MBG-SNMP-RSC-MDU-MIB
65 objects
Top-level infrastructure of the MBG-SNMP project enterprise MIB tree
Imported Objects
| MBG-SNMP-ROOT-MIB | mbgSnmpRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5597.80 | IdentitymbgRSC180 | Top-level infrastructure of the MBG-SNMP project enterprise MIB tree | ||
| 1.3.6.1.4.1.5597.80.0 | NodembgRefClock | |||
| 1.3.6.1.4.1.5597.80.0.0 | NodembgRefClockStatus | |||
| 1.3.6.1.4.1.5597.80.0.0.1 | TablembgRefClockTable | not-accessible | current | A table of content for individual clocks. |
| 1.3.6.1.4.1.5597.80.0.0.1.1 | RowmbgRefClockTableEntry | not-accessible | current | A list of objects for individual clocks. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.1 | ColumnmbgClkTableIndex | not-accessible | current | Specifies index for a RefClock Table. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.2 | ColumnmbgClkType | read-only | current | Type of the Refclock. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.3 | ColumnmbgClkSerialNo | read-only | current | Serial Number of the Refclock. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.4 | ColumnmbgClkFirmwareRev | read-only | current | Firmware Version of the Refclock. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.5 | ColumnmbgGpsState | read-only | current | Current state of GPS refclock as value 0: not available 1: synchronized 2: not synchronized |
| 1.3.6.1.4.1.5597.80.1 | NodembgMDU | |||
| 1.3.6.1.4.1.5597.80.1.1 | ScalarmbgMDUType | read-only | current | Type of clock |
| 1.3.6.1.4.1.5597.80.1.2 | ScalarmbgMDUSerialNo | read-only | current | MDU serial number |
| 1.3.6.1.4.1.5597.80.1.3 | ScalarmbgMDUFirmwareRev | read-only | current | MDU firmware version |
| 1.3.6.1.4.1.5597.80.1.4 | ScalarmbgMDUMasterVal | read-write | current | Current selected masterclock of switchcard as value 0: no master selected (outputs disabled) 1: GPS clock 1 is master 2: GPS clock 2 is master |
| 1.3.6.1.4.1.5597.80.1.5 | ScalarmbgMDULocalRemote | read-write | current | Current masterselect mode of GPS switchcard as value 0: local masterselect 1: remote masterselect |
| 1.3.6.1.4.1.5597.80.1.6 | ScalarmbgTrapIPAddress | read-write | current | Trap receiver IP address. |
| 1.3.6.1.4.1.5597.80.1.7 | ScalarmbgMDUSyncStatusClk1 | read-only | current | Current time sync status of clk 1 0: not synchronized 1: synchronized |
| 1.3.6.1.4.1.5597.80.1.8 | ScalarmbgMDUSyncStatusClk2 | read-only | current | Current time sync status of clk 2 0: not synchronized 1: synchronized |
| 1.3.6.1.4.1.5597.80.1.9 | ScalarmbgMDUOutputStatus | read-only | current | Current state of outputs (0=outputs disabled, 1=outputs enabled) |
| 1.3.6.1.4.1.5597.80.1.10 | ScalarmbgMDUACOMode | read-only | current | Current state of ACO (access control override) 0: ACO mode off (no firmware updates, password protection and encryption on) 1: ACO mode on (firmware updates po… |
| 1.3.6.1.4.1.5597.80.1.11 | ScalarmbgMDUPowerSupply1 | read-only | current | Current status of power supply 1 0: notOK 1: OK |
| 1.3.6.1.4.1.5597.80.1.12 | ScalarmbgMDUPowerSupply2 | read-only | current | Current status of power supply 2 0: notOK 1: OK |
| 1.3.6.1.4.1.5597.80.1.13 | ScalarmbgMDUPowerSupply3 | read-only | current | Current status of power supply 3 0: notOK 1: OK |
| 1.3.6.1.4.1.5597.80.1.14 | ScalarmbgMDUPowerSupply4 | read-only | current | Current status of power supply 4 0: notOK 1: OK |
| 1.3.6.1.4.1.5597.80.1.15 | ScalarmbgMDUTemp | read-only | current | MDU temperature |
| 1.3.6.1.4.1.5597.80.1.16 | ScalarmbgMDUSlot1 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.17 | ScalarmbgMDUSlot2 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.18 | ScalarmbgMDUSlot3 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.19 | ScalarmbgMDUSlot4 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.20 | ScalarmbgMDUSlot5 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.21 | ScalarmbgMDUSlot6 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.22 | ScalarmbgMDUSlot7 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.23 | ScalarmbgMDUSlot8 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.24 | ScalarmbgMDUSlot9 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.25 | ScalarmbgMDUSlot10 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.26 | ScalarmbgMDUSlot11 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.27 | ScalarmbgMDUSlot12 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.28 | ScalarmbgMDUSlot13 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.29 | ScalarmbgMDUSlot14 | read-only | current | IO Module |
| 1.3.6.1.4.1.5597.80.1.30 | ScalarmbgMDUClk1 | read-only | current | Clk Module |
| 1.3.6.1.4.1.5597.80.1.31 | ScalarmbgMDUClk2 | read-only | current | Clk Module |
| 1.3.6.1.4.1.5597.80.2 | NodembgTrapRoot | |||
| 1.3.6.1.4.1.5597.80.2.0 | NodembgTraps | |||
| 1.3.6.1.4.1.5597.80.2.0.1 | NotificationmbgColdBootTrap | current | The trap is sent when a Refclock is in the Cold Boot mode. | |
| 1.3.6.1.4.1.5597.80.2.0.2 | NotificationmbgWarmBootTrap | current | The trap is sent when a Refclock is in the Warm Boot mode. | |
| 1.3.6.1.4.1.5597.80.2.0.3 | NotificationmbgGPSNavSolvedTrap | current | The trap is sent when a Refclock calculated its actual position. | |
| 1.3.6.1.4.1.5597.80.2.0.4 | NotificationmbgGPSReceiverNotRespondingTrap | current | The trap is sent when a GPS receiver is not responding. | |
| 1.3.6.1.4.1.5597.80.2.0.5 | NotificationmbgGPSReceiverNotSyncTrap | current | The trap is sent when a GPS receiver is not synchronised. | |
| 1.3.6.1.4.1.5597.80.2.0.6 | NotificationmbgGPSAntennaFaultyTrap | current | The trap is sent when a connection to an antenna is lost. | |
| 1.3.6.1.4.1.5597.80.2.0.7 | NotificationmbgGPSAntennaReconnectTrap | current | The trap is sent when an antenna has been reconnected. | |
| 1.3.6.1.4.1.5597.80.2.0.8 | NotificationmbgSCUBootTrap | current | The trap is sent when SCU has been rebooted. | |
| 1.3.6.1.4.1.5597.80.2.0.9 | NotificationmbgLeapSecondAnnouncedTrap | current | The trap is sent when a leap second has been announced. | |
| 1.3.6.1.4.1.5597.80.2.0.10 | NotificationmbgMasterclockSwitchoverTrap | current | The trap is sent when a masterclock changes. | |
| 1.3.6.1.4.1.5597.80.2.0.11 | NotificationmbgPowerSupplyFailureTrap | current | The trap is sent when a power supply unit fails. | |
| 1.3.6.1.4.1.5597.80.2.0.12 | NotificationmbgPowerSupplyOKTrap | current | The trap is sent when a power supply unit restores its operation. | |
| 1.3.6.1.4.1.5597.80.2.0.13 | NotificationmbgHighTempTrap | current | The trap is sent when the SCU temperature is over 85 degrees Celsius. | |
| 1.3.6.1.4.1.5597.80.2.0.99 | NotificationmbgTestNotificationTrap | current | The trap is sent when a test notification has been requested. | |
| 1.3.6.1.4.1.5597.80.90 | NodembgRSC180Conformance | |||
| 1.3.6.1.4.1.5597.80.90.1 | NodembgRSC180Compliances | |||
| 1.3.6.1.4.1.5597.80.90.1.1 | CompliancembgRSC180Compliance | current | The compliance statement for SNMP entities which implement version 2 of the RSC180 MIB | |
| 1.3.6.1.4.1.5597.80.90.2 | NodembgRSC180Groups | |||
| 1.3.6.1.4.1.5597.80.90.2.1 | GroupmbgRSC180ObjectsGroup | current | The collection of objects for the RSC180 MIB | |
| 1.3.6.1.4.1.5597.80.90.2.2 | GroupmbgRSC180TrapsGroup | current | The collection of traps for the MBG RSC180 MIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MeinbergRefClockTyp | INTEGER { notAvailable(0), gps166(1), gps167(2), gps167SV(3), gps167PC(4), gps167PCI(5), gps163(6), gps168PCI(7), gps161(8), gps169PCI(9), tcr167PCI(10), gps164(11), gps170PCI(12), pzf511(13), gps170(14), tcr511(15), am511(16), msf511(17), grc170(18), gps170PEX(19), gps162(20), ptp270PEX(21), frc511PEX(22), gen170(23), tcr170PEX(24), wwvb511(25), mbg170(26), jjy511(27), pzf600(28), tcr600(29), gps180(30), gln170(31), gps180PEX(32), tcr180PEX(33), pzf180PEX(34), mbg180(35), msf600(36), wwvb600(37), jjy600(38), gps180HS(39), gps180AMC(40), esi180(41), cpe180(42), lno180(43), grc180(44), liu(45), dcf600HS(46), dcf600RS(47), mri(48), bpe(49), gln180pex(50), n2x(51), rsc180(52), lne_gb(53), Ppg180(54), scg(55), mdu300(56), sdi(57), fdm180(58), spt(59), pzf180(60), rel1000(61), hps100(62), vsg180(63), msf180(64), wwvb180(65), cpc180(66), ctc100(67), tcr180(68), lue180(69), cpc_01(70), tsu_01(71), cmc_01(72), scu_01(73), fcu_01(74), csm100(75), lne180sfp(76), gts180(77), gps180csm(78), grc181(79), n2x180(80), grc181PEX(81), mdu180(82), mdu312(83), gps165(84), gns181_uc(85), psx_4ge(86), rsc180rdu(87) } | current | indicates different Ref and MDU types |