LaserJet4V-MIB
184 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | enterprises |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodehpsystem | |||
| 1.3.6.1.4.1.11.2.3.9 | Nodenet-peripheral | |||
| 1.3.6.1.4.1.11.2.3.9.4 | Nodenetdm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-write | optional | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-write | optional | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.8 | Scalarcontrol-panel-lock | read-write | optional | Device control panel lock. A value of eDisabled means the control panel is unlocked and the device's configuration can be modified from the control panel. A va… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | Nodestatus-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | Scalarlocalization-language | read-only | optional | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of the printer generated printed p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | Scalarnot-ready-printer | read-only | mandatory | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perform its function until some sort… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3 | Scalarnot-ready-controller | read-only | optional | Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the hardware c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | Scalarnot-idle | read-only | optional | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unprocessed PDL data in the device… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | Scalaron-off-line | read-write | optional | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off lin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | Scalarcontinue | write-only | optional | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | Scalarauto-continue | read-write | optional | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the device will automatically gene… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.12 | Scalaruser-nvram-reset | write-only | optional | Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus loosing print job data. The PO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | Nodedisplay | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1 | Nodedisplay-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.1 | Scalardisplay-column-size | read-only | optional | Indicates the number of characters displayable on each row of the printer's display. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.2 | Scalardisplay-number-of-rows | read-only | optional | Indicates the number of rows displayable on the printer's display. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.2 | Nodestatus-message | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.2.1 | Nodestatus-message1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.2.1.1 | Scalarstatus-msg-line1-part1 | read-only | optional | First part of the first line of the printer's status message. Additional information: In the Offline state, device only returns 00 OFFLINE and not the actual c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | Scalartotal-ram-size | read-only | optional | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | Scalarstatus-printer | read-only | mandatory | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useable, but not at its highest state… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | Scalarstatus-controller | read-only | optional | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | Nodeid | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 | Scalarmodel-number | read-only | optional | Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products sho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | Scalarmodel-name | read-only | mandatory | Identifies the device model name (e.g. ``DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming convent… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 | Scalarserial-number | read-only | optional | Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 | Scalarfw-rom-datecode | read-only | optional | Identifies the base system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versions of the base system firmware.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | Scalardevice-name | read-write | optional | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 | Scalardevice-location | read-write | optional | User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as muc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | Scalarasset-number | read-write | optional | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.13 | Scalarsystem-contact | read-write | optional | User defined string containing the name of the person or group that is responsible for the device. The POS should indicate the maximum supported string length.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1 | Nodesimm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1 | Nodesimm1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.4 | Scalarsimm1-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnkno… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.5 | Scalarsimm1-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE obj… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2 | Nodesimm2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.4 | Scalarsimm2-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.5 | Scalarsimm2-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3 | Nodesimm3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.4 | Scalarsimm3-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 3. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.5 | Scalarsimm3-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4 | Nodesimm4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4.4 | Scalarsimm4-type | read-only | optional | Returns an indication of the type of option installed in SIMM slot 4. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4.5 | Scalarsimm4-capacity | read-only | optional | Returns an indication of the capacity of the SIMM installed in SIMM slot 4. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2 | Nodeat | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1 | Nodeat1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.1 | Scalarat1-model-number | read-only | optional | Identifies the AT model number. If the disk was manufactured by HP, then the model number is the one listed in the HP corporate price list. If possible, encode… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.2 | Scalarat1-model-name | read-only | optional | Returns product information identifying the AT storage device. Example: C3014A Additional information: The product information is obtained from the disk using … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.3 | Scalarat1-manufacturing-info | read-only | optional | Returns information describing the manufacture of this particular AT. May include serial number and firmware revision. Additional information: Returns the mode… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.4 | Scalarat1-type | read-only | optional | Returns an indication of the type of option installed in this particular AT interface. See SIMM1-TYPE for an explanation of the enumerations. Additional inform… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.5 | Scalarat1-capacity | read-only | optional | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5 | Nodetest | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.1 | Scalarself-test | read-write | optional | Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2 | Scalarprint-internal-page | read-write | optional | Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object pr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | Nodejob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1 | Nodesettings-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.1 | Scalarclearable-warning | read-only | optional | Returns or controls how the device will track clearable warnings. A clearable warning indicates a transient event in the device. The device will continue after… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10 | Nodefile-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3 | Nodefile-systems | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1 | Nodefile-system1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.1 | Scalarfile-system1-initialized | read-only | optional | Returns eTrue if a file system has been written to the mass storage device(s) which will hold file data contained in this file system. Returns eFalse otherwise… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.2 | Scalarfile-system1-capacity | read-only | optional | Returns the total size, in bytes, of the mass storage space configured to hold the file data (and file system information) assoicated with files stored in this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.3 | Scalarfile-system1-free-space | read-only | optional | Returns the total amount, in bytes, of unused storage space currently available to this file system. Additional information: This objects is only supported if … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.4 | Scalarfile-system1-write-protect | read-write | optional | Supports write-protecting the file system. Setting FILE-SYSTEM-WRITE-PROTECT to eEnabled blocks any modification of the contents of the file system. Setting FI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | Nodeerrorlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1 | Nodeerror1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 | Scalarerror1-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 | Scalarerror1-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2 | Nodeerror2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 | Scalarerror2-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 | Scalarerror2-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3 | Nodeerror3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 | Scalarerror3-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 | Scalarerror3-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4 | Nodeerror4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 | Scalarerror4-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 | Scalarerror4-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5 | Nodeerror5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 | Scalarerror5-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 | Scalarerror5-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1 | Nodeio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1 | Nodesettings-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 | Scalario-timeout | read-write | optional | The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel tha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 | Scalario-switch | read-only | optional | Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.5 | Scalario-buffering | read-only | optional | Returns or controls the manner in which the device performs I/O data buffering. I/O data buffering allows additional print job data to be buffered by the I/O s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6 | Scalario-buffer-size | read-only | optional | Returns or configures the amount of memory, in bytes, dedicated to I/O print job data buffering. Attempting to set to an unsupported value causes the device to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.7 | Scalarmaximum-io-buffering-memory | read-only | optional | Returns the maximum amount of additional memory, in bytes, that can be dedicated to buffering print job data. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.2 | Nodestatus-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.2.1 | Scalarnot-ready-source-io | read-only | optional | Indicates if the I/O sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the I/O sub-system is ready. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.2.2 | Scalarstatus-source-io | read-only | optional | Indicates if the I/O sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3 | Nodeport1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1 | Nodeparallel | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.4 | Scalarparallel-speed | read-write | optional | Returns or changes the maximum parallel I/O port speed. An eSlow setting causes a 10 us busy pulse per received byte of data. An eFast setting causes a 1.5 us … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.5 | Scalarparallel-bidirectionality | read-write | optional | Returns or changes whether the parallel I/O port supports bidirectional communication. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1 | Nodesettings-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.2 | Scalardefault-orientation | read-write | optional | Returns or changes the default orientation. The list of supported values should be documented in the device POS. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | Scalardefault-copies | read-write | optional | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | Scalarform-feed | write-only | optional | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6 | Scalarresource-saving | read-only | optional | Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7 | Scalarmaximum-resource-saving-memory | read-only | optional | Returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft resources. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | Scalardefault-vertical-black-resolution | read-write | optional | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In LaserJet 4V changing this OID al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | Scalardefault-horizontal-black-resolution | read-write | optional | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In LaserJet 4V changing this OID … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | Scalardefault-page-protect | read-write | optional | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | Scalardefault-lines-per-page | read-write | optional | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | Scalardefault-media-size | read-write | optional | This indicates the default media size. A write of an unsupported value cases an <badValue>. Complete list of supported media sizes along with their dimensions … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2 | Nodestatus-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.1 | Scalarnot-ready-processing-pdl | read-only | optional | Indicates if the PDL sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the PDL sub-system is ready. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.2 | Scalarform-feed-needed | read-only | optional | Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.1 | Scalarpcl-datecode | read-only | optional | This indicates the PCL firmware date code in yyyymmdd format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2 | Scalarpcl-resource-saving-memory-size | read-only | optional | Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: Returns the amount of memory, i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.3 | Scalarpcl-name | read-only | optional | Contains the name of the PDL. For PCL, the name is `PCL'. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.4 | Scalarpcl-version | read-only | optional | Contains the PDL version. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.11 | Scalarpcl-default-symbol-set | read-write | optional | Returns or changes the default PCL symbol set. The enumeration values match the values supported by the PCL Symbol Set Code escape sequence, <ESC>*c#R. The bin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 | Scalarpcl-default-font-height | read-write | optional | Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | Scalarpcl-default-font-source | read-write | optional | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | Scalarpcl-default-font-number | read-write | optional | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 | Scalarpcl-default-font-width | read-write | optional | Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.1 | Scalarpostscript-datecode | read-only | optional | This indicates the PostScript firmware datecode in yyyymmdd format. Additional information: This object is only supported if PostScript option is installed. Re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.2 | Scalarpostscript-resource-saving-memory-size | read-only | optional | Returns or changes the amount of resource saving memory set aside to hold permanent soft PostScript resources. Additional information: Returns the amount of me… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.3 | Scalarpostscript-name | read-only | optional | Contains the name of the PDL. For PostScript, the name is `PostScript'. Additional information: This object is only supported if PostScript option is installed… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.4 | Scalarpostscript-version | read-only | optional | Contains the PDL version. Additional information: This object is only supported if PostScript option is installed. Returns <noSuchName> status if attempting to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 | Scalarpostscript-print-errors | read-write | optional | Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.12 | Scalarpostscript-jam-recovery | read-write | optional | Returns or changes the PostScript jam recovery setting. If eOn, then the device will reprint PostScript pages, if those pages jam. Additional information: This… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5 | Nodepdl-esc-p | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5.1 | Scalaresc-p-datecode | read-only | optional | This indicates the ESC-P PDL datecode. The datecode format is yyyymmdd. Additional information: This object is only supported if ESC-P option is installed. Ret… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5.3 | Scalaresc-p-name | read-only | optional | Contains the name of the PDL. For ESC-P, the name is `ESC-P'. Additional information: This object is only supported if ESC-P option is installed. Returns an <n… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5.4 | Scalaresc-p-version | read-only | optional | Contains the PDL version. Additional information: This object is only supported if ESC-P option is installed. Returns an <noSuchName> status if attempting to p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5 | Nodepjl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.1 | Scalarpjl-password | read-only | optional | Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an <genErr> to occur and will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2 | Nodestatus-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.1 | Scalarnot-ready-destination-print-engine | read-only | optional | Indicates if the print engine sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the print engine sub-… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.3 | Scalarnot-ready-laser-print-engine | read-only | optional | Indicates if the laser print engine sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the laser print… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5 | Scalartotal-engine-page-count | read-only | optional | Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supported value before the page cou… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.8 | Scalarstatus-destination-print-engine | read-only | optional | Indicates if part of the print engine sub-system is not functional, but the non-functional component(s) are not currently required to print. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1 | Nodesettings-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.4 | Scalardefault-manual-feed | read-write | optional | Returns or changes the default manual feed value used by the PDLs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.5 | Scalarmp-tray | read-only | optional | Returns or changes the value of the multi-purpose (MP) tray configuration variable. The MP tray can be configured to operate as an additional input tray (eCass… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.6 | Scalartray-lock | read-only | optional | Returns or changes the list of locked input trays. The printer only pulls media from a locked input tray when the input tray is specifically requested by the p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2 | Nodestatus-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.1 | Scalarnot-ready-tray-missing | read-only | optional | Indicates which trays are not currently installed that is caused the device to be not ready. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.2 | Scalarnot-ready-tray-empty | read-only | optional | Indicates which trays contain no media causing the device to be not ready. Some devices may treat tray missing as a tray empty condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.3 | Scalarstatus-tray-missing | read-only | optional | Indicates which trays are not currently installed that is caused the device to be in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.4 | Scalarstatus-tray-empty | read-only | optional | Indicates which trays contain no media causing the device to be in a warning condition. Some devices may treat tray missing as a tray empty condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 | Scalartray1-media-size-loaded | read-only | optional | Returns the media size that is currently loaded in tray #1. This object can be set to indicate the media size currently loaded, if the printer supports input t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.2 | Scalartray1-media-available | read-only | optional | Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.3 | Scalartray1-name | read-only | optional | Returns the device specific name for tray 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | Nodeintray2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.1 | Scalartray2-media-size-loaded | read-only | optional | Returns the media size that is currently loaded in tray #2. Complete list of supported media sizes along with their dimensions are listed in the ``Media Size T… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.2 | Scalartray2-media-available | read-only | optional | Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.3 | Scalartray2-name | read-only | optional | Returns the device specific name for tray 2. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3 | Nodeintray3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.1 | Scalartray3-media-size-loaded | read-only | optional | Returns the media size that is currently loaded in tray #3. Complete list of supported media sizes along with their dimensions are listed in the ``Media Size T… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.2 | Scalartray3-media-available | read-only | optional | Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.3 | Scalartray3-name | read-only | optional | Returns the device specific name for tray 3. Additional information: This object is only supported if a LC is installed. Returns <noSuchName> status if attempt… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4 | Nodeoutbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3 | Nodeoutbins | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1 | Nodeoutbin1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.1 | Scalaroutbin1-maximum-capacity | read-only | optional | Maximum capacity of the output bin, in sheets of 20 pound paper. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5 | Nodemarking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1 | Nodesettings-marking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1.3 | Scalarlow-marking-agent-processing | read-write | optional | Returns or changes how the device processes a low marking agent event. If eCont, then the device continues to print. If eStop, then the device stops until a co… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6 | Nodeimaging | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.5 | Scalardefault-ret | read-write | optional | Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and on should map all other values to on and always return the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.7 | Scalardefault-print-quality | read-write | optional | Returns or sets the default print quality. A value of zero has the lowest print quality. A value of 100 has the highest print quality. Each POS should document… |