MALLOC-MIB
95 objects
The MIB module for management of multicast address allocation. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3559; see the RFC itself for full legal notices.
Imported Objects
| IANA-MALLOC-MIB | IANAmallocRangeSource IANAscopeSource |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| IPMROUTE-STD-MIB | LanguageTag |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 mib-2 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.101 | IdentitymallocMIB | The MIB module for management of multicast address allocation. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3559; … | ||
| 1.3.6.1.2.1.101.1 | NodemallocMIBObjects | |||
| 1.3.6.1.2.1.101.1.1 | Nodemalloc | |||
| 1.3.6.1.2.1.101.1.1.1 | ScalarmallocCapabilities | read-only | current | This object describes the capabilities which a client or server supports. The startTime bit indicates that allocations with a future start time are supported. … |
| 1.3.6.1.2.1.101.1.1.2 | TablemallocScopeTable | not-accessible | current | The (conceptual) table containing information on multicast scopes from which addresses may be allocated. Entries in this table may be dynamically discovered vi… |
| 1.3.6.1.2.1.101.1.1.2.1 | RowmallocScopeEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular multicast scope. |
| 1.3.6.1.2.1.101.1.1.2.1.1 | ColumnmallocScopeAddressType | not-accessible | current | The type of the addresses in the multicast scope range. Legal values correspond to the subset of address families for which multicast address allocation is sup… |
| 1.3.6.1.2.1.101.1.1.2.1.2 | ColumnmallocScopeFirstAddress | not-accessible | current | The first address in the multicast scope range. The type of this address is determined by the value of the mallocScopeAddressType object. |
| 1.3.6.1.2.1.101.1.1.2.1.3 | ColumnmallocScopeLastAddress | read-create | current | The last address in the multicast scope range. The type of this address is determined by the value of the mallocScopeAddressType object. |
| 1.3.6.1.2.1.101.1.1.2.1.4 | ColumnmallocScopeHopLimit | read-create | current | The default IPv4 TTL or IPv6 hop limit which applications should use for groups within the scope. |
| 1.3.6.1.2.1.101.1.1.2.1.5 | ColumnmallocScopeStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. If write access is supported, the other writable objects i… |
| 1.3.6.1.2.1.101.1.1.2.1.6 | ColumnmallocScopeSource | read-only | current | The method by which this entry was learned. |
| 1.3.6.1.2.1.101.1.1.2.1.7 | ColumnmallocScopeDivisible | read-create | current | If false, the server may allocate addresses out of the entire range. If true, the server must not allocate addresses out of the entire range, but may only allo… |
| 1.3.6.1.2.1.101.1.1.2.1.8 | ColumnmallocScopeServerAddressType | read-create | current | The type of the address of a multicast address allocation server to which a request may be sent. |
| 1.3.6.1.2.1.101.1.1.2.1.9 | ColumnmallocScopeServerAddress | read-create | current | The address of a multicast address allocation server to which a request may be sent. The default value is an zero- length address, indicating that no server is… |
| 1.3.6.1.2.1.101.1.1.2.1.10 | ColumnmallocScopeSSM | read-create | current | Indicates whether the scope is a Source-Specific Multicast (SSM) range. |
| 1.3.6.1.2.1.101.1.1.2.1.11 | ColumnmallocScopeStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.101.1.1.3 | TablemallocScopeNameTable | not-accessible | current | The (conceptual) table containing information on multicast scope names. Entries in this table may be dynamically discovered via some other protocol, such as MZ… |
| 1.3.6.1.2.1.101.1.1.3.1 | RowmallocScopeNameEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular multicast scope name. |
| 1.3.6.1.2.1.101.1.1.3.1.1 | ColumnmallocScopeNameLangName | not-accessible | current | The RFC 3066 language tag for the language of the scope name. |
| 1.3.6.1.2.1.101.1.1.3.1.2 | ColumnmallocScopeNameScopeName | read-create | current | The textual name associated with the multicast scope. The value of this object should be suitable for displaying to end-users, such as when allocating a multic… |
| 1.3.6.1.2.1.101.1.1.3.1.3 | ColumnmallocScopeNameDefault | read-create | current | If true, indicates a preference that the name in the associated language should be used by applications if no name is available in a desired language. |
| 1.3.6.1.2.1.101.1.1.3.1.4 | ColumnmallocScopeNameStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. If write access is supported, the other writable objects i… |
| 1.3.6.1.2.1.101.1.1.3.1.5 | ColumnmallocScopeNameStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.101.1.1.4 | TablemallocAllocRangeTable | not-accessible | current | The (conceptual) table containing information on subranges of addresses from which the device may allocate addresses, if it is a MAAS. If the device is a Prefi… |
| 1.3.6.1.2.1.101.1.1.4.1 | RowmallocAllocRangeEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular allocation range. |
| 1.3.6.1.2.1.101.1.1.4.1.1 | ColumnmallocAllocRangeFirstAddress | not-accessible | current | The first address in the allocation range. The type of this address is determined by the value of the mallocScopeAddressType object. |
| 1.3.6.1.2.1.101.1.1.4.1.2 | ColumnmallocAllocRangeLastAddress | read-create | current | The last address in the allocation range. The type of this address is determined by the value of the mallocScopeAddressType object. |
| 1.3.6.1.2.1.101.1.1.4.1.3 | ColumnmallocAllocRangeStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. If write access is supported, the other writable objects i… |
| 1.3.6.1.2.1.101.1.1.4.1.4 | ColumnmallocAllocRangeSource | read-only | current | The means by which this entry was learned. |
| 1.3.6.1.2.1.101.1.1.4.1.5 | ColumnmallocAllocRangeLifetime | read-create | current | The number of seconds remaining in the lifetime of the (sub)range out of which addresses are being allocated. A value of 0 indicates that the range is not subj… |
| 1.3.6.1.2.1.101.1.1.4.1.6 | ColumnmallocAllocRangeMaxLeaseAddrs | read-create | current | The maximum number of addresses which the server is willing to grant for each future request in this range. A value of 0 means that no specific limit is enforc… |
| 1.3.6.1.2.1.101.1.1.4.1.7 | ColumnmallocAllocRangeMaxLeaseTime | read-create | current | The maximum lifetime which the server will grant for future requests in this range. A value of 0 means that no additional limit is enforced beyond that of mall… |
| 1.3.6.1.2.1.101.1.1.4.1.8 | ColumnmallocAllocRangeNumAllocatedAddrs | read-only | current | The number of addresses in the range which have been allocated. This value can be used to determine the current address space utilization within the scoped ran… |
| 1.3.6.1.2.1.101.1.1.4.1.9 | ColumnmallocAllocRangeNumOfferedAddrs | read-only | current | The number of addresses in the range which have been offered. This number should match the sum of mallocRequestNumAddrs for all entries in the mallocRequestTab… |
| 1.3.6.1.2.1.101.1.1.4.1.10 | ColumnmallocAllocRangeNumWaitingAddrs | read-only | current | The number of addresses in the range which have been requested, but whose state is waiting, while the server attempts to acquire more address space. |
| 1.3.6.1.2.1.101.1.1.4.1.11 | ColumnmallocAllocRangeNumTryingAddrs | read-only | current | The number of addresses in the scope covered by entries in the mallocRequestTable in the trying state. |
| 1.3.6.1.2.1.101.1.1.4.1.12 | ColumnmallocAllocRangeAdvertisable | read-create | current | The value of this object is true if the range is eligible to be advertised to other MAASs. When the row is first created, the default value of this object is t… |
| 1.3.6.1.2.1.101.1.1.4.1.13 | ColumnmallocAllocRangeTotalAllocatedAddrs | read-only | current | The approximate number of addresses in the range which have been allocated by any MAAS, as determined by a Prefix Coordinator. This object need only be present… |
| 1.3.6.1.2.1.101.1.1.4.1.14 | ColumnmallocAllocRangeTotalRequestedAddrs | read-only | current | The approximate number of addresses in the range for which there is potential demand among MAASs, as determined by a Prefix Coordinator. This object need only … |
| 1.3.6.1.2.1.101.1.1.4.1.15 | ColumnmallocAllocRangeStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.101.1.1.5 | TablemallocRequestTable | not-accessible | current | The (conceptual) table containing information on allocation requests, whether allocated or in progress. This table may also be used to determine which clients … |
| 1.3.6.1.2.1.101.1.1.5.1 | RowmallocRequestEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular allocation request. |
| 1.3.6.1.2.1.101.1.1.5.1.1 | ColumnmallocRequestId | not-accessible | current | An arbitrary value identifying this row. |
| 1.3.6.1.2.1.101.1.1.5.1.2 | ColumnmallocRequestScopeAddressType | read-only | current | The type of the first address of the scope to which the request applies. Legal values correspond to the subset of address families for which multicast address … |
| 1.3.6.1.2.1.101.1.1.5.1.3 | ColumnmallocRequestScopeFirstAddress | read-only | current | The first address of the scope to which the request applies. This must match mallocScopeFirstAddress for some row in the mallocScopeTable. The type of this add… |
| 1.3.6.1.2.1.101.1.1.5.1.4 | ColumnmallocRequestStartTime | read-only | current | The number of seconds remaining before the start time of the request. A value of 0 means that the allocation is currently in effect. |
| 1.3.6.1.2.1.101.1.1.5.1.5 | ColumnmallocRequestEndTime | read-only | current | The number of seconds remaining before the end time of the request. |
| 1.3.6.1.2.1.101.1.1.5.1.6 | ColumnmallocRequestNumAddrs | read-only | current | The number of addresses requested. If the addresses have been allocated, this number should match the total number of addresses for this request covered by ent… |
| 1.3.6.1.2.1.101.1.1.5.1.7 | ColumnmallocRequestState | read-only | current | The state of the request. A value of allocated(1) indicates that one or more entries for this request are present in the mallocAddressTable. A value of offered… |
| 1.3.6.1.2.1.101.1.1.5.1.8 | ColumnmallocRequestClientAddressType | read-only | current | The type of the address of the client that (last) requested this allocation. |
| 1.3.6.1.2.1.101.1.1.5.1.9 | ColumnmallocRequestClientAddress | read-only | current | The address of the client that (last) requested this allocation. The type of this address is determined by the value of the mallocRequestClientAddressType obje… |
| 1.3.6.1.2.1.101.1.1.5.1.10 | ColumnmallocRequestServerAddressType | read-only | current | The type of the address of the server to which the request was (last) sent. |
| 1.3.6.1.2.1.101.1.1.5.1.11 | ColumnmallocRequestServerAddress | read-only | current | The address of the server to which the request was (last) sent. The type of this address is determined by the value of the mallocRequestServerAddressType objec… |
| 1.3.6.1.2.1.101.1.1.5.1.12 | ColumnmallocRequestLeaseIdentifier | read-only | current | The Lease Identifier of this request. If the allocation mechanism in use does not use Lease Identifiers, then the value is a 0-length string. |
| 1.3.6.1.2.1.101.1.1.6 | TablemallocAddressTable | not-accessible | current | The (conceptual) table containing information on blocks of allocated addresses. This table may be used to map a given multicast group address to the associated… |
| 1.3.6.1.2.1.101.1.1.6.1 | RowmallocAddressEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular block of allocated addresses. The block of addresses covered by each entry in this table m… |
| 1.3.6.1.2.1.101.1.1.6.1.1 | ColumnmallocAddressAddressType | not-accessible | current | The type of the first address in the allocated block. Legal values correspond to the subset of address families for which multicast address allocation is suppo… |
| 1.3.6.1.2.1.101.1.1.6.1.2 | ColumnmallocAddressFirstAddress | not-accessible | current | The first address in the allocated block. The type of this address is determined by the value of the mallocAddressAddressType object. |
| 1.3.6.1.2.1.101.1.1.6.1.3 | ColumnmallocAddressNumAddrs | read-only | current | The number of addresses in the allocated block. |
| 1.3.6.1.2.1.101.1.1.6.1.4 | ColumnmallocAddressRequestId | read-only | current | The index of the request which caused this block of addresses to be allocated. This value must match the value of mallocRequestId for some entry in the mallocR… |
| 1.3.6.1.2.1.101.1.2 | Nodemadcap | |||
| 1.3.6.1.2.1.101.1.2.1 | IdentitymadcapConfig | current | Group of objects that count various MADCAP events. | |
| 1.3.6.1.2.1.101.1.2.1.1 | ScalarmadcapConfigExtraAllocationTime | read-write | current | The amount of extra time on either side of a lease which the MADCAP server allocates to allow for clock skew among clients. |
| 1.3.6.1.2.1.101.1.2.1.2 | ScalarmadcapConfigNoResponseDelay | read-write | current | The amount of time the MADCAP client allows for receiving a response from a MADCAP server. |
| 1.3.6.1.2.1.101.1.2.1.3 | ScalarmadcapConfigOfferHold | read-write | current | The amount of time the MADCAP server will reserve an address for after sending an OFFER message in anticipation of receiving a REQUEST message. |
| 1.3.6.1.2.1.101.1.2.1.4 | ScalarmadcapConfigResponseCacheInterval | read-write | current | The amount of time the MADCAP server uses to detect duplicate messages. |
| 1.3.6.1.2.1.101.1.2.1.5 | ScalarmadcapConfigClockSkewAllowance | read-write | current | The clock skew threshold used by the MADCAP server to generate Excessive Clock Skew errors. |
| 1.3.6.1.2.1.101.1.2.2 | IdentitymadcapCounters | current | A group of objects that count various MADCAP events. | |
| 1.3.6.1.2.1.101.1.2.2.1 | ScalarmadcapTotalErrors | read-only | current | The total number of transactions for which the MADCAP server has detected an error of any type, regardless of whether the server ignored the request or generat… |
| 1.3.6.1.2.1.101.1.2.2.2 | ScalarmadcapRequestsDenied | read-only | current | The number of valid requests for which the MADCAP server could not complete an allocation, regardless of whether NAKs were sent. This corresponds to the Valid … |
| 1.3.6.1.2.1.101.1.2.2.3 | ScalarmadcapInvalidRequests | read-only | current | The number of invalid requests received by the MADCAP server, regardless of whether NAKs were sent. This corresponds to the Invalid Request error code in MADCA… |
| 1.3.6.1.2.1.101.1.2.2.4 | ScalarmadcapExcessiveClockSkews | read-only | current | The number of requests received by the MADCAP server with an excessive clock skew, regardless of whether NAKs were sent. This corresponds to the Excessive Cloc… |
| 1.3.6.1.2.1.101.1.2.2.5 | ScalarmadcapBadLeaseIds | read-only | current | The number of requests received by the MADCAP server with an unrecognized Lease Identifier, regardless of whether NAKs were sent. This corresponds to the Lease… |
| 1.3.6.1.2.1.101.1.2.2.6 | ScalarmadcapDiscovers | read-only | current | The number of DISCOVER messages received by the MADCAP server. |
| 1.3.6.1.2.1.101.1.2.2.7 | ScalarmadcapInforms | read-only | current | The number of INFORM messages received by the MADCAP server. |
| 1.3.6.1.2.1.101.1.2.2.8 | ScalarmadcapRequests | read-only | current | The number of REQUEST messages received by the MADCAP server. |
| 1.3.6.1.2.1.101.1.2.2.9 | ScalarmadcapRenews | read-only | current | The number of RENEW messages received by the MADCAP server. |
| 1.3.6.1.2.1.101.1.2.2.10 | ScalarmadcapReleases | read-only | current | The number of RELEASE messages received by the MADCAP server. |
| 1.3.6.1.2.1.101.2 | NodemallocConformance | |||
| 1.3.6.1.2.1.101.2.1 | NodemallocCompliances | |||
| 1.3.6.1.2.1.101.2.1.1 | CompliancemallocServerReadOnlyCompliance | read-only | current | The compliance statement for multicast address allocation servers implementing the MALLOC MIB without support for read-create (i.e., in read-only mode). Such a… |
| 1.3.6.1.2.1.101.2.1.2 | CompliancemallocClientReadOnlyCompliance | read-only | current | The compliance statement for clients implementing the MALLOC MIB without support for read-create (i.e., in read- only mode). Such clients can then be monitored… |
| 1.3.6.1.2.1.101.2.1.3 | CompliancemallocPrefixCoordinatorReadOnlyCompliance | read-only | current | The compliance statement for prefix coordinators implementing the MALLOC MIB without support for read-create (i.e., in read-only mode). Such devices can then b… |
| 1.3.6.1.2.1.101.2.1.4 | CompliancemallocServerFullCompliance | current | The compliance statement for multicast address allocation servers implementing the MALLOC MIB with support for read- create. Such servers can then be both moni… | |
| 1.3.6.1.2.1.101.2.1.5 | CompliancemallocClientFullCompliance | current | The compliance statement for hosts implementing the MALLOC MIB with support for read-create. Such clients can then be both monitored and configured with this M… | |
| 1.3.6.1.2.1.101.2.1.6 | CompliancemallocPrefixCoordinatorFullCompliance | current | The compliance statement for prefix coordinators implementing the MALLOC MIB with support for read-create. Such devices can then be both monitored and configur… | |
| 1.3.6.1.2.1.101.2.2 | NodemallocGroups | |||
| 1.3.6.1.2.1.101.2.2.1 | GroupmallocBasicGroup | current | The basic collection of objects providing management of IP multicast address allocation. | |
| 1.3.6.1.2.1.101.2.2.2 | GroupmallocServerGroup | current | A collection of objects providing management of multicast address allocation in servers. | |
| 1.3.6.1.2.1.101.2.2.3 | GroupmallocClientGroup | current | A collection of objects providing management of multicast address allocation in clients. | |
| 1.3.6.1.2.1.101.2.2.4 | GroupmadcapServerGroup | current | A collection of objects providing management of MADCAP servers. | |
| 1.3.6.1.2.1.101.2.2.5 | GroupmadcapClientGroup | current | A collection of objects providing management of MADCAP clients. | |
| 1.3.6.1.2.1.101.2.2.6 | GroupmallocClientScopeGroup | current | A collection of objects providing management of multicast scope information in clients. | |
| 1.3.6.1.2.1.101.2.2.7 | GroupmallocPrefixCoordinatorGroup | current | A collection of objects for managing Prefix Coordinators. |