MADGEBOX-MIB
70 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.494 | Nodemadge | |||
| 1.3.6.1.4.1.494.10 | NodemadgeBox | |||
| 1.3.6.1.4.1.494.10.1 | NodemadgeConfig | |||
| 1.3.6.1.4.1.494.10.1.1 | ScalarmadgeConfigIPAddress | read-write | mandatory | The IP address of the device. |
| 1.3.6.1.4.1.494.10.1.2 | ScalarmadgeConfigIPGateway | read-write | mandatory | The default IP gateway for the device. |
| 1.3.6.1.4.1.494.10.1.3 | ScalarmadgeConfigIPSubnetMask | read-write | mandatory | The IP subnet mask of the device. |
| 1.3.6.1.4.1.494.10.1.4 | ScalarmadgeConfigSerialNumber | read-only | mandatory | The burnt-in identifier of the device. This is a unique number and in most cases maps directly to the base MAC address of the device |
| 1.3.6.1.4.1.494.10.1.5 | ScalarmadgeConfigMCodeVersion | read-only | mandatory | Microcode version of the device. Stored in the format :- first Byte - not used - microcode major version number - microcode minor version number last Byte - mi… |
| 1.3.6.1.4.1.494.10.1.6 | ScalarmadgeConfigBCodeVersion | read-only | mandatory | Bootcode version of the device and the hardware version. Stored in the format :- High Byte - hardware version number - bootcode major version number - bootcode… |
| 1.3.6.1.4.1.494.10.1.7 | ScalarmadgeConfigMCodeFilename | read-only | mandatory | Original filename for the microcode that has been downloaded to the device. |
| 1.3.6.1.4.1.494.10.1.8 | ScalarmadgeConfigDeviceHealth | read-only | mandatory | Current health of the device Normal - everything is fine warning - something the user should be aware of degraded - the box is operating at reduced functionali… |
| 1.3.6.1.4.1.494.10.1.9 | ScalarmadgeConfigAdminStatus | read-write | mandatory | The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value … |
| 1.3.6.1.4.1.494.10.1.10 | ScalarmadgeConfigPassword | read-write | mandatory | The case insensitive password for the device. Any GET operation on this object will return PUBLIC. If an attempt is made to set the password to a string greate… |
| 1.3.6.1.4.1.494.10.1.11 | ScalarmadgeConfigLinkTest | read-write | mandatory | An object that can be written with any value to test whether a management station knows the correct device password |
| 1.3.6.1.4.1.494.10.1.12 | ScalarmadgeConfigOperStatus | read-only | mandatory | The current operating mode of the device. normal - standard operating mode reboot - the device is rebooting identify - the device is identifying itself test - … |
| 1.3.6.1.4.1.494.10.1.13 | ScalarmadgeConfigEraseFlashVersion | read-write | mandatory | A valid version index for the bank of flash to erase when AdminStatus is set to erase-flash. NOTE:This variable is only available on devices that support versi… |
| 1.3.6.1.4.1.494.10.1.14 | ScalarmadgeConfigDefaultFlashVersion | read-write | mandatory | The version index of the default flash bank that a device will reboot into when a standard reboot is performed. NOTE:This variable is only available on devices… |
| 1.3.6.1.4.1.494.10.2 | NodemadgeSecure | |||
| 1.3.6.1.4.1.494.10.2.1 | ScalarmadgeSecureCurrentTableSize | read-only | mandatory | The size of the current users table in the device. A size of zero indicates that the table is not supported. |
| 1.3.6.1.4.1.494.10.2.2 | ScalarmadgeSecureCurrentTimeout | read-write | mandatory | A time in seconds used to specify how long a management station will remain registered in the Current Users table if no requests are received from that managem… |
| 1.3.6.1.4.1.494.10.2.3 | TablemadgeSecureCurrentTable | not-accessible | mandatory | A table containing an address for all managers that are currently communicating with this device |
| 1.3.6.1.4.1.494.10.2.3.1 | RowmadgeSecureCurrentEntry | not-accessible | mandatory | A entry containing an address for a manager that is currently communicating with this device |
| 1.3.6.1.4.1.494.10.2.3.1.1 | ColumnmadgeSecureCurrentIndex | read-only | mandatory | Index into the table |
| 1.3.6.1.4.1.494.10.2.3.1.2 | ColumnmadgeSecureCurrentType | read-only | mandatory | Identifies the format of the data stored in madgeSecureCurrentAddress not-used - this table entry does not contain valid data ip-address - this table entry con… |
| 1.3.6.1.4.1.494.10.2.3.1.3 | ColumnmadgeSecureCurrentAddress | read-only | mandatory | An address of a management station that is currently communicating with this device. The format of the address is determined by the associated entry in the mad… |
| 1.3.6.1.4.1.494.10.2.3.1.4 | ColumnmadgeSecureCurrentUpdateTime | read-only | mandatory | The time in seconds since the management station identified by this table entry last accessed this device. The table entry will be removed by the device once t… |
| 1.3.6.1.4.1.494.10.2.3.1.5 | ColumnmadgeSecureCurrentIPAddress | read-only | mandatory | If madgeSecureCurrentType is set to ip-address, this variable returns the madgeSecureCurrentAddress encoded as an IP Address, rather than an Octet String |
| 1.3.6.1.4.1.494.10.2.4 | ScalarmadgeSecureAllowedEnabled | read-write | mandatory | Enable / disable the allowed users feature. enabled - only management stations with an address in the AllowedTable will be allowed to get / set MIB variables i… |
| 1.3.6.1.4.1.494.10.2.5 | ScalarmadgeSecureAllowedTableSize | read-only | mandatory | The size of the allowed users table in the device. A size of zero indicates that the table is not supported. |
| 1.3.6.1.4.1.494.10.2.6 | TablemadgeSecureAllowedTable | not-accessible | mandatory | A table containing an address for all managers that are allowed to get / set MIB variables in this device |
| 1.3.6.1.4.1.494.10.2.6.1 | RowmadgeSecureAllowedEntry | not-accessible | mandatory | An entry containing an address for a manager that is allowed to get / set MIB variables in this device |
| 1.3.6.1.4.1.494.10.2.6.1.1 | ColumnmadgeSecureAllowedIndex | read-only | mandatory | Index into the table |
| 1.3.6.1.4.1.494.10.2.6.1.2 | ColumnmadgeSecureAllowedType | read-write | mandatory | Identifies the format of the data stored in madgeSecureAllowedAddress not-used - this table entry does not contain valid data ip-address - this table entry con… |
| 1.3.6.1.4.1.494.10.2.6.1.3 | ColumnmadgeSecureAllowedAddress | read-write | mandatory | An address of a management station that is allowed to get / set MIB variables in this device The format of the address is determined by the associated entry in… |
| 1.3.6.1.4.1.494.10.2.6.1.4 | ColumnmadgeSecureAllowedIPAddress | read-write | mandatory | If madgeSecureAllowedType is set to ip-address, this variable is equivalent to madgeSecureAllowedAddress encoded as an IP Address, rather than an Octet String |
| 1.3.6.1.4.1.494.10.2.7 | ScalarmadgeSecureTrapDestEnabled | read-write | mandatory | Enable / disable the trap destination feature. enabled - any SNMP traps generated by this device will only be sent to management stations with an address in th… |
| 1.3.6.1.4.1.494.10.2.8 | ScalarmadgeSecureTrapDestTableSize | read-only | mandatory | The size of the trap destinations table in the device. A size of zero indicates that this table is not supported. |
| 1.3.6.1.4.1.494.10.2.9 | TablemadgeSecureTrapDestTable | not-accessible | mandatory | A table containing the address for all managers that are to receive SNMP traps generated by this device |
| 1.3.6.1.4.1.494.10.2.9.1 | RowmadgeSecureTrapDestEntry | not-accessible | mandatory | An entry containing the address for a manager that is to receive SNMP traps generated by this device |
| 1.3.6.1.4.1.494.10.2.9.1.1 | ColumnmadgeSecureTrapDestIndex | read-only | mandatory | Index into the table |
| 1.3.6.1.4.1.494.10.2.9.1.2 | ColumnmadgeSecureTrapDestType | read-write | mandatory | Identifies the format of the data stored in madgeSecureTrapDestAddress not-used - this table entry does not contain valid data ip-address - this table entry co… |
| 1.3.6.1.4.1.494.10.2.9.1.3 | ColumnmadgeSecureTrapDestAddress | read-write | mandatory | An address for a management station that is to receive any SNMP traps generated by this device. The format of the address is determined by the associated entry… |
| 1.3.6.1.4.1.494.10.2.9.1.4 | ColumnmadgeSecureTrapDestIPAddress | read-write | mandatory | If madgeSecureTrapDestType is set to ip-address, this variable is equivalent to madgeSecureTrapDestAddress encoded as an IP Address, rather than an Octet String |
| 1.3.6.1.4.1.494.10.3 | NodemadgeDownload | |||
| 1.3.6.1.4.1.494.10.3.1 | ScalarmadgeDownloadIPAddress | read-write | mandatory | The IP address of the server to use for the download when using TFTP-IP |
| 1.3.6.1.4.1.494.10.3.2 | ScalarmadgeDownloadIPGateway | read-write | mandatory | The IP gateway to be used to access the server. If this variable is zero then use the default gateway in madgeConfigIPGateway. |
| 1.3.6.1.4.1.494.10.3.3 | ScalarmadgeDownloadIPXAddress | read-write | mandatory | The IPX address of the server to use for the download when using TFTP-IPX or RPL-IPX |
| 1.3.6.1.4.1.494.10.3.4 | ScalarmadgeDownloadNodeAddress | read-write | mandatory | The Node address of the server to use for the download when using RPL-LLC |
| 1.3.6.1.4.1.494.10.3.5 | ScalarmadgeDownloadFileName | read-write | mandatory | The filename of the microcode to download. The maximum length of this string is device specific. If a string that is too long is written to this variable BAD V… |
| 1.3.6.1.4.1.494.10.3.6 | ScalarmadgeDownloadDestination | read-write | mandatory | The destination for the download. This will contain the madgeVersionIndex for the download destination. |
| 1.3.6.1.4.1.494.10.3.7 | ScalarmadgeDownloadState | read-only | mandatory | The current state of the download |
| 1.3.6.1.4.1.494.10.3.8 | ScalarmadgeDownloadFailureCode | read-only | mandatory | While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is an… |
| 1.3.6.1.4.1.494.10.3.9 | ScalarmadgeDownloadStatusText | read-only | mandatory | A display string describing the status of the download in progress, or the reason for failure of the last download. If FailureCode = no-error then StatusText m… |
| 1.3.6.1.4.1.494.10.3.10 | ScalarmadgeDownloadSize | read-only | mandatory | While a download is in progress this indicates the number of bytes transferred so far. After the download is completed this remains at the final size downloade… |
| 1.3.6.1.4.1.494.10.4 | NodemadgeIP | |||
| 1.3.6.1.4.1.494.10.4.1 | ScalarmadgeIPCurrentAddress | read-only | mandatory | The IP address that is currently being used by this device. The IP address could have been obtained from madgeConfigIPAddress or by some other means indicated … |
| 1.3.6.1.4.1.494.10.4.2 | ScalarmadgeIPCurrentGateway | read-only | mandatory | The IP gateway that is currently being used by this device. The IP gateway could have been obtained from madgeConfigIPGateway or by some other means indicated … |
| 1.3.6.1.4.1.494.10.4.3 | ScalarmadgeIPCurrentSubnetMask | read-only | mandatory | The IP Subnet Mask that is currently being used by this device. The IP Subnet Mask could have been obtained from madgeConfigIPSubnetMask or by some other means… |
| 1.3.6.1.4.1.494.10.4.4 | ScalarmadgeIPDiscoveryMethod | read-only | mandatory | The source of the currently used IP address, gateway and subnet mask. |
| 1.3.6.1.4.1.494.10.4.5 | ScalarmadgeIPBootpEnabled | read-write | mandatory | Enable / Disable the use of BootP for IP address discovery |
| 1.3.6.1.4.1.494.10.4.6 | ScalarmadgeIPRarpEnabled | read-write | mandatory | Enable / Disable the use of Rarp for IP address discovery |
| 1.3.6.1.4.1.494.10.5 | NodemadgeVersion | |||
| 1.3.6.1.4.1.494.10.5.1 | TablemadgeVersionTable | not-accessible | mandatory | A table containing version information for all hardware / software components in a device. |
| 1.3.6.1.4.1.494.10.5.1.1 | RowmadgeVersionEntry | not-accessible | mandatory | An entry containing version information for a hardware / software component in a device. |
| 1.3.6.1.4.1.494.10.5.1.1.1 | ColumnmadgeVersionIndex | not-accessible | mandatory | Index into the table |
| 1.3.6.1.4.1.494.10.5.1.1.2 | ColumnmadgeVersionDescription | read-only | mandatory | A string containing a textual description for the component identified by this entry. |
| 1.3.6.1.4.1.494.10.5.1.1.3 | ColumnmadgeVersionLocation | read-only | mandatory | A string containing a textual description of the location of the component identified by this entry. eg Flash Bank A Flash ROM Boot ROM Boot Bank A Base Hardwa… |
| 1.3.6.1.4.1.494.10.5.1.1.4 | ColumnmadgeVersionNumber | read-only | mandatory | Version number for the component. Stored in the format :- first Byte - major version number - minor version number last Byte - debug version number. |
| 1.3.6.1.4.1.494.10.5.1.1.5 | ColumnmadgeVersionType | read-only | mandatory | The type of object that this table entry contains version information for. |
| 1.3.6.1.4.1.494.10.5.2 | ScalarmadgeVersionCount | read-only | mandatory | The number of entries in the version table |