MBG-SNMP-RSC180-MIB
78 objects
Top-level infrastructure of the MBG-SNMP project enterprise MIB tree
Imported Objects
| MBG-SNMP-ROOT-MIB | mbgSnmpRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5597.80 | IdentitymbgRSC180 | Top-level infrastructure of the MBG-SNMP project enterprise MIB tree | ||
| 1.3.6.1.4.1.5597.80.0 | NodembgRefClock | |||
| 1.3.6.1.4.1.5597.80.0.0 | NodembgRefClockStatus | |||
| 1.3.6.1.4.1.5597.80.0.0.1 | TablembgRefClockTable | not-accessible | current | A table of content for individual clocks. |
| 1.3.6.1.4.1.5597.80.0.0.1.1 | RowmbgRefClockTableEntry | not-accessible | current | A list of objects for individual clocks. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.1 | ColumnmbgClkTableIndex | not-accessible | current | Specifies index for a RefClock Table. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.2 | ColumnmbgClkType | read-only | current | Type of the Refclock. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.3 | ColumnmbgClkSerialNo | read-only | current | Serial Number of the Refclock. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.4 | ColumnmbgClkFirmwareRev | read-only | current | Firmware Version of the Refclock. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.5 | ColumnmbgClkMode | read-only | current | Current Mode of refclock as value 0: not available 1: Normal Operation 2: Tracking/Searching 3: Antenna Faulty 4: Warm Boot 5: Cold Boot |
| 1.3.6.1.4.1.5597.80.0.0.1.1.6 | ColumnmbgGpsState | read-only | current | Current state of GPS refclock as value 0: not available 1: synchronized 2: not synchronized |
| 1.3.6.1.4.1.5597.80.0.0.1.1.7 | ColumnmbgGpsPosition | read-only | current | Current Position of a GPS refclock. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.8 | ColumnmbgGpsSatellitesGood | read-only | current | Current good Satellites of GPS refclock as value. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.9 | ColumnmbgGpsSatellitesInView | read-only | current | Current satellites in view of GPS refclock as value. |
| 1.3.6.1.4.1.5597.80.0.0.1.1.10 | ColumnmbgGPSNavSolved | read-only | current | Refclock calculated new position 0: no 1: yes |
| 1.3.6.1.4.1.5597.80.0.0.1.1.11 | ColumnmbgLeapSecond | read-only | current | Information about a leap second. |
| 1.3.6.1.4.1.5597.80.1 | NodembgSCU | |||
| 1.3.6.1.4.1.5597.80.1.1 | ScalarmbgSCUType | read-only | current | Type of clock |
| 1.3.6.1.4.1.5597.80.1.2 | ScalarmbgSCUSerialNo | read-only | current | SCU serial number |
| 1.3.6.1.4.1.5597.80.1.3 | ScalarmbgSCUFirmwareRev | read-only | current | SCU firmware version |
| 1.3.6.1.4.1.5597.80.1.4 | ScalarmbgSCUMasterVal | read-write | current | Current selected masterclock of switchcard as value 0: no master selected (outputs disabled) 1: GPS clock 1 is master 2: GPS clock 2 is master |
| 1.3.6.1.4.1.5597.80.1.5 | ScalarmbgSCULocalRemote | read-write | current | Current masterselect mode of GPS switchcard as value 0: local masterselect 1: remote masterselect |
| 1.3.6.1.4.1.5597.80.1.6 | ScalarmbgTrapIPAddress | read-write | current | Trap receiver IP address. |
| 1.3.6.1.4.1.5597.80.1.7 | ScalarmbgSCUSyncStatusClk1 | read-only | current | Current time sync status of clk 1 0: not synchronized 1: synchronized |
| 1.3.6.1.4.1.5597.80.1.8 | ScalarmbgSCUSyncStatusClk2 | read-only | current | Current time sync status of clk 2 0: not synchronized 1: synchronized |
| 1.3.6.1.4.1.5597.80.1.9 | ScalarmbgSCUOutputStatus | read-only | current | Current state of outputs (0=outputs disabled, 1=outputs enabled) |
| 1.3.6.1.4.1.5597.80.1.10 | ScalarmbgSCUACOMode | read-only | current | Current state of ACO (access control override) 0: ACO mode off (no firmware updates, password protection and encryption on) 1: ACO mode on (firmware updates po… |
| 1.3.6.1.4.1.5597.80.1.11 | ScalarmbgSCUPowerSupply1 | read-only | current | Current status of power supply clk 1 0: notOK 1: OK |
| 1.3.6.1.4.1.5597.80.1.12 | ScalarmbgSCUPowerSupply2 | read-only | current | Current status of power supply clk 2 0: notOK 1: OK |
| 1.3.6.1.4.1.5597.80.1.13 | ScalarmbgSCUTemp | read-only | current | SCU temperature |
| 1.3.6.1.4.1.5597.80.1.14 | ScalarmbgSCUOutp1 | read-only | current | SCU output 1 |
| 1.3.6.1.4.1.5597.80.1.15 | ScalarmbgSCUOutp2 | read-only | current | SCU output 2 |
| 1.3.6.1.4.1.5597.80.1.16 | ScalarmbgSCUOutp3 | read-only | current | SCU output 3 |
| 1.3.6.1.4.1.5597.80.1.17 | ScalarmbgSCUOutp4 | read-only | current | SCU output 4 |
| 1.3.6.1.4.1.5597.80.1.18 | ScalarmbgSCUOutp5 | read-only | current | SCU output 5 |
| 1.3.6.1.4.1.5597.80.1.19 | ScalarmbgSCUOutp6 | read-only | current | SCU output 6 |
| 1.3.6.1.4.1.5597.80.1.20 | ScalarmbgSCUOutp7 | read-only | current | SCU output 7 |
| 1.3.6.1.4.1.5597.80.1.21 | ScalarmbgSCUOutp8 | read-only | current | SCU output 8 |
| 1.3.6.1.4.1.5597.80.1.22 | ScalarmbgSCUOutp9 | read-only | current | SCU output 9 |
| 1.3.6.1.4.1.5597.80.1.23 | ScalarmbgSCUOutp10 | read-only | current | SCU output 10 |
| 1.3.6.1.4.1.5597.80.1.24 | ScalarmbgSCUOutp11 | read-only | current | SCU output 11 |
| 1.3.6.1.4.1.5597.80.1.25 | ScalarmbgSCUOutp12 | read-only | current | SCU output 12 |
| 1.3.6.1.4.1.5597.80.1.26 | ScalarmbgSCUOutp13 | read-only | current | SCU output 13 |
| 1.3.6.1.4.1.5597.80.1.27 | ScalarmbgSCUOutp14 | read-only | current | SCU output 14 |
| 1.3.6.1.4.1.5597.80.1.28 | ScalarmbgSCUOutp15 | read-only | current | SCU output 15 |
| 1.3.6.1.4.1.5597.80.1.29 | ScalarmbgSCUOutp16 | read-only | current | SCU output 16 |
| 1.3.6.1.4.1.5597.80.1.30 | ScalarmbgSCUInp1 | read-only | current | SCU input 1 |
| 1.3.6.1.4.1.5597.80.1.31 | ScalarmbgSCUInp2 | read-only | current | SCU input 2 |
| 1.3.6.1.4.1.5597.80.1.32 | ScalarmbgSCUSupl1 | read-only | current | SCU supply 1 |
| 1.3.6.1.4.1.5597.80.1.33 | ScalarmbgSCUSupl2 | read-only | current | SCU supply 2 |
| 1.3.6.1.4.1.5597.80.1.34 | ScalarmbgSCUSupl3 | read-only | current | SCU supply 3 |
| 1.3.6.1.4.1.5597.80.1.35 | ScalarmbgSCUSupl4 | read-only | current | SCU supply 4 |
| 1.3.6.1.4.1.5597.80.1.36 | ScalarmbgSCUtimeDiff | read-only | current | SCU time differnce of the clocks |
| 1.3.6.1.4.1.5597.80.1.37 | ScalarmbgSCUAutoManual | read-only | current | Displays the position of the auto/manual switch on the front of the device as value 0: manual 1: auto |
| 1.3.6.1.4.1.5597.80.1.38 | ScalarmbgSCUDum1 | read-only | current | SCU dummy function |
| 1.3.6.1.4.1.5597.80.2 | NodembgTrapRoot | |||
| 1.3.6.1.4.1.5597.80.2.0 | NodembgTraps | |||
| 1.3.6.1.4.1.5597.80.2.0.1 | NotificationmbgColdBootTrap | current | The trap is sent when a Refclock is in the Cold Boot mode. | |
| 1.3.6.1.4.1.5597.80.2.0.2 | NotificationmbgWarmBootTrap | current | The trap is sent when a Refclock is in the Warm Boot mode. | |
| 1.3.6.1.4.1.5597.80.2.0.3 | NotificationmbgGPSNavSolvedTrap | current | The trap is sent when a Refclock calculated its actual position. | |
| 1.3.6.1.4.1.5597.80.2.0.4 | NotificationmbgGPSReceiverNotRespondingTrap | current | The trap is sent when a GPS receiver is not responding. | |
| 1.3.6.1.4.1.5597.80.2.0.5 | NotificationmbgGPSReceiverNotSyncTrap | current | The trap is sent when a GPS receiver is not synchronised. | |
| 1.3.6.1.4.1.5597.80.2.0.6 | NotificationmbgGPSAntennaFaultyTrap | current | The trap is sent when a connection to an antenna is lost. | |
| 1.3.6.1.4.1.5597.80.2.0.7 | NotificationmbgGPSAntennaReconnectTrap | current | The trap is sent when an antenna has been reconnected. | |
| 1.3.6.1.4.1.5597.80.2.0.8 | NotificationmbgSCUBootTrap | current | The trap is sent when SCU has been rebooted. | |
| 1.3.6.1.4.1.5597.80.2.0.9 | NotificationmbgLeapSecondAnnouncedTrap | current | The trap is sent when a leap second has been announced. | |
| 1.3.6.1.4.1.5597.80.2.0.10 | NotificationmbgMasterclockSwitchoverTrap | current | The trap is sent when a masterclock changes. | |
| 1.3.6.1.4.1.5597.80.2.0.11 | NotificationmbgPowerSupplyFailureTrap | current | The trap is sent when a power supply unit fails. | |
| 1.3.6.1.4.1.5597.80.2.0.12 | NotificationmbgPowerSupplyOKTrap | current | The trap is sent when a power supply unit restores its operation. | |
| 1.3.6.1.4.1.5597.80.2.0.13 | NotificationmbgHighTempTrap | current | The trap is sent when the SCU temperature is over 85 degrees Celsius. | |
| 1.3.6.1.4.1.5597.80.2.0.99 | NotificationmbgTestNotificationTrap | current | The trap is sent when a test notification has been requested. | |
| 1.3.6.1.4.1.5597.80.90 | NodembgRSC180Conformance | |||
| 1.3.6.1.4.1.5597.80.90.1 | NodembgRSC180Compliances | |||
| 1.3.6.1.4.1.5597.80.90.1.1 | CompliancembgRSC180Compliance | current | The compliance statement for SNMP entities which implement version 2 of the RSC180 MIB | |
| 1.3.6.1.4.1.5597.80.90.2 | NodembgRSC180Groups | |||
| 1.3.6.1.4.1.5597.80.90.2.1 | GroupmbgRSC180ObjectsGroup | current | The collection of objects for the RSC180 MIB | |
| 1.3.6.1.4.1.5597.80.90.2.2 | GroupmbgRSC180TrapsGroup | current | The collection of traps for the MBG RSC180 MIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MeinbergRefClockTyp | INTEGER { notAvailable(0), gps166(1), gps167(2), gps167SV(3), gps167PC(4), gps167PCI(5), gps163(6), gps168PCI(7), gps161(8), gps169PCI(9), tcr167PCI(10), gps164(11), gps170PCI(12), pzf511(13), gps170(14), tcr511(15), am511(16), msf511(17), grc170(18), gps170PEX(19), gps162(20), ptp270PEX(21), frc511PEX(22), gen170(23), tcr170PEX(24), wwvb511(25), mbg170(26), jjy511(27), pzf600(28), tcr600(29), gps180(30), gln170(31), gps180PEX(32), tcr180PEX(33), pzf180PEX(34), mbg180(35), msf600(36), wwvb600(37), jjy600(38), gps180HS(39), gps180AMC(40), esi180(41), cpe180(42), lno180(43), grc180(44), liu(45), dcf600HS(46), dcf600RS(47), mri(48), bpe(49), gln180pex(50), n2x(51), rsc180(52) } | current | indicates different Ref and SCU types |