MIB Viewer

MBG-SNMP-LTNG-MIB

446 objects
Meinberg LANTIME SNMP Management Information Base
Imported Objects
MBG-SNMP-ROOT-MIBmbgSnmpRoot MeinbergSwitch
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-MIBsnmpTrapEnterprise sysName
SNMPv2-SMICounter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.5597.30IdentitymbgLantimeNGMeinberg LANTIME SNMP Management Information Base
1.3.6.1.4.1.5597.30.0NodembgLantimeNGStatus
1.3.6.1.4.1.5597.30.0.0NodembgLtNgInfo
1.3.6.1.4.1.5597.30.0.0.1ScalarmbgLtNgSnmpSubagentVersionread-onlycurrentversion of this SNMP subagent
1.3.6.1.4.1.5597.30.0.0.2ScalarmbgLtNgFirmwareVersionread-onlycurrentinstalled LANTIME firmware version
1.3.6.1.4.1.5597.30.0.0.3ScalarmbgLtNgSerialNumberread-onlycurrentLANTIME serial number
1.3.6.1.4.1.5597.30.0.0.4ScalarmbgLtNgSubagentTimeticksread-onlycurrentSubdaemons' time alive in seconds
1.3.6.1.4.1.5597.30.0.0.5ScalarmbgLtNgCpuSerialNumberread-onlycurrentCPU's serial number
1.3.6.1.4.1.5597.30.0.1NodembgLtNgRefclock
1.3.6.1.4.1.5597.30.0.1.1ScalarmbgLtNgNumberOfRefclocksread-onlycurrentcurrently installed number of refclocks
1.3.6.1.4.1.5597.30.0.1.2TablembgLtNgRefclockTablenot-accessiblecurrenta table of refclock related variables
1.3.6.1.4.1.5597.30.0.1.2.1RowmbgLtNgRefclockTableEntrynot-accessiblecurrenta list of objects pertaining to a refclock
1.3.6.1.4.1.5597.30.0.1.2.1.1ColumnmbgLtNgRefclockIndexnot-accessiblecurrentindex for refclock
1.3.6.1.4.1.5597.30.0.1.2.1.2ColumnmbgLtNgRefclockTyperead-onlycurrenttype of refclock
1.3.6.1.4.1.5597.30.0.1.2.1.3ColumnmbgLtNgRefclockUsageread-onlycurrentwhat this refclock is used for
1.3.6.1.4.1.5597.30.0.1.2.1.4ColumnmbgLtNgRefclockStateread-onlycurrentstate of GPS refclock conneted to NTP time server as value 0: not available 1: synchronized 2: not synchronized
1.3.6.1.4.1.5597.30.0.1.2.1.5ColumnmbgLtNgRefclockSubstateread-onlycurrentmore detailed state depending on refclock type 0: no substate available gps: 1-4 long waves (PZF,WWVB,MSF,...): 50-52 (not supported by all types) irig: 100-101
1.3.6.1.4.1.5597.30.0.1.2.1.6ColumnmbgLtNgRefclockStatusAread-onlycurrentstatus A depending on reflcock gps : indicates number of good satellites in view long wave - pzf : correlation - other : not supported irig : not supported
1.3.6.1.4.1.5597.30.0.1.2.1.7ColumnmbgLtNgRefclockMaxStatusAread-onlycurrentmaximum status A depending on reflcock gps : indicates number of satellites in view long wave - pzf : 100 - other : not supported irig : not supported
1.3.6.1.4.1.5597.30.0.1.2.1.8ColumnmbgLtNgRefclockStatusBread-onlycurrentmaximum status B depending on reflcock gps : not supported long wave - all : field strength irig : not supported
1.3.6.1.4.1.5597.30.0.1.2.1.9ColumnmbgLtNgRefclockMaxStatusBread-onlycurrentmaximum status B depending on reflcock gps : not supported long wave - all : 100 irig : not supported
1.3.6.1.4.1.5597.30.0.1.2.1.10ColumnmbgLtNgRefclockAdditionalInforead-onlycurrentany kind of additional information concerning a refclock
1.3.6.1.4.1.5597.30.0.1.2.1.11ColumnmbgLtNgRefclockLeapSecondDateread-onlycurrentDate for next leap second
1.3.6.1.4.1.5597.30.0.1.3TablembgLtNgRefclockGpsTablenot-accessiblecurrenta table of gps only related variables
1.3.6.1.4.1.5597.30.0.1.3.1RowmbgLtNgRefclockGpsTableEntrynot-accessiblecurrenta list of objects pertaining to a GPS refclock
1.3.6.1.4.1.5597.30.0.1.3.1.1ColumnmbgLtNgRefclockGpsIndexnot-accessiblecurrentindex for GPS
1.3.6.1.4.1.5597.30.0.1.3.1.2ColumnmbgLtNgRefclockGpsLatituderead-onlycurrentGPS' latitude
1.3.6.1.4.1.5597.30.0.1.3.1.3ColumnmbgLtNgRefclockGpsLongituderead-onlycurrentGPS' longitude
1.3.6.1.4.1.5597.30.0.1.3.1.4ColumnmbgLtNgRefclockGpsAltituderead-onlycurrentGPS' altitude
1.3.6.1.4.1.5597.30.0.1.3.1.5ColumnmbgLtNgRefclockGpsTdopread-onlycurrentGPS' timing dillution of precision
1.3.6.1.4.1.5597.30.0.1.3.1.6ColumnmbgLtNgRefclockGpsPdopread-onlycurrentGPS' positional dillution of precision
1.3.6.1.4.1.5597.30.0.1.3.1.7ColumnmbgLtNgRefclockGpsUtcOffsetread-onlycurrentGPS' offset to UTC in seconds
1.3.6.1.4.1.5597.30.0.1.4ScalarmbgLtNgRefclockTimeDiffread-onlycurrentwhen there is more than one refclock this object shows the internal time difference in nanoseconds
1.3.6.1.4.1.5597.30.0.1.5ScalarmbgLtNgRefclockGpsPosread-onlycurrentshows current GPS receiver position
1.3.6.1.4.1.5597.30.0.1.6TablembgLtNgRefclockMrsInfonot-accessiblecurrenta table of MRS related variables
1.3.6.1.4.1.5597.30.0.1.6.1RowmbgLtNgRefclockMrsTableEntrynot-accessiblecurrenta list of objects pertaining to a MRS refclock
1.3.6.1.4.1.5597.30.0.1.6.1.1ColumnmbgLtNgRefclockXmrSyncToread-onlycurrentcurrent XMR priority synced to
1.3.6.1.4.1.5597.30.0.1.6.1.2ColumnmbgLtNgRefclockXmrPriority1read-onlycurrentXMR Priority 1
1.3.6.1.4.1.5597.30.0.1.6.1.3ColumnmbgLtNgRefclockXmrPriority2read-onlycurrentXMR Priority 2
1.3.6.1.4.1.5597.30.0.1.6.1.4ColumnmbgLtNgRefclockXmrPriority3read-onlycurrentXMR Priority 3
1.3.6.1.4.1.5597.30.0.1.6.1.5ColumnmbgLtNgRefclockXmrPriority4read-onlycurrentXMR Priority 4
1.3.6.1.4.1.5597.30.0.1.6.1.6ColumnmbgLtNgRefclockXmrPriority5read-onlycurrentXMR Priority 5
1.3.6.1.4.1.5597.30.0.1.6.1.7ColumnmbgLtNgRefclockXmrPriority6read-onlycurrentXMR Priority 6
1.3.6.1.4.1.5597.30.0.1.6.1.8ColumnmbgLtNgRefclockXmrPriority7read-onlycurrentXMR Priority 7
1.3.6.1.4.1.5597.30.0.1.6.1.9ColumnmbgLtNgRefclockXmrPriority8read-onlycurrentXMR Priority 8
1.3.6.1.4.1.5597.30.0.1.6.1.10ColumnmbgLtNgRefclockXmrPriority9read-onlycurrentXMR Priority 9
1.3.6.1.4.1.5597.30.0.1.6.1.11ColumnmbgLtNgRefclockXmrPriority10read-onlycurrentXMR Priority 10
1.3.6.1.4.1.5597.30.0.2NodembgLtNgNtp
1.3.6.1.4.1.5597.30.0.2.1ScalarmbgLtNgNtpCurrentStateread-onlycurrentCurrent NTP's synchronization status
1.3.6.1.4.1.5597.30.0.2.2ScalarmbgLtNgNtpStratumread-onlycurrentStratum value of the NTP
1.3.6.1.4.1.5597.30.0.2.3ScalarmbgLtNgNtpRefclockNameread-onlycurrentName of the current refclock selected by the NTP
1.3.6.1.4.1.5597.30.0.2.4ScalarmbgLtNgNtpRefclockOffsetread-onlycurrentTime offset between the current selected refclock and time of NTP as string in milliseconds
1.3.6.1.4.1.5597.30.0.2.5ScalarmbgLtNgNtpVersionread-onlycurrentintegrated NTP version
1.3.6.1.4.1.5597.30.0.2.8NodembgLtNgNtpClientCounter
1.3.6.1.4.1.5597.30.0.2.8.1ScalarmbgLtNgNtpCCStartedAtread-onlycurrentstart time of current NTP client counter session as timestamp
1.3.6.1.4.1.5597.30.0.2.8.2ScalarmbgLtNgNtpCCDurationread-onlycurrenttotal duration of NTP client counter in seconds
1.3.6.1.4.1.5597.30.0.2.8.3ScalarmbgLtNgNtpCCNumberOfClientsread-onlycurrenttotal number of different clients requesting time
1.3.6.1.4.1.5597.30.0.2.8.4ScalarmbgLtNgNtpCCTotalRequestsread-onlyobsoletetotal requests since starting the daemon
1.3.6.1.4.1.5597.30.0.2.8.5ScalarmbgLtNgNtpCCTotalRequestsCurrentDayread-onlycurrenttoday's total requests
1.3.6.1.4.1.5597.30.0.2.8.6ScalarmbgLtNgNtpCCTotalRequestsLastHourread-onlycurrenttoday's requests within the last completed hour
1.3.6.1.4.1.5597.30.0.2.8.7ScalarmbgLtNgNtpCCTotalRequestsLastMinuteread-onlycurrenttoday's requests within the last completed minute
1.3.6.1.4.1.5597.30.0.2.8.8ScalarmbgLtNgNtpCCTodaysClientsread-onlycurrenttoday's number of different clients requesting time
1.3.6.1.4.1.5597.30.0.2.9NodembgLtNgNtpMrs
1.3.6.1.4.1.5597.30.0.2.9.1ScalarmbgLtNgNtpMrsServerread-onlycurrentexternal NTP server being used for synchronization
1.3.6.1.4.1.5597.30.0.2.9.2ScalarmbgLtNgNtpMrsOffsetread-onlycurrentexternal NTP server's offset
1.3.6.1.4.1.5597.30.0.3NodembgLtNgPtp
1.3.6.1.4.1.5597.30.0.3.1ScalarmbgLtNgPtpNumberOfModulesread-onlycurrentnumber of available PTPv2 modules
1.3.6.1.4.1.5597.30.0.3.2TablembgLtNgPtpTablenot-accessiblecurrenta table of PTPv2 related variables
1.3.6.1.4.1.5597.30.0.3.2.1RowmbgLtNgPtpTableEntrynot-accessiblecurrenta list of objects pertaining to a PTPv2 module
1.3.6.1.4.1.5597.30.0.3.2.1.1ColumnmbgLtNgPtpIndexnot-accessiblecurrentindex for PTPv2 module
1.3.6.1.4.1.5597.30.0.3.2.1.2ColumnmbgLtNgPtpModeread-onlyobsoletePTPv2 modus as integer. This object is obsolete and always returns '0'. Please see alternates mbgLtNgPtpPortState and mbgLtNgPtpRole.
1.3.6.1.4.1.5597.30.0.3.2.1.3ColumnmbgLtNgPtpPortStateread-onlycurrentport state as integer
1.3.6.1.4.1.5597.30.0.3.2.1.4ColumnmbgLtNgPtpGrandmasterMacread-onlycurrentMAC address of current grandmaster
1.3.6.1.4.1.5597.30.0.3.2.1.5ColumnmbgLtNgPtpClockAccuracyread-onlycurrentindicates the source of time
1.3.6.1.4.1.5597.30.0.3.2.1.6ColumnmbgLtNgPtpClockClassread-onlycurrentdenotes the traceability of the time or frequency
1.3.6.1.4.1.5597.30.0.3.2.1.7ColumnmbgLtNgPtpTimeSourceread-onlycurrentsource of time being used
1.3.6.1.4.1.5597.30.0.3.2.1.8ColumnmbgLtNgPtpUtcOffsetread-onlycurrentoffset from PTP's TAI time to UTC time
1.3.6.1.4.1.5597.30.0.3.2.1.9ColumnmbgLtNgPtpTimeSecondsread-onlycurrentPTP seconds
1.3.6.1.4.1.5597.30.0.3.2.1.10ColumnmbgLtNgPtpTsuTimeread-onlycurrentcurrent time on PTP TSU
1.3.6.1.4.1.5597.30.0.3.2.1.11ColumnmbgLtNgPtpSysTimeread-onlycurrentcurrent system time
1.3.6.1.4.1.5597.30.0.3.2.1.12ColumnmbgLtNgPtpPortLinkupread-onlycurrentPTP port's physical link-up
1.3.6.1.4.1.5597.30.0.3.2.1.13ColumnmbgLtNgPtpOffsetFromGMread-onlycurrentoffset from grandmaster in nanoseconds
1.3.6.1.4.1.5597.30.0.3.2.1.14ColumnmbgLtNgPtpPathDelayread-onlycurrentnetwork delay in nanoseconds
1.3.6.1.4.1.5597.30.0.3.2.1.15ColumnmbgLtNgPtpDelayMecread-onlycurrentdelay mechanism
1.3.6.1.4.1.5597.30.0.3.2.1.16ColumnmbgLtNgPtpDomainread-onlycurrentdomain number
1.3.6.1.4.1.5597.30.0.3.2.1.17ColumnmbgLtNgPtpGrandmasterUuidread-onlycurrentgrandmaster uuid
1.3.6.1.4.1.5597.30.0.3.2.1.18ColumnmbgLtNgPtpLocalMacread-onlycurrentlocal MAC address
1.3.6.1.4.1.5597.30.0.3.2.1.19ColumnmbgLtNgPtpDelayAsymmetryread-onlycurrentasymmetric network delay in nanoseconds
1.3.6.1.4.1.5597.30.0.3.2.1.20ColumnmbgLtNgPtpAvailread-onlycurrentSignals whether PTP instance is avail or not
1.3.6.1.4.1.5597.30.0.4NodembgLtNgFdm
1.3.6.1.4.1.5597.30.0.4.1ScalarmbgLtNgFdmFreqread-onlycurrentpowerline frequency in mHz; 0 indicates that no data is available
1.3.6.1.4.1.5597.30.0.4.2ScalarmbgLtNgFdmFreqDevread-onlycurrentfrequency deviation in mHz depending on the configured nominal frequency; check 'mbgLtNgFdmFreq' for error
1.3.6.1.4.1.5597.30.0.4.3ScalarmbgLtNgFdmNomFreqread-onlycurrentnominal frequency in mHz; can be 50000 (50Hz) or 60000 (60Hz); 0 indicates that no value is configured
1.3.6.1.4.1.5597.30.0.5NodembgLtNgSystemHardware
1.3.6.1.4.1.5597.30.0.5.0NodembgLtNgSysPowerSupply
1.3.6.1.4.1.5597.30.0.5.0.1ScalarmbgLtNgSysNumberOfPowerSuppliesread-onlycurrentnumber of available power supplies
1.3.6.1.4.1.5597.30.0.5.0.2TablembgLtNgSysPsTablenot-accessiblecurrenta table of power supply stati
1.3.6.1.4.1.5597.30.0.5.0.2.1RowmbgLtNgSysPsTableEntrynot-accessiblecurrenta list of objects pertaining to power supplies
1.3.6.1.4.1.5597.30.0.5.0.2.1.1ColumnmbgLtNgSysPsIndexnot-accessiblecurrentindex of power supply
1.3.6.1.4.1.5597.30.0.5.0.2.1.2ColumnmbgLtNgSysPsStatusread-onlycurrentStatus of power supply
1.3.6.1.4.1.5597.30.0.5.1NodembgLtNgSysFan
1.3.6.1.4.1.5597.30.0.5.1.1ScalarmbgLtNgSysNumberOfFansread-onlycurrentnumber of available fans
1.3.6.1.4.1.5597.30.0.5.1.2TablembgLtNgSysFanTablenot-accessiblecurrenta table of power supply stati
1.3.6.1.4.1.5597.30.0.5.1.2.1RowmbgLtNgSysFanTableEntrynot-accessiblecurrenta list of objects pertaining to fans
1.3.6.1.4.1.5597.30.0.5.1.2.1.1ColumnmbgLtNgSysFanIndexnot-accessiblecurrentindex of fan
1.3.6.1.4.1.5597.30.0.5.1.2.1.2ColumnmbgLtNgSysFanStatusread-onlycurrentStatus of fan
1.3.6.1.4.1.5597.30.0.5.1.2.1.3ColumnmbgLtNgSysFanErrorread-onlycurrentfan's error field
1.3.6.1.4.1.5597.30.0.5.2NodembgLtNgSysTemperature
1.3.6.1.4.1.5597.30.0.5.2.1ScalarmbgLtNgSysTempCelsiusread-onlycurrenttemperature in degree Celsius
1.3.6.1.4.1.5597.30.0.6NodembgLtNgCluster
1.3.6.1.4.1.5597.30.0.6.1ScalarmbgLtNgNumberOfClustersread-onlycurrentnumber of active running clusters
1.3.6.1.4.1.5597.30.0.6.2TablembgLtNgClusterTablenot-accessiblecurrenta table of cluster status information
1.3.6.1.4.1.5597.30.0.6.2.1RowmbgLtNgClusterTableEntrynot-accessiblecurrenta list of objects pertaining to running and active clusters
1.3.6.1.4.1.5597.30.0.6.2.1.1ColumnmbgLtNgClusterIndexnot-accessiblecurrentindex of power supply
1.3.6.1.4.1.5597.30.0.6.2.1.2ColumnmbgLtNgClusterCommunicationIpread-onlycurrentip of cluster interface
1.3.6.1.4.1.5597.30.0.6.2.1.3ColumnmbgLtNgClusterPortStateread-onlycurrentstate of cluster
1.3.6.1.4.1.5597.30.0.6.2.1.4ColumnmbgLtNgClusterMasterSerialread-onlycurrentserial number of cluster's master
1.3.6.1.4.1.5597.30.0.6.2.1.5ColumnmbgLtNgClusterMasterIpread-onlycurrentip address of cluster's master
1.3.6.1.4.1.5597.30.0.6.2.1.6ColumnmbgLtNgClusterMasterPriorityread-onlycurrentpriority of cluster master
1.3.6.1.4.1.5597.30.0.6.2.1.7ColumnmbgLtNgClusterClockClassread-onlycurrentreference's clock class
1.3.6.1.4.1.5597.30.0.6.2.1.8ColumnmbgLtNgClusterClockStatusread-onlycurrentreference's clock status
1.3.6.1.4.1.5597.30.0.6.2.1.9ColumnmbgLtNgClusterReconfigurationStateread-onlycurrentcurrent reconfiguration state
1.3.6.1.4.1.5597.30.0.6.2.1.10ColumnmbgLtNgClusterIsFalsetickerread-onlycurrentam I a falseticker?
1.3.6.1.4.1.5597.30.0.7NodembgLtNgMisc
1.3.6.1.4.1.5597.30.0.7.1TablembgLtNgEthPortLinkTablenot-accessiblecurrenta table of physical ethernet interface port link states
1.3.6.1.4.1.5597.30.0.7.1.1RowmbgLtNgEthPortLinkTableEntrynot-accessiblecurrentport link states for each physical ethernet interface
1.3.6.1.4.1.5597.30.0.7.1.1.1ColumnmbgLtNgEthPortLinkIndexnot-accessiblecurrentinterface index
1.3.6.1.4.1.5597.30.0.7.1.1.2ColumnmbgLtNgEthPortLinkStateread-onlycurrentlink state
1.3.6.1.4.1.5597.30.1NodembgLtNgConfig
1.3.6.1.4.1.5597.30.1.0NodembgLtNgCfgEthernet
1.3.6.1.4.1.5597.30.1.0.1ScalarmbgLtNgCfgEthernetHostnameread-writecurrentdevices' hostname
1.3.6.1.4.1.5597.30.1.0.2ScalarmbgLtNgCfgEthernetDomainread-writecurrentdevices' domain membership
1.3.6.1.4.1.5597.30.1.0.3ScalarmbgLtNgCfgEthernetNameserver1read-writecurrentfirst nameserver's ip address
1.3.6.1.4.1.5597.30.1.0.4ScalarmbgLtNgCfgEthernetNameserver2read-writecurrentsecond nameserver's ip address
1.3.6.1.4.1.5597.30.1.0.5ScalarmbgLtNgCfgEthernetIpv4Gatewayread-writecurrentdevice's ethernet ipv4 gateway
1.3.6.1.4.1.5597.30.1.0.6ScalarmbgLtNgCfgEthernetIpv6Gatewayread-writecurrentdevice's ethernet ipv6 gateway
1.3.6.1.4.1.5597.30.1.0.7ScalarmbgLtNgCfgNumberOfPhysicalIfread-onlycurrentnumber of virtual interfaces interfaces
1.3.6.1.4.1.5597.30.1.0.8ScalarmbgLtNgCfgNumberOfVirtualIfread-onlycurrentnumber of virtual interfaces interfaces
1.3.6.1.4.1.5597.30.1.0.9TablembgLtNgCfgPhysicalIfTablenot-accessiblecurrenta table of service stati for the ethernet interfaces
1.3.6.1.4.1.5597.30.1.0.9.1RowmbgLtNgCfgPhysicalIfTableEntrynot-accessiblecurrenta list of objects pertaining to a mrs input reference
1.3.6.1.4.1.5597.30.1.0.9.1.1ColumnmbgLtNgCfgPhysicalIfIndexnot-accessiblecurrentspecifies the physical interface index
1.3.6.1.4.1.5597.30.1.0.9.1.2ColumnmbgLtNgCfgPhysicalIfMacread-onlycurrentinterface's physical MAC address
1.3.6.1.4.1.5597.30.1.0.9.1.3ColumnmbgLtNgCfgPhysicalIfNetLinkModeread-writecurrentinterface's net link mode; hd = half-duplex; fd = full-duplex
1.3.6.1.4.1.5597.30.1.0.9.1.4ColumnmbgLtNgCfgPhysicalIfIndicateLinkread-writecurrentindicate link via front panel LED
1.3.6.1.4.1.5597.30.1.0.9.1.5ColumnmbgLtNgCfgPhysicalIfBondingGroupread-writecurrentassign interface to bonding group; '0' means not assigned
1.3.6.1.4.1.5597.30.1.0.9.1.6ColumnmbgLtNgCfgPhysicalIfIpv6Moderead-writecurrentenable IPv6 mode
1.3.6.1.4.1.5597.30.1.0.10TablembgLtNgCfgVirtualIfTablenot-accessiblecurrenta table of service stati for the ethernet interfaces
1.3.6.1.4.1.5597.30.1.0.10.1RowmbgLtNgCfgVirtualIfTableEntrynot-accessiblecurrenta list of objects pertaining to a mrs input reference
1.3.6.1.4.1.5597.30.1.0.10.1.1ColumnmbgLtNgCfgVirtualIfIndexnot-accessiblecurrentspecifies the virtual interface index
1.3.6.1.4.1.5597.30.1.0.10.1.2ColumnmbgLtNgCfgVirtualIfIpv4Addrread-writecurrentinterfaces' ipv4 address
1.3.6.1.4.1.5597.30.1.0.10.1.3ColumnmbgLtNgCfgVirtualIfIpv4Netmaskread-writecurrentinterfaces' ipv4 netmask
1.3.6.1.4.1.5597.30.1.0.10.1.4ColumnmbgLtNgCfgVirtualIfIpv4Dhcpread-writecurrentinterface uses ipv4 dhcp?
1.3.6.1.4.1.5597.30.1.0.10.1.5ColumnmbgLtNgCfgVirtualIfIpv4AddrFromDhcpread-onlycurrentinterfaces' ipv4 address received from dhcp
1.3.6.1.4.1.5597.30.1.0.10.1.6ColumnmbgLtNgCfgVirtualIfIpv4NetmaskFromDhcpread-onlycurrentinterfaces' ipv4 netmask received from dhcp
1.3.6.1.4.1.5597.30.1.0.10.1.7ColumnmbgLtNgCfgVirtualIfIpv4BroadcastFromDhcpread-onlycurrentinterfaces' ipv4 broadcast received from dhcp
1.3.6.1.4.1.5597.30.1.0.10.1.8ColumnmbgLtNgCfgVirtualIfIpv4GatewayFromDhcpread-onlycurrentinterfaces' ipv4 gateway received from dhcp
1.3.6.1.4.1.5597.30.1.0.10.1.9ColumnmbgLtNgCfgVirtualIfIpv4DnsFromDhcpread-onlycurrentinterfaces' ipv4 dns server received from dhcp
1.3.6.1.4.1.5597.30.1.0.10.1.10ColumnmbgLtNgCfgVirtualIfIpv4DomainFromDhcpread-onlycurrentinterfaces' ipv4 dns server received from dhcp
1.3.6.1.4.1.5597.30.1.0.10.1.11ColumnmbgLtNgCfgVirtualIfIpv6Addrread-writecurrentinterfaces' ipv6 address
1.3.6.1.4.1.5597.30.1.0.10.1.12ColumnmbgLtNgCfgVirtualIfIpv6Dhcpread-writecurrentinterfaces uses ipv6 dhcp
1.3.6.1.4.1.5597.30.1.0.10.1.13ColumnmbgLtNgCfgVirtualIfIpv6RoutAddread-onlycurrentinterfaces' router advertisement ipv6 address
1.3.6.1.4.1.5597.30.1.0.10.1.14ColumnmbgLtNgCfgVirtualIfIpv6LinkLocalread-onlycurrentinterfaces' ipv6 link local address
1.3.6.1.4.1.5597.30.1.0.10.1.15ColumnmbgLtNgCfgVirtualIfAssignedread-writecurrentmapping to the physical interface this virtual one is assigned to
1.3.6.1.4.1.5597.30.1.0.10.1.16ColumnmbgLtNgCfgVirtualIfMacread-onlycurrentMAC-address of this virtual interface
1.3.6.1.4.1.5597.30.1.0.10.1.17ColumnmbgLtNgCfgVirtualIfLabelread-writecurrentuser description for this label (like an alias)
1.3.6.1.4.1.5597.30.1.0.10.1.18ColumnmbgLtNgCfgVirtualIfVlanread-writecurrentis vlan enabled
1.3.6.1.4.1.5597.30.1.0.10.1.19ColumnmbgLtNgCfgVirtualIfVlanTagread-writecurrentvlan tag
1.3.6.1.4.1.5597.30.1.0.10.1.20ColumnmbgLtNgCfgVirtualIfVlanPrioread-writecurrentvlan priority
1.3.6.1.4.1.5597.30.1.0.10.1.21ColumnmbgLtNgCfgVirtualIfClusterread-writecurrentis cluster mode enabled
1.3.6.1.4.1.5597.30.1.0.10.1.22ColumnmbgLtNgCfgVirtualIfClusterIpv4Addrread-writecurrentipv4 cluster address
1.3.6.1.4.1.5597.30.1.0.10.1.23ColumnmbgLtNgCfgVirtualIfClusterIpv4Netmaskread-writecurrentcluster ipv4 netmask
1.3.6.1.4.1.5597.30.1.0.10.1.24ColumnmbgLtNgCfgVirtualIfClusterPrioread-writecurrentcluster priority
1.3.6.1.4.1.5597.30.1.0.10.1.25ColumnmbgLtNgCfgVirtualIfServiceNtpread-writecurrentis ntp active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.26ColumnmbgLtNgCfgVirtualIfServiceHttpread-writecurrentis http active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.27ColumnmbgLtNgCfgVirtualIfServiceHttpsread-writecurrentis https active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.28ColumnmbgLtNgCfgVirtualIfServiceTelnetread-writecurrentis telnet active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.29ColumnmbgLtNgCfgVirtualIfServiceSshread-writecurrentis ssh active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.30ColumnmbgLtNgCfgVirtualIfServiceSnmpread-writecurrentis snmp active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.31ColumnmbgLtNgCfgVirtualIfServiceFtpread-writecurrentis ftp active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.32ColumnmbgLtNgCfgVirtualIfServiceTimeread-writecurrentis time active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.33ColumnmbgLtNgCfgVirtualIfServiceDaytimeread-writecurrentis daytime active on this interface
1.3.6.1.4.1.5597.30.1.0.10.1.34ColumnmbgLtNgCfgVirtualIfServiceFpcread-writecurrentis fpc active on this interface
1.3.6.1.4.1.5597.30.1.0.11ScalarmbgLtNgCfgEthernetGenClusterPortread-writecurrentgeneral cluster port
1.3.6.1.4.1.5597.30.1.0.12ScalarmbgLtNgCfgEthernetGenClusterIpread-writecurrentgeneral multicast cluster address
1.3.6.1.4.1.5597.30.1.1NodembgLtNgCfgNotifications
1.3.6.1.4.1.5597.30.1.1.0NodembgLtNgCfgSyslog
1.3.6.1.4.1.5597.30.1.1.0.1ScalarmbgLtNgCfgSyslogServerAddrread-writecurrentcomma separated string of all configured syslog servers; use such a list to set syslog servers
1.3.6.1.4.1.5597.30.1.1.0.2ScalarmbgLtNgCfgSyslogLoglevelread-writecurrentloglevel for syslog server
1.3.6.1.4.1.5597.30.1.1.1NodembgLtNgCfgEmail
1.3.6.1.4.1.5597.30.1.1.1.1ScalarmbgLtNgCfgEmailToread-writecurrentemail address to send alerts etc. to (receiving address)
1.3.6.1.4.1.5597.30.1.1.1.2ScalarmbgLtNgCfgEmailFromread-writecurrentemail address to send alerts etc. from (sending address)
1.3.6.1.4.1.5597.30.1.1.1.3ScalarmbgLtNgCfgEmailSmarthostAddrread-writecurrentSMTP smarthost used to send mail (ip or hostname)
1.3.6.1.4.1.5597.30.1.1.1.4ScalarmbgLtNgCfgEmailSmarthostPortread-writecurrentSMTP smarthost listenning port
1.3.6.1.4.1.5597.30.1.1.1.5ScalarmbgLtNgCfgEmailSmarthostAuthread-writecurrentuse authentication for smarthost
1.3.6.1.4.1.5597.30.1.1.1.6ScalarmbgLtNgCfgEmailSmarthostAuthUserread-writecurrentuser to authenticate at smarthost
1.3.6.1.4.1.5597.30.1.1.1.7ScalarmbgLtNgCfgEmailSmarthostAuthPwread-writecurrentpassword to authenticate user at smarthost
1.3.6.1.4.1.5597.30.1.1.2NodembgLtNgCfgWinpopup
1.3.6.1.4.1.5597.30.1.1.2.1ScalarmbgLtNgCfgWmailAddress1read-writecurrentfirst windows popup alert receiver (ip or hostname)
1.3.6.1.4.1.5597.30.1.1.2.2ScalarmbgLtNgCfgWmailAddress2read-writecurrentsecond windows popup alert receiver (ip or hostname)
1.3.6.1.4.1.5597.30.1.1.3NodembgLtNgCfgSNMP
1.3.6.1.4.1.5597.30.1.1.3.1TablembgLtNgCfgSnmpTrapRecTablenot-accessiblecurrenta table of SNMP trap receiver information
1.3.6.1.4.1.5597.30.1.1.3.1.1RowmbgLtNgCfgSnmpTrapRecTableEntrynot-accessiblecurrenta list of objects pertaining to an interface and concerning broad-, multi- and manycast
1.3.6.1.4.1.5597.30.1.1.3.1.1.1ColumnmbgLtNgCfgSnmpTrapRecIndexnot-accessiblecurrentindex of different SNMP trap receivers
1.3.6.1.4.1.5597.30.1.1.3.1.1.2ColumnmbgLtNgCfgSnmpTrapRecAddrread-writecurrentSNMP trap receiver address (ip or hostname)
1.3.6.1.4.1.5597.30.1.1.3.1.1.3ColumnmbgLtNgCfgSnmpTrapRecCommunityread-writecurrentSNMP trap receiver community
1.3.6.1.4.1.5597.30.1.1.3.1.1.4ColumnmbgLtNgCfgSnmpTrapRecVersionread-writecurrentSNMP trap receiver version
1.3.6.1.4.1.5597.30.1.1.3.2ScalarmbgLtNgCfgSnmpReadCommunityread-writecurrentread community for SNMPv1 and SNMPv2c
1.3.6.1.4.1.5597.30.1.1.3.3ScalarmbgLtNgCfgSnmpWriteCommunityread-writecurrentread community for SNMPv1 and SNMPv2c
1.3.6.1.4.1.5597.30.1.1.3.4ScalarmbgLtNgCfgSnmpContactread-writecurrentSNMP contact string for Lantime
1.3.6.1.4.1.5597.30.1.1.3.5ScalarmbgLtNgCfgSnmpLocationread-writecurrentSNMP location string for Lantime
1.3.6.1.4.1.5597.30.1.1.3.6ScalarmbgLtNgCfgSnmpV3UserNameread-writecurrentusername for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.7ScalarmbgLtNgCfgSnmpV3UserRightsread-writecurrentprivacy protocol for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.8ScalarmbgLtNgCfgSnmpV3Contextread-writecurrentcontext string for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.9ScalarmbgLtNgCfgSnmpV3SecurityLevelread-writecurrentauthentication level for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.10ScalarmbgLtNgCfgSnmpV3AuthProtocolread-writecurrentauthentication protocol for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.11ScalarmbgLtNgCfgSnmpV3AuthPassphraseread-writecurrentauthentication passphrase for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.12ScalarmbgLtNgCfgSnmpV3PrivProtocolread-writecurrentprivacy protocol for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.13ScalarmbgLtNgCfgSnmpV3PrivPassphraseread-writecurrentprivacy passphrase for SNMPv3
1.3.6.1.4.1.5597.30.1.1.3.14ScalarmbgLtNgCfgSnmpRetriesread-writecurrentnumber of retries for sending traps
1.3.6.1.4.1.5597.30.1.1.3.15ScalarmbgLtNgCfgSnmpTimeoutread-writecurrenttimeout for sending traps (in seconds)
1.3.6.1.4.1.5597.30.1.1.3.16ScalarmbgLtNgCfgSnmpEnabledVersionread-writecurrentcurrently enabled SNMP version
1.3.6.1.4.1.5597.30.1.1.4NodembgLtNgCfgWalldisplay
1.3.6.1.4.1.5597.30.1.1.4.1ScalarmbgLtNgCfgVP100Display1Addrread-writecurrentaddress of wall display (ip or hostname)
1.3.6.1.4.1.5597.30.1.1.4.2ScalarmbgLtNgCfgVP100Display1SNread-writecurrentserial number of first VP100 wall display
1.3.6.1.4.1.5597.30.1.1.4.3ScalarmbgLtNgCfgVP100Display2Addrread-writecurrentaddress of wall display (ip or hostname)
1.3.6.1.4.1.5597.30.1.1.4.4ScalarmbgLtNgCfgVP100Display2SNread-writecurrentserial number of second VP100 wall display
1.3.6.1.4.1.5597.30.1.1.5NodembgLtNgCfgNtpClientMonitoring
1.3.6.1.4.1.5597.30.1.1.5.1ScalarmbgLtNgCfgNtpMaxClientOffsetread-writecurrentmax NTP client offset limit in milliseconds
1.3.6.1.4.1.5597.30.1.1.5.2ScalarmbgLtNgCfgNtpMaxClientStratumread-writecurrentmax NTP client stratum level
1.3.6.1.4.1.5597.30.1.1.6NodembgLtNgCfgTrapTrigger
1.3.6.1.4.1.5597.30.1.1.6.1ScalarmbgLtNgCfgTrapNormalOperationread-writecurrentstring containing signaling information ( comma-separated ); use the following aliases to set params: Email -> email Wmail -> wmail Snmp -> snmp VP100 -> disp …
1.3.6.1.4.1.5597.30.1.1.6.2ScalarmbgLtNgCfgTrapNtpNotSyncread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.3ScalarmbgLtNgCfgTrapNtpSyncread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.4ScalarmbgLtNgCfgTrapNtpStoppedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.5ScalarmbgLtNgCfgTrapServerBootread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.6ScalarmbgLtNgCfgTrapRefclockNotRespondingread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.7ScalarmbgLtNgCfgTrapRefclockSynchronizedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.8ScalarmbgLtNgCfgTrapRefclockNotSynchronizedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.9ScalarmbgLtNgCfgTrapSecRefclockNotRespondingread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.10ScalarmbgLtNgCfgTrapSecRefclockSynchronizedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.11ScalarmbgLtNgCfgTrapSecRefclockNotSynchronizedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.12ScalarmbgLtNgCfgTrapAntennaFaultyread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.13ScalarmbgLtNgCfgTrapAntennaReconnectread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.14ScalarmbgLtNgCfgTrapAntennaShortCircuitread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.15ScalarmbgLtNgCfgTrapConfigChangedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.16ScalarmbgLtNgCfgTrapLeapSecAnnouncedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.17ScalarmbgLtNgCfgTrapNtpClientLimitExceededread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.18ScalarmbgLtNgCfgTrapRefSrcLimitExceededread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.19ScalarmbgLtNgCfgTrapRefSrcDisconnectedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.20ScalarmbgLtNgCfgTrapRefSrcReconnectedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.21ScalarmbgLtNgCfgTrapShsTimeLimitErrorread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.22ScalarmbgLtNgCfgTrapShsTimeLimitWarningread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.23ScalarmbgLtNgCfgTrapNetworkDownread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.24ScalarmbgLtNgCfgTrapNetworkUpread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.25ScalarmbgLtNgCfgTrapPowerSupplyUpread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.26ScalarmbgLtNgCfgTrapPowerSupplyDownread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.27ScalarmbgLtNgCfgTrapFdmErrorread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.28ScalarmbgLtNgCfgTrapLowSystemResourcesread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.29ScalarmbgLtNgCfgTrapPtpNetworkDownread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.30ScalarmbgLtNgCfgTrapPtpNetworkUpread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.31ScalarmbgLtNgCfgTrapPtpStateChangedread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.32ScalarmbgLtNgCfgTrapPtpErrorread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.33ScalarmbgLtNgCfgTrapFanDownread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.34ScalarmbgLtNgCfgTrapFanUpread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.35ScalarmbgLtNgCfgRepeatEventread-writecurrentwhen to send last error trap message again
1.3.6.1.4.1.5597.30.1.1.6.36ScalarmbgLtNgCfgRepetitionsread-writecurrenthow often do you want to resend an error trap
1.3.6.1.4.1.5597.30.1.1.6.37ScalarmbgLtNgCfgTrapWarmedUpread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.1.6.38ScalarmbgLtNgCfgTrapNotWarmedUpread-writecurrentsee 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
1.3.6.1.4.1.5597.30.1.2NodembgLtNgCfgSecurity
1.3.6.1.4.1.5597.30.1.2.0NodembgLtNgCfgLoginAccess
1.3.6.1.4.1.5597.30.1.2.0.1ScalarmbgLtNgCfgDisableRootLoginread-writecurrentdo not allow user 'root' to login
1.3.6.1.4.1.5597.30.1.2.0.2ScalarmbgLtNgCfgAllowNetworkDiscoveryread-writecurrentallow LANTIME to be discovered via network mdns
1.3.6.1.4.1.5597.30.1.2.1NodembgLtNgCfgFrontPanel
1.3.6.1.4.1.5597.30.1.2.1.1ScalarmbgLtNgCfgLockFrontPanelread-writecurrentdo not allow usage of the front panel
1.3.6.1.4.1.5597.30.1.2.1.2ScalarmbgLtNgCfgDisableUsbPortread-writecurrentdo not allow usage of front USB port
1.3.6.1.4.1.5597.30.1.2.2NodembgLtNgCfgSsh
1.3.6.1.4.1.5597.30.1.2.2.1ScalarmbgLtNgCfgSshKeyLengthread-writecurrentssh key length in bits
1.3.6.1.4.1.5597.30.1.2.2.2ScalarmbgLtNgCfgSshShellTimeoutread-writecurrentssh shell timeout in seconds
1.3.6.1.4.1.5597.30.1.3NodembgLtNgCfgNtp
1.3.6.1.4.1.5597.30.1.3.1TablembgLtNgCfgNtpTablenot-accessiblecurrenta table of configured, external NTP servers
1.3.6.1.4.1.5597.30.1.3.1.1RowmbgLtNgCfgNtpTableEntrynot-accessiblecurrenta list of objects pertaining to a configured,external NTP server
1.3.6.1.4.1.5597.30.1.3.1.1.1ColumnmbgLtNgCfgNtpIndexnot-accessiblecurrentindex (and no.) of external NTP server
1.3.6.1.4.1.5597.30.1.3.1.1.2ColumnmbgLtNgCfgNtpServerIPread-writecurrentip address for external NTP server
1.3.6.1.4.1.5597.30.1.3.1.1.3ColumnmbgLtNgCfgNtpServerKeyread-writecurrentkey for external NTP server
1.3.6.1.4.1.5597.30.1.3.1.1.4ColumnmbgLtNgCfgNtpServerAutokeyread-writecurrentis autokey enabled for the external NTP server
1.3.6.1.4.1.5597.30.1.3.1.1.5ColumnmbgLtNgCfgNtpServerMinpollread-writecurrentis autokey enabled for the external NTP server
1.3.6.1.4.1.5597.30.1.3.1.1.6ColumnmbgLtNgCfgNtpServerMaxpollread-writecurrentis autokey enabled for the external NTP server
1.3.6.1.4.1.5597.30.1.3.1.1.7ColumnmbgLtNgCfgNtpServerIburstread-writecurrentis autokey enabled for the external NTP server
1.3.6.1.4.1.5597.30.1.3.2TablembgLtNgCfgNtpBMTablenot-accessiblecurrenta table of configured, external NTP servers
1.3.6.1.4.1.5597.30.1.3.2.1RowmbgLtNgCfgNtpBMTableEntrynot-accessiblecurrenta list of objects pertaining to an interface and concerning broad-, multi- and manycast
1.3.6.1.4.1.5597.30.1.3.2.1.1ColumnmbgLtNgCfgNtpBMIndexnot-accessiblecurrentindex of interface concerning different NTP modes
1.3.6.1.4.1.5597.30.1.3.2.1.2ColumnmbgLtNgCfgNtpBroadAddrread-onlycurrentaddress for NTP broadcast mode
1.3.6.1.4.1.5597.30.1.3.2.1.3ColumnmbgLtNgCfgNtpBroadSymKeyread-onlycurrentsymmetric key number for broadcast
1.3.6.1.4.1.5597.30.1.3.2.1.4ColumnmbgLtNgCfgNtpBroadIntervalread-onlycurrentNTP broadcast interval on specific interval
1.3.6.1.4.1.5597.30.1.3.2.1.5ColumnmbgLtNgCfgNtpBroadUseAutokeyread-onlycurrentuse autokey for broadcast
1.3.6.1.4.1.5597.30.1.3.3ScalarmbgLtNgCfgNtpEnableMulticastread-writecurrentenable or disable multicast mode
1.3.6.1.4.1.5597.30.1.3.4ScalarmbgLtNgCfgNtpMultiAddrread-writecurrentaddress for NTP multicast mode
1.3.6.1.4.1.5597.30.1.3.5ScalarmbgLtNgCfgNtpMultiIntervalread-writecurrentNTP multicast interval on specific interval
1.3.6.1.4.1.5597.30.1.3.6ScalarmbgLtNgCfgNtpMultiSymKeyread-writecurrentsymmetric key number for multicast
1.3.6.1.4.1.5597.30.1.3.7ScalarmbgLtNgCfgNtpMultiUseAutokeyread-writecurrentuse autokey for multicast
1.3.6.1.4.1.5597.30.1.3.8ScalarmbgLtNgCfgNtpEnableManycastread-writecurrentenable or disable manycast mode for this interface
1.3.6.1.4.1.5597.30.1.3.9ScalarmbgLtNgCfgNtpManyAddrread-writecurrentaddress for NTP manycast mode
1.3.6.1.4.1.5597.30.1.3.11ScalarmbgLtNgCfgNtpManySymKeyread-writecurrentsymmetric key number for manycast
1.3.6.1.4.1.5597.30.1.3.12ScalarmbgLtNgCfgNtpManyUseAutokeyread-writecurrentuse autokey for manycast
1.3.6.1.4.1.5597.30.1.3.13ScalarmbgLtNgCfgNtpLocalClkStratumread-writecurrentstratum of local clock
1.3.6.1.4.1.5597.30.1.3.14ScalarmbgLtNgCfgNtpDisableLocalClkread-writecurrentdisable local clock
1.3.6.1.4.1.5597.30.1.3.15ScalarmbgLtNgCfgNtpSpoofLocalTimeread-writeobsoleteNTP outputs local time instead of UTC; see mbgLtNgCfgNtpTimeScale
1.3.6.1.4.1.5597.30.1.3.16ScalarmbgLtNgCfgNtpLocalTrustedKeysread-writecurrentlocal trusted key
1.3.6.1.4.1.5597.30.1.3.17ScalarmbgLtNgCfgNtpTrusttimeread-writecurrentaccept async reference clock for this amount of time in seconds
1.3.6.1.4.1.5597.30.1.3.18ScalarmbgLtNgCfgNtpTimeScaleread-writecurrenttimescale
1.3.6.1.4.1.5597.30.1.3.19ScalarmbgLtNgCfgNtpEnableClientCounterread-writecurrentenable NTP request client counting
1.3.6.1.4.1.5597.30.1.3.20ScalarmbgLtNgCfgNtpEnableClientCounterDurationread-writecurrentNTP client counter duration in seconds; 0 means continuously
1.3.6.1.4.1.5597.30.1.4NodembgLtNgCfgPtp
1.3.6.1.4.1.5597.30.1.4.1TablembgLtNgCfgPtpTablenot-accessiblecurrenta table of PTPv2 related configurtion variables
1.3.6.1.4.1.5597.30.1.4.1.1RowmbgLtNgCfgPtpTableEntrynot-accessiblecurrenta list of configuration objects pertaining to a PTPv2 module
1.3.6.1.4.1.5597.30.1.4.1.1.1ColumnmbgLtNgCfgPtpIndexnot-accessiblecurrentindex for PTPv2 module
1.3.6.1.4.1.5597.30.1.4.1.1.2ColumnmbgLtNgCfgPtpHostnameread-onlycurrentnetwork hostname
1.3.6.1.4.1.5597.30.1.4.1.1.3ColumnmbgLtNgCfgPtpDomainnameread-onlycurrentnetwork domain
1.3.6.1.4.1.5597.30.1.4.1.1.4ColumnmbgLtNgCfgPtpNameserver1read-onlycurrentethernet nameserver for hostname resolving
1.3.6.1.4.1.5597.30.1.4.1.1.5ColumnmbgLtNgCfgPtpNameserver2read-onlycurrentethernet nameserver for hostname resolving
1.3.6.1.4.1.5597.30.1.4.1.1.6ColumnmbgLtNgCfgPtpIpv4read-onlycurrentip address
1.3.6.1.4.1.5597.30.1.4.1.1.7ColumnmbgLtNgCfgPtpNetmaskread-onlycurrentnetmask
1.3.6.1.4.1.5597.30.1.4.1.1.8ColumnmbgLtNgCfgPtpGatewayread-onlycurrentdefault gateway
1.3.6.1.4.1.5597.30.1.4.1.1.9ColumnmbgLtNgCfgPtpEnableVlanread-onlycurrentEnable VLAN if it is supported
1.3.6.1.4.1.5597.30.1.4.1.1.10ColumnmbgLtNgCfgPtpVlanIdread-onlycurrentVLAN id ranges from 0-4096
1.3.6.1.4.1.5597.30.1.4.1.1.11ColumnmbgLtNgCfgPtpVlanPriorityread-onlycurrentVLAN priority ranges from 0-7
1.3.6.1.4.1.5597.30.1.4.1.1.12ColumnmbgLtNgCfgPtpEnableDhcpread-onlycurrentEnable DCHP for PTPv2 module
1.3.6.1.4.1.5597.30.1.4.1.1.13ColumnmbgLtNgCfgPtpModeread-onlycurrentPTP mode
1.3.6.1.4.1.5597.30.1.4.1.1.14ColumnmbgLtNgCfgPtpDelayMechanismread-onlycurrenthow to calculate delay mechanism
1.3.6.1.4.1.5597.30.1.4.1.1.15ColumnmbgLtNgCfgPtpNetworkProtocolread-onlycurrenthow to calculate delay mechanism
1.3.6.1.4.1.5597.30.1.4.1.1.16ColumnmbgLtNgCfgPtpDomainNumberread-onlycurrentptp domain membership
1.3.6.1.4.1.5597.30.1.4.1.1.17ColumnmbgLtNgCfgPtpPriority1read-onlycurrentptp user defined major priority
1.3.6.1.4.1.5597.30.1.4.1.1.18ColumnmbgLtNgCfgPtpPriority2read-onlycurrentptp user defined minor priority
1.3.6.1.4.1.5597.30.1.4.1.1.19ColumnmbgLtNgCfgPtpSyncIntervalread-onlycurrentvalue is defined as power of 2; for example: 2 = one message every 4 seconds, -2 = 4 messages every second
1.3.6.1.4.1.5597.30.1.4.1.1.20ColumnmbgLtNgCfgPtpAnnounceIntervalread-onlycurrentsee 'mbgLtNgCfPtpSyncInterval' for explanation
1.3.6.1.4.1.5597.30.1.4.1.1.21ColumnmbgLtNgCfgPtpDelayReqIntervalread-onlycurrentsee 'mbgLtNgCfPtpSyncInterval' for explanation
1.3.6.1.4.1.5597.30.1.4.1.1.22ColumnmbgLtNgCfgPtpTimescaleread-onlycurrentsee 'mbgLtNgCfPtpSyncInterval' for explanation
1.3.6.1.4.1.5597.30.1.4.1.1.23ColumnmbgLtNgCfgPtpIpv6Availread-onlycurrentIs IPv6 supported?
1.3.6.1.4.1.5597.30.1.4.1.1.24ColumnmbgLtNgCfgPtpIpv6Moderead-onlycurrentIPv6 addressing mode
1.3.6.1.4.1.5597.30.1.4.1.1.25ColumnmbgLtNgCfgPtpIpv6Addressread-onlycurrentIPv6 address if supported, else n/a
1.3.6.1.4.1.5597.30.1.4.1.1.26ColumnmbgLtNgCfgPtpIpv6McastScoperead-onlycurrentMulticast scope. See RFC 7346 and RFC 4291
1.3.6.1.4.1.5597.30.1.4.1.1.27ColumnmbgLtNgCfgPtpDisableSshread-onlycurrentDisable SSH for PTP port
1.3.6.1.4.1.5597.30.1.4.1.1.28ColumnmbgLtNgCfgPtpDscpClassread-onlycurrentDSCP classification value ranges from 0-64
1.3.6.1.4.1.5597.30.1.4.1.1.29ColumnmbgLtNgCfgPtpMcastTtlread-onlycurrentMulticast TTL value ranges from 0-255
1.3.6.1.4.1.5597.30.1.4.1.1.30ColumnmbgLtNgCfgPtpOpModeread-onlycurrentGeneral PTP operation mode
1.3.6.1.4.1.5597.30.1.4.1.1.31ColumnmbgLtNgCfgPtpProfileread-onlycurrentPTP profile
1.3.6.1.4.1.5597.30.1.4.1.1.32ColumnmbgLtNgCfgPtpHybridModeread-onlycurrentRun card in hybrid mode
1.3.6.1.4.1.5597.30.1.4.1.1.33ColumnmbgLtNgCfgPtpUcastMstAddrread-onlycurrentIP address of unicast master when in slave mode. Only 1!!! is shown and can be set.
1.3.6.1.4.1.5597.30.1.4.1.1.34ColumnmbgLtNgCfgPtpAnnRcptTmoutread-onlycurrentTimeout for announce messages
1.3.6.1.4.1.5597.30.1.4.1.1.35ColumnmbgLtNgCfgPtpMessageDurationread-onlycurrentTime period until master stops sending messages [s]
1.3.6.1.4.1.5597.30.1.4.1.1.36ColumnmbgLtNgCfgPtpSyncEAvailread-onlycurrentIs SyncE supported?
1.3.6.1.4.1.5597.30.1.4.1.1.37ColumnmbgLtNgCfgPtpSyncEEnabledread-onlycurrentIs Sync-E enabled if supported?
1.3.6.1.4.1.5597.30.1.4.1.1.38ColumnmbgLtNgCfgPtpSyncEQltLvlSelEnableread-onlycurrentEnable quality selection?
1.3.6.1.4.1.5597.30.1.4.1.1.39ColumnmbgLtNgCfgPtpSyncESdhNwOptionread-onlycurrentSdh network option
1.3.6.1.4.1.5597.30.1.4.1.1.40ColumnmbgLtNgCfgPtpSyncEInputSsmread-onlycurrentInput SSMs combied for both options. You should be aware of using which code when.
1.3.6.1.4.1.5597.30.1.4.1.1.41ColumnmbgLtNgCfgPtpSyncEOutputSsmread-onlycurrentInput SSMs combined for both options. You should be aware of using which code when.
1.3.6.1.4.1.5597.30.1.4.1.1.42ColumnmbgLtNgCfgPtpSyncEGbitCopperModeread-onlycurrentGigabit copper modes
1.3.6.1.4.1.5597.30.1.4.1.1.43ColumnmbgLtNgCfgPtpMiscEnable1Stepread-onlycurrentEnable PTP 1 step if supported
1.3.6.1.4.1.5597.30.1.4.1.1.44ColumnmbgLtNgCfgPtpDisableMgmtMsgsread-onlycurrentDisable management messages if suppported
1.3.6.1.4.1.5597.30.1.4.1.1.45ColumnmbgLtNgCfgPtpOutput1read-onlycurrentAdditional I/O output if suppported
1.3.6.1.4.1.5597.30.1.4.1.1.46ColumnmbgLtNgCfgPtpOutput2read-onlycurrentAdditional I/O output if suppported
1.3.6.1.4.1.5597.30.1.5NodembgLtNgCfgSystem
1.3.6.1.4.1.5597.30.1.5.0NodembgLtNgCfgGeneral
1.3.6.1.4.1.5597.30.1.5.0.1ScalarmbgLtNgCfgWebLanguageread-onlycurrentset language for web interface
1.3.6.1.4.1.5597.30.1.5.0.2ScalarmbgLtNgCfgActivateChangesAsStartupread-writecurrentactivate changes automatically as startup configuration
1.3.6.1.4.1.5597.30.1.5.1NodembgLtNgCfgDisplay
1.3.6.1.4.1.5597.30.1.5.1.1ScalarmbgLtNgCfgEnableFrontPanelLightread-writecurrentactive light at front panel
1.3.6.1.4.1.5597.30.2NodembgLtNgCommands
1.3.6.1.4.1.5597.30.2.1ScalarmbgLtNgCmdExecuteread-writecurrentSend a command to the timeserver to be executed; Attention: Command should be executed with a timeout of 120 seconds and 0 retries
1.3.6.1.4.1.5597.30.2.2ScalarmbgLtNgCmdSetTimeread-writecurrentReference time can be set via a date-time string in format: yyyy-mm-dd hh:mm:ss Time is interpreted as configured via web interface at menu: 'Receiver'->'Time …
1.3.6.1.4.1.5597.30.3NodembgLtNgTrapNotifications
1.3.6.1.4.1.5597.30.3.0NodembgLtNgTraps
1.3.6.1.4.1.5597.30.3.0.1NotificationmbgLtNgTrapNTPNotSynccurrenttrap to be sent when NTP is not synchronised
1.3.6.1.4.1.5597.30.3.0.2NotificationmbgLtNgTrapNTPStoppedcurrenttrap to be sent when NTP is stopped
1.3.6.1.4.1.5597.30.3.0.3NotificationmbgLtNgTrapServerBootcurrenttrap to be sent when time server has finished boot sequence
1.3.6.1.4.1.5597.30.3.0.4NotificationmbgLtNgTrapReceiverNotRespondingcurrenttrap to be sent when receiver is not responding
1.3.6.1.4.1.5597.30.3.0.5NotificationmbgLtNgTrapReceiverNotSynccurrenttrap to be sent when receiver is not synchronised
1.3.6.1.4.1.5597.30.3.0.6NotificationmbgLtNgTrapAntennaFaultycurrenttrap to be sent when connection to antenna is broken
1.3.6.1.4.1.5597.30.3.0.7NotificationmbgLtNgTrapAntennaReconnectcurrenttrap to be sent when antenna has been reconnected
1.3.6.1.4.1.5597.30.3.0.8NotificationmbgLtNgTrapConfigChangedcurrenttrap to be sent when timeserver reloaded its configuration
1.3.6.1.4.1.5597.30.3.0.9NotificationmbgLtNgTrapLeapSecondAnnouncedcurrenttrap to be sent when a leap second has been announced
1.3.6.1.4.1.5597.30.3.0.10NotificationmbgLtNgTrapSHSTimeLimitErrorcurrenttrap to be sent when SHS timelimit exceeded
1.3.6.1.4.1.5597.30.3.0.11NotificationmbgLtNgTrapSecondaryRecNotSynccurrenttrap to be sent when secondary receiver in SHS system is not synchronised
1.3.6.1.4.1.5597.30.3.0.12NotificationmbgLtNgTrapPowerSupplyFailurecurrenttrap to be sent when one of the redundant power supplies fails
1.3.6.1.4.1.5597.30.3.0.13NotificationmbgLtNgTrapAntennaShortCircuitcurrenttrap to be sent when a connected antenna fails due to a short circuit
1.3.6.1.4.1.5597.30.3.0.14NotificationmbgLtNgTrapReceiverSynccurrenttrap to be sent when receiver is synchronised
1.3.6.1.4.1.5597.30.3.0.15NotificationmbgLtNgTrapNTPClientAlarmcurrenttrap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable.
1.3.6.1.4.1.5597.30.3.0.16NotificationmbgLtNgTrapPowerSupplyUpcurrenttrap to be sent when a power supply returned to a healthy state.
1.3.6.1.4.1.5597.30.3.0.17NotificationmbgLtNgTrapNetworkDowncurrenttrap to be sent when a monitored network port is down.
1.3.6.1.4.1.5597.30.3.0.18NotificationmbgLtNgTrapNetworkUpcurrenttrap to be sent when a monitored network port is up.
1.3.6.1.4.1.5597.30.3.0.19NotificationmbgLtNgTrapSecondaryRecNotRespcurrenttrap to be sent when secondary receiver is not responding
1.3.6.1.4.1.5597.30.3.0.30NotificationmbgLtNgTrapXmrLimitExceededcurrenttrap to be sent when a reference offset exceeds the configured limit
1.3.6.1.4.1.5597.30.3.0.31NotificationmbgLtNgTrapXmrRefDisconnectcurrenttrap to be sent when a reference signal has been lost
1.3.6.1.4.1.5597.30.3.0.32NotificationmbgLtNgTrapXmrRefReconnectcurrenttrap to be sent when a reference signal recovered
1.3.6.1.4.1.5597.30.3.0.33NotificationmbgLtNgTrapFdmErrorcurrenttrap to be sent when the Fdm module generates an alarm
1.3.6.1.4.1.5597.30.3.0.34NotificationmbgLtNgTrapSHSTimeLimitWarningcurrenttrap to be sent when SHS warning limit exceeded
1.3.6.1.4.1.5597.30.3.0.35NotificationmbgLtNgTrapSecondaryRecSynccurrenttrap to be sent when secondary receiver is synchronised
1.3.6.1.4.1.5597.30.3.0.36NotificationmbgLtNgTrapNTPSynccurrenttrap to be sent when NTP is synchronised
1.3.6.1.4.1.5597.30.3.0.37NotificationmbgLtNgTrapPtpPortDisconnectedcurrenttrap to be sent when PTP network port got disconnected
1.3.6.1.4.1.5597.30.3.0.38NotificationmbgLtNgTrapPtpPortConnectedcurrenttrap to be sent when PTP network port got connected
1.3.6.1.4.1.5597.30.3.0.39NotificationmbgLtNgTrapPtpStateChangedcurrenttrap to be sent when PTP state changed (e.g. from 'passive' to 'master')
1.3.6.1.4.1.5597.30.3.0.40NotificationmbgLtNgTrapPtpErrorcurrenttrap to be sent when PTP raised an error
1.3.6.1.4.1.5597.30.3.0.41NotificationmbgLtNgTrapLowSystemResourcescurrenttrap to be sent when system is running on low resources
1.3.6.1.4.1.5597.30.3.0.45NotificationmbgLtNgTrapFanDowncurrenttrap to be sent when fan goes down
1.3.6.1.4.1.5597.30.3.0.46NotificationmbgLtNgTrapFanUpcurrenttrap to be sent when fan comes up
1.3.6.1.4.1.5597.30.3.0.47NotificationmbgLtNgTrapCertificateExpiredcurrenttrap to be sent when certificate expired or will expire
1.3.6.1.4.1.5597.30.3.0.48NotificationmbgLtNgTrapSufficientSystemResourcescurrenttrap to be sent when system has regained sufficient resources
1.3.6.1.4.1.5597.30.3.0.49NotificationmbgLtNgTrapOscillatorWarmedUpcurrenttrap to be sent when oscillator is warmed up
1.3.6.1.4.1.5597.30.3.0.50NotificationmbgLtNgTrapOscillatorNotWarmedUpcurrenttrap to be sent when oscillator is not warmed up
1.3.6.1.4.1.5597.30.3.0.51NotificationmbgLtNgTrapXmrRefChangedcurrenttrap to be sent when XMR reference source changed
1.3.6.1.4.1.5597.30.3.0.52NotificationmbgLtNgTrapClusterMasterChangedcurrenttrap to be sent when cluster mode is active and cluster changed
1.3.6.1.4.1.5597.30.3.0.53NotificationmbgLtNgTrapClusterFalsetickerDetectedcurrenttrap to be sent when cluster mode is active and a cluster member is dectected as falseticker
1.3.6.1.4.1.5597.30.3.0.54NotificationmbgLtNgTrapClusterFalsetickerClearedcurrenttrap to be sent when cluster mode is active and a cluster member is no longer a falseticker
1.3.6.1.4.1.5597.30.3.0.55NotificationmbgLtNgTrapSHSTimeLimitOkcurrenttrap to be sent when SHS timelimit error has been acknowledged or time difference drops below warning limit.
1.3.6.1.4.1.5597.30.3.0.56NotificationmbgLtNgTrapIMSErrorcurrenttrap to be sent when an IMS module is not responsive anymore, has got temperature issues, etc. ...
1.3.6.1.4.1.5597.30.3.0.57NotificationmbgLtNgTrapIMSOkcurrenttrap to be sent when an IMS module returns to healthy state.
1.3.6.1.4.1.5597.30.3.0.58NotificationmbgLtNgTrapFDMOkcurrenttrap to be sent when an FDM module returns to healthy state.
1.3.6.1.4.1.5597.30.3.0.59NotificationmbgLtNgTrapNTPOffsetLimitExceededcurrenttrap to be sent when monitoring an NTP client and its offset limit is exceeded
1.3.6.1.4.1.5597.30.3.0.60NotificationmbgLtNgTrapNTPOffsetLimitOkcurrenttrap to be sent when monitoring an NTP client and its offset limit is back again in a valid range
1.3.6.1.4.1.5597.30.3.0.61NotificationmbgLtNgTrapXheRubOkcurrenttrap to be sent when external rubidium announces OK
1.3.6.1.4.1.5597.30.3.0.62NotificationmbgLtNgTrapXheRubErrorcurrenttrap to be sent when external rubidium announces error
1.3.6.1.4.1.5597.30.3.0.63NotificationmbgLtNgTrapPowerConsumptionExceededcurrenttrap to be sent when device consumes too much power
1.3.6.1.4.1.5597.30.3.0.64NotificationmbgLtNgTrapPowerConsumptionOkcurrenttrap to be sent when device has got enough power
1.3.6.1.4.1.5597.30.3.0.65NotificationmbgLtNgTrapPowerRedundancyNotAvailcurrenttrap to be sent when there currently is no power supply backup avail
1.3.6.1.4.1.5597.30.3.0.66NotificationmbgLtNgTrapPowerRedundancyAvailcurrenttrap to be sent when there is at least one power supply as backup
1.3.6.1.4.1.5597.30.3.0.67NotificationmbgLtNgTrapTrustedSourceOkcurrenttrap to be sent when a XMR source's time deviation returns to its configured bounds
1.3.6.1.4.1.5597.30.3.0.68NotificationmbgLtNgTrapTrustedSourceErrorcurrenttrap to be sent when a XMR source's time deviation exceeds a configured limit
1.3.6.1.4.1.5597.30.3.0.69NotificationmbgLtNgTrapSynceInputQualityLevelChangedcurrenttrap to be sent when the Quality Level of a Sync-E source changed
1.3.6.1.4.1.5597.30.3.0.70NotificationmbgLtNgTrapHttpsSelfSignedCertificateInUsecurrenttrap to be sent when a self signed HTTPS certificate is in use
1.3.6.1.4.1.5597.30.3.0.71NotificationmbgLtNgTrapEsiItuLimitsViolatedcurrenttrap to be sent when the ITU Limits of an ESI Input is violated
1.3.6.1.4.1.5597.30.3.0.72NotificationmbgLtNgTrapEsiItuLimitsadheredcurrenttrap to be sent when the ITU Limits of an ESI Input is adhered
1.3.6.1.4.1.5597.30.3.0.73NotificationmbgLtNgTrapImsPortErrorcurrenttrap to be sent when an Error was detected at an Input or Output Port of an IMS Module
1.3.6.1.4.1.5597.30.3.0.74NotificationmbgLtNgTrapImsPortOkcurrenttrap to be sent when all Input and Output Ports of an IMS Module are OK
1.3.6.1.4.1.5597.30.3.0.75NotificationmbgLtNgTrapMrsSourceInvalidcurrenttrap to be sent when a MRS Reference Souce will be in status invalid
1.3.6.1.4.1.5597.30.3.0.76NotificationmbgLtNgTrapMrsSourceOkcurrenttrap to be sent when a MRS Reference Souce will be in status OK
1.3.6.1.4.1.5597.30.3.0.77NotificationmbgLtNgTrapNormalOperationcurrenttrap to be sent when the system returned to a healthy state
1.3.6.1.4.1.5597.30.3.0.78NotificationmbgLtNgTrapFailLockUserBannedcurrenttrap to be sent if too much login failures were registered for a user
1.3.6.1.4.1.5597.30.3.0.88NotificationmbgLtNgTrapHeartbeatcurrenttrap to be sent periodically to indicate that time server is still alive
1.3.6.1.4.1.5597.30.3.0.99NotificationmbgLtNgTrapTestNotificationcurrenttrap to be sent when a test notification has been requested
1.3.6.1.4.1.5597.30.3.0.100ScalarmbgLtNgTrapMessageread-onlycurrentused as a payload object for all traps, holds a clear text event message
1.3.6.1.4.1.5597.30.90NodembgLtNgConformance
1.3.6.1.4.1.5597.30.90.1NodembgLtNgCompliances
1.3.6.1.4.1.5597.30.90.1.1CompliancembgLtNgCompliancecurrentThe compliance statement for SNMP entities which implement version 2 of the LANTIME MIB
1.3.6.1.4.1.5597.30.90.2NodembgLtNgGroups
1.3.6.1.4.1.5597.30.90.2.1GroupmbgLtNgObjectsGroupcurrentThe collection of objects for the LANTIME MIB
1.3.6.1.4.1.5597.30.90.2.2GroupmbgLtNgTrapsGroupcurrentThe collection of traps for the LANTIME MIB
MIB Viewer