.6.1.12 | ColumnrpsmFWDate | not-accessible | mandatory | Date and Time of latest Firmware of the RPSM card. |
| 1.3.6.1.4.1.4253.1.12.6.1.13 | ColumnrpsmHWVersionID | not-accessible | mandatory | The current version string of the RPSM HW code. |
| 1.3.6.1.4.1.4253.1.12.6.1.14 | ColumnrpsmHWDate | not-accessible | mandatory | Date and Time of Hardware of the RPSM card. |
| 1.3.6.1.4.1.4253.1.12.6.1.15 | ColumnrpsmSetState | not-accessible | mandatory | Instruct the rpsm to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.12.6.1.16 | ColumnrpsmExpressLoss | not-accessible | mandatory | Insertion loss for the expressed channel through the RPSM module in dB. |
| 1.3.6.1.4.1.4253.1.12.6.1.17 | ColumnrpsmMarginForSwitch | not-accessible | mandatory | Switching threshold in dB for protection switch to occur. |
| 1.3.6.1.4.1.4253.1.12.6.1.18 | ColumnrpsmMinProtPowerForSwitch | not-accessible | mandatory | Minimum protection link's light power in dBm to allow protection switching to occur. |
| 1.3.6.1.4.1.4253.1.12.6.1.19 | ColumnrpsmDeBounce | not-accessible | mandatory | Debounce in number of times to measure low light power before protection switch. |
| 1.3.6.1.4.1.4253.1.12.6.1.20 | ColumnrpsmBlackOutTime | not-accessible | mandatory | Black out time in unit of 0.1 second after protection switch to allow another protection switch to occur again. |
| 1.3.6.1.4.1.4253.1.12.6.1.21 | ColumnrpsmSwitch | not-accessible | mandatory | instruct the RPSM to take on an action, such as: switch to link A or link B. A get would alway return other(1). |
| 1.3.6.1.4.1.4253.1.12.6.1.22 | ColumnrpsmAddDropLoss | not-accessible | mandatory | Insertion loss of the Add/Drop path through the RPSM module in dB. |
| 1.3.6.1.4.1.4253.1.12.6.1.23 | ColumnrpsmPathID | not-accessible | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.12.6.1.24 | ColumnrpsmAdminState | not-accessible | mandatory | Administrative control over that rpsm card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.12.7 | TablerpsmPortTable | not-accessible | mandatory | This table represents the physical connection for each RPSM card's port. |
| 1.3.6.1.4.1.4253.1.12.7.1 | RowrpsmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.12.7.1.1 | ColumnrpsmPortCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.12.7.1.2 | ColumnrpsmPortCardSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.12.7.1.3 | ColumnrpsmPortType | not-accessible | mandatory | Type of the RPSM's port. The order is CLI compatible. |
| 1.3.6.1.4.1.4253.1.12.7.1.4 | ColumnrpsmConnCardType | not-accessible | mandatory | Type of connection. Valid values are ocmu(2), ocmItu(3), mux(4), demux(5), mcm(8), w4cd(10), w2cmd(13), w4cm(21), osam(20), fadm(6), oppm(7), fadmb(19), ocme(2… |
| 1.3.6.1.4.1.4253.1.12.7.1.5 | ColumnrpsmConnPort | not-accessible | mandatory | Conn port for RPSM's port.Possible values based on card types that can connect to RPSM are: OFCM/OFCD: 1/2/3/4= port index, 5=EXP, 6=OUT/IN W4CM/W4CD: 1=1510, … |
| 1.3.6.1.4.1.4253.1.12.7.1.6 | ColumnrpsmConnShelf | not-accessible | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.12.7.1.7 | ColumnrpsmConnSlot | not-accessible | mandatory | The slot within the shelf the card conn to. |
| 1.3.6.1.4.1.4253.1.13 | Nodersdm | |||
| 1.3.6.1.4.1.4253.1.13.1 | ScalarrsdmBootPromVer | not-accessible | mandatory | The current version string of the rsdm Boot PROM code |
| 1.3.6.1.4.1.4253.1.13.2 | ScalarrsdmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.13.3 | ScalarrsdmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.13.4 | TablersdmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.13.4.1 | RowrsdmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.13.4.1.1 | ColumnrsdmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.13.4.1.2 | ColumnrsdmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.13.4.1.3 | ColumnrsdmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.13.4.1.4 | ColumnrsdmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.13.5 | ScalarrsdmNumber | not-accessible | mandatory | Number of RSDM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.13.6 | TablersdmTable | not-accessible | mandatory | This table represents the information for each RSDM card |
| 1.3.6.1.4.1.4253.1.13.6.1 | RowrsdmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.13.6.1.1 | ColumnrsdmCardLocation | not-accessible | mandatory | Location of the RSDM card. Valid values are: Local in the same chassis, or remote to this chassis. |
| 1.3.6.1.4.1.4253.1.13.6.1.2 | ColumnrsdmCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 2 |
| 1.3.6.1.4.1.4253.1.13.6.1.3 | ColumnrsdmCardSlot | not-accessible | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.13.6.1.4 | ColumnrsdmModelNum | not-accessible | mandatory | RSDM's model number. |
| 1.3.6.1.4.1.4253.1.13.6.1.5 | ColumnrsdmOpticsMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the optics on the RSDM card. |
| 1.3.6.1.4.1.4253.1.13.6.1.6 | ColumnrsdmSerialNum | not-accessible | mandatory | Serial # of the RSDM card. |
| 1.3.6.1.4.1.4253.1.13.6.1.7 | ColumnrsdmModelType | not-accessible | mandatory | Model type of the RSDM. |
| 1.3.6.1.4.1.4253.1.13.6.1.8 | ColumnrsdmHWName | not-accessible | mandatory | Display Hardware name of the RSDM Card. |
| 1.3.6.1.4.1.4253.1.13.6.1.9 | ColumnrsdmCardName | not-accessible | mandatory | User configurable name of the RSDM Card. |
| 1.3.6.1.4.1.4253.1.13.6.1.10 | ColumnrsdmFWVersionID | not-accessible | mandatory | The current version string of the RSDM FW code |
| 1.3.6.1.4.1.4253.1.13.6.1.11 | ColumnrsdmFWName | not-accessible | mandatory | RSDM's Firmware Name. |
| 1.3.6.1.4.1.4253.1.13.6.1.12 | ColumnrsdmFWDate | not-accessible | mandatory | Date and Time of latest Firmware of the RSDM card. |
| 1.3.6.1.4.1.4253.1.13.6.1.13 | ColumnrsdmHWVersionID | not-accessible | mandatory | The current version string of the RSDM HW code. |
| 1.3.6.1.4.1.4253.1.13.6.1.14 | ColumnrsdmHWDate | not-accessible | mandatory | Date and Time of Hardware of the RSDM card. |
| 1.3.6.1.4.1.4253.1.13.6.1.15 | ColumnrsdmSetState | not-accessible | mandatory | Instruct the rsdm to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.13.6.1.16 | ColumnrsdmRxITUNumber | not-accessible | mandatory | Receive port's ITU wavelength number. |
| 1.3.6.1.4.1.4253.1.13.6.1.17 | ColumnrsdmTxITUNumber | not-accessible | mandatory | Transmit port's ITU wavelength number. |
| 1.3.6.1.4.1.4253.1.13.6.1.18 | ColumnrsdmRxInsertionLoss | not-accessible | mandatory | Receive port's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.13.6.1.19 | ColumnrsdmTxInsertionLoss | not-accessible | mandatory | Transmit port's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.13.6.1.20 | ColumnrsdmExpressLoss | not-accessible | mandatory | Insertion loss for the expressed channel through the RSDM module in dB. |
| 1.3.6.1.4.1.4253.1.13.6.1.21 | ColumnrsdmMarginForSwitch | not-accessible | mandatory | Switching threshold in dB for protection switch to occur. |
| 1.3.6.1.4.1.4253.1.13.6.1.22 | ColumnrsdmMinProtPowerForSwitch | not-accessible | mandatory | Minimum protection link's light power in dBm to allow protection switching to occur. |
| 1.3.6.1.4.1.4253.1.13.6.1.23 | ColumnrsdmDeBounce | not-accessible | mandatory | Debounce in number of times to measure low light power before protection switch. |
| 1.3.6.1.4.1.4253.1.13.6.1.24 | ColumnrsdmBlackOutTime | not-accessible | mandatory | Black out time in unit of 0.1 second after protection switch to allow another protection switch to occur again. |
| 1.3.6.1.4.1.4253.1.13.6.1.25 | ColumnrsdmSwitch | not-accessible | mandatory | Instruct the RSDM to take on an action, such as: switch to link A or link B. A snmp get would always return other(1). |
| 1.3.6.1.4.1.4253.1.13.6.1.26 | ColumnrsdmPathID | not-accessible | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.13.6.1.27 | ColumnrsdmAdminState | not-accessible | mandatory | Administrative control over that rsdm card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.13.7 | TablersdmPortTable | not-accessible | mandatory | This table represents the physical connection for each RSDM card's port. |
| 1.3.6.1.4.1.4253.1.13.7.1 | RowrsdmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.13.7.1.1 | ColumnrsdmPortCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.13.7.1.2 | ColumnrsdmPortCardSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.13.7.1.3 | ColumnrsdmPortType | not-accessible | mandatory | Type of the RSDM's port. The order is CLI compatible. |
| 1.3.6.1.4.1.4253.1.13.7.1.4 | ColumnrsdmConnCardType | not-accessible | mandatory | Type of connection. Valid values are ocmu(2), ocmItu(3), mux(4), demux(5), mcm(8), w4cd(10), w2cmd(13), w4cm(21), osam(20), fadm(6), oppm(7), fadmb(19), ocme(2… |
| 1.3.6.1.4.1.4253.1.13.7.1.5 | ColumnrsdmConnPort | not-accessible | mandatory | Conn port for RSDM's port.Possible values based on card types that can connect to RSDM are: OFCM/OFCD: 1/2/3/4= port index, 5=EXP, 6=OUT/IN W4CM/W4CD: 1=1510, … |
| 1.3.6.1.4.1.4253.1.13.7.1.6 | ColumnrsdmConnShelf | not-accessible | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.13.7.1.7 | ColumnrsdmConnSlot | not-accessible | mandatory | The slot within the shelf the card conn to. |
| 1.3.6.1.4.1.4253.1.14 | Nodertdm | |||
| 1.3.6.1.4.1.4253.1.14.1 | ScalarrtdmBootPromVer | not-accessible | mandatory | The current version string of the RTDM Boot PROM code |
| 1.3.6.1.4.1.4253.1.14.2 | ScalarrtdmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.14.3 | ScalarrtdmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.14.4 | TablertdmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.14.4.1 | RowrtdmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.14.4.1.1 | ColumnrtdmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.14.4.1.2 | ColumnrtdmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.14.4.1.3 | ColumnrtdmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.14.4.1.4 | ColumnrtdmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.14.5 | ScalarrtdmNumber | not-accessible | mandatory | Number of RTDM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.14.6 | TablertdmTable | not-accessible | mandatory | This table represents the information for each RTDM card |
| 1.3.6.1.4.1.4253.1.14.6.1 | RowrtdmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.14.6.1.1 | ColumnrtdmCardLocation | not-accessible | mandatory | Location of the RTDM card. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.1.14.6.1.2 | ColumnrtdmCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.1.14.6.1.3 | ColumnrtdmCardSlot | not-accessible | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.14.6.1.4 | ColumnrtdmModelNum | not-accessible | mandatory | Model number for RTDM. |
| 1.3.6.1.4.1.4253.1.14.6.1.5 | ColumnrtdmOpticsMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the optics on the RTDM card |
| 1.3.6.1.4.1.4253.1.14.6.1.6 | ColumnrtdmSerialNum | not-accessible | mandatory | Serial # of the RTDM card. |
| 1.3.6.1.4.1.4253.1.14.6.1.7 | ColumnrtdmModelType | not-accessible | mandatory | Model type of the RTDM |
| 1.3.6.1.4.1.4253.1.14.6.1.8 | ColumnrtdmHWName | not-accessible | mandatory | Display (Network) name of the RTDM Card |
| 1.3.6.1.4.1.4253.1.14.6.1.9 | ColumnrtdmFWVersionID | not-accessible | mandatory | The current version string of the RTDM FW code |
| 1.3.6.1.4.1.4253.1.14.6.1.10 | ColumnrtdmCardName | not-accessible | mandatory | User configurable card name. |
| 1.3.6.1.4.1.4253.1.14.6.1.11 | ColumnrtdmFWName | not-accessible | mandatory | RTDM's Firmware Name. |
| 1.3.6.1.4.1.4253.1.14.6.1.12 | ColumnrtdmFWDate | not-accessible | mandatory | Date and Time of latest Firmware of the RTDM card |
| 1.3.6.1.4.1.4253.1.14.6.1.13 | ColumnrtdmHWVersionID | not-accessible | mandatory | The current version string of the RTDM HW code |
| 1.3.6.1.4.1.4253.1.14.6.1.14 | ColumnrtdmHWDate | not-accessible | mandatory | Date and Time of Hardware of the RTDM card |
| 1.3.6.1.4.1.4253.1.14.6.1.15 | ColumnrtdmSetState | not-accessible | mandatory | Instruct the rtdm to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.14.6.1.16 | ColumnrtdmCommonEInsertionLoss | not-accessible | mandatory | The RTDM Common path East's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.14.6.1.17 | ColumnrtdmCommonWInsertionLoss | not-accessible | mandatory | The RTDM Common path West's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.14.6.1.18 | ColumnrtdmMonEastInsertionLoss | not-accessible | mandatory | The RTDM Monitor East Path's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.14.6.1.19 | ColumnrtdmMonWestInsertionLoss | not-accessible | mandatory | The RTDM Monitor West Path's insertion loss in dB. |
| 1.3.6.1.4.1.4253.1.14.6.1.20 | ColumnrtdmPathID | not-accessible | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.14.6.1.21 | ColumnrtdmAdminState | not-accessible | mandatory | Administrative control over that rtdm card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.14.7 | TablertdmPortTable | not-accessible | mandatory | This table represents the physical connection for each RTDM card's port. |
| 1.3.6.1.4.1.4253.1.14.7.1 | RowrtdmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.14.7.1.1 | ColumnrtdmPortCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.14.7.1.2 | ColumnrtdmPortCardSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.14.7.1.3 | ColumnrtdmPortType | not-accessible | mandatory | Type of the RTDM's port. The order is CLI compatible. |
| 1.3.6.1.4.1.4253.1.14.7.1.4 | ColumnrtdmConnCardType | not-accessible | mandatory | Type of connection. Valid values are ocmu(2), ocmItu(3), mux(4), demux(5), mcm(8), w4cd(10), w2cmd(13), w4cm(21), osam(20), fadm(6), oppm(7), fadmb(19), ocme(2… |
| 1.3.6.1.4.1.4253.1.14.7.1.5 | ColumnrtdmConnPort | not-accessible | mandatory | Conn port for RTDM's port.Possible values based on card types that can connect to RTDM are: OFCM/OFCD: 1/2/3/4= port index, 5=EXP, 6=OUT/IN W4CM/W4CD: 1=1510, … |
| 1.3.6.1.4.1.4253.1.14.7.1.6 | ColumnrtdmConnShelf | not-accessible | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.14.7.1.7 | ColumnrtdmConnSlot | not-accessible | mandatory | The slot within the shelf the card conn to. A zero will be used for no connections. |
| 1.3.6.1.4.1.4253.1.15 | Nodeosam | |||
| 1.3.6.1.4.1.4253.1.15.1 | ScalarosamBootPromVer | not-accessible | mandatory | The current version string of the osam boot prom code. |
| 1.3.6.1.4.1.4253.1.15.2 | ScalarosamROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobytes. |
| 1.3.6.1.4.1.4253.1.15.3 | ScalarosamNumSubDiv | not-accessible | mandatory | Number of the ROM's subdivisions. |
| 1.3.6.1.4.1.4253.1.15.4 | TableosamSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.15.4.1 | RowosamSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.15.4.1.1 | ColumnosamSubDivIndex | not-accessible | mandatory | Integer ID of each subdivision. |
| 1.3.6.1.4.1.4253.1.15.4.1.2 | ColumnosamSubDivDescr | not-accessible | mandatory | Display name of each subdivision. |
| 1.3.6.1.4.1.4253.1.15.4.1.3 | ColumnosamSubDivSize | not-accessible | mandatory | Size of each subdivision in Kbytes. |
| 1.3.6.1.4.1.4253.1.15.4.1.4 | ColumnosamSubDivOffset | not-accessible | mandatory | Starting address of each sub division in HEX format. |
| 1.3.6.1.4.1.4253.1.15.5 | ScalarosamNumber | read-only | mandatory | Number of rows in the osam table. |
| 1.3.6.1.4.1.4253.1.15.6 | TableosamTable | not-accessible | mandatory | This table represents the information for each osam card |
| 1.3.6.1.4.1.4253.1.15.6.1 | RowosamEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.15.6.1.1 | ColumnosamCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.2 | ColumnosamCardShelf | read-only | mandatory | The shelf number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.1.15.6.1.3 | ColumnosamCardSlot | read-write | mandatory | The slot number in which the module is plugged in. If a 0 is written into this mib element, the module will be deleted from the system. |
| 1.3.6.1.4.1.4253.1.15.6.1.4 | ColumnosamModelNum | read-only | mandatory | Manufacturing model number of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.5 | ColumnosamSerialNum | read-only | mandatory | Unique serial number of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.6 | ColumnosamModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.7 | ColumnosamHWName | read-only | mandatory | Manufacturing Hardware name of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.8 | ColumnosamHWVersionID | read-only | mandatory | The current hardware version string of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.9 | ColumnosamHWDate | read-only | mandatory | Date of manufacturing of the electronics portion of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.10 | ColumnosamFWName | read-only | mandatory | Manufacturing Firmware name of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.11 | ColumnosamFWVersionID | read-only | mandatory | The current firmware version string of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.12 | ColumnosamFWDate | read-only | mandatory | Release date for the firmware of the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.13 | ColumnosamCardName | read-write | mandatory | User configurable card name for the module. |
| 1.3.6.1.4.1.4253.1.15.6.1.14 | ColumnosamSetState | read-write | mandatory | Instruct the osam module to do a reset. A get on this will always return other. |
| 1.3.6.1.4.1.4253.1.15.6.1.15 | ColumnosamLaserState | read-only | mandatory | The operational state of the laser. |
| 1.3.6.1.4.1.4253.1.15.6.1.16 | ColumnosamOperationMode | read-write | mandatory | Operation mode of the module. powerControlled(3) is not supported by OSAM modules. currentControlled(1) is not supported OSAM-HP/LP modules. |
| 1.3.6.1.4.1.4253.1.15.6.1.17 | ColumnosamLaserBiasCurrent | read-write | mandatory | Constant current in mA to be used by the module when the operation mode is set to currentControlled. This value can't be set if operation mode is set to gainCo… |
| 1.3.6.1.4.1.4253.1.15.6.1.18 | ColumnosamAmplifierGain | read-write | mandatory | Constant gain in dB to be used by the module when the operation mode is set to gainControlled. This value can't be set if operation mode is set to currentContr… |
| 1.3.6.1.4.1.4253.1.15.6.1.19 | ColumnosamConfigCommit | read-write | mandatory | This allows the current module configuration to be stored in permanent storage. |
| 1.3.6.1.4.1.4253.1.15.6.1.20 | ColumnosamNoiseFigure | read-only | mandatory | The calibrated noise figure of the gain block in dB. Applicable only to OSAM module |
| 1.3.6.1.4.1.4253.1.15.6.1.21 | ColumnosamPathID | read-write | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.15.6.1.22 | ColumnosamAdminState | read-write | mandatory | Administrative control over that osam card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.15.6.1.23 | Columnosam2NoiseFigure | read-only | mandatory | The calibrated noise figure of the gain block in dBm. Applicable only to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.1.15.6.1.24 | Columnosam2GainReq | read-write | mandatory | Constant gain in dB to be used by the module when the operation mode is set to gainControlled. This value can't be set if operation mode is set to powerControl… |
| 1.3.6.1.4.1.4253.1.15.6.1.25 | Columnosam2OpPowerReq | read-write | mandatory | Constant output power in dBm to be used by the module when the operation mode is set to powerControlled. This value can't be set if operation mode is set to ga… |
| 1.3.6.1.4.1.4253.1.15.6.1.26 | ColumnosamCleiNum | read-only | mandatory | CLEI number of the osam Card. |
| 1.3.6.1.4.1.4253.1.15.6.1.27 | ColumnosamNumPorts | read-only | mandatory | Total port numbers on each OSAM card. |
| 1.3.6.1.4.1.4253.1.15.7 | TableosamPortTable | not-accessible | mandatory | This table represents the physical connection for each OSAM card's port. |
| 1.3.6.1.4.1.4253.1.15.7.1 | RowosamPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.15.7.1.1 | ColumnosamPortCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.15.7.1.2 | ColumnosamPortCardSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.15.7.1.3 | ColumnosamPortType | read-write | mandatory | Type of the OSAM's port. |
| 1.3.6.1.4.1.4253.1.15.7.1.4 | ColumnosamConnCardType | read-write | mandatory | Module type connectioned to osam port. |
| 1.3.6.1.4.1.4253.1.15.7.1.5 | ColumnosamConnPort | read-write | mandatory | Conn port for OSAM's port. Possible values based on card types that can be connected to OSAM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn… |
| 1.3.6.1.4.1.4253.1.15.7.1.6 | ColumnosamConnShelf | read-write | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.15.7.1.7 | ColumnosamConnSlot | read-write | mandatory | The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. |
| 1.3.6.1.4.1.4253.1.15.7.1.8 | ColumnosamPortCardType | read-only | mandatory | Type of OSAM module. |
| 1.3.6.1.4.1.4253.1.15.7.1.9 | ColumnosamConnLocation | read-only | mandatory | The chassis's location of the card connected to. |
| 1.3.6.1.4.1.4253.1.15.7.1.10 | ColumnosamConnChassisID | read-only | mandatory | Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the l… |
| 1.3.6.1.4.1.4253.1.15.7.1.11 | ColumnosamConnSystemName | read-only | mandatory | System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of th… |
| 1.3.6.1.4.1.4253.1.15.7.1.12 | ColumnosamConnIpAddress | read-only | mandatory | IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the no… |
| 1.3.6.1.4.1.4253.1.16 | Nodersm | |||
| 1.3.6.1.4.1.4253.1.16.1 | ScalarrsmBootPromVer | not-accessible | mandatory | The current version string of the rsm Boot PROM code |
| 1.3.6.1.4.1.4253.1.16.2 | ScalarrsmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.16.3 | ScalarrsmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.16.4 | TablersmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.16.4.1 | RowrsmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.16.4.1.1 | ColumnrsmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.16.4.1.2 | ColumnrsmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.16.4.1.3 | ColumnrsmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.16.4.1.4 | ColumnrsmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.16.5 | ScalarrsmNumber | read-only | mandatory | Number of RSM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.16.6 | TablersmTable | not-accessible | mandatory | This table represents the information for each RSM card |
| 1.3.6.1.4.1.4253.1.16.6.1 | RowrsmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.16.6.1.1 | ColumnrsmCardLocation | read-only | mandatory | Location of the RSM card. Valid values are: Local in the same chassis. |
| 1.3.6.1.4.1.4253.1.16.6.1.2 | ColumnrsmCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.16.6.1.3 | ColumnrsmCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.16.6.1.4 | ColumnrsmModelNum | read-only | mandatory | RSM's model number. |
| 1.3.6.1.4.1.4253.1.16.6.1.5 | ColumnrsmOpticsMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the optics on the RSM card. |
| 1.3.6.1.4.1.4253.1.16.6.1.6 | ColumnrsmSerialNum | read-only | mandatory | Serial # of the RSM card. |
| 1.3.6.1.4.1.4253.1.16.6.1.7 | ColumnrsmModelType | read-only | mandatory | Model type of the RSM. |
| 1.3.6.1.4.1.4253.1.16.6.1.8 | ColumnrsmHWName | read-only | mandatory | Manufacturing Hardware name of the RSM Card. |
| 1.3.6.1.4.1.4253.1.16.6.1.9 | ColumnrsmCardName | read-write | mandatory | User configurable card name. |
| 1.3.6.1.4.1.4253.1.16.6.1.10 | ColumnrsmFWName | read-only | mandatory | RSM's Firmware Name. |
| 1.3.6.1.4.1.4253.1.16.6.1.11 | ColumnrsmFWVersionID | read-only | mandatory | The current version string of the RSM FW code. |
| 1.3.6.1.4.1.4253.1.16.6.1.12 | ColumnrsmFWDate | read-only | mandatory | Date and Time of latest Firmware of the RSM card. |
| 1.3.6.1.4.1.4253.1.16.6.1.13 | ColumnrsmSetState | read-write | mandatory | Instruct the rsm to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.16.6.1.14 | ColumnrsmRxInsertionLoss | read-only | mandatory | Insertion loss for Rx Path. |
| 1.3.6.1.4.1.4253.1.16.6.1.15 | ColumnrsmRxComInsertionLoss | read-only | mandatory | Insertion loss for Rx Com Path. |
| 1.3.6.1.4.1.4253.1.16.6.1.16 | ColumnrsmWorkingWavelength | read-only | mandatory | The RSM ITU number. |
| 1.3.6.1.4.1.4253.1.16.6.1.17 | ColumnrsmLinkAPathID | read-write | mandatory | Rsm LinkA Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card l… |
| 1.3.6.1.4.1.4253.1.16.6.1.18 | ColumnrsmLinkBPathID | read-write | mandatory | Rsm LinkB Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card l… |
| 1.3.6.1.4.1.4253.1.16.6.1.19 | ColumnrsmAdminState | read-write | mandatory | Administrative control over that rsm card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.16.6.1.20 | ColumnrsmCleiNum | read-only | mandatory | CLEI number of the rsm Card. |
| 1.3.6.1.4.1.4253.1.16.6.1.21 | ColumnrsmNumPorts | read-only | mandatory | Total port numbers on each RSM card. |
| 1.3.6.1.4.1.4253.1.16.7 | TablersmPortTable | not-accessible | mandatory | This table represents the information for each RSM card's port. |
| 1.3.6.1.4.1.4253.1.16.7.1 | RowrsmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.16.7.1.1 | ColumnrsmPortCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.16.7.1.2 | ColumnrsmPortCardSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.16.7.1.3 | ColumnrsmPortType | read-only | mandatory | Type of the RSM's port. The order is CLI compatible. |
| 1.3.6.1.4.1.4253.1.16.7.1.4 | ColumnrsmConnCardType | read-write | mandatory | Module type connected to rsm port. The valid module types are OCM10G/OCME/OCMITU/OCMU. |
| 1.3.6.1.4.1.4253.1.16.7.1.5 | ColumnrsmConnShelf | read-write | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.16.7.1.6 | ColumnrsmConnSlot | read-write | mandatory | The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. |
| 1.3.6.1.4.1.4253.1.16.7.1.7 | ColumnrsmConnPort | read-write | mandatory | Conn port for RSM's port. Only OCM10G/OCME/OCMITU/OCMU can be connected to RSM. The possible values are: OCM10G/OCME/OCMITU/OCMU: 3=CPE Tx, 4=CPE Rx |
| 1.3.6.1.4.1.4253.1.17 | Nodeupsm | |||
| 1.3.6.1.4.1.4253.1.17.1 | ScalarupsmBootPromVer | not-accessible | mandatory | The current version string of the rsm Boot PROM code |
| 1.3.6.1.4.1.4253.1.17.2 | ScalarupsmROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.17.3 | ScalarupsmNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.17.4 | TableupsmSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.17.4.1 | RowupsmSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.17.4.1.1 | ColumnupsmSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.17.4.1.2 | ColumnupsmSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.17.4.1.3 | ColumnupsmSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.17.4.1.4 | ColumnupsmSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.17.5 | ScalarupsmNumber | read-only | mandatory | Number of UPSM rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.17.6 | TableupsmTable | not-accessible | mandatory | This table represents the information for each UPSM card |
| 1.3.6.1.4.1.4253.1.17.6.1 | RowupsmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.17.6.1.1 | ColumnupsmCardLocation | read-only | mandatory | Location of the UPSM card. Valid values are: Local in the same chassis. |
| 1.3.6.1.4.1.4253.1.17.6.1.2 | ColumnupsmCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.17.6.1.3 | ColumnupsmCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.17.6.1.4 | ColumnupsmModelNum | read-only | mandatory | UPSM's model number. |
| 1.3.6.1.4.1.4253.1.17.6.1.5 | ColumnupsmOpticsMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the optics on the UPSM card. |
| 1.3.6.1.4.1.4253.1.17.6.1.6 | ColumnupsmSerialNum | read-only | mandatory | Serial # of the UPSM card. |
| 1.3.6.1.4.1.4253.1.17.6.1.7 | ColumnupsmModelType | read-only | mandatory | Model type of the UPSM. |
| 1.3.6.1.4.1.4253.1.17.6.1.8 | ColumnupsmHWName | read-only | mandatory | Manufacturing Hardware name of the UPSM Card. |
| 1.3.6.1.4.1.4253.1.17.6.1.9 | ColumnupsmCardName | read-write | mandatory | User configurable card name. |
| 1.3.6.1.4.1.4253.1.17.6.1.10 | ColumnupsmFWName | read-only | mandatory | UPSM's Firmware Name. |
| 1.3.6.1.4.1.4253.1.17.6.1.11 | ColumnupsmFWVersionID | read-only | mandatory | The current version string of the UPSM FW code. |
| 1.3.6.1.4.1.4253.1.17.6.1.12 | ColumnupsmFWDate | read-only | mandatory | Date and Time of latest Firmware of the UPSM card. |
| 1.3.6.1.4.1.4253.1.17.6.1.13 | ColumnupsmSetState | read-write | mandatory | Instruct the upsm to do a warmboot. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.17.6.1.14 | ColumnupsmRxInsertionLoss | read-only | mandatory | Insertion loss for Rx Path. |
| 1.3.6.1.4.1.4253.1.17.6.1.15 | ColumnupsmTxInsertionLoss | read-only | mandatory | Insertion loss for Tx Path. |
| 1.3.6.1.4.1.4253.1.17.6.1.16 | ColumnupsmMarginForSwitch | read-write | mandatory | The UPSM switching threshold for protection switch to occur. The limit is from -32 to -6. Switching threshold must be 1 dBm or more less than the minimum switc… |
| 1.3.6.1.4.1.4253.1.17.6.1.17 | ColumnupsmMinProtPowerForSwitch | read-write | mandatory | The minimum protection link power to allow protection switch to function. The limit is from -30 to -5. This value should be 1 dBm or more greater than the swit… |
| 1.3.6.1.4.1.4253.1.17.6.1.18 | ColumnupsmDebounce | read-only | mandatory | The number of times to measure low power condition before performing protection switch. |
| 1.3.6.1.4.1.4253.1.17.6.1.19 | ColumnupsmBlackOutTime | read-only | mandatory | The time after protection switch before allowing another protection switch. |
| 1.3.6.1.4.1.4253.1.17.6.1.20 | ColumnupsmSwitch | read-write | mandatory | The Link switch control. switchToLinkA or switchToLinkB option would disable auto switch functionality. Auto switch functionality can be turned on by setting t… |
| 1.3.6.1.4.1.4253.1.17.6.1.21 | ColumnupsmLinkAPathID | read-write | mandatory | Upsm LinkA Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card … |
| 1.3.6.1.4.1.4253.1.17.6.1.22 | ColumnupsmLinkBPathID | read-write | mandatory | Upsm LinkB Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card … |
| 1.3.6.1.4.1.4253.1.17.6.1.23 | ColumnupsmAdminState | read-write | mandatory | Administrative control over that upsm card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.17.6.1.24 | ColumnupsmCleiNum | read-only | mandatory | CLEI number of the upsm Card. |
| 1.3.6.1.4.1.4253.1.17.6.1.25 | ColumnupsmSwitchState | read-only | mandatory | The switching state. Switching state may be either auto or forced. The auto state means automatic switching is enabled. Forced state means swithcing is disable… |
| 1.3.6.1.4.1.4253.1.17.6.1.26 | ColumnupsmNumPorts | read-only | mandatory | Total port numbers on each UPSM card. |
| 1.3.6.1.4.1.4253.1.17.7 | TableupsmPortTable | not-accessible | mandatory | This table represents the information for each UPSM card's port. |
| 1.3.6.1.4.1.4253.1.17.7.1 | RowupsmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.17.7.1.1 | ColumnupsmPortCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.17.7.1.2 | ColumnupsmPortCardSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.1.17.7.1.3 | ColumnupsmPortType | read-only | mandatory | Type of the UPSM's port. The order is CLI compatible. |
| 1.3.6.1.4.1.4253.1.17.7.1.4 | ColumnupsmConnLocation | read-write | mandatory | The chassis's location of the card conn to. |
| 1.3.6.1.4.1.4253.1.17.7.1.5 | ColumnupsmConnIpAddress | read-write | mandatory | IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the no… |
| 1.3.6.1.4.1.4253.1.17.7.1.6 | ColumnupsmConnChassisID | read-write | mandatory | Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the l… |
| 1.3.6.1.4.1.4253.1.17.7.1.7 | ColumnupsmConnSystemName | read-write | mandatory | System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of th… |
| 1.3.6.1.4.1.4253.1.17.7.1.8 | ColumnupsmConnCardType | read-write | mandatory | Module type connected to upsm port. |
| 1.3.6.1.4.1.4253.1.17.7.1.9 | ColumnupsmConnPort | read-write | mandatory | Conn port for UPSM's port. Possible values based on card types that can connect to UPSM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx… |
| 1.3.6.1.4.1.4253.1.17.7.1.10 | ColumnupsmConnShelf | read-write | mandatory | The shelf the card conn to. Valid values are: 1 to 2. |
| 1.3.6.1.4.1.4253.1.17.7.1.11 | ColumnupsmConnSlot | read-write | mandatory | The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. |
| 1.3.6.1.4.1.4253.1.18 | Nodemcmesc | |||
| 1.3.6.1.4.1.4253.1.18.1 | ScalarmcmescBootPromVer | not-accessible | mandatory | The current version string of the mcmesc Boot PROM code |
| 1.3.6.1.4.1.4253.1.18.2 | ScalarmcmescROMSize | not-accessible | mandatory | Total Size of the ROM in Kilobyes |
| 1.3.6.1.4.1.4253.1.18.3 | ScalarmcmescNumSubDiv | not-accessible | mandatory | Number of the subdivisions of the ROM. |
| 1.3.6.1.4.1.4253.1.18.4 | TablemcmescSubDivTable | not-accessible | mandatory | This table represents the number of sub divisions and the size of each subdivision in ROM memory |
| 1.3.6.1.4.1.4253.1.18.4.1 | RowmcmescSubDivEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.18.4.1.1 | ColumnmcmescSubDivIndex | not-accessible | mandatory | Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM. |
| 1.3.6.1.4.1.4253.1.18.4.1.2 | ColumnmcmescSubDivDescr | not-accessible | mandatory | Display Name of each Sub Division in ROM |
| 1.3.6.1.4.1.4253.1.18.4.1.3 | ColumnmcmescSubDivSize | not-accessible | mandatory | Size of each sub division in ROM in kilobytes |
| 1.3.6.1.4.1.4253.1.18.4.1.4 | ColumnmcmescSubDivOffset | not-accessible | mandatory | Starting address of each sub division in the ROM in HEX notation. |
| 1.3.6.1.4.1.4253.1.18.5 | ScalarmcmescNumber | read-only | mandatory | Number of rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.18.6 | TablemcmescTable | not-accessible | mandatory | This table represents the information for each mcmesc module |
| 1.3.6.1.4.1.4253.1.18.6.1 | RowmcmescEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.18.6.1.1 | ColumnmcmescCardLocation | read-only | mandatory | Location of the mcmesc Module. |
| 1.3.6.1.4.1.4253.1.18.6.1.2 | ColumnmcmescCardShelf | read-only | mandatory | The shelf of the mcmesc is in. Valid values are: 1..2 |
| 1.3.6.1.4.1.4253.1.18.6.1.3 | ColumnmcmescCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.18.6.1.4 | ColumnmcmescMfgDate | read-only | mandatory | Date and Time of calibration of the mcmesc card |
| 1.3.6.1.4.1.4253.1.18.6.1.5 | ColumnmcmescSerialNum | read-only | mandatory | Serial # of the mcmesc card. |
| 1.3.6.1.4.1.4253.1.18.6.1.6 | ColumnmcmescModelType | read-only | mandatory | Model type of the mcmesc |
| 1.3.6.1.4.1.4253.1.18.6.1.7 | ColumnmcmescModelNum | read-only | mandatory | Model number of the MCMESC card. Up to 15 characters |
| 1.3.6.1.4.1.4253.1.18.6.1.8 | ColumnmcmescName | read-write | mandatory | Display (Network) name of the MCMESC Module |
| 1.3.6.1.4.1.4253.1.18.6.1.9 | ColumnmcmescHWName | read-only | mandatory | Display Hardware name of the MCMESC Card. |
| 1.3.6.1.4.1.4253.1.18.6.1.10 | ColumnmcmescNumPorts | read-only | mandatory | Total port numbers of MCM module. |
| 1.3.6.1.4.1.4253.1.18.6.1.11 | ColumnmcmescFWVersionID | read-only | mandatory | The current version string of the MCMESC FW code |
| 1.3.6.1.4.1.4253.1.18.6.1.12 | Columnmcmesc2ndFWVersionID | read-only | mandatory | The version string of the MCMESC second FW code |
| 1.3.6.1.4.1.4253.1.18.6.1.13 | ColumnmcmescFPGAVersionID | read-only | mandatory | The current version string of the MCMESC FPGA code |
| 1.3.6.1.4.1.4253.1.18.6.1.14 | Columnmcmesc2ndFPGAVersionID | read-only | mandatory | The version string of the MCMESC second FPGA code |
| 1.3.6.1.4.1.4253.1.18.6.1.15 | ColumnmcmescBoardSerialNum | read-only | mandatory | Serial # of the MCMESC board. |
| 1.3.6.1.4.1.4253.1.18.6.1.16 | ColumnmcmescBoardVersionID | read-only | mandatory | The version string of the MCMESC board |
| 1.3.6.1.4.1.4253.1.18.6.1.17 | ColumnmcmescDaughterBoard1SerialNum | read-only | mandatory | Serial # of the MCMESC daughter board 1. |
| 1.3.6.1.4.1.4253.1.18.6.1.18 | ColumnmcmescDaughterBoard1VersionID | read-only | mandatory | The version string of the MCMESC daughter board 1 |
| 1.3.6.1.4.1.4253.1.18.6.1.19 | ColumnmcmescDaughterBoard2SerialNum | read-only | mandatory | Serial # of the MCMESC daughter board 2. |
| 1.3.6.1.4.1.4253.1.18.6.1.20 | ColumnmcmescDaughterBoard2VersionID | read-only | mandatory | The version string of the MCMESC daughter board 2 |
| 1.3.6.1.4.1.4253.1.18.6.1.21 | ColumnmcmescCleiNum | read-only | mandatory | CLEI number of the MCMESC Card. |
| 1.3.6.1.4.1.4253.1.18.6.1.22 | ColumnmcmescLinkWavelength | read-only | mandatory | Link Wavelength of the MCMESC card |
| 1.3.6.1.4.1.4253.1.18.6.1.23 | ColumnmcmescLinkSfpSerialNum | read-only | mandatory | Link port's SFP serial number. |
| 1.3.6.1.4.1.4253.1.18.6.1.24 | ColumnmcmescAdminState | read-write | mandatory | Administrative control over that MCMESC card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.18.6.1.25 | ColumnmcmescLinkName | read-write | mandatory | Link name for fiber between the local and the remote MCMESC card. |
| 1.3.6.1.4.1.4253.1.18.6.1.26 | ColumnmcmescPathID | read-write | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.18.6.1.27 | ColumnmcmescOverride | read-write | mandatory | MPM overrides the settings stored on MCMESC card upon detecting it. Default value is no. Not applicable to remote MCMESC. |
| 1.3.6.1.4.1.4253.1.18.6.1.28 | ColumnmcmescPerfInterval | read-write | mandatory | The interval, in seconds, in which MCMESC collects the performance data, ranging 60 to 3600. |
| 1.3.6.1.4.1.4253.1.18.6.1.29 | ColumnmcmescCpeRxSigLowThreshold | read-write | mandatory | The threshold of reporting CPE port Rx signal low alarm, in dBm, ranging from -29 to -7. |
| 1.3.6.1.4.1.4253.1.18.6.1.30 | ColumnmcmescLinkRxSigLowThreshold | read-write | mandatory | The threshold of reporting Link Rx signal low alarm, in dBm, ranging from -29 to -7. |
| 1.3.6.1.4.1.4253.1.18.6.1.31 | ColumnmcmescCpeErrEventThreshold | read-write | mandatory | The threshold of reporting CPE error event, in the form of 1.0E-x. Only x needs to be set and will be read. The range of x is from 5 to 15, however, input shou… |
| 1.3.6.1.4.1.4253.1.18.6.1.32 | ColumnmcmescCpeErrAlarmThreshold | read-write | mandatory | The threshold of reporting CPE error alarm, in the form of 1.0E-x. The range of x is from 4 to 14, however, input should be an absolute value if using mib brow… |
| 1.3.6.1.4.1.4253.1.18.6.1.33 | ColumnmcmescLinkErrEventThreshold | read-write | mandatory | The threshold of reporting LINK error event, in the form of 1.0E-x. The range of x is from 5 to 15, however, input should be an absolute value if using mib bro… |
| 1.3.6.1.4.1.4253.1.18.6.1.34 | ColumnmcmescLinkErrAlarmThreshold | read-write | mandatory | The threshold of reporting LINK error alarm, in the form of 1.0E-x. The range of x is from 4 to 14, however, input should be an absolute value if using mib bro… |
| 1.3.6.1.4.1.4253.1.18.6.1.35 | ColumnmcmescTestSequence | read-write | mandatory | Turn on or off the test-sequence on link. The operation will take place on the remote MCMESC if it's connected. |
| 1.3.6.1.4.1.4253.1.18.6.1.36 | ColumnmcmescConnMuxShelf | read-only | mandatory | The connected W4CM/UPSM shelf. |
| 1.3.6.1.4.1.4253.1.18.6.1.37 | ColumnmcmescConnMuxSlot | read-only | mandatory | The connected W4CM/UPSM slot. |
| 1.3.6.1.4.1.4253.1.18.6.1.38 | ColumnmcmescConnMuxPort | read-only | mandatory | The connected W4CM/UPSM port. W4CM: 1=1470/1510, 2=1490/1530, 3=15501590/, 4=1570/1610, 5=EXP, 6=IN/OUT; UPSM: 1=Link A Tx, 2=Link A Rx, 3=Link B Tx, 4=Link B … |
| 1.3.6.1.4.1.4253.1.18.6.1.39 | ColumnmcmescConnDemuxShelf | read-only | mandatory | The connected W4CD/UPSM shelf. |
| 1.3.6.1.4.1.4253.1.18.6.1.40 | ColumnmcmescConnDemuxSlot | read-only | mandatory | The connected W4CD/UPSM slot. |
| 1.3.6.1.4.1.4253.1.18.6.1.41 | ColumnmcmescConnDemuxPort | read-only | mandatory | The connected W4CD/UPSM port. W4CD: 1=1470/1510, 2=1490/1530, 3=15501590/, 4=1570/1610, 5=EXP, 6=IN/OUT; UPSM: 1=Link A Tx, 2=Link A Rx, 3=Link B Tx, 4=Link B … |
| 1.3.6.1.4.1.4253.1.18.6.1.42 | ColumnmcmescConnTxOcmShelf | read-only | mandatory | The connected OCM shelf (from MCMESC's Link Tx). |
| 1.3.6.1.4.1.4253.1.18.6.1.43 | ColumnmcmescConnTxOcmSlot | read-only | mandatory | The connected OCM slot (from MCMESC's Link Tx). |
| 1.3.6.1.4.1.4253.1.18.6.1.44 | ColumnmcmescConnTxOcmPort | read-only | mandatory | The connected OCM port (from MCMESC's Link Tx). 3=OCM's CPE-Tx, 4=OCM's Rx. Only 4 is valid. |
| 1.3.6.1.4.1.4253.1.18.6.1.45 | ColumnmcmescConnTxOcmShelfSlot | read-write | mandatory | Add a connection from MCMESC Link-Tx to an OCM CPE-Rx by specifying the OCM's shelf and slot. The format is shlef,slot. If either MCMESC Link-Tx or specified O… |
| 1.3.6.1.4.1.4253.1.18.6.1.46 | ColumnmcmescConnTxOcmDelete | read-write | mandatory | Delete a connection from MCMESC Link-Tx to an OCM CPE-Rx. If MCMESC's Link-Tx has no connection with any OCM's CPE-Rx, an error will be returned. A get on this… |
| 1.3.6.1.4.1.4253.1.18.6.1.47 | ColumnmcmescConnRxOcmShelf | read-only | mandatory | The connected OCM shelf (from MCMESC's Link Rx). |
| 1.3.6.1.4.1.4253.1.18.6.1.48 | ColumnmcmescConnRxOcmSlot | read-write | mandatory | The connected OCM slot (from MCMESC's Link Rx). |
| 1.3.6.1.4.1.4253.1.18.6.1.49 | ColumnmcmescConnRxOcmPort | read-write | mandatory | The connected OCM port (from MCMESC's Link Rx). 3=OCM's CPE-Tx, 4=OCM's Rx. Only 3 is valid. |
| 1.3.6.1.4.1.4253.1.18.6.1.50 | ColumnmcmescConnRxOcmShelfSlot | read-write | mandatory | Add a connection from MCMESC Link-Rx to an OCM CPE-Tx by specifying the OCM's shelf and slot. The format is shlef,slot. If either MCMESC Link-Tx or specified O… |
| 1.3.6.1.4.1.4253.1.18.6.1.51 | ColumnmcmescConnRxOcmDelete | read-write | mandatory | Delete a connection from MCMESC Link-Rx to an OCM CPE-Tx. If MCMESC's Link-Rx has no connection with any OCM's CPE-Tx, an error will be returned. A get on this… |
| 1.3.6.1.4.1.4253.1.18.6.1.52 | ColumnmcmescSetState | read-write | mandatory | Instruct the mcmesc card to do either a reset or loopback. A get on this will always return an other. If the card is in self-test, an error will be returned. I… |
| 1.3.6.1.4.1.4253.1.18.6.1.53 | ColumnmcmescLinkClrErrCount | read-write | mandatory | Instruct the mcmesc card to clear the bit-error count for link port. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.18.7 | ScalarmcmescPortNumber | read-only | mandatory | Number of MCMESC rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.18.8 | TablemcmescPortTable | not-accessible | mandatory | This table represents the information for each MCMESC module's port. |
| 1.3.6.1.4.1.4253.1.18.8.1 | RowmcmescPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.18.8.1.1 | ColumnmcmescPortCardLocation | read-only | mandatory | Location of the MCMESC port. Valid values are: Local in the same chassis, or remote to this chassis. |
| 1.3.6.1.4.1.4253.1.18.8.1.2 | ColumnmcmescPortCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1..2. |
| 1.3.6.1.4.1.4253.1.18.8.1.3 | ColumnmcmescPortCardSlot | read-only | mandatory | The slot within the shelf the Module is in. Valid values are: 1 to 17. |
| 1.3.6.1.4.1.4253.1.18.8.1.4 | ColumnmcmescPortIndex | read-only | mandatory | CPE port's index. Valid values are: 1 to 12. |
| 1.3.6.1.4.1.4253.1.18.8.1.5 | ColumnmcmescPortSfpSerialNum | read-only | mandatory | CPE port's SFP serial number. |
| 1.3.6.1.4.1.4253.1.18.8.1.6 | ColumnmcmescPortConnectionState | read-write | mandatory | CPE port's connection status. |
| 1.3.6.1.4.1.4253.1.18.8.1.7 | ColumnmcmescPortClrErrCount | read-write | mandatory | Instruct the mcmesc card to clear the bit-error count for a CPE port. A get on this will always return an other. |
| 1.3.6.1.4.1.4253.1.21 | NodesystemConfig | |||
| 1.3.6.1.4.1.4253.1.21.1 | ScalarsysAddCard | read-write | mandatory | Add card operation given type, shelf, slot, and optionally sub card type. The format is (type,shelf, slot[,optional]). If the fourth optional parameter is pres… |
| 1.3.6.1.4.1.4253.1.21.2 | ScalarsysAlarmCtrl | read-write | mandatory | The Master Control for Alarms. Will enable or disable all external and visual alarms of the system. The default state is enable. |
| 1.3.6.1.4.1.4253.1.21.3 | ScalarsysAlarmCritical | read-write | mandatory | Turns on or off all external critical audible and visual alarms. |
| 1.3.6.1.4.1.4253.1.21.4 | ScalarsysAlarmMajor | read-write | mandatory | Turns on or off all external major and minor audible and visual alarms. |
| 1.3.6.1.4.1.4253.1.21.5 | ScalarsysAlarmSerial | read-write | mandatory | Enables or disables the flow of TL1 alarms to the serial port. |
| 1.3.6.1.4.1.4253.1.21.6 | ScalarsysAlarmAutoCutoff | read-write | mandatory | Enables or disables the AutoCutoff feature for dry-contact alarm closures |
| 1.3.6.1.4.1.4253.1.21.7 | ScalarsysAddRoute | not-accessible | mandatory | Add route operation given local shelf, local slot, destination IP address and route Type. The format is (shelf, slot, route Type, destination IP). Different ty… |
| 1.3.6.1.4.1.4253.1.21.8 | ScalarsysDeleteRoute | not-accessible | mandatory | Delete route operation given local shelf, local slot & destination IP address . The format is (shelf, slot, destination IP). For example, to delete a route to … |
| 1.3.6.1.4.1.4253.1.21.9 | ScalarsysSwitchByPathId | read-write | mandatory | Initiate UPSR switching by Path ID. |
| 1.3.6.1.4.1.4253.1.21.10 | ScalarsysSwitchAll | read-write | mandatory | Switch all CC cards that have backup. |
| 1.3.6.1.4.1.4253.1.21.11 | ScalarsysAlarmMinor | read-write | mandatory | Turns on or off all external minor audible and visual alarms. |
| 1.3.6.1.4.1.4253.1.21.12 | ScalarsysDelCfgDb | read-write | mandatory | Action to delete configuration database. MPM would reboot after the database is deleted. A get on it will return other |
| 1.3.6.1.4.1.4253.1.21.13 | ScalarsysImnAddRoute | read-write | mandatory | Add route operation. It takes destination IP address, IP mask and the route metric. The format is (destination IP, IP mask, routeMetric). A get on this will re… |
| 1.3.6.1.4.1.4253.1.21.14 | ScalarsysImnDeleteRoute | read-write | mandatory | Delete route operation. It takes destination IP address and IP mask. The format is (destination IP, IP mask=). A get on this will return 0.0.0.0,0.0.0.0 |
| 1.3.6.1.4.1.4253.1.21.17 | TablesysExtAlarmInputTable | not-accessible | mandatory | This table represents the input information for each external alarm indicator |
| 1.3.6.1.4.1.4253.1.21.17.1 | RowsysExtAlarmInputEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.21.17.1.1 | ColumnsysExtAlarmInputId | read-only | mandatory | Id of an external alarm indicator. Valid values are: 1 to 6 |
| 1.3.6.1.4.1.4253.1.21.17.1.2 | ColumnsysExtAlarmInput | read-write | mandatory | Configurable value for an external alarm indicator. Default value is off. For the chassis with old sensor board, the value is na and is not settable. |
| 1.3.6.1.4.1.4253.1.21.17.1.3 | ColumnsysExtAlarmInputName | read-write | mandatory | User configurable name for an external alarm input indicator. For the chassis with old sensor board, the value is na and is not settable. |
| 1.3.6.1.4.1.4253.1.21.18 | ScalarsysAudioAlarm | read-write | mandatory | Mode for audio alarm. Default is off. For non-carrier-class chassis, it is na |
| 1.3.6.1.4.1.4253.1.21.19 | ScalarsysAudioAlarmSeverity | read-write | mandatory | Controls for audio alarm. When the control is set to minor, it will go off for all minor and up alarms. Default is major. For non-carrier-class chassis, it is … |
| 1.3.6.1.4.1.4253.1.21.20 | ScalarsysRdbcopy | read-write | mandatory | Forces a database copy to the standby MPM. Reading this element will always return 'other'. This element can only be set to 'copydb'. If the standby MPM is pre… |
| 1.3.6.1.4.1.4253.1.21.21 | ScalarsysRdbcopyStatus | read-only | mandatory | Displays the percentage done for forced database copies. No value is returned if a forced database copy is not in progress. |
| 1.3.6.1.4.1.4253.1.21.22 | ScalarsysSDMRequestsQueued | read-only | mandatory | Displays the number of requests in the SDM queue. |
| 1.3.6.1.4.1.4253.1.21.23 | ScalarsysModuleupdateJobsWaiting | read-only | mandatory | Displays the number of module updates jobs from the current request that must wait until one or more of the jobs progressing completes. This element will only … |
| 1.3.6.1.4.1.4253.1.21.24 | TablesysModuleupdateJobsTable | not-accessible | mandatory | This table defines the module update jobs in progress. Table entries will only be reutrned if one for more module update jobs are in progress. |
| 1.3.6.1.4.1.4253.1.21.24.1 | RowsysModuleupdateJobsEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.21.24.1.1 | ColumnsysModupdShelf | read-only | mandatory | Shelf of the module being updated. For remote updates this will be the shelf of the local module through the update occurs. |
| 1.3.6.1.4.1.4253.1.21.24.1.2 | ColumnsysModupdSlot | read-only | mandatory | Slot of the module being updated. For remote updates this will be the slot of the local module through the update occurs. |
| 1.3.6.1.4.1.4253.1.21.24.1.3 | ColumnsysModupdLocation | read-only | mandatory | Location (local or remote) of the module being updated |
| 1.3.6.1.4.1.4253.1.21.24.1.4 | ColumnsysModupdRmtStation | read-only | mandatory | Remote station of the module being updated |
| 1.3.6.1.4.1.4253.1.21.24.1.5 | ColumnsysModupdCardtype | read-only | mandatory | Type of module being updated. |
| 1.3.6.1.4.1.4253.1.21.24.1.6 | ColumnsysModupdPercentDone | read-only | mandatory | Percentage of update completed. |
| 1.3.6.1.4.1.4253.1.21.25 | ScalarsysSNMPKeepaliveEnable | read-write | mandatory | Enable or disable SNMP keep alive functionality. |
| 1.3.6.1.4.1.4253.1.21.26 | ScalarsysSNMPKeepaliveInterval | read-write | mandatory | Set the SNMP keep alive interval in minutes. |
| 1.3.6.1.4.1.4253.1.22 | Nodetopology | |||
| 1.3.6.1.4.1.4253.1.22.1 | TabletopologyTable | not-accessible | mandatory | This table represents the link topology between local and remote cards |
| 1.3.6.1.4.1.4253.1.22.1.1 | RowtopologyEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.22.1.1.1 | ColumntopologyNearEndCardShelf | read-only | mandatory | Shelf of the near end card. |
| 1.3.6.1.4.1.4253.1.22.1.1.2 | ColumntopologyNearEndCardSlot | read-write | mandatory | Slot of the near end card. Input 0 will delete the topology link. |
| 1.3.6.1.4.1.4253.1.22.1.1.3 | ColumntopologyNearEndCardPortIndex | read-only | mandatory | Near end optical link port. |
| 1.3.6.1.4.1.4253.1.22.1.1.4 | ColumntopologyNearEndCardType | read-only | mandatory | Card type of the near end card. |
| 1.3.6.1.4.1.4253.1.22.1.1.5 | ColumntopologyFarEndChassisID | read-only | mandatory | Chassis ID of the far end chassis. Part of manufacturing info |
| 1.3.6.1.4.1.4253.1.22.1.1.6 | ColumntopologyFarEndSystemName | read-only | mandatory | Name of the far end node/chassis. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.1.22.1.1.7 | ColumntopologyFarEndNodeIpAddress | read-only | mandatory | IpAddress of the far end chassis. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.1.22.1.1.8 | ColumntopologyFarEndNodeCardShelf | read-only | mandatory | Shelf of the far end module |
| 1.3.6.1.4.1.4253.1.22.1.1.9 | ColumntopologyFarEndNodeCardSlot | read-only | mandatory | Slot of the far end module |
| 1.3.6.1.4.1.4253.1.22.1.1.10 | ColumntopologyFarEndNodeCardPortIndex | read-only | mandatory | Far end optical link port. |
| 1.3.6.1.4.1.4253.1.22.1.1.11 | ColumntopologyLinkStatus | read-only | mandatory | Status of the link to indicate if active or down |
| 1.3.6.1.4.1.4253.1.22.1.1.12 | ColumntopologyFarEndNodeCardType | read-only | mandatory | Card type of the far end card. |
| 1.3.6.1.4.1.4253.1.22.2 | ScalartopologyDiscover | read-write | mandatory | An action to rediscover the complete topology A get would alway return other(1). |
| 1.3.6.1.4.1.4253.1.23 | Noderouting | |||
| 1.3.6.1.4.1.4253.1.23.1 | TableroutingTable | not-accessible | mandatory | This table represents dynamic and static routing information |
| 1.3.6.1.4.1.4253.1.23.1.1 | RowroutingEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.23.1.1.1 | ColumnrouteLocalCCShelf | not-accessible | mandatory | Shelf of the local CC card. |
| 1.3.6.1.4.1.4253.1.23.1.1.2 | ColumnrouteLocalCCSlot | not-accessible | mandatory | Slot of the local CC card. |
| 1.3.6.1.4.1.4253.1.23.1.1.3 | ColumnrouteIpDestAddress | not-accessible | mandatory | Destination IP address. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.1.23.1.1.4 | ColumnrouteDestType | not-accessible | mandatory | Destination route type. External means destination is not part of LuxN network. Internal means destination is one of the LuxN node |
| 1.3.6.1.4.1.4253.1.23.1.1.5 | ColumnrouteMode | not-accessible | mandatory | Is the route added statically(manually) or dynamically(automatic) |
| 1.3.6.1.4.1.4253.1.23.2 | TableimnDynamicRoutingTable | not-accessible | mandatory | This table represents IMN based dynamic routing information |
| 1.3.6.1.4.1.4253.1.23.2.1 | RowimnDynamicRoutingEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.23.2.1.1 | ColumnimnDynamicRouteIpDest | read-only | mandatory | Destination IP address. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.1.23.2.1.2 | ColumnimnDynamicRouteIpMask | read-only | mandatory | Destination's IP mask address. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.1.23.2.1.3 | ColumnimnDynamicRouteMetric | read-only | mandatory | Cost associated with this route. |
| 1.3.6.1.4.1.4253.1.23.2.1.4 | ColumnimnDynamicRouteNextHop | read-only | mandatory | Neighbour node of this route. |
| 1.3.6.1.4.1.4253.1.23.2.1.5 | ColumnimnDynamicRouteSysName | read-only | mandatory | Destination system name associated with route. |
| 1.3.6.1.4.1.4253.1.23.3 | ScalarimnRouteUpdateTimer | read-write | mandatory | Time in seconds for the route table to get updated/propagated Default value is 30 seconds. |
| 1.3.6.1.4.1.4253.1.23.4 | ScalarimnRouteKeepAliveTimer | read-write | mandatory | Time in seconds before neighbors enter unreachable state after communication is lost. This value has to be greater than or equal to imnRouteUpdateTimer Default… |
| 1.3.6.1.4.1.4253.1.23.5 | ScalarimnRouteUnReachableTimer | read-write | mandatory | Time in seconds before Neighbors in unreachable state are deleted from the route table. This value has to greater than or equal to imnRouteUpdateTimer Default … |
| 1.3.6.1.4.1.4253.1.23.6 | ScalarimnRouteMode | read-write | mandatory | Enable/Disable IMN functionality. Default is disabled |
| 1.3.6.1.4.1.4253.1.23.7 | TableimnStaticRoutingTable | not-accessible | mandatory | This table represents IMN based static routing information |
| 1.3.6.1.4.1.4253.1.23.7.1 | RowimnStaticRoutingEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.23.7.1.1 | ColumnimnStaticRouteIpDest | read-only | mandatory | Destination IP address. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.1.23.7.1.2 | ColumnimnStaticRouteIpMask | read-only | mandatory | Destination's IP mask address. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.1.23.7.1.3 | ColumnimnStaticRouteMetric | read-only | mandatory | Cost associated with this route. |
| 1.3.6.1.4.1.4253.1.23.8 | ScalarimnRouteMaxMetric | read-write | mandatory | Maximum acceptable metric count before the routes gets dropped. Default value is 255. Ideally this value should be greater than imnStaticRouteMetric |
| 1.3.6.1.4.1.4253.1.24 | Nodering | |||
| 1.3.6.1.4.1.4253.1.24.1 | ScalarringNum | read-only | mandatory | Total number of ring configured in the list. |
| 1.3.6.1.4.1.4253.1.24.2 | TableringTable | not-accessible | mandatory | This table represent the ring information |
| 1.3.6.1.4.1.4253.1.24.2.1 | RowringEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.24.2.1.1 | ColumnringIndex | not-accessible | mandatory | The ringIndex and also the index of the ring table. |
| 1.3.6.1.4.1.4253.1.24.2.1.2 | ColumnringID | read-write | mandatory | RingID Name for UPSR. Empty string will remove and deassociate the RingID with the PathIDs. You always has one dummy entry for adding another ring. |
| 1.3.6.1.4.1.4253.1.24.2.1.3 | ColumnringPathID1 | read-write | mandatory | PathID 1 associate with this ring. |
| 1.3.6.1.4.1.4253.1.24.2.1.4 | ColumnringPathID2 | read-write | mandatory | PathID 2 associate with this ring. |
| 1.3.6.1.4.1.4253.1.24.2.1.5 | ColumnringPath1RemoteIP | read-only | mandatory | IP Address of the neighbor node associated with path 1 |
| 1.3.6.1.4.1.4253.1.24.2.1.6 | ColumnringPath1RemoteChassisId | read-only | mandatory | Chassis ID of the neighbor node associated with path 1 |
| 1.3.6.1.4.1.4253.1.24.2.1.7 | ColumnringPath2RemoteIP | read-only | mandatory | IP Address of the neighbor node associated with path 2 |
| 1.3.6.1.4.1.4253.1.24.2.1.8 | ColumnringPath2RemoteChassisId | read-only | mandatory | Chassis ID of the neighbor node associated with path 2 |
| 1.3.6.1.4.1.4253.1.25 | Nodetap | |||
| 1.3.6.1.4.1.4253.1.25.1 | ScalartapNumber | read-only | mandatory | Number of TAP rows in the following table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.25.2 | TabletapTable | not-accessible | mandatory | This table represents the information for each TAP module |
| 1.3.6.1.4.1.4253.1.25.2.1 | RowtapEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.25.2.1.1 | ColumntapCardLocation | read-only | mandatory | Location of the module. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.1.25.2.1.2 | ColumntapCardShelf | read-only | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.1.25.2.1.3 | ColumntapCardSlot | read-write | mandatory | The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To … |
| 1.3.6.1.4.1.4253.1.25.2.1.4 | ColumntapModelNum | read-only | mandatory | Model number for module. |
| 1.3.6.1.4.1.4253.1.25.2.1.5 | ColumntapMfgDate | not-accessible | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.25.2.1.6 | ColumntapSerialNum | read-only | mandatory | Serial number of the module. |
| 1.3.6.1.4.1.4253.1.25.2.1.7 | ColumntapModelType | read-only | mandatory | Model type of the module |
| 1.3.6.1.4.1.4253.1.25.2.1.8 | ColumntapName | read-write | mandatory | User configurable name of the module |
| 1.3.6.1.4.1.4253.1.25.2.1.9 | ColumntapFWVersionID | read-only | mandatory | The current version string of the FW code |
| 1.3.6.1.4.1.4253.1.25.2.1.10 | ColumntapHWName | read-only | mandatory | Display Hardware name of the module. |
| 1.3.6.1.4.1.4253.1.25.2.1.11 | ColumntapPathID | read-write | mandatory | Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left a… |
| 1.3.6.1.4.1.4253.1.25.2.1.12 | ColumntapAdminState | read-write | mandatory | Administrative control over that TAP card. Default value is enable. When disabled, no alarms/events gets generated. |
| 1.3.6.1.4.1.4253.1.25.2.1.13 | ColumntapCleiNum | read-only | mandatory | CLEI number for the module. |
| 1.3.6.1.4.1.4253.1.25.2.1.14 | ColumntapNumPorts | read-only | mandatory | Total port numbers on each TAP card. |
| 1.3.6.1.4.1.4253.1.26 | Nodevoadm | |||
| 1.3.6.1.4.1.4253.1.26.1 | ScalarvoadmNumber | read-only | mandatory | Number of rows in the voadm table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.26.2 | TablevoadmTable | not-accessible | mandatory | This table represents the information for each VOADM card |
| 1.3.6.1.4.1.4253.1.26.2.1 | RowvoadmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.26.2.1.1 | ColumnvoadmCardLocation | read-only | mandatory | Location of the module. VOADM modules will always be seen as local modules. |
| 1.3.6.1.4.1.4253.1.26.2.1.2 | ColumnvoadmCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.26.2.1.3 | ColumnvoadmCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.26.2.1.4 | ColumnvoadmSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.26.2.1.5 | ColumnvoadmModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.26.2.1.6 | ColumnvoadmHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.26.2.1.7 | ColumnvoadmHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.26.2.1.8 | ColumnvoadmMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.26.2.1.9 | ColumnvoadmFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.26.2.1.10 | ColumnvoadmFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.26.2.1.11 | ColumnvoadmFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.26.2.1.12 | ColumnvoadmAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.26.2.1.13 | ColumnvoadmModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.26.2.1.14 | ColumnvoadmName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.26.2.1.15 | ColumnvoadmSetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.26.2.1.16 | ColumnvoadmPathID | read-write | mandatory | Path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are associated … |
| 1.3.6.1.4.1.4253.1.26.2.1.17 | ColumnvoadmCleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.26.2.1.18 | ColumnvoadmActiveChannels | read-write | mandatory | Number of active channels connected to the module. The allowed inpu range depends on the module type: MD100-5 1 to 5 MD100-10 1 to 10 |
| 1.3.6.1.4.1.4253.1.26.2.1.19 | ColumnvoadmStartItu | read-only | mandatory | First ITU channel supported by the module. |
| 1.3.6.1.4.1.4253.1.26.2.1.20 | ColumnvoadmEndItu | read-only | mandatory | Last ITU channel supported by the module. |
| 1.3.6.1.4.1.4253.1.26.2.1.21 | ColumnvoadmNumPorts | read-only | mandatory | Total port numbers on each VOADM card. |
| 1.3.6.1.4.1.4253.1.26.3 | TablevoadmPortTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.26.3.1 | RowvoadmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.26.3.1.1 | ColumnvoadmPortCardLocation | read-only | mandatory | Location of the module. VOADM modules will always be seen as local modules. |
| 1.3.6.1.4.1.4253.1.26.3.1.2 | ColumnvoadmPortCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.26.3.1.3 | ColumnvoadmPortCardSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.26.3.1.4 | ColumnvoadmPortType | read-only | mandatory | Port type for which the below values apply. |
| 1.3.6.1.4.1.4253.1.26.3.1.5 | ColumnvoadmPortMode | read-write | mandatory | Port mode. This value will not be stored in the database until the port set point is set. |
| 1.3.6.1.4.1.4253.1.26.3.1.6 | ColumnvoadmPortSetPoint | read-write | mandatory | Port set point. Valid range depends on the port mode: Fixed Attentuation 0.0 to 20.0 (dB) Fixed Power -30.0 to 15.0 (dBm) Untils are omitted when setting. |
| 1.3.6.1.4.1.4253.1.26.3.1.7 | ColumnvoadmPortMinChanInputPower | read-write | mandatory | Minimum input power for each active channel. Valid range for Mux and Demux ports is -30.0 to 15.0 dBm |
| 1.3.6.1.4.1.4253.1.26.3.1.8 | ColumnvoadmPortMinChanOutputPower | read-write | mandatory | Minimum output power for each active channel. Valid range depends on port: Mux -20.0 to 15.0 dBm Demux -30.0 to -8.0 dBm. |
| 1.3.6.1.4.1.4253.1.26.3.1.9 | ColumnvoadmPortMaxChanOutputPower | read-write | mandatory | Maximum output power for each active channel. Valid range depends on port: Mux -20.0 to 15.0 dBm Demux -30.0 to -8.0 dBm. |
| 1.3.6.1.4.1.4253.1.26.3.1.10 | ColumnvoadmPortToleranceUpperBound | read-write | mandatory | Upper bound for allowable power/attenuation error. Valid range is 0.2 to 10.0 dB. |
| 1.3.6.1.4.1.4253.1.26.3.1.11 | ColumnvoadmPortToleranceLowerBound | read-write | mandatory | Lower bound for allowable power/attenuation error. Valid range is 0.2 to 10.0 dB. |
| 1.3.6.1.4.1.4253.1.26.3.1.12 | ColumnvoadmPortTotalInputPower | read-only | mandatory | Power reading from input detector. Valid range: -30 to 15 dBm |
| 1.3.6.1.4.1.4253.1.26.3.1.13 | ColumnvoadmPortPerChanInputPower | read-only | mandatory | Total input power divided by number of active channels. Valid range: -30 to 15 dBm |
| 1.3.6.1.4.1.4253.1.26.3.1.14 | ColumnvoadmPortTotalOutputPower | read-only | mandatory | Power reading from output detector. Valid range: -30 to 15 dBm |
| 1.3.6.1.4.1.4253.1.26.3.1.15 | ColumnvoadmPortPerChanOutputPower | read-only | mandatory | Total output power divided by number of active channels. Valid range: -30 to 15 dBm |
| 1.3.6.1.4.1.4253.1.26.3.1.16 | ColumnvoadmPortMeasuredAtten | read-only | mandatory | Difference between total input power and total output power. |
| 1.3.6.1.4.1.4253.1.26.3.1.17 | ColumnvoadmPortAvgInsertLoss | read-only | mandatory | Average insertion loss for ports. |
| 1.3.6.1.4.1.4253.1.26.3.1.18 | ColumnvoadmPortAvgExpressLoss | read-only | mandatory | Average express los for ports. |
| 1.3.6.1.4.1.4253.1.27 | NodezmsConfigSync | |||
| 1.3.6.1.4.1.4253.1.27.1 | ScalarzmsConfigSyncExists | read-only | current | Indicates whether or not there exists records to be sent to the ZMS config synch manager for changes that have been made by CLI/HTTP to the data base. |
| 1.3.6.1.4.1.4253.1.27.2 | ScalarzmsConfigSyncOverflow | read-only | current | Indicates whether or not the device had to discard update data base records due to resource constraints. If TRUE, traps will be sent to the ZMS Config Synch Ma… |
| 1.3.6.1.4.1.4253.1.27.3 | ScalarzmsConfigSyncPriority | read-only | current | Indicates the highest priority configuration synchronization trap outstanding. This flag is set to none at boot time and whenever a file of synchronization cha… |
| 1.3.6.1.4.1.4253.1.27.4 | ScalarzmsConfigSyncAction | read-write | current | Used by ZMS when it wants to create a list of config synch records. It must first write the filename expected and then set the action. The create list action a… |
| 1.3.6.1.4.1.4253.1.27.5 | ScalarzmsConfigSyncFileName | read-write | current | File Name to be used when creating the config synch records. |
| 1.3.6.1.4.1.4253.1.27.6 | ScalarzmsConfigSyncStatus | read-only | current | Used by Config Sync Acgent when processing a request to create a list of config synch records. |
| 1.3.6.1.4.1.4253.1.27.7 | ScalarzmsConfigSyncUserName | read-write | current | User Name to be used when sending the config synch records. When read, the last user name is returned. |
| 1.3.6.1.4.1.4253.1.27.8 | ScalarzmsConfigSyncUserPassword | read-write | current | Password to be used when sending the config synch records. For use in FTP authentication. When read, always returns the NULL string |
| 1.3.6.1.4.1.4253.1.27.9 | ScalarzmsIpAddress | read-write | current | This is the ZMS IP address for which configuration synchronization messages and any other special handling is performed. |
| 1.3.6.1.4.1.4253.1.28 | Nodedmm | |||
| 1.3.6.1.4.1.4253.1.28.1 | ScalardmmNumber | read-only | mandatory | Number of rows in the dmm table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.28.2 | TabledmmTable | not-accessible | mandatory | This table represents the information for each DMM card |
| 1.3.6.1.4.1.4253.1.28.2.1 | RowdmmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.28.2.1.1 | ColumndmmCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.28.2.1.2 | ColumndmmCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.28.2.1.3 | ColumndmmCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.28.2.1.4 | ColumndmmSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.28.2.1.5 | ColumndmmModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.28.2.1.6 | ColumndmmHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.28.2.1.7 | ColumndmmHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.28.2.1.8 | ColumndmmMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.28.2.1.9 | ColumndmmFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.28.2.1.10 | ColumndmmFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.28.2.1.11 | ColumndmmFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.28.2.1.12 | ColumndmmAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.28.2.1.13 | ColumndmmModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.28.2.1.14 | ColumndmmName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.28.2.1.15 | ColumndmmSetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.28.2.1.16 | ColumndmmPathID | read-write | mandatory | Path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are associated … |
| 1.3.6.1.4.1.4253.1.28.2.1.17 | ColumndmmLinkName | read-write | mandatory | Link name for fiber between the local and the remote card. |
| 1.3.6.1.4.1.4253.1.28.2.1.18 | ColumndmmCleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.28.2.1.19 | ColumndmmNumPorts | read-only | mandatory | Total port numbers on each DMM card. |
| 1.3.6.1.4.1.4253.1.28.2.1.20 | ColumndmmFpgaRev | read-only | mandatory | FPGA revision for the module. |
| 1.3.6.1.4.1.4253.1.28.3 | TabledmmPortTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.28.3.1 | RowdmmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.28.3.1.1 | ColumndmmPortLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.28.3.1.2 | ColumndmmPortShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.28.3.1.3 | ColumndmmPortSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.28.3.1.4 | ColumndmmPortIndex | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.28.3.1.5 | ColumndmmPortLineRate | read-write | mandatory | Port line rate. Valid only for ports 1 and 2. |
| 1.3.6.1.4.1.4253.1.28.3.1.6 | ColumndmmPortAutoDisable | read-write | mandatory | Flag to enable/disable the CPE link when a fault is detected. Far end CPE disable is identical to normal CPE disable with the added feature that the local CPE … |
| 1.3.6.1.4.1.4253.1.28.3.1.7 | ColumndmmPortMode | read-only | mandatory | Port mode. |
| 1.3.6.1.4.1.4253.1.28.3.1.8 | ColumndmmPortItu | read-only | mandatory | Port ITU number. The ITU number is determined from the SFP wavelength. |
| 1.3.6.1.4.1.4253.1.28.3.1.9 | ColumndmmPortWavelength | read-only | mandatory | Wavelength from port SFP. |
| 1.3.6.1.4.1.4253.1.28.3.1.10 | ColumndmmPortRxPower | read-only | mandatory | Receive power reported by port SFP. |
| 1.3.6.1.4.1.4253.1.28.3.1.11 | ColumndmmPortTxState | read-only | mandatory | State of port SFP transmitter. |
| 1.3.6.1.4.1.4253.1.28.3.1.12 | ColumndmmPortTxReach | read-only | mandatory | Optical reach in meters reported by port SFP. |
| 1.3.6.1.4.1.4253.1.28.3.1.13 | ColumndmmPortSfpSerialNumber | read-only | mandatory | Port SFP serial number. |
| 1.3.6.1.4.1.4253.1.28.3.1.14 | ColumndmmPortSfpConnectorType | read-only | mandatory | Port SFP connector type. |
| 1.3.6.1.4.1.4253.1.28.4 | TabledmmConnTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.28.4.1 | RowdmmConnEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.28.4.1.1 | ColumndmmConnCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.28.4.1.2 | ColumndmmConnCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.28.4.1.3 | ColumndmmConnCardSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.28.4.1.4 | ColumndmmConnCardPortType | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.28.4.1.5 | ColumndmmConnCardType | read-only | mandatory | Module type connected to port. |
| 1.3.6.1.4.1.4253.1.28.4.1.6 | ColumndmmConnLocation | read-only | mandatory | The chassis location of the card connected to this port. |
| 1.3.6.1.4.1.4253.1.28.4.1.7 | ColumndmmConnShelf | read-only | mandatory | The shelf of the card connected to this port |
| 1.3.6.1.4.1.4253.1.28.4.1.8 | ColumndmmConnSlot | read-only | mandatory | The slot of the card connected to this port |
| 1.3.6.1.4.1.4253.1.28.4.1.9 | ColumndmmConnPort | read-only | mandatory | Conn port for the DMM's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B… |
| 1.3.6.1.4.1.4253.1.29 | Nodeocm10gf | |||
| 1.3.6.1.4.1.4253.1.29.1 | Scalarocm10gfNumber | read-only | mandatory | Number of rows in the ocm10gf table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.29.2 | Tableocm10gfTable | not-accessible | mandatory | This table represents the information for each OCM10GF card |
| 1.3.6.1.4.1.4253.1.29.2.1 | Rowocm10gfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.29.2.1.1 | Columnocm10gfCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.29.2.1.2 | Columnocm10gfCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.29.2.1.3 | Columnocm10gfCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.29.2.1.4 | Columnocm10gfSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.29.2.1.5 | Columnocm10gfModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.29.2.1.6 | Columnocm10gfHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.29.2.1.7 | Columnocm10gfHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.29.2.1.8 | Columnocm10gfMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.29.2.1.9 | Columnocm10gfFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.29.2.1.10 | Columnocm10gfFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.29.2.1.11 | Columnocm10gfFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.29.2.1.12 | Columnocm10gfModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.29.2.1.13 | Columnocm10gfName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.29.2.1.14 | Columnocm10gfLineRate | read-write | mandatory | Port line rate. Valid only for ports 1 and 2. |
| 1.3.6.1.4.1.4253.1.29.2.1.15 | Columnocm10gfAutoDisable | read-write | mandatory | Flag to enable/disable the CPE link when a fault is detected. Far end CPE disable is identical to normal CPE disable with the added feature that the local CPE … |
| 1.3.6.1.4.1.4253.1.29.2.1.16 | Columnocm10gfLinkName | read-write | mandatory | Link name for fiber between the local and the remote card. |
| 1.3.6.1.4.1.4253.1.29.2.1.17 | Columnocm10gfPathID | read-write | mandatory | Path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are associated … |
| 1.3.6.1.4.1.4253.1.29.2.1.18 | Columnocm10gfAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.29.2.1.19 | Columnocm10gfSetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.29.2.1.20 | Columnocm10gfCleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.29.2.1.21 | Columnocm10gfNumPorts | read-only | mandatory | Total port numbers on each OCM10GF card. |
| 1.3.6.1.4.1.4253.1.29.2.1.22 | Columnocm10gfFpgaRev | read-only | mandatory | FPGA revision for the module. |
| 1.3.6.1.4.1.4253.1.29.3 | Tableocm10gfPortTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.29.3.1 | Rowocm10gfPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.29.3.1.1 | Columnocm10gfPortLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.29.3.1.2 | Columnocm10gfPortShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.29.3.1.3 | Columnocm10gfPortSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.29.3.1.4 | Columnocm10gfPortIndex | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.29.3.1.5 | Columnocm10gfPortMode | read-only | mandatory | Port mode. |
| 1.3.6.1.4.1.4253.1.29.3.1.6 | Columnocm10gfPortWavelength | read-only | mandatory | Wavelength from port SFP. |
| 1.3.6.1.4.1.4253.1.29.3.1.7 | Columnocm10gfPortRxPower | read-only | mandatory | Receive power reported by port SFP. |
| 1.3.6.1.4.1.4253.1.29.3.1.8 | Columnocm10gfPortTxState | read-only | mandatory | State of port SFP transmitter. |
| 1.3.6.1.4.1.4253.1.29.3.1.9 | Columnocm10gfPortTxReach | read-only | mandatory | Optical reach in meters reported by port SFP. |
| 1.3.6.1.4.1.4253.1.29.3.1.10 | Columnocm10gfPortXfpSerialNumber | read-only | mandatory | Port SFP serial number. |
| 1.3.6.1.4.1.4253.1.29.4 | Tableocm10gfConnTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.29.4.1 | Rowocm10gfConnEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.29.4.1.1 | Columnocm10gfConnCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.29.4.1.2 | Columnocm10gfConnCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.29.4.1.3 | Columnocm10gfConnCardSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.29.4.1.4 | Columnocm10gfConnCardPortType | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.29.4.1.5 | Columnocm10gfConnCardType | read-only | mandatory | Module type connected to port. |
| 1.3.6.1.4.1.4253.1.29.4.1.6 | Columnocm10gfConnLocation | read-only | mandatory | The chassis location of the card connected to this port. |
| 1.3.6.1.4.1.4253.1.29.4.1.7 | Columnocm10gfConnShelf | read-only | mandatory | The shelf of the card connected to this port |
| 1.3.6.1.4.1.4253.1.29.4.1.8 | Columnocm10gfConnSlot | read-only | mandatory | The slot of the card connected to this port |
| 1.3.6.1.4.1.4253.1.29.4.1.9 | Columnocm10gfConnPort | read-only | mandatory | Conn port for the OCM10GF's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Co… |
| 1.3.6.1.4.1.4253.1.30 | Nodeocm2 | |||
| 1.3.6.1.4.1.4253.1.30.1 | Scalarocm2Number | read-only | mandatory | Number of rows in the ocm2 table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.30.2 | Tableocm2Table | not-accessible | mandatory | This table represents the information for each OCM2 card |
| 1.3.6.1.4.1.4253.1.30.2.1 | Rowocm2Entry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.30.2.1.1 | Columnocm2CardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.30.2.1.2 | Columnocm2CardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.30.2.1.3 | Columnocm2CardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.30.2.1.4 | Columnocm2SerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.30.2.1.5 | Columnocm2ModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.30.2.1.6 | Columnocm2HwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.30.2.1.7 | Columnocm2HwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.30.2.1.8 | Columnocm2MfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.30.2.1.9 | Columnocm2FwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.30.2.1.10 | Columnocm2FwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.30.2.1.11 | Columnocm2FwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.30.2.1.12 | Columnocm2ModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.30.2.1.13 | Columnocm2Name | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.30.2.1.14 | Columnocm2Link1LineRate | read-write | mandatory | Link 1 line rate. |
| 1.3.6.1.4.1.4253.1.30.2.1.15 | Columnocm2Link1AutoDisable | read-write | mandatory | Flag to enable/disable automatic CPE disable for Link 1. |
| 1.3.6.1.4.1.4253.1.30.2.1.16 | Columnocm2Link1LinkName | read-write | mandatory | Link 1 link name for fiber between the local and the remote card. |
| 1.3.6.1.4.1.4253.1.30.2.1.17 | Columnocm2Link1PathID | read-write | mandatory | Link 1 path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are asso… |
| 1.3.6.1.4.1.4253.1.30.2.1.18 | Columnocm2Link2LineRate | read-write | mandatory | Link 2 line rate. |
| 1.3.6.1.4.1.4253.1.30.2.1.19 | Columnocm2Link2AutoDisable | read-write | mandatory | Flag to enable/disable automatic CPE disable for Link 2. |
| 1.3.6.1.4.1.4253.1.30.2.1.20 | Columnocm2Link2LinkName | read-write | mandatory | Link 2 link name for fiber between the local and the remote card. |
| 1.3.6.1.4.1.4253.1.30.2.1.21 | Columnocm2Link2PathID | read-write | mandatory | Link 2 path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are asso… |
| 1.3.6.1.4.1.4253.1.30.2.1.22 | Columnocm2AdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.30.2.1.23 | Columnocm2SetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.30.2.1.24 | Columnocm2CleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.30.2.1.25 | Columnocm2NumPorts | read-only | mandatory | Total port numbers on each OCM2 card. |
| 1.3.6.1.4.1.4253.1.30.2.1.26 | Columnocm2RegenMode | read-write | mandatory | Set or clear OCM2 regen mode. |
| 1.3.6.1.4.1.4253.1.30.2.1.27 | Columnocm2FpgaRev | read-only | mandatory | FPGA revision for the module. |
| 1.3.6.1.4.1.4253.1.30.3 | Tableocm2PortTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.30.3.1 | Rowocm2PortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.30.3.1.1 | Columnocm2PortLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.30.3.1.2 | Columnocm2PortShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.30.3.1.3 | Columnocm2PortSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.30.3.1.4 | Columnocm2PortIndex | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.30.3.1.5 | Columnocm2PortMode | read-only | mandatory | Port mode. |
| 1.3.6.1.4.1.4253.1.30.3.1.6 | Columnocm2PortItu | read-only | mandatory | Port ITU number. The ITU number is determined from the SFP wavelength. |
| 1.3.6.1.4.1.4253.1.30.3.1.7 | Columnocm2PortWavelength | read-only | mandatory | Wavelength from port SFP. |
| 1.3.6.1.4.1.4253.1.30.3.1.8 | Columnocm2PortRxPower | read-only | mandatory | Receive power reported by port SFP. |
| 1.3.6.1.4.1.4253.1.30.3.1.9 | Columnocm2PortTxState | read-only | mandatory | State of port SFP transmitter. |
| 1.3.6.1.4.1.4253.1.30.3.1.10 | Columnocm2PortTxReach | read-only | mandatory | Optical reach in meters reported by port SFP. |
| 1.3.6.1.4.1.4253.1.30.3.1.11 | Columnocm2PortSfpSerialNumber | read-only | mandatory | Port SFP serial number. |
| 1.3.6.1.4.1.4253.1.30.4 | Tableocm2ConnTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.30.4.1 | Rowocm2ConnEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.30.4.1.1 | Columnocm2ConnCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.30.4.1.2 | Columnocm2ConnCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.30.4.1.3 | Columnocm2ConnCardSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.30.4.1.4 | Columnocm2ConnCardPortType | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.30.4.1.5 | Columnocm2ConnCardType | read-only | mandatory | Module type connected to port. |
| 1.3.6.1.4.1.4253.1.30.4.1.6 | Columnocm2ConnLocation | read-only | mandatory | The chassis location of the card connected to this port. |
| 1.3.6.1.4.1.4253.1.30.4.1.7 | Columnocm2ConnShelf | read-only | mandatory | The shelf of the card connected to this port |
| 1.3.6.1.4.1.4253.1.30.4.1.8 | Columnocm2ConnSlot | read-only | mandatory | The slot of the card connected to this port |
| 1.3.6.1.4.1.4253.1.30.4.1.9 | Columnocm2ConnPort | read-only | mandatory | Conn port for the OCM2's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn … |
| 1.3.6.1.4.1.4253.1.31 | Nodeosc | |||
| 1.3.6.1.4.1.4253.1.31.1 | ScalaroscNumber | read-only | mandatory | Number of rows in the osc table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.31.2 | TableoscTable | not-accessible | mandatory | This table represents the information for each OSC card |
| 1.3.6.1.4.1.4253.1.31.2.1 | RowoscEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.31.2.1.1 | ColumnoscCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.31.2.1.2 | ColumnoscCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.31.2.1.3 | ColumnoscCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.31.2.1.4 | ColumnoscSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.31.2.1.5 | ColumnoscModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.31.2.1.6 | ColumnoscHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.31.2.1.7 | ColumnoscHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.31.2.1.8 | ColumnoscMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.31.2.1.9 | ColumnoscFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.31.2.1.10 | ColumnoscFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.31.2.1.11 | ColumnoscFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.31.2.1.12 | ColumnoscAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.31.2.1.13 | ColumnoscModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.31.2.1.14 | ColumnoscName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.31.2.1.15 | ColumnoscPathID | read-write | mandatory | Path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are associated … |
| 1.3.6.1.4.1.4253.1.31.2.1.16 | ColumnoscSetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.31.2.1.17 | ColumnoscCleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.31.2.1.18 | ColumnoscNumPorts | read-only | mandatory | Total port numbers on each OSC card. |
| 1.3.6.1.4.1.4253.1.31.2.1.19 | ColumnoscFpgaRev | read-only | mandatory | FPGA revision for the module. |
| 1.3.6.1.4.1.4253.1.31.3 | TableoscPortTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.31.3.1 | RowoscPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.31.3.1.1 | ColumnoscPortLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.31.3.1.2 | ColumnoscPortShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.31.3.1.3 | ColumnoscPortSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.31.3.1.4 | ColumnoscPortIndex | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.31.3.1.5 | ColumnoscPortItu | read-only | mandatory | Port ITU number. The ITU number is determined from the SFP wavelength. |
| 1.3.6.1.4.1.4253.1.31.3.1.6 | ColumnoscPortWavelength | read-only | mandatory | Wavelength from port SFP. |
| 1.3.6.1.4.1.4253.1.31.3.1.7 | ColumnoscPortRxPower | read-only | mandatory | Receive power reported by port SFP. |
| 1.3.6.1.4.1.4253.1.31.3.1.8 | ColumnoscPortTxState | read-only | mandatory | State of port SFP transmitter. |
| 1.3.6.1.4.1.4253.1.31.3.1.9 | ColumnoscPortTxReach | read-only | mandatory | Optical reach in meters reported by port SFP. |
| 1.3.6.1.4.1.4253.1.31.3.1.10 | ColumnoscPortSfpSerialNumber | read-only | mandatory | Port SFP serial number. |
| 1.3.6.1.4.1.4253.1.32 | Nodeocm4g | |||
| 1.3.6.1.4.1.4253.1.32.1 | Scalarocm4gNumber | read-only | mandatory | Number of rows in the ocm4g table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.32.2 | Tableocm4gTable | not-accessible | mandatory | This table represents the information for each OCM4G card |
| 1.3.6.1.4.1.4253.1.32.2.1 | Rowocm4gEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.32.2.1.1 | Columnocm4gCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.32.2.1.2 | Columnocm4gCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.32.2.1.3 | Columnocm4gCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.32.2.1.4 | Columnocm4gSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.32.2.1.5 | Columnocm4gModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.32.2.1.6 | Columnocm4gHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.32.2.1.7 | Columnocm4gHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.32.2.1.8 | Columnocm4gMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.32.2.1.9 | Columnocm4gFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.32.2.1.10 | Columnocm4gFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.32.2.1.11 | Columnocm4gFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.32.2.1.12 | Columnocm4gModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.32.2.1.13 | Columnocm4gName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.32.2.1.14 | Columnocm4gLink1LineRate | read-write | mandatory | Link 1 line rate. |
| 1.3.6.1.4.1.4253.1.32.2.1.15 | Columnocm4gLink1AutoDisable | read-write | mandatory | Flag to enable/disable automatic CPE disable for Link 1. |
| 1.3.6.1.4.1.4253.1.32.2.1.16 | Columnocm4gLink1LinkName | read-write | mandatory | Link 1 link name for fiber between the local and the remote card. |
| 1.3.6.1.4.1.4253.1.32.2.1.17 | Columnocm4gLink1PathID | read-write | mandatory | Link 1 path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are asso… |
| 1.3.6.1.4.1.4253.1.32.2.1.18 | Columnocm4gLink2LineRate | read-write | mandatory | Link 2 line rate. |
| 1.3.6.1.4.1.4253.1.32.2.1.19 | Columnocm4gLink2AutoDisable | read-write | mandatory | Flag to enable/disable automatic CPE disable for Link 2. |
| 1.3.6.1.4.1.4253.1.32.2.1.20 | Columnocm4gLink2LinkName | read-write | mandatory | Link 2 link name for fiber between the local and the remote card. |
| 1.3.6.1.4.1.4253.1.32.2.1.21 | Columnocm4gLink2PathID | read-write | mandatory | Link 2 path ID name associated with the module. Set input equal to NULL will remove the card off the path and also remove the path if no other modules are asso… |
| 1.3.6.1.4.1.4253.1.32.2.1.22 | Columnocm4gAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.32.2.1.23 | Columnocm4gSetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.32.2.1.24 | Columnocm4gCleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.32.2.1.25 | Columnocm4gNumPorts | read-only | mandatory | Total port numbers on each OCM4G card. |
| 1.3.6.1.4.1.4253.1.32.2.1.26 | Columnocm4gFpgaRev | read-only | mandatory | FPGA revision for the module. |
| 1.3.6.1.4.1.4253.1.32.3 | Tableocm4gPortTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.32.3.1 | Rowocm4gPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.32.3.1.1 | Columnocm4gPortLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.32.3.1.2 | Columnocm4gPortShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.32.3.1.3 | Columnocm4gPortSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.32.3.1.4 | Columnocm4gPortIndex | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.32.3.1.5 | Columnocm4gPortMode | read-only | mandatory | Port mode. |
| 1.3.6.1.4.1.4253.1.32.3.1.6 | Columnocm4gPortItu | read-only | mandatory | Port ITU number. The ITU number is determined from the SFP wavelength. |
| 1.3.6.1.4.1.4253.1.32.3.1.7 | Columnocm4gPortWavelength | read-only | mandatory | Wavelength from port SFP. |
| 1.3.6.1.4.1.4253.1.32.3.1.8 | Columnocm4gPortRxPower | read-only | mandatory | Receive power reported by port SFP. |
| 1.3.6.1.4.1.4253.1.32.3.1.9 | Columnocm4gPortTxState | read-only | mandatory | State of port SFP transmitter. |
| 1.3.6.1.4.1.4253.1.32.3.1.10 | Columnocm4gPortTxReach | read-only | mandatory | Optical reach in meters reported by port SFP. |
| 1.3.6.1.4.1.4253.1.32.3.1.11 | Columnocm4gPortSfpSerialNumber | read-only | mandatory | Port SFP serial number. |
| 1.3.6.1.4.1.4253.1.32.4 | Tableocm4gConnTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.32.4.1 | Rowocm4gConnEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.32.4.1.1 | Columnocm4gConnCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.32.4.1.2 | Columnocm4gConnCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.32.4.1.3 | Columnocm4gConnCardSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.32.4.1.4 | Columnocm4gConnCardPortType | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.32.4.1.5 | Columnocm4gConnCardType | read-only | mandatory | Module type connected to port. |
| 1.3.6.1.4.1.4253.1.32.4.1.6 | Columnocm4gConnLocation | read-only | mandatory | The chassis location of the card connected to this port. |
| 1.3.6.1.4.1.4253.1.32.4.1.7 | Columnocm4gConnShelf | read-only | mandatory | The shelf of the card connected to this port |
| 1.3.6.1.4.1.4253.1.32.4.1.8 | Columnocm4gConnSlot | read-only | mandatory | The slot of the card connected to this port |
| 1.3.6.1.4.1.4253.1.32.4.1.9 | Columnocm4gConnPort | read-only | mandatory | Conn port for the OCM4G's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn… |
| 1.3.6.1.4.1.4253.1.33 | Nodeoet | |||
| 1.3.6.1.4.1.4253.1.33.1 | ScalaroetNumber | read-only | mandatory | Number of rows in the oet table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.33.2 | TableoetTable | not-accessible | mandatory | This table represents the information for each OET card |
| 1.3.6.1.4.1.4253.1.33.2.1 | RowoetEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.33.2.1.1 | ColumnoetCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.33.2.1.2 | ColumnoetCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.33.2.1.3 | ColumnoetCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.33.2.1.4 | ColumnoetSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.33.2.1.5 | ColumnoetModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.33.2.1.6 | ColumnoetHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.33.2.1.7 | ColumnoetHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.33.2.1.8 | ColumnoetMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.33.2.1.9 | ColumnoetFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.33.2.1.10 | ColumnoetFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.33.2.1.11 | ColumnoetFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.33.2.1.12 | ColumnoetModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.33.2.1.13 | ColumnoetName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.33.2.1.14 | ColumnoetCleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.33.2.1.15 | ColumnoetFpgaRevMB | read-only | mandatory | FPGA revision for the module's mother board. |
| 1.3.6.1.4.1.4253.1.33.2.1.16 | ColumnoetFpgaRevDB | read-only | mandatory | FPGA revision for the module's daughter board. |
| 1.3.6.1.4.1.4253.1.33.2.1.17 | ColumnoetCpldRev | read-only | mandatory | CPLD revision for the module. |
| 1.3.6.1.4.1.4253.1.33.2.1.18 | ColumnoetOpMode | read-write | mandatory | Operating Mode (1=Mux Mode, 2=Switch Mode). |
| 1.3.6.1.4.1.4253.1.33.2.1.19 | ColumnoetProtMode | read-write | mandatory | Mux Protection. |
| 1.3.6.1.4.1.4253.1.33.2.1.20 | ColumnoetEAPSMode | read-write | mandatory | Ethernet Automatic Protection Switching. |
| 1.3.6.1.4.1.4253.1.33.2.1.21 | ColumnoetAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.33.2.1.22 | ColumnoetSetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.33.2.1.23 | ColumnoetConfigInProgress | read-only | mandatory | Configured changes are pending, Apply Changes required to finish. |
| 1.3.6.1.4.1.4253.1.33.2.1.24 | ColumnoetApplyChanges | read-write | mandatory | Update device with pending configuration changes. Read returns 'na'. |
| 1.3.6.1.4.1.4253.1.33.3 | TableoetLinkTable | not-accessible | mandatory | This table represents the information for each of the Link ports on the module. |
| 1.3.6.1.4.1.4253.1.33.3.1 | RowoetLinkEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.33.3.1.1 | ColumnoetLinkLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.33.3.1.2 | ColumnoetLinkShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.33.3.1.3 | ColumnoetLinkSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.33.3.1.4 | ColumnoetLinkIndex | read-only | mandatory | Link for which the below values apply. |
| 1.3.6.1.4.1.4253.1.33.3.1.5 | ColumnoetLinkEnable | read-write | mandatory | Enables or disables the link. |
| 1.3.6.1.4.1.4253.1.33.3.1.6 | ColumnoetLinkProtocol | read-write | mandatory | Protocol. |
| 1.3.6.1.4.1.4253.1.33.3.1.7 | ColumnoetLinkName | read-write | mandatory | Link name for fiber between the local and the remote card. |
| 1.3.6.1.4.1.4253.1.33.3.1.8 | ColumnoetLinkVlanIds | read-write | mandatory | Comma List of VLAN Ids - single and ranges. |
| 1.3.6.1.4.1.4253.1.33.3.1.9 | ColumnoetLinkConfigInProgress | read-only | mandatory | Configured changes are pending, Apply Changes required to finish. |
| 1.3.6.1.4.1.4253.1.33.3.1.10 | ColumnoetLinkApplyChanges | read-write | mandatory | Update device with pending configuration changes. Read returns 'na'. |
| 1.3.6.1.4.1.4253.1.33.3.1.11 | ColumnoetLinkMode | read-only | mandatory | Link mode. |
| 1.3.6.1.4.1.4253.1.33.3.1.12 | ColumnoetLinkItu | read-only | mandatory | Link ITU number. The ITU number is determined from the XFP wavelength. |
| 1.3.6.1.4.1.4253.1.33.3.1.13 | ColumnoetLinkWavelength | read-only | mandatory | Wavelength from Link XFP. |
| 1.3.6.1.4.1.4253.1.33.3.1.14 | ColumnoetLinkRxPower | read-only | mandatory | Receive power reported by Link XFP. |
| 1.3.6.1.4.1.4253.1.33.3.1.15 | ColumnoetLinkTxState | read-only | mandatory | State of Link XFP transmitter. |
| 1.3.6.1.4.1.4253.1.33.3.1.16 | ColumnoetLinkTxReach | read-only | mandatory | Optical reach in meters reported by Link XFP. |
| 1.3.6.1.4.1.4253.1.33.3.1.17 | ColumnoetLinkXfpSerialNumber | read-only | mandatory | Link XFP serial number. |
| 1.3.6.1.4.1.4253.1.33.4 | TableoetPortTable | not-accessible | mandatory | This table represents the information for each of the CPE ports on the module. |
| 1.3.6.1.4.1.4253.1.33.4.1 | RowoetPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.33.4.1.1 | ColumnoetPortLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.33.4.1.2 | ColumnoetPortShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.33.4.1.3 | ColumnoetPortSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.33.4.1.4 | ColumnoetPortIndex | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.33.4.1.5 | ColumnoetPortEnable | read-write | mandatory | Enables or disables the port. |
| 1.3.6.1.4.1.4253.1.33.4.1.6 | ColumnoetPortALSD | read-write | mandatory | Auto Laser Shutoff |
| 1.3.6.1.4.1.4253.1.33.4.1.7 | ColumnoetPortFlowControl | read-write | mandatory | Enable or disable the port's flow control. |
| 1.3.6.1.4.1.4253.1.33.4.1.8 | ColumnoetPortVlanId | read-write | mandatory | Network ID must be between 1 to 200. |
| 1.3.6.1.4.1.4253.1.33.4.1.9 | ColumnoetPortName | read-write | mandatory | Port name. |
| 1.3.6.1.4.1.4253.1.33.4.1.10 | ColumnoetPortConfigInProgress | read-only | mandatory | Configured changes are pending, Apply Changes required to finish. |
| 1.3.6.1.4.1.4253.1.33.4.1.11 | ColumnoetPortApplyChanges | read-write | mandatory | Update device with pending configuration changes. Read returns 'na'. |
| 1.3.6.1.4.1.4253.1.33.4.1.12 | ColumnoetPortMode | read-only | mandatory | Port mode. |
| 1.3.6.1.4.1.4253.1.33.4.1.13 | ColumnoetPortItu | read-only | mandatory | Port ITU number. The ITU number is determined from the SFP wavelength. |
| 1.3.6.1.4.1.4253.1.33.4.1.14 | ColumnoetPortWavelength | read-only | mandatory | Wavelength from Port SFP. |
| 1.3.6.1.4.1.4253.1.33.4.1.15 | ColumnoetPortRxPower | read-only | mandatory | Receive power reported by Port SFP. |
| 1.3.6.1.4.1.4253.1.33.4.1.16 | ColumnoetPortTxState | read-only | mandatory | State of Port SFP transmitter. |
| 1.3.6.1.4.1.4253.1.33.4.1.17 | ColumnoetPortTxReach | read-only | mandatory | Optical reach in meters reported by Port SFP. |
| 1.3.6.1.4.1.4253.1.33.4.1.18 | ColumnoetPortSfpSerialNumber | read-only | mandatory | Port SFP serial number. |
| 1.3.6.1.4.1.4253.1.34 | Nodeuob | |||
| 1.3.6.1.4.1.4253.1.34.1 | ScalaruobNumber | read-only | mandatory | Number of rows in the uob table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.34.2 | TableuobTable | not-accessible | mandatory | This table represents the information for each UOB card |
| 1.3.6.1.4.1.4253.1.34.2.1 | RowuobEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.34.2.1.1 | ColumnuobCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.34.2.1.2 | ColumnuobCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.34.2.1.3 | ColumnuobCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.34.2.1.4 | ColumnuobSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.34.2.1.5 | ColumnuobModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.34.2.1.6 | ColumnuobHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.34.2.1.7 | ColumnuobHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.34.2.1.8 | ColumnuobMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.34.2.1.9 | ColumnuobFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.34.2.1.10 | ColumnuobFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.34.2.1.11 | ColumnuobFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.34.2.1.12 | ColumnuobModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.34.2.1.13 | ColumnuobCfgName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.34.2.1.14 | ColumnuobModuleName | read-only | mandatory | name of the module. |
| 1.3.6.1.4.1.4253.1.34.2.1.15 | ColumnuobAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.34.2.1.16 | ColumnuobSetState | read-write | mandatory | Instruct the module to do a warmboot. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.34.2.1.17 | ColumnuobCleiNum | read-only | mandatory | CLEI number of the module. |
| 1.3.6.1.4.1.4253.1.34.2.1.18 | ColumnuobFpgaRev | read-only | mandatory | FPGA revision for the module. |
| 1.3.6.1.4.1.4253.1.34.2.1.19 | ColumnuobOperationMode | read-write | mandatory | Invalid, Constain Power, Constant Gain, Disabled. Constain Power(1) is not valid on Fixed modules. |
| 1.3.6.1.4.1.4253.1.34.2.1.20 | ColumnuobOutPower | read-write | mandatory | uobModuleName - Configured Power in dBm T17VO - range: -13.0 to 17.5 T17VR - range: -13.0 to 17.5 T20FR - range: -7.0 to 20.10 T15FR - range: -7.0 to 15.10 |
| 1.3.6.1.4.1.4253.1.34.2.1.21 | ColumnuobGain | read-write | mandatory | uobModuleName - Configured Gain in dB T17VO - range: 10.0 to 20.0 T17VR - range: 10.0 to 20.0 T20FR - range: 16.0 to 28.0 default:22 T15FR - range: 16.0 to 28.… |
| 1.3.6.1.4.1.4253.1.34.2.1.22 | ColumnuobGainTilt | read-write | mandatory | uobModuleName - Configured Gain Tilt in dB T17VO - range: -2.0 to 2.0 T17VR - range: -2.0 to 2.0 |
| 1.3.6.1.4.1.4253.1.34.2.1.23 | ColumnuobLosMode | read-write | mandatory | No effect, Disabled in all modes, Disabled in Power Mode only |
| 1.3.6.1.4.1.4253.1.34.2.1.24 | ColumnuobLosThreshold | read-write | mandatory | uobModuleName - Configured Los Threshold in dBm T17VO - range: -100.0 to 45.0 default: -31 T17VR - range: -100.0 to 45.0 default: -31 T20FR - range: -40.0 to -… |
| 1.3.6.1.4.1.4253.1.34.2.1.25 | ColumnuobRflThreshold | read-write | mandatory | uobModuleName - Configured Rfl Threshold in dB T17VO - range: 0.0 to 50.0 T17VR - range: -23.0 to -14.0 T20FR - range: -23.0 to -14.0 T15FR - range: -23.0 to -… |
| 1.3.6.1.4.1.4253.1.35 | Nodefc8g | |||
| 1.3.6.1.4.1.4253.1.35.1 | Scalarfc8gNumber | read-only | mandatory | Number of rows in the fc8g table. This number is automatically updated whenever a new row is added to the table below. |
| 1.3.6.1.4.1.4253.1.35.2 | Tablefc8gTable | not-accessible | mandatory | This table represents the information for each FC8G card |
| 1.3.6.1.4.1.4253.1.35.2.1 | Rowfc8gEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.35.2.1.1 | Columnfc8gCardLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.35.2.1.2 | Columnfc8gCardShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.35.2.1.3 | Columnfc8gCardSlot | read-write | mandatory | The slot within the shelf where the module resides. The range of valid values range from 1 through 17 depending on the chassis type and the shelf where the mod… |
| 1.3.6.1.4.1.4253.1.35.2.1.4 | Columnfc8gSerialNum | read-only | mandatory | Module serial number. |
| 1.3.6.1.4.1.4253.1.35.2.1.5 | Columnfc8gModelNum | read-only | mandatory | Module model number. |
| 1.3.6.1.4.1.4253.1.35.2.1.6 | Columnfc8gHwName | read-only | mandatory | Module hardware name. |
| 1.3.6.1.4.1.4253.1.35.2.1.7 | Columnfc8gHwVersionID | read-only | mandatory | Module hardware version. |
| 1.3.6.1.4.1.4253.1.35.2.1.8 | Columnfc8gMfgDate | read-only | mandatory | Date and Time of manufacturing of the module |
| 1.3.6.1.4.1.4253.1.35.2.1.9 | Columnfc8gFwName | read-only | mandatory | Module firmware name. |
| 1.3.6.1.4.1.4253.1.35.2.1.10 | Columnfc8gFwVersionID | read-only | mandatory | Firmware version. |
| 1.3.6.1.4.1.4253.1.35.2.1.11 | Columnfc8gFwDate | read-only | mandatory | Firmware release date and time. |
| 1.3.6.1.4.1.4253.1.35.2.1.12 | Columnfc8gModelType | read-only | mandatory | Model type of the module. |
| 1.3.6.1.4.1.4253.1.35.2.1.13 | Columnfc8gName | read-write | mandatory | User configurable name of the module. |
| 1.3.6.1.4.1.4253.1.35.2.1.14 | Columnfc8gLink1DataRate | read-write | mandatory | Link 1 Data rate. |
| 1.3.6.1.4.1.4253.1.35.2.1.15 | Columnfc8gCpe1AutoDisable | read-write | mandatory | Flag to enable/disable automatic CPE disable for Link 1. |
| 1.3.6.1.4.1.4253.1.35.2.1.16 | Columnfc8gCpe1LaserEnabled | read-write | mandatory | Flag to enable/disable the CPE laser for Link 1. |
| 1.3.6.1.4.1.4253.1.35.2.1.17 | Columnfc8gLink1LaserEnabled | read-write | mandatory | Flag to enable/disable the LINK laser for Link 1. |
| 1.3.6.1.4.1.4253.1.35.2.1.18 | Columnfc8gLink2DataRate | read-write | mandatory | Link 2 Data rate. |
| 1.3.6.1.4.1.4253.1.35.2.1.19 | Columnfc8gCpe2AutoDisable | read-write | mandatory | Flag to enable/disable automatic CPE disable for Link 2. |
| 1.3.6.1.4.1.4253.1.35.2.1.20 | Columnfc8gCpe2LaserEnabled | read-write | mandatory | Flag to enable/disable the CPE laser for Link 2. |
| 1.3.6.1.4.1.4253.1.35.2.1.21 | Columnfc8gLink2LaserEnabled | read-write | mandatory | Flag to enable/disable the LINK laser for Link 2. |
| 1.3.6.1.4.1.4253.1.35.2.1.22 | Columnfc8gAdminState | read-write | mandatory | Administrative control for the module. Default value is enable. When disabled, no alarms/events are generated for the module. |
| 1.3.6.1.4.1.4253.1.35.2.1.23 | Columnfc8gSetState | read-write | mandatory | Instruct the module to do a warmboot or loopback. Successive loopbacks can be issued. A get on this will always return 'other'. |
| 1.3.6.1.4.1.4253.1.35.3 | Tablefc8gPortTable | not-accessible | mandatory | This table represents the information for each set of ports on the module. Ports are divided into two sets: mux ports and demux ports. |
| 1.3.6.1.4.1.4253.1.35.3.1 | Rowfc8gPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.1.35.3.1.1 | Columnfc8gPortLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.1.35.3.1.2 | Columnfc8gPortShelf | read-only | mandatory | The shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.35.3.1.3 | Columnfc8gPortSlot | read-only | mandatory | The slot within the shelf where the module resides. |
| 1.3.6.1.4.1.4253.1.35.3.1.4 | Columnfc8gPortIndex | read-only | mandatory | Port for which the below values apply. |
| 1.3.6.1.4.1.4253.1.35.3.1.5 | Columnfc8gPortName | read-only | mandatory | Port name. |
| 1.3.6.1.4.1.4253.1.35.3.1.6 | Columnfc8gPortMode | read-only | mandatory | Port mode. |
| 1.3.6.1.4.1.4253.1.35.3.1.7 | Columnfc8gPortWavelength | read-only | mandatory | Port wavelength. |
| 1.3.6.1.4.1.4253.1.35.3.1.8 | Columnfc8gPortRxPower | read-only | mandatory | Reported port receive power. |
| 1.3.6.1.4.1.4253.1.35.3.1.9 | Columnfc8gPortTxState | read-only | mandatory | State of port transmitter. |
| 1.3.6.1.4.1.4253.1.35.3.1.10 | Columnfc8gPortTxReach | read-only | mandatory | Port optical reach in meters. |
| 1.3.6.1.4.1.4253.1.35.3.1.11 | Columnfc8gPortSfpXfpSerialNumber | read-only | mandatory | Port SFP/XFP serial number. |
| 1.3.6.1.4.1.4253.2 | Nodeperformance | |||
| 1.3.6.1.4.1.4253.2.1 | Nodecurrent1 | |||
| 1.3.6.1.4.1.4253.2.1.1 | NodesystemPerf | |||
| 1.3.6.1.4.1.4253.2.1.1.1 | ScalarsysStatus | read-only | mandatory | The global status of the system as computed based on the traps (events) that are generated. Choices are: Critical, Major, Minor or Normal. |
| 1.3.6.1.4.1.4253.2.1.1.2 | ScalarsysClearStatus | not-accessible | mandatory | Reset the system state to Normal. The value of reset means set the state to Normal. A get on this will always return other. Note: This element is now made not-… |
| 1.3.6.1.4.1.4253.2.1.1.3 | ScalarsysClearCounters | read-write | mandatory | Reset all performance counters in this 15 minutes time interval to zero. The value of reset means to reset the counters to zero. A get on this will always retu… |
| 1.3.6.1.4.1.4253.2.1.1.4 | ScalarsysLastBootTime | read-only | mandatory | The date and time of the last system boot. This time represents the boot time of a CP card. It is also anonymous with the power-up cycle of the chassis. |
| 1.3.6.1.4.1.4253.2.1.1.5 | ScalarsysAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that the system has been up and running. This will generally be the same as 15 minutes in seconds (900), b… |
| 1.3.6.1.4.1.4253.2.1.1.6 | ScalarsysErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that the device has not experienced any alarms. This counter is across all cards in the chassis. The syste… |
| 1.3.6.1.4.1.4253.2.1.1.7 | ScalarsysExhaustTemperature | read-only | mandatory | Temperature of the Chassis. Units of dgree centigrade. |
| 1.3.6.1.4.1.4253.2.1.2 | NodedownloadPerf | |||
| 1.3.6.1.4.1.4253.2.1.2.1 | ScalardlStatus | read-write | mandatory | The global status of the download task. The download task (download to the device) is either ftp_inprogress, module update inprogrss or currently idle. Since o… |
| 1.3.6.1.4.1.4253.2.1.2.2 | ScalardlOkDownloads | read-only | mandatory | The number of successful downloads in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.2.3 | ScalardlBadDownloads | read-only | mandatory | The number of failed downloads in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.2.4 | ScalardlLongestTime | read-only | mandatory | Longest time for any download, in seconds, in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.2.5 | ScalardlLongestSize | read-only | mandatory | Longest download size for any download, in bytes, in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.3 | NodecpPerf | |||
| 1.3.6.1.4.1.4253.2.1.3.1 | ScalarcpNumEvents | read-only | mandatory | Total number of events received by the active CP in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.3.2 | ScalarcpTrapsSent | read-only | mandatory | Total number of traps sent by the active CP in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.3.3 | ScalarcpSNMPCmdsRcvd | read-only | mandatory | Total number of SNMP commands received by the active CP in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.3.4 | ScalarcpCounterFlag | read-write | mandatory | Turns software counters On or Off. |
| 1.3.6.1.4.1.4253.2.1.3.5 | TablecpCntrTable | not-accessible | mandatory | This table represents the information for each entry of the software counters. It is only applicable to the active MPM card. |
| 1.3.6.1.4.1.4253.2.1.3.5.1 | RowcpCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.3.5.1.1 | ColumncpCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the value of the current active… |
| 1.3.6.1.4.1.4253.2.1.3.5.1.2 | ColumncpCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the value of th… |
| 1.3.6.1.4.1.4253.2.1.3.5.1.3 | ColumncpCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.4 | ColumncpTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.5 | ColumncpTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.6 | ColumncpBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.7 | ColumncpTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.8 | ColumncpBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.9 | ColumncpBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.10 | ColumncpMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.11 | ColumncpBufAllocFail | read-only | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.12 | ColumncpEcbAllocFail | read-only | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.1.3.5.1.13 | ColumncpClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.3.6 | TablecpPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each communication processor |
| 1.3.6.1.4.1.4253.2.1.3.6.1 | RowcpPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.3.6.1.1 | ColumncpPerfShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2 |
| 1.3.6.1.4.1.4253.2.1.3.6.1.2 | ColumncpPerfSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 3 |
| 1.3.6.1.4.1.4253.2.1.3.6.1.3 | ColumncpPerfMode | read-only | mandatory | The valid types are: active CP or standby CP |
| 1.3.6.1.4.1.4253.2.1.3.6.1.4 | ColumncpPerfState | read-only | mandatory | The status of the communication card. The status' are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.1.3.6.1.5 | ColumncpPerfStatus | read-only | mandatory | The status of the communication processor. This status represents the state of the communication processor and in general is different from the status of the s… |
| 1.3.6.1.4.1.4253.2.1.3.6.1.6 | ColumncpLastBootTime | read-only | mandatory | The date and time of the last boot for this CP. |
| 1.3.6.1.4.1.4253.2.1.3.6.1.7 | ColumncpAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this CP has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.3.6.1.8 | ColumncpErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this CP has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.4 | NodeccPerf | |||
| 1.3.6.1.4.1.4253.2.1.4.1 | ScalarccNumEvents | read-only | mandatory | Total number of events received for all CC's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.4.2 | TableccCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.4.2.1 | RowccCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.4.2.1.1 | ColumnccCntrLocation | read-only | mandatory | The location of the CC card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known CC cards. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.2 | ColumnccCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.3 | ColumnccCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.4.2.1.4 | ColumnccCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.5 | ColumnccCounterFlag | read-write | mandatory | Turns software counters, both On or both Off for this CC. When set to Off, both counters statistic information will be cleared. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.6 | ColumnccTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.7 | ColumnccTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.8 | ColumnccBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.9 | ColumnccTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.10 | ColumnccBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.11 | ColumnccBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.12 | ColumnccMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.13 | ColumnccBufAllocFail | read-only | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.14 | ColumnccEcbAllocFail | read-only | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.1.4.2.1.15 | ColumnccClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.4.3 | TableccPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each channel card |
| 1.3.6.1.4.1.4253.2.1.4.3.1 | RowccPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.4.3.1.1 | ColumnccPerfLocation | read-only | mandatory | The location of the card. Valid choices are Local or Remote. The system automatically selects this value based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.2 | ColumnccPerfShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.1.4.3.1.3 | ColumnccPerfSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 4 to 42 |
| 1.3.6.1.4.1.4253.2.1.4.3.1.4 | ColumnccPerfState | read-only | mandatory | The state of the channel card. The states' are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.5 | ColumnccPerfStatus | read-only | mandatory | The status of the channel card. This status represents the status of the communication processor and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.6 | ColumnccLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.7 | ColumnccAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this CC has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.4.3.1.8 | ColumnccErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this CC has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.9 | ColumnccBiasCurrent | read-only | mandatory | Bias current for the optical laser. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.10 | ColumnccModulation | read-only | mandatory | The frequency modulation for the optical laser. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.11 | ColumnccApc | read-only | mandatory | The APC value. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.12 | ColumnccIwmModulation | read-only | mandatory | The frequency modulation for the IWM channel. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.13 | ColumnccLaserOnOff | read-only | mandatory | The laser On/Off flag. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.14 | ColumnccTemperature | read-only | mandatory | The current temperature, or the operating temperature of the optical device. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.15 | ColumnccIntensity | read-only | mandatory | The intensity of the optical light. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.16 | ColumnccSignalStrength | read-only | mandatory | The current signal strength for the optical path. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.17 | ColumnccLossOfLight | read-only | mandatory | If set to true, no laser light is present. If set to false, no loss of light has occurred. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.18 | ColumnccSignalDetect | not-accessible | mandatory | If set to true, signal is detected. If set to false, no signal is present. Replaced with ccCpeRxSigDetect |
| 1.3.6.1.4.1.4253.2.1.4.3.1.19 | ColumnccRefClock | not-accessible | mandatory | The value of the reference clock in decimal notation. For a given value, like 1660, the actual value is 16.60-EN. In otherwords, assume a two digit decimal poi… |
| 1.3.6.1.4.1.4253.2.1.4.3.1.20 | ColumnccClockDiv | not-accessible | mandatory | The clock divisor. Values are 1250, 622 or 155 in the appropriate clock frequency scale. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.21 | ColumnccLinkTxPwrStatus | read-only | mandatory | This indicates whether the link transmit power is within the normal range of operation. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.22 | ColumnccLinkRxSigStrStatus | read-only | mandatory | This indicates whether the link's receive signal is within the normal range of operation. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.23 | ColumnccCpeRxSigDetect | read-only | mandatory | This indicates whether there is presence of CPE receive signal |
| 1.3.6.1.4.1.4253.2.1.4.3.1.24 | ColumnccLinkIWMStatus | read-only | mandatory | This indicates the current status of IWM. This value is only applicable to remote OCMs |
| 1.3.6.1.4.1.4253.2.1.4.3.1.25 | ColumnccLinkSummaryStatus | read-only | mandatory | This is the result of a logical and operation of all the individual link status. If any of the attributes is N/A, except for the local local IWM status, this v… |
| 1.3.6.1.4.1.4253.2.1.4.3.1.26 | ColumnccProtectionMode | read-only | mandatory | UPSR Protection Mode: active, standby and n/a. |
| 1.3.6.1.4.1.4253.2.1.4.3.1.27 | ColumnccLinkRxSigStr | read-only | mandatory | Link's received signal strength in dBm. |
| 1.3.6.1.4.1.4253.2.1.5 | NodemuxPerf | |||
| 1.3.6.1.4.1.4253.2.1.5.1 | ScalarmuxNumEvents | read-only | mandatory | Total number of all traps (events) generated by all MUX's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.5.2 | TablemuxPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each mux/demux card |
| 1.3.6.1.4.1.4253.2.1.5.2.1 | RowmuxPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.5.2.1.1 | ColumnmuxPerfLocation | read-only | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.5.2.1.2 | ColumnmuxPerfShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.1.5.2.1.3 | ColumnmuxPerfSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 42 |
| 1.3.6.1.4.1.4253.2.1.5.2.1.4 | ColumnmuxType | read-only | mandatory | The type of the mux. The choices are: mux or demux. |
| 1.3.6.1.4.1.4253.2.1.5.2.1.5 | ColumnmuxPerfState | read-only | mandatory | The state of the mux card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.5.2.1.6 | ColumnmuxPerfStatus | read-only | mandatory | The status of the mux card. This status represents the status of the mux card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.5.2.1.7 | ColumnmuxLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.5.2.1.8 | ColumnmuxAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this Mux has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.5.2.1.9 | ColumnmuxErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this mux has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.6 | NodepsPerf | |||
| 1.3.6.1.4.1.4253.2.1.6.1 | ScalarpsNumEvents | read-only | mandatory | Total number of all traps (events) generated by all Power Supplies in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.6.2 | ScalarpsVoltageLevel3pt4Volt | read-only | mandatory | Voltage Level of the 3.4 V power supply. |
| 1.3.6.1.4.1.4253.2.1.6.3 | ScalarpsVoltageLevel5pt1Volt | read-only | mandatory | Voltage Level of the 5.1 V power supply. |
| 1.3.6.1.4.1.4253.2.1.6.4 | ScalarpsVoltageLevel12Volt | read-only | mandatory | Voltage Level of the 12 V power supply. |
| 1.3.6.1.4.1.4253.2.1.6.5 | TablepsPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each power supply card |
| 1.3.6.1.4.1.4253.2.1.6.5.1 | RowpsPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.6.5.1.1 | ColumnpsPerfID | read-only | mandatory | The module ID where the PS is plugged in. |
| 1.3.6.1.4.1.4253.2.1.6.5.1.2 | ColumnpsPerfType | read-only | mandatory | The type of the power supply. |
| 1.3.6.1.4.1.4253.2.1.6.5.1.3 | ColumnpsPerfState | read-only | mandatory | The state of the power supply module. |
| 1.3.6.1.4.1.4253.2.1.6.5.1.4 | ColumnpsPerfStatus | read-only | mandatory | The status of the power supply module. This status represents the status of the ps module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.6.6 | ScalarpsVoltageLevelFeedA | read-only | mandatory | Voltage Level of the -48 VDC input from Feed A. |
| 1.3.6.1.4.1.4253.2.1.6.7 | ScalarpsVoltageLevelFeedB | read-only | mandatory | Voltage Level of the -48 VDC input from Feed B. |
| 1.3.6.1.4.1.4253.2.1.6.8 | ScalarpsBreakerConditionFeedA | read-only | mandatory | State of Feed A breaker. |
| 1.3.6.1.4.1.4253.2.1.6.9 | ScalarpsPerfStatusFeedA | read-only | mandatory | State of Feed A breaker. Failed if it goes into shutdown condition Unknown if the corresponding breaker is open |
| 1.3.6.1.4.1.4253.2.1.6.10 | ScalarpsBreakerConditionFeedB | read-only | mandatory | State of Feed B breaker. |
| 1.3.6.1.4.1.4253.2.1.6.11 | ScalarpsPerfStatusFeedB | read-only | mandatory | State of Feed B. Failed if it goes into shutdown condition Unknown if the corresponding breaker is open |
| 1.3.6.1.4.1.4253.2.1.7 | NodefadmPerf | |||
| 1.3.6.1.4.1.4253.2.1.7.1 | ScalarfadmNumEvents | read-only | mandatory | Total number of all traps (events) generated by all MUX's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.7.2 | TablefadmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each fadm card |
| 1.3.6.1.4.1.4253.2.1.7.2.1 | RowfadmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.7.2.1.1 | ColumnfadmPerfLocation | read-only | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.7.2.1.2 | ColumnfadmPerfShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.1.7.2.1.3 | ColumnfadmPerfSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 42 |
| 1.3.6.1.4.1.4253.2.1.7.2.1.4 | ColumnfadmPerfState | read-only | mandatory | The status of the fadm card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.7.2.1.5 | ColumnfadmPerfStatus | read-only | mandatory | The status of the fadm card. This status represents the status of the fadm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.7.2.1.6 | ColumnfadmLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.7.2.1.7 | ColumnfadmAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this fadm card has been up and running. This will generally be the same as 15 minutes in seconds (900… |
| 1.3.6.1.4.1.4253.2.1.7.2.1.8 | ColumnfadmErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this fadm card has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.8 | NodeoppmPerf | |||
| 1.3.6.1.4.1.4253.2.1.8.1 | ScalaroppmNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all OPPM's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.8.2 | TableoppmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each oppm card |
| 1.3.6.1.4.1.4253.2.1.8.2.1 | RowoppmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.8.2.1.1 | ColumnoppmPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.2 | ColumnoppmPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.1.8.2.1.3 | ColumnoppmPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. Valid values are: 4 to 42 |
| 1.3.6.1.4.1.4253.2.1.8.2.1.4 | ColumnoppmPerfState | not-accessible | mandatory | The state of the oppm card. The states are: online, offline. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.5 | ColumnoppmPerfStatus | not-accessible | mandatory | The status of the oppm card. This status represents the status of the oppm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.6 | ColumnoppmLinkAState | not-accessible | mandatory | The state of the oppm card. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.7 | ColumnoppmLinkAStatus | not-accessible | mandatory | The status of the card channel. This status represents the status of the link A of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.8 | ColumnoppmLinkBState | not-accessible | mandatory | The state of the oppm card link B. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.9 | ColumnoppmLinkBStatus | not-accessible | mandatory | The status of the card channel. This status represents the status of the link B of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.10 | ColumnoppmLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.11 | ColumnoppmAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this oppm card has been up and running. This will generally be the same as 15 minutes in seconds (900… |
| 1.3.6.1.4.1.4253.2.1.8.2.1.12 | ColumnoppmErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this oppm card has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.8.2.1.13 | ColumnoppmWorkingPower | not-accessible | mandatory | working power displayed in dBm unit |
| 1.3.6.1.4.1.4253.2.1.8.2.1.14 | ColumnoppmProtectPower | not-accessible | mandatory | protect power displayed in dBm unit |
| 1.3.6.1.4.1.4253.2.1.9 | NodemcmPerf | |||
| 1.3.6.1.4.1.4253.2.1.9.1 | ScalarmcmNumEvents | read-only | mandatory | Total number of events received for all mcmt1's/mcme1's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.9.2 | TablemcmCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.9.2.1 | RowmcmCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.9.2.1.1 | ColumnmcmCntrLocation | read-only | mandatory | The location of the mcmt1/mcme1 card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mc… |
| 1.3.6.1.4.1.4253.2.1.9.2.1.2 | ColumnmcmCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3. The system automatically determines the right value for this entry based on the known (available) mcmt1/mcm… |
| 1.3.6.1.4.1.4253.2.1.9.2.1.3 | ColumnmcmCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 21. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.9.2.1.4 | ColumnmcmCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.5 | ColumnmcmCounterFlag | read-write | mandatory | Turns software counters On or Off for this mcmt1/mcme1. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.6 | ColumnmcmTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.7 | ColumnmcmTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.8 | ColumnmcmBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.9 | ColumnmcmTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.10 | ColumnmcmBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.11 | ColumnmcmBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.12 | ColumnmcmMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.13 | ColumnmcmBufAllocFail | read-only | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.14 | ColumnmcmEcbAllocFail | read-only | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.1.9.2.1.15 | ColumnmcmClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.9.3 | TablemcmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each mcmt1/mcme1 card |
| 1.3.6.1.4.1.4253.2.1.9.3.1 | RowmcmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.9.3.1.1 | ColumnmcmPerfLocation | read-only | mandatory | The location of the card. Valid choices are Local or Remote. The system automatically selects this value based on the known (available) mcmt1/mcme1 cards. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.2 | ColumnmcmPerfShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3 |
| 1.3.6.1.4.1.4253.2.1.9.3.1.3 | ColumnmcmPerfSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 21 |
| 1.3.6.1.4.1.4253.2.1.9.3.1.4 | ColumnmcmPerfState | read-only | mandatory | The state of the mcmt1/mcme1 card. The states' are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.5 | ColumnmcmPerfStatus | read-only | mandatory | The status of the channel card. This status represents the status of the communication processor and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.6 | ColumnmcmLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.7 | ColumnmcmAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this mcmt1/mcme1 has been up and running. This will generally be the same as 15 minutes in seconds (9… |
| 1.3.6.1.4.1.4253.2.1.9.3.1.8 | ColumnmcmErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this mcmt1/mcme1 has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.9 | ColumnmcmBiasCurrent | read-only | mandatory | Bias current for the optical laser. This value can be set remotely |
| 1.3.6.1.4.1.4253.2.1.9.3.1.10 | ColumnmcmModulation | read-only | mandatory | The frequency modulation for the optical laser. This value can be adjusted remotely. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.11 | ColumnmcmApc | read-only | mandatory | The APC value. This value can be set remotely. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.12 | ColumnmcmIwmModulation | read-only | mandatory | The frequency modulation for the IWM channel. This value can be adjusted remotely. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.13 | ColumnmcmLaserOnOff | read-only | mandatory | The laser On/Off flag. This value can be set remotely. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.14 | ColumnmcmTemperature | read-only | mandatory | The current temperature, or the operating temperature of the optical device. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.15 | ColumnmcmIntensity | read-only | mandatory | The intensity of the optical light. This value can be set remotely. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.16 | ColumnmcmSignalStrength | read-only | mandatory | The current signal strength for the optical path. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.17 | ColumnmcmLossOfLight | read-only | mandatory | If set to true, no laser light is present. If set to false, no loss of light has occurred. |
| 1.3.6.1.4.1.4253.2.1.9.3.1.18 | ColumnmcmSignalDetect | read-only | mandatory | If set to true, signal is detected. If set to false, no signal is present. |
| 1.3.6.1.4.1.4253.2.1.9.4 | TablemcmPortCurrTable | not-accessible | mandatory | This table represents the information for each MCMT1/MCME1 port's current counters. |
| 1.3.6.1.4.1.4253.2.1.9.4.1 | RowmcmPortCurrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.9.4.1.1 | ColumnmcmPortCurrCardLocation | read-only | mandatory | Location of the MCMT1/MCME1 port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.2.1.9.4.1.2 | ColumnmcmPortCurrCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 2..3. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.3 | ColumnmcmPortCurrCardSlot | read-only | mandatory | The slot within the shelf the Module is in. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.4 | ColumnmcmPortCurrIndex | read-only | mandatory | Port's index. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.5 | ColumnmcmPortCurrASs | read-only | mandatory | MCMT1/MCME1 port's ASs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.6 | ColumnmcmPortCurrFrameASs | not-accessible | mandatory | MCMT1/MCME1 port's FrameASs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.7 | ColumnmcmPortCurrFEs | read-only | mandatory | MCMT1/MCME1 port's FEs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.8 | ColumnmcmPortCurrCRCErrs | read-only | mandatory | MCMT1/MCME1 port's CRC errs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.9 | ColumnmcmPortCurrSESs | read-only | mandatory | MCMT1/MCME1 port's SESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.10 | ColumnmcmPortCurrSEFSs | read-only | mandatory | MCMT1/MCME1 port's SEFSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.11 | ColumnmcmPortCurrUASs | read-only | mandatory | MCMT1/MCME1 port's UASs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.12 | ColumnmcmPortCurrLESs | read-only | mandatory | MCMT1/MCME1 port's LESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.13 | ColumnmcmPortCurrBESs | read-only | mandatory | MCMT1/MCME1 port's BESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.14 | ColumnmcmPortCurrDMs | read-only | mandatory | MCMT1/MCME1 port's DMSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.9.4.1.15 | ColumnmcmPortCurrLCVs | read-only | mandatory | MCMT1/MCME1 port's LCVs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.1.10 | NodefnPerf | |||
| 1.3.6.1.4.1.4253.2.1.10.1 | ScalarfnNumEvents | read-only | mandatory | Total number of all traps (events) generated by all Fans in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.10.2 | TablefnPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each fan module. |
| 1.3.6.1.4.1.4253.2.1.10.2.1 | RowfnPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.10.2.1.1 | ColumnfnPerfID | read-only | mandatory | The module ID where the fan module is plugged in. |
| 1.3.6.1.4.1.4253.2.1.10.2.1.2 | ColumnfnPerfState | read-only | mandatory | The state of the fan module. |
| 1.3.6.1.4.1.4253.2.1.10.2.1.3 | ColumnfnPerfStatus | read-only | mandatory | The status of the fan module. This status represents the status of the fan module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.11 | NodecsimPerf | |||
| 1.3.6.1.4.1.4253.2.1.11.1 | ScalarcsimNumEvents | not-accessible | mandatory | This variable keeps track of the number of events related to ColorSIM. The reason this has been made obsolete is that all colorsim related events would eventua… |
| 1.3.6.1.4.1.4253.2.1.11.2 | TablecsimCurrentTable | not-accessible | mandatory | This table represents the information for each colorsim card in the most current interval |
| 1.3.6.1.4.1.4253.2.1.11.2.1 | RowcsimCurrentEntry | not-accessible | mandatory | Specifies the index for each row in the table below. |
| 1.3.6.1.4.1.4253.2.1.11.2.1.1 | ColumncsimCurrentLocation | read-only | mandatory | Location of the ColorSIM module |
| 1.3.6.1.4.1.4253.2.1.11.2.1.2 | ColumncsimCurrentShelf | read-only | mandatory | The shelf of the ColorSIM module |
| 1.3.6.1.4.1.4253.2.1.11.2.1.3 | ColumncsimCurrentSlot | read-only | mandatory | The Slot of the ColorSIM module |
| 1.3.6.1.4.1.4253.2.1.11.2.1.4 | ColumncsimCurrentEFIs | read-only | mandatory | The counter associated with the number of Error Free Interval Counts in the current update (default: 15 minutes) interval. |
| 1.3.6.1.4.1.4253.2.1.11.2.1.5 | ColumncsimCurrentEIs | read-only | mandatory | The counter associated with the number of Errored Interval Counts in the current update (default: 15 minutes) interval. |
| 1.3.6.1.4.1.4253.2.1.11.2.1.6 | ColumncsimCurrentSEIs | read-only | mandatory | The counter associated with the number of Severly Errored Interval Counts in the current update (default:15 minutes) interval. |
| 1.3.6.1.4.1.4253.2.1.11.2.1.7 | ColumncsimCurrentBERs | read-only | mandatory | The counter associated with the number of Bit Error Rates Counts in the current update (default: 15 minutes) interval. The unit will be in the form of x.ye-z. |
| 1.3.6.1.4.1.4253.2.1.11.2.1.8 | ColumncsimCurrentUAIs | read-only | mandatory | The counter associated with the number of Unavailable Interval Counts in the current update (default: 15 minutes) interval. |
| 1.3.6.1.4.1.4253.2.1.11.2.1.9 | ColumncsimCurrentGIs | read-only | mandatory | The number of gating intervals over which the data was collected. |
| 1.3.6.1.4.1.4253.2.1.11.2.1.10 | ColumncsimCurrentDateTime | read-only | mandatory | Time in seconds elasped since 01/01/1970 00:00:00 GMT. Assuming local time is same as GMT |
| 1.3.6.1.4.1.4253.2.1.12 | NoderpsmPerf | |||
| 1.3.6.1.4.1.4253.2.1.12.1 | ScalarrpsmNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RPSM's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.12.2 | TablerpsmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each rpsm card |
| 1.3.6.1.4.1.4253.2.1.12.2.1 | RowrpsmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.12.2.1.1 | ColumnrpsmPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.2 | ColumnrpsmPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.1.12.2.1.3 | ColumnrpsmPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.4 | ColumnrpsmPerfState | not-accessible | mandatory | The state of the rpsm card. The possible states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.5 | ColumnrpsmPerfStatus | not-accessible | mandatory | The status of the rpsm card. This status represents the status of the rpsm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.6 | ColumnrpsmLinkEastState | not-accessible | mandatory | The link state of path East, whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.7 | ColumnrpsmLinkEastStatus | not-accessible | mandatory | The status of the card channel. This status represents the status of the link East of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.8 | ColumnrpsmLinkWestState | not-accessible | mandatory | The link state of path West, whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.9 | ColumnrpsmLinkWestStatus | not-accessible | mandatory | The status of the card channel. This status represents the status of the link West of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.10 | ColumnrpsmLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.11 | ColumnrpsmAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rpsm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.12.2.1.12 | ColumnrpsmErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rpsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.13 | ColumnrpsmWorkingPower | not-accessible | mandatory | Working link power of the RPSM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.12.2.1.14 | ColumnrpsmProtectionPower | not-accessible | mandatory | Protection link power of the RPSM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.13 | NodersdmPerf | |||
| 1.3.6.1.4.1.4253.2.1.13.1 | ScalarrsdmNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RSDM's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.13.2 | TablersdmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each rsdm card |
| 1.3.6.1.4.1.4253.2.1.13.2.1 | RowrsdmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.13.2.1.1 | ColumnrsdmPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.2 | ColumnrsdmPerfShelf | not-accessible | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.3 | ColumnrsdmPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.4 | ColumnrsdmPerfState | not-accessible | mandatory | The state of the rsdm card. The states are: online, offline. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.5 | ColumnrsdmPerfStatus | not-accessible | mandatory | The status of the rsdm card. This status represents the status of the rsdm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.6 | ColumnrsdmLinkEastState | not-accessible | mandatory | The link state of path A, whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.7 | ColumnrsdmLinkEastStatus | not-accessible | mandatory | The status of the card channel. This status represents the status of the link East of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.8 | ColumnrsdmLinkWestState | not-accessible | mandatory | The link state of path West, whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.9 | ColumnrsdmLinkWestStatus | not-accessible | mandatory | The status of the card channel. This status represents the status of the link West of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.10 | ColumnrsdmLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.11 | ColumnrsdmAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rsdm card has been up and running. This will generally be the same as 15 minutes in seconds (900… |
| 1.3.6.1.4.1.4253.2.1.13.2.1.12 | ColumnrsdmErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rsdm card has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.13 | ColumnrsdmWorkingPower | not-accessible | mandatory | Working link power of the RSDM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.13.2.1.14 | ColumnrsdmProtectionPower | not-accessible | mandatory | Protection link power of the RSDM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.14 | NodertdmPerf | |||
| 1.3.6.1.4.1.4253.2.1.14.1 | ScalarrtdmNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RTDM's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.14.2 | TablertdmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each rtdm card |
| 1.3.6.1.4.1.4253.2.1.14.2.1 | RowrtdmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.14.2.1.1 | ColumnrtdmPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.14.2.1.2 | ColumnrtdmPerfShelf | not-accessible | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.14.2.1.3 | ColumnrtdmPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.14.2.1.4 | ColumnrtdmPerfState | not-accessible | mandatory | The state of the rtdm card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.14.2.1.5 | ColumnrtdmPerfStatus | not-accessible | mandatory | The status of the rtdm card. This status represents the status of the rtdm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.14.2.1.6 | ColumnrtdmLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.14.2.1.7 | ColumnrtdmAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rtdm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.14.2.1.8 | ColumnrtdmErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rtdm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.15 | NodeosamPerf | |||
| 1.3.6.1.4.1.4253.2.1.15.1 | ScalarosamNumEvents | read-only | mandatory | Total number of events received for all osam's in the most current 15 minutes slot. |
| 1.3.6.1.4.1.4253.2.1.15.2 | TableosamCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.15.2.1 | RowosamCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.15.2.1.1 | ColumnosamCntrLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.2.1.15.2.1.2 | ColumnosamCntrShelf | read-only | mandatory | The shelf number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.1.15.2.1.3 | ColumnosamCntrSlot | read-only | mandatory | The slot number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.1.15.2.1.4 | ColumnosamCntrKeepAlivePktSent | read-only | mandatory | The total number of keep alive packets sent. |
| 1.3.6.1.4.1.4253.2.1.15.2.1.5 | ColumnosamCntrKeepAlivePktRcvd | read-only | mandatory | The total number of keep alive packets received. |
| 1.3.6.1.4.1.4253.2.1.15.2.1.6 | ColumnosamCntrKeepAliveBadPktRcvd | read-only | mandatory | The total number of bad keep alive data packets received. |
| 1.3.6.1.4.1.4253.2.1.15.3 | TableosamPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each osam card |
| 1.3.6.1.4.1.4253.2.1.15.3.1 | RowosamPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.15.3.1.1 | ColumnosamPerfLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.2 | ColumnosamPerfShelf | read-only | mandatory | The shelf number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.3 | ColumnosamPerfSlot | read-only | mandatory | The slot number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.4 | ColumnosamPerfState | read-only | mandatory | The current state of the module. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.5 | ColumnosamPerfStatus | read-only | mandatory | The current alarm status of the channel. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.6 | ColumnosamPerfLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.7 | ColumnosamPerfAvailTime | read-only | mandatory | The number of seconds in the most current 15 minutes interval that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.8 | ColumnosamPerfErrFreeSecs | read-only | mandatory | The number of seconds in the most current 15 minutes interval that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.9 | ColumnosamPerfAprStatus | read-only | mandatory | The status of the automatic power reduction mode. Not applicable to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.10 | ColumnosamPerfInputPower | read-only | mandatory | The power at the input in dBm. Not applicable to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.11 | ColumnosamPerfBFDPower | read-only | mandatory | The back facet diode reading in the pump laser; related to the power output of the pump laser. This values isn't calibrated and doesn't have a unit. Not applic… |
| 1.3.6.1.4.1.4253.2.1.15.3.1.12 | ColumnosamPerfOutputPower | read-only | mandatory | The power at the output port in dBm. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.13 | ColumnosamPerfAPRDetector1Power | read-only | mandatory | The automatic power reduction detector 1 reading in dBm. Two readings are provided for redundancy purposes. Not applicable to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.14 | ColumnosamPerfAPRDetector2Power | read-only | mandatory | The automatic power reduction detector 2 reading in dBm. Two readings are provided for redundancy purposes. Not applicable to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.15 | ColumnosamPerfLaserTemperature | read-only | mandatory | The pump laser temperature in degree Celsius. Not applicable to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.16 | ColumnosamPerfTecCurrent | read-only | mandatory | The Thermo-Electric Cooler current in mA. Not applicable to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.17 | ColumnosamPerfBiasCurrent | read-only | mandatory | The measured pump laser bias current in mA. Not applicable to OSAM-HP/LP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.18 | ColumnosamPerfAmplifierGain | read-only | mandatory | The measured overall amplifier gain in dB. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.19 | ColumnosamPerfPCBTemperature | read-only | mandatory | The temperature of the printed circuit board in degree Celsius. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.20 | Columnosam2PerfPump1BFDPower | read-only | mandatory | The back facet diode reading in pump 1 laser; related to the power output of the pump laser. Unit to represent the value is DAC (Digital to Analog converter) |
| 1.3.6.1.4.1.4253.2.1.15.3.1.21 | Columnosam2PerfPump2BFDPower | read-only | mandatory | The back facet diode reading in pump 2 laser; related to the power output of the pump laser. Unit to represent the value is DAC (Digital to Analog converter). … |
| 1.3.6.1.4.1.4253.2.1.15.3.1.22 | Columnosam2PerfPump1IBias | read-only | mandatory | Indicates the bias current of Pump 1 in mA. The range of values of bias current range from 40 mA - barely turning on, to MaxIbias - maximum operating current r… |
| 1.3.6.1.4.1.4253.2.1.15.3.1.23 | Columnosam2PerfPump2IBias | read-only | mandatory | Indicates the bias current of Pump 2 in mA. The range of values of bias current range from 40 mA - barely turning on, to MaxIbias - maximum operating current r… |
| 1.3.6.1.4.1.4253.2.1.15.3.1.24 | Columnosam2PerfPump1ITEC | read-only | mandatory | Indicates the current level in mA of Thermal Electric Cooler (TEC) used for cooling laser pump 1. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.25 | Columnosam2PerfPump2ITEC | read-only | mandatory | Indicates the current level in mA of Thermal Electric Cooler (TEC) used for cooling laser pump 2. Applicable only for OSAM-HP |
| 1.3.6.1.4.1.4253.2.1.15.3.1.26 | Columnosam2PerfPump1Temp | read-only | mandatory | Laser pump (#1) temperature in degree celcius |
| 1.3.6.1.4.1.4253.2.1.15.3.1.27 | Columnosam2PerfPump2Temp | read-only | mandatory | Laser pump (#2) temperature in degree celcius Applicable only for OSAM-HP module |
| 1.3.6.1.4.1.4253.2.1.15.3.1.28 | Columnosam2PerfGBInputPower | read-only | mandatory | Gain block input power in dBm. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.29 | Columnosam2PerfGBOutputPower | read-only | mandatory | Gain block output power in dBm with attenuation set to zero. |
| 1.3.6.1.4.1.4253.2.1.15.3.1.30 | Columnosam2PerfAttenuation | read-only | mandatory | Indicates optical attenuation in dB imposed by variable optical attenuator(VOA) |
| 1.3.6.1.4.1.4253.2.1.16 | NodersmPerf | |||
| 1.3.6.1.4.1.4253.2.1.16.1 | ScalarrsmNumEvents | read-only | mandatory | Total number of all traps (events) generated by all RSM's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.16.2 | TablersmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each rsm card |
| 1.3.6.1.4.1.4253.2.1.16.2.1 | RowrsmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.16.2.1.1 | ColumnrsmPerfLocation | read-only | mandatory | The location of the card. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.2 | ColumnrsmPerfShelf | read-only | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.3 | ColumnrsmPerfSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.4 | ColumnrsmPerfState | read-only | mandatory | The state of the rsm card. The possible states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.5 | ColumnrsmPerfStatus | read-only | mandatory | The status of the rsm card. This status represents the status of the rsm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.6 | ColumnrsmLinkAState | read-only | mandatory | The link state of path A (East), whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.7 | ColumnrsmLinkAStatus | read-only | mandatory | The status of the card channel. This status represents the status of the link A (East) of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.8 | ColumnrsmLinkBState | read-only | mandatory | The link state of path B (West), whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.9 | ColumnrsmLinkBStatus | read-only | mandatory | The status of the card channel. This status represents the status of the link B (West) of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.10 | ColumnrsmLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.11 | ColumnrsmAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this rsm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.16.2.1.12 | ColumnrsmErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this rsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.13 | ColumnrsmWorkingPower | read-only | mandatory | Working link power of the RSM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.16.2.1.14 | ColumnrsmProtectionPower | read-only | mandatory | Protection link power of the RSM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.17 | NodeupsmPerf | |||
| 1.3.6.1.4.1.4253.2.1.17.1 | ScalarupsmNumEvents | read-only | mandatory | Total number of all traps (events) generated by all UPSM's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.17.2 | TableupsmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each upsm card |
| 1.3.6.1.4.1.4253.2.1.17.2.1 | RowupsmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.17.2.1.1 | ColumnupsmPerfLocation | read-only | mandatory | The location of the card. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.2 | ColumnupsmPerfShelf | read-only | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.3 | ColumnupsmPerfSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.4 | ColumnupsmPerfState | read-only | mandatory | The state of the upsm card. The possible states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.5 | ColumnupsmPerfStatus | read-only | mandatory | The status of the upsm card. This status represents the status of the upsm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.6 | ColumnupsmLinkAState | read-only | mandatory | The link state of path A (East), whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.7 | ColumnupsmLinkAStatus | read-only | mandatory | The status of the card channel. This status represents the status of the link A (East) of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.8 | ColumnupsmLinkBState | read-only | mandatory | The link state of path B (West), whether light is being detected. The states are: linked, notLinked. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.9 | ColumnupsmLinkBStatus | read-only | mandatory | The status of the card channel. This status represents the status of the link B (West) of the card and in general is different from the status of the card. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.10 | ColumnupsmLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.11 | ColumnupsmAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this upsm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.17.2.1.12 | ColumnupsmErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this upsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.13 | ColumnupsmWorkingPower | read-only | mandatory | Working link power of the UPSM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.17.2.1.14 | ColumnupsmProtectionPower | read-only | mandatory | Protection link power of the UPSM card in dBm. |
| 1.3.6.1.4.1.4253.2.1.18 | NodemcmescPerf | |||
| 1.3.6.1.4.1.4253.2.1.18.1 | ScalarmcmescNumEvents | read-only | mandatory | Total number of events received for all mcmesc's in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.18.2 | TablemcmescCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.18.2.1 | RowmcmescCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.18.2.1.1 | ColumnmcmescCntrLocation | read-only | mandatory | The location of the mcmesc card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mcmesc … |
| 1.3.6.1.4.1.4253.2.1.18.2.1.2 | ColumnmcmescCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3. The system automatically determines the right value for this entry based on the known (available) mcmesc ca… |
| 1.3.6.1.4.1.4253.2.1.18.2.1.3 | ColumnmcmescCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 21. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.18.2.1.4 | ColumnmcmescCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.5 | ColumnmcmescCounterFlag | read-write | mandatory | Turns software counters On or Off for this mcmesc. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.6 | ColumnmcmescTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.7 | ColumnmcmescTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.8 | ColumnmcmescBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.9 | ColumnmcmescTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.10 | ColumnmcmescBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.11 | ColumnmcmescBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.12 | ColumnmcmescMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.18.2.1.13 | ColumnmcmescClearCntrs | read-write | mandatory | If the value is reset, all software counters are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.18.3 | TablemcmescPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each mcmesc card |
| 1.3.6.1.4.1.4253.2.1.18.3.1 | RowmcmescPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.18.3.1.1 | ColumnmcmescPerfLocation | read-only | mandatory | The location of the card. Valid choices are Local or Remote. The system automatically selects this value based on the known (available) mcmesc cards. |
| 1.3.6.1.4.1.4253.2.1.18.3.1.2 | ColumnmcmescPerfShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3 |
| 1.3.6.1.4.1.4253.2.1.18.3.1.3 | ColumnmcmescPerfSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 21 |
| 1.3.6.1.4.1.4253.2.1.18.3.1.4 | ColumnmcmescPerfState | read-only | mandatory | The state of the mcmesc card. The states' are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.1.18.3.1.5 | ColumnmcmescPerfStatus | read-only | mandatory | The status of the channel card. This status represents the status of the communication processor and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.18.3.1.6 | ColumnmcmescLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.1.18.3.1.7 | ColumnmcmescAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this mcmesc has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.18.4 | TablemcmescPortCurrTable | not-accessible | mandatory | This table represents the information for each mcmesc cpe port's current counters. |
| 1.3.6.1.4.1.4253.2.1.18.4.1 | RowmcmescPortCurrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.18.4.1.1 | ColumnmcmescPortCurrCardLocation | read-only | mandatory | Location of the MCMESC CPE port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.2.1.18.4.1.2 | ColumnmcmescPortCurrCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 2..3. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.3 | ColumnmcmescPortCurrCardSlot | read-only | mandatory | The slot within the shelf the Module is in. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.4 | ColumnmcmescPortCurrPort | read-only | mandatory | CPE port's index. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.5 | ColumnmcmescPortCurrRxSig | read-only | mandatory | CPE port's receive signal power. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.6 | ColumnmcmescPortCurrDuration | read-only | mandatory | mcmesc CPE port's current ongoing interval duration. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.7 | ColumnmcmescPortCurrEns | read-only | mandatory | mcmesc CPE port's enabled seconds during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.8 | ColumnmcmescPortCurrLoss | read-only | mandatory | mcmesc CPE port's loss of signal seconds during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.9 | ColumnmcmescPortCurrCrcErr | read-only | mandatory | mcmesc CPE port's CRC error counter during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.10 | ColumnmcmescPortCurrOobErr | read-only | mandatory | mcmesc CPE port's Out-Of_Band error counter during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.11 | ColumnmcmescPortCurrRdpErr | read-only | mandatory | mcmesc CPE port's Running Disparity error counter during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.4.1.12 | ColumnmcmescPortCurrBer | read-only | mandatory | mcmesc CPE port's BER, in the form of x.yE-z. |
| 1.3.6.1.4.1.4253.2.1.18.5 | TablemcmescLinkCurrTable | not-accessible | mandatory | This table represents the information for each mcmesc cpe port's current counters. |
| 1.3.6.1.4.1.4253.2.1.18.5.1 | RowmcmescLinkCurrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.18.5.1.1 | ColumnmcmescLinkCurrCardLocation | read-only | mandatory | Location of the MCMESC CPE port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.2.1.18.5.1.2 | ColumnmcmescLinkCurrCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 2..3. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.3 | ColumnmcmescLinkCurrCardSlot | read-only | mandatory | The slot within the shelf the Module is in. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.4 | ColumnmcmescLinkCurrRxSig | read-only | mandatory | Link port's receive signal power. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.5 | ColumnmcmescLinkCurrDuration | read-only | mandatory | mcmesc LINK port's current ongoing interval duration. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.6 | ColumnmcmescLinkCurrTsos | read-only | mandatory | mcmesc LINK port's test-sequence on seconds during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.7 | ColumnmcmescLinkCurrLoss | read-only | mandatory | mcmesc LINK port's loss of signal seconds during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.8 | ColumnmcmescLinkCurrCrcErr | read-only | mandatory | mcmesc LINK port's CRC error counter during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.9 | ColumnmcmescLinkCurrOobErr | read-only | mandatory | mcmesc LINK port's Out-Of_Band error counter during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.10 | ColumnmcmescLinkCurrRdpErr | read-only | mandatory | mcmesc LINK port's Running Disparity error counter during current ongoing interval. |
| 1.3.6.1.4.1.4253.2.1.18.5.1.11 | ColumnmcmescLinkCurrBer | read-only | mandatory | mcmesc LINK port's BER, in the form of x.yE-z. |
| 1.3.6.1.4.1.4253.2.1.21 | NoderoutingPerf | |||
| 1.3.6.1.4.1.4253.2.1.21.1 | TableimnRoutingPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each route |
| 1.3.6.1.4.1.4253.2.1.21.1.1 | RowimnRoutingPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.21.1.1.1 | ColumnimnRoutePerfIpDest | read-only | mandatory | Destination IP address. Not supported for remote TMM masters. |
| 1.3.6.1.4.1.4253.2.1.21.1.1.2 | ColumnimnRoutePerfStatus | read-only | mandatory | Is the route active, comatose or dead |
| 1.3.6.1.4.1.4253.2.1.22 | NodetapPerf | |||
| 1.3.6.1.4.1.4253.2.1.22.1 | ScalartapNumEvents | read-only | mandatory | Total number of all traps (events) generated by all TAP modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.22.2 | TabletapPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each TAP module. |
| 1.3.6.1.4.1.4253.2.1.22.2.1 | RowtapPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.22.2.1.1 | ColumntapPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.22.2.1.2 | ColumntapPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.22.2.1.3 | ColumntapPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.22.2.1.4 | ColumntapType | read-only | mandatory | Module type. |
| 1.3.6.1.4.1.4253.2.1.22.2.1.5 | ColumntapPerfState | read-only | mandatory | The state of the TAP module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.22.2.1.6 | ColumntapPerfStatus | read-only | mandatory | The status of the TAP module. This status represents the status of the TAP module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.22.2.1.7 | ColumntapLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.22.2.1.8 | ColumntapAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.22.2.1.9 | ColumntapErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.23 | NodevoadmPerf | |||
| 1.3.6.1.4.1.4253.2.1.23.1 | ScalarvoadmNumEvents | read-only | mandatory | Total number of all traps (events) generated by all VOADM modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.23.2 | TablevoadmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each VOADM module. |
| 1.3.6.1.4.1.4253.2.1.23.2.1 | RowvoadmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.23.2.1.1 | ColumnvoadmPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.23.2.1.2 | ColumnvoadmPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.23.2.1.3 | ColumnvoadmPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.23.2.1.4 | ColumnvoadmType | read-only | mandatory | Module type. |
| 1.3.6.1.4.1.4253.2.1.23.2.1.5 | ColumnvoadmPerfState | read-only | mandatory | The state of the VOADM module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.23.2.1.6 | ColumnvoadmPerfStatus | read-only | mandatory | The status of the VOADM module. This status represents the status of the VOADM module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.23.2.1.7 | ColumnvoadmLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.23.2.1.8 | ColumnvoadmAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.23.2.1.9 | ColumnvoadmErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.24 | NodedmmPerf | |||
| 1.3.6.1.4.1.4253.2.1.24.1 | ScalardmmNumEvents | read-only | mandatory | Total number of all traps (events) generated by all DMM modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.24.2 | TabledmmPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each DMM module. |
| 1.3.6.1.4.1.4253.2.1.24.2.1 | RowdmmPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.24.2.1.1 | ColumndmmPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.24.2.1.2 | ColumndmmPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.24.2.1.3 | ColumndmmPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.24.2.1.4 | ColumndmmPerfState | read-only | mandatory | The state of the DMM module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.24.2.1.5 | ColumndmmPerfStatus | read-only | mandatory | The status of the DMM module. This status represents the status of the DMM module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.24.2.1.6 | ColumndmmLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.24.2.1.7 | ColumndmmAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.24.2.1.8 | ColumndmmErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.24.3 | TabledmmCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.24.3.1 | RowdmmCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.24.3.1.1 | ColumndmmCntrLocation | read-only | mandatory | The location of the DMM card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known DMM cards. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.2 | ColumndmmCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) DMM cards. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.3 | ColumndmmCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.24.3.1.4 | ColumndmmCntrType | read-only | mandatory | The type of the software counter data in this row. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.5 | ColumndmmTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.6 | ColumndmmTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.7 | ColumndmmTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.8 | ColumndmmBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.9 | ColumndmmBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.10 | ColumndmmBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.11 | ColumndmmMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.24.3.1.12 | ColumndmmClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.24.4 | TabledmmPmTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.24.4.1 | RowdmmPmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.24.4.1.1 | ColumndmmPmLocation | read-only | mandatory | The location of the DMM card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known DMM cards. |
| 1.3.6.1.4.1.4253.2.1.24.4.1.2 | ColumndmmPmShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) DMM cards. |
| 1.3.6.1.4.1.4253.2.1.24.4.1.3 | ColumndmmPmSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.24.4.1.4 | ColumndmmPmType | read-only | mandatory | The type of the software counter data in this row. |
| 1.3.6.1.4.1.4253.2.1.24.4.1.5 | ColumndmmPmErrors | read-only | mandatory | The number of packets errors since port last came online. |
| 1.3.6.1.4.1.4253.2.1.24.4.1.6 | ColumndmmPmErredSecs | read-only | mandatory | The number of erred seconds since port last came online. |
| 1.3.6.1.4.1.4253.2.1.24.4.1.7 | ColumndmmStartTime | read-only | mandatory | The date/time the port came last online. |
| 1.3.6.1.4.1.4253.2.1.24.4.1.8 | ColumndmmClearPmCntrs | read-write | mandatory | If the value is reset, all PM counters for this port are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.24.4.1.9 | ColumndmmPmRxPower | read-only | mandatory | Port receive power. |
| 1.3.6.1.4.1.4253.2.1.24.4.1.10 | ColumndmmPmTxPower | read-only | mandatory | Port receive power. |
| 1.3.6.1.4.1.4253.2.1.25 | Nodeocm10gfPerf | |||
| 1.3.6.1.4.1.4253.2.1.25.1 | Scalarocm10gfNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OCM10GF modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.25.2 | Tableocm10gfPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each OCM10GF module. |
| 1.3.6.1.4.1.4253.2.1.25.2.1 | Rowocm10gfPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.25.2.1.1 | Columnocm10gfPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.25.2.1.2 | Columnocm10gfPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.25.2.1.3 | Columnocm10gfPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.25.2.1.4 | Columnocm10gfPerfState | read-only | mandatory | The state of the OCM10GF module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.25.2.1.5 | Columnocm10gfPerfStatus | read-only | mandatory | The status of the OCM10GF module. This status represents the status of the OCM10GF module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.25.2.1.6 | Columnocm10gfLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.25.2.1.7 | Columnocm10gfAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.25.2.1.8 | Columnocm10gfErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.25.3 | Tableocm10gfCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.25.3.1 | Rowocm10gfCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.25.3.1.1 | Columnocm10gfCntrLocation | read-only | mandatory | The location of the OCM10GF card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OCM10G… |
| 1.3.6.1.4.1.4253.2.1.25.3.1.2 | Columnocm10gfCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OCM10GF c… |
| 1.3.6.1.4.1.4253.2.1.25.3.1.3 | Columnocm10gfCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.25.3.1.4 | Columnocm10gfCntrType | read-only | mandatory | The type of the software counter data in this row. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.5 | Columnocm10gfTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.6 | Columnocm10gfTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.7 | Columnocm10gfTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.8 | Columnocm10gfBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.9 | Columnocm10gfBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.10 | Columnocm10gfBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.11 | Columnocm10gfMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.25.3.1.12 | Columnocm10gfClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.25.4 | Tableocm10gfPmTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.25.4.1 | Rowocm10gfPmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.25.4.1.1 | Columnocm10gfPmLocation | read-only | mandatory | The location of the OCM10GF card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OCM10G… |
| 1.3.6.1.4.1.4253.2.1.25.4.1.2 | Columnocm10gfPmShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OCM10GF c… |
| 1.3.6.1.4.1.4253.2.1.25.4.1.3 | Columnocm10gfPmSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.25.4.1.4 | Columnocm10gfPmNumIntervals | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.5 | Columnocm10gfPmLinkRxPwr | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.6 | Columnocm10gfPmLinkTxPwr | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.7 | Columnocm10gfPmLinkFecErrors | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.8 | Columnocm10gfPmLinkUncorrectedFecErrs | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.9 | Columnocm10gfPmLinkCorrectedFecErrs | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.10 | Columnocm10gfPmLinkCorrectedOnesErr | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.11 | Columnocm10gfPmLinkErredSeconds | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.12 | Columnocm10gfPmCpeRxPwr | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.13 | Columnocm10gfPmCpeTxPwr | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.14 | Columnocm10gfPmCpeSonetRxB2Errs | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.15 | Columnocm10gfPmCpeSonetTxB2Errs | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.16 | Columnocm10gfPmCpe10GbeRxTotalPkts | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.17 | Columnocm10gfPmCpe10GbeRxErredPkts | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.18 | Columnocm10gfPmCpe10GbeTxTotalPkts | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.19 | Columnocm10gfPmCpe10gbeTxErredPkts | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.20 | Columnocm10gfPmCpeErredSeconds | read-only | mandatory | |
| 1.3.6.1.4.1.4253.2.1.25.4.1.21 | Columnocm10gfClearPmCntrs | read-write | mandatory | If the value is reset, all PM counters for this port are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.26 | Nodeocm2Perf | |||
| 1.3.6.1.4.1.4253.2.1.26.1 | Scalarocm2NumEvents | read-only | mandatory | Total number of all traps (events) generated by all OCM2 modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.26.2 | Tableocm2PerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each OCM2 module. |
| 1.3.6.1.4.1.4253.2.1.26.2.1 | Rowocm2PerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.26.2.1.1 | Columnocm2PerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.26.2.1.2 | Columnocm2PerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.26.2.1.3 | Columnocm2PerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.26.2.1.4 | Columnocm2PerfState | read-only | mandatory | The state of the OCM2 module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.26.2.1.5 | Columnocm2PerfStatus | read-only | mandatory | The status of the OCM2 module. This status represents the status of the OCM2 module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.26.2.1.6 | Columnocm2LastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.26.2.1.7 | Columnocm2AvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.26.2.1.8 | Columnocm2ErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.26.3 | Tableocm2CntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.26.3.1 | Rowocm2CntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.26.3.1.1 | Columnocm2CntrLocation | read-only | mandatory | The location of the OCM2 card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OCM2 card… |
| 1.3.6.1.4.1.4253.2.1.26.3.1.2 | Columnocm2CntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OCM2 card… |
| 1.3.6.1.4.1.4253.2.1.26.3.1.3 | Columnocm2CntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.26.3.1.4 | Columnocm2CntrType | read-only | mandatory | The type of the software counter data in this row. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.5 | Columnocm2TotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.6 | Columnocm2TotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.7 | Columnocm2TotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.8 | Columnocm2BadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.9 | Columnocm2BytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.10 | Columnocm2BytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.11 | Columnocm2MsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.26.3.1.12 | Columnocm2ClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.26.4 | Tableocm2PmTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.26.4.1 | Rowocm2PmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.26.4.1.1 | Columnocm2PmLocation | read-only | mandatory | The location of the OCM2 card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OCM2 card… |
| 1.3.6.1.4.1.4253.2.1.26.4.1.2 | Columnocm2PmShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OCM2 card… |
| 1.3.6.1.4.1.4253.2.1.26.4.1.3 | Columnocm2PmSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.26.4.1.4 | Columnocm2PmLink | read-only | mandatory | The link for which statistics are for. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.5 | Columnocm2PmLinkRxPwr | read-only | mandatory | Link receive power. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.6 | Columnocm2PmLinkTxPwr | read-only | mandatory | Link transmit power. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.7 | Columnocm2PmCpeRxPwr | read-only | mandatory | CPE receive power. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.8 | Columnocm2PmCpeTxPwr | read-only | mandatory | CPE transmit power. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.9 | Columnocm2PmNumLinkRxIntervals | read-only | mandatory | The of intervals (seconds) over which the link Rx statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.10 | Columnocm2PmLinkRxErrors | read-only | mandatory | Link receive errors. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.11 | Columnocm2PmLinkRxErredSeconds | read-only | mandatory | Link receive errored seconds. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.12 | Columnocm2PmNumCpeRxIntervals | read-only | mandatory | The of intervals (seconds) over which the CPE Rx statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.13 | Columnocm2PmCpeRxErrors | read-only | mandatory | CPE receive errors. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.14 | Columnocm2PmCpeRxErredSeconds | read-only | mandatory | CPE receive errored seconds. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.15 | Columnocm2PmNumCpeTxIntervals | read-only | mandatory | The of intervals (seconds) over which the CPE Tx statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.16 | Columnocm2PmCpeTxErrors | read-only | mandatory | CPE transmit errors. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.17 | Columnocm2PmCpeTxErredSeconds | read-only | mandatory | CPE transmit errored seconds. |
| 1.3.6.1.4.1.4253.2.1.26.4.1.18 | Columnocm2ClearPmCntrs | read-write | mandatory | If the value is reset, all PM counters for this port are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.27 | NodeoscPerf | |||
| 1.3.6.1.4.1.4253.2.1.27.1 | ScalaroscNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OSC modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.27.2 | TableoscPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each OSC module. |
| 1.3.6.1.4.1.4253.2.1.27.2.1 | RowoscPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.27.2.1.1 | ColumnoscPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.27.2.1.2 | ColumnoscPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.27.2.1.3 | ColumnoscPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.27.2.1.4 | ColumnoscPerfState | read-only | mandatory | The state of the OSC module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.27.2.1.5 | ColumnoscPerfStatus | read-only | mandatory | The status of the OSC module. This status represents the status of the OSC module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.27.2.1.6 | ColumnoscLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.27.2.1.7 | ColumnoscAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.27.2.1.8 | ColumnoscErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.27.3 | TableoscCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.27.3.1 | RowoscCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.27.3.1.1 | ColumnoscCntrLocation | read-only | mandatory | The location of the OSC card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OSC cards. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.2 | ColumnoscCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OSC cards. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.3 | ColumnoscCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.27.3.1.4 | ColumnoscCntrType | read-only | mandatory | The type of the software counter data in this row. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.5 | ColumnoscTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.6 | ColumnoscTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.7 | ColumnoscTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.8 | ColumnoscBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.9 | ColumnoscBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.10 | ColumnoscBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.11 | ColumnoscMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.27.3.1.12 | ColumnoscClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.27.4 | TableoscPmTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.27.4.1 | RowoscPmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.27.4.1.1 | ColumnoscPmLocation | read-only | mandatory | The location of the OSC card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OSC cards. |
| 1.3.6.1.4.1.4253.2.1.27.4.1.2 | ColumnoscPmShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OSC cards. |
| 1.3.6.1.4.1.4253.2.1.27.4.1.3 | ColumnoscPmSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.27.4.1.4 | ColumnoscPmErrors | read-only | mandatory | The number of packets errors since port last came online. |
| 1.3.6.1.4.1.4253.2.1.27.4.1.5 | ColumnoscPmErredSecs | read-only | mandatory | The number of erred seconds since port last came online. |
| 1.3.6.1.4.1.4253.2.1.27.4.1.6 | ColumnoscStartTime | read-only | mandatory | The date/time the port came last online. |
| 1.3.6.1.4.1.4253.2.1.27.4.1.7 | ColumnoscClearPmCntrs | read-write | mandatory | If the value is reset, all PM counters for this port are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.28 | Nodeocm4gPerf | |||
| 1.3.6.1.4.1.4253.2.1.28.1 | Scalarocm4gNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OCM4G modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.28.2 | Tableocm4gPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each OCM4G module. |
| 1.3.6.1.4.1.4253.2.1.28.2.1 | Rowocm4gPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.28.2.1.1 | Columnocm4gPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.28.2.1.2 | Columnocm4gPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.28.2.1.3 | Columnocm4gPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.28.2.1.4 | Columnocm4gPerfState | read-only | mandatory | The state of the OCM4G module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.28.2.1.5 | Columnocm4gPerfStatus | read-only | mandatory | The status of the OCM4G module. This status represents the status of the OCM4G module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.28.2.1.6 | Columnocm4gLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.28.2.1.7 | Columnocm4gAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.28.2.1.8 | Columnocm4gErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.28.3 | Tableocm4gCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.28.3.1 | Rowocm4gCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.28.3.1.1 | Columnocm4gCntrLocation | read-only | mandatory | The location of the OCM4G card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OCM4G ca… |
| 1.3.6.1.4.1.4253.2.1.28.3.1.2 | Columnocm4gCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OCM4G car… |
| 1.3.6.1.4.1.4253.2.1.28.3.1.3 | Columnocm4gCntrSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.28.3.1.4 | Columnocm4gCntrType | read-only | mandatory | The type of the software counter data in this row. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.5 | Columnocm4gTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.6 | Columnocm4gTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.7 | Columnocm4gTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.8 | Columnocm4gBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.9 | Columnocm4gBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.10 | Columnocm4gBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.11 | Columnocm4gMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.1.28.3.1.12 | Columnocm4gClearCntrs | read-write | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.28.4 | Tableocm4gPmTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.28.4.1 | Rowocm4gPmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.28.4.1.1 | Columnocm4gPmLocation | read-only | mandatory | The location of the OCM4G card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OCM4G ca… |
| 1.3.6.1.4.1.4253.2.1.28.4.1.2 | Columnocm4gPmShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OCM4G car… |
| 1.3.6.1.4.1.4253.2.1.28.4.1.3 | Columnocm4gPmSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.28.4.1.4 | Columnocm4gPmLink | read-only | mandatory | The link for which statistics are for. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.5 | Columnocm4gPmLinkRxPwr | read-only | mandatory | Link receive power. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.6 | Columnocm4gPmLinkTxPwr | read-only | mandatory | Link transmit power. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.7 | Columnocm4gPmCpeRxPwr | read-only | mandatory | CPE receive power. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.8 | Columnocm4gPmCpeTxPwr | read-only | mandatory | CPE transmit power. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.9 | Columnocm4gPmNumLinkRxIntervals | read-only | mandatory | The of intervals (seconds) over which the link Rx statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.10 | Columnocm4gPmLinkRxErrors | read-only | mandatory | Link receive errors. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.11 | Columnocm4gPmLinkRxErredSeconds | read-only | mandatory | Link receive errored seconds. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.12 | Columnocm4gPmNumCpeRxIntervals | read-only | mandatory | The of intervals (seconds) over which the CPE Rx statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.13 | Columnocm4gPmCpeRxErrors | read-only | mandatory | CPE receive errors. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.14 | Columnocm4gPmCpeRxErredSeconds | read-only | mandatory | CPE receive errored seconds. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.15 | Columnocm4gPmNumCpeTxIntervals | read-only | mandatory | The of intervals (seconds) over which the CPE Tx statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.16 | Columnocm4gPmCpeTxErrors | read-only | mandatory | CPE transmit errors. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.17 | Columnocm4gPmCpeTxErredSeconds | read-only | mandatory | CPE transmit errored seconds. |
| 1.3.6.1.4.1.4253.2.1.28.4.1.18 | Columnocm4gClearPmCntrs | read-write | mandatory | If the value is reset, all PM counters for this port are reset to zero. A get on this will always return other |
| 1.3.6.1.4.1.4253.2.1.29 | NodeoetPerf | |||
| 1.3.6.1.4.1.4253.2.1.29.1 | ScalaroetNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OET modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.29.2 | TableoetPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each OET module. |
| 1.3.6.1.4.1.4253.2.1.29.2.1 | RowoetPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.29.2.1.1 | ColumnoetPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.29.2.1.2 | ColumnoetPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.29.2.1.3 | ColumnoetPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.29.2.1.4 | ColumnoetPerfState | read-only | mandatory | The state of the OET module. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.1.29.2.1.5 | ColumnoetPerfStatus | read-only | mandatory | The status of the OET module. This status represents the status of the OET module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.29.2.1.6 | ColumnoetLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.29.2.1.7 | ColumnoetAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.29.2.1.8 | ColumnoetErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.29.3 | TableoetPmLinkTable | not-accessible | mandatory | This table represents the information for each entry for the OET Link ports. |
| 1.3.6.1.4.1.4253.2.1.29.3.1 | RowoetPmLinkEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.29.3.1.1 | ColumnoetPmLinkLocation | read-only | mandatory | The location of the OET card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OET cards. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.2 | ColumnoetPmLinkShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OET cards. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.3 | ColumnoetPmLinkSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.29.3.1.4 | ColumnoetPmLink | read-only | mandatory | The link for which the statistics are for. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.5 | ColumnoetPmLinkNumIntervals | read-only | mandatory | The of intervals (seconds) over which the link statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.6 | ColumnoetPmLinkRxPwr | read-only | mandatory | Link receive power. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.7 | ColumnoetPmLinkRxBytes | read-only | mandatory | Link Rx Bytes. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.8 | ColumnoetPmLinkRxFcsErrs | read-only | mandatory | Link Rx FCS Errors. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.9 | ColumnoetPmLinkTxPwr | read-only | mandatory | Link Tx power. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.10 | ColumnoetPmLinkTxTemp | read-only | mandatory | Pump temp in C |
| 1.3.6.1.4.1.4253.2.1.29.3.1.11 | ColumnoetPmLinkTxBytes | read-only | mandatory | Link Tx Bytes. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.12 | ColumnoetPmLinkFecTx | read-only | mandatory | FEC Link Tx. |
| 1.3.6.1.4.1.4253.2.1.29.3.1.13 | ColumnoetPmLinkFecCorrected1s | read-only | mandatory | FEC Corrected '1's |
| 1.3.6.1.4.1.4253.2.1.29.3.1.14 | ColumnoetPmLinkFecCorrected0s | read-only | mandatory | FEC Corrected '0's |
| 1.3.6.1.4.1.4253.2.1.29.3.1.15 | ColumnoetPmLinkFecCorrectedBit | read-only | mandatory | FEC Corrected Bits |
| 1.3.6.1.4.1.4253.2.1.29.3.1.16 | ColumnoetPmLinkFecCorrectedByte | read-only | mandatory | FEC Corrected Bytes |
| 1.3.6.1.4.1.4253.2.1.29.3.1.17 | ColumnoetPmLinkFecUncorrectedByte | read-only | mandatory | FEC Uncorrected Bytes |
| 1.3.6.1.4.1.4253.2.1.29.3.1.18 | ColumnoetPmLinkFecBlock | read-only | mandatory | FEC Block Number |
| 1.3.6.1.4.1.4253.2.1.29.4 | TableoetPmPortTable | not-accessible | mandatory | This table represents the information for each entry for the OET CPE ports. |
| 1.3.6.1.4.1.4253.2.1.29.4.1 | RowoetPmPortEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.29.4.1.1 | ColumnoetPmPortLocation | read-only | mandatory | The location of the OET card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known OET cards. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.2 | ColumnoetPmPortShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) OET cards. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.3 | ColumnoetPmPortSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.29.4.1.4 | ColumnoetPmPortIndex | read-only | mandatory | Port for which the statistics are for. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.5 | ColumnoetPmPortNumIntervals | read-only | mandatory | The of intervals (seconds) over which the port statistics have been accumulated. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.6 | ColumnoetPmPortRxPwr | read-only | mandatory | Port receive power. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.7 | ColumnoetPmPortRxBytes | read-only | mandatory | Port Rx Bytes. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.8 | ColumnoetPmPortRxFcsErrs | read-only | mandatory | Port Rx FCS Errors. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.9 | ColumnoetPmPortTxPwr | read-only | mandatory | Link Tx power. |
| 1.3.6.1.4.1.4253.2.1.29.4.1.10 | ColumnoetPmPortTxTemp | read-only | mandatory | Pump temp in C |
| 1.3.6.1.4.1.4253.2.1.29.4.1.11 | ColumnoetPmPortTxBytes | read-only | mandatory | Port Tx Bytes. |
| 1.3.6.1.4.1.4253.2.1.30 | NodeuobPerf | |||
| 1.3.6.1.4.1.4253.2.1.30.1 | ScalaruobNumEvents | read-only | mandatory | Total number of all traps (events) generated by all UOB modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.30.2 | TableuobPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each UOB module. |
| 1.3.6.1.4.1.4253.2.1.30.2.1 | RowuobPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.30.2.1.1 | ColumnuobPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.30.2.1.2 | ColumnuobPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.30.2.1.3 | ColumnuobPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.30.2.1.4 | ColumnuobPerfState | read-only | mandatory | The state of the UOB module. The states are: online = 2 and offline = 3 |
| 1.3.6.1.4.1.4253.2.1.30.2.1.5 | ColumnuobPerfStatus | read-only | mandatory | This status represents the status of the UOB module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.30.2.1.6 | ColumnuobLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.30.2.1.7 | ColumnuobAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.30.2.1.8 | ColumnuobErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.1.30.3 | TableuobPmTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.1.30.3.1 | RowuobPmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.30.3.1.1 | ColumnuobPmLocation | read-only | mandatory | The location of the UOB card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known UOB cards. |
| 1.3.6.1.4.1.4253.2.1.30.3.1.2 | ColumnuobPmShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) UOB cards. |
| 1.3.6.1.4.1.4253.2.1.30.3.1.3 | ColumnuobPmSlot | read-only | mandatory | The slot within the shelf the card is in. Valid values are: 1 to 17. The system automatically determines the right value for this entry based on the known (ava… |
| 1.3.6.1.4.1.4253.2.1.30.3.1.4 | ColumnuobPmSystemStatus | read-only | mandatory | System Status |
| 1.3.6.1.4.1.4253.2.1.30.3.1.5 | ColumnuobPmPumpCurrent | read-only | mandatory | Pump Current in mA |
| 1.3.6.1.4.1.4253.2.1.30.3.1.6 | ColumnuobPmPumpTemp | read-only | mandatory | Pump temp in C |
| 1.3.6.1.4.1.4253.2.1.30.3.1.7 | ColumnuobPmInputPower | read-only | mandatory | Input pwr in dBm |
| 1.3.6.1.4.1.4253.2.1.30.3.1.8 | ColumnuobPmOutPower | read-only | mandatory | Output pwr in dBm |
| 1.3.6.1.4.1.4253.2.1.30.3.1.9 | ColumnuobPmTotalGain | read-only | mandatory | Total gain in dB |
| 1.3.6.1.4.1.4253.2.1.30.3.1.10 | ColumnuobPmReflection | read-only | mandatory | Reflection in dB |
| 1.3.6.1.4.1.4253.2.1.31 | Nodefc8gPerf | |||
| 1.3.6.1.4.1.4253.2.1.31.1 | Scalarfc8gNumEvents | read-only | mandatory | Total number of all traps (events) generated by all FC8G modules in this time slot (15 minutes). |
| 1.3.6.1.4.1.4253.2.1.31.2 | Tablefc8gPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each FC8G module. |
| 1.3.6.1.4.1.4253.2.1.31.2.1 | Rowfc8gPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.1.31.2.1.1 | Columnfc8gPerfLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.1.31.2.1.2 | Columnfc8gPerfShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.31.2.1.3 | Columnfc8gPerfSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.1.31.2.1.4 | Columnfc8gPerfState | read-only | mandatory | The state of the FC8G module. The states are: online, offline, empty or loopback. |
| 1.3.6.1.4.1.4253.2.1.31.2.1.5 | Columnfc8gPerfStatus | read-only | mandatory | The status of the FC8G module. This status represents the status of the FC8G module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.1.31.2.1.6 | Columnfc8gLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.1.31.2.1.7 | Columnfc8gAvailTime | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.1.31.2.1.8 | Columnfc8gErrFreeSecs | read-only | mandatory | The number of seconds in this time slot (15 minutes) that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2 | Nodehistorical | |||
| 1.3.6.1.4.1.4253.2.2.1 | NodesystemHist | |||
| 1.3.6.1.4.1.4253.2.2.1.1 | TablesysHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the overall system |
| 1.3.6.1.4.1.4253.2.2.1.1.1 | RowsysHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.1.1.1.1 | ColumnsysHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.1.1.1.2 | ColumnsysHLastBootTime | read-only | mandatory | The date and time of the last system boot. This time represents the boot time of a CP card. It is also anonymous with the power-up cycle of the chassis. |
| 1.3.6.1.4.1.4253.2.2.1.1.1.3 | ColumnsysHAvailTime | read-only | mandatory | The number of seconds since the system has been up and running. The criteria for the system available time is having at least one CP running with atmost non-se… |
| 1.3.6.1.4.1.4253.2.2.1.1.1.4 | ColumnsysHErrFreeSecs | read-only | mandatory | The number of seconds that the device has not experienced any alarms. This counter is across all cards in the chassis. The system must be in Normal status for … |
| 1.3.6.1.4.1.4253.2.2.2 | NodedownloadHist | |||
| 1.3.6.1.4.1.4253.2.2.2.1 | TabledlHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the download process |
| 1.3.6.1.4.1.4253.2.2.2.1.1 | RowdlHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.2.1.1.1 | ColumndlHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.2.1.1.2 | ColumndlHOkDownloads | read-only | mandatory | The number of successful downloads |
| 1.3.6.1.4.1.4253.2.2.2.1.1.3 | ColumndlHBadDownloads | read-only | mandatory | The number of failed downloads |
| 1.3.6.1.4.1.4253.2.2.2.1.1.4 | ColumndlHLongestTime | read-only | mandatory | Longest time for any download, in seconds |
| 1.3.6.1.4.1.4253.2.2.2.1.1.5 | ColumndlHLongestSize | read-only | mandatory | Longest download size for any download, in bytes |
| 1.3.6.1.4.1.4253.2.2.3 | NodecpHist | |||
| 1.3.6.1.4.1.4253.2.2.3.1 | TablecpHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the communication card |
| 1.3.6.1.4.1.4253.2.2.3.1.1 | RowcpHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.3.1.1.1 | ColumncpHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.3.1.1.2 | ColumncpHNumEvents | read-only | mandatory | Total number of events received by the active CP |
| 1.3.6.1.4.1.4253.2.2.3.1.1.3 | ColumncpHTrapsSent | read-only | mandatory | Total number of traps sent by the active CP |
| 1.3.6.1.4.1.4253.2.2.3.1.1.4 | ColumncpHSNMPCmdsRcvd | read-only | mandatory | Total number of SNMP commands received by the active CP. |
| 1.3.6.1.4.1.4253.2.2.3.2 | TablecpHCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. It is only applicable to the active MPM card. |
| 1.3.6.1.4.1.4253.2.2.3.2.1 | RowcpHCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.3.2.1.1 | ColumncpHCntrMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.2 | ColumncpHCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10. The system automatically determines the right value for this entry based on the value of the current activ… |
| 1.3.6.1.4.1.4253.2.2.3.2.1.3 | ColumncpHCntrSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the value of the current active CP card. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.4 | ColumncpHCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.5 | ColumncpHTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.6 | ColumncpHTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.7 | ColumncpHBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.8 | ColumncpHTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.9 | ColumncpHBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.10 | ColumncpHBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.11 | ColumncpHMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.12 | ColumncpHBufAllocFail | read-only | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.2.1.13 | ColumncpHEcbAllocFail | read-only | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.2.3.3 | TablecpHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each communication processor |
| 1.3.6.1.4.1.4253.2.2.3.3.1 | RowcpHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.3.3.1.1 | ColumncpHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.3.3.1.2 | ColumncpHHistShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.3.3.1.3 | ColumncpHHistSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.3.3.1.4 | ColumncpHLastBootTime | read-only | mandatory | The date and time of the last boot for this CP. |
| 1.3.6.1.4.1.4253.2.2.3.3.1.5 | ColumncpHAvailTime | read-only | mandatory | The number of seconds that this CP has been up and running. |
| 1.3.6.1.4.1.4253.2.2.3.3.1.6 | ColumncpHErrFreeSecs | read-only | mandatory | The number of seconds that this CP has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.4 | NodeccHist | |||
| 1.3.6.1.4.1.4253.2.2.4.1 | TableccHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the channel card |
| 1.3.6.1.4.1.4253.2.2.4.1.1 | RowccHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.4.1.1.1 | ColumnccHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.4.1.1.2 | ColumnccHNumEvents | read-only | mandatory | Total number of events received for all CC's |
| 1.3.6.1.4.1.4253.2.2.4.2 | TableccHCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.2.4.2.1 | RowccHCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.4.2.1.1 | ColumnccHCntrMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.2 | ColumnccHCntrLocation | read-only | mandatory | The location of the CC card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known CC cards. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.3 | ColumnccHCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10. The system automatically determines the right value for this entry based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.4 | ColumnccHCntrSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.5 | ColumnccHCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.6 | ColumnccHTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.7 | ColumnccHTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.8 | ColumnccHBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.9 | ColumnccHTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.10 | ColumnccHBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.11 | ColumnccHBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.12 | ColumnccHMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.13 | ColumnccHBufAllocFail | read-only | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.2.1.14 | ColumnccHEcbAllocFail | read-only | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.2.4.3 | TableccHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each channel card |
| 1.3.6.1.4.1.4253.2.2.4.3.1 | RowccHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.4.3.1.1 | ColumnccHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.4.3.1.2 | ColumnccHHistLocation | read-only | mandatory | The location of the card. Valid choices are Local or Remote. The system automatically selects this value based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.2.4.3.1.3 | ColumnccHHistShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.4.3.1.4 | ColumnccHHistSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.4.3.1.5 | ColumnccHLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.4.3.1.6 | ColumnccHAvailTime | read-only | mandatory | The number of seconds that this CC has been up and running. |
| 1.3.6.1.4.1.4253.2.2.4.3.1.7 | ColumnccHErrFreeSecs | read-only | mandatory | The number of seconds that this CC has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.5 | NodemuxHist | |||
| 1.3.6.1.4.1.4253.2.2.5.1 | TablemuxHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the mux/demux card |
| 1.3.6.1.4.1.4253.2.2.5.1.1 | RowmuxHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.5.1.1.1 | ColumnmuxHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.5.1.1.2 | ColumnmuxHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all MUX's. |
| 1.3.6.1.4.1.4253.2.2.5.2 | TablemuxHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each mux/demux card |
| 1.3.6.1.4.1.4253.2.2.5.2.1 | RowmuxHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.5.2.1.1 | ColumnmuxHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.5.2.1.2 | ColumnmuxHHistLocation | read-only | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.5.2.1.3 | ColumnmuxHHistShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.5.2.1.4 | ColumnmuxHHistSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.5.2.1.5 | ColumnmuxHHistType | read-only | mandatory | The type of the mux. The choices are: mux or demux. |
| 1.3.6.1.4.1.4253.2.2.5.2.1.6 | ColumnmuxHLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.5.2.1.7 | ColumnmuxHAvailTime | read-only | mandatory | The number of seconds that this Mux has been up and running. |
| 1.3.6.1.4.1.4253.2.2.5.2.1.8 | ColumnmuxHErrFreeSecs | read-only | mandatory | The number of seconds that this mux has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.6 | NodepsHist | |||
| 1.3.6.1.4.1.4253.2.2.6.1 | TablepsHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the power supply card |
| 1.3.6.1.4.1.4253.2.2.6.1.1 | RowpsHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.6.1.1.1 | ColumnpsHMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.6.1.1.2 | ColumnpsHNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all Power Supplies. |
| 1.3.6.1.4.1.4253.2.2.7 | NodefadmHist | |||
| 1.3.6.1.4.1.4253.2.2.7.1 | TablefadmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the fadm card |
| 1.3.6.1.4.1.4253.2.2.7.1.1 | RowfadmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.7.1.1.1 | ColumnfadmHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.7.1.1.2 | ColumnfadmHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all FADM's. |
| 1.3.6.1.4.1.4253.2.2.7.2 | TablefadmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each fadm card |
| 1.3.6.1.4.1.4253.2.2.7.2.1 | RowfadmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.7.2.1.1 | ColumnfadmHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.7.2.1.2 | ColumnfadmHHistLocation | read-only | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.7.2.1.3 | ColumnfadmHHistShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.7.2.1.4 | ColumnfadmHHistSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.7.2.1.6 | ColumnfadmHLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.7.2.1.7 | ColumnfadmHAvailTime | read-only | mandatory | The number of seconds that this Mux has been up and running. |
| 1.3.6.1.4.1.4253.2.2.7.2.1.8 | ColumnfadmHErrFreeSecs | read-only | mandatory | The number of seconds that this mux has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.8 | NodeoppmHist | |||
| 1.3.6.1.4.1.4253.2.2.8.1 | TableoppmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the oppm card |
| 1.3.6.1.4.1.4253.2.2.8.1.1 | RowoppmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.8.1.1.1 | ColumnoppmHMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.8.1.1.2 | ColumnoppmHNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all OPPM's. |
| 1.3.6.1.4.1.4253.2.2.8.2 | TableoppmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each fadm card |
| 1.3.6.1.4.1.4253.2.2.8.2.1 | RowoppmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.8.2.1.1 | ColumnoppmHHistMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.8.2.1.2 | ColumnoppmHHistLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.8.2.1.3 | ColumnoppmHHistShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.8.2.1.4 | ColumnoppmHHistSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.8.2.1.6 | ColumnoppmHLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.8.2.1.7 | ColumnoppmHAvailTime | not-accessible | mandatory | The number of seconds that this Mux has been up and running. |
| 1.3.6.1.4.1.4253.2.2.8.2.1.8 | ColumnoppmHErrFreeSecs | not-accessible | mandatory | The number of seconds that this mux has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.9 | NodemcmHist | |||
| 1.3.6.1.4.1.4253.2.2.9.1 | TablemcmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the channel card |
| 1.3.6.1.4.1.4253.2.2.9.1.1 | RowmcmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.9.1.1.1 | ColumnmcmHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.9.1.1.2 | ColumnmcmHNumEvents | read-only | mandatory | Total number of events received for all mcmt1's/mcme1's |
| 1.3.6.1.4.1.4253.2.2.9.2 | TablemcmHCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.2.9.2.1 | RowmcmHCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.9.2.1.1 | ColumnmcmHCntrMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.2 | ColumnmcmHCntrLocation | read-only | mandatory | The location of the mcm/mcme1 card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mcmt… |
| 1.3.6.1.4.1.4253.2.2.9.2.1.3 | ColumnmcmHCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3. The system automatically determines the right value for this entry based on the known (available) mcmt1/mcm… |
| 1.3.6.1.4.1.4253.2.2.9.2.1.4 | ColumnmcmHCntrSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) mcmt1/mcme1 cards. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.5 | ColumnmcmHCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.6 | ColumnmcmHTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.7 | ColumnmcmHTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.8 | ColumnmcmHBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.9 | ColumnmcmHTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.10 | ColumnmcmHBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.11 | ColumnmcmHBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.12 | ColumnmcmHMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.13 | ColumnmcmHBufAllocFail | read-only | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.2.1.14 | ColumnmcmHEcbAllocFail | read-only | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.2.9.3 | TablemcmPortHIntervalTable | not-accessible | mandatory | This table represents the information for each entry for the mcmt1/mcme1 port counters. |
| 1.3.6.1.4.1.4253.2.2.9.3.1 | RowmcmPortHIntervalEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.9.3.1.1 | ColumnmcmPortHIntervalLocation | read-only | mandatory | The location of the mcm/mcme1 card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mcm/… |
| 1.3.6.1.4.1.4253.2.2.9.3.1.2 | ColumnmcmPortHIntervalShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3. The system automatically determines the right value for this entry based on the known (available) mcmt1/mcm… |
| 1.3.6.1.4.1.4253.2.2.9.3.1.3 | ColumnmcmPortHIntervalSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) mcmt1/mcme1 cards. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.4 | ColumnmcmPortHIntervalPort | read-only | mandatory | The port within the shelf the card is in. Valid values are: 1 to 4. The system automatically determines the right value for this entry based on the known (avai… |
| 1.3.6.1.4.1.4253.2.2.9.3.1.5 | ColumnmcmPortHIntervalNumber | read-only | mandatory | The Interval number of the ds1 port. Valid values are: 1 to 96. The system automatically determines the right value for this entry based on the known (availabl… |
| 1.3.6.1.4.1.4253.2.2.9.3.1.6 | ColumnmcmPortHIntervalASs | read-only | mandatory | MCMT1/MCME1 port's ASs counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.7 | ColumnmcmPortHIntervalFrameASs | not-accessible | mandatory | MCMT1/MCME1 port's FrameASs counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.8 | ColumnmcmPortHIntervalFEs | read-only | mandatory | MCMT1/MCME1 port's FEs counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.9 | ColumnmcmPortHIntervalCRCErrs | read-only | mandatory | MCMT1/MCME1 port's CRC errs counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.10 | ColumnmcmPortHIntervalSESs | read-only | mandatory | MCMT1/MCME1 port's SESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.11 | ColumnmcmPortHIntervalSEFSs | read-only | mandatory | MCMT1/MCME1 port's SEFSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.12 | ColumnmcmPortHIntervalUASs | read-only | mandatory | MCMT1/MCME1 port's UASs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.13 | ColumnmcmPortHIntervalLESs | read-only | mandatory | MCMT1/MCME1 port's LESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.14 | ColumnmcmPortHIntervalBESs | read-only | mandatory | MCMT1/MCME1 port's BESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.15 | ColumnmcmPortHIntervalDMs | read-only | mandatory | MCMT1/MCME1 port's DMSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.3.1.16 | ColumnmcmPortHIntervalLCVs | read-only | mandatory | MCMT1/MCME1 port's LCVs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.4 | TablemcmPortHTotalTable | not-accessible | mandatory | This table represents the information for each entry for the mcmt1/mcme1 port counters. |
| 1.3.6.1.4.1.4253.2.2.9.4.1 | RowmcmPortHTotalEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.9.4.1.1 | ColumnmcmPortHTotalLocation | read-only | mandatory | The location of the mcm card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mcm/mcme1 … |
| 1.3.6.1.4.1.4253.2.2.9.4.1.2 | ColumnmcmPortHTotalShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3. The system automatically determines the right value for this entry based on the known (available) mcmt1/mcm… |
| 1.3.6.1.4.1.4253.2.2.9.4.1.3 | ColumnmcmPortHTotalSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) mcmt1/mcme1 cards. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.4 | ColumnmcmPortHTotalPort | read-only | mandatory | The port within the shelf the card is in. Valid values are: 1 to 4. The system automatically determines the right value for this entry based on the known (avai… |
| 1.3.6.1.4.1.4253.2.2.9.4.1.5 | ColumnmcmPortHTotalASs | read-only | mandatory | MCMT1/MCME1 port's ASs counter for the last 24 hrs. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.6 | ColumnmcmPortHTotalFrameASs | not-accessible | mandatory | MCMT1/MCME1 port's FrameASs counter for the last 24 hrs. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.7 | ColumnmcmPortHTotalFEs | read-only | mandatory | MCMT1/MCME1 port's FEs counter for the last 24 hrs. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.8 | ColumnmcmPortHTotalCRCErrs | read-only | mandatory | MCMT1/MCME1 port's CRC errs counter for the last 24 hrs. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.9 | ColumnmcmPortHTotalSESs | read-only | mandatory | MCMT1/MCME1 port's SESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.10 | ColumnmcmPortHTotalSEFSs | read-only | mandatory | MCMT1/MCME1 port's SEFSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.11 | ColumnmcmPortHTotalUASs | read-only | mandatory | MCMT1/MCME1 port's UASs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.12 | ColumnmcmPortHTotalLESs | read-only | mandatory | MCMT1/MCME1 port's LESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.13 | ColumnmcmPortHTotalBESs | read-only | mandatory | MCMT1/MCME1 port's BESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.14 | ColumnmcmPortHTotalDMs | read-only | mandatory | MCMT1/MCME1 port's DMSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.9.4.1.15 | ColumnmcmPortHTotalLCVs | read-only | mandatory | MCMT1/MCME1 port's LCVs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.2.10 | NodefnHist | |||
| 1.3.6.1.4.1.4253.2.2.10.1 | TablefnHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the fan modules |
| 1.3.6.1.4.1.4253.2.2.10.1.1 | RowfnHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.10.1.1.1 | ColumnfnHMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.10.1.1.2 | ColumnfnHNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all fan modules. |
| 1.3.6.1.4.1.4253.2.2.11 | NodecsimHist | |||
| 1.3.6.1.4.1.4253.2.2.11.1 | TablecsimHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the ColorSIM |
| 1.3.6.1.4.1.4253.2.2.11.1.1 | RowcsimHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.11.1.1.1 | ColumncsimHMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. The reason this has been made obsolete is that all colorsim related events would eventual… |
| 1.3.6.1.4.1.4253.2.2.11.1.1.2 | ColumncsimHNumEvents | not-accessible | mandatory | This variable keeps track of the number of events related to ColorSIM. The reason this has been made obsolete is that all colorsim related events would eventua… |
| 1.3.6.1.4.1.4253.2.2.11.2 | TablecsimHistIntervalTable | not-accessible | mandatory | This table represents the information for each colorsim card. |
| 1.3.6.1.4.1.4253.2.2.11.2.1 | RowcsimHistIntervalEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.11.2.1.1 | ColumncsimIntervalLocation | read-only | mandatory | Location of the ColorSIM module |
| 1.3.6.1.4.1.4253.2.2.11.2.1.2 | ColumncsimIntervalShelf | read-only | mandatory | The shelf of the ColorSIM module |
| 1.3.6.1.4.1.4253.2.2.11.2.1.3 | ColumncsimIntervalSlot | read-only | mandatory | The Slot of the ColorSIM module |
| 1.3.6.1.4.1.4253.2.2.11.2.1.4 | ColumncsimIntervalNumber | read-only | mandatory | This variable indicates the interval for which the set of statistics data is available. |
| 1.3.6.1.4.1.4253.2.2.11.2.1.5 | ColumncsimIntervalEFIs | read-only | mandatory | The counter associated with the number of Error Free Interval Counts in this interval. |
| 1.3.6.1.4.1.4253.2.2.11.2.1.6 | ColumncsimIntervalEIs | read-only | mandatory | The counter associated with the number of Errored Interval Counts in this interval. |
| 1.3.6.1.4.1.4253.2.2.11.2.1.7 | ColumncsimIntervalSEIs | read-only | mandatory | The counter associated with the number of Severely Errored Interval Counts in this interval. |
| 1.3.6.1.4.1.4253.2.2.11.2.1.8 | ColumncsimIntervalBERs | read-only | mandatory | The counter associated with the number of Bit Error Rate Counts in this interval. The unit is in the form of x.ye-z. |
| 1.3.6.1.4.1.4253.2.2.11.2.1.9 | ColumncsimIntervalUAIs | read-only | mandatory | The counter associated with the number of Unavailable Interval Counts in this interval. |
| 1.3.6.1.4.1.4253.2.2.11.2.1.10 | ColumncsimIntervalValidData | not-accessible | mandatory | This variable indicates if the data for this interval is valid. Not supported |
| 1.3.6.1.4.1.4253.2.2.11.2.1.11 | ColumncsimIntervalDateTime | read-only | mandatory | Time in seconds elasped since 01/01/1970 00:00:00 GMT for this interval. Assuming local time is same as GMT |
| 1.3.6.1.4.1.4253.2.2.12 | NoderpsmHist | |||
| 1.3.6.1.4.1.4253.2.2.12.1 | TablerpsmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the rpsm card |
| 1.3.6.1.4.1.4253.2.2.12.1.1 | RowrpsmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.12.1.1.1 | ColumnrpsmHMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.12.1.1.2 | ColumnrpsmHNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RPSM's. |
| 1.3.6.1.4.1.4253.2.2.12.2 | TablerpsmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each rpsm card |
| 1.3.6.1.4.1.4253.2.2.12.2.1 | RowrpsmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.12.2.1.1 | ColumnrpsmHHistMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.12.2.1.2 | ColumnrpsmHHistLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.12.2.1.3 | ColumnrpsmHHistShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.12.2.1.4 | ColumnrpsmHHistSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.12.2.1.6 | ColumnrpsmHLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.12.2.1.7 | ColumnrpsmHAvailTime | not-accessible | mandatory | The number of seconds that this rpsm has been up and running. |
| 1.3.6.1.4.1.4253.2.2.12.2.1.8 | ColumnrpsmHErrFreeSecs | not-accessible | mandatory | The number of seconds that this rpsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.13 | NodersdmHist | |||
| 1.3.6.1.4.1.4253.2.2.13.1 | TablersdmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the rsdm card |
| 1.3.6.1.4.1.4253.2.2.13.1.1 | RowrsdmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.13.1.1.1 | ColumnrsdmHMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.13.1.1.2 | ColumnrsdmHNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RSDM's. |
| 1.3.6.1.4.1.4253.2.2.13.2 | TablersdmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each rsdm card. |
| 1.3.6.1.4.1.4253.2.2.13.2.1 | RowrsdmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.13.2.1.1 | ColumnrsdmHHistMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.13.2.1.2 | ColumnrsdmHHistLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.13.2.1.3 | ColumnrsdmHHistShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.13.2.1.4 | ColumnrsdmHHistSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.13.2.1.6 | ColumnrsdmHLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.13.2.1.7 | ColumnrsdmHAvailTime | not-accessible | mandatory | The number of seconds that this rsdm has been up and running. |
| 1.3.6.1.4.1.4253.2.2.13.2.1.8 | ColumnrsdmHErrFreeSecs | not-accessible | mandatory | The number of seconds that this rsdm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.14 | NodertdmHist | |||
| 1.3.6.1.4.1.4253.2.2.14.1 | TablertdmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the rtdm card |
| 1.3.6.1.4.1.4253.2.2.14.1.1 | RowrtdmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.14.1.1.1 | ColumnrtdmHMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.14.1.1.2 | ColumnrtdmHNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all rtdm's. |
| 1.3.6.1.4.1.4253.2.2.14.2 | TablertdmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each rtdm card. |
| 1.3.6.1.4.1.4253.2.2.14.2.1 | RowrtdmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.14.2.1.1 | ColumnrtdmHHistMode | not-accessible | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.14.2.1.2 | ColumnrtdmHHistLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.14.2.1.3 | ColumnrtdmHHistShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.2.14.2.1.4 | ColumnrtdmHHistSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.14.2.1.5 | ColumnrtdmHLastBootTime | not-accessible | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.14.2.1.6 | ColumnrtdmHAvailTime | not-accessible | mandatory | The number of seconds that this rtdm has been up and running. |
| 1.3.6.1.4.1.4253.2.2.14.2.1.7 | ColumnrtdmHErrFreeSecs | not-accessible | mandatory | The number of seconds that this rtdm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.15 | NodeosamHist | |||
| 1.3.6.1.4.1.4253.2.2.15.1 | TableosamHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the osam module. |
| 1.3.6.1.4.1.4253.2.2.15.1.1 | RowosamHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.15.1.1.1 | ColumnosamHMode | read-only | mandatory | The mode of data collection. |
| 1.3.6.1.4.1.4253.2.2.15.1.1.2 | ColumnosamHNumEvents | read-only | mandatory | Total number of events received for all osam's. |
| 1.3.6.1.4.1.4253.2.2.15.2 | TableosamHHistTable | not-accessible | mandatory | This table represents the information for historical performance data collected for each osam module. |
| 1.3.6.1.4.1.4253.2.2.15.2.1 | RowosamHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.15.2.1.1 | ColumnosamHHistMode | read-only | mandatory | The mode of the data collection. |
| 1.3.6.1.4.1.4253.2.2.15.2.1.2 | ColumnosamHHistLocation | read-only | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.2.2.15.2.1.3 | ColumnosamHHistShelf | read-only | mandatory | The shelf number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.2.15.2.1.4 | ColumnosamHHistSlot | read-only | mandatory | The slot number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.2.15.2.1.5 | ColumnosamHHistLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.15.2.1.6 | ColumnosamHHistAvailTime | read-only | mandatory | The number of seconds since the start of this historical mode that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.15.2.1.7 | ColumnosamHHistErrFreeSecs | read-only | mandatory | The number of seconds since the start of this historical mode that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.16 | NodersmHist | |||
| 1.3.6.1.4.1.4253.2.2.16.1 | TablersmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the rsm card |
| 1.3.6.1.4.1.4253.2.2.16.1.1 | RowrsmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.16.1.1.1 | ColumnrsmHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.16.1.1.2 | ColumnrsmHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all RSM's. |
| 1.3.6.1.4.1.4253.2.2.16.2 | TablersmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each rsm card. |
| 1.3.6.1.4.1.4253.2.2.16.2.1 | RowrsmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.16.2.1.1 | ColumnrsmHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.16.2.1.2 | ColumnrsmHHistLocation | read-only | mandatory | The location of the card. |
| 1.3.6.1.4.1.4253.2.2.16.2.1.3 | ColumnrsmHHistShelf | read-only | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.16.2.1.4 | ColumnrsmHHistSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.16.2.1.6 | ColumnrsmHLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.16.2.1.7 | ColumnrsmHAvailTime | read-only | mandatory | The number of seconds that this rsm has been up and running. |
| 1.3.6.1.4.1.4253.2.2.16.2.1.8 | ColumnrsmHErrFreeSecs | read-only | mandatory | The number of seconds that this rsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.17 | NodeupsmHist | |||
| 1.3.6.1.4.1.4253.2.2.17.1 | TableupsmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the upsm card |
| 1.3.6.1.4.1.4253.2.2.17.1.1 | RowupsmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.17.1.1.1 | ColumnupsmHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.17.1.1.2 | ColumnupsmHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all UPSM's. |
| 1.3.6.1.4.1.4253.2.2.17.2 | TableupsmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each upsm card. |
| 1.3.6.1.4.1.4253.2.2.17.2.1 | RowupsmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.17.2.1.1 | ColumnupsmHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.17.2.1.2 | ColumnupsmHHistLocation | read-only | mandatory | The location of the card. |
| 1.3.6.1.4.1.4253.2.2.17.2.1.3 | ColumnupsmHHistShelf | read-only | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.17.2.1.4 | ColumnupsmHHistSlot | read-only | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.2.17.2.1.6 | ColumnupsmHLastBootTime | read-only | mandatory | The date and time of the last boot for this card. |
| 1.3.6.1.4.1.4253.2.2.17.2.1.7 | ColumnupsmHAvailTime | read-only | mandatory | The number of seconds that this upsm has been up and running. |
| 1.3.6.1.4.1.4253.2.2.17.2.1.8 | ColumnupsmHErrFreeSecs | read-only | mandatory | The number of seconds that this upsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.18 | NodemcmescHist | |||
| 1.3.6.1.4.1.4253.2.2.18.1 | TablemcmescHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the channel card |
| 1.3.6.1.4.1.4253.2.2.18.1.1 | RowmcmescHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.18.1.1.1 | ColumnmcmescHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or long term. |
| 1.3.6.1.4.1.4253.2.2.18.1.1.2 | ColumnmcmescHNumEvents | read-only | mandatory | Total number of events received for all mcmesc's |
| 1.3.6.1.4.1.4253.2.2.18.2 | TablemcmescHCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.2.18.2.1 | RowmcmescHCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.18.2.1.1 | ColumnmcmescHCntrMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or long term. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.2 | ColumnmcmescHCntrLocation | read-only | mandatory | The location of the mcmesc card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mcmesc … |
| 1.3.6.1.4.1.4253.2.2.18.2.1.3 | ColumnmcmescHCntrShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) mcmesc ca… |
| 1.3.6.1.4.1.4253.2.2.18.2.1.4 | ColumnmcmescHCntrSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) mcmesc cards. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.5 | ColumnmcmescHCntrType | read-only | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.6 | ColumnmcmescHTotPktSent | read-only | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.7 | ColumnmcmescHTotPktRcvd | read-only | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.8 | ColumnmcmescHBadPktRcvd | read-only | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.9 | ColumnmcmescHTotBadTrans | read-only | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.10 | ColumnmcmescHBytesSent | read-only | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.11 | ColumnmcmescHBytesRcvd | read-only | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.18.2.1.12 | ColumnmcmescHMsgsDlvrd | read-only | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.2.18.3 | TablemcmescPortHIntervalTable | not-accessible | mandatory | This table represents the information for each entry for the mcmesc port counters. |
| 1.3.6.1.4.1.4253.2.2.18.3.1 | RowmcmescPortHIntervalEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.18.3.1.1 | ColumnmcmescPortHIntervalLocation | read-only | mandatory | The location of the mcmesc card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mcmesc … |
| 1.3.6.1.4.1.4253.2.2.18.3.1.2 | ColumnmcmescPortHIntervalShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 3. The system automatically determines the right value for this entry based on the known (available) mcmesc ca… |
| 1.3.6.1.4.1.4253.2.2.18.3.1.3 | ColumnmcmescPortHIntervalSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) mcmesc cards. |
| 1.3.6.1.4.1.4253.2.2.18.3.1.4 | ColumnmcmescPortHIntervalPort | read-only | mandatory | The CPE port within the shelf the card is in. Valid values are: 1 to 12. The system automatically determines the right value for this entry based on the known … |
| 1.3.6.1.4.1.4253.2.2.18.3.1.5 | ColumnmcmescPortHIntervalNumber | read-only | mandatory | The interval number. Valid values are: 1 to 96, where 1 indicates the most recently completed interval. |
| 1.3.6.1.4.1.4253.2.2.18.3.1.6 | ColumnmcmescPortHIntervalDuration | read-only | mandatory | MCMESC CPE port's duration, in seconds, for specific interval. The * indicates an incomplete interval resulted from interval setting change. |
| 1.3.6.1.4.1.4253.2.2.18.3.1.7 | ColumnmcmescPortHIntervalEns | read-only | mandatory | MCMESC CPE port's enabled seconds for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.3.1.8 | ColumnmcmescPortHIntervalLoss | read-only | mandatory | MCMESC CPE port's loss of signal seconds for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.3.1.9 | ColumnmcmescPortHIntervalCrcErr | read-only | mandatory | MCMESC CPE port's CRC errs counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.3.1.10 | ColumnmcmescPortHIntervalOobErr | read-only | mandatory | MCMESC CPE port's Out-of_band error counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.3.1.11 | ColumnmcmescPortHIntervalRdpErr | read-only | mandatory | MCMESC CPE port's Running Disparity error counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.4 | TablemcmescLinkHIntervalTable | not-accessible | mandatory | This table represents the information for each entry for the mcmesc port counters. |
| 1.3.6.1.4.1.4253.2.2.18.4.1 | RowmcmescLinkHIntervalEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.18.4.1.1 | ColumnmcmescLinkHIntervalLocation | read-only | mandatory | The location of the mcmesc card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known mcmesc … |
| 1.3.6.1.4.1.4253.2.2.18.4.1.2 | ColumnmcmescLinkHIntervalShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1 to 2. The system automatically determines the right value for this entry based on the known (available) mcmesc ca… |
| 1.3.6.1.4.1.4253.2.2.18.4.1.3 | ColumnmcmescLinkHIntervalSlot | read-only | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) mcmesc cards. |
| 1.3.6.1.4.1.4253.2.2.18.4.1.4 | ColumnmcmescLinkHIntervalNumber | read-only | mandatory | The interval number. Valid values are: 1 to 96, where 1 indicates the most recently completed interval. |
| 1.3.6.1.4.1.4253.2.2.18.4.1.5 | ColumnmcmescLinkHIntervalDuration | read-only | mandatory | MCMESC link port's duration, in seconds, for specific interval. The * indicates an incomplete interval resulted from interval setting change. |
| 1.3.6.1.4.1.4253.2.2.18.4.1.6 | ColumnmcmescLinkHIntervalTsos | read-only | mandatory | MCMESC link port's test-sequence on seconds for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.4.1.7 | ColumnmcmescLinkHIntervalLoss | read-only | mandatory | MCMESC link port's loss of signal seconds for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.4.1.8 | ColumnmcmescLinkHIntervalCrcErr | read-only | mandatory | MCMESC link port's CRC errs counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.4.1.9 | ColumnmcmescLinkHIntervalOobErr | read-only | mandatory | MCMESC link port's Out-of_band error counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.4.1.10 | ColumnmcmescLinkHIntervalRdpErr | read-only | mandatory | MCMESC link port's Running Disparity error counter for specific interval. |
| 1.3.6.1.4.1.4253.2.2.18.5 | TablemcmescPortHTotalTable | not-accessible | mandatory | This table represents the information for each mcmesc cpe port's total counters of up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.5.1 | RowmcmescPortHTotalEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.18.5.1.1 | ColumnmcmescPortHTotalCardLocation | read-only | mandatory | Location of the MCMESC CPE port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.2.2.18.5.1.2 | ColumnmcmescPortHTotalCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1..2. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.3 | ColumnmcmescPortHTotalCardSlot | read-only | mandatory | The slot within the shelf the Module is in. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.4 | ColumnmcmescPortHTotalPort | read-only | mandatory | CPE port's index. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.5 | ColumnmcmescPortHTotalDuration | read-only | mandatory | MCMESC CPE port's total duration of up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.6 | ColumnmcmescPortHTotalEns | read-only | mandatory | MCMESC CPE port's total enabled seconds during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.7 | ColumnmcmescPortHTotalLoss | read-only | mandatory | MCMESC CPE port's total loss of signal seconds during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.8 | ColumnmcmescPortHTotalCrcErr | read-only | mandatory | MCMESC CPE port's total CRC error counter during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.9 | ColumnmcmescPortHTotalOobErr | read-only | mandatory | MCMESC CPE port's total Out-Of_Band error counter during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.5.1.10 | ColumnmcmescPortHTotalRdpErr | read-only | mandatory | MCMESC CPE port's total Running Disparity error counter during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.6 | TablemcmescLinkHTotalTable | not-accessible | mandatory | This table represents the information for each mcmesc cpe port's total counters of up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.6.1 | RowmcmescLinkHTotalEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.18.6.1.1 | ColumnmcmescLinkHTotalCardLocation | read-only | mandatory | Location of the MCMESC link port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.2.2.18.6.1.2 | ColumnmcmescLinkHTotalCardShelf | read-only | mandatory | The shelf the card is in. Valid values are: 1..2. |
| 1.3.6.1.4.1.4253.2.2.18.6.1.3 | ColumnmcmescLinkHTotalCardSlot | read-only | mandatory | The slot within the shelf the Module is in. |
| 1.3.6.1.4.1.4253.2.2.18.6.1.4 | ColumnmcmescLinkHTotalDuration | read-only | mandatory | MCMESC link port's total duration of up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.6.1.5 | ColumnmcmescLinkHTotalTsos | read-only | mandatory | MCMESC link port's total test-sequence on seconds during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.6.1.6 | ColumnmcmescLinkHTotalLoss | read-only | mandatory | MCMESC link port's total loss of signal seconds during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.6.1.7 | ColumnmcmescLinkHTotalCrcErr | read-only | mandatory | MCMESC link port's total CRC error counter during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.6.1.8 | ColumnmcmescLinkHTotalOobErr | read-only | mandatory | MCMESC link port's total Out-Of_Band error counter during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.18.6.1.9 | ColumnmcmescLinkHTotalRdpErr | read-only | mandatory | MCMESC link port's total Running Disparity error counter during up to 96 intervals. |
| 1.3.6.1.4.1.4253.2.2.19 | NodetapHist | |||
| 1.3.6.1.4.1.4253.2.2.19.1 | TabletapHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the TAP module. |
| 1.3.6.1.4.1.4253.2.2.19.1.1 | RowtapHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.19.1.1.1 | ColumntapHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.19.1.1.2 | ColumntapHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all TAP modules. |
| 1.3.6.1.4.1.4253.2.2.19.2 | TabletapHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each TAP module |
| 1.3.6.1.4.1.4253.2.2.19.2.1 | RowtapHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.19.2.1.1 | ColumntapHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.19.2.1.2 | ColumntapHHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.19.2.1.3 | ColumntapHHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.19.2.1.4 | ColumntapHHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.19.2.1.5 | ColumntapHHistType | read-only | mandatory | Module type. |
| 1.3.6.1.4.1.4253.2.2.19.2.1.6 | ColumntapHLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.19.2.1.7 | ColumntapHAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.19.2.1.8 | ColumntapHErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.20 | NodevoadmHist | |||
| 1.3.6.1.4.1.4253.2.2.20.1 | TablevoadmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the VOADM module. |
| 1.3.6.1.4.1.4253.2.2.20.1.1 | RowvoadmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.20.1.1.1 | ColumnvoadmHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.20.1.1.2 | ColumnvoadmHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all VOADM modules. |
| 1.3.6.1.4.1.4253.2.2.20.2 | TablevoadmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each VOADM module |
| 1.3.6.1.4.1.4253.2.2.20.2.1 | RowvoadmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.20.2.1.1 | ColumnvoadmHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.20.2.1.2 | ColumnvoadmHHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.20.2.1.3 | ColumnvoadmHHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.20.2.1.4 | ColumnvoadmHHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.20.2.1.5 | ColumnvoadmHHistType | read-only | mandatory | Module type. |
| 1.3.6.1.4.1.4253.2.2.20.2.1.6 | ColumnvoadmHLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.20.2.1.7 | ColumnvoadmHAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.20.2.1.8 | ColumnvoadmHErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.21 | NodedmmHist | |||
| 1.3.6.1.4.1.4253.2.2.21.1 | TabledmmHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the DMM module. |
| 1.3.6.1.4.1.4253.2.2.21.1.1 | RowdmmHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.21.1.1.1 | ColumndmmHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.21.1.1.2 | ColumndmmHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all DMM modules. |
| 1.3.6.1.4.1.4253.2.2.21.2 | TabledmmHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each DMM module |
| 1.3.6.1.4.1.4253.2.2.21.2.1 | RowdmmHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.21.2.1.1 | ColumndmmHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.21.2.1.2 | ColumndmmHHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.21.2.1.3 | ColumndmmHHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.21.2.1.4 | ColumndmmHHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.21.2.1.5 | ColumndmmHLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.21.2.1.6 | ColumndmmHAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.21.2.1.7 | ColumndmmHErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.22 | Nodeocm10gfHist | |||
| 1.3.6.1.4.1.4253.2.2.22.1 | Tableocm10gfHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the OCM10GF module. |
| 1.3.6.1.4.1.4253.2.2.22.1.1 | Rowocm10gfHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.22.1.1.1 | Columnocm10gfHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.22.1.1.2 | Columnocm10gfHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OCM10GF modules. |
| 1.3.6.1.4.1.4253.2.2.22.2 | Tableocm10gfHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each OCM10GF module |
| 1.3.6.1.4.1.4253.2.2.22.2.1 | Rowocm10gfHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.22.2.1.1 | Columnocm10gfHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.22.2.1.2 | Columnocm10gfHHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.22.2.1.3 | Columnocm10gfHHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.22.2.1.4 | Columnocm10gfHHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.22.2.1.5 | Columnocm10gfHLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.22.2.1.6 | Columnocm10gfHAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.22.2.1.7 | Columnocm10gfHErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.23 | Nodeocm2Hist | |||
| 1.3.6.1.4.1.4253.2.2.23.1 | Tableocm2HistTable | not-accessible | mandatory | This table represents the information for historical data collected for the OCM2 module. |
| 1.3.6.1.4.1.4253.2.2.23.1.1 | Rowocm2HistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.23.1.1.1 | Columnocm2HMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.23.1.1.2 | Columnocm2HNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OCM2 modules. |
| 1.3.6.1.4.1.4253.2.2.23.2 | Tableocm2HHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each OCM2 module |
| 1.3.6.1.4.1.4253.2.2.23.2.1 | Rowocm2HHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.23.2.1.1 | Columnocm2HHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.23.2.1.2 | Columnocm2HHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.23.2.1.3 | Columnocm2HHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.23.2.1.4 | Columnocm2HHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.23.2.1.5 | Columnocm2HLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.23.2.1.6 | Columnocm2HAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.23.2.1.7 | Columnocm2HErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.24 | NodeoscHist | |||
| 1.3.6.1.4.1.4253.2.2.24.1 | TableoscHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the OSC module. |
| 1.3.6.1.4.1.4253.2.2.24.1.1 | RowoscHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.24.1.1.1 | ColumnoscHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.24.1.1.2 | ColumnoscHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OSC modules. |
| 1.3.6.1.4.1.4253.2.2.24.2 | TableoscHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each OSC module |
| 1.3.6.1.4.1.4253.2.2.24.2.1 | RowoscHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.24.2.1.1 | ColumnoscHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.24.2.1.2 | ColumnoscHHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.24.2.1.3 | ColumnoscHHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.24.2.1.4 | ColumnoscHHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.24.2.1.5 | ColumnoscHLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.24.2.1.6 | ColumnoscHAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.24.2.1.7 | ColumnoscHErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.25 | Nodeocm4gHist | |||
| 1.3.6.1.4.1.4253.2.2.25.1 | Tableocm4gHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the OCM4G module. |
| 1.3.6.1.4.1.4253.2.2.25.1.1 | Rowocm4gHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.25.1.1.1 | Columnocm4gHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.25.1.1.2 | Columnocm4gHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all OCM4G modules. |
| 1.3.6.1.4.1.4253.2.2.25.2 | Tableocm4gHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each OCM4G module |
| 1.3.6.1.4.1.4253.2.2.25.2.1 | Rowocm4gHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.25.2.1.1 | Columnocm4gHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.25.2.1.2 | Columnocm4gHHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.25.2.1.3 | Columnocm4gHHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.25.2.1.4 | Columnocm4gHHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.25.2.1.5 | Columnocm4gHLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.25.2.1.6 | Columnocm4gHAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.25.2.1.7 | Columnocm4gHErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.2.26 | NodeoetHist | |||
| 1.3.6.1.4.1.4253.2.2.27 | NodeuobHist | |||
| 1.3.6.1.4.1.4253.2.2.27.1 | TableuobHistTable | not-accessible | mandatory | This table represents the information for historical data collected for the UOB module. |
| 1.3.6.1.4.1.4253.2.2.27.1.1 | RowuobHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.27.1.1.1 | ColumnuobHMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.27.1.1.2 | ColumnuobHNumEvents | read-only | mandatory | Total number of all traps (events) generated by all UOB modules. |
| 1.3.6.1.4.1.4253.2.2.27.2 | TableuobHHistTable | not-accessible | mandatory | This table represents the information for performance data collected for each UOB module |
| 1.3.6.1.4.1.4253.2.2.27.2.1 | RowuobHHistEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.2.27.2.1.1 | ColumnuobHHistMode | read-only | mandatory | The mode of the data collection. Valid values are: daily or longterm. |
| 1.3.6.1.4.1.4253.2.2.27.2.1.2 | ColumnuobHHistLocation | read-only | mandatory | The location of the module. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.2.27.2.1.3 | ColumnuobHHistShelf | read-only | mandatory | The shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.27.2.1.4 | ColumnuobHHistSlot | read-only | mandatory | The slot within the shelf the module is in. |
| 1.3.6.1.4.1.4253.2.2.27.2.1.5 | ColumnuobHLastBootTime | read-only | mandatory | The date and time of the last boot for this module. |
| 1.3.6.1.4.1.4253.2.2.27.2.1.6 | ColumnuobHAvailTime | read-only | mandatory | The number of seconds that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.2.27.2.1.7 | ColumnuobHErrFreeSecs | read-only | mandatory | The number of seconds that this module has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3 | NodespecialConditions | |||
| 1.3.6.1.4.1.4253.2.3.1 | NodesystemCond | |||
| 1.3.6.1.4.1.4253.2.3.1.1 | ScalarsysCStatus | not-accessible | mandatory | The global status of the system as computed based on the traps (events) that are generated. Choices are: Critical, Major, Minor or Normal. |
| 1.3.6.1.4.1.4253.2.3.1.2 | ScalarsysCSetMode | not-accessible | mandatory | If on, the special conditions counters will be activated. These counters continue counting until the mode is off. On startup, this flag is off. |
| 1.3.6.1.4.1.4253.2.3.1.3 | ScalarsysCAvailTime | not-accessible | mandatory | The number of seconds since this mode is started that the system has been up and running. The Criteria for the system available time is having at least one CP … |
| 1.3.6.1.4.1.4253.2.3.1.4 | ScalarsysCErrFreeSecs | not-accessible | mandatory | The number of seconds since this mode is started that the device has not experienced any alarms. This counter is across all cards in the chassis. The system mu… |
| 1.3.6.1.4.1.4253.2.3.2 | NodedownloadCond | |||
| 1.3.6.1.4.1.4253.2.3.2.1 | ScalardlCStatus | not-accessible | mandatory | The global status of the download task. The download task (download to the device) is either ftp-inprogress, module update inprogress or currently idle. Since … |
| 1.3.6.1.4.1.4253.2.3.2.2 | ScalardlCOkDownloads | not-accessible | mandatory | The number of successful downloads in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.3.2.3 | ScalardlCBadDownloads | not-accessible | mandatory | The number of failed downloads in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.3.2.4 | ScalardlCLongestTime | not-accessible | mandatory | Longest time for any download, in seconds, in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.3.2.5 | ScalardlCLongestSize | not-accessible | mandatory | Longest download size for any download, in bytes, in this time interval (15 minutes). |
| 1.3.6.1.4.1.4253.2.3.2.6 | ScalardlCCounterFlag | not-accessible | mandatory | Turns software counters On or Off. |
| 1.3.6.1.4.1.4253.2.3.3 | NodecpCond | |||
| 1.3.6.1.4.1.4253.2.3.3.1 | ScalarcpCNumEvents | not-accessible | mandatory | Total number of events received by the active CP since this mode was activated. |
| 1.3.6.1.4.1.4253.2.3.3.2 | ScalarcpCTrapsSent | not-accessible | mandatory | Total number of traps sent by the active CP since this mode was activated. |
| 1.3.6.1.4.1.4253.2.3.3.3 | ScalarcpCSNMPCmdsRcvd | not-accessible | mandatory | Total number of SNMP commands received by the active CP since this mode was activated. |
| 1.3.6.1.4.1.4253.2.3.3.4 | ScalarcpCCounterFlag | not-accessible | mandatory | Turns software counters On or Off. |
| 1.3.6.1.4.1.4253.2.3.3.5 | TablecpCCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. It is only applicable to the active MPM card. |
| 1.3.6.1.4.1.4253.2.3.3.5.1 | RowcpCCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.3.5.1.1 | ColumncpCCntrShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10. The system automatically determines the right value for this entry based on the value of the current activ… |
| 1.3.6.1.4.1.4253.2.3.3.5.1.2 | ColumncpCCntrSlot | not-accessible | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the value of the current active CP card. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.3 | ColumncpCCntrType | not-accessible | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.4 | ColumncpCTotPktSent | not-accessible | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.5 | ColumncpCTotPktRcvd | not-accessible | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.6 | ColumncpCBadPktRcvd | not-accessible | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.7 | ColumncpCTotBadTrans | not-accessible | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.8 | ColumncpCBytesSent | not-accessible | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.9 | ColumncpCBytesRcvd | not-accessible | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.10 | ColumncpCMsgsDlvrd | not-accessible | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.11 | ColumncpCBufAllocFail | not-accessible | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.5.1.12 | ColumncpCEcbAllocFail | not-accessible | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.3.3.6 | TablecpCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each communication processor |
| 1.3.6.1.4.1.4253.2.3.3.6.1 | RowcpCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.3.6.1.1 | ColumncpCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.3.6.1.2 | ColumncpCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.3.6.1.3 | ColumncpCPerfMode | not-accessible | mandatory | The valid types are: active CP or standby CP |
| 1.3.6.1.4.1.4253.2.3.3.6.1.4 | ColumncpCPerfState | not-accessible | mandatory | The state of the communication card. The states are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.3.3.6.1.5 | ColumncpCPerfStatus | not-accessible | mandatory | The status of the communication processor. This status represents the state of the communication processor and in general is different from the status of the s… |
| 1.3.6.1.4.1.4253.2.3.3.6.1.7 | ColumncpCAvailTime | not-accessible | mandatory | The number of seconds since this mode is started that this CP has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.3.6.1.8 | ColumncpCErrFreeSecs | not-accessible | mandatory | The number of seconds since this mode is started that this CP has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.4 | NodeccCond | |||
| 1.3.6.1.4.1.4253.2.3.4.1 | ScalarccCNumEvents | not-accessible | mandatory | Total number of events received for all CC's since this mode was started. |
| 1.3.6.1.4.1.4253.2.3.4.2 | TableccCCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.3.4.2.1 | RowccCCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.4.2.1.1 | ColumnccCCntrLocation | not-accessible | mandatory | The location of the CC card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known CC cards. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.2 | ColumnccCCntrShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10. The system automatically determines the right value for this entry based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.3 | ColumnccCCntrSlot | not-accessible | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.4 | ColumnccCCntrType | not-accessible | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.5 | ColumnccCCounterFlag | not-accessible | mandatory | Turns software counters, both On or both Off for this CC. When Off Clears both counters Statistic information |
| 1.3.6.1.4.1.4253.2.3.4.2.1.6 | ColumnccCTotPktSent | not-accessible | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.7 | ColumnccCTotPktRcvd | not-accessible | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.8 | ColumnccCBadPktRcvd | not-accessible | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.9 | ColumnccCTotBadTrans | not-accessible | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.10 | ColumnccCBytesSent | not-accessible | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.11 | ColumnccCBytesRcvd | not-accessible | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.12 | ColumnccCMsgsDlvrd | not-accessible | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.13 | ColumnccCBufAllocFail | not-accessible | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.14 | ColumnccCEcbAllocFail | not-accessible | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.3.4.2.1.15 | ColumnccCClearCntrs | not-accessible | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other. |
| 1.3.6.1.4.1.4253.2.3.4.3 | TableccCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each channel card. |
| 1.3.6.1.4.1.4253.2.3.4.3.1 | RowccCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.4.3.1.1 | ColumnccCPerfLocation | not-accessible | mandatory | The location of the card. Valid choices are Local or Remote. The system automatically selects this value based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.2 | ColumnccCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.4.3.1.3 | ColumnccCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.4 | ColumnccCPerfState | not-accessible | mandatory | The state of the channel card. The states' are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.5 | ColumnccCPerfStatus | not-accessible | mandatory | The status of the channel card. This status represents the status of the communication processor and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.6 | ColumnccCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this CC has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.4.3.1.7 | ColumnccCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this CC has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.8 | ColumnccCBiasCurrent | not-accessible | mandatory | Bias current for the optical laser. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.9 | ColumnccCModulation | not-accessible | mandatory | The frequency modulation for the optical laser. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.10 | ColumnccCApc | not-accessible | mandatory | The APC value. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.11 | ColumnccCIwmModulation | not-accessible | mandatory | The frequency modulation for the IWM channel. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.12 | ColumnccCLaserOnOff | not-accessible | mandatory | The laser On/Off flag. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.13 | ColumnccCTemperature | not-accessible | mandatory | The current temperature, or the operating temperature of the optical device. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.14 | ColumnccCIntensity | not-accessible | mandatory | The intensity of the optical light. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.15 | ColumnccCSignalStrength | not-accessible | mandatory | The current signal strength for the optical path. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.16 | ColumnccCLossOfLight | not-accessible | mandatory | If set to true, no laser light is present. If set to false, no loss of light has occurred. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.17 | ColumnccCSignalDetect | not-accessible | mandatory | If set to true, signal is detected. If set to false, no signal is present. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.18 | ColumnccCRefClock | not-accessible | mandatory | The value of the reference clock in decimal notation. For a given value, like 1660, the actual value is 16.60-EN. In otherwords, assume a two digit decimal poi… |
| 1.3.6.1.4.1.4253.2.3.4.3.1.19 | ColumnccCClockDiv | not-accessible | mandatory | The clock divisor. Values are 1250, 622 or 155 in the appropriate clock frequency scale. |
| 1.3.6.1.4.1.4253.2.3.4.3.1.20 | ColumnccCProtectionMode | not-accessible | mandatory | UPSR Protection Mode: active, standby and na. |
| 1.3.6.1.4.1.4253.2.3.5 | NodemuxCond | |||
| 1.3.6.1.4.1.4253.2.3.5.1 | ScalarmuxCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all MUX's since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.5.2 | TablemuxCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each mux/demux card |
| 1.3.6.1.4.1.4253.2.3.5.2.1 | RowmuxCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.5.2.1.1 | ColumnmuxCPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.3.5.2.1.2 | ColumnmuxCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.5.2.1.3 | ColumnmuxCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.5.2.1.4 | ColumnmuxCType | not-accessible | mandatory | The type of the mux. The choices are: mux or demux. |
| 1.3.6.1.4.1.4253.2.3.5.2.1.5 | ColumnmuxCPerfState | not-accessible | mandatory | The status of the mux card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.5.2.1.6 | ColumnmuxCPerfStatus | not-accessible | mandatory | The status of the mux card. This status represents the status of the mux card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.5.2.1.7 | ColumnmuxCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this Mux has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.5.2.1.8 | ColumnmuxCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this mux has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.5.3 | ScalarmuxCCounterFlag | not-accessible | mandatory | Turns special condition software counters On or Off for this card. Default is off. |
| 1.3.6.1.4.1.4253.2.3.6 | NodepsCond | |||
| 1.3.6.1.4.1.4253.2.3.6.1 | ScalarpsCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all Power Supplies since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.6.2 | ScalarpsCVoltageLevel3pt3Volt | not-accessible | mandatory | Voltage Level of the 3.3 V power supply. Need to divide this value by ten to get the actual voltage level. |
| 1.3.6.1.4.1.4253.2.3.6.3 | ScalarpsCVoltageLevel5Volt | not-accessible | mandatory | Voltage Level of the 5 V power supply. Need to divide this value by ten to get the actual voltage level. |
| 1.3.6.1.4.1.4253.2.3.6.4 | ScalarpsCVoltageLevel12Volt | not-accessible | mandatory | Voltage Level of the 12 V power supply. Need to divide this value by ten to get the actual voltage level. |
| 1.3.6.1.4.1.4253.2.3.6.5 | TablepsCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each power supply card |
| 1.3.6.1.4.1.4253.2.3.6.5.1 | RowpsCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.6.5.1.1 | ColumnpsCPerfID | not-accessible | mandatory | The module id where ps is in. Valid values are: 1 to 4 |
| 1.3.6.1.4.1.4253.2.3.6.5.1.2 | ColumnpsCPerfType | not-accessible | mandatory | The type of the power supply card. The choices are: active (primary PS) or standby. |
| 1.3.6.1.4.1.4253.2.3.6.5.1.3 | ColumnpsCPerfState | not-accessible | mandatory | The state of the power supply card. The states are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.3.6.5.1.4 | ColumnpsCPerfStatus | not-accessible | mandatory | The status of the power supply card. This status represents the status of the ps card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.7 | NodefadmCond | |||
| 1.3.6.1.4.1.4253.2.3.7.1 | ScalarfadmCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all FADM's since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.7.2 | ScalarfadmCCounterFlag | not-accessible | mandatory | Turns software counters On or Off for this FADM. |
| 1.3.6.1.4.1.4253.2.3.7.3 | TablefadmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each fadm card |
| 1.3.6.1.4.1.4253.2.3.7.3.1 | RowfadmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.7.3.1.1 | ColumnfadmCPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.3.7.3.1.2 | ColumnfadmCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.7.3.1.3 | ColumnfadmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.7.3.1.5 | ColumnfadmCPerfState | not-accessible | mandatory | The status of the mux card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.7.3.1.6 | ColumnfadmCPerfStatus | not-accessible | mandatory | The status of the mux card. This status represents the status of the mux card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.7.3.1.7 | ColumnfadmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this Mux has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.7.3.1.8 | ColumnfadmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this mux has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.8 | NodeoppmCond | |||
| 1.3.6.1.4.1.4253.2.3.8.1 | ScalaroppmCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all OPPMs' since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.8.2 | TableoppmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each oppm card |
| 1.3.6.1.4.1.4253.2.3.8.2.1 | RowoppmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.8.2.1.1 | ColumnoppmCPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.3.8.2.1.2 | ColumnoppmCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.8.2.1.3 | ColumnoppmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.8.2.1.4 | ColumnoppmCPerfState | not-accessible | mandatory | The status of the oppm card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.8.2.1.5 | ColumnoppmCPerfStatus | not-accessible | mandatory | The status of the oppm card. This status represents the status of the oppm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.8.2.1.6 | ColumnoppmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this oppm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.8.2.1.7 | ColumnoppmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this oppm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.8.3 | ScalaroppmCCounterFlag | not-accessible | mandatory | Turns special condition software counters On or Off for this card. Default is off. |
| 1.3.6.1.4.1.4253.2.3.9 | NodemcmCond | |||
| 1.3.6.1.4.1.4253.2.3.9.1 | ScalarmcmCNumEvents | not-accessible | mandatory | Total number of events received for all MCM's since this mode was started. |
| 1.3.6.1.4.1.4253.2.3.9.2 | TablemcmCCntrTable | not-accessible | mandatory | This table represents the information for each entry for the software counters. |
| 1.3.6.1.4.1.4253.2.3.9.2.1 | RowmcmCCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.9.2.1.1 | ColumnmcmCCntrLocation | not-accessible | mandatory | The location of the MCM card. The values are: Local or Remote. The system automatically determines the right value for this entry based on the known MCM cards. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.2 | ColumnmcmCCntrShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10. The system automatically determines the right value for this entry based on the known (available) MCM card… |
| 1.3.6.1.4.1.4253.2.3.9.2.1.3 | ColumnmcmCCntrSlot | not-accessible | mandatory | The slot within the shelf the card is in. The system automatically determines the right value for this entry based on the known (available) MCM cards. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.4 | ColumnmcmCCntrType | not-accessible | mandatory | The type of the software counter data in this row. The data is collected for the SPI data channels. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.5 | ColumnmcmCCounterFlag | not-accessible | mandatory | Turns software counters On or Off for this MCM. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.6 | ColumnmcmCTotPktSent | not-accessible | mandatory | The number of data packets sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.7 | ColumnmcmCTotPktRcvd | not-accessible | mandatory | The number of data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.8 | ColumnmcmCBadPktRcvd | not-accessible | mandatory | The number of bad data packets received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.9 | ColumnmcmCTotBadTrans | not-accessible | mandatory | The number of bad data transmissions over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.10 | ColumnmcmCBytesSent | not-accessible | mandatory | Total number of bytes sent over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.11 | ColumnmcmCBytesRcvd | not-accessible | mandatory | Total number of data bytes received over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.12 | ColumnmcmCMsgsDlvrd | not-accessible | mandatory | The number of complete messages delivered over the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.13 | ColumnmcmCBufAllocFail | not-accessible | mandatory | Number of buffer allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.14 | ColumnmcmCEcbAllocFail | not-accessible | mandatory | Number of Event Control Block allocation failures for the given data channel. |
| 1.3.6.1.4.1.4253.2.3.9.2.1.15 | ColumnmcmCClearCntrs | not-accessible | mandatory | If the value is reset, all software counters for this 15 minute interval are reset to zero. A get on this will always return other. |
| 1.3.6.1.4.1.4253.2.3.9.3 | TablemcmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each channel card |
| 1.3.6.1.4.1.4253.2.3.9.3.1 | RowmcmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.9.3.1.1 | ColumnmcmCPerfLocation | not-accessible | mandatory | The location of the card. Valid choices are Local or Remote. The system automatically selects this value based on the known (available) CC cards. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.2 | ColumnmcmCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.9.3.1.3 | ColumnmcmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.4 | ColumnmcmCPerfState | not-accessible | mandatory | The state of the channel card. The states' are: online, offline, empty, loopback or diagnostics. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.5 | ColumnmcmCPerfStatus | not-accessible | mandatory | The status of the channel card. This status represents the status of the communication processor and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.6 | ColumnmcmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this CC has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.9.3.1.7 | ColumnmcmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this MCM has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.8 | ColumnmcmCBiasCurrent | not-accessible | mandatory | Bias current for the optical laser. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.9 | ColumnmcmCModulation | not-accessible | mandatory | The frequency modulation for the optical laser. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.10 | ColumnmcmCApc | not-accessible | mandatory | The APC value. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.11 | ColumnmcmCIwmModulation | not-accessible | mandatory | The frequency modulation for the IWM channel. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.12 | ColumnmcmCLaserOnOff | not-accessible | mandatory | The laser On/Off flag. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.13 | ColumnmcmCTemperature | not-accessible | mandatory | The current temperature, or the operating temperature of the optical device. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.14 | ColumnmcmCIntensity | not-accessible | mandatory | The intensity of the optical light. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.15 | ColumnmcmCSignalStrength | not-accessible | mandatory | The current signal strength for the optical path. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.16 | ColumnmcmCLossOfLight | not-accessible | mandatory | If set to true, no laser light is present. If set to false, no loss of light has occurred. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.17 | ColumnmcmCSignalDetect | not-accessible | mandatory | If set to true, signal is detected. If set to false, no signal is present. |
| 1.3.6.1.4.1.4253.2.3.9.3.1.18 | ColumnmcmCRefClock | not-accessible | mandatory | The value of the reference clock in decimal notation. For a given value, like 1660, the actual value is 16.60-EN. In otherwords, assume a two digit decimal poi… |
| 1.3.6.1.4.1.4253.2.3.9.3.1.19 | ColumnmcmCClockDiv | not-accessible | mandatory | The clock divisor. Values are 1250, 622 or 155 in the appropriate clock frequency scale. |
| 1.3.6.1.4.1.4253.2.3.9.4 | TablemcmPortCCntrTable | not-accessible | mandatory | This table represents the information for each MCM port's current counters. |
| 1.3.6.1.4.1.4253.2.3.9.4.1 | RowmcmPortCCntrEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.9.4.1.1 | ColumnmcmPortCCntrCardLocation | not-accessible | mandatory | Location of the MCM port. Valid values are: Local in the same chassis, or remote to this chassis |
| 1.3.6.1.4.1.4253.2.3.9.4.1.2 | ColumnmcmPortCCntrCardShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 2..3. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.3 | ColumnmcmPortCCntrCardSlot | not-accessible | mandatory | The slot within the shelf the Module is in. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.4 | ColumnmcmPortCCntrIndex | not-accessible | mandatory | Port's index. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.5 | ColumnmcmPortCCntrASs | not-accessible | mandatory | mcm port's ASs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.7 | ColumnmcmPortCCntrFEs | not-accessible | mandatory | MCM port's FEs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.8 | ColumnmcmPortCCntrCRCErrs | not-accessible | mandatory | MCM port's CRC errs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.9 | ColumnmcmPortCCntrSESs | not-accessible | mandatory | mcm port's SESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.10 | ColumnmcmPortCCntrSEFSs | not-accessible | mandatory | MCM port's SEFSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.11 | ColumnmcmPortCCntrUASs | not-accessible | mandatory | MCM port's UASs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.12 | ColumnmcmPortCCntrLESs | not-accessible | mandatory | MCM port's LESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.13 | ColumnmcmPortCCntrBESs | not-accessible | mandatory | MCM port's BESs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.14 | ColumnmcmPortCCntrDMs | not-accessible | mandatory | MCM port's DMSs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.9.4.1.15 | ColumnmcmPortCCntrLCVs | not-accessible | mandatory | MCM port's LCVs counter less than 15 mins. |
| 1.3.6.1.4.1.4253.2.3.10 | NodefnCond | |||
| 1.3.6.1.4.1.4253.2.3.10.1 | ScalarfnCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all Fans since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.10.2 | TablefnCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each fan module. |
| 1.3.6.1.4.1.4253.2.3.10.2.1 | RowfnCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.10.2.1.1 | ColumnfnCPerfID | not-accessible | mandatory | The module ID where the fan module is plugged in. |
| 1.3.6.1.4.1.4253.2.3.10.2.1.2 | ColumnfnCPerfState | not-accessible | mandatory | The state of the fan module. |
| 1.3.6.1.4.1.4253.2.3.10.2.1.3 | ColumnfnCPerfStatus | not-accessible | mandatory | The status of the fan module. This status represents the status of the fan module and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.12 | NoderpsmCond | |||
| 1.3.6.1.4.1.4253.2.3.12.1 | ScalarrpsmCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RPSMs' since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.12.2 | TablerpsmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each rpsm card |
| 1.3.6.1.4.1.4253.2.3.12.2.1 | RowrpsmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.12.2.1.1 | ColumnrpsmCPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.3.12.2.1.2 | ColumnrpsmCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.12.2.1.3 | ColumnrpsmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.12.2.1.4 | ColumnrpsmCPerfState | not-accessible | mandatory | The state of the rpsm card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.12.2.1.5 | ColumnrpsmCPerfStatus | not-accessible | mandatory | The status of the rpsm card. This status represents the status of the rpsm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.12.2.1.6 | ColumnrpsmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rpsm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.12.2.1.7 | ColumnrpsmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rpsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.12.3 | ScalarrpsmCCounterFlag | not-accessible | mandatory | Turns special condition software counters On or Off for this card. Default is off. |
| 1.3.6.1.4.1.4253.2.3.13 | NodersdmCond | |||
| 1.3.6.1.4.1.4253.2.3.13.1 | ScalarrsdmCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RSDMs' since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.13.2 | TablersdmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each oppm card |
| 1.3.6.1.4.1.4253.2.3.13.2.1 | RowrsdmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.13.2.1.1 | ColumnrsdmCPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.3.13.2.1.2 | ColumnrsdmCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.13.2.1.3 | ColumnrsdmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.13.2.1.4 | ColumnrsdmCPerfState | not-accessible | mandatory | The state of the rsdm card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.13.2.1.5 | ColumnrsdmCPerfStatus | not-accessible | mandatory | The status of the rsdm card. This status represents the status of the rsdm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.13.2.1.6 | ColumnrsdmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rsdm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.13.2.1.7 | ColumnrsdmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rsdm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.13.3 | ScalarrsdmCCounterFlag | not-accessible | mandatory | Turns special condition software counters On or Off for this card. Default is off. |
| 1.3.6.1.4.1.4253.2.3.14 | NodertdmCond | |||
| 1.3.6.1.4.1.4253.2.3.14.1 | ScalarrtdmCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RTDM's since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.14.2 | TablertdmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each mux/demux card |
| 1.3.6.1.4.1.4253.2.3.14.2.1 | RowrtdmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.14.2.1.1 | ColumnrtdmCPerfLocation | not-accessible | mandatory | The location of the card. Choices are local or remote. |
| 1.3.6.1.4.1.4253.2.3.14.2.1.2 | ColumnrtdmCPerfShelf | not-accessible | mandatory | The shelf the card is in. Valid values are: 1 to 10 |
| 1.3.6.1.4.1.4253.2.3.14.2.1.3 | ColumnrtdmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.14.2.1.4 | ColumnrtdmCPerfState | not-accessible | mandatory | The status of the mux card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.14.2.1.5 | ColumnrtdmCPerfStatus | not-accessible | mandatory | The status of the mux card. This status represents the status of the mux card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.14.2.1.6 | ColumnrtdmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this Mux has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.14.2.1.7 | ColumnrtdmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this mux has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.14.3 | ScalarrtdmCCounterFlag | not-accessible | mandatory | Turns special condition software counters On or Off for this card. Default is off. |
| 1.3.6.1.4.1.4253.2.3.15 | NodeosamCond | |||
| 1.3.6.1.4.1.4253.2.3.15.1 | ScalarosamCNumEvents | not-accessible | mandatory | Total number of events received for all osam's since this mode was started. |
| 1.3.6.1.4.1.4253.2.3.15.2 | TableosamCPerfTable | not-accessible | mandatory | This table represents the information for special conditions performance data collected for each osam module. |
| 1.3.6.1.4.1.4253.2.3.15.2.1 | RowosamCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.15.2.1.1 | ColumnosamCPerfLocation | not-accessible | mandatory | Location of the module. |
| 1.3.6.1.4.1.4253.2.3.15.2.1.2 | ColumnosamCPerfShelf | not-accessible | mandatory | The shelf number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.3.15.2.1.3 | ColumnosamCPerfSlot | not-accessible | mandatory | The slot number in which the module is plugged in. |
| 1.3.6.1.4.1.4253.2.3.15.2.1.4 | ColumnosamCPerfState | not-accessible | mandatory | The current state of the module. |
| 1.3.6.1.4.1.4253.2.3.15.2.1.5 | ColumnosamCPerfStatus | not-accessible | mandatory | The current alarm status of the channel. |
| 1.3.6.1.4.1.4253.2.3.15.2.1.6 | ColumnosamCPerfAvailTime | not-accessible | mandatory | The number of seconds since the start of this mode that this module has been up and running. |
| 1.3.6.1.4.1.4253.2.3.15.2.1.7 | ColumnosamCPerfErrFreeSecs | not-accessible | mandatory | The number of seconds since the start of this mode that this module has been experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.15.3 | ScalarosamCPerfCounterFlag | not-accessible | mandatory | Turns osam special condition software counters on and off. Default is off. |
| 1.3.6.1.4.1.4253.2.3.16 | NodersmCond | |||
| 1.3.6.1.4.1.4253.2.3.16.1 | ScalarrsmCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all RSMs' since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.16.2 | TablersmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each rsm card |
| 1.3.6.1.4.1.4253.2.3.16.2.1 | RowrsmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.16.2.1.1 | ColumnrsmCPerfLocation | not-accessible | mandatory | The location of the card. |
| 1.3.6.1.4.1.4253.2.3.16.2.1.2 | ColumnrsmCPerfShelf | not-accessible | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.16.2.1.3 | ColumnrsmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.16.2.1.4 | ColumnrsmCPerfState | not-accessible | mandatory | The state of the rsm card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.16.2.1.5 | ColumnrsmCPerfStatus | not-accessible | mandatory | The status of the rsm card. This status represents the status of the rsm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.16.2.1.6 | ColumnrsmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rsm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.16.2.1.7 | ColumnrsmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this rsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.16.3 | ScalarrsmCCounterFlag | not-accessible | mandatory | Turns special condition software counters On or Off for this card. Default is off. |
| 1.3.6.1.4.1.4253.2.3.17 | NodeupsmCond | |||
| 1.3.6.1.4.1.4253.2.3.17.1 | ScalarupsmCNumEvents | not-accessible | mandatory | Total number of all traps (events) generated by all UPSMs' since this mode is started. |
| 1.3.6.1.4.1.4253.2.3.17.2 | TableupsmCPerfTable | not-accessible | mandatory | This table represents the information for performance data collected for each upsm card |
| 1.3.6.1.4.1.4253.2.3.17.2.1 | RowupsmCPerfEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.2.3.17.2.1.1 | ColumnupsmCPerfLocation | not-accessible | mandatory | The location of the card. |
| 1.3.6.1.4.1.4253.2.3.17.2.1.2 | ColumnupsmCPerfShelf | not-accessible | mandatory | The shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.17.2.1.3 | ColumnupsmCPerfSlot | not-accessible | mandatory | The slot within the shelf the card is in. |
| 1.3.6.1.4.1.4253.2.3.17.2.1.4 | ColumnupsmCPerfState | not-accessible | mandatory | The state of the upsm card. The states are: online, offline, empty, loopback or diag. |
| 1.3.6.1.4.1.4253.2.3.17.2.1.5 | ColumnupsmCPerfStatus | not-accessible | mandatory | The status of the upsm card. This status represents the status of the upsm card and in general is different from the status of the system. |
| 1.3.6.1.4.1.4253.2.3.17.2.1.6 | ColumnupsmCAvailTime | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this upsm has been up and running. This will generally be the same as 15 minutes in seconds (900). |
| 1.3.6.1.4.1.4253.2.3.17.2.1.7 | ColumnupsmCErrFreeSecs | not-accessible | mandatory | The number of seconds in this time slot (15 minutes) that this upsm has not experienced any alarms. |
| 1.3.6.1.4.1.4253.2.3.17.3 | ScalarupsmCCounterFlag | not-accessible | mandatory | Turns special condition software counters On or Off for this card. Default is off. |
| 1.3.6.1.4.1.4253.3 | Nodefaults | |||
| 1.3.6.1.4.1.4253.3.1 | NodeeventLog | |||
| 1.3.6.1.4.1.4253.3.1.1 | ScalareveTrapThreshold | not-accessible | mandatory | Threshold before events of the same type are no longer sent. Default can be a number as small as 1. |
| 1.3.6.1.4.1.4253.3.1.2 | ScalareveNumEvents | read-only | mandatory | Number of events logged in the table below. This counter is automatically set by the software. |
| 1.3.6.1.4.1.4253.3.1.3 | TableeveLogTable | not-accessible | mandatory | This table represents the information for the event log buffer. There are a maximum of 700 entries in the event log. The events are kept in a circular buffer f… |
| 1.3.6.1.4.1.4253.3.1.3.1 | RoweveLogEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.1.3.1.1 | ColumneveDateTime | read-only | mandatory | The date and time of the event logged in the buffer |
| 1.3.6.1.4.1.4253.3.1.3.1.2 | ColumneveEventId | read-only | mandatory | The event ID assigned to this event. |
| 1.3.6.1.4.1.4253.3.1.3.1.3 | ColumneveSeverity | read-only | mandatory | The severity of this event. Could be critical, major, minor, or normal (informational). |
| 1.3.6.1.4.1.4253.3.1.3.1.4 | ColumneveSysStatus | read-only | mandatory | The current status of the system. Could be critical, major, minor, or normal (informational). |
| 1.3.6.1.4.1.4253.3.1.3.1.5 | ColumneveSource | read-only | mandatory | A five to seven tuple string composed of the following items: System Name:card type (MPM, OCMITU, OFCM, etc.). location (L for local, R[number] for remote with… |
| 1.3.6.1.4.1.4253.3.1.3.1.6 | ColumneveDescr | read-only | mandatory | A string signifying the cause of the error in natural language (preferrably English) format. |
| 1.3.6.1.4.1.4253.3.1.3.1.7 | ColumneveTrap | read-only | mandatory | If set to True, this event was sent as a trap. If set to False, this event was merely logged and not sent as a trap. |
| 1.3.6.1.4.1.4253.3.1.3.1.8 | ColumneveSeqNum | read-only | mandatory | The unique sequence number for this event entry in the event log. |
| 1.3.6.1.4.1.4253.3.1.4 | ScalareveDeleteLog | read-write | mandatory | If the value is reset, the event log table of the active cp is deleted - meaning all the log entries are flushed!! |
| 1.3.6.1.4.1.4253.3.1.5 | ScalareveLastEntryDateTime | read-only | mandatory | Date and time stamp of the last event log entry. This provides quick access into the last event log entry. |
| 1.3.6.1.4.1.4253.3.1.6 | ScalareveHundredthEntryDateTime | read-only | mandatory | Date and time stamp of the most recent 100th event log entry. This provides quick access into retrieving the most recent 100 event log entries. If less than 10… |
| 1.3.6.1.4.1.4253.3.1.7 | ScalareveTwoHundredthEntryDateTime | read-only | mandatory | Date and time stamp of the most recent 200th event log entry. This provides quick access into retrieving the most recent 200 event log entries. If less than 20… |
| 1.3.6.1.4.1.4253.3.1.8 | ScalareveThreeHundredthEntryDateTime | read-only | mandatory | Date and time stamp of the most recent 300th event log entry. This provides quick access into retrieving the most recent 300 event log entries. If less than 30… |
| 1.3.6.1.4.1.4253.3.1.9 | ScalareveFourHundredthEntryDateTime | read-only | mandatory | Date and time stamp of the most recent 400th event log entry. This provides quick access into retrieving the most recent 400 event log entries. If less than 40… |
| 1.3.6.1.4.1.4253.3.1.10 | ScalareveFiveHundredthEntryDateTime | read-only | mandatory | Date and time stamp of the most recent 500th event log entry. This provides quick access into retrieving the most recent 500 event log entries. If less than 50… |
| 1.3.6.1.4.1.4253.3.1.11 | ScalareveSixHundredthEntryDateTime | read-only | mandatory | Date and time stamp of the most recent 600th event log entry. This provides quick access into retrieving the most recent 600 event log entries. If less than 60… |
| 1.3.6.1.4.1.4253.3.1.12 | ScalareveSevenHundredthEntryDateTime | read-only | mandatory | Date and time stamp of the most recent 700th event log entry. This provides quick access into retrieving the most recent 700 event log entries. If less than 70… |
| 1.3.6.1.4.1.4253.3.1.13 | ScalareveEightHundredthEntryDateTime | not-accessible | mandatory | Date and time stamp of the most recent 800th event log entry. This provides quick access into retrieving the most recent 800 event log entries. If less than 80… |
| 1.3.6.1.4.1.4253.3.1.14 | ScalareveNineHundredthEntryDateTime | not-accessible | mandatory | Date and time stamp of the most recent 900th event log entry. This provides quick access into retrieving the most recent 900 event log entries. If less than 90… |
| 1.3.6.1.4.1.4253.3.2 | NodeuserLog | |||
| 1.3.6.1.4.1.4253.3.2.1 | ScalarusrNumLogs | not-accessible | mandatory | Number of user events logged in the table below. This counter is automatically set by the software. |
| 1.3.6.1.4.1.4253.3.2.2 | TableusrLogTable | not-accessible | mandatory | This table represents the information for user event log buffer |
| 1.3.6.1.4.1.4253.3.2.2.1 | RowusrLogEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.2.2.1.1 | ColumnusrDateTime | not-accessible | mandatory | The date and time of the event logged in the buffer |
| 1.3.6.1.4.1.4253.3.2.2.1.2 | ColumnusrLogonId | not-accessible | mandatory | The Logon ID of the user causing this event to be logged. |
| 1.3.6.1.4.1.4253.3.2.2.1.3 | ColumnusrTarget | not-accessible | mandatory | A four tuple string composed of the following items: location (remote or local), type (cp, cc, mux or ps), shelf, and slot id. The tuples are separated by comm… |
| 1.3.6.1.4.1.4253.3.2.2.1.4 | ColumnusrLogDescr | not-accessible | mandatory | A string signifying the action logged in natural language (preferrably English) format. |
| 1.3.6.1.4.1.4253.3.2.2.1.5 | ColumnusrTrap | not-accessible | mandatory | If set to True, this user event was sent as a trap. If set to False, this event was merely logged and not sent as a trap. |
| 1.3.6.1.4.1.4253.3.3 | Nodediagnostics | |||
| 1.3.6.1.4.1.4253.3.3.1 | ScalardiagModeNum | read-only | mandatory | Number of cards in diagnostics mode in the table below. This counter is automatically set by the software. |
| 1.3.6.1.4.1.4253.3.3.2 | TablediagModeTable | not-accessible | mandatory | This table represents the information for each card in diagnostics mode. |
| 1.3.6.1.4.1.4253.3.3.2.1 | RowdiagModeEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.3.2.1.1 | ColumndiagLocation | read-only | mandatory | The location of the card: local or remote |
| 1.3.6.1.4.1.4253.3.3.2.1.2 | ColumndiagShelf | read-only | mandatory | The shelf in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.2.1.3 | ColumndiagSlot | read-only | mandatory | The card slot in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.2.1.4 | ColumndiagSetMode | read-only | mandatory | If on, the card will be in diagnostics mode. If off, the card comes out of diagnostics mode. |
| 1.3.6.1.4.1.4253.3.3.3 | ScalardiagTestNum | read-only | mandatory | Number of built-in diagnostics tests in the table below. |
| 1.3.6.1.4.1.4253.3.3.4 | TablediagTestTable | not-accessible | mandatory | This table represents the information for each built-in diagnostics test. |
| 1.3.6.1.4.1.4253.3.3.4.1 | RowdiagTestEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.3.4.1.1 | ColumndiagTestId | read-write | mandatory | The name of the built-in diagnostics test. |
| 1.3.6.1.4.1.4253.3.3.4.1.2 | ColumndiagTLocation | read-write | mandatory | The location of the card to run the test on |
| 1.3.6.1.4.1.4253.3.3.4.1.3 | ColumndiagTShelf | read-write | mandatory | The shelf in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.4.1.4 | ColumndiagTSlot | read-write | mandatory | The card slot in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.4.1.5 | ColumndiagParam1 | read-write | mandatory | The first parameter, if any to pass to the built-in test module. This parameter may be NULL to signify no run-time parameters. If there is a parameter in, any … |
| 1.3.6.1.4.1.4253.3.3.4.1.6 | ColumndiagParam2 | read-write | mandatory | The second parameter, if any to pass to the built-in test module. This parameter may be NULL to signify no more run-time parameters. If there is a parameter in… |
| 1.3.6.1.4.1.4253.3.3.4.1.7 | ColumndiagParam3 | read-write | mandatory | The third parameter, if any to pass to the built-in test module. This parameter may be NULL to signify no more run-time parameters. If there is a parameter in … |
| 1.3.6.1.4.1.4253.3.3.4.1.8 | ColumndiagTSetMode | read-write | mandatory | If on, the given test will be run on the given card. The value off has no effect in this case and is ignored. |
| 1.3.6.1.4.1.4253.3.3.5 | NodediagSelfTest | |||
| 1.3.6.1.4.1.4253.3.3.5.1 | NodemcmescSelfTest | |||
| 1.3.6.1.4.1.4253.3.3.5.1.1 | TablemcmescSelfTestTable | not-accessible | mandatory | This table represents the self-test results for mcmesc link port. |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1 | RowmcmescSelfTestEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1.1 | ColumnmcmescSelfTestLocation | read-only | mandatory | The location of the card: local or remote. The self test is applicable to local mcmesc only. |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1.2 | ColumnmcmescSelfTestShelf | read-only | mandatory | The shelf in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1.3 | ColumnmcmescSelfTestSlot | read-only | mandatory | The card slot in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1.4 | ColumnmcmescSelfTestStart | read-write | mandatory | Initiate a self-test. A get on this will always return an other. Any outstanding loopbacks will be turned off before starting self-test. |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1.5 | ColumnmcmescSelfTestResult | read-only | mandatory | Indicate an overall result of the latest self-test. The value inprogress(3) will be given if a self-test is in progress. The table mcmescLinkSelfTestResult and… |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1.6 | ColumnmcmescSelfTestSeqNum | read-only | mandatory | Indicate a sequece number associated with the latest complete self test. The sring of inprogress will be given if a self-test is in progress. The table mcmescL… |
| 1.3.6.1.4.1.4253.3.3.5.1.1.1.7 | ColumnmcmescSelfTestTimeStamp | read-only | mandatory | Indicate the time stamp associated with the latest complete self test. The value inprogress(3) will be given if a self-test is in progress. The table mcmescLin… |
| 1.3.6.1.4.1.4253.3.3.5.1.2 | TablemcmescLinkSelfTestResultTable | not-accessible | mandatory | This table represents the self-test results for mcmesc link port. |
| 1.3.6.1.4.1.4253.3.3.5.1.2.1 | RowmcmescLinkSelfTestResultEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.3.5.1.2.1.1 | ColumnmcmescLinkSelfTestLocation | read-only | mandatory | The location of the card: local or remote. The self test is applicable to local mcmesc only. |
| 1.3.6.1.4.1.4253.3.3.5.1.2.1.2 | ColumnmcmescLinkSelfTestShelf | read-only | mandatory | The shelf in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.5.1.2.1.3 | ColumnmcmescLinkSelfTestSlot | read-only | mandatory | The card slot in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.5.1.2.1.4 | ColumnmcmescLinkSelfTestTxI2c | read-only | mandatory | Indicate the link port's Tx I2C self-test result. The value inprogress(3) will be given if a self-test is in progress. |
| 1.3.6.1.4.1.4253.3.3.5.1.2.1.5 | ColumnmcmescLinkSelfTestCdrI2c | read-only | mandatory | Indicate the link port's CDR I2C self-test result. The value inprogress(3) will be given if a self-test is in progress. |
| 1.3.6.1.4.1.4253.3.3.5.1.2.1.6 | ColumnmcmescLinkSelfTestDataPath | read-only | mandatory | Indicate the link port's data path self-test result. The value inprogress(3) will be given if a self-test is in progress. |
| 1.3.6.1.4.1.4253.3.3.5.1.3 | TablemcmescPortSelfTestResultTable | not-accessible | mandatory | This table represents the self-test results for mcmesc CPE port. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1 | RowmcmescPortSelfTestResultEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.1 | ColumnmcmescPortSelfTestLocation | read-only | mandatory | The location of the card: local or remote. The self test is applicable to local mcmesc only. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.2 | ColumnmcmescPortSelfTestShelf | read-only | mandatory | The shelf in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.3 | ColumnmcmescPortSelfTestSlot | read-only | mandatory | The card slot in which the card is located. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.4 | ColumnmcmescPortSelfTestPort | read-only | mandatory | The CPE port's index. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.5 | ColumnmcmescPortSelfTestTxI2c | read-only | mandatory | Indicate the CPE port's Tx I2C self-test result. The value inprogress(3) will be given if a self-test is in progress. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.6 | ColumnmcmescPortSelfTestCdrI2c | read-only | mandatory | Indicate the CPE port's CDR I2C self-test result. The value inprogress(3) will be given if a self-test is in progress. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.7 | ColumnmcmescPortSelfTestTxDataPath | read-only | mandatory | Indicate the CPE port's Tx data path self-test result. The value inprogress(3) will be given if a self-test is in progress. |
| 1.3.6.1.4.1.4253.3.3.5.1.3.1.8 | ColumnmcmescPortSelfTestRxDataPath | read-only | mandatory | Indicate the CPE port's Rx data path self-test result. The value inprogress(3) will be given if a self-test is in progress. |
| 1.3.6.1.4.1.4253.3.4 | NodealarmLog | |||
| 1.3.6.1.4.1.4253.3.4.1 | ScalaralarmNumEvents | read-only | mandatory | Number of alarms logged in the table below. This counter is automatically set by the software. The max is 300 entries. |
| 1.3.6.1.4.1.4253.3.4.2 | TablealarmLogTable | not-accessible | mandatory | This table represents the information for the alarm log buffer |
| 1.3.6.1.4.1.4253.3.4.2.1 | RowalarmLogEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.3.4.2.1.1 | ColumnalarmFirstDateTime | read-only | mandatory | The date and time for the first alarm occurrence. |
| 1.3.6.1.4.1.4253.3.4.2.1.2 | ColumnalarmTag | read-only | mandatory | A unique tag used to identify the alarm entry. |
| 1.3.6.1.4.1.4253.3.4.2.1.3 | ColumnalarmLastDateTime | read-only | mandatory | The date and time for the most recent alarm occurrence. If this is the first time occurrence, it would be same as alarmFirstDateTime. |
| 1.3.6.1.4.1.4253.3.4.2.1.4 | ColumnalarmEventId | read-only | mandatory | The event ID assigned to this alarm. |
| 1.3.6.1.4.1.4253.3.4.2.1.5 | ColumnalarmSeverity | read-only | mandatory | The severity of this alarm. Could be critical, major, or minor. |
| 1.3.6.1.4.1.4253.3.4.2.1.6 | ColumnalarmSource | read-only | mandatory | A five to seven tuple string composed of the following items: System Name:card type (MPM, OCMITU, OFCM, etc.). location (L for local, R[number] for remote with… |
| 1.3.6.1.4.1.4253.3.4.2.1.7 | ColumnalarmDescr | read-only | mandatory | A string signifying the cause of the error in natural language (preferrably English) format. |
| 1.3.6.1.4.1.4253.3.4.2.1.8 | ColumnalarmCnt | read-only | mandatory | Number of times alarm has occurred(from the same source). |
| 1.3.6.1.4.1.4253.3.4.2.1.9 | ColumnalarmAck | read-write | mandatory | Acknowledge or unacknowledge the active alarm. Ack will remove its contribution to the external dry contact alarm closure. Default is unacknowledged. |
| 1.3.6.1.4.1.4253.3.4.2.1.10 | ColumnalarmClear | read-write | mandatory | An action to clear the alarm from the alarm log. If alarm persists, another alarm will be sent. A GET operation would always return other(1). |
| 1.3.6.1.4.1.4253.3.4.3 | ScalaralarmLastChange | read-only | mandatory | Time ticks in microseconds of when the last change was made to the alarm log. This includes ack/unack, clear, and alarm addition/deletion. |
| 1.3.6.1.4.1.4253.5 | Nodeaccounting | |||
| 1.3.6.1.4.1.4253.5.1 | NodecpAcct | |||
| 1.3.6.1.4.1.4253.5.1.1 | TableacctCPTable | not-accessible | mandatory | This table represents the information for each system accounting data maintained for each CP. |
| 1.3.6.1.4.1.4253.5.1.1.1 | RowacctCPEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.5.1.1.1.1 | ColumnacctCPShelf | read-only | mandatory | The shelf in which the given CP card is placed. |
| 1.3.6.1.4.1.4253.5.1.1.1.2 | ColumnacctCPSlot | read-only | mandatory | The slot in which the given CP card is placed. |
| 1.3.6.1.4.1.4253.5.1.1.1.3 | ColumnacctCPDsgnAct | not-accessible | mandatory | The total time this CP has been designated Active |
| 1.3.6.1.4.1.4253.5.1.1.1.4 | ColumnacctCPDsgnStdby | not-accessible | mandatory | The total time this CP has been designated Standby |
| 1.3.6.1.4.1.4253.5.1.1.1.5 | ColumnacctCPActive | read-only | mandatory | The total time this CP has actually been the primary |
| 1.3.6.1.4.1.4253.5.1.1.1.6 | ColumnacctCPStandby | read-only | mandatory | The total time this CP has actually been the standby |
| 1.3.6.1.4.1.4253.5.1.1.1.7 | ColumnacctCPUpTime | read-only | mandatory | The total time since this CP has been commissioned |
| 1.3.6.1.4.1.4253.5.1.1.1.8 | ColumnacctCPUnAvail | read-only | mandatory | The total time this CP has not been available due to an alarm, diag testing or being put offline |
| 1.3.6.1.4.1.4253.5.1.1.1.9 | ColumnacctCPResetCntrs | read-write | mandatory | If reset, the CP accounting counters will be reset to 0. A get on this will always return other. |
| 1.3.6.1.4.1.4253.5.2 | NodeccAcct | |||
| 1.3.6.1.4.1.4253.5.2.1 | TableacctCCTable | not-accessible | mandatory | This table represents the information for each system accounting data maintained for each CC. |
| 1.3.6.1.4.1.4253.5.2.1.1 | RowacctCCEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.5.2.1.1.1 | ColumnacctCCLocation | read-only | mandatory | The location of the CC card: local or remote. |
| 1.3.6.1.4.1.4253.5.2.1.1.2 | ColumnacctCCShelf | read-only | mandatory | The shelf in which the given CC card is placed. |
| 1.3.6.1.4.1.4253.5.2.1.1.3 | ColumnacctCCSlot | read-only | mandatory | The slot in which the given CC card is placed. |
| 1.3.6.1.4.1.4253.5.2.1.1.4 | ColumnacctCCUpTime | read-only | mandatory | The total time since this CC has been commissioned |
| 1.3.6.1.4.1.4253.5.2.1.1.5 | ColumnacctCCUnAvail | read-only | mandatory | The total time this CC has not been available due to an alarm, diag testing or being put offline |
| 1.3.6.1.4.1.4253.5.2.1.1.6 | ColumnacctCCResetCntrs | read-write | mandatory | If reset, the CC accounting counters will be reset to 0. A get on this will always return other. |
| 1.3.6.1.4.1.4253.5.3 | NodemcmAcct | |||
| 1.3.6.1.4.1.4253.5.3.1 | TableacctmcmTable | not-accessible | mandatory | This table represents the information for each system accounting data maintained for each MCMT1/MCME1. |
| 1.3.6.1.4.1.4253.5.3.1.1 | RowacctmcmEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.5.3.1.1.1 | ColumnacctmcmLocation | read-only | mandatory | The location of the MCMT1/MCME1 card: local or remote. |
| 1.3.6.1.4.1.4253.5.3.1.1.2 | ColumnacctmcmShelf | read-only | mandatory | The shelf in which the given MCMT1/MCME1 card is placed. |
| 1.3.6.1.4.1.4253.5.3.1.1.3 | ColumnacctmcmSlot | read-only | mandatory | The slot in which the given MCMT1/MCME1 card is placed. |
| 1.3.6.1.4.1.4253.5.3.1.1.4 | ColumnacctmcmUpTime | read-only | mandatory | The total time since this MCMT1/MCME1 has been commissioned |
| 1.3.6.1.4.1.4253.5.3.1.1.5 | ColumnacctmcmUnAvail | read-only | mandatory | The total time this MCMT1/MCME1 has not been available due to an alarm, diag testing or being put offline |
| 1.3.6.1.4.1.4253.5.3.1.1.6 | ColumnacctmcmResetCntrs | read-write | mandatory | If reset, the MCMT1/MCME1 accounting counters will be reset to 0. A get on this will always return other. |
| 1.3.6.1.4.1.4253.5.4 | NodemcmescAcct | |||
| 1.3.6.1.4.1.4253.5.4.1 | TableacctmcmescTable | not-accessible | mandatory | This table represents the information for each system accounting data maintained for each MCMESC. |
| 1.3.6.1.4.1.4253.5.4.1.1 | RowacctmcmescEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.4.1.4253.5.4.1.1.1 | ColumnacctmcmescLocation | read-only | mandatory | The location of the MCMESC card: local or remote. |
| 1.3.6.1.4.1.4253.5.4.1.1.2 | ColumnacctmcmescShelf | read-only | mandatory | The shelf in which the given MCMESC card is placed. |
| 1.3.6.1.4.1.4253.5.4.1.1.3 | ColumnacctmcmescSlot | read-only | mandatory | The slot in which the given MCMESC card is placed. |
| 1.3.6.1.4.1.4253.5.4.1.1.4 | ColumnacctmcmescUpTime | read-only | mandatory | The total time since this MCMESC has been commissioned. |
| 1.3.6.1.4.1.4253.5.4.1.1.5 | ColumnacctmcmescUnAvail | read-only | mandatory | The total time this MCMESC has not been available due to an alarm, diag testing or being put offline. |
| 1.3.6.1.4.1.4253.5.4.1.1.6 | ColumnacctmcmescResetCntrs | read-only | mandatory | If reset, the MCMESC accounting counters will be reset to 0. A get on this will always return other. |
| 1.3.6.1.4.1.4253.1001 | NodeluxNVoadmDetectorFailureTrap | This trap is sent when a failure is detected on the VOADM power monitor. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and option… | ||
| 1.3.6.1.4.1.4253.1002 | NodeluxNVoadmDetectorFailureResolvedTrap | This trap is sent when a failure on the VOADM power monitor has been resolved. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.1003 | NodeluxNVoadmOutofRangeTrap | This trap is sent when the user configured settings for a VOADM would force the power levels to be outside of allowed operating ranges for the current link con… | ||
| 1.3.6.1.4.1.4253.1004 | NodeluxNVoadmOutofRangeResolvedTrap | This trap is sent when an existing VOADM out of range condition is resolved. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and op… | ||
| 1.3.6.1.4.1.4253.1005 | NodeluxNsignalStrengthHighTrap | This trap is sent when the receieve signal strength is high. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the por… | ||
| 1.3.6.1.4.1.4253.1006 | NodeluxNsignalStrengthLowTrap | This trap is sent when the receieve signal strength is low. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port… | ||
| 1.3.6.1.4.1.4253.1007 | NodeluxNsignalStrengthNormalTrap | This trap is sent when the receieve signal strength is normal. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the p… | ||
| 1.3.6.1.4.1.4253.1008 | NodeluxNlaserPowerOutOfRangeTrap | This trap is sent upon detection of out of range laser power. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the po… | ||
| 1.3.6.1.4.1.4253.1009 | NodeluxNlaserPowerNormalTrap | This trap is sent upon detection of normal laser power. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port num… | ||
| 1.3.6.1.4.1.4253.1010 | NodeluxNberHighThresholdExceeded | This trap is sent upon detecting that MCMESC's BER high threshold is exceeds. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and o… | ||
| 1.3.6.1.4.1.4253.1011 | NodeluxNberHighThresholdExceededNormal | This trap is sent upon detecting that MCMESC's BER high threshold is not exceeded. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, … | ||
| 1.3.6.1.4.1.4253.1012 | NodeluxNberModerateThresholdExceeded | This trap is sent upon detecting that MCMESC's BER moderate threshold is exceeded. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, … | ||
| 1.3.6.1.4.1.4253.1013 | NodeluxNberModerateThresholdExceededNormal | This trap is sent upon detecting that MCMESC's BER moderate threshold is not exceeded. The source is a 4 or 5 tuple specifying the type, location, shelf, slot … | ||
| 1.3.6.1.4.1.4253.2000 | NodeluxNSNMPKeepalive | This trap is sent out periodicly by the MPM when SNMP keep alive functionality is enabled. | ||
| 1.3.6.1.4.1.4253.2001 | NodeluxNSNMPKeepalivesEnabled | This trap is sent upon SNMP keep alive functionality being enabled | ||
| 1.3.6.1.4.1.4253.2002 | NodeluxNSNMPKeepalivesDisabled | This trap is sent upon SNMP keep alive functionality being disabled | ||
| 1.3.6.1.4.1.4253.2003 | NodeluxNSNMPKeepaliveIntervalChanged | This trap is sent when the SNMP keep alive interval is modified | ||
| 1.3.6.1.4.1.4253.2004 | NodeluxNTelnetClientEnabled | Telnet client has been enabled for active telnet sessions | ||
| 1.3.6.1.4.1.4253.2005 | NodeluxNTelnetClientDisabled | Telnet client has been disabled for active telnet sessions | ||
| 1.3.6.1.4.1.4253.2017 | NodeluxNsnmpAuthenticationFailureTrap | This trap is sent upon receipt of invalid community strings. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the por… | ||
| 1.3.6.1.4.1.4253.2018 | NodeluxNcoldStartTrap | This trap is sent when the device has reinitialized itself. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port… | ||
| 1.3.6.1.4.1.4253.2019 | NodeluxNwarmStartTrap | This trap is sent when the device has undergone a warm boot. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the por… | ||
| 1.3.6.1.4.1.4253.2021 | NodeluxNlossOfLightResolvedTrap | This trap is sent when a loss of light condition has been resolved. For OCM/MCMT1/MCME1, it indicates that the link between two optically connected channel car… | ||
| 1.3.6.1.4.1.4253.2022 | NodeluxNlossOfLightDetectedTrap | This trap is sent when a loss of light condition has been detected. For OCM/MCMT1/MCME1, it indicates that the link between two optically connected channel car… | ||
| 1.3.6.1.4.1.4253.2023 | NodeluxNntpEnableTrap | This trap is sent when NTP is enabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of the source… | ||
| 1.3.6.1.4.1.4253.2024 | NodeluxNntpDisableTrap | This trap is sent when NTP is disabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of the sourc… | ||
| 1.3.6.1.4.1.4253.2025 | NodeluxNntpTimeServerChangedTrap | This trap is sent when the NTP time server is changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port numb… | ||
| 1.3.6.1.4.1.4253.2026 | NodeluxNntpUpdateIntervalChangedTrap | This trap is sent when the NTP update interval is changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port … | ||
| 1.3.6.1.4.1.4253.2027 | NodeluxNtimeZoneChangedTrap | This trap is sent when the system time zone is changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port num… | ||
| 1.3.6.1.4.1.4253.2030 | NodeluxNspiConnectionUpTrap | Obsolete. This trap is sent when SPI communications has been established with a card specified in the source field. The source is a 4 or 5 tuple specifying the… | ||
| 1.3.6.1.4.1.4253.2031 | NodeluxNcardLostTrap | This trap is sent when SPI communications has been lost with a card specified in the source field. The reason is either that the card has been physically remov… | ||
| 1.3.6.1.4.1.4253.2034 | NodeluxNConfigChangeTrap | This trap is sent when a configuration change has ocurred for a card specified in the source field. The source is a 4 or 5 tuple specifying the type, location,… | ||
| 1.3.6.1.4.1.4253.2035 | NodeluxNstatsPollFailedTrap | This trap is sent when statistics data can no longer be gathered from a card in the specified source field. The source is a 4 or 5 tuple specifying the type, l… | ||
| 1.3.6.1.4.1.4253.2040 | NodeluxNCardFoundTrap | This trap is sent when a card has been discovered in the chassis. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally th… | ||
| 1.3.6.1.4.1.4253.2041 | NodeluxNlocalLoopbackEnabledTrap | This trap is sent when the local loopback mode has been enabled for a channel card in the specified source field. The source is a 4 or 5 tuple specifying the t… | ||
| 1.3.6.1.4.1.4253.2042 | NodeluxNremoteLoopbackEnabledTrap | This trap is sent when the remote loopback mode has been enabled for a channel card in the specified source field. The source is a 4 or 5 tuple specifying the … | ||
| 1.3.6.1.4.1.4253.2043 | NodeluxNlocalLoopbackDisabledTrap | This trap is sent when the local loopback mode has been disabled for a channel card in the specified source field. The source is a 4 or 5 tuple specifying the … | ||
| 1.3.6.1.4.1.4253.2044 | NodeluxNremoteLoopbackDisabledTrap | This trap is sent when the remote loopback mode has been disabled for a channel card in the specified source field. The source is a 4 or 5 tuple specifying the… | ||
| 1.3.6.1.4.1.4253.2047 | NodeluxNftpSessionInitiatedTrap | This trap is sent when a ftp session has been initiated from the CLI. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.2050 | NodeluxNuserResetStatusTrap | Obsolete. This trap is sent when the status information for a card specified in the source field has been modified via the snmp agent. The source is a 4 or 5 t… | ||
| 1.3.6.1.4.1.4253.2051 | NodeluxNprotectionSwitchTrap | This trap is sent when a protection switch has occurred either automatically or manually. The source is a 4 or 5 tuple specifying the type, location, shelf, sl… | ||
| 1.3.6.1.4.1.4253.2052 | NodeluxNipAddressErrorTrap | Obsolete. This trap is sent when an error has occurred while configuring the IP address. The source is a 4 or 5 tuple specifying the type, location, shelf, slo… | ||
| 1.3.6.1.4.1.4253.2053 | NodeluxNipNetmaskErrorTrap | Obsolete. This trap is sent when an error has occurred while configuring the Netmask. The source is a 4 or 5 tuple specifying the type, location, shelf, slot I… | ||
| 1.3.6.1.4.1.4253.2054 | NodeluxNdefaultGatewayErrorTrap | Obsolete. This trap is sent when an error has occurred while configuring the default gateway. The source is a 4 or 5 tuple specifying the type, location, shelf… | ||
| 1.3.6.1.4.1.4253.2055 | NodeluxNlossOfSignalTrap | This trap is sent when a loss of signal is detected on one of the ports on a channel card specified in the source field. The source is a 4 or 5 tuple specifyin… | ||
| 1.3.6.1.4.1.4253.2056 | NodeluxNlossOfSignalNormalTrap | This trap is sent when a loss of signal problem on one of the ports on a channel card specified in the source field has been corrected. The source is a 4 or 5 … | ||
| 1.3.6.1.4.1.4253.2057 | NodeluxNlossOfFrameTrap | This trap is sent when a loss of frame error condition is detected on one of the ports on a channel card specified in the source field. The source is a 4 or 5 … | ||
| 1.3.6.1.4.1.4253.2058 | NodeluxNlossOfFrameNormalTrap | This trap is sent when a loss of frame error condition on one of the ports on a channel card specified in the source field has been corrected. The source is a … | ||
| 1.3.6.1.4.1.4253.2059 | NodeluxNrecvAISTrap | This trap is sent when a receive AIS (Alarm Indication Signal) is detected on one of the ports on a channel card specified in the source field. The source is a… | ||
| 1.3.6.1.4.1.4253.2060 | NodeluxNrecvAISNormalTrap | This trap is sent when a receive AIS (Alarm Indication Signal) problem on one of the ports on a channel card specified in the source field has been corrected. … | ||
| 1.3.6.1.4.1.4253.2061 | NodeluxNrecvYellowAlarmTrap | This trap is sent when a receive receive yellow alarm is detected on one of the ports on a channel card specified in the source field. The source is a 4 or 5 t… | ||
| 1.3.6.1.4.1.4253.2062 | NodeluxNrecvYellowAlarmNormalTrap | This trap is sent when a receive receive yellow alarm problem on one of the ports on a channel card specified in the source field has been corrected. The sourc… | ||
| 1.3.6.1.4.1.4253.2063 | NodeluxNlineCodeViolationTrap | This trap is sent when a line code violation error condition is detected on one of the ports on a channel card specified in the source field. The source is a 4… | ||
| 1.3.6.1.4.1.4253.2064 | NodeluxNlineCodeViolationNormalTrap | This trap is sent when a line code violation error condition on one of the ports on a channel card specified in the source field has been corrected. The source… | ||
| 1.3.6.1.4.1.4253.2065 | NodeluxNframingAlarmTrap | This trap is sent when a framing alarm is detected on one of the ports on a channel card specified in the source field. The source is a 4 or 5 tuple specifying… | ||
| 1.3.6.1.4.1.4253.2066 | NodeluxNframingAlarmNormalTrap | This trap is sent when a framing alarm problem on one of the ports on a channel card specified in the source field has been corrected. The source is a 4 or 5 t… | ||
| 1.3.6.1.4.1.4253.2067 | NodeluxNlossOfTimingTrap | This trap is sent when a loss of timing condition is detected on a channel card specified in the source field. The source is a 4 or 5 tuple specifying the type… | ||
| 1.3.6.1.4.1.4253.2068 | NodeluxNlossOfTimingNormalTrap | This trap is sent when a loss of timing problem on a channel card specified in the source field has been corrected. The source is a 4 or 5 tuple specifying the… | ||
| 1.3.6.1.4.1.4253.2073 | NodeluxNselfTestFailTrap | This trap is sent when a self-test failure is detected on a channel card specified in the source field. The source is a 4 or 5 tuple specifying the type, locat… | ||
| 1.3.6.1.4.1.4253.2074 | NodeluxNselfTestPassTrap | This trap is sent when a successful self-test is detected on a channel card specified in the source field. The source is a 4 or 5 tuple specifying the type, lo… | ||
| 1.3.6.1.4.1.4253.2075 | NodeluxNIbmDownTrap | This trap is sent when a problem is detected on a inband management link. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optio… | ||
| 1.3.6.1.4.1.4253.2076 | NodeluxNIbmNormalTrap | This trap is sent when a problem is resolved on a inband management link. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optio… | ||
| 1.3.6.1.4.1.4253.2077 | NodeluxNnearendCardLoopbackEnabledTrap | This trap is sent to indicate that a near-end card loopback has been enabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the type… | ||
| 1.3.6.1.4.1.4253.2078 | NodeluxNnearendCardLoopbackDisabledTrap | This trap is sent to indicate that a near-end card loopback has been disabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the typ… | ||
| 1.3.6.1.4.1.4253.2079 | NodeluxNnetworkPortLoopbackEnabledTrap | This trap is sent to indicate that a network port loopback has been enabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the type,… | ||
| 1.3.6.1.4.1.4253.2080 | NodeluxNnetworkPortLoopbackDisabledTrap | This trap is sent to indicate that a network port loopback has been disabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the type… | ||
| 1.3.6.1.4.1.4253.2081 | NodeluxNnetworkCardLoopbackEnabledTrap | This trap is sent to indicate that a network card loopback has been enabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the type,… | ||
| 1.3.6.1.4.1.4253.2082 | NodeluxNnetworkCardLoopbackDisabledTrap | This trap is sent to indicate that a network card loopback has been disabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the type… | ||
| 1.3.6.1.4.1.4253.2083 | NodeluxNnearendPortLoopbackEnabledTrap | This trap is sent to indicate that a nearend port loopback has been enabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the type,… | ||
| 1.3.6.1.4.1.4253.2084 | NodeluxNnearendPortLoopbackDisabledTrap | This trap is sent to indicate that a nearend port loopback has been disabled on an mcmt1/mcme1 or mcmesc card. The source is a 4 or 5 tuple specifying the type… | ||
| 1.3.6.1.4.1.4253.2085 | NodeluxNpowerSupplyNotPresentTrap | This trap is sent to indicate that the power supply specified in the source field is not present. The source is a 4 or 5 tuple specifying the type, location, s… | ||
| 1.3.6.1.4.1.4253.2086 | NodeluxNpowerSupplyOKTrap | This trap is sent to indicate that the power supply specified in the source field is performing properly. The source is a 4 or 5 tuple specifying the type, loc… | ||
| 1.3.6.1.4.1.4253.2087 | NodeluxNpowerSupplyDegradedTrap | This trap is sent to indicate that the performance of the power supply specified in the source field has degraded. The source is a 4 or 5 tuple specifying the … | ||
| 1.3.6.1.4.1.4253.2088 | NodeluxNpowerSupplyFailureTrap | This trap is sent to indicate that the power supply specified in the source field has failed. The source is a 4 or 5 tuple specifying the type, location, shelf… | ||
| 1.3.6.1.4.1.4253.2089 | NodeluxNfanOKTrap | This trap is sent to indicate that the fan specified in the source field is performing properly. The source is a 4 or 5 tuple specifying the type, location, sh… | ||
| 1.3.6.1.4.1.4253.2090 | NodeluxNfanFailureTrap | This trap is sent to indicate that the fan specified in the source field has failed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID… | ||
| 1.3.6.1.4.1.4253.2091 | NodeluxNcsimDataUnavailableTrap | This trap is sent to indicate that the ColorSIM module as specified in the source field is in a Data Unavailable state. The source is a 4 or 5 tuple specifying… | ||
| 1.3.6.1.4.1.4253.2092 | NodeluxNcsimDataAvailableTrap | This trap is sent to indicate that the ColorSIM module as specified in the source field is in a Data Available state. The source is a 4 or 5 tuple specifying t… | ||
| 1.3.6.1.4.1.4253.2093 | NodeluxNcsimModuleFailureTrap | This trap is sent to indicate that the ColorSIM module as specified in the source field has failed to operate properly. The source is a 4 or 5 tuple specifying… | ||
| 1.3.6.1.4.1.4253.2094 | NodeluxNethernetLossOfCarrierTrap | This trap is sent to indicate that loss of carrier has been detected on the CPE's ethernet port. The source is a 4 or 5 tuple specifying the type, location, sh… | ||
| 1.3.6.1.4.1.4253.2095 | NodeluxNethernetCarrierDetectedTrap | This trap is sent to indicate that the carrier has been detected on the CPE's ethernet port. The source is a 4 or 5 tuple specifying the type, location, shelf,… | ||
| 1.3.6.1.4.1.4253.2096 | NodeluxNtimingPriorityChangedTrap | This trap is sent to indicate that the timing priority for a card has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID,… | ||
| 1.3.6.1.4.1.4253.2097 | NodeluxNopenFiberCPEAlarmTrap | This trap is sent when an open fiber condition on the CPE has been detected from a card specified in the source field. The source is a 4 or 5 tuple specifying … | ||
| 1.3.6.1.4.1.4253.2098 | NodeluxNopenFiberCPEAlarmResolvedTrap | This trap is sent when an open fiber condition on the CPE has been resolved from a card specified in the source field. The source is a 4 or 5 tuple specifying … | ||
| 1.3.6.1.4.1.4253.2099 | NodeluxNstandbyMPMDetectedTrap | This trap is sent when the standby MPM card has been detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the p… | ||
| 1.3.6.1.4.1.4253.2100 | NodeluxNstandbyMPMLostTrap | This trap is sent when the standby MPM card has been lost. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port … | ||
| 1.3.6.1.4.1.4253.2101 | NodeluxNprotectionLinkFailureTrap | This trap is sent when the protection link has become unaviable due to either low receive power level or an open fiber condition. The source is a 4 or 5 tuple … | ||
| 1.3.6.1.4.1.4253.2102 | NodeluxNprotectionLinkFailureResolvedTrap | This trap is sent when the protection link has become available as a result of a corrective action to resolve a previous failure condition. The source is a 4 o… | ||
| 1.3.6.1.4.1.4253.2103 | NodeluxNtopologyDatabaseChangedTrap | This trap is sent whenever a link has either been added or deleted from the topology database. The source is a 4 or 5 tuple specifying the type, location, shel… | ||
| 1.3.6.1.4.1.4253.2104 | NodeluxNredundantDatabaseCopyComplete | This trap is sent upon completion of a forced redundant database copy. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optional… | ||
| 1.3.6.1.4.1.4253.2105 | NodeluxNredundantDatabaseCopyFailed | This trap is sent when a failure occurs during a forced redundant database copy. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, an… | ||
| 1.3.6.1.4.1.4253.2106 | NodeluxNimageExportInProgressTrap | This trap is sent when an module image is being exported from the MPM through ftp. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, … | ||
| 1.3.6.1.4.1.4253.2107 | NodeluxNimageExportSuccessTrap | This trap is sent when a module image exported from the MPM through ftp has been completed successfully. The source is a 4 or 5 tuple specifying the type, loca… | ||
| 1.3.6.1.4.1.4253.2108 | NodeluxNimageExportFailedTrap | This trap is sent when a module image exported from the MPM through ftp has failed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID,… | ||
| 1.3.6.1.4.1.4253.2109 | NodeluxNunknownCardTypeDetectedTrap | This trap is sent when a module with an unknown card type is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optional… | ||
| 1.3.6.1.4.1.4253.2110 | NodeluxNosamBiasCurrentOverLimitTrap | This trap is sent when the osam's bias current exceeds 90% of allowed maximum. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.2111 | NodeluxNosamBiasCurrentNormal | This trap is sent when the osam's bias current is within normal range. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optional… | ||
| 1.3.6.1.4.1.4253.2112 | NodeluxNosamTecCurrentOverLimit | This trap is sent when the osam's TEC current is above the specified limit. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and opt… | ||
| 1.3.6.1.4.1.4253.2113 | NodeluxNosamTecCurrentNormal | This trap is sent when the osam's TEC current is within normal range. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.2114 | NodeluxNosamLaserTemperatureDrift | This trap is sent when the osam's laser temperature drifts by more than +/- 2 degree Celsius. The source is a 4 or 5 tuple specifying the type, location, shelf… | ||
| 1.3.6.1.4.1.4253.2115 | NodeluxNosamLaserTemperatureStable | This trap is sent when the osam's laser temperature no longer drifts. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.2116 | NodeluxNosamMaxInputPowerReached | This trap is sent when the osam's input power is greater than or equal to 9 dBm. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, an… | ||
| 1.3.6.1.4.1.4253.2117 | NodeluxNosamInputPowerBackDownNormal | This trap is sent when the osam's input power has fallen within normal range. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and o… | ||
| 1.3.6.1.4.1.4253.2118 | NodeluxNosamMaxOutputPowerReached | This trap is sent when the osam's output power is greater than or equal to 13 dBm. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, … | ||
| 1.3.6.1.4.1.4253.2119 | NodeluxNosamOutputPowerNormal | This trap is sent when the osam's output power is within normal range. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optional… | ||
| 1.3.6.1.4.1.4253.2120 | NodeluxNosamOpticalGainDeltaExceeded | This trap is sent when the osam's gain delta is greater than or equal to 4 dB. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.2121 | NodeluxNosamOpticalGainDeltaNormal | This trap is sent when the osam's gain delta is less than 4 dB. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the … | ||
| 1.3.6.1.4.1.4253.2122 | NodeluxNosamMinInputPowerBelowLimit | This trap is sent when the osam's input power is less than or equal to -30 dBm. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and… | ||
| 1.3.6.1.4.1.4253.2123 | NodeluxNosamInputPowerBackUpNormal | This trap is sent when the osam's input power has risen within normal range. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and op… | ||
| 1.3.6.1.4.1.4253.2124 | NodeluxNosamSingleAprSensorFailed | This trap is sent when the osam's APR sensor is not functioning. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the… | ||
| 1.3.6.1.4.1.4253.2125 | NodeluxNosamSingleAprSensorNormal | This trap is sent when the osam's APR sensor has become functional. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally … | ||
| 1.3.6.1.4.1.4253.2126 | NodeluxNosamDualAprSensorFailed | This trap is sent when both of the osam's APR sensors are not functioning. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and opti… | ||
| 1.3.6.1.4.1.4253.2127 | NodeluxNosamDualAprSensorNormal | This trap is sent when both of the osam's APR sensors has become functional. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and op… | ||
| 1.3.6.1.4.1.4253.2128 | NodeluxNosamFiberDisconnected | This trap is sent when a fiber disconnect condition has been detected on an osam module. The source is a 4 or 5 tuple specifying the type, location, shelf, slo… | ||
| 1.3.6.1.4.1.4253.2129 | NodeluxNosamFiberConnected | This trap is sent when a fiber connect condition has been detected after a fiber disconnect on an osam module. The source is a 4 or 5 tuple specifying the type… | ||
| 1.3.6.1.4.1.4253.2130 | NodeluxNosamControlChanged | This trap is sent when either the current control or gain control has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID,… | ||
| 1.3.6.1.4.1.4253.2131 | NodeluxNosamLaserModuleOn | This trap is sent when the laser module has been turned on by the osam firmware. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, an… | ||
| 1.3.6.1.4.1.4253.2132 | NodeluxNosamLaserModuleOff | This trap is sent when the laser module has been turned off by the osam firmware. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, a… | ||
| 1.3.6.1.4.1.4253.2133 | NodeluxNipAuthenticationFailure | Not yet supported. This trap is sent when access from an invalid IP address based on the ACL has been detected. The source is a 4 or 5 tuple specifying the typ… | ||
| 1.3.6.1.4.1.4253.2134 | NodeluxNftpCompletedTrap | This trap is sent when the ftp session has been disconnected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the po… | ||
| 1.3.6.1.4.1.4253.2135 | NodeluxNftpHostFailedTrap | This trap is sent when the MPM is unable to connect to the ftp host. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.2136 | NodeluxNimageUpdateInProgressTrap | This trap is sent when an module image is being downloaded to MPM through ftp. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.2137 | NodeluxNimageUpdateSuccessTrap | This trap is sent when a module image download to MPM through ftp has been completed successfully. The source is a 4 or 5 tuple specifying the type, location, … | ||
| 1.3.6.1.4.1.4253.2138 | NodeluxNimageUpdateFailedTrap | This trap is sent when a module image download to MPM through ftp has failed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and o… | ||
| 1.3.6.1.4.1.4253.2139 | NodeluxNmoduleUpdateInProgressTrap | This trap is sent when a module image is being transferred from the MPM to the module. The source is a 4 or 5 tuple specifying the type, location, shelf, slot … | ||
| 1.3.6.1.4.1.4253.2140 | NodeluxNmoduleUpdateSuccessTrap | This trap is sent when a module image transfer from the MPM to the module has been completed successfully. The source is a 4 or 5 tuple specifying the type, lo… | ||
| 1.3.6.1.4.1.4253.2141 | NodeluxNmoduleUpdateFailedTrap | This trap is sent when a module image transfer from the MPM to the module has failed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot I… | ||
| 1.3.6.1.4.1.4253.2142 | NodeluxNethernetLinkFailure | This trap is sent upon detection of the ethernet link failure on the MPM. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optio… | ||
| 1.3.6.1.4.1.4253.2143 | NodeluxNethernetLinkFailureResolved | This trap is sent upon resolution of the ethernet link failure on the MPM. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and opti… | ||
| 1.3.6.1.4.1.4253.2144 | NodeluxNfanNotPresentTrap | This trap is sent to indicate that the fan specified in the source field is not present in the system. The source is a 4 or 5 tuple specifying the type, locati… | ||
| 1.3.6.1.4.1.4253.2145 | NodeluxNcardMismatchTrap | This trap is sent when a card mismatch is found in a given slot. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the… | ||
| 1.3.6.1.4.1.4253.2146 | NodeluxNpwrFeedLowVoltageTrap | This trap is sent when the DC voltage level on the power feed reaches very close to the shutdown voltage. The source is a 4 or 5 tuple specifying the type, loc… | ||
| 1.3.6.1.4.1.4253.2147 | NodeluxNpwrFeedLowVoltageRecoveryTrap | This trap is sent when the DC voltage level on the power feed recovers from the low voltage level condition . The source is a 4 or 5 tuple specifying the type,… | ||
| 1.3.6.1.4.1.4253.2148 | NodeluxNpwrFeedOKTrap | This trap is sent when the DC voltage level on the power feed is within the operating window of the chassis . The source is a 4 or 5 tuple specifying the type,… | ||
| 1.3.6.1.4.1.4253.2149 | NodeluxNpwrFeedFailureTrap | This trap is sent when the DC voltage level on the power feed is either too low or too high to operate the chassis The source is a 4 or 5 tuple specifying the … | ||
| 1.3.6.1.4.1.4253.2150 | NodeluxNpwrFeedBrkOpenTrap | This trap is sent when a user manually flips open the breaker relay switch attached to that feed. The source is a 4 or 5 tuple specifying the type, location, s… | ||
| 1.3.6.1.4.1.4253.2151 | NodeluxNextCritAlmInpTrap | This trap is sent when an alarm gets generated at an external alarm input that is configured for critical severity. The source is a 4 or 5 tuple specifying the… | ||
| 1.3.6.1.4.1.4253.2152 | NodeluxNextMajAlmInpTrap | This trap is sent when an alarm gets generated at an external alarm input that is configured for majority severity. The source is a 4 or 5 tuple specifying the… | ||
| 1.3.6.1.4.1.4253.2153 | NodeluxNextMinorAlmInpTrap | This trap is sent when an alarm gets generated at an external alarm input that is configured for minor severity. The source is a 4 or 5 tuple specifying the ty… | ||
| 1.3.6.1.4.1.4253.2154 | NodeluxNextClearAlmInpTrap | This trap is sent when an alarm gets cleared at an external alarm input. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and option… | ||
| 1.3.6.1.4.1.4253.2155 | NodeluxNpwrFeedOverVoltageTrap | This trap is sent when the DC voltage level on the power feed reaches very close to the shutdown voltage on the higher side. The source is a 4 or 5 tuple speci… | ||
| 1.3.6.1.4.1.4253.2156 | NodeluxNpwrFeedOverVoltageRecoveryTrap | This trap is sent when the DC voltage level on the power feed recovers from the over voltage level condition . The source is a 4 or 5 tuple specifying the type… | ||
| 1.3.6.1.4.1.4253.2157 | NodeluxNstandbySWMismatchTrap | This trap is sent when there is a mismatch between the software version of standby and active MPM. The source is a 4 or 5 tuple specifying the type, location, … | ||
| 1.3.6.1.4.1.4253.2158 | NodeluxNstandbyDBNotSupportedTrap | This trap is sent when the standby MPM do not support Active MPM's database. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and op… | ||
| 1.3.6.1.4.1.4253.2159 | NodeluxNactiveStandbySWAlignedTrap | This trap is sent when the software version between standby and active MPM is aligned. The source is a 4 or 5 tuple specifying the type, location, shelf, slot … | ||
| 1.3.6.1.4.1.4253.2160 | NodeluxNactiveStandbyDBAlignedTrap | This trap is sent when the database version between standby and active MPM is aligned. The source is a 4 or 5 tuple specifying the type, location, shelf, slot … | ||
| 1.3.6.1.4.1.4253.2161 | NodeluxNmcmescTestSequenceOnTrap | This trap is sent when the test-sequence is set to ON on an MCMESC card specified in the source field. The source is a 4 or 5 tuple specifying the type, locati… | ||
| 1.3.6.1.4.1.4253.2162 | NodeluxNmcmescTestSequenceOffTrap | This trap is sent when the test-sequence is set to OFF on an MCMESC card specified in the source field. The source is a 4 or 5 tuple specifying the type, locat… | ||
| 1.3.6.1.4.1.4253.2163 | NodeluxNselfTestStartedTrap | This trap is sent when self-test has started for a channel card in the specified source field. The source is a 4 or 5 tuple specifying the type, location, shel… | ||
| 1.3.6.1.4.1.4253.2164 | NodeluxNselfTestEndedTrap | This trap is sent when self-test has ended for a channel card in the specified source field. The source is a 4 or 5 tuple specifying the type, location, shelf,… | ||
| 1.3.6.1.4.1.4253.2165 | NodeluxNvoadmMuxSetPointOutOfRange | This trap is sent when a VOADM module has detected that the recently configured mux set point value would bring down the fibre if applied. The set point value … | ||
| 1.3.6.1.4.1.4253.2166 | NodeluxNvoadmDemuxForceConfig | This trap is sent when a VOADM module forces its Demux configuration into fixed power mode. Forcing the Demux mode to fixed power mode can only occur when the … | ||
| 1.3.6.1.4.1.4253.2167 | NodeluxNSfpNotPresent | This trap is sent when a missing SFP is detect. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of t… | ||
| 1.3.6.1.4.1.4253.2168 | NodeluxNSfpPresent | This trap is sent when a SFP has been inserted into the module .The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the … | ||
| 1.3.6.1.4.1.4253.2169 | NodeluxNSfpFailure | This trap is sent when a SFP failure is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of… | ||
| 1.3.6.1.4.1.4253.2170 | NodeluxNSfpFailureResolved | This trap is sent when a SFP failure is resolved. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of… | ||
| 1.3.6.1.4.1.4253.2171 | NodeluxNSfpNotAuthorized | This trap is sent when an unauthorized SFP is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port num… | ||
| 1.3.6.1.4.1.4253.2172 | NodeluxNSfpAuthorized | This trap is sent when an unauthorized SFP is replaced with an authorized SFP. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.2173 | NodeluxNSfpRateMismatch | This trap is sent when a SFP does not supported the user configured line rate. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.2174 | NodeluxNSfpRateMismatchResolved | This trap is sent when a SFP that does not support the user configured line rate is replaced with an SFP that does. The source is a 4 or 5 tuple specifying the… | ||
| 1.3.6.1.4.1.4253.2175 | NodeluxNLinkRxSignalDegraded | This trap is sent when the packet error rate increases over 10e-4. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally t… | ||
| 1.3.6.1.4.1.4253.2176 | NodeluxNLinkRxSignalDegradedResolved | This trap is sent when the packet error rate falls below 10e-4. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the … | ||
| 1.3.6.1.4.1.4253.2177 | NodeluxNLinkTxFault | This trap is sent when a Tx fault is detect on the link port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the po… | ||
| 1.3.6.1.4.1.4253.2178 | NodeluxNLinkTxFaultResolved | This trap is sent when a Tx fault is resolved on the link port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the … | ||
| 1.3.6.1.4.1.4253.2179 | NodeluxNPortTxFault | This trap is sent when a Tx fault is detect on a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port … | ||
| 1.3.6.1.4.1.4253.2180 | NodeluxNPortTxFaultResolved | This trap is sent when a Tx fault is resolved on a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the por… | ||
| 1.3.6.1.4.1.4253.2181 | NodeluxNXfpNotPresent | This trap is sent when a missing XFP is detect. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of t… | ||
| 1.3.6.1.4.1.4253.2182 | NodeluxNXfpPresent | This trap is sent when a XFP has been inserted into the module .The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the … | ||
| 1.3.6.1.4.1.4253.2183 | NodeluxNXfpFailure | This trap is sent when a XFP failure is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of… | ||
| 1.3.6.1.4.1.4253.2184 | NodeluxNXfpFailureResolved | This trap is sent when a XFP failure is resolved. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of… | ||
| 1.3.6.1.4.1.4253.2185 | NodeluxNXfpNotAuthorized | This trap is sent when an unauthorized XFP is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port num… | ||
| 1.3.6.1.4.1.4253.2186 | NodeluxNXfpAuthorized | This trap is sent when an unauthorized XFP is replaced with an authorized XFP. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.2187 | NodeluxNXfpRateMismatch | This trap is sent when a XFP does not supported the user configured line rate. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.4.1.4253.2188 | NodeluxNXfpRateMismatchResolved | This trap is sent when a XFP that does not support the user configured line rate is replaced with a XFP that does. The source is a 4 or 5 tuple specifying the … | ||
| 1.3.6.1.4.1.4253.2189 | NodeluxNCpeXfpNotPresent | This trap is sent when a missing XFP is detect for a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the p… | ||
| 1.3.6.1.4.1.4253.2190 | NodeluxNCpeXfpPresent | This trap is sent when a XFP has been inserted into the module CPE port.The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optiona… | ||
| 1.3.6.1.4.1.4253.2191 | NodeluxNCpeXfpFailure | This trap is sent when a CPE XFP failure is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port numbe… | ||
| 1.3.6.1.4.1.4253.2192 | NodeluxNCpeXfpFailureResolved | This trap is sent when a CPE XFP failure is resolved. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port numbe… | ||
| 1.3.6.1.4.1.4253.2193 | NodeluxNCpeXfpNotAuthorized | This trap is sent when an unauthorized XFP is detected in a CPE prot. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.2194 | NodeluxNCpeXfpAuthorized | This trap is sent when an unauthorized XFP is replaced with an authorized XFP in a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf,… | ||
| 1.3.6.1.4.1.4253.2195 | NodeluxNCpeXfpRateMismatch | This trap is sent when a CPE XFP does not supported the user configured line rate. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, … | ||
| 1.3.6.1.4.1.4253.2196 | NodeluxNCpeXfpRateMismatchResolved | This trap is sent when a CPE XFP that does not support the user configured line rate is replaced with an XFP that does. The source is a 4 or 5 tuple specifying… | ||
| 1.3.6.1.4.1.4253.2197 | NodeluxNOutOfFrame | This trap is sent when an out of frame error is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port n… | ||
| 1.3.6.1.4.1.4253.2198 | NodeluxNOutOfFrameResolved | This trap is sent when an out of frame error is resolved. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port n… | ||
| 1.3.6.1.4.1.4253.2199 | NodeluxNCpeLossOfFrame | This trap is sent when a loss of frame error is detected on a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optiona… | ||
| 1.3.6.1.4.1.4253.2200 | NodeluxNCpeLossOfFrameResolved | This trap is sent when a loss of frame error is resolved on a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optiona… | ||
| 1.3.6.1.4.1.4253.2201 | NodeluxNCpeOutOfFrame | This trap is sent when an out of frame error is detected on a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optiona… | ||
| 1.3.6.1.4.1.4253.2202 | NodeluxNCpeOutOfFrameResolved | This trap is sent when an out of frame error is resolved on a CPE port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optiona… | ||
| 1.3.6.1.4.1.4253.2203 | NodeluxNCdrFailure | This trap is sent when a CDR failure is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of… | ||
| 1.3.6.1.4.1.4253.2204 | NodeluxNCdrFailureResolved | This trap is sent when a CDR failure is resolved. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of… | ||
| 1.3.6.1.4.1.4253.2205 | NodeluxNBitError10Em3 | This trap is sent when the modules bit error rate exceeds 10E-3. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the… | ||
| 1.3.6.1.4.1.4253.2206 | NodeluxNBitError10Em3Resolved | This trap is sent when the modules bit error rate falls below 10E-3. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.2207 | NodeluxNBitError10Em4 | This trap is sent when the modules bit error rate exceeds 10E-4. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the… | ||
| 1.3.6.1.4.1.4253.2208 | NodeluxNBitError10Em4Resolved | This trap is sent when the modules bit error rate falls below 10E-4. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.2209 | NodeluxNBitError10Em6 | This trap is sent when the modules bit error rate exceeds 10E-6. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the… | ||
| 1.3.6.1.4.1.4253.2210 | NodeluxNBitError10Em6Resolved | This trap is sent when the modules bit error rate falls below 10E-6. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.2211 | NodeluxNBitError10Em7 | This trap is sent when the modules bit error rate exceeds 10E-7. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the… | ||
| 1.3.6.1.4.1.4253.2212 | NodeluxNBitError10Em7Resolved | This trap is sent when the modules bit error rate falls below 10E-7. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.2213 | NodeluxNAisReceived | This trap is sent when AIS-L is received on the port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port numbe… | ||
| 1.3.6.1.4.1.4253.2214 | NodeluxNAisReceivedResolved | This trap is sent when AIS-L is no longer received on the port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the … | ||
| 1.3.6.1.4.1.4253.2215 | NodeluxNAisTransmitted | This trap is sent when starts transmitting on the port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port num… | ||
| 1.3.6.1.4.1.4253.2216 | NodeluxNAisTransmittedResolved | This trap is sent when is no longer transmitting on the port. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the po… | ||
| 1.3.6.1.4.1.4253.2225 | NodeluxNcaseTemperatureHiTrap | This trap is sent when case temperature is HI. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of th… | ||
| 1.3.6.1.4.1.4253.2226 | NodeluxNcaseTemperatureNormalTrap | This trap is sent when case temperature is normal. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number o… | ||
| 1.3.6.1.4.1.4253.2227 | NodeluxNcaseTemperatureLoTrap | This trap is sent when case temperature is LO. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of th… | ||
| 1.3.6.1.4.1.4253.2228 | NodeluxNcaseTemperatureLoNormalTrap | This trap is sent when case temperature is normal. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number o… | ||
| 1.3.6.1.4.1.4253.2229 | NodeluxNpumpTemperatureHiTrap | This trap is sent when pump temperature is HI. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of th… | ||
| 1.3.6.1.4.1.4253.2230 | NodeluxNpumpTemperatureNormalTrap | This trap is sent when pump temperature is normal. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number o… | ||
| 1.3.6.1.4.1.4253.2231 | NodeluxNcoilTemperatureHiTrap | This trap is sent when coil temperature is HI. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of th… | ||
| 1.3.6.1.4.1.4253.2232 | NodeluxNcoilTemperatureNormalTrap | This trap is sent when coil temperature is normal. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number o… | ||
| 1.3.6.1.4.1.4253.2233 | NodeluxNlossOutputPowerTrap | This trap is sent when loss of output power (or gain) is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally t… | ||
| 1.3.6.1.4.1.4253.2234 | NodeluxNlossOutputPowerNormalTrap | This trap is sent when loss of output power (or gain) is normal. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the… | ||
| 1.3.6.1.4.1.4253.2235 | NodeluxNreflectedOutputPowerHiTrap | This trap is sent when excessive reflected output power is detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.2236 | NodeluxNreflectedOutputPowerNormalTrap | This trap is sent when reflected output power is normal. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port nu… | ||
| 1.3.6.1.4.1.4253.3001 | NodeluxNlineRateNotSuppoted | This trap is sent to indicate that the module hardware does not support the configured line rate. The source is a 4 or 5 tuple specifying the type, location, s… | ||
| 1.3.6.1.4.1.4253.3002 | NodeluxNmpmBootImageChangedTrap | This trap is sent to indicate that the executable image for the MPM has been changed. Upon reset of the MPM card, this new bootfile will be used. The source is… | ||
| 1.3.6.1.4.1.4253.3003 | NodeluxNdateTimeSetTrap | This trap is sent to indicate that the date and time of the system has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID… | ||
| 1.3.6.1.4.1.4253.3004 | NodeluxNuserAddedTrap | This trap is sent to indicate that a new user has been added to the system. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and opt… | ||
| 1.3.6.1.4.1.4253.3005 | NodeluxNuserDeletedTrap | This trap is sent to indicate that a user has been deleted from the system. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and opt… | ||
| 1.3.6.1.4.1.4253.3006 | NodeluxNuserPasswordChangeTrap | This trap is sent to indicate that the password of one of the user's has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot … | ||
| 1.3.6.1.4.1.4253.3007 | NodeluxNuserLevelModifiedTrap | This trap is sent to indicate that the privilege level of one of the user's has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf… | ||
| 1.3.6.1.4.1.4253.3008 | NodeluxNsystemNameChangeTrap | This trap is sent to indicate that the name of the system has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and opt… | ||
| 1.3.6.1.4.1.4253.3009 | NodeluxNcardAddedTrap | This trap is sent to indicate that a new card has been added to the system through either CLI/SNMP in the specified source field. The source is a 4 or 5 tuple … | ||
| 1.3.6.1.4.1.4253.3010 | NodeluxNcardDeletedTrap | This trap is sent to indicate that a card has been deleted from the system through either CLI/SNMP in the specified source field. The source is a 4 or 5 tuple … | ||
| 1.3.6.1.4.1.4253.3011 | NodeluxNmpmRedundancySwitchOverTrap | This trap is sent to indicate that a mpm switchover has occurred. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally th… | ||
| 1.3.6.1.4.1.4253.3012 | NodeluxNconnectionAddedTrap | This trap is sent to indicate that a connectino has been added to an ofcm/ofcd card. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID… | ||
| 1.3.6.1.4.1.4253.3013 | NodeluxNconnectionDeletedTrap | This trap is sent to indicate that a connection has been deleted from an ofcm/ofcd card. The source is a 4 or 5 tuple specifying the type, location, shelf, slo… | ||
| 1.3.6.1.4.1.4253.3014 | NodeluxNipAddressChangedTrap | This trap is sent to indicate that the IP address has been changed successfully. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, an… | ||
| 1.3.6.1.4.1.4253.3015 | NodeluxNipNetmaskChangedTrap | This trap is sent to indicate that the netmask has been changed successfully. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and o… | ||
| 1.3.6.1.4.1.4253.3016 | NodeluxNdefaultGatewayChangedTrap | This trap is sent to indicate that the default gateway has been changed successfully. The source is a 4 or 5 tuple specifying the type, location, shelf, slot I… | ||
| 1.3.6.1.4.1.4253.3017 | NodeluxNGetCommunityChangeTrap | This trap is sent to indicate that the getcommunity has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.3018 | NodeluxNSetCommunityChangeTrap | This trap is sent to indicate that the setcommunity has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.3019 | NodeluxNModuleResetTrap | This trap is sent to indicate that a module has been reset. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port… | ||
| 1.3.6.1.4.1.4253.3020 | NodeluxNtopologyRediscoveredTrap | This trap is sent to indicate that the topology database has been rediscovered which is triggered through either CLI or snmp. The source is a 4 or 5 tuple spec… | ||
| 1.3.6.1.4.1.4253.3021 | NodeluxNcolorsimEnabledTrap | This trap is sent to indicate that the ColorSIM feature has been enabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optio… | ||
| 1.3.6.1.4.1.4253.3022 | NodeluxNcolorsimDisabledTrap | This trap is sent to indicate that the ColorSIM feature has been disabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and opti… | ||
| 1.3.6.1.4.1.4253.3023 | NodeluxNautoCutoffEnabledTrap | This trap is sent to indicate that the auto cutoff feature has been enabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and op… | ||
| 1.3.6.1.4.1.4253.3024 | NodeluxNautoCutoffDisabledTrap | This trap is sent to indicate that the auto cutoff feature has been disabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and o… | ||
| 1.3.6.1.4.1.4253.3025 | NodeluxNextAlarmsEnabledTrap | This trap is sent to indicate that the external alarm closures have been enabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, a… | ||
| 1.3.6.1.4.1.4253.3026 | NodeluxNextAlarmsDisabledTrap | This trap is sent to indicate that the external alarm closures have been disabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, … | ||
| 1.3.6.1.4.1.4253.3027 | NodeluxNdlModuleActivatedTrap | This trap is sent to indicate that a module activation, switching to another module image version, has occurred. The source is a 4 or 5 tuple specifying the ty… | ||
| 1.3.6.1.4.1.4253.3032 | NodeluxNhttpEnabledTrap | This trap is sent to indicate that the http server has been enabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.3033 | NodeluxNhttpDisabledTrap | This trap is sent to indicate that the http server has been disabled. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.3034 | NodeluxNstaticRouteAddedTrap | This trap is sent to indicate that a new route has been added to the system through either CLI/SNMP in the specified source field. The source is a 4 or 5 tuple… | ||
| 1.3.6.1.4.1.4253.3035 | NodeluxNstaticRouteDeletedTrap | This trap is sent to indicate that a route has been deleted from the system through either CLI/SNMP in the specified source field. The source is a 4 or 5 tuple… | ||
| 1.3.6.1.4.1.4253.3036 | NodeluxNupsrProtectionSwitchOverSrc | This trap is sent to indicate that UPSR protection switch over occurred on the source either through SNMP or CLI. If the module type is OCM for this trap, then… | ||
| 1.3.6.1.4.1.4253.3037 | NodeluxNupsrProtectionSwitchOverDest | This trap is sent to indicate that UPSR protection switch over occurred on the destination either through SNMP or CLI. If the module type is OCM for this trap,… | ||
| 1.3.6.1.4.1.4253.3038 | NodeluxNimnIpAddressChanged | This trap is sent to indicate that a IMN Ip address is successfully changed either through SNMP or CLI. The source is a 4 or 5 tuple specifying the type, locat… | ||
| 1.3.6.1.4.1.4253.3039 | NodeluxNupsrNormal | This trap is sent to indicate that UPSR is successfully enabled either through SNMP or CLI on the system. This is done once UPSR functionality is normal on the… | ||
| 1.3.6.1.4.1.4253.3040 | NodeluxNupsrDegraded | This trap is sent to indicate that UPSR is successfully disabled either through SNMP, CLI or SPI driver on the system. This is done after the UPSR functionalit… | ||
| 1.3.6.1.4.1.4253.3041 | NodeluxNusrOneAlarmAction | This trap is sent to indicate that user has performed acknowledgment/ unacknowledgment/Clearing of a single alarm in the alarm log either through SNMP or CLI .… | ||
| 1.3.6.1.4.1.4253.3042 | NodeluxNusrAllAlarmAction | This trap is sent to indicate that user has performed acknowledgment/ unacknowledgment/Clearing of all alarms in the alarm log either through SNMP or CLI . The… | ||
| 1.3.6.1.4.1.4253.3047 | NodeluxNringConfigurationChanged | This trap is sent to indicate that the user has changed the ring configuration either through deletion or addition of ringId or pathId. The source is a 4 or 5 … | ||
| 1.3.6.1.4.1.4253.3048 | NodeluxNeventLogCleared | This trap is sent to indicate that the user has cleared the event log either through CLI or SNMP. The source is a 4 or 5 tuple specifying the type, location, s… | ||
| 1.3.6.1.4.1.4253.3049 | NodeluxNextAlarmInpTrap | This trap is sent when an user sets up alarm severity (crit/maj/minor/disable) on external alarm input. The source is a 4 or 5 tuple specifying the type, locat… | ||
| 1.3.6.1.4.1.4253.3050 | NodeluxNextAudioAlarmTrap | This trap is sent when an user enables or disables audio alarm. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the … | ||
| 1.3.6.1.4.1.4253.3051 | NodeluxNTrapHostConfigChangeTrap | This trap is sent when a trap host is added, deleted, or modified (port configuration). The source is a 4 or 5 tuple specifying the type, location, shelf, slot… | ||
| 1.3.6.1.4.1.4253.3052 | NodeluxNTrapHostImnRouteEnabled | |||
| 1.3.6.1.4.1.4253.3053 | NodeluxNTrapHostImnRouteDisabled | |||
| 1.3.6.1.4.1.4253.3054 | NodeluxNTrapHostAutoUpdateEnabled | |||
| 1.3.6.1.4.1.4253.3055 | NodeluxNTrapHostAutoUpdateDisabled | |||
| 1.3.6.1.4.1.4253.3056 | NodeluxNTrapPathAdded | This trap is sent when a path is configured. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of the … | ||
| 1.3.6.1.4.1.4253.3057 | NodeluxNTrapPathDeleted | This trap is sent when a path is deleted. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port number of the sou… | ||
| 1.3.6.1.4.1.4253.3058 | NodeluxNdlModuleActivateFailedTrap | This trap is sent when a module activation, switching to another module image version, has failed. The source is a 4 or 5 tuple specifying the type, location, … | ||
| 1.3.6.1.4.1.4253.3059 | NodeluxNLogServerAddedTrap | This trap is sent when a syslog server has been added. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port numb… | ||
| 1.3.6.1.4.1.4253.3060 | NodeluxNLogServerDeletedTrap | This trap is sent when a syslog server has been deleted. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port nu… | ||
| 1.3.6.1.4.1.4253.3061 | NodeluxNLogMaskChangedTrap | This trap is sent when the syslog mask has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port nu… | ||
| 1.3.6.1.4.1.4253.3062 | NodeluxNRadiusAuthChangedTrap | This trap is sent when the radius authentication order has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and option… | ||
| 1.3.6.1.4.1.4253.3063 | NodeluxNRadiusDefaultRealmChangedTrap | This trap is sent when the radius default realm has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally th… | ||
| 1.3.6.1.4.1.4253.3064 | NodeluxNRadiusNasIdChangedTrap | This trap is sent when the radius NAS Identifier has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally t… | ||
| 1.3.6.1.4.1.4253.3065 | NodeluxNRadiusRetriesChangedTrap | This trap is sent when the radius retries has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port… | ||
| 1.3.6.1.4.1.4253.3066 | NodeluxNRadiusServerAddedTrap | This trap is sent when a radius server has been added. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port numb… | ||
| 1.3.6.1.4.1.4253.3067 | NodeluxNRadiusServerDeletedTrap | This trap is sent when radius server has been deleted. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port numb… | ||
| 1.3.6.1.4.1.4253.3068 | NodeluxNRadiusServerModifiedTrap | This trap is sent when radius server port or secret has been modified. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optional… | ||
| 1.3.6.1.4.1.4253.3069 | NodeluxNRadiusTimeoutChangedTrap | This trap is sent when the radius timeout has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port… | ||
| 1.3.6.1.4.1.4253.3070 | NodeluxNSshEnabledTrap | This trap is sent when the SSHD has been enabled. The source is a 4 or 5 tuple specifying the type location, shelf, slot ID, and optionally the port number of … | ||
| 1.3.6.1.4.1.4253.3071 | NodeluxNSshDisabledTrap | This trap is sent when the SSHD has been disabled. The source is a 4 or 5 tuple specifying the type location, shelf, slot ID, and optionally the port number of… | ||
| 1.3.6.1.4.1.4253.3072 | NodeluxNSshKeySizeSetTrap | This trap is sent when the SSHD key size has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally the port … | ||
| 1.3.6.1.4.1.4253.3073 | NodeluxNSshMaxSessionsSetTrap | This trap is sent when the telnet/SSHD max sessions has been changed. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionall… | ||
| 1.3.6.1.4.1.4253.3074 | NodeluxNSshKeyGeneratedTrap | This trap is sent when the SSH DSS key has finished being generated. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.4000 | NodeluxNlogonIntruderTrap | This trap is sent to indicate that someone is repeatly trying to logon using an invalid password. The source is a 4 or 5 tuple specifying the type, location, s… | ||
| 1.3.6.1.4.1.4253.4001 | NodeluxNlogonSessionStarted | This trap is sent to indicate that a user has logged into the MPM. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally t… | ||
| 1.3.6.1.4.1.4253.4002 | NodeluxNlogonSessionClosed | This trap is sent to indicate that a user has logged out of the MPM. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and optionally… | ||
| 1.3.6.1.4.1.4253.4003 | NodeluxNcpAuthenticationErrorTrap | This trap is sent to indicate that an invalid login attempt has been detected. The source is a 4 or 5 tuple specifying the type, location, shelf, slot ID, and … | ||
| 1.3.6.1.5 | Nodesecurity | |||
| 1.3.6.1.5.1 | NodeuserSecMgmt | |||
| 1.3.6.1.5.1.1 | ScalarusrNumUsers | read-only | mandatory | Number of user Logons in the table below. This counter is automatically set by the software. |
| 1.3.6.1.5.1.2 | TableusrSecTable | not-accessible | mandatory | This table represents the information for each user logon entry. |
| 1.3.6.1.5.1.2.1 | RowusrSecEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.5.1.2.1.1 | ColumnusrSecLogonId | read-write | mandatory | The unique logon ID assigned to each user. This field should only be written by users that are in the right security role. |
| 1.3.6.1.5.1.2.1.2 | ColumnusrSecPasswd | read-write | mandatory | The hashed password for each unique logon ID. To turn the user account off, typically the password is set to some fixed value. Fixed passwords are not accepted… |
| 1.3.6.1.5.1.2.1.3 | ColumnusrSecRole | read-write | mandatory | The role associated with each user logon ID. This is an index into the system role(s) table. |
| 1.3.6.1.5.1.2.1.4 | ColumnusrSecFullName | read-write | mandatory | The full name of the user associated with each unique logon ID. |
| 1.3.6.1.5.1.2.1.5 | ColumnusrSecActDateTime | read-only | mandatory | The Time & Date of the user account activation. |
| 1.3.6.1.5.1.2.1.6 | ColumnusrSecLastDateTime | read-only | mandatory | The Time & Date of the last user logon to the system |
| 1.3.6.1.5.1.2.1.7 | ColumnusrSecSetLastDateTime | read-write | mandatory | An action to set the Time & Date of the last user logon to the current systemtime. |
| 1.3.6.1.5.2 | NodesystemSecMgmt | |||
| 1.3.6.1.5.2.1 | ScalarsecNumRoles | not-accessible | mandatory | Number of system security roles in the table below. This counter is automatically set by the software. |
| 1.3.6.1.5.2.2 | TablesecRoleTable | not-accessible | mandatory | This table represents the information for each system security role entry. |
| 1.3.6.1.5.2.2.1 | RowsecRoleEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.5.2.2.1.1 | ColumnsecRole | not-accessible | mandatory | Each row in this table defines a unique security role. |
| 1.3.6.1.5.2.2.1.2 | ColumnsecRoleDescr | not-accessible | mandatory | The full narrated description of each security Role. |
| 1.3.6.1.5.2.3 | ScalarsecNumGroups | not-accessible | mandatory | Number of entity groups in the table below. This counter is automatically set by the software. |
| 1.3.6.1.5.2.4 | TablesecGroupTable | not-accessible | mandatory | This table represents the information for each entity group entry. |
| 1.3.6.1.5.2.4.1 | RowsecGroupEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.5.2.4.1.1 | ColumnsecGroup | not-accessible | mandatory | Each row in this table defines a grouping of entities or elements from the MIB. |
| 1.3.6.1.5.2.4.1.2 | ColumnsecGroupRole | not-accessible | mandatory | The containment of this group within a security role. Under the given schema, each Role may have zero or more entity groups. Given an entity group, it may have… |
| 1.3.6.1.5.2.5 | ScalarsecNumElements | not-accessible | mandatory | Number of elements or entities in the table below. This counter is automatically set by the software. |
| 1.3.6.1.5.2.6 | TablesecElementTable | not-accessible | mandatory | This table represents the information for each entity or element in the MIB. |
| 1.3.6.1.5.2.6.1 | RowsecElementEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.5.2.6.1.1 | ColumnsecElement | not-accessible | mandatory | Each row in this table defines an element or entity from the MIB. |
| 1.3.6.1.5.2.6.1.2 | ColumnsecElementAccess | not-accessible | mandatory | The original access mode for this element from the MIB. |
| 1.3.6.1.5.2.6.1.3 | ColumnsecElementOID | not-accessible | mandatory | The original SNMP OID for this element from the MIB. |
| 1.3.6.1.5.2.6.1.4 | ColumnsecElementType | not-accessible | mandatory | The original type for this element from the MIB. |
| 1.3.6.1.5.2.6.1.5 | ColumnsecElementParent | not-accessible | mandatory | The original parent name for this element from the MIB. The parent is either a table or a subgroup. |
| 1.3.6.1.5.2.7 | ScalarsecNumElmntGrp | not-accessible | mandatory | Number of element-to-group mappings in the table below. This counter is automatically set by the software. |
| 1.3.6.1.5.2.8 | TablesecElmntGrpTable | not-accessible | mandatory | This table represents the information for each element-to-group mapping. |
| 1.3.6.1.5.2.8.1 | RowsecElmntGrpEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.5.2.8.1.1 | ColumnelmntName | not-accessible | mandatory | Each row in this table defines a mapping of elements to groups. This column is an index into the secElementTable. |
| 1.3.6.1.5.2.8.1.2 | ColumngrpName | not-accessible | mandatory | Each row in this table defines a mapping of elements to groups. This column is an index into the secGroupTable. |
| 1.3.6.1.5.2.8.1.3 | ColumnelmntGrpAccess | not-accessible | mandatory | The access mode assigned to each element/group entry. Under the given schema, each group may have zero or more MIB elements. Given an element, it may have been… |
| 1.3.6.1.5.3 | NodenetSecMgmt | |||
| 1.3.6.1.5.3.1 | NoderadiusSecMgmt | |||
| 1.3.6.1.5.3.1.1 | ScalarradiusAuthOrder | read-write | mandatory | The authentication order used when validating a user login id and password. |
| 1.3.6.1.5.3.1.2 | ScalarradiusNasIdentifier | read-write | mandatory | NAS-Identifier for the MPM. |
| 1.3.6.1.5.3.1.3 | ScalarradiusDefaultRealm | read-write | mandatory | Default realm used for radius authentication. This realm is not used for local authentication. |
| 1.3.6.1.5.3.1.4 | ScalarradiusTimeout | read-write | mandatory | Timeout when sending an authentication request to a radius server. |
| 1.3.6.1.5.3.1.5 | ScalarradiusRetries | read-write | mandatory | Number of times to resend requests when a timeout occurs. |
| 1.3.6.1.5.3.1.6 | TableradiusSecTable | not-accessible | mandatory | Radius server table. |
| 1.3.6.1.5.3.1.6.1 | RowradiusSecEntry | not-accessible | mandatory | Specifies the index for each row in the table below |
| 1.3.6.1.5.3.1.6.1.1 | ColumnradiusServerIndex | read-only | mandatory | Index into the radius server table. This index also specifies the server order used for sending authentication requests. |
| 1.3.6.1.5.3.1.6.1.2 | ColumnradiusServerAddress | read-write | mandatory | IP address of the radius server. Setting the address to 0 will delete the server entry. |
| 1.3.6.1.5.3.1.6.1.3 | ColumnradiusServerPort | read-write | mandatory | Radius port used for authentication requests. |
| 1.3.6.1.5.3.1.6.1.4 | ColumnradiusServerSecret | read-write | mandatory | Secret shared with authentication server. |
| 1.3.6.1.5.3.1.7 | ScalarradiusAddServer | read-write | mandatory | Add server to the server table. Servers are added to the first available entry in the server table. To add a server provide server IP address, radius port, and… |
| 1.3.6.1.5.3.2 | NodesshSecMgmt | |||
| 1.3.6.1.5.3.2.1 | ScalarsshMode | read-write | mandatory | Enables or disables the SSH server. Enabling SSH will disable the built in telnet server. Disabling SSH will enable the telnet server. |
| 1.3.6.1.5.3.2.2 | ScalarsshKeySize | read-write | mandatory | The size (in bits) of the DSS key to generate. Key size must be a multiple of 8 and between 512 and 1024 bits. |
| 1.3.6.1.5.3.2.3 | ScalarsshMaxSessions | read-write | mandatory | The maximum number of SSH sessions that can be active at one time. Setting this element will also affect the number of telnet sessions that can be active at a … |
| 1.3.6.1.5.3.2.4 | ScalarsshGenKey | read-write | mandatory | Setting this element to genDssKey(2) will cause a new DSS key to be generated. The process of generating a new key can take some time (several minutes) and may… |