MBG-SNMP-LT-MIB
367 objects
Meinberg SNMP Management Information Base
Imported Objects
| MBG-SNMP-ROOT-MIB | mbgSnmpRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5597.3 | IdentitymbgLantime | Meinberg SNMP Management Information Base | ||
| 1.3.6.1.4.1.5597.3.0 | NodembgLtInfo | |||
| 1.3.6.1.4.1.5597.3.0.1 | ScalarmbgLtFirmwareVersion | read-only | current | shows the installed firmware version of your LANTIME |
| 1.3.6.1.4.1.5597.3.0.2 | ScalarmbgLtFirmwareVersionVal | read-only | current | shows the installed firmware version of your LANTIME as an Integer32 value |
| 1.3.6.1.4.1.5597.3.1 | NodembgLtNtp | |||
| 1.3.6.1.4.1.5597.3.1.1 | ScalarmbgLtNtpCurrentState | read-only | current | actual state of the NTP as string |
| 1.3.6.1.4.1.5597.3.1.2 | ScalarmbgLtNtpCurrentStateVal | read-only | current | current state of the NTP as Integer32 value |
| 1.3.6.1.4.1.5597.3.1.3 | ScalarmbgLtNtpStratum | read-only | current | Stratum value of the NTP |
| 1.3.6.1.4.1.5597.3.1.4 | ScalarmbgLtNtpActiveRefclockId | read-only | current | Index of the current refclock selected by the NTP |
| 1.3.6.1.4.1.5597.3.1.5 | ScalarmbgLtNtpActiveRefclockName | read-only | current | Name of the current refclock selected by the NTP |
| 1.3.6.1.4.1.5597.3.1.6 | ScalarmbgLtNtpActiveRefclockOffset | read-only | current | Time offset between the current selected refclock and time of NTP as string |
| 1.3.6.1.4.1.5597.3.1.7 | ScalarmbgLtNtpActiveRefclockOffsetVal | read-only | current | Time offset in micro seconds between the current selected refclock and time of NTP |
| 1.3.6.1.4.1.5597.3.1.8 | ScalarmbgLtNtpNumberOfRefclocks | read-only | current | Number of refclocks configured in the NTP |
| 1.3.6.1.4.1.5597.3.1.9 | ScalarmbgLtNtpAuthKeyId | read-only | current | Authentication Key ID of active refclock is active |
| 1.3.6.1.4.1.5597.3.1.10 | ScalarmbgLtNtpVersion | read-only | current | integrated NTP version |
| 1.3.6.1.4.1.5597.3.2 | NodembgLtRefclock | |||
| 1.3.6.1.4.1.5597.3.2.1 | ScalarmbgLtRefClockType | read-only | current | Type of refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.2 | ScalarmbgLtRefClockTypeVal | read-only | current | Type of refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.3 | ScalarmbgLtRefClockMode | read-only | current | current mode of refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.4 | ScalarmbgLtRefClockModeVal | read-only | current | current mode of refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.5 | ScalarmbgLtRefGpsState | read-only | current | current State of GPS refclock conneted to NTP time server |
| 1.3.6.1.4.1.5597.3.2.6 | ScalarmbgLtRefGpsStateVal | read-only | current | current State of GPS refclock conneted to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.7 | ScalarmbgLtRefGpsPosition | read-only | current | current Position of GPS refclock conneted to NTP time server |
| 1.3.6.1.4.1.5597.3.2.8 | ScalarmbgLtRefGpsSatellites | read-only | current | current Satellites in view and good of GPS refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.9 | ScalarmbgLtRefGpsSatellitesGood | read-only | current | current good Satellites of GPS refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.10 | ScalarmbgLtRefGpsSatellitesInView | read-only | current | current Satellites in view of GPS refclock conneted to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.11 | ScalarmbgLtRefPzfState | read-only | current | current State of DCF77/PZF refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.12 | ScalarmbgLtRefPzfStateVal | read-only | current | current State of DCF77/PZF refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.13 | ScalarmbgLtRefPzfKorrelation | read-only | current | current Korrelation of DCF77/PZF refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.14 | ScalarmbgLtRefPzfField | read-only | current | current strength of field of DCF77/PZF refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.15 | ScalarmbgLtRefGpsMode | read-only | current | current Mode of GPS refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.16 | ScalarmbgLtRefGpsModeVal | read-only | current | current Mode of GPS refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.17 | ScalarmbgLtRefIrigMode | read-only | current | current Mode of IRIG refclock conneted to NTP time server |
| 1.3.6.1.4.1.5597.3.2.18 | ScalarmbgLtRefIrigModeVal | read-only | current | current Mode of IRIG refclock conneted to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.19 | ScalarmbgLtRefPzfMode | read-only | current | current Mode of PZF refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.20 | ScalarmbgLtRefPzfModeVal | read-only | current | current Mode of PZF refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.21 | ScalarmbgLtRefIrigState | read-only | current | current State of IRIG refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.22 | ScalarmbgLtRefIrigStateVal | read-only | current | current State of IRIG refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.23 | ScalarmbgLtRefSHSMode | read-only | current | current Mode of SHS system connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.24 | ScalarmbgLtRefSHSModeVal | read-only | current | current Mode of SHS system connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.25 | ScalarmbgLtRefSHSTimeDiff | read-only | current | current time difference between the two SHS reference time sources in miliseconds |
| 1.3.6.1.4.1.5597.3.2.26 | ScalarmbgLtRefDctState | read-only | current | current State of DCF77 refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.27 | ScalarmbgLtRefDctStateVal | read-only | current | current State of DCF77 refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.28 | ScalarmbgLtRefDctField | read-only | current | current strength of field of DCF77 refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.29 | ScalarmbgLtRefDctMode | read-only | current | current Mode of DCF77 refclock connected to NTP time server |
| 1.3.6.1.4.1.5597.3.2.30 | ScalarmbgLtRefDctModeVal | read-only | current | current Mode of DCF77 refclock connected to NTP time server as value |
| 1.3.6.1.4.1.5597.3.2.31 | ScalarmbgLtRefGpsLeapSecond | read-only | current | Date and Time of leap second announcement received via GPS |
| 1.3.6.1.4.1.5597.3.2.32 | ScalarmbgLtRefGpsLeapCorrection | read-only | current | Leap Second Correction received via GPS |
| 1.3.6.1.4.1.5597.3.2.50 | NodembgLtMrs | |||
| 1.3.6.1.4.1.5597.3.2.50.1 | ScalarmbgLtRefMrsRef | read-only | current | ID of currently active reference source as a string |
| 1.3.6.1.4.1.5597.3.2.50.2 | ScalarmbgLtRefMrsRefVal | read-only | current | currently active reference as a value |
| 1.3.6.1.4.1.5597.3.2.50.3 | ScalarmbgLtRefMrsRefList | read-only | current | List of all supported MRS references in a comma separated list |
| 1.3.6.1.4.1.5597.3.2.50.4 | ScalarmbgLtRefMrsPrioList | read-only | current | List of all active MRS references in a comma separated list sorted by priority |
| 1.3.6.1.4.1.5597.3.2.50.10 | NodembgLtMrsRef | |||
| 1.3.6.1.4.1.5597.3.2.50.10.1 | NodembgLtMrsRefGps | |||
| 1.3.6.1.4.1.5597.3.2.50.10.1.1 | ScalarmbgLtMrsGpsOffs | read-only | current | Offset of this reference to the currently active reference, unit included in the string |
| 1.3.6.1.4.1.5597.3.2.50.10.1.2 | ScalarmbgLtMrsGpsOffsVal | read-only | current | Offset of this reference to the currently active reference, unit see below |
| 1.3.6.1.4.1.5597.3.2.50.10.1.3 | ScalarmbgLtMrsGpsOffsBase | read-only | current | base of the offset value shown in mbgLtMrsGpsOffsVal |
| 1.3.6.1.4.1.5597.3.2.50.10.1.4 | ScalarmbgLtMrsGpsPrio | read-only | current | the configured priority of this reference |
| 1.3.6.1.4.1.5597.3.2.50.10.1.5 | ScalarmbgLtMrsGpsState | read-only | current | the current status of this reference as a string |
| 1.3.6.1.4.1.5597.3.2.50.10.1.6 | ScalarmbgLtMrsGpsStateVal | read-only | current | the current status of this reference as an Integer value |
| 1.3.6.1.4.1.5597.3.2.50.10.1.7 | ScalarmbgLtMrsGpsPrecision | read-write | current | Precision Factor of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.2 | NodembgLtMrsRefIrig | |||
| 1.3.6.1.4.1.5597.3.2.50.10.2.1 | ScalarmbgLtMrsIrigOffs | read-only | current | Offset of this reference to the currently active reference, unit included in the string |
| 1.3.6.1.4.1.5597.3.2.50.10.2.2 | ScalarmbgLtMrsIrigOffsVal | read-only | current | Offset of this reference to the currently active reference, unit see below |
| 1.3.6.1.4.1.5597.3.2.50.10.2.3 | ScalarmbgLtMrsIrigOffsBase | read-only | current | base of the offset value shown in mbgLtMrsIrigOffsVal |
| 1.3.6.1.4.1.5597.3.2.50.10.2.4 | ScalarmbgLtMrsIrigPrio | read-only | current | the configured priority of this reference |
| 1.3.6.1.4.1.5597.3.2.50.10.2.5 | ScalarmbgLtMrsIrigState | read-only | current | the current status of this reference as a string |
| 1.3.6.1.4.1.5597.3.2.50.10.2.6 | ScalarmbgLtMrsIrigStateVal | read-only | current | the current status of this reference as an Integer value |
| 1.3.6.1.4.1.5597.3.2.50.10.2.7 | ScalarmbgLtMrsIrigCorr | read-write | current | Correction Value (Fixed Offset) of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.2.8 | ScalarmbgLtMrsIrigOffsLimit | read-write | current | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| 1.3.6.1.4.1.5597.3.2.50.10.2.9 | ScalarmbgLtMrsIrigPrecision | read-write | current | Precision Factor of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.3 | NodembgLtMrsRefPps | |||
| 1.3.6.1.4.1.5597.3.2.50.10.3.1 | ScalarmbgLtMrsPpsOffs | read-only | current | Offset of this reference to the currently active reference, unit included in the string |
| 1.3.6.1.4.1.5597.3.2.50.10.3.2 | ScalarmbgLtMrsPpsOffsVal | read-only | current | Offset of this reference to the currently active reference, unit see below |
| 1.3.6.1.4.1.5597.3.2.50.10.3.3 | ScalarmbgLtMrsPpsOffsBase | read-only | current | base of the offset value shown in mbgLtMrsPpsOffsVal |
| 1.3.6.1.4.1.5597.3.2.50.10.3.4 | ScalarmbgLtMrsPpsPrio | read-only | current | the configured priority of this reference |
| 1.3.6.1.4.1.5597.3.2.50.10.3.5 | ScalarmbgLtMrsPpsState | read-only | current | the current status of this reference as a string |
| 1.3.6.1.4.1.5597.3.2.50.10.3.6 | ScalarmbgLtMrsPpsStateVal | read-only | current | the current status of this reference as an Integer value |
| 1.3.6.1.4.1.5597.3.2.50.10.3.7 | ScalarmbgLtMrsPpsCorr | read-write | current | Correction Value (Fixed Offset) of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.3.8 | ScalarmbgLtMrsPpsOffsLimit | read-write | current | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| 1.3.6.1.4.1.5597.3.2.50.10.3.9 | ScalarmbgLtMrsPpsPrecision | read-write | current | Precision Factor of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.4 | NodembgLtMrsRefFreq | |||
| 1.3.6.1.4.1.5597.3.2.50.10.4.1 | ScalarmbgLtMrsFreqOffs | read-only | current | Offset of this reference to the currently active reference, unit included in the string |
| 1.3.6.1.4.1.5597.3.2.50.10.4.2 | ScalarmbgLtMrsFreqOffsVal | read-only | current | Offset of this reference to the currently active reference, unit see below |
| 1.3.6.1.4.1.5597.3.2.50.10.4.3 | ScalarmbgLtMrsFreqOffsBase | read-only | current | base of the offset value shown in mbgLtMrsFreqOffsVal |
| 1.3.6.1.4.1.5597.3.2.50.10.4.4 | ScalarmbgLtMrsFreqPrio | read-only | current | the configured priority of this reference |
| 1.3.6.1.4.1.5597.3.2.50.10.4.5 | ScalarmbgLtMrsFreqState | read-only | current | the current status of this reference as a string |
| 1.3.6.1.4.1.5597.3.2.50.10.4.6 | ScalarmbgLtMrsFreqStateVal | read-only | current | the current status of this reference as an Integer value |
| 1.3.6.1.4.1.5597.3.2.50.10.4.7 | ScalarmbgLtMrsFreqCorr | read-write | current | Correction Value (Fixed Offset) of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.4.8 | ScalarmbgLtMrsFreqOffsLimit | read-write | current | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| 1.3.6.1.4.1.5597.3.2.50.10.4.9 | ScalarmbgLtMrsFreqPrecision | read-write | current | Precision Factor of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.5 | NodembgLtMrsRefPtp | |||
| 1.3.6.1.4.1.5597.3.2.50.10.5.1 | ScalarmbgLtMrsPtpOffs | read-only | current | Offset of this reference to the currently active reference, unit included in the string |
| 1.3.6.1.4.1.5597.3.2.50.10.5.2 | ScalarmbgLtMrsPtpOffsVal | read-only | current | Offset of this reference to the currently active reference, unit see below |
| 1.3.6.1.4.1.5597.3.2.50.10.5.3 | ScalarmbgLtMrsPtpOffsBase | read-only | current | base of the offset value shown in mbgLtMrsPtpOffsVal |
| 1.3.6.1.4.1.5597.3.2.50.10.5.4 | ScalarmbgLtMrsPtpPrio | read-only | current | the configured priority of this reference |
| 1.3.6.1.4.1.5597.3.2.50.10.5.5 | ScalarmbgLtMrsPtpState | read-only | current | the current status of this reference as a string |
| 1.3.6.1.4.1.5597.3.2.50.10.5.6 | ScalarmbgLtMrsPtpStateVal | read-only | current | the current status of this reference as an Integer value |
| 1.3.6.1.4.1.5597.3.2.50.10.5.7 | ScalarmbgLtMrsPtpCorr | read-write | current | Correction Value (Fixed Offset) of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.5.8 | ScalarmbgLtMrsPtpOffsLimit | read-write | current | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| 1.3.6.1.4.1.5597.3.2.50.10.5.9 | ScalarmbgLtMrsPtpPrecision | read-write | current | Precision Factor of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.6 | NodembgLtMrsRefNtp | |||
| 1.3.6.1.4.1.5597.3.2.50.10.6.1 | ScalarmbgLtMrsNtpOffs | read-only | current | Offset of this reference to the currently active reference, unit included in the string |
| 1.3.6.1.4.1.5597.3.2.50.10.6.2 | ScalarmbgLtMrsNtpOffsVal | read-only | current | Offset of this reference to the currently active reference, unit see below |
| 1.3.6.1.4.1.5597.3.2.50.10.6.3 | ScalarmbgLtMrsNtpOffsBase | read-only | current | base of the offset value shown in mbgLtMrsNtpOffsVal |
| 1.3.6.1.4.1.5597.3.2.50.10.6.4 | ScalarmbgLtMrsNtpPrio | read-only | current | the configured priority of this reference |
| 1.3.6.1.4.1.5597.3.2.50.10.6.5 | ScalarmbgLtMrsNtpState | read-only | current | the current status of this reference as a string |
| 1.3.6.1.4.1.5597.3.2.50.10.6.6 | ScalarmbgLtMrsNtpStateVal | read-only | current | the current status of this reference as an Integer value |
| 1.3.6.1.4.1.5597.3.2.50.10.6.7 | ScalarmbgLtMrsNtpCorr | read-write | current | Correction Value (Fixed Offset) of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.2.50.10.6.8 | ScalarmbgLtMrsNtpOffsLimit | read-write | current | Offset Limit in nanoseconds, if exceeded this will trigger a notification |
| 1.3.6.1.4.1.5597.3.2.50.10.6.9 | ScalarmbgLtMrsNtpPrecision | read-write | current | Precision Factor of this reference in nanoseconds |
| 1.3.6.1.4.1.5597.3.3 | NodembgLtNotifications | |||
| 1.3.6.1.4.1.5597.3.3.0 | NodembgLtTraps | |||
| 1.3.6.1.4.1.5597.3.3.0.1 | NotificationmbgLtTrapNTPNotSync | current | trap to be sent when NTP is not synchronised | |
| 1.3.6.1.4.1.5597.3.3.0.2 | NotificationmbgLtTrapNTPStopped | current | trap to be sent when NTP is stopped | |
| 1.3.6.1.4.1.5597.3.3.0.3 | NotificationmbgLtTrapServerBoot | current | trap to be sent when time server has finished boot sequence | |
| 1.3.6.1.4.1.5597.3.3.0.4 | NotificationmbgLtTrapReceiverNotResponding | current | trap to be sent when receiver is not responding | |
| 1.3.6.1.4.1.5597.3.3.0.5 | NotificationmbgLtTrapReceiverNotSync | current | trap to be sent when receiver is not synchronised | |
| 1.3.6.1.4.1.5597.3.3.0.6 | NotificationmbgLtTrapAntennaFaulty | current | trap to be sent when connection to antenna is broken | |
| 1.3.6.1.4.1.5597.3.3.0.7 | NotificationmbgLtTrapAntennaReconnect | current | trap to be sent when antenna has been reconnected | |
| 1.3.6.1.4.1.5597.3.3.0.8 | NotificationmbgLtTrapConfigChanged | current | trap to be sent when timeserver reloaded its configuration | |
| 1.3.6.1.4.1.5597.3.3.0.9 | NotificationmbgLtTrapLeapSecondAnnounced | current | trap to be sent when a leap second has been announced | |
| 1.3.6.1.4.1.5597.3.3.0.10 | NotificationmbgLtTrapSHSTimeLimitError | current | trap to be sent when SHS timelimit exceeded | |
| 1.3.6.1.4.1.5597.3.3.0.11 | NotificationmbgLtTrapSecondaryRecNotSync | current | trap to be sent when secondary receiver in SHS system is not synchronised | |
| 1.3.6.1.4.1.5597.3.3.0.12 | NotificationmbgLtTrapPowerSupplyFailure | current | trap to be sent when one of the redundant power supplies fails | |
| 1.3.6.1.4.1.5597.3.3.0.13 | NotificationmbgLtTrapAntennaShortCircuit | current | trap to be sent when a connected antenna fails due to a short circuit | |
| 1.3.6.1.4.1.5597.3.3.0.14 | NotificationmbgLtTrapReceiverSync | current | trap to be sent when receiver is synchronised | |
| 1.3.6.1.4.1.5597.3.3.0.15 | NotificationmbgLtTrapNTPClientAlarm | current | trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable. | |
| 1.3.6.1.4.1.5597.3.3.0.16 | NotificationmbgLtTrapPowerSupplyUp | current | trap to be sent when a power supply returned to a healthy state. | |
| 1.3.6.1.4.1.5597.3.3.0.17 | NotificationmbgLtTrapNetworkDown | current | trap to be sent when a monitored network port is down. | |
| 1.3.6.1.4.1.5597.3.3.0.18 | NotificationmbgLtTrapNetworkUp | current | trap to be sent when a monitored network port is up. | |
| 1.3.6.1.4.1.5597.3.3.0.19 | NotificationmbgLtTrapSecondaryRecNotResp | current | trap to be sent when secondary receiver is not responding | |
| 1.3.6.1.4.1.5597.3.3.0.30 | NotificationmbgLtTrapXmrLimitExceeded | current | trap to be sent when a reference offset exceeds the configured limit | |
| 1.3.6.1.4.1.5597.3.3.0.31 | NotificationmbgLtTrapXmrRefDisconnect | current | trap to be sent when a reference signal has been lost | |
| 1.3.6.1.4.1.5597.3.3.0.32 | NotificationmbgLtTrapXmrRefReconnect | current | trap to be sent when a reference signal recovered | |
| 1.3.6.1.4.1.5597.3.3.0.33 | NotificationmbgLtTrapFdmError | current | trap to be sent when the Fdm module generates an alarm | |
| 1.3.6.1.4.1.5597.3.3.0.34 | NotificationmbgLtTrapSHSTimeLimitWarning | current | trap to be sent when SHS warning limit exceeded | |
| 1.3.6.1.4.1.5597.3.3.0.35 | NotificationmbgLtTrapSecondaryRecSync | current | trap to be sent when secondary receiver is synchronised | |
| 1.3.6.1.4.1.5597.3.3.0.36 | NotificationmbgLtTrapNTPSync | current | trap to be sent when NTP is synchronised | |
| 1.3.6.1.4.1.5597.3.3.0.37 | NotificationmbgLtTrapPtpPortDisconnected | current | trap to be sent when PTP network port got disconnected | |
| 1.3.6.1.4.1.5597.3.3.0.38 | NotificationmbgLtTrapPtpPortConnected | current | trap to be sent when PTP network port got connected | |
| 1.3.6.1.4.1.5597.3.3.0.39 | NotificationmbgLtTrapPtpStateChanged | current | trap to be sent when PTP state changed (e.g. from 'passive' to 'master') | |
| 1.3.6.1.4.1.5597.3.3.0.40 | NotificationmbgLtTrapPtpError | current | trap to be sent when PTP raised an error | |
| 1.3.6.1.4.1.5597.3.3.0.77 | NotificationmbgLtTrapNormalOperation | current | trap to be sent when the system returned to a healthy state | |
| 1.3.6.1.4.1.5597.3.3.0.88 | NotificationmbgLtTrapHeartbeat | current | trap to be sent periodically to indicate that time server is still alive | |
| 1.3.6.1.4.1.5597.3.3.0.99 | NotificationmbgLtTrapTestNotification | current | trap to be sent when a test notification has been requested | |
| 1.3.6.1.4.1.5597.3.3.0.100 | ScalarmbgLtTrapMessage | read-only | current | used as a payload object for all traps, holds a clear text event message |
| 1.3.6.1.4.1.5597.3.4 | NodembgLtCfg | |||
| 1.3.6.1.4.1.5597.3.4.1 | NodembgLtCfgNetwork | |||
| 1.3.6.1.4.1.5597.3.4.1.1 | ScalarmbgLtCfgHostname | read-write | current | The hostname configured for this LANTIME |
| 1.3.6.1.4.1.5597.3.4.1.2 | ScalarmbgLtCfgDomainname | read-write | current | The domainname configured for this LANTIME |
| 1.3.6.1.4.1.5597.3.4.1.3 | ScalarmbgLtCfgNameserver1 | read-write | current | The first nameserver used by this LANTIME |
| 1.3.6.1.4.1.5597.3.4.1.4 | ScalarmbgLtCfgNameserver2 | read-write | current | The second nameserver used this LANTIME |
| 1.3.6.1.4.1.5597.3.4.1.5 | ScalarmbgLtCfgSyslogserver1 | read-write | current | The first syslog server we are sending log entries to |
| 1.3.6.1.4.1.5597.3.4.1.6 | ScalarmbgLtCfgSyslogserver2 | read-write | current | The second syslog server we are sending log entries to |
| 1.3.6.1.4.1.5597.3.4.1.7 | ScalarmbgLtCfgTelnetAccess | read-write | current | Is telnet administration enabled |
| 1.3.6.1.4.1.5597.3.4.1.8 | ScalarmbgLtCfgFTPAccess | read-write | current | Is FTP administration enabled |
| 1.3.6.1.4.1.5597.3.4.1.9 | ScalarmbgLtCfgHTTPAccess | read-write | current | Is web based administration enabled |
| 1.3.6.1.4.1.5597.3.4.1.10 | ScalarmbgLtCfgHTTPSAccess | read-write | current | Is secure web based administration enabled |
| 1.3.6.1.4.1.5597.3.4.1.11 | ScalarmbgLtCfgSNMPAccess | read-write | current | Is SNMP administration enabled |
| 1.3.6.1.4.1.5597.3.4.1.12 | ScalarmbgLtCfgSambaAccess | read-write | current | Is Samba administration enabled |
| 1.3.6.1.4.1.5597.3.4.1.13 | ScalarmbgLtCfgIPv6Access | read-write | current | Is IPv6 support enabled |
| 1.3.6.1.4.1.5597.3.4.1.14 | ScalarmbgLtCfgSSHAccess | read-write | current | Is SSH administration enabled |
| 1.3.6.1.4.1.5597.3.4.2 | NodembgLtCfgNTP | |||
| 1.3.6.1.4.1.5597.3.4.2.1 | NodembgLtCfgNTPServer1 | |||
| 1.3.6.1.4.1.5597.3.4.2.1.1 | ScalarmbgLtCfgNTPServer1IP | read-write | current | IP address for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.1.2 | ScalarmbgLtCfgNTPServer1Key | read-write | current | Key for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.1.3 | ScalarmbgLtCfgNTPServer1Autokey | read-write | current | Is autokey enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.1.4 | ScalarmbgLtCfgNTPServer1Prefer | read-write | current | Is the preferred flag enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.2 | NodembgLtCfgNTPServer2 | |||
| 1.3.6.1.4.1.5597.3.4.2.2.1 | ScalarmbgLtCfgNTPServer2IP | read-write | current | IP address for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.2.2 | ScalarmbgLtCfgNTPServer2Key | read-write | current | Key for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.2.3 | ScalarmbgLtCfgNTPServer2Autokey | read-write | current | Is autokey enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.2.4 | ScalarmbgLtCfgNTPServer2Prefer | read-write | current | Is the preferred flag enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.3 | NodembgLtCfgNTPServer3 | |||
| 1.3.6.1.4.1.5597.3.4.2.3.1 | ScalarmbgLtCfgNTPServer3IP | read-write | current | IP address for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.3.2 | ScalarmbgLtCfgNTPServer3Key | read-write | current | Key for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.3.3 | ScalarmbgLtCfgNTPServer3Autokey | read-write | current | Is autokey enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.3.4 | ScalarmbgLtCfgNTPServer3Prefer | read-write | current | Is the preferred flag enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.4 | NodembgLtCfgNTPServer4 | |||
| 1.3.6.1.4.1.5597.3.4.2.4.1 | ScalarmbgLtCfgNTPServer4IP | read-write | current | IP address for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.4.2 | ScalarmbgLtCfgNTPServer4Key | read-write | current | Key for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.4.3 | ScalarmbgLtCfgNTPServer4Autokey | read-write | current | Is autokey enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.4.4 | ScalarmbgLtCfgNTPServer4Prefer | read-write | current | Is the preferred flag enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.5 | NodembgLtCfgNTPServer5 | |||
| 1.3.6.1.4.1.5597.3.4.2.5.1 | ScalarmbgLtCfgNTPServer5IP | read-write | current | IP address for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.5.2 | ScalarmbgLtCfgNTPServer5Key | read-write | current | Key for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.5.3 | ScalarmbgLtCfgNTPServer5Autokey | read-write | current | Is autokey enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.5.4 | ScalarmbgLtCfgNTPServer5Prefer | read-write | current | Is the preferred flag enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.6 | NodembgLtCfgNTPServer6 | |||
| 1.3.6.1.4.1.5597.3.4.2.6.1 | ScalarmbgLtCfgNTPServer6IP | read-write | current | IP address for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.6.2 | ScalarmbgLtCfgNTPServer6Key | read-write | current | Key for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.6.3 | ScalarmbgLtCfgNTPServer6Autokey | read-write | current | Is autokey enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.6.4 | ScalarmbgLtCfgNTPServer6Prefer | read-write | current | Is the preferred flag enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.7 | NodembgLtCfgNTPServer7 | |||
| 1.3.6.1.4.1.5597.3.4.2.7.1 | ScalarmbgLtCfgNTPServer7IP | read-write | current | IP address for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.7.2 | ScalarmbgLtCfgNTPServer7Key | read-write | current | Key for external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.7.3 | ScalarmbgLtCfgNTPServer7Autokey | read-write | current | Is autokey enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.7.4 | ScalarmbgLtCfgNTPServer7Prefer | read-write | current | Is the preferred flag enabled for the external NTP server |
| 1.3.6.1.4.1.5597.3.4.2.8 | ScalarmbgLtCfgNTPStratumLocalClock | read-write | current | The stratum value assigned to the local clock of the timeserver |
| 1.3.6.1.4.1.5597.3.4.2.9 | ScalarmbgLtCfgNTPTrustedKey | read-write | current | The key used for the internal refclock of the timeserver |
| 1.3.6.1.4.1.5597.3.4.2.10 | ScalarmbgLtCfgNTPBroadcastIP | read-write | current | NTP broadcast IP address |
| 1.3.6.1.4.1.5597.3.4.2.11 | ScalarmbgLtCfgNTPBroadcastKey | read-write | current | Key used for NTP broadcasts |
| 1.3.6.1.4.1.5597.3.4.2.12 | ScalarmbgLtCfgNTPBroadcastAutokey | read-write | current | Is autokey generation used for NTP broadcasts |
| 1.3.6.1.4.1.5597.3.4.2.13 | ScalarmbgLtCfgNTPAutokeyFeature | read-write | current | Is the NTP autokey feature enabled |
| 1.3.6.1.4.1.5597.3.4.2.14 | ScalarmbgLtCfgNTPAtomPPS | read-write | current | Is the NTP atom pps feature enabled |
| 1.3.6.1.4.1.5597.3.4.3 | NodembgLtCfgEMail | |||
| 1.3.6.1.4.1.5597.3.4.3.1 | ScalarmbgLtCfgEMailTo | read-write | current | EMail address to send alerts etc. to (receiving address) |
| 1.3.6.1.4.1.5597.3.4.3.2 | ScalarmbgLtCfgEMailFrom | read-write | current | EMail address to send alerts etc. from (sending address) |
| 1.3.6.1.4.1.5597.3.4.3.3 | ScalarmbgLtCfgEMailSmarthost | read-write | current | SMTP smarthost used to send mail |
| 1.3.6.1.4.1.5597.3.4.4 | NodembgLtCfgSNMP | |||
| 1.3.6.1.4.1.5597.3.4.4.1 | ScalarmbgLtCfgSNMPTrapReceiver1 | read-write | current | First SNMP trap receiver host |
| 1.3.6.1.4.1.5597.3.4.4.2 | ScalarmbgLtCfgSNMPTrapReceiver2 | read-write | current | Second SNMP trap receiver host |
| 1.3.6.1.4.1.5597.3.4.4.3 | ScalarmbgLtCfgSNMPTrapRec1Community | read-write | current | First SNMP trap receiver community |
| 1.3.6.1.4.1.5597.3.4.4.4 | ScalarmbgLtCfgSNMPTrapRec2Community | read-write | current | Second SNMP trap receiver community |
| 1.3.6.1.4.1.5597.3.4.4.5 | ScalarmbgLtCfgSNMPReadOnlyCommunity | read-write | current | SNMP community string for read-only access |
| 1.3.6.1.4.1.5597.3.4.4.6 | ScalarmbgLtCfgSNMPReadWriteCommunity | read-write | current | SNMP community string for read-write access |
| 1.3.6.1.4.1.5597.3.4.4.7 | ScalarmbgLtCfgSNMPContact | read-write | current | SNMP contact string for Lantime |
| 1.3.6.1.4.1.5597.3.4.4.8 | ScalarmbgLtCfgSNMPLocation | read-write | current | SNMP location string for Lantime |
| 1.3.6.1.4.1.5597.3.4.5 | NodembgLtCfgWinpopup | |||
| 1.3.6.1.4.1.5597.3.4.5.1 | ScalarmbgLtCfgWMailAddress1 | read-write | current | First windows popup alert receiver |
| 1.3.6.1.4.1.5597.3.4.5.2 | ScalarmbgLtCfgWMailAddress2 | read-write | current | Second windows popup alert receiver |
| 1.3.6.1.4.1.5597.3.4.6 | NodembgLtCfgWalldisplay | |||
| 1.3.6.1.4.1.5597.3.4.6.1 | ScalarmbgLtCfgVP100Display1IP | read-write | current | IP address of first VP100 wall display |
| 1.3.6.1.4.1.5597.3.4.6.2 | ScalarmbgLtCfgVP100Display1SN | read-write | current | Serial number of first VP100 wall display |
| 1.3.6.1.4.1.5597.3.4.6.3 | ScalarmbgLtCfgVP100Display2IP | read-write | current | IP address of second VP100 wall display |
| 1.3.6.1.4.1.5597.3.4.6.4 | ScalarmbgLtCfgVP100Display2SN | read-write | current | Serial number of second VP100 wall display |
| 1.3.6.1.4.1.5597.3.4.7 | NodembgLtCfgNotify | |||
| 1.3.6.1.4.1.5597.3.4.7.1 | ScalarmbgLtCfgNotifyNTPNotSync | read-write | current | Which alerts are sent in case of a NTP_not_sync event |
| 1.3.6.1.4.1.5597.3.4.7.2 | ScalarmbgLtCfgNotifyNTPStopped | read-write | current | Which alerts are sent in case of a NTP_stopped event |
| 1.3.6.1.4.1.5597.3.4.7.3 | ScalarmbgLtCfgNotifyServerBoot | read-write | current | Which alerts are sent in case of a server_boot event |
| 1.3.6.1.4.1.5597.3.4.7.4 | ScalarmbgLtCfgNotifyRefclkNoResponse | read-write | current | Which alerts are sent in case of a refclock_not_responding event |
| 1.3.6.1.4.1.5597.3.4.7.5 | ScalarmbgLtCfgNotifyRefclockNotSync | read-write | current | Which alerts are sent in case of a refclock_not_sync event |
| 1.3.6.1.4.1.5597.3.4.7.6 | ScalarmbgLtCfgNotifyAntennaFaulty | read-write | current | Which alerts are sent in case of an antenna_faulty event |
| 1.3.6.1.4.1.5597.3.4.7.7 | ScalarmbgLtCfgNotifyAntennaReconnect | read-write | current | Which alerts are sent in case of an antenna_reconnect event |
| 1.3.6.1.4.1.5597.3.4.7.8 | ScalarmbgLtCfgNotifyConfigChanged | read-write | current | Which alerts are sent in case of a config_changed event |
| 1.3.6.1.4.1.5597.3.4.7.9 | ScalarmbgLtCfgNotifySHSTimeLimitError | read-write | current | Which alerts are sent in case of a SHS_timelimiterror event |
| 1.3.6.1.4.1.5597.3.4.7.10 | ScalarmbgLtCfgNotifyLeapSecond | read-write | current | Which alerts are sent in case of a Leap_Second_Announced event |
| 1.3.6.1.4.1.5597.3.4.8 | NodembgLtCfgEthernet | |||
| 1.3.6.1.4.1.5597.3.4.8.0 | NodembgLtCfgEthernetIf0 | |||
| 1.3.6.1.4.1.5597.3.4.8.0.1 | ScalarmbgLtCfgEthernetIf0IPv4IP | read-write | current | The IPv4 address of the first ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.0.2 | ScalarmbgLtCfgEthernetIf0IPv4Netmask | read-write | current | The IPv4 netmask of the first ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.0.3 | ScalarmbgLtCfgEthernetIf0IPv4Gateway | read-write | current | The IPv4 gateway address of the first ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.0.4 | ScalarmbgLtCfgEthernetIf0DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.0.5 | ScalarmbgLtCfgEthernetIf0IPv6IP1 | read-write | current | The first IPv6 address of the first ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.0.6 | ScalarmbgLtCfgEthernetIf0IPv6IP2 | read-write | current | The second IPv6 address of the first ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.0.7 | ScalarmbgLtCfgEthernetIf0IPv6IP3 | read-write | current | The third IPv6 address of the first ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.0.8 | ScalarmbgLtCfgEthernetIf0IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.0.9 | ScalarmbgLtCfgEthernetIf0NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.1 | NodembgLtCfgEthernetIf1 | |||
| 1.3.6.1.4.1.5597.3.4.8.1.1 | ScalarmbgLtCfgEthernetIf1IPv4IP | read-write | current | The IPv4 address of the second ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.1.2 | ScalarmbgLtCfgEthernetIf1IPv4Netmask | read-write | current | The IPv4 netmask of the second ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.1.3 | ScalarmbgLtCfgEthernetIf1IPv4Gateway | read-write | current | The IPv4 gateway address of the second ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.1.4 | ScalarmbgLtCfgEthernetIf1DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.1.5 | ScalarmbgLtCfgEthernetIf1IPv6IP1 | read-write | current | The first IPv6 address of the second ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.1.6 | ScalarmbgLtCfgEthernetIf1IPv6IP2 | read-write | current | The second IPv6 address of the second ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.1.7 | ScalarmbgLtCfgEthernetIf1IPv6IP3 | read-write | current | The third IPv6 address of the second ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.1.8 | ScalarmbgLtCfgEthernetIf1IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.1.9 | ScalarmbgLtCfgEthernetIf1NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.2 | NodembgLtCfgEthernetIf2 | |||
| 1.3.6.1.4.1.5597.3.4.8.2.1 | ScalarmbgLtCfgEthernetIf2IPv4IP | read-write | current | The IPv4 address of the third ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.2.2 | ScalarmbgLtCfgEthernetIf2IPv4Netmask | read-write | current | The IPv4 netmask of the third ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.2.3 | ScalarmbgLtCfgEthernetIf2IPv4Gateway | read-write | current | The IPv4 gateway address of the third ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.2.4 | ScalarmbgLtCfgEthernetIf2DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.2.5 | ScalarmbgLtCfgEthernetIf2IPv6IP1 | read-write | current | The first IPv6 address of the third ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.2.6 | ScalarmbgLtCfgEthernetIf2IPv6IP2 | read-write | current | The second IPv6 address of the third ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.2.7 | ScalarmbgLtCfgEthernetIf2IPv6IP3 | read-write | current | The third IPv6 address of the third ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.2.8 | ScalarmbgLtCfgEthernetIf2IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.2.9 | ScalarmbgLtCfgEthernetIf2NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.3 | NodembgLtCfgEthernetIf3 | |||
| 1.3.6.1.4.1.5597.3.4.8.3.1 | ScalarmbgLtCfgEthernetIf3IPv4IP | read-write | current | The IPv4 address of the fourth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.3.2 | ScalarmbgLtCfgEthernetIf3IPv4Netmask | read-write | current | The IPv4 netmask of the fourth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.3.3 | ScalarmbgLtCfgEthernetIf3IPv4Gateway | read-write | current | The IPv4 gateway address of the fourth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.3.4 | ScalarmbgLtCfgEthernetIf3DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.3.5 | ScalarmbgLtCfgEthernetIf3IPv6IP1 | read-write | current | The first IPv6 address of the fourth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.3.6 | ScalarmbgLtCfgEthernetIf3IPv6IP2 | read-write | current | The second IPv6 address of the fourth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.3.7 | ScalarmbgLtCfgEthernetIf3IPv6IP3 | read-write | current | The third IPv6 address of the fourth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.3.8 | ScalarmbgLtCfgEthernetIf3IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.3.9 | ScalarmbgLtCfgEthernetIf3NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.4 | NodembgLtCfgEthernetIf4 | |||
| 1.3.6.1.4.1.5597.3.4.8.4.1 | ScalarmbgLtCfgEthernetIf4IPv4IP | read-write | current | The IPv4 address of the fifth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.4.2 | ScalarmbgLtCfgEthernetIf4IPv4Netmask | read-write | current | The IPv4 netmask of the fifth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.4.3 | ScalarmbgLtCfgEthernetIf4IPv4Gateway | read-write | current | The IPv4 gateway address of the fifth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.4.4 | ScalarmbgLtCfgEthernetIf4DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.4.5 | ScalarmbgLtCfgEthernetIf4IPv6IP1 | read-write | current | The first IPv6 address of the fifth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.4.6 | ScalarmbgLtCfgEthernetIf4IPv6IP2 | read-write | current | The second IPv6 address of the fifth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.4.7 | ScalarmbgLtCfgEthernetIf4IPv6IP3 | read-write | current | The third IPv6 address of the fifth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.4.8 | ScalarmbgLtCfgEthernetIf4IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.4.9 | ScalarmbgLtCfgEthernetIf4NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.5 | NodembgLtCfgEthernetIf5 | |||
| 1.3.6.1.4.1.5597.3.4.8.5.1 | ScalarmbgLtCfgEthernetIf5IPv4IP | read-write | current | The IPv4 address of the sixth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.5.2 | ScalarmbgLtCfgEthernetIf5IPv4Netmask | read-write | current | The IPv4 netmask of the sixth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.5.3 | ScalarmbgLtCfgEthernetIf5IPv4Gateway | read-write | current | The IPv4 gateway address of the sixth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.5.4 | ScalarmbgLtCfgEthernetIf5DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.5.5 | ScalarmbgLtCfgEthernetIf5IPv6IP1 | read-write | current | The first IPv6 address of the sixth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.5.6 | ScalarmbgLtCfgEthernetIf5IPv6IP2 | read-write | current | The second IPv6 address of the sixth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.5.7 | ScalarmbgLtCfgEthernetIf5IPv6IP3 | read-write | current | The third IPv6 address of the sixth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.5.8 | ScalarmbgLtCfgEthernetIf5IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.5.9 | ScalarmbgLtCfgEthernetIf5NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.6 | NodembgLtCfgEthernetIf6 | |||
| 1.3.6.1.4.1.5597.3.4.8.6.1 | ScalarmbgLtCfgEthernetIf6IPv4IP | read-write | current | The IPv4 address of the seventh ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.6.2 | ScalarmbgLtCfgEthernetIf6IPv4Netmask | read-write | current | The IPv4 netmask of the seventh ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.6.3 | ScalarmbgLtCfgEthernetIf6IPv4Gateway | read-write | current | The IPv4 gateway address of the seventh ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.6.4 | ScalarmbgLtCfgEthernetIf6DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.6.5 | ScalarmbgLtCfgEthernetIf6IPv6IP1 | read-write | current | The first IPv6 address of the seventh ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.6.6 | ScalarmbgLtCfgEthernetIf6IPv6IP2 | read-write | current | The second IPv6 address of the seventh ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.6.7 | ScalarmbgLtCfgEthernetIf6IPv6IP3 | read-write | current | The third IPv6 address of the seventh ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.6.8 | ScalarmbgLtCfgEthernetIf6IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.6.9 | ScalarmbgLtCfgEthernetIf6NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.7 | NodembgLtCfgEthernetIf7 | |||
| 1.3.6.1.4.1.5597.3.4.8.7.1 | ScalarmbgLtCfgEthernetIf7IPv4IP | read-write | current | The IPv4 address of the eighth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.7.2 | ScalarmbgLtCfgEthernetIf7IPv4Netmask | read-write | current | The IPv4 netmask of the eighth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.7.3 | ScalarmbgLtCfgEthernetIf7IPv4Gateway | read-write | current | The IPv4 gateway address of the eighth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.7.4 | ScalarmbgLtCfgEthernetIf7DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.7.5 | ScalarmbgLtCfgEthernetIf7IPv6IP1 | read-write | current | The first IPv6 address of the eighth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.7.6 | ScalarmbgLtCfgEthernetIf7IPv6IP2 | read-write | current | The second IPv6 address of the eighth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.7.7 | ScalarmbgLtCfgEthernetIf7IPv6IP3 | read-write | current | The third IPv6 address of the eighth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.7.8 | ScalarmbgLtCfgEthernetIf7IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.7.9 | ScalarmbgLtCfgEthernetIf7NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.8 | NodembgLtCfgEthernetIf8 | |||
| 1.3.6.1.4.1.5597.3.4.8.8.1 | ScalarmbgLtCfgEthernetIf8IPv4IP | read-write | current | The IPv4 address of the nineth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.8.2 | ScalarmbgLtCfgEthernetIf8IPv4Netmask | read-write | current | The IPv4 netmask of the nineth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.8.3 | ScalarmbgLtCfgEthernetIf8IPv4Gateway | read-write | current | The IPv4 gateway address of the nineth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.8.4 | ScalarmbgLtCfgEthernetIf8DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.8.5 | ScalarmbgLtCfgEthernetIf8IPv6IP1 | read-write | current | The first IPv6 address of the nineth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.8.6 | ScalarmbgLtCfgEthernetIf8IPv6IP2 | read-write | current | The second IPv6 address of the nineth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.8.7 | ScalarmbgLtCfgEthernetIf8IPv6IP3 | read-write | current | The third IPv6 address of the nineth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.8.8 | ScalarmbgLtCfgEthernetIf8IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.8.9 | ScalarmbgLtCfgEthernetIf8NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.8.9 | NodembgLtCfgEthernetIf9 | |||
| 1.3.6.1.4.1.5597.3.4.8.9.1 | ScalarmbgLtCfgEthernetIf9IPv4IP | read-write | current | The IPv4 address of the tenth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.9.2 | ScalarmbgLtCfgEthernetIf9IPv4Netmask | read-write | current | The IPv4 netmask of the tenth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.9.3 | ScalarmbgLtCfgEthernetIf9IPv4Gateway | read-write | current | The IPv4 gateway address of the tenth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.9.4 | ScalarmbgLtCfgEthernetIf9DHCPClient | read-write | current | Is DHCP used to get IP parameters for this interface |
| 1.3.6.1.4.1.5597.3.4.8.9.5 | ScalarmbgLtCfgEthernetIf9IPv6IP1 | read-write | current | The first IPv6 address of the tenth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.9.6 | ScalarmbgLtCfgEthernetIf9IPv6IP2 | read-write | current | The second IPv6 address of the tenth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.9.7 | ScalarmbgLtCfgEthernetIf9IPv6IP3 | read-write | current | The third IPv6 address of the tenth ethernet interface |
| 1.3.6.1.4.1.5597.3.4.8.9.8 | ScalarmbgLtCfgEthernetIf9IPv6Autoconf | read-write | current | Is IPv6 Autoconf used for this interface |
| 1.3.6.1.4.1.5597.3.4.8.9.9 | ScalarmbgLtCfgEthernetIf9NetLinkMode | read-write | current | Link mode for this interface |
| 1.3.6.1.4.1.5597.3.4.9 | NodembgLtCfgSHS | |||
| 1.3.6.1.4.1.5597.3.4.9.1 | ScalarmbgLtCfgSHSCritLimit | read-write | current | Max. number of milliseconds the two SHS references can differ before a SHS Critical Timelimit error is issued |
| 1.3.6.1.4.1.5597.3.4.9.2 | ScalarmbgLtCfgSHSWarnLimit | read-write | current | Max. number of milliseconds the two SHS references can differ before a SHS Warning Timelimit error is issued |
| 1.3.6.1.4.1.5597.3.4.10 | NodembgLtCfgMRS | |||
| 1.3.6.1.4.1.5597.3.4.10.1 | ScalarmbgLtCfgMRSRefPriority | read-write | current | Priority of MRS Reference Sources, as a comma-separated list |
| 1.3.6.1.4.1.5597.3.5 | NodembgLtCmd | |||
| 1.3.6.1.4.1.5597.3.5.1 | ScalarmbgLtCmdExecute | read-write | current | Send a command to the timeserver to be executed |
| 1.3.6.1.4.1.5597.3.5.2 | ScalarmbgLtCmdSetRefTime | read-write | current | Set the time of the reference clock and the LANTIME itself |
| 1.3.6.1.4.1.5597.3.10 | NodembgLtPtp | |||
| 1.3.6.1.4.1.5597.3.10.1 | ScalarmbgLtPtpMode | read-only | current | Display current PTPv2 modus as string |
| 1.3.6.1.4.1.5597.3.10.2 | ScalarmbgLtPtpModeVal | read-only | current | Display current PTPv2 modus as integer |
| 1.3.6.1.4.1.5597.3.10.3 | ScalarmbgLtPtpPortState | read-only | current | Current PTPv2 port state as string |
| 1.3.6.1.4.1.5597.3.10.4 | ScalarmbgLtPtpPortStateVal | read-only | current | Current PTPv2 port state as integer |
| 1.3.6.1.4.1.5597.3.10.5 | ScalarmbgLtPtpOffsetFromGM | read-only | current | Current PTPv2 offset from grandmaster as string |
| 1.3.6.1.4.1.5597.3.10.6 | ScalarmbgLtPtpOffsetFromGMVal | read-only | current | Current PTPv2 offset from grandmaster in nanoseconds |
| 1.3.6.1.4.1.5597.3.10.7 | ScalarmbgLtPtpDelay | read-only | current | shows the current network delay in nanoseconds as string |
| 1.3.6.1.4.1.5597.3.10.8 | ScalarmbgLtPtpDelayVal | read-only | current | shows the current network delay in nanoseconds |
| 1.3.6.1.4.1.5597.3.11 | NodembgLtFdm | |||
| 1.3.6.1.4.1.5597.3.11.1 | ScalarmbgLtFdmPlFreq | read-only | current | shows the current powerline frequency in mHz as an Integer32 value |
| 1.3.6.1.4.1.5597.3.11.2 | ScalarmbgLtFdmFreqDev | read-only | current | shows the current frequency deviation in mHz as an Integer32 value |
| 1.3.6.1.4.1.5597.3.11.3 | ScalarmbgLtFdmNomFreq | read-only | current | shows the nominal frequency in mHz as an Integer32 value |
| 1.3.6.1.4.1.5597.3.90 | NodembgLtConformance | |||
| 1.3.6.1.4.1.5597.3.90.1 | NodembgLtCompliances | |||
| 1.3.6.1.4.1.5597.3.90.1.1 | CompliancembgLtCompliance | current | The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB | |
| 1.3.6.1.4.1.5597.3.90.2 | NodembgLtGroups | |||
| 1.3.6.1.4.1.5597.3.90.2.1 | GroupmbgLtObjectsGroup | current | The collection of objects for the LANTIME MIB | |
| 1.3.6.1.4.1.5597.3.90.2.2 | GroupmbgLtTrapsGroup | current | The collection of traps for the LANTIME MIB |