MADGERSW-MIB
61 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.494 | Nodemadge | |||
| 1.3.6.1.4.1.494.4 | Noderingswitch | |||
| 1.3.6.1.4.1.494.4.1 | NodefanPSSpeedFailed | This trap is sent when the Power Supply fan has failed. | ||
| 1.3.6.1.4.1.494.4.1 | NoderingswitchBase | |||
| 1.3.6.1.4.1.494.4.1.1 | ScalarringswitchBasePSFanSpeed | read-only | mandatory | The number of revolutions per minute being reported by the fan internal to the system power supply. If this value is read as zero, the fan is no longer operati… |
| 1.3.6.1.4.1.494.4.1.2 | ScalarringswitchBaseExtFanSpeed | read-only | mandatory | The number of revolutions per minute being reported by the external system fan. If this value is read as zero, the fan is no longer operating |
| 1.3.6.1.4.1.494.4.1.3 | ScalarringswitchBaseRipSapSuppression | read-write | mandatory | If this variable is set to enable the system will only forward broadcast-addressed IPX RIP and SAP Response frames to those ports that have recently sourced su… |
| 1.3.6.1.4.1.494.4.1.4 | ScalarringswitchBaseAREConversion | read-write | mandatory | This variable controls the action taken when forwarding All Routes Explorer frames. enable-first: convert all ARE frames with a RIF length of 2 to STE frames. … |
| 1.3.6.1.4.1.494.4.2 | NodefanExtSpeedFailed | This trap is sent when the external fan has failed. | ||
| 1.3.6.1.4.1.494.4.2 | NoderingswitchPort | |||
| 1.3.6.1.4.1.494.4.2.1 | TableringswitchPortTable | not-accessible | mandatory | A table that contains general port information. |
| 1.3.6.1.4.1.494.4.2.1.1 | RowringswitchPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.494.4.2.1.1.1 | ColumnringswitchPortNum | read-only | mandatory | The port number of the port for which this entry contains Ringswitch management information. |
| 1.3.6.1.4.1.494.4.2.1.1.2 | ColumnringswitchPortRingStatus | read-only | mandatory | The status of the ring to which this port is connected. |
| 1.3.6.1.4.1.494.4.2.1.1.3 | ColumnringswitchPortAdapterStatus | read-only | mandatory | The status of the adapter used by this port. |
| 1.3.6.1.4.1.494.4.2.1.1.4 | ColumnringswitchPortMediaType | read-only | mandatory | Media type of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.5 | ColumnringswitchPortIfMode | read-write | mandatory | Node or concentrator status of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.6 | ColumnringswitchPortRingSpeed | read-write | mandatory | Speed of the ring to which this port is connected. |
| 1.3.6.1.4.1.494.4.2.1.1.7 | ColumnringswitchPortTestState | read-only | mandatory | Current state of the bridge test. |
| 1.3.6.1.4.1.494.4.2.1.1.8 | ColumnringswitchPortTestError | read-only | mandatory | Result of the bridge test. |
| 1.3.6.1.4.1.494.4.2.1.1.9 | ColumnringswitchPortTestPhase | read-only | mandatory | Current phase of the bridge test. |
| 1.3.6.1.4.1.494.4.2.1.1.10 | ColumnringswitchPortSummary | read-only | mandatory | This is a three octet field which packs some of the port attributes into a single mib entry. Each nibble represents a different attribute of the port: ifAdminS… |
| 1.3.6.1.4.1.494.4.2.1.1.11 | ColumnringswitchPortAddress | read-only | mandatory | The hard wired address of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.12 | ColumnringswitchPortLAA | read-write | mandatory | The locally administered address of the port. |
| 1.3.6.1.4.1.494.4.2.1.1.13 | ColumnringswitchPortStationType | read-write | mandatory | Workstations-only status of the port; if this is limited, the port only has workstations on it, and broadcast frames received on this port will not be transmit… |
| 1.3.6.1.4.1.494.4.2.1.1.14 | ColumnringswitchPortRPSEnable | read-write | mandatory | Enables or disables the Ring Parameter Server function on the port. If this variable is set to enabled, the port will enable the RPS functional address, and re… |
| 1.3.6.1.4.1.494.4.2.1.1.15 | ColumnringswitchPortCutThruEnable | read-write | mandatory | Enables or disables cut-through switching on the port. In some circumstances (e.g., 4 to 16 MB switching), cut-through will always be disabled, irrespective of… |
| 1.3.6.1.4.1.494.4.2.1.1.16 | ColumnringswitchPortInOctets | read-only | mandatory | 48 bit version of the interface MIB counter ifInOctets. |
| 1.3.6.1.4.1.494.4.2.1.1.17 | ColumnringswitchPortOutOctets | read-only | mandatory | 48 bit version of the interface MIB counter ifOutOctets. |
| 1.3.6.1.4.1.494.4.2.1.1.18 | ColumnringswitchPortSpecInFrames | read-only | mandatory | 48 bit version of the Bridge MIB counter srPortSpecInFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.19 | ColumnringswitchPortSpecOutFrames | read-only | mandatory | 48 bit version of the Bridge MIB counter srPortSpecOutFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.20 | ColumnringswitchPortApeInFrames | read-only | mandatory | 48 bit version of the Bridge MIB counter srPortApeInFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.21 | ColumnringswitchPortApeOutFrames | read-only | mandatory | 48 bit version of the Bridge MIB counter srPortApeOutFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.22 | ColumnringswitchPortSteInFrames | read-only | mandatory | 48 bit version of the Bridge MIB counter srPortSteInFrames. |
| 1.3.6.1.4.1.494.4.2.1.1.23 | ColumnringswitchPortSteOutFrames | read-only | mandatory | 48 bit version of the Bridge MIB counter srPortSteOutFrames. |
| 1.3.6.1.4.1.494.4.3 | NodeportFailed | This trap is sent when a port has auto-closed or failed to open. | ||
| 1.3.6.1.4.1.494.4.3 | NoderingswitchSR | |||
| 1.3.6.1.4.1.494.4.3.1 | ScalarringswitchSRAdminState | read-write | mandatory | The desired state of source routing; allows source routing to be enabled or disabled for the whole Ringswitch |
| 1.3.6.1.4.1.494.4.3.2 | ScalarringswitchSROperState | read-only | mandatory | The actual state of source routing. If ringswitchSRAdminState is 'disabled' then this state will be inactive. If ringswitchSRAdminState is 'enabled' then this … |
| 1.3.6.1.4.1.494.4.4 | NodebrTestFailed | This trap is sent when the bridge test on a port fails. | ||
| 1.3.6.1.4.1.494.4.4 | NoderingswitchLCD | |||
| 1.3.6.1.4.1.494.4.4.1 | ScalarringswitchLCDTotalDisplays | read-only | mandatory | The total number of displays on the Ringswitch. |
| 1.3.6.1.4.1.494.4.4.2 | ScalarringswitchLCDCurrentDisplay | read-write | mandatory | The number of the display that the Ringswitch is currently showing. |
| 1.3.6.1.4.1.494.4.4.3 | ScalarringswitchLCDCurrentMsgText | read-only | mandatory | The actual lcd message text, including a carriage return after the first line, and a null character after the second line. |
| 1.3.6.1.4.1.494.4.4.4 | TableringswitchLCDTable | not-accessible | mandatory | A table that contains all of the lcd messages that could be displayed by the Ringswitch if the user were to flick the paddle switch. |
| 1.3.6.1.4.1.494.4.4.4.1 | RowringswitchLCDTableEntry | not-accessible | mandatory | Arguments and message number details for each LCD entry. |
| 1.3.6.1.4.1.494.4.4.4.1.1 | ColumnringswitchLCDNum | read-only | mandatory | The lcd number of the lcd for which this entry contains display details. |
| 1.3.6.1.4.1.494.4.4.4.1.2 | ColumnringswitchLCDMsgText | read-only | mandatory | The actual lcd message text, including a carriage return after the first line, and a null character after the second line. |
| 1.3.6.1.4.1.494.4.5 | NoderingswitchLAN | |||
| 1.3.6.1.4.1.494.4.5.1 | TableringswitchLANTable | not-accessible | mandatory | A table that contains virtual LAN information configured into the Ringswitch by the network administrator. |
| 1.3.6.1.4.1.494.4.5.1.1 | RowringswitchLANEntry | not-accessible | mandatory | Name and status information associated with each virtual LAN entry. |
| 1.3.6.1.4.1.494.4.5.1.1.1 | ColumnringswitchLANIndex | read-only | mandatory | The virtual LAN number for which this entry contains virtual LAN details. |
| 1.3.6.1.4.1.494.4.5.1.1.2 | ColumnringswitchLANName | read-write | mandatory | The name that the administrator has given this virtual LAN. |
| 1.3.6.1.4.1.494.4.5.1.1.3 | ColumnringswitchLANPermeable | read-write | mandatory | In an 'impermeable' group, broadcast frames which were received on a port in the group, but were not originated in the group, are discarded. In a 'permeable' g… |
| 1.3.6.1.4.1.494.4.5.1.1.4 | ColumnringswitchLANStatus | read-write | mandatory | The current status of this virtual LAN, a status of 'invalid' indicates that the virtual LAN's associated name and ring list are meaningless until the group is… |
| 1.3.6.1.4.1.494.4.5.2 | TableringswitchLANRingTable | not-accessible | mandatory | A table that contains the rings associated with a virtual LAN that has been configured into the Ringswitch by the network administrator. |
| 1.3.6.1.4.1.494.4.5.2.1 | RowringswitchLANRingEntry | not-accessible | mandatory | Name and status information associated with each virtual LAN ring table entry. |
| 1.3.6.1.4.1.494.4.5.2.1.1 | ColumnringswitchLANRingGroup | read-only | mandatory | The virtual LAN index for which this entry contains virtual LAN ring details. |
| 1.3.6.1.4.1.494.4.5.2.1.2 | ColumnringswitchLANRingIndex | read-only | mandatory | The ring index for which this entry contains virtual LAN ring details. |
| 1.3.6.1.4.1.494.4.5.2.1.3 | ColumnringswitchLANRingNum | read-write | mandatory | The ring number contained in the virtual LAN. |
| 1.3.6.1.4.1.494.4.5.2.1.4 | ColumnringswitchLANRingStatus | read-write | mandatory | The current status of this virtual LAN ring entry, a status of 'invalid' indicates that the ring entry is not in use and the associated ring number is meaningl… |