MCAST-VPN-MIB
88 objects
This MIB contains managed object definitions for multicast in BGP/MPLS IP VPNs defined by [MVPN]. Copyright (C) The Internet Society (2012).
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| IPMROUTE-STD-MIB | ipMRouteEntry |
| JUNIPER-SMI | -- Juniper specific jnxMibs |
| L2L3-VPN-MCAST-MIB | JnxL2L3VpnMcastProviderTunnelType |
| MPLS-TC-STD-MIB | MplsLabel |
| MPLS-VPN-MIB | MplsVpnRouteDistinguisher mplsVpnVrfName |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.5.12.1 | IdentityjnxMvpnMIB | This MIB contains managed object definitions for multicast in BGP/MPLS IP VPNs defined by [MVPN]. Copyright (C) The Internet Society (2012). | ||
| 1.3.6.1.4.1.2636.5.12.1.0 | NodejnxMvpnNotifications | |||
| 1.3.6.1.4.1.2636.5.12.1.0.2 | NotificationjnxMvpnMvrfChange | current | A mvpnMvrfChange notification signifies a change about a MVRF in the device. The change event can be creation of the MVRF, deletion of the MVRF or an update on… | |
| 1.3.6.1.4.1.2636.5.12.1.1 | NodejnxMvpnObjects | |||
| 1.3.6.1.4.1.2636.5.12.1.1.1 | NodejnxMvpnScalars | |||
| 1.3.6.1.4.1.2636.5.12.1.1.1.1 | ScalarjnxMvpnMvrfNumber | read-only | current | The number of MVRFs for IPv4 or IPv6 or mLDP C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.2 | ScalarjnxMvpnMvrfNumberV4 | read-only | current | The number of MVRFs for IPv4 C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.3 | ScalarjnxMvpnMvrfNumberV6 | read-only | current | The number of MVRFs for IPv6 C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.4 | ScalarjnxMvpnMvrfNumberPimV4 | read-only | current | The number of PIM-MVPN MVRFs for IPv4 C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.5 | ScalarjnxMvpnMvrfNumberPimV6 | read-only | current | The number of PIM-MVPN MVRFs for IPv6 C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.6 | ScalarjnxMvpnMvrfNumberBgpV4 | read-only | current | The number of BGP-MVPN MVRFs for IPv4 C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.7 | ScalarjnxMvpnMvrfNumberBgpV6 | read-only | current | The number of BGP-MVPN MVRFs for IPv6 C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.8 | ScalarjnxMvpnMvrfNumberMldp | read-only | current | The number of BGP-MVPN MVRFs for mLDP C-Multicast that are present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.1.9 | ScalarjnxMvpnNotificationEnable | read-only | current | If this object is TRUE, then the generation of all notifications defined in this MIB is enabled. |
| 1.3.6.1.4.1.2636.5.12.1.1.2 | NodejnxMvpnGeneral | |||
| 1.3.6.1.4.1.2636.5.12.1.1.2.1 | TablejnxMvpnGeneralTable | not-accessible | current | This table specifies the general information about the MVRFs present in this device. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1 | RowjnxMvpnGeneralEntry | not-accessible | current | An entry in this table is created for every MVRF in the device. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.1 | ColumnjnxMvpnGenOperStatusChange | read-only | current | This object describes the last operational change that happened for the given MVRF. createdMvrf - indicates that the MVRF was created in the device. deletedMvr… |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.2 | ColumnjnxMvpnGenOperChangeTime | read-only | current | The time at which the last operational change for the MVRF in question took place. The last operational change is specified by mvpnGenOperStatusChange. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.3 | ColumnjnxMvpnGenCmcastRouteProtocolV4 | read-only | current | Protocol used to signal IPv4 C-multicast states across the provider core. pim(1): PIM (PIM-MVPN). bgp(2): BGP (BGP-MVPN). |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.4 | ColumnjnxMvpnGenCmcastRouteProtocolV6 | read-only | current | Protocol used to signal IPv6 C-multicast states across the provider core. pim(1): PIM (PIM-MVPN). bgp(2): BGP (BGP-MVPN). |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.5 | ColumnjnxMvpnGenIpmsiConfigV4 | read-only | current | This points to a row in MvpnPmsiConfigTable, for I-PMSI configuration for IPv4. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.6 | ColumnjnxMvpnGenIpmsiConfigV6 | read-only | current | This points to a row in MvpnPmsiConfigTable, for I-PMSI configuration for IPv6. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.7 | ColumnjnxMvpnGenInterAsPmsiConfigV4 | read-only | current | This points to a row in MvpnPmsiConfigTable, for inter-as I-PMSI configuration for IPv4, in case of segmented inter-as provider tunnels. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.8 | ColumnjnxMvpnGenInterAsPmsiConfigV6 | read-only | current | This points to a row in MvpnPmsiConfigTable, for inter-as I-PMSI configuration for IPv6, in case of segmented inter-as provider tunnels. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.1.1.9 | ColumnjnxMvpnGenRowStatus | read-only | current | This is used to create or delete a row in this table. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2 | TablejnxMvpnBgpGeneralTable | not-accessible | current | This table augments the mvpnGeneralTable and is for BGP-MVPN specific information. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2.1 | RowjnxMvpnBgpGeneralEntry | not-accessible | current | The mvpnBgpGeneralEntry matches and augments an mvpnGeneralEntry for a BGP-MVPN instance, with BGP-MVPN specific informatoin. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2.1.1 | ColumnjnxMvpnBgpGenMode | read-only | current | For two different BGP-MVPN modes: rpt-spt(1): intersite-site shared tree mode spt-only(2): inter-site source-only tree mode. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2.1.2 | ColumnjnxMvpnBgpGenUmhSelection | read-only | current | The UMH selection method for this mvpn, as specified in section 5.1.3 of [MVPN]: highest-pe-address (1): PE with the highest address c-root-group-hashing (2): … |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2.1.3 | ColumnjnxMvpnBgpGenSiteType | read-only | current | Whether this site is a receiver-only site or not. sender-receiver (1): both sender and receiver site. receiver-only (2): receiver-only site. sender-only (3): s… |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2.1.4 | ColumnjnxMvpnBgpGenCmcastImportRt | read-only | current | The C-multicast Import RT that this device adds to unicast vpn routes that it advertises for this mvpn. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2.1.5 | ColumnjnxMvpnBgpGenSrcAs | read-only | current | The Source AS number in Source AS Extended Community that this device adds to the unicast vpn routes that it advertises for this mvpn. |
| 1.3.6.1.4.1.2636.5.12.1.1.2.2.1.6 | ColumnjnxMvpnBgpGenSptnlLimit | read-only | current | The max number of selective provider tunnels this device allows for this mvpn. |
| 1.3.6.1.4.1.2636.5.12.1.1.3 | NodejnxMvpnConfig | |||
| 1.3.6.1.4.1.2636.5.12.1.1.3.1 | TablejnxMvpnPmsiConfigTable | not-accessible | current | This table specifies the configured PMSIs. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1 | RowjnxMvpnPmsiConfigEntry | not-accessible | current | An entry in this table is created for each PMSI configured on this router. It can be referred to by either I-PMSI configuration (in mvpnGeneralEntry) or S-PMSI… |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1.1 | ColumnjnxMvpnPmsiConfigTunnelType | not-accessible | current | Type of tunnel used to instantiate the PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1.2 | ColumnjnxMvpnPmsiConfigTunnelAuxInfo | not-accessible | current | Additional tunnel information depending on the type. pim: In case of S-PMSI, number of groups starting at mvpnPmsiConfigTunnelPimGroupAddress. This allows a ra… |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1.3 | ColumnjnxMvpnPmsiConfigTunnelPimGroupAddressType | not-accessible | current | In case of PIM provider tunnel, the type of tunnel address. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1.4 | ColumnjnxMvpnPmsiConfigTunnelPimGroupAddress | not-accessible | current | In case of PIM provider tunnel, the provider tunnel address. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1.5 | ColumnjnxMvpnPmsiConfigTunnelOrTemplateName | not-accessible | current | The tunnel name or template name used to create tunnels. Depending on mvpnPmsiConfigTunnelType and mvpnPmsiConfigTunnelAuxInfo: dynamically created rsvp-p2mp t… |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1.6 | ColumnjnxMvpnPmsiConfigEncapsType | read-only | current | The encapsulation type to be used, in case of PIM tunnel or ingress-replication. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.1.1.7 | ColumnjnxMvpnPmsiConfigRowStatus | read-only | current | Used to create/modify/delete a row in this table. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2 | TablejnxMvpnSpmsiConfigTable | not-accessible | current | This table specifies S-PMSI configuration. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1 | RowjnxMvpnSpmsiConfigEntry | not-accessible | current | An entry is created for each S-PMSI configuration. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.1 | ColumnjnxMvpnSpmsiConfigCmcastAddressType | not-accessible | current | Type of C-multicast address |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.2 | ColumnjnxMvpnSpmsiConfigCmcastGroupAddress | not-accessible | current | C-multicast group address |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.3 | ColumnjnxMvpnSpmsiConfigCmcastGroupPrefixLen | not-accessible | current | C-multicast group address prefix length. A group 0 (or ::0) with prefix length 32 (or 128) indicates wildcard group, while a group 0 (or ::0) with prefix lengt… |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.4 | ColumnjnxMvpnSpmsiConfigCmcastSourceAddress | not-accessible | current | C-multicast source address |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.5 | ColumnjnxMvpnSpmsiConfigCmcastSourcePrefixLen | read-only | current | C-multicast source address prefix length. A source 0 (or ::0) with prefix length 32 (or 128) indicates a wildcard source, while a source 0 (or ::0) with prefix… |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.6 | ColumnjnxMvpnSpmsiConfigThreshold | read-only | current | The bandwidth threshold value which when exceeded for a multicast routing entry in the given MVRF, triggers usage of S-PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.7 | ColumnjnxMvpnSpmsiConfigPmsiPointer | read-only | current | This points to a row in MvpnPmsiConfigTable, to specify tunnel attributes. |
| 1.3.6.1.4.1.2636.5.12.1.1.3.2.1.8 | ColumnjnxMvpnSpmsiConfigRowStatus | read-only | current | Used to create/modify/delete a row in this table. |
| 1.3.6.1.4.1.2636.5.12.1.1.4 | NodejnxMvpnStates | |||
| 1.3.6.1.4.1.2636.5.12.1.1.4.1 | TablejnxMvpnIpmsiTable | not-accessible | current | This table is for all advertised/received I-PMSI advertisements. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.1.1 | RowjnxMvpnIpmsiEntry | not-accessible | current | An entry in this table corresponds to an I-PMSI advertisement that is advertised/received on this router. This represents all the sender PEs in the MVPN, with … |
| 1.3.6.1.4.1.2636.5.12.1.1.4.1.1.1 | ColumnjnxMvpnIpmsiAfi | not-accessible | current | The address family this I-PMSI is for. 1 - IPv4 2 - IPv6 |
| 1.3.6.1.4.1.2636.5.12.1.1.4.1.1.2 | ColumnjnxMvpnIpmsiRD | not-accessible | current | The Route Distinguisher in this I-PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.1.1.3 | ColumnjnxMvpnIpmsiOrigAddrType | not-accessible | current | The Internet address type of mvpnIpmsiOrigAddress. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.1.1.4 | ColumnjnxMvpnIpmsiOrigAddress | not-accessible | current | The BGP address of the device that originated the I-PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.1.1.5 | ColumnjnxMvpnIpmsiUpTime | read-only | current | The time since this I-PMSI was first advertised/received by the device. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.1.1.6 | ColumnjnxMvpnIpmsiAttribute | read-only | current | Points to a row in the mvpnPmsiTunnelAttributeTable. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.2 | TablejnxMvpnInterasIpmsiTable | not-accessible | current | This table is for all advertised/received inter-as I-PMSI advertisements. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.2.1 | RowjnxMvpnInterasIpmsiEntry | not-accessible | current | An entry in this table corresponds to an inter-as I-PMSI advertisement that is advertised/received on this router. This represents all the ASes in the MVPN, wi… |
| 1.3.6.1.4.1.2636.5.12.1.1.4.2.1.1 | ColumnjnxMvpnInterasIpmsiAfi | not-accessible | current | The address family this I-PMSI is for. 1 - IPv4 2 - IPv6 |
| 1.3.6.1.4.1.2636.5.12.1.1.4.2.1.2 | ColumnjnxMvpnInterasIpmsiRD | not-accessible | current | The Route Distinguisher in this inter-as I-PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.2.1.3 | ColumnjnxMvpnInterasIpmsiSrcAs | not-accessible | current | The source-as in this inter-as I-PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.2.1.4 | ColumnjnxMvpnInterasIpmsiAttribute | read-only | current | Points to a row in the mvpnPmsiTunnelAttributeTable. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3 | TablejnxMvpnSpmsiTable | not-accessible | current | This table has information about the S-PMSIs sent/received by a device. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1 | RowjnxMvpnSpmsiEntry | not-accessible | current | An entry in this table is created or updated for every S-PMSI advertised/received in a particular MVRF. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.1 | ColumnjnxMvpnSpmsiOrigAddrType | not-accessible | current | The Internet address type of mvpnSpmsiOrigAddress. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.2 | ColumnjnxMvpnSpmsiOrigAddress | not-accessible | current | The BGP address of the device that originated the S-PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.3 | ColumnjnxMvpnSpmsiCmcastAddrType | not-accessible | current | The Internet address type of mvpnSpmsiCmcastGroup/Source. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.4 | ColumnjnxMvpnSpmsiCmcastGroup | not-accessible | current | S-PMSI C-multicast group address. If it is 0 (or ::0), this is a wildcard group, and mvpnSpmsiCmcastGroupPrefixLen must be 32 (or 128). |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.5 | ColumnjnxMvpnSpmsiCmcastGroupPrefixLen | not-accessible | current | S-PMSI C-multicast group address prefix length. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.6 | ColumnjnxMvpnSpmsiCmcastSource | not-accessible | current | S-PMSI C-multicast source address If it is 0 (or ::0), this is a wildcard source, and mvpnSpmsiCmcastSourcePrefixLen must be 32 (or 128). |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.7 | ColumnjnxMvpnSpmsiCmcastSourcePrefixLen | not-accessible | current | S-PMSI C-multicast source address prefix length. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.8 | ColumnjnxMvpnSpmsiTunnelAttribute | read-only | current | A row pointer to the mvpnPmsiTunnelAttributeTable |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.9 | ColumnjnxMvpnSpmsiUpTime | read-only | current | The time since this S-PMSI was first advertised/received by the device. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.10 | ColumnjnxMvpnSpmsiExpTime | read-only | current | For UDP-based S-PMSI signaling for PIM-MVPN, the amount of time remaining before this received S-PMSI Join Message expires, or the next S-PMSI Join Message ref… |
| 1.3.6.1.4.1.2636.5.12.1.1.4.3.1.11 | ColumnjnxMvpnSpmsiRefCnt | read-only | current | The number of c-multicast routes that are mapped to this S-PMSI. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.4 | TablejnxMvpnMrouteTable | not-accessible | current | This table augments ipMcastRouteTable, to provide some MVPN specific information. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.4.1 | RowjnxMvpnMrouteEntry | not-accessible | current | The mvpnMrouteEntry matches and augments an ipMcastRouteTable, with MVPN specific information, such as PMSI used. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.4.1.1 | ColumnjnxMvpnMroutePmsiPointer | read-only | current | The I-PMSI or S-PMSI this C-multicast route is using. This is important because an implementation may not have an interface corresponding to a provider tunnel,… |
| 1.3.6.1.4.1.2636.5.12.1.1.4.4.1.2 | ColumnjnxMvpnMrouteNumberOfLocalReplication | read-only | current | Number of replications to local receivers. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.4.1.3 | ColumnjnxMvpnMrouteNumberOfRemoteReplication | read-only | current | Number of (local) replications to remote receivers. |
| 1.3.6.1.4.1.2636.5.12.1.1.4.4.1.4 | ColumnjnxMvpnMrouteDataRate | read-only | current | The data rate for traffic following this route. |