LaserJet-Series8000-Stapler-MIB
95 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | enterprises |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodehpsystem | |||
| 1.3.6.1.4.1.11.2.3.9 | Nodenet-peripheral | |||
| 1.3.6.1.4.1.11.2.3.9.4 | Nodenetdm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6 | Nodeintray6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.1 | Scalartray6-media-size-loaded | read-only | optional | Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.12 | Scalartray6-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0 (base engine), th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4 | Nodeoutbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3 | Nodeoutbins | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3 | Nodeoutbin3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.9 | Scalaroutbin3-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.10 | Scalaroutbin3-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.11 | Scalaroutbin3-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: This object will return the the device number that cont… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4 | Nodeoutbin4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.9 | Scalaroutbin4-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.10 | Scalaroutbin4-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.11 | Scalaroutbin4-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5 | Nodeoutbin5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.9 | Scalaroutbin5-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.10 | Scalaroutbin5-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.11 | Scalaroutbin5-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6 | Nodeoutbin6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.9 | Scalaroutbin6-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.10 | Scalaroutbin6-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.11 | Scalaroutbin6-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7 | Nodeoutbin7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.9 | Scalaroutbin7-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.10 | Scalaroutbin7-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.11 | Scalaroutbin7-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8 | Nodeoutbin8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.9 | Scalaroutbin8-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.10 | Scalaroutbin8-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.11 | Scalaroutbin8-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9 | Nodeoutbin9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.9 | Scalaroutbin9-override-mode | read-write | optional | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.10 | Scalaroutbin9-maximum-binding | read-only | optional | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.11 | Scalaroutbin9-phd | read-only | optional | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.12 | Scalaroutbin9-error-info | read-only | optional | A device specific description of the last error encountered for output bin 9. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | Nodeprintmib | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8 | NodeprtInput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2 | NodeprtInputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1 | NodeprtInputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | Scalarprtinputtype | read-only | optional | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | Scalarprtinputdimunit | read-only | optional | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | Scalarprtinputmediadimfeeddirdeclared | read-write | optional | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | Scalarprtinputmediadimxfeeddirdeclared | read-write | optional | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-un… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | Scalarprtinputmediadimfeeddirchosen | read-only | optional | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | Scalarprtinputmediadimxfeeddirchosen | read-only | optional | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | Scalarprtinputcapacityunit | read-only | optional | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | Scalarprtinputmaxcapacity | read-only | optional | The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | Scalarprtinputcurrentlevel | read-only | optional | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the valu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | Scalarprtinputstatus | read-only | optional | The current status of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | Scalarprtinputmedianame | read-write | optional | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | Scalarprtinputname | read-only | optional | The name assigned to this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | Scalarprtinputvendorname | read-only | optional | The vendor name of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | Scalarprtinputmodel | read-only | optional | The model name of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | Scalarprtinputversion | read-only | optional | The version of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | Scalarprtinputserialnumber | read-only | optional | The serial number assigned to this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | Scalarprtinputdescription | read-only | optional | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/draf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | Scalarprtinputsecurity | read-only | optional | Indicates if this input sub-unit has some security associated with it. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the S… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | Scalarprtinputmedialoadtimeout | read-only | optional | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 | Scalarprtinputnextindex | read-only | optional | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeout specified by prtInputMediaL… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9 | NodeprtOutput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2 | NodeprtOutputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1 | NodeprtOutputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.2 | Scalarprtoutputtype | read-only | optional | The type of technology supported by this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Print… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.3 | Scalarprtoutputcapacityunit | read-only | optional | The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 | Scalarprtoutputmaxcapacity | read-only | optional | The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.5 | Scalarprtoutputremainingcapacity | read-only | optional | The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6 | Scalarprtoutputstatus | read-only | optional | The current status of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.7 | Scalarprtoutputname | read-write | optional | The name assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.8 | Scalarprtoutputvendorname | read-only | optional | The vendor name of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.9 | Scalarprtoutputmodel | read-only | optional | The name assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.10 | Scalarprtoutputversion | read-only | optional | The version of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.11 | Scalarprtoutputserialnumber | read-only | optional | The serial number assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.12 | Scalarprtoutputdescription | read-only | optional | A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/dra… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.13 | Scalarprtoutputsecurity | read-only | optional | Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pm… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.14 | Scalarprtoutputdimunit | read-only | optional | The unit of measurement for use in calculating and relaying dimensional values for this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.15 | Scalarprtoutputmaxdimfeeddir | read-only | optional | The maximum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.16 | Scalarprtoutputmaxdimxfeeddir | read-only | optional | The maximum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.17 | Scalarprtoutputmindimfeeddir | read-only | optional | The minimum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 | Scalarprtoutputmindimxfeeddir | read-only | optional | The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.19 | Scalarprtoutputstackingorder | read-only | optional | The current state of the stacking order for the associated output sub-unit. `FirstToLast' means that as pages are output the front of the next page is placed a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.20 | Scalarprtoutputpagedeliveryorientation | read-only | optional | The reading surface that will be `up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of thes… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.21 | Scalarprtoutputbursting | read-only | optional | This object indicates that the outputting sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous me… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.22 | Scalarprtoutputdecollating | read-only | optional | This object indicates that the output supports supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.23 | Scalarprtoutputpagecollated | read-only | optional | This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled. See glossary for definition of how this docu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.24 | Scalarprtoutputoffsetstacking | read-only | optional | This object indicates that the output supports supports offset stacking, and if so, whether the feature is enabled. See glossary for how Offset Stacking is def… |