Lambdatrail2s-MIB
149 objects
The MIB module for managing Deltanet Lambdatrail2-S device. Needs firmware 1.1.0 or higher.
Imported Objects
| Deltanet-MIB | deltanet |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35616.5 | Identitylambdatrail2s | The MIB module for managing Deltanet Lambdatrail2-S device. Needs firmware 1.1.0 or higher. | ||
| 1.3.6.1.4.1.35616.5.0 | Nodelt2sNotifications | |||
| 1.3.6.1.4.1.35616.5.0.1 | Notificationlt2sMgmtStartup | current | The agent has started up and is running. | |
| 1.3.6.1.4.1.35616.5.0.2 | Notificationlt2sMgmtAuthenticationFailure | current | Login has failed. | |
| 1.3.6.1.4.1.35616.5.0.3 | Notificationlt2sTemperatureHigh | current | Device temperature is high. | |
| 1.3.6.1.4.1.35616.5.0.4 | Notificationlt2sTemperatureNormal | current | Device temperature is back to normal. Lower than 40 degrees celsius. | |
| 1.3.6.1.4.1.35616.5.0.5 | Notificationlt2sPowerSupplyPluggedIn | current | A power is plugged in. | |
| 1.3.6.1.4.1.35616.5.0.6 | Notificationlt2sPowerSupplyPluggedOut | current | A power is plugged out. | |
| 1.3.6.1.4.1.35616.5.0.7 | Notificationlt2sPowerNormal | current | A power goes on. | |
| 1.3.6.1.4.1.35616.5.0.8 | Notificationlt2sPowerFailure | current | A power goes off. | |
| 1.3.6.1.4.1.35616.5.0.9 | Notificationlt2sFanOn | current | A fan goes on. | |
| 1.3.6.1.4.1.35616.5.0.10 | Notificationlt2sFanOff | current | A fan goes off. | |
| 1.3.6.1.4.1.35616.5.0.11 | Notificationlt2sFanFailure | current | A fan goes to failure. | |
| 1.3.6.1.4.1.35616.5.0.12 | Notificationlt2sMgmtSfpPluggedIn | current | SFP transceiver is plugged in on management port. | |
| 1.3.6.1.4.1.35616.5.0.13 | Notificationlt2sMgmtSfpPluggedOut | current | SFP transceiver is plugged out on management port. | |
| 1.3.6.1.4.1.35616.5.0.14 | Notificationlt2sMgmtLinkUp | current | A link goes up in one of the management ports. | |
| 1.3.6.1.4.1.35616.5.0.15 | Notificationlt2sMgmtLinkDown | current | A link goes down in one of the management ports. | |
| 1.3.6.1.4.1.35616.5.0.16 | Notificationlt2sMgmtTxLow | current | Transceiver TX power is low in the management port. | |
| 1.3.6.1.4.1.35616.5.0.17 | Notificationlt2sMgmtTxHigh | current | Transceiver TX power is high in the management port. | |
| 1.3.6.1.4.1.35616.5.0.18 | Notificationlt2sMgmtTxNormal | current | Transceiver TX power is normal in the management port. | |
| 1.3.6.1.4.1.35616.5.0.19 | Notificationlt2sMgmtRxLow | current | Transceiver RX power is low in the management port. | |
| 1.3.6.1.4.1.35616.5.0.20 | Notificationlt2sMgmtRxHigh | current | Transceiver RX power is high in the management port. | |
| 1.3.6.1.4.1.35616.5.0.21 | Notificationlt2sMgmtRxNormal | current | Transceiver RX power is normal in the management port. | |
| 1.3.6.1.4.1.35616.5.0.22 | Notificationlt2sPortEnabled | current | Port is administrative enabled. | |
| 1.3.6.1.4.1.35616.5.0.23 | Notificationlt2sPortDisabled | current | Port is administrative disabled. | |
| 1.3.6.1.4.1.35616.5.0.24 | Notificationlt2sPortReseted | current | A reset in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.25 | Notificationlt2sPortThermalShutdown | current | A thermal shut down in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.26 | Notificationlt2sPortThermalWakeup | current | A thermal wakeup in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.27 | Notificationlt2sLinePluggedIn | current | A SFP transceiver is plugged in, on one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.28 | Notificationlt2sClientPluggedIn | current | A SFP transceiver is plugged in, on one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.29 | Notificationlt2sLinePluggedOut | current | A SFP transceiver is plugged out, on one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.30 | Notificationlt2sClientPluggedOut | current | A SFP transceiver is plugged out, on one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.31 | Notificationlt2sLineLinkUp | current | A SFP transceiver's link goes up in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.32 | Notificationlt2sClientLinkUp | current | A SFP transceiver's link goes up in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.33 | Notificationlt2sLineLinkDown | current | A SFP transceiver's link goes down in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.34 | Notificationlt2sClientLinkDown | current | A SFP transceiver's link goes down in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.35 | Notificationlt2sLineLoopOn | current | A Line loop is activated in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.36 | Notificationlt2sLineLoopOff | current | A Line loop is turned off in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.37 | Notificationlt2sClientLoopOn | current | A Client loop is activated in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.38 | Notificationlt2sClientLoopOff | current | A Client loop is turned off in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.39 | Notificationlt2sPortTxLow | current | A SFP transceiver TX power is low in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.40 | Notificationlt2sPortTxHigh | current | A SFP transceiver TX power is high in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.41 | Notificationlt2sPortTxNormal | current | A SFP transceiver TX power is normal in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.42 | Notificationlt2sPortRxLow | current | A SFP transceiver RX power is low in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.43 | Notificationlt2sPortRxHigh | current | A SFP transceiver RX power is high in one of the ports. | |
| 1.3.6.1.4.1.35616.5.0.44 | Notificationlt2sPortRxNormal | current | A SFP transceiver RX power is normal in one of the ports. | |
| 1.3.6.1.4.1.35616.5.1 | Nodelt2sAgent | |||
| 1.3.6.1.4.1.35616.5.1.1 | Scalarlt2sDescription | read-only | current | Shows the System Description. |
| 1.3.6.1.4.1.35616.5.1.2 | Scalarlt2sDeviceType | read-only | current | Shows the Device Type. |
| 1.3.6.1.4.1.35616.5.1.3 | Scalarlt2sHwRevision | read-only | current | Shows the Device Type. |
| 1.3.6.1.4.1.35616.5.1.4 | Scalarlt2sManufacturingDate | read-only | current | Shows the Device Type. |
| 1.3.6.1.4.1.35616.5.1.5 | Scalarlt2sSerialNumber | read-only | current | Shows the serial number of the device. |
| 1.3.6.1.4.1.35616.5.1.6 | Scalarlt2sSystemName | read-write | current | The assigned system name. |
| 1.3.6.1.4.1.35616.5.1.7 | Scalarlt2sSystemLocation | read-write | current | System location. |
| 1.3.6.1.4.1.35616.5.1.8 | Scalarlt2sSystemContact | read-write | current | The responsible person. |
| 1.3.6.1.4.1.35616.5.1.9 | Scalarlt2sSystemUptime | read-only | current | Shows the time since the last restart of the management agent. |
| 1.3.6.1.4.1.35616.5.1.10 | Scalarlt2sFirmwareVersion | read-only | current | Shows the software version of the agent running image. |
| 1.3.6.1.4.1.35616.5.1.11 | Scalarlt2suCVersion | read-only | current | Shows the firmware version of the micro controller. |
| 1.3.6.1.4.1.35616.5.1.12 | Scalarlt2sSaveRunningCfg | read-write | current | Set this variable will save current configuration. The value is set back to 1 after succeed. |
| 1.3.6.1.4.1.35616.5.1.13 | Scalarlt2sResetAgent | read-write | current | Set this variable will reset the agent. The value is set back to 1 after reset. |
| 1.3.6.1.4.1.35616.5.1.14 | Scalarlt2sSnmpGetCommunity | read-write | current | The get community, read only. |
| 1.3.6.1.4.1.35616.5.1.15 | Scalarlt2sSnmpSetCommunity | read-write | current | The set community, read/write. |
| 1.3.6.1.4.1.35616.5.1.16 | Scalarlt2sIp4DHCP | read-write | current | DHCP enable or disable. Default is off |
| 1.3.6.1.4.1.35616.5.1.17 | Scalarlt2sIp4Address | read-write | current | The agent's administrative IP address. The current operational IP address can be obtained from the ipAdEntAddr in the ipAddrTable. This parameter will take eff… |
| 1.3.6.1.4.1.35616.5.1.18 | Scalarlt2sIp4Mask | read-write | current | The agent's administrative IP subnet mask. The current operational IP subnet mask can be obtained from the ipAdEntMask in the ipAddrTable. This parameter will … |
| 1.3.6.1.4.1.35616.5.1.19 | Scalarlt2sIp4Gateway | read-write | current | The agent's administrative default gateway IP address. The current operational IP default gateway IP address can be obtained from the ipRouteDest in the ipRout… |
| 1.3.6.1.4.1.35616.5.1.20 | Scalarlt2sIp4PrimaryDns | read-write | current | First DNS server address. |
| 1.3.6.1.4.1.35616.5.1.21 | Scalarlt2sIp4SecondaryDns | read-write | current | Second DNS server address. |
| 1.3.6.1.4.1.35616.5.1.22 | Scalarlt2sSnmpServer | read-write | current | |
| 1.3.6.1.4.1.35616.5.1.23 | Scalarlt2sHttpServer | read-write | current | |
| 1.3.6.1.4.1.35616.5.1.24 | Scalarlt2sTelnetServer | read-write | current | |
| 1.3.6.1.4.1.35616.5.1.25 | Scalarlt2sFtpServer | read-write | current | |
| 1.3.6.1.4.1.35616.5.1.26 | Tablelt2sMgmtPortTable | not-accessible | current | A list of management port entries. |
| 1.3.6.1.4.1.35616.5.1.26.1 | Rowlt2sMgmtPortEntry | not-accessible | current | An entry containing information applicable to the management ports. |
| 1.3.6.1.4.1.35616.5.1.26.1.1 | Columnlt2sMgmtPortId | read-only | current | The management port identification. 1 Inband SFP, 2 LAN1, 3 LAN2. |
| 1.3.6.1.4.1.35616.5.1.26.1.2 | Columnlt2sMgmtPortName | read-only | current | The name of the management port |
| 1.3.6.1.4.1.35616.5.1.26.1.3 | Columnlt2sMgmtPortEnable | read-write | current | The enabled state of the port. |
| 1.3.6.1.4.1.35616.5.1.26.1.4 | Columnlt2sMgmtPortLink | read-only | current | The link state of the management port. |
| 1.3.6.1.4.1.35616.5.1.26.1.5 | Columnlt2sMgmtPortSpeed | read-only | current | The speed mode of the port. |
| 1.3.6.1.4.1.35616.5.1.26.1.6 | Columnlt2sMgmtPortTxBytes | read-only | current | The total amount of sent bytes. |
| 1.3.6.1.4.1.35616.5.1.26.1.7 | Columnlt2sMgmtPortRxBytes | read-only | current | The total amount of received bytes. |
| 1.3.6.1.4.1.35616.5.1.26.1.8 | Columnlt2sMgmtSfpPlugged | read-only | current | The line SFP plugged state of the port. |
| 1.3.6.1.4.1.35616.5.1.26.1.9 | Columnlt2sMgmtSfpVendor | read-only | current | The vendor name of the SFP. |
| 1.3.6.1.4.1.35616.5.1.26.1.10 | Columnlt2sMgmtSfpType | read-only | current | The vendor part name of the SFP. |
| 1.3.6.1.4.1.35616.5.1.26.1.11 | Columnlt2sMgmtSfpSerial | read-only | current | The serial number of the SFP. |
| 1.3.6.1.4.1.35616.5.1.26.1.12 | Columnlt2sMgmtSfpWavelength | read-only | current | The SFP wavelength of the port. If the SFP is removed the object contains 'NA'. |
| 1.3.6.1.4.1.35616.5.1.26.1.13 | Columnlt2sMgmtSfpTxPower | read-only | current | The SFP transmit power of the port. If the SFP is removed, the value is -1. |
| 1.3.6.1.4.1.35616.5.1.26.1.14 | Columnlt2sMgmtSfpRxPower | read-only | current | The SFP receive power of the port. If the SFP is removed, the value is -1. |
| 1.3.6.1.4.1.35616.5.1.26.1.15 | Columnlt2sMgmtSfpLaserTemp | read-only | current | The internal temperature of the SFP. If the SFP is removed, the value is -1. |
| 1.3.6.1.4.1.35616.5.1.26.1.16 | Columnlt2sMgmtSfpLaserBias | read-only | current | The SFP laser bias in milli ampere. If the SFP is removed, the value is -1. |
| 1.3.6.1.4.1.35616.5.1.26.1.17 | Columnlt2sMgmtSfpTxLow | read-write | current | The SFP laser TX low threshold in dBm. |
| 1.3.6.1.4.1.35616.5.1.26.1.18 | Columnlt2sMgmtSfpTxHigh | read-write | current | The SFP laser TX high threshold in dBm. |
| 1.3.6.1.4.1.35616.5.1.26.1.19 | Columnlt2sMgmtSfpRxLow | read-write | current | The SFP laser RX low threshold in dBm. |
| 1.3.6.1.4.1.35616.5.1.26.1.20 | Columnlt2sMgmtSfpRxHigh | read-write | current | The SFP laser RX high threshold in dBm. |
| 1.3.6.1.4.1.35616.5.2 | Nodelt2sSystem | |||
| 1.3.6.1.4.1.35616.5.2.1 | Scalarlt2sTemperature | read-only | current | Shows the ambient temperature. |
| 1.3.6.1.4.1.35616.5.2.2 | Scalarlt2sPowerType | read-only | current | The device's power supply 1 type. |
| 1.3.6.1.4.1.35616.5.2.3 | Scalarlt2sPowerStatus | read-only | current | The device's power supply 1 status. |
| 1.3.6.1.4.1.35616.5.2.4 | Scalarlt2sPowerFanStatus | read-only | current | The device's power supply 1's fan status. |
| 1.3.6.1.4.1.35616.5.2.5 | Scalarlt2sPowerFanRPM | read-only | current | The device's power supply 1's fan rounds per minute. |
| 1.3.6.1.4.1.35616.5.2.6 | Scalarlt2sPowerFanMode | read-write | current | The device's power supply 1's fan mode. |
| 1.3.6.1.4.1.35616.5.2.7 | Scalarlt2sPowerFanOnTemp | read-write | current | The device's power supply 1's fan on temperature. |
| 1.3.6.1.4.1.35616.5.2.8 | Scalarlt2sPowerFanOffTemp | read-write | current | The device's power supply 1's fan off temperature. |
| 1.3.6.1.4.1.35616.5.3 | Nodelt2sPorts | |||
| 1.3.6.1.4.1.35616.5.3.1 | Tablelt2sPortTable | not-accessible | current | A list of port table entries. |
| 1.3.6.1.4.1.35616.5.3.1.1 | Rowlt2sPortEntry | not-accessible | current | An entry containing information applicable to a particular port. |
| 1.3.6.1.4.1.35616.5.3.1.1.1 | Columnlt2sPortId | read-only | current | A unique value for each port. |
| 1.3.6.1.4.1.35616.5.3.1.1.2 | Columnlt2sPortEnable | read-write | current | The status of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.3 | Columnlt2sPortApsd | read-write | current | The automatic power shut down configuration of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.4 | Columnlt2sPortSpeed | read-write | current | The speed mode of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.5 | Columnlt2sPortReset | read-write | current | Reset the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.6 | Columnlt2sPortLoop | read-write | current | Set Loop on chosen port. |
| 1.3.6.1.4.1.35616.5.3.1.1.7 | Columnlt2sPortName | read-write | current | The name of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.8 | Columnlt2sLinePlugged | read-only | current | The line SFP plugged state of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.9 | Columnlt2sLineLink | read-only | current | The line SFP link state of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.10 | Columnlt2sLineApsd | read-only | current | The automatic power shut down state of the line port. |
| 1.3.6.1.4.1.35616.5.3.1.1.11 | Columnlt2sLineType | read-only | current | The line SFP type of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.12 | Columnlt2sLineWavelength | read-only | current | The line SFP wavelength of the port. If the line SFP is not plugged in, the object should contain the value of 'NA'. |
| 1.3.6.1.4.1.35616.5.3.1.1.13 | Columnlt2sLineTxPower | read-only | current | The line SFP transmit power of the port. If the line SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.14 | Columnlt2sLineRxPower | read-only | current | The line SFP receive power of the port. If the line SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.15 | Columnlt2sLineLaserTemp | read-only | current | The line SFP laser temperature of the port. If the line SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.16 | Columnlt2sLineLaserBias | read-only | current | The line SFP laser bias of the port. If the line SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.17 | Columnlt2sLineTxLow | read-write | current | The line SFP laser TX low threshold of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.18 | Columnlt2sLineTxHigh | read-write | current | The line SFP laser TX high threshold of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.19 | Columnlt2sLineRxLow | read-write | current | The line SFP laser RX low threshold of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.20 | Columnlt2sLineRxHigh | read-write | current | The line SFP laser RX high threshold of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.21 | Columnlt2sClientPlugged | read-only | current | The client SFP plugged state of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.22 | Columnlt2sClientLink | read-only | current | The client SFP link state of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.23 | Columnlt2sClientApsd | read-only | current | The automatic power shut down state of the client port. |
| 1.3.6.1.4.1.35616.5.3.1.1.24 | Columnlt2sClientType | read-only | current | The client SFP type of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.25 | Columnlt2sClientWavelength | read-only | current | The client SFP wavelength of the port. If the client SFP is not plugged in, the object should contain the value of 'NA'. |
| 1.3.6.1.4.1.35616.5.3.1.1.26 | Columnlt2sClientTxPower | read-only | current | The client SFP transmit power of the port. If the client SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.27 | Columnlt2sClientRxPower | read-only | current | The client SFP receive power of the port. If the client SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.28 | Columnlt2sClientLaserTemp | read-only | current | The client SFP laser temperature of the port. If the client SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.29 | Columnlt2sClientLaserBias | read-only | current | The client SFP laser bias of the port. If the client SFP is not plugged in, the object should contain the value of -1. |
| 1.3.6.1.4.1.35616.5.3.1.1.30 | Columnlt2sClientTxLow | read-write | current | The client SFP laser TX low threshold of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.31 | Columnlt2sClientTxHigh | read-write | current | The client SFP laser TX high threshold of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.32 | Columnlt2sClientRxLow | read-write | current | The client SFP laser RX low threshold of the port. |
| 1.3.6.1.4.1.35616.5.3.1.1.33 | Columnlt2sClientRxHigh | read-write | current | The client SFP laser RX high threshold of the port. |
| 1.3.6.1.4.1.35616.5.4 | Nodelt2sInfo | |||
| 1.3.6.1.4.1.35616.5.4.1 | Scalarlt2sTrapDetails | read-only | current | The trap description. |
| 1.3.6.1.4.1.35616.5.8 | Nodelt2sCompliances | |||
| 1.3.6.1.4.1.35616.5.8.1 | Compliancelt2sCompliance | current | Describes the requirements for conformance to the Lambdatrail2 MIB part. | |
| 1.3.6.1.4.1.35616.5.9 | Nodelt2sGroups | |||
| 1.3.6.1.4.1.35616.5.9.1 | Grouplt2sAgentGroup | current | Grouping all LT2-S Agent parameters. | |
| 1.3.6.1.4.1.35616.5.9.2 | Grouplt2sSystemGroup | current | Grouping all LT2-S system parameters. | |
| 1.3.6.1.4.1.35616.5.9.3 | Grouplt2sPortsGroup | current | Grouping all LT2-S port parameters. | |
| 1.3.6.1.4.1.35616.5.9.4 | Grouplt2sInfoGroup | current | Grouping all LT2-S info parameters. | |
| 1.3.6.1.4.1.35616.5.9.5 | Grouplt2sNotificationGroup | current | All the Traps the Lambdatrail2-S supports. |