LaserJet-Series2100-MIB
363 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | enterprises |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodehpsystem | |||
| 1.3.6.1.4.1.11.2.3.9 | Nodenet-peripheral | |||
| 1.3.6.1.4.1.11.2.3.9.4 | Nodenetdm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-only | optional | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-only | optional | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | Nodestatus-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | Scalaron-off-line | read-only | optional | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off lin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | Scalarcontinue | write-only | optional | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | Scalarauto-continue | read-write | optional | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the device will automatically gene… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | Scalarerror-log-clear | write-only | optional | Setting this object clears all the entries in the error log sub-tree. Additional information: Setting this object removes all errors that have been stored in t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | Nodeid | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | Scalarmodel-name | read-only | optional | Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming convent… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 | Scalarserial-number | read-only | optional | Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | Scalardevice-name | read-write | optional | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 | Scalardevice-location | read-write | optional | User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as muc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | Scalarasset-number | read-write | optional | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1 | Nodesimm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1 | Nodesimm1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.4 | Scalarsimm1-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnkno… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.5 | Scalarsimm1-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE obj… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2 | Nodesimm2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.4 | Scalarsimm2-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used to describe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.5 | Scalarsimm2-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3 | Nodesimm3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.4 | Scalarsimm3-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 3. See SIMM1-TYPE for a description. Additional information: This object is used to describe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.5 | Scalarsimm3-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3 | Nodemio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1 | Nodemio1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.2 | Scalarmio1-model-name | read-only | optional | Returns product information identifying the I/O card. Example: XXXX |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.3 | Scalarmio1-manufacturing-info | read-only | optional | Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 1. May include serial number and firmware revision. Additional informa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.4 | Scalarmio1-type | read-only | optional | Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the enumerations. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5 | Nodetest | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.1 | Scalarself-test | read-write | optional | Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2 | Scalarprint-internal-page | read-write | optional | Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object pr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | Nodejob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1 | Nodesettings-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.3 | Scalarjob-info-change-id | read-only | optional | Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2 | Nodeactive-print-jobs | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1 | Nodejob-being-parsed | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1 | Scalarcurrent-job-parsing-id | read-only | optional | Contains the printer assigned job identification for the job currently being processed by the processing PDL sub- system. The job ID is a monotonically increas… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5 | Nodejob-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.1 | Scalarjob-info-name1 | read-only | optional | Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: The job name is the s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.2 | Scalarjob-info-name2 | read-only | optional | Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: See job-info-name1-1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.10 | Scalarjob-info-stage | read-only | optional | Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.11 | Scalarjob-info-io-source | read-only | optional | Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.12 | Scalarjob-info-pages-processed | read-only | optional | Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.13 | Scalarjob-info-pages-printed | read-only | optional | Indicates the number of pages printed by the destination subsystem. If non of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.14 | Scalarjob-info-size | read-only | optional | Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.15 | Scalarjob-info-state | read-only | optional | Indicates the state of the job. The last OID field for this dynamic object contains the job ID. eAborted - the print job was aborted. eWaitingForResources - th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.19 | Scalarjob-info-outcome | read-only | optional | Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.20 | Scalarjob-info-outbins-used | read-only | optional | Indicates which output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.22 | Scalarjob-info-physical-outbins-used | read-only | optional | |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23 | Nodejob-info-attribute | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.1 | Scalarjob-info-attr-1 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If mor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.2 | Scalarjob-info-attr-2 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.3 | Scalarjob-info-attr-3 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.4 | Scalarjob-info-attr-4 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.5 | Scalarjob-info-attr-5 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.6 | Scalarjob-info-attr-6 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.7 | Scalarjob-info-attr-7 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.8 | Scalarjob-info-attr-8 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.9 | Scalarjob-info-attr-9 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.10 | Scalarjob-info-attr-10 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.11 | Scalarjob-info-attr-11 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.12 | Scalarjob-info-attr-12 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.13 | Scalarjob-info-attr-13 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.14 | Scalarjob-info-attr-14 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.15 | Scalarjob-info-attr-15 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.16 | Scalarjob-info-attr-16 | read-only | optional | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | Nodeerrorlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1 | Nodeerror1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 | Scalarerror1-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 | Scalarerror1-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2 | Nodeerror2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 | Scalarerror2-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 | Scalarerror2-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3 | Nodeerror3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 | Scalarerror3-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 | Scalarerror3-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4 | Nodeerror4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 | Scalarerror4-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 | Scalarerror4-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5 | Nodeerror5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 | Scalarerror5-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 | Scalarerror5-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6 | Nodeerror6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1 | Scalarerror6-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2 | Scalarerror6-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7 | Nodeerror7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1 | Scalarerror7-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2 | Scalarerror7-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8 | Nodeerror8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1 | Scalarerror8-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2 | Scalarerror8-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9 | Nodeerror9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1 | Scalarerror9-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2 | Scalarerror9-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10 | Nodeerror10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1 | Scalarerror10-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2 | Scalarerror10-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1 | Nodeio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1 | Nodesettings-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 | Scalario-timeout | read-write | optional | The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel tha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 | Scalario-switch | read-only | optional | Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.5 | Scalario-buffering | read-write | optional | Returns or controls the manner in which the device performs I/O data buffering. I/O data buffering allows additional print job data to be buffered by the I/O s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6 | Scalario-buffer-size | read-write | optional | Returns or configures the amount of memory, in bytes, dedicated to I/O print job data buffering. Attempting to set to an unsupported value causes the device to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.7 | Scalarmaximum-io-buffering-memory | read-only | optional | This object's name is misleading. Returns the maximum amount of additional memory, in bytes, that can be dedicated to buffering print job data. Additional info… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1 | Nodesettings-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | Scalardefault-copies | read-write | optional | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | Scalarform-feed | write-only | optional | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6 | Scalarresource-saving | read-write | optional | Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7 | Scalarmaximum-resource-saving-memory | read-only | optional | This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedcated to holding PDL permanent soft res… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | Scalardefault-vertical-black-resolution | read-write | optional | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In the HP LaserJet 2100 Series chan… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | Scalardefault-horizontal-black-resolution | read-write | optional | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In the HP LaserJet 2100 Series ch… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | Scalardefault-page-protect | read-write | optional | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | Scalardefault-lines-per-page | read-write | optional | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | Scalardefault-vmi | read-write | optional | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupport… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | Scalardefault-media-size | read-write | optional | This indicates the default media size. A write of an unsupported value cases an <badValue>. Complete list of supported media sizes along with their dimensions … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | Scalarcold-reset-media-size | read-write | optional | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | Scalarreprint | read-write | optional | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | Scalarwide-a4 | read-write | optional | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to allow 80 10-pitch characters t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | Scalardark-courier | read-write | optional | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJet III printer. If eOff, then t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2 | Nodestatus-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.2 | Scalarform-feed-needed | read-only | optional | Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2 | Scalarpcl-resource-saving-memory-size | read-write | optional | Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this obje… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 | Scalarpcl-default-font-height | read-write | optional | Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | Scalarpcl-default-font-source | read-write | optional | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | Scalarpcl-default-font-number | read-write | optional | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 | Scalarpcl-default-font-width | read-write | optional | Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.2 | Scalarpostscript-resource-saving-memory-size | read-write | optional | Returns or changes the amount of resource saving memory set aside to hold permanent soft PostScript resources. Additional information: The value returned by th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 | Scalarpostscript-print-errors | read-write | optional | Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5 | Nodepjl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.1 | Scalarpjl-password | read-only | optional | Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an <genErr> to occur and will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | Nodesettings-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.5 | Scalarprint-density | read-write | optional | Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1 | Nodesettings-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.5 | Scalarmp-tray | read-write | optional | Returns or changes the value of the multi-purpose (MP) tray configuration variable. The MP tray can be configured to operate as an additional input tray (eCass… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.6 | Scalartray-lock | read-write | optional | Returns or changes the list of locked input trays. The printer only pulls media from a locked input tray when the input tray is specifically requested by the p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.7 | Scalarcustom-paper-dim-unit | read-write | optional | The units of measure used to specify the width and height of the printer's custom paper. The unit of measure of eTenThousandthsOfInches is 0.0001 inches. Addit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9 | Scalarcustom-paper-xfeed-dim | read-write | optional | Sets the printer's custom paper dimension in the cross- feed direction (direction ninety degrees relative to the direction of paper feeding). The value for thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13 | Scalartray1-fuser-temperature | read-write | optional | The fuser temperature to be used when printing media from Tray 1. The value zero is the default temperature. Values less than zero are progressively lower and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | Nodeintray2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13 | Scalartray2-fuser-temperature | read-write | optional | The fuser temperature to be used when printing media from Tray 2. The value zero is the default temperature. Values less than zero are progressively lower and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3 | Nodeintray3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.13 | Scalartray3-fuser-temperature | read-write | optional | The fuser temperature to be used when printing media from Tray 3. The value zero is the default temperature. Values less than zero are progressively lower and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6 | Nodeimaging | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.5 | Scalardefault-ret | read-write | optional | Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and on should map all other values to on and always return the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.7 | Scalardefault-print-quality | read-write | optional | Returns or sets the default print quality. A value of zero has the lowest print quality. A value of 100 has the highest print quality. Each POS should document… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6 | Nodechannel | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.1 | Scalarchannelnumberofchannels | write-only | optional | An indication of how many print data channels the I/O card supports. Additional information: This object is used by the IIO card to tell the peripheral firmwar… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.2 | Scalarchannelprinteralert | read-only | optional | Identifies the values of prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup, prtAlertGroupIndex, prtAlertLocation, and prtAlertCode for the latest critical ev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3 | NodechannelTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1 | NodechannelEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.2 | Scalarchanneltype | write-only | optional | Identifies the type of MIO print data channel. Additional information: After telling the peripheral how many logical channels will be used, the IIO card tells … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.3 | Scalarchannelprotocolversion | write-only | optional | The version of the protocol used on this MIO print data channel. Additional information: After telling the peripheral how many logical channels will be used, t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.4 | Scalarchannelstate | write-only | optional | The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. Additional inform… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.5 | Scalarchannelifindex | write-only | optional | The value of ifIndex which corresponds to this channel. Additional information: After telling the peripheral how many logical channels will be used, the IIO ca… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.6 | Scalarchannelstatus | write-only | optional | Sub-unit status is reported in the entries of the principle table in the Group that represents the sub- unit. For sub-units that report a status, there is a st… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.7 | Scalarchannelinformation | write-only | optional | Auxiliary information to allow a printing application to use the channel for data submission to the printer. An application capable of using a specific PrtChan… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7 | Nodetables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2 | Nodechannel-table | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1 | Nodechannel-entry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.2 | Scalarchannel-bytes-sent | read-only | optional | The low order 31 bits of the number of bytes sent from the printer to the host on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.3 | Scalarchannel-bytes-received | read-only | optional | The low order 31 bits of the number of bytes received by the printer from the host on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.4 | Scalarchannel-io-errors | read-only | optional | The low order 31 bits of the number of I/O errors which have occured on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.5 | Scalarchannel-jobs-received | read-only | optional | The low order 31 bits of the number of print jobs which have been received on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | Nodeprintmib | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5 | NodeprtGeneral | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1 | NodeprtGeneralTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1 | NodeprtGeneralEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.1 | Scalarprtgeneralconfigchanges | read-only | optional | Counts configuration changes that change the capabilities of a printer, such as the addition/deletion of input/output bins, the addition/deletion of interprete… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.2 | Scalarprtgeneralcurrentlocalization | read-write | optional | The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identif… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.3 | Scalarprtgeneralreset | read-write | optional | Setting this value to `powerCycleReset', `resetToNVRAM', or `resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.4 | Scalarprtgeneralcurrentoperator | read-write | optional | The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5 | Scalarprtgeneralserviceperson | read-write | optional | The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6 | Scalarprtinputdefaultindex | read-only | optional | The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. This value shall be -1 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.7 | Scalarprtoutputdefaultindex | read-only | optional | The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination. This value shall be -1 i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.8 | Scalarprtmarkerdefaultindex | read-only | optional | The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker. Refer to Internet Draft Printer MIB,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.9 | Scalarprtmediapathdefaultindex | read-only | optional | The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path. Refer to Internet Draft Printer MIB, … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.10 | Scalarprtconsolelocalization | read-write | optional | The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.11 | Scalarprtconsolenumberofdisplaylines | read-only | optional | The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display Refer t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.12 | Scalarprtconsolenumberofdisplaychars | read-only | optional | The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.13 | Scalarprtconsoledisable | read-only | optional | If the object prtConsoleDisable has value 'operatorConsoleDisabled' then input is not accepted from the operator console. If the object prtConsoleDisable has t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.16 | Scalarprtgeneralprintername | read-write | optional | An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.17 | Scalarprtgeneralserialnumber | read-only | optional | A recorded serial number for this device that indexes some type device catalog or inventory. This value is usually set by the device manufacturer but the MIB s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.18 | Scalarprtalertcriticalevents | read-only | optional | A running counter of the number of critical alert events that have been recorded in the alert table. The value of this object is RESET in the event of a power … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.19 | Scalarprtalertallevents | read-only | optional | A running counter of the total number of alert event entries (critical and non-critical) that have been recorded in the alert table Refer to Internet Draft Pri… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2 | NodeprtStorageRefTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1 | NodeprtStorageRefEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1.2 | Scalarprtstoragerefindex | read-only | optional | The value of the hrDeviceIndex of the printer device that this storageEntry is associated with. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for mo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3 | NodeprtDeviceRefTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1 | NodeprtDeviceRefEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1.2 | Scalarprtdevicerefindex | read-only | optional | The value of the hrDeviceIndex of the printer device that this deviceEntry is associated with. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for mor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6 | NodeprtCover | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1 | NodeprtCoverTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1 | NodeprtCoverEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.2 | Scalarprtcoverdescription | read-only | optional | The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization. Refer to Internet Draft Printer MIB, expirin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.3 | Scalarprtcoverstatus | read-only | optional | The status of this cover sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7 | NodeprtLocalization | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1 | NodeprtLocalizationTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1 | NodeprtLocalizationEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.2 | Scalarprtlocalizationlanguage | read-only | optional | A two character language code from ISO 639. Examples en, gb, ca, fr, de. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.3 | Scalarprtlocalizationcountry | read-only | optional | A two character country code from ISO 3166, a blank string (two space characters) shall indicate that the country is not defined. Examples: US, FR, DE, ... Ref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.4 | Scalarprtlocalizationcharacterset | read-only | optional | The coded character set used for this localization. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8 | NodeprtInput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2 | NodeprtInputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1 | NodeprtInputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | Scalarprtinputtype | read-only | optional | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | Scalarprtinputdimunit | read-only | optional | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | Scalarprtinputmediadimfeeddirdeclared | read-only | optional | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | Scalarprtinputmediadimxfeeddirdeclared | read-only | optional | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-un… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | Scalarprtinputmediadimfeeddirchosen | read-only | optional | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | Scalarprtinputmediadimxfeeddirchosen | read-only | optional | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | Scalarprtinputcapacityunit | read-only | optional | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | Scalarprtinputmaxcapacity | read-only | optional | The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | Scalarprtinputcurrentlevel | read-only | optional | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the valu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | Scalarprtinputstatus | read-only | optional | The current status of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The default value… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | Scalarprtinputmedianame | read-only | optional | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | Scalarprtinputname | read-only | optional | The name assigned to this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | Scalarprtinputvendorname | read-only | optional | The vendor name of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | Scalarprtinputmodel | read-only | optional | The model name of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The HP LaserJet 2100 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | Scalarprtinputversion | read-only | optional | The version of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The HP LaserJet 2100 Ser… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | Scalarprtinputserialnumber | read-only | optional | The serial number assigned to this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The HP La… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | Scalarprtinputdescription | read-only | optional | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to Internet Draft Printer MIB, expiri… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | Scalarprtinputsecurity | read-only | optional | Indicates if this input sub-unit has some security associated with it. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9 | NodeprtOutput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2 | NodeprtOutputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1 | NodeprtOutputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.2 | Scalarprtoutputtype | read-only | optional | The type of technology supported by this output sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.3 | Scalarprtoutputcapacityunit | read-only | optional | The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 | Scalarprtoutputmaxcapacity | read-only | optional | The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.5 | Scalarprtoutputremainingcapacity | read-only | optional | The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6 | Scalarprtoutputstatus | read-only | optional | The current status of this output sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The HP LaserJet … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10 | NodeprtMarker | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2 | NodeprtMarkerTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1 | NodeprtMarkerEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.2 | Scalarprtmarkermarktech | read-only | optional | The type of marking technology used for this marking sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.3 | Scalarprtmarkercounterunit | read-only | optional | The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.4 | Scalarprtmarkerlifecount | read-only | optional | The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Refer to Internet D… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.5 | Scalarprtmarkerpoweroncount | read-only | optional | The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUni… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.6 | Scalarprtmarkerprocesscolorants | read-only | optional | The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and prtMarkerSpotColorants cannot both… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.7 | Scalarprtmarkerspotcolorants | read-only | optional | The number of spot colors supported by this marker. The value of this object and prtMarkerProcessColorants cannot both be 0. Must be 0 or greater. Refer to Int… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.8 | Scalarprtmarkeraddressabilityunit | read-only | optional | The unit of measure of distances, as applied to the marker's resolution. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.9 | Scalarprtmarkeraddressabilityfeeddir | read-only | optional | The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.10 | Scalarprtmarkeraddressabilityxfeeddir | read-only | optional | The maximum number of addressable marking positions in the cross feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.11 | Scalarprtmarkernorthmargin | read-only | optional | The margin, in units identified by prtMarkerAddressabilityUnit, from the leading edge of the medium as the medium flows through the marking engine with the sid… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.12 | Scalarprtmarkersouthmargin | read-only | optional | The margin from the South edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.13 | Scalarprtmarkerwestmargin | read-only | optional | The margin from the West edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.14 | Scalarprtmarkereastmargin | read-only | optional | The margin from the East edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.15 | Scalarprtmarkerstatus | read-only | optional | The current status of this marker sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The default valu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11 | NodeprtMarkerSupplies | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1 | NodeprtMarkerSuppliesTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1 | NodeprtMarkerSuppliesEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.2 | Scalarprtmarkersuppliesmarkerindex | read-only | optional | The value of prtMarkerIndex corresponding to the marking sub-unit with which this marker supply sub-unit is associated. Refer to Internet Draft Printer MIB, ex… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.3 | Scalarprtmarkersuppliescolorantindex | read-only | optional | The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no co… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.4 | Scalarprtmarkersuppliesclass | read-only | optional | Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled. Refer to Internet Draft Printer MIB, expiring Sept. 1… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.5 | Scalarprtmarkersuppliestype | read-only | optional | The type of this supply. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.6 | Scalarprtmarkersuppliesdescription | read-only | optional | The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization. Refer to Internet Draft Printer MIB, expiri… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.7 | Scalarprtmarkersuppliessupplyunit | read-only | optional | Unit of measure of this marker supply container/receptacle. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.8 | Scalarprtmarkersuppliesmaxcapacity | read-only | optional | The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9 | Scalarprtmarkersupplieslevel | read-only | optional | The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13 | NodeprtMediaPath | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4 | NodeprtMediaPathTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1 | NodeprtMediaPathEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.2 | Scalarprtmediapathmaxspeedprintunit | read-only | optional | The unit of measure used in specifying the speed of all media paths in the printer. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.3 | Scalarprtmediapathmediasizeunit | read-only | optional | The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer. Refer to Internet Draft Printer M… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.4 | Scalarprtmediapathmaxspeed | read-only | optional | The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. Refer to Internet Draft Printer MIB, ex… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.5 | Scalarprtmediapathmaxmediafeeddir | read-only | optional | The maximum physical media size in the feed direction of this media path expressed in units of measure specified by PrtMediaPathMediaSizeUnit. A value of (-1) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.6 | Scalarprtmediapathmaxmediaxfeeddir | read-only | optional | The maximum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.7 | Scalarprtmediapathminmediafeeddir | read-only | optional | The minimum physical media size in the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.8 | Scalarprtmediapathminmediaxfeeddir | read-only | optional | The minimum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.9 | Scalarprtmediapathtype | read-only | optional | The type of the media path for this media path. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: This object … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.10 | Scalarprtmediapathdescription | read-only | optional | The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization. Refer to Internet Draft Printer MIB, e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.11 | Scalarprtmediapathstatus | read-only | optional | The current status of this media path. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The HP LaserJet 2100 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14 | NodeprtChannel | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1 | NodeprtChannelTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1 | NodeprtChannelEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.2 | Scalarprtchanneltype | read-only | optional | The type of this print data channel. This object provides the linkage to ChannelType-specific groups that may (conceptually) extend the prtChannelTable with ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.3 | Scalarprtchannelprotocolversion | read-only | optional | The version of the protocol used on this channel. The format used for version numbering depends on prtChannelType. Refer to Internet Draft Printer MIB, expirin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.4 | Scalarprtchannelcurrentjobcntllangindex | read-only | optional | The value of prtInterpreterIndex corresponding to the Control Language Interpreter for this channel. This interpreter defines the syntax used for control funct… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.5 | Scalarprtchanneldefaultpagedesclangindex | read-write | optional | The value of prtInterpreterIndex corresponding to the Page Description Language Interpreter for this channel. This interpreter defines the default Page Descrip… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.6 | Scalarprtchannelstate | read-only | optional | The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. Refer to Internet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.7 | Scalarprtchannelifindex | read-only | optional | The value of ifIndex (in the ifTable; see the interface section of MIB-2/RFC 1213) which corresponds to this channel. When more than one row of the ifTable is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.8 | Scalarprtchannelstatus | read-only | optional | The current status of the channel. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: IIO based channels provid… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.9 | Scalarprtchannelinformation | read-only | optional | Auxiliary information to allow a printing application to use the channel for data submission to the printer. An application capable of using a specific PrtChan… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15 | NodeprtInterpreter | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1 | NodeprtInterpreterTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1 | NodeprtInterpreterEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.2 | Scalarprtinterpreterlangfamily | read-only | optional | The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. Refer to Internet Draf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.3 | Scalarprtinterpreterlanglevel | read-only | optional | The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e' for an interpreter which is emulating level… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.4 | Scalarprtinterpreterlangversion | read-only | optional | The date code or version of the language which this interpreter is interpreting or emulating. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.5 | Scalarprtinterpreterdescription | read-only | optional | A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.6 | Scalarprtinterpreterversion | read-only | optional | The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.7 | Scalarprtinterpreterdefaultorientation | read-write | optional | The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). Refer to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.8 | Scalarprtinterpreterfeedaddressability | read-only | optional | The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityFeedDir ) for this interpreter. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.9 | Scalarprtinterpreterxfeedaddressability | read-only | optional | The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityXFeedDir) for this interpr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.10 | Scalarprtinterpreterdefaultcharsetin | read-write | optional | The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the oct… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.11 | Scalarprtinterpreterdefaultcharsetout | read-only | optional | The default character set for data coming from this interpreter through the printer's output channel (i.e. the 'backchannel'). This value shall be (2) if there… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.12 | Scalarprtinterpretertwoway | read-only | optional | Indicates whether or not this interpreter returns information back to the host. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16 | NodeprtConsoleDisplayBuffer | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5 | NodeprtConsoleDisplayBufferTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1 | NodeprtConsoleDisplayBufferEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2 | Scalarprtconsoledisplaybuffertext | read-only | optional | The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to on… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17 | NodeprtConsoleLights | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6 | NodeprtConsoleLightTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1 | NodeprtConsoleLightEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.2 | Scalarprtconsoleontime | read-only | optional | This object, in conjunction with prtConsoleOffTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.3 | Scalarprtconsoleofftime | read-only | optional | This object, in conjunction with prtConsoleOnTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the la… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.4 | Scalarprtconsolecolor | read-only | optional | The color of this light. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.5 | Scalarprtconsoledescription | read-only | optional | The vendor description or label of this light in the localization specified by prtConsoleLocalization. Refer to Internet Draft Printer MIB, expiring Sept. 1997… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18 | NodeprtAlert | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1 | NodeprtAlertTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1 | NodeprtAlertEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.2 | Scalarprtalertseveritylevel | read-only | optional | The level of severity of this alert table entry. The printer determines the severity level assigned to each entry into the table. Refer to Internet Draft Print… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.3 | Scalarprtalerttraininglevel | read-only | optional | See textual convention PrtAlertTrainingLevelTC Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The value of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.4 | Scalarprtalertgroup | read-only | optional | The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of ty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.5 | Scalarprtalertgroupindex | read-only | optional | An index of the row within the principle table in the group identified by prtAlertGroup that represents the sub-unit of the printer that caused this alert. The… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.6 | Scalarprtalertlocation | read-only | optional | The sub-unit location that is defined by the printer manufacturer to further refine the location of this alert within the designated sub-unit. The location is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.7 | Scalarprtalertcode | read-only | optional | See associated textual convention PrtAlertCodeTC Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: ePohter is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.8 | Scalarprtalertdescription | read-only | optional | A description of this alert entry in the localization specified by prtGeneralCurrentLocalization. The description is provided by the printer to further elabora… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.9 | Scalarprtalerttime | read-only | optional | The value of sysUpTime at the time that this alert was generated. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional informa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3 | Nodehrm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2 | NodehrStorage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.2 | Scalarhrmemorysize | read-only | mandatory | The amount of physical main memory contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The unit of measure … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3 | NodehrStorageTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1 | NodehrStorageEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.1 | Scalarhrstorageindex | read-only | mandatory | A unique value for each logical storage area contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.2 | Scalarhrstoragetype | read-only | mandatory | The type of storage represented by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: For the HP LaserJet 2100 Series… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.3 | Scalarhrstoragedescr | read-only | mandatory | A description of the type and instance of the storage described by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.4 | Scalarhrstorageallocationunits | read-only | mandatory | The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.5 | Scalarhrstoragesize | read-only | mandatory | The size of the storage represented by this entry, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more details. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.6 | Scalarhrstorageused | read-only | mandatory | The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.7 | Scalarhrstorageallocationfailures | read-only | mandatory | The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3 | NodehrDevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2 | NodehrDeviceTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1 | NodehrDeviceEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.1 | Scalarhrdeviceindex | read-only | mandatory | A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the ne… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.2 | Scalarhrdevicetype | read-only | mandatory | An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.3 | Scalarhrdevicedescr | read-only | mandatory | A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. Refer to RFC 1514, Host Resources MI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.4 | Scalarhrdeviceid | read-only | mandatory | The product ID for this device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The complete OID reported by this object is: .… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.5 | Scalarhrdevicestatus | read-only | mandatory | The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.6 | Scalarhrdeviceerrors | read-only | mandatory | The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. Ho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5 | NodehrPrinterTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1 | NodehrPrinterEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1 | Scalarhrprinterstatus | read-only | mandatory | The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warni… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2 | Scalarhrprinterdetectederrorstate | read-only | mandatory | This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definition… |