ME1200-ERPS-MIB
127 objects
Private MIB for Ethernet Ring Protection Switching, ERPS.
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| ME1200-TC | ME1200InterfaceIndex ME1200RowEditorState ME1200VlanListQuarter |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.72 | Identityme1200ErpsMib | Private MIB for Ethernet Ring Protection Switching, ERPS. | ||
| 1.3.6.1.4.1.9.9.815.1.72.1 | Nodeme1200ErpsMIBObjects | |||
| 1.3.6.1.4.1.9.9.815.1.72.1.1 | Nodeme1200ErpsCapabilities | |||
| 1.3.6.1.4.1.9.9.815.1.72.1.1.1 | Scalarme1200ErpsCapabilitiesMaxGroups | read-only | current | Maximum number of configured ERPS groups. |
| 1.3.6.1.4.1.9.9.815.1.72.1.1.2 | Scalarme1200ErpsCapabilitiesMaxVlansPerGroup | read-only | current | Maximum number of protected VLANS per ERPS group. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2 | Nodeme1200ErpsConfig | |||
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1 | Tableme1200ErpsConfigTable | not-accessible | current | This is the ERPS group configuration table. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1 | Rowme1200ErpsConfigEntry | not-accessible | current | Each entry in this table represents an ERPS group. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.1 | Columnme1200ErpsConfigGroupIndex | not-accessible | current | ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.2 | Columnme1200ErpsConfigRingType | read-write | current | Type of ring. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.3 | Columnme1200ErpsConfigPort0 | read-write | current | ifindex of ring protection port 0. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.4 | Columnme1200ErpsConfigPort1 | read-write | current | ifindex of ring protection Port 1. For interconnected sub-rings this value must be zero. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.5 | Columnme1200ErpsConfigInterconnectMajorRingGroupIndex | read-write | current | For sub-ring: zero = not interconnected; > zero = index of major ring group. For major ring: zero = not interconnected; > zero = is interconnected (i.e flag-li… |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.6 | Columnme1200ErpsConfigVirtualChannel | read-write | current | Whether to use a virtual channel. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.7 | Columnme1200ErpsConfigPort0SignalFailMepIndex | read-write | current | Index of SignalFail MEP for Port 0. Zero if not set. To clear an ERPS group's MEP association, set this to zero; it affects all MEP indices. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.8 | Columnme1200ErpsConfigPort0ApsMepIndex | read-write | current | Index of APS MEP for Port 0. Zero if not set. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.9 | Columnme1200ErpsConfigPort1SignalFailMepIndex | read-write | current | Index of SignalFail MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.10 | Columnme1200ErpsConfigPort1ApsMepIndex | read-write | current | Index of APS MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings with virtual channel. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.11 | Columnme1200ErpsConfigHoldOffTime | read-write | current | Hold off time in ms. Value is rounded down to 100ms precision. Valid range is 0-10000 ms |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.12 | Columnme1200ErpsConfigWaitToRestoreTime | read-write | current | Wait-to-Restore time in ms. Valid range is 60000-720000 ms (1-12 minutes). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.13 | Columnme1200ErpsConfigGuardTime | read-write | current | Guard time in ms. Valid range is 10-2000 ms. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.14 | Columnme1200ErpsConfigRplMode | read-write | current | Ring Protection Link mode. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.15 | Columnme1200ErpsConfigRplPort | read-write | current | RPL port. Only valid if the ERPS group is RPL owner or neighbour. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.16 | Columnme1200ErpsConfigRevertive | read-write | current | Revertive (true) or Non-revertive (false) mode. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.17 | Columnme1200ErpsConfigVersion | read-write | current | ERPS protocol version. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.18 | Columnme1200ErpsConfigTopologyChange | read-write | current | Whether to enable Topology Change propagation; only valid for an interconnected node. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.19 | Columnme1200ErpsConfigProtectedVlans0Kto1K | read-write | current | First quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.20 | Columnme1200ErpsConfigProtectedVlans1Kto2K | read-write | current | Second quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.21 | Columnme1200ErpsConfigProtectedVlans2Kto3K | read-write | current | Third quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.22 | Columnme1200ErpsConfigProtectedVlans3Kto4K | read-write | current | Fourth quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.100 | Columnme1200ErpsConfigAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2 | Nodeme1200ErpsConfigRowEditor | |||
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.1 | Scalarme1200ErpsConfigRowEditorGroupIndex | read-write | current | ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.2 | Scalarme1200ErpsConfigRowEditorRingType | read-write | current | Type of ring. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.3 | Scalarme1200ErpsConfigRowEditorPort0 | read-write | current | ifindex of ring protection port 0. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.4 | Scalarme1200ErpsConfigRowEditorPort1 | read-write | current | ifindex of ring protection Port 1. For interconnected sub-rings this value must be zero. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.5 | Scalarme1200ErpsConfigRowEditorInterconnectMajorRingGroupIndex | read-write | current | For sub-ring: zero = not interconnected; > zero = index of major ring group. For major ring: zero = not interconnected; > zero = is interconnected (i.e flag-li… |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.6 | Scalarme1200ErpsConfigRowEditorVirtualChannel | read-write | current | Whether to use a virtual channel. Can only be set once for a ring instance. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.7 | Scalarme1200ErpsConfigRowEditorPort0SignalFailMepIndex | read-write | current | Index of SignalFail MEP for Port 0. Zero if not set. To clear an ERPS group's MEP association, set this to zero; it affects all MEP indices. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.8 | Scalarme1200ErpsConfigRowEditorPort0ApsMepIndex | read-write | current | Index of APS MEP for Port 0. Zero if not set. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.9 | Scalarme1200ErpsConfigRowEditorPort1SignalFailMepIndex | read-write | current | Index of SignalFail MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.10 | Scalarme1200ErpsConfigRowEditorPort1ApsMepIndex | read-write | current | Index of APS MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings with virtual channel. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.11 | Scalarme1200ErpsConfigRowEditorHoldOffTime | read-write | current | Hold off time in ms. Value is rounded down to 100ms precision. Valid range is 0-10000 ms |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.12 | Scalarme1200ErpsConfigRowEditorWaitToRestoreTime | read-write | current | Wait-to-Restore time in ms. Valid range is 60000-720000 ms (1-12 minutes). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.13 | Scalarme1200ErpsConfigRowEditorGuardTime | read-write | current | Guard time in ms. Valid range is 10-2000 ms. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.14 | Scalarme1200ErpsConfigRowEditorRplMode | read-write | current | Ring Protection Link mode. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.15 | Scalarme1200ErpsConfigRowEditorRplPort | read-write | current | RPL port. Only valid if the ERPS group is RPL owner or neighbour. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.16 | Scalarme1200ErpsConfigRowEditorRevertive | read-write | current | Revertive (true) or Non-revertive (false) mode. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.17 | Scalarme1200ErpsConfigRowEditorVersion | read-write | current | ERPS protocol version. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.18 | Scalarme1200ErpsConfigRowEditorTopologyChange | read-write | current | Whether to enable Topology Change propagation; only valid for an interconnected node. |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.19 | Scalarme1200ErpsConfigRowEditorProtectedVlans0Kto1K | read-write | current | First quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.20 | Scalarme1200ErpsConfigRowEditorProtectedVlans1Kto2K | read-write | current | Second quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.21 | Scalarme1200ErpsConfigRowEditorProtectedVlans2Kto3K | read-write | current | Third quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.22 | Scalarme1200ErpsConfigRowEditorProtectedVlans3Kto4K | read-write | current | Fourth quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0'). |
| 1.3.6.1.4.1.9.9.815.1.72.1.2.2.100 | Scalarme1200ErpsConfigRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.72.1.3 | Nodeme1200ErpsStatus | |||
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1 | Tableme1200ErpsStatusTable | not-accessible | current | This table contains status per EPRS group. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1 | Rowme1200ErpsStatusEntry | not-accessible | current | Status. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.1 | Columnme1200ErpsStatusGroupIndex | not-accessible | current | ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.2 | Columnme1200ErpsStatusActive | read-only | current | Specifies whether ERPS group is currently active or not. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.3 | Columnme1200ErpsStatusProtectionState | read-only | current | Specifies current ERPS group protection state. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.4 | Columnme1200ErpsStatusRplBlocked | read-only | current | Specifies whether the RPL is currently blocked or not. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.5 | Columnme1200ErpsStatusWtrRemaining | read-only | current | Specifies the remaining wait-time before restoring ring. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.6 | Columnme1200ErpsStatusAdminCmd | read-only | current | Specifies the currently active administrative command. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.7 | Columnme1200ErpsStatusFopAlarm | read-only | current | Specifies whether the FailureOfProtocol alarm is currently active or not. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.8 | Columnme1200ErpsStatusTxActive | read-only | current | Specifies whether R-APS transmission is currently active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.9 | Columnme1200ErpsStatusTxRequestOrState | read-only | current | Specifies the currently transmitted request/state. Only relevant when Tx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.10 | Columnme1200ErpsStatusTxRplBlocked | read-only | current | Specifies the currently transmitted RPL Blocked flag. Only relevant when Tx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.11 | Columnme1200ErpsStatusTxDoNotFlush | read-only | current | Specifies the currently transmitted Do Not Flush flag. Only relevant when Tx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.12 | Columnme1200ErpsStatusBlockedPortReference | read-only | current | Specifies the currently transmitted Blocked Port Reference. Only relevant when Tx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.13 | Columnme1200ErpsStatusPort0Blocked | read-only | current | Specifies whether ring Port 0 is blocked or not. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.14 | Columnme1200ErpsStatusPort0State | read-only | current | Specifies the state of ring Port 0. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.15 | Columnme1200ErpsStatusPort0RxActive | read-only | current | Specifies if ring Port0 receives R-APS. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.16 | Columnme1200ErpsStatusPort0RxRequestOrState | read-only | current | Specifies the most recently received request/state on ring Port 0. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.17 | Columnme1200ErpsStatusPort0RxRplBlocked | read-only | current | Specifies the most recently received RPL Blocked flag on ring Port 0. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.18 | Columnme1200ErpsStatusPort0RxDoNotFlush | read-only | current | Specifies the most recently received Do Not Flush flag on ring Port 0. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.19 | Columnme1200ErpsStatusPort0RxBlockedPortReference | read-only | current | Specifies the most recently received Blocked Port Reference on ring Port 0. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.20 | Columnme1200ErpsStatusPort0RxNodeId | read-only | current | Specifies the most recently received node ID on ring Port 0. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.21 | Columnme1200ErpsStatusPort1Blocked | read-only | current | Specifies whether ring Port 1 is blocked or not. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.22 | Columnme1200ErpsStatusPort1State | read-only | current | Specifies the state of ring Port 1. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.23 | Columnme1200ErpsStatusPort1RxActive | read-only | current | Specifies if ring Port1 receives R-APS. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.24 | Columnme1200ErpsStatusPort1RxRequestOrState | read-only | current | Specifies the most recently received request/state on ring Port 1. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.25 | Columnme1200ErpsStatusPort1RxRplBlocked | read-only | current | Specifies the most recently received RPL Blocked flag on ring Port 1. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.26 | Columnme1200ErpsStatusPort1RxDoNotFlush | read-only | current | Specifies the most recently received Do Not Flush flag on ring Port 1. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.27 | Columnme1200ErpsStatusPort1RxBlockedPortReference | read-only | current | Specifies the most recently received Blocked Port Reference on ring Port 1. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.28 | Columnme1200ErpsStatusPort1RxNodeId | read-only | current | Specifies the most recently received node ID on ring Port 1. Only relevant when Rx is active. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4 | Nodeme1200ErpsStatistics | |||
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1 | Tableme1200ErpsStatisticsTable | not-accessible | current | This table contains statistics per EPRS group. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1 | Rowme1200ErpsStatisticsEntry | not-accessible | current | Various PDU and event counters. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.1 | Columnme1200ErpsStatisticsGroupIndex | not-accessible | current | ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.2 | Columnme1200ErpsStatisticsRapsTx | read-only | current | Number of transmitted RAPS PDUs. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.3 | Columnme1200ErpsStatisticsRapsRx | read-only | current | Number of received RAPS PDUs. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.4 | Columnme1200ErpsStatisticsRapsRxDrop | read-only | current | Number of received RAPS PDUs that were dropped. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.5 | Columnme1200ErpsStatisticsLocalSF | read-only | current | Number of local SignalFail events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.6 | Columnme1200ErpsStatisticsLocalSFCleared | read-only | current | Number of local SignalFail clear events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.7 | Columnme1200ErpsStatisticsRemoteSF | read-only | current | Number of remote SignalFail events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.8 | Columnme1200ErpsStatisticsNR | read-only | current | Number of NoRequest events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.9 | Columnme1200ErpsStatisticsRemoteMS | read-only | current | Number of remote ManualSwitch events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.10 | Columnme1200ErpsStatisticsLocalMS | read-only | current | Number of local ManualSwitch events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.11 | Columnme1200ErpsStatisticsRemoteFS | read-only | current | Number of remote ForcedSwitch events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.12 | Columnme1200ErpsStatisticsLocalFS | read-only | current | Number of local ForcedSwitch events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.13 | Columnme1200ErpsStatisticsAdminClear | read-only | current | Number of AdminClear events. |
| 1.3.6.1.4.1.9.9.815.1.72.1.5 | Nodeme1200ErpsControl | |||
| 1.3.6.1.4.1.9.9.815.1.72.1.5.1 | Tableme1200ErpsControlTable | not-accessible | current | This is the ERPS group control table. |
| 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1 | Rowme1200ErpsControlEntry | not-accessible | current | Each entry in this table represents dynamic control elements an ERPS group. |
| 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.1 | Columnme1200ErpsControlGroupIndex | not-accessible | current | ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities. |
| 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.2 | Columnme1200ErpsControlCommand | read-write | current | Control command to execute. Always returns none when read. |
| 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.3 | Columnme1200ErpsControlPort | read-write | current | Ring port affected by control command. Only relevant for administrative commands. Always returns port0 when read. |
| 1.3.6.1.4.1.9.9.815.1.72.2 | Nodeme1200ErpsMIBConformance | |||
| 1.3.6.1.4.1.9.9.815.1.72.2.1 | Nodeme1200ErpsMIBCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.72.2.1.1 | Complianceme1200ErpsMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.72.2.2 | Nodeme1200ErpsMIBGroups | |||
| 1.3.6.1.4.1.9.9.815.1.72.2.2.1 | Groupme1200ErpsCapabilitiesInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.72.2.2.2 | Groupme1200ErpsConfigTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.72.2.2.3 | Groupme1200ErpsConfigRowEditorInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.72.2.2.4 | Groupme1200ErpsStatusTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.72.2.2.5 | Groupme1200ErpsStatisticsTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.72.2.2.6 | Groupme1200ErpsControlTableInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200ErpsAdminCmd | INTEGER { manualSwitch(1), forcedSwitch(2), clear(3) } | current | Specifies the Administrative command. |
| ME1200ErpsControlCmd | INTEGER { none(0), admCmdForcedSwitch(1), admCmdManualSwitch(2), admCmdClear(3), statisticsClear(4) } | current | Specifies a control command. |
| ME1200ErpsPort | INTEGER { port0(1), port1(2) } | current | Specifies a particular logical ring port. |
| ME1200ErpsPortState | INTEGER { ok(1), signalFail(2) } | current | Specifies the ring port state. |
| ME1200ErpsProtectionState | INTEGER { none(1), idle(2), protected(3), forcedSwitch(4), manualSwitch(5), pending(6) } | current | Specifies the ring protection state. |
| ME1200ErpsRequestState | INTEGER { none(1), manualSwitch(2), signalFail(3), forcedSwitch(4), event(5) } | current | Specifies a request/state. |
| ME1200ErpsRingType | INTEGER { major(1), sub(2) } | current | Specifies the ERPS ring type. |
| ME1200ErpsRplMode | INTEGER { none(1), owner(2), neighbour(3) } | current | Specifies the Ring Protection Link mode. Use 'none' if port is neither RPL owner nor neighbour. |
| ME1200ErpsVersion | INTEGER { version1(1), version2(2) } | current | Specifies the ERPS protocol version. |