ME1200-IPMC-SNOOPING-MIB
209 objects
This is a private version of the IPMC Snooping MIB
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| ME1200-TC | ME1200DisplayString ME1200InterfaceIndex ME1200PortListStackable ME1200RowEditorState ME1200Unsigned8 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.69 | Identityme1200IpmcSnoopingMib | This is a private version of the IPMC Snooping MIB | ||
| 1.3.6.1.4.1.9.9.815.1.69.1 | Nodeme1200IpmcSnoopingMIBObjects | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.2 | Nodeme1200IpmcSnoopingConfig | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.2.1 | Nodeme1200IpmcSnoopingIgmpGlobals | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.2.1.1 | Scalarme1200IpmcSnoopingIgmpGlobalsAdminState | read-write | current | Enable/Disable the IGMP snooping global functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.1.2 | Scalarme1200IpmcSnoopingIgmpGlobalsUnregisteredFlooding | read-write | current | Enable/Disable the control for flooding unregistered IPv4 multicast traffic. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.1.3 | Scalarme1200IpmcSnoopingIgmpGlobalsSsmRangeAddress | read-write | current | The address prefix value defined for IGMP SSM service model. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.1.4 | Scalarme1200IpmcSnoopingIgmpGlobalsSsmRangeMask | read-write | current | The address prefix length defined for IGMP SSM service model. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.1.5 | Scalarme1200IpmcSnoopingIgmpGlobalsProxy | read-write | current | Enable/Disable the IGMP proxy functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.1.6 | Scalarme1200IpmcSnoopingIgmpGlobalsLeaveProxy | read-write | current | Enable/Disable the IGMP leave-proxy functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.2 | Tableme1200IpmcSnoopingIgmpPortTable | not-accessible | current | This is a table for managing extra IGMP snooping helper features per port basis |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.2.1 | Rowme1200IpmcSnoopingIgmpPortEntry | not-accessible | current | Each port has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.2.1.1 | Columnme1200IpmcSnoopingIgmpPortPortIndex | not-accessible | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.2.1.2 | Columnme1200IpmcSnoopingIgmpPortAsRouterPort | read-write | current | Enable/Disable the IGMP static router port functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.2.1.3 | Columnme1200IpmcSnoopingIgmpPortDoFastLeave | read-write | current | Enable/Disable the IGMP fast leave functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.2.1.4 | Columnme1200IpmcSnoopingIgmpPortThrottlingNumber | read-write | current | The maximum number of groups to be registered on the specific port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.2.1.5 | Columnme1200IpmcSnoopingIgmpPortFilteringProfile | read-write | current | The profile used for IGMP filtering per-port basis. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3 | Tableme1200IpmcSnoopingIgmpInterfaceTable | not-accessible | current | This is a table for managing IGMP Snooping VLAN interface entries. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1 | Rowme1200IpmcSnoopingIgmpInterfaceEntry | not-accessible | current | Each entry has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.1 | Columnme1200IpmcSnoopingIgmpInterfaceIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.2 | Columnme1200IpmcSnoopingIgmpInterfaceAdminState | read-write | current | Enable/Disable the IGMP snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.3 | Columnme1200IpmcSnoopingIgmpInterfaceQuerierElection | read-write | current | Enable/Disable the capability to run IGMP Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.4 | Columnme1200IpmcSnoopingIgmpInterfaceQuerierAddress | read-write | current | The static IPv4 source address of the specific IGMP interface for seding IGMP Query message with respect to IGMP Querier election. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.5 | Columnme1200IpmcSnoopingIgmpInterfaceCompatibility | read-write | current | The compatibility control for IGMP snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.6 | Columnme1200IpmcSnoopingIgmpInterfacePriority | read-write | current | This setting is used for prioritizing the IGMP control frames to be sent for IGMP snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.7 | Columnme1200IpmcSnoopingIgmpInterfaceRv | read-write | current | This setting Robustness Variable is used to control IGMP protocol stack as stated in RFC-3376 8.1. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.8 | Columnme1200IpmcSnoopingIgmpInterfaceQi | read-write | current | This setting Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.2. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.9 | Columnme1200IpmcSnoopingIgmpInterfaceQri | read-write | current | This setting Query Response Intervalis used to control IGMP protocol stack as stated in RFC-3376 8.3. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.10 | Columnme1200IpmcSnoopingIgmpInterfaceLmqi | read-write | current | This setting Last Member Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.8. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.11 | Columnme1200IpmcSnoopingIgmpInterfaceUri | read-write | current | This setting Unsolicited Report Interval is used to control IGMP protocol stack as stated in RFC-3376 8.11. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.3.1.100 | Columnme1200IpmcSnoopingIgmpInterfaceAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4 | Nodeme1200IpmcSnoopingIgmpInterfaceTableRowEditor | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.1 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.2 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorAdminState | read-write | current | Enable/Disable the IGMP snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.3 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorQuerierElection | read-write | current | Enable/Disable the capability to run IGMP Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.4 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorQuerierAddress | read-write | current | The static IPv4 source address of the specific IGMP interface for seding IGMP Query message with respect to IGMP Querier election. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.5 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorCompatibility | read-write | current | The compatibility control for IGMP snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.6 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorPriority | read-write | current | This setting is used for prioritizing the IGMP control frames to be sent for IGMP snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.7 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorRv | read-write | current | This setting Robustness Variable is used to control IGMP protocol stack as stated in RFC-3376 8.1. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.8 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorQi | read-write | current | This setting Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.2. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.9 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorQri | read-write | current | This setting Query Response Intervalis used to control IGMP protocol stack as stated in RFC-3376 8.3. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.10 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorLmqi | read-write | current | This setting Last Member Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.8. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.11 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorUri | read-write | current | This setting Unsolicited Report Interval is used to control IGMP protocol stack as stated in RFC-3376 8.11. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.4.100 | Scalarme1200IpmcSnoopingIgmpInterfaceTableRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.5 | Nodeme1200IpmcSnoopingMldGlobals | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.2.5.1 | Scalarme1200IpmcSnoopingMldGlobalsAdminState | read-write | current | Enable/Disable the MLD snooping global functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.5.2 | Scalarme1200IpmcSnoopingMldGlobalsUnregisteredFlooding | read-write | current | Enable/Disable the control for flooding unregistered IPv6 multicast traffic. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.5.3 | Scalarme1200IpmcSnoopingMldGlobalsSsmRangeAddress | read-write | current | The address prefix value defined for MLD SSM service model. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.5.4 | Scalarme1200IpmcSnoopingMldGlobalsSsmRangeMask | read-write | current | The address prefix length defined for MLD SSM service model. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.5.5 | Scalarme1200IpmcSnoopingMldGlobalsProxy | read-write | current | Enable/Disable the MLD proxy functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.5.6 | Scalarme1200IpmcSnoopingMldGlobalsLeaveProxy | read-write | current | Enable/Disable the MLD leave-proxy functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.6 | Tableme1200IpmcSnoopingMldPortTable | not-accessible | current | This is a table for managing extra MLD snooping helper features per port basis |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.6.1 | Rowme1200IpmcSnoopingMldPortEntry | not-accessible | current | Each port has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.6.1.1 | Columnme1200IpmcSnoopingMldPortPortIndex | not-accessible | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.6.1.2 | Columnme1200IpmcSnoopingMldPortAsRouterPort | read-write | current | Enable/Disable the MLD static router port functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.6.1.3 | Columnme1200IpmcSnoopingMldPortDoFastLeave | read-write | current | Enable/Disable the MLD fast leave functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.6.1.4 | Columnme1200IpmcSnoopingMldPortThrottlingNumber | read-write | current | The maximum number of groups to be registered on the specific port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.6.1.5 | Columnme1200IpmcSnoopingMldPortFilteringProfile | read-write | current | The profile used for MLD filtering per-port basis. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7 | Tableme1200IpmcSnoopingMldInterfaceTable | not-accessible | current | This is a table for managing MLD Snooping VLAN interface entries. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1 | Rowme1200IpmcSnoopingMldInterfaceEntry | not-accessible | current | Each entry has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.1 | Columnme1200IpmcSnoopingMldInterfaceIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.2 | Columnme1200IpmcSnoopingMldInterfaceAdminState | read-write | current | Enable/Disable the MLD snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.3 | Columnme1200IpmcSnoopingMldInterfaceQuerierElection | read-write | current | Enable/Disable the capability to run MLD Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.4 | Columnme1200IpmcSnoopingMldInterfaceCompatibility | read-write | current | The compatibility control for MLD snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.5 | Columnme1200IpmcSnoopingMldInterfacePriority | read-write | current | This setting is used for prioritizing the MLD control frames to be sent for MLD snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.6 | Columnme1200IpmcSnoopingMldInterfaceRv | read-write | current | This setting Robustness Variableis used to control MLD protocol stack as stated in RFC-3810 9.1. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.7 | Columnme1200IpmcSnoopingMldInterfaceQi | read-write | current | This setting Query Intervalis used to control MLD protocol stack as stated in RFC-3810 9.2. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.8 | Columnme1200IpmcSnoopingMldInterfaceQri | read-write | current | This setting Query Response Intervalis used to control MLD protocol stack as stated in RFC-3810 9.3. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.9 | Columnme1200IpmcSnoopingMldInterfaceLlqi | read-write | current | This setting Last Listener Query Interval is used to control MLD protocol stack as stated in RFC-3810 9.8. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.10 | Columnme1200IpmcSnoopingMldInterfaceUri | read-write | current | This setting Unsolicited Report Intervalis used to control MLD protocol stack as stated in RFC-3810 9.11. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.7.1.100 | Columnme1200IpmcSnoopingMldInterfaceAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8 | Nodeme1200IpmcSnoopingMldInterfaceTableRowEditor | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.1 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.2 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorAdminState | read-write | current | Enable/Disable the MLD snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.3 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorQuerierElection | read-write | current | Enable/Disable the capability to run MLD Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.4 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorCompatibility | read-write | current | The compatibility control for MLD snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.5 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorPriority | read-write | current | This setting is used for prioritizing the MLD control frames to be sent for MLD snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.6 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorRv | read-write | current | This setting Robustness Variableis used to control MLD protocol stack as stated in RFC-3810 9.1. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.7 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorQi | read-write | current | This setting Query Intervalis used to control MLD protocol stack as stated in RFC-3810 9.2. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.8 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorQri | read-write | current | This setting Query Response Intervalis used to control MLD protocol stack as stated in RFC-3810 9.3. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.9 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorLlqi | read-write | current | This setting Last Listener Query Interval is used to control MLD protocol stack as stated in RFC-3810 9.8. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.10 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorUri | read-write | current | This setting Unsolicited Report Intervalis used to control MLD protocol stack as stated in RFC-3810 9.11. |
| 1.3.6.1.4.1.9.9.815.1.69.1.2.8.100 | Scalarme1200IpmcSnoopingMldInterfaceTableRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.69.1.3 | Nodeme1200IpmcSnoopingStatus | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.3.1 | Nodeme1200IpmcSnoopingGroupAddressCount | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.3.1.1 | Scalarme1200IpmcSnoopingGroupAddressCountFromIgmp | read-only | current | It is used to denote the total number of registered multicast group address from IGMP snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.1.2 | Scalarme1200IpmcSnoopingGroupAddressCountFromMld | read-only | current | It is used to denote the total number of registered multicast group address from MLD snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.2 | Tableme1200IpmcSnoopingIgmpRouterPortTable | not-accessible | current | This is a table for displaying the router port status from IGMP snooping configuration. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.2.1 | Rowme1200IpmcSnoopingIgmpRouterPortEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.2.1.1 | Columnme1200IpmcSnoopingIgmpRouterPortPortIndex | not-accessible | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.2.1.2 | Columnme1200IpmcSnoopingIgmpRouterPortStatus | read-only | current | The IGMP snooping router port status. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3 | Tableme1200IpmcSnoopingIgmpVlanStatusTable | not-accessible | current | This is a table for displaying the per VLAN interface status in IGMP snooping configuration. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1 | Rowme1200IpmcSnoopingIgmpVlanStatusEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.1 | Columnme1200IpmcSnoopingIgmpVlanStatusIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.2 | Columnme1200IpmcSnoopingIgmpVlanStatusQuerierStatus | read-only | current | The IGMP Querier status of the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.3 | Columnme1200IpmcSnoopingIgmpVlanStatusActiveQuerierAddress | read-only | current | The active IGMP Querier address on the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.4 | Columnme1200IpmcSnoopingIgmpVlanStatusQuerierUptime | read-only | current | It presents the in operation timer for the specific interface act as a IGMP Querier. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.5 | Columnme1200IpmcSnoopingIgmpVlanStatusQueryInterval | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.2. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.6 | Columnme1200IpmcSnoopingIgmpVlanStatusStartupQueryCount | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.7. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.7 | Columnme1200IpmcSnoopingIgmpVlanStatusQuerierExpiryTime | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.5. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.8 | Columnme1200IpmcSnoopingIgmpVlanStatusQuerierVersion | read-only | current | It presents the current IGMP version that the IGMP interface should behave in running IGMP protocol as a router. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.9 | Columnme1200IpmcSnoopingIgmpVlanStatusQuerierPresentTimeout | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.12. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.10 | Columnme1200IpmcSnoopingIgmpVlanStatusHostVersion | read-only | current | It presents the current IGMP version that the IGMP interface should behave in running IGMP protocol as a host. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.11 | Columnme1200IpmcSnoopingIgmpVlanStatusHostPresentTimeout | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.13. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.12 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterTxQuery | read-only | current | It presents the current packet count on the specific IGMP interface for transmitting IGMP Query control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.13 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterTxSpecificQuery | read-only | current | It presents the current packet count on the specific IGMP interface for transmitting IGMP Specific Query control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.14 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterRxQuery | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMP Query control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.15 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterRxV1Join | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv1 Join control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.16 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterRxV2Join | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv2 Join control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.17 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterRxV2Leave | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv2 Leave control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.18 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterRxV3Join | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv3 Join control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.3.1.19 | Columnme1200IpmcSnoopingIgmpVlanStatusCounterRxErrors | read-only | current | It presents the current packet count on the specific IGMP interface for receiving invalid IGMP control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.4 | Tableme1200IpmcSnoopingIgmpGroupAddressTable | not-accessible | current | This is a table for displaying the registered IPv4 multicast group address status from IGMP snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.4.1 | Rowme1200IpmcSnoopingIgmpGroupAddressEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.4.1.1 | Columnme1200IpmcSnoopingIgmpGroupAddressIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.4.1.2 | Columnme1200IpmcSnoopingIgmpGroupAddressGroupAddress | not-accessible | current | Assigned IPv4 multicast address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.4.1.3 | Columnme1200IpmcSnoopingIgmpGroupAddressMemberPorts | read-only | current | It is used to denote the memberships of the registered multicast group address from IGMP snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.4.1.4 | Columnme1200IpmcSnoopingIgmpGroupAddressHardwareSwitch | read-only | current | It is used to denote whether the multicast traffic destined to the registered group address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5 | Tableme1200IpmcSnoopingIgmpGroupSrcListTable | not-accessible | current | This is a table for displaying the address SFM (a.k.a Source List Multicast) status in source list of the registered IPv4 multicast group from IGMP snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1 | Rowme1200IpmcSnoopingIgmpGroupSrcListEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.1 | Columnme1200IpmcSnoopingIgmpGroupSrcListIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.2 | Columnme1200IpmcSnoopingIgmpGroupSrcListGroupAddress | not-accessible | current | Assigned IPv4 multicast address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.3 | Columnme1200IpmcSnoopingIgmpGroupSrcListPortIndex | not-accessible | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.4 | Columnme1200IpmcSnoopingIgmpGroupSrcListHostAddress | not-accessible | current | Assigned IPv4 source address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.5 | Columnme1200IpmcSnoopingIgmpGroupSrcListGroupFilterMode | read-only | current | It is used to denote the source filtering mode of the specific registered multicast group address from IGMP snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.6 | Columnme1200IpmcSnoopingIgmpGroupSrcListFilterTimer | read-only | current | It is used to count down the timer for the specific multicast group's filtering mode transition. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.7 | Columnme1200IpmcSnoopingIgmpGroupSrcListSourceType | read-only | current | It is used to denote the filtering type of the specific source address in multicasting to the registered group address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.8 | Columnme1200IpmcSnoopingIgmpGroupSrcListSourceTimer | read-only | current | It is used to count down the timer for purging the specific source address from the registered multicast group's source list. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.5.1.9 | Columnme1200IpmcSnoopingIgmpGroupSrcListHardwareFilter | read-only | current | It is used to denote whether the traffic destined to the multicast group address from the specific source address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.6 | Tableme1200IpmcSnoopingMldRouterPortTable | not-accessible | current | This is a table for displaying the router port status from MLD snooping configuration. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.6.1 | Rowme1200IpmcSnoopingMldRouterPortEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.6.1.1 | Columnme1200IpmcSnoopingMldRouterPortPortIndex | not-accessible | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.6.1.2 | Columnme1200IpmcSnoopingMldRouterPortStatus | read-only | current | The MLD snooping router port status. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7 | Tableme1200IpmcSnoopingMldVlanStatusTable | not-accessible | current | This is a table for displaying the per VLAN interface status in MLD snooping configuration. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1 | Rowme1200IpmcSnoopingMldVlanStatusEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.1 | Columnme1200IpmcSnoopingMldVlanStatusIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.2 | Columnme1200IpmcSnoopingMldVlanStatusQuerierStatus | read-only | current | The MLD Querier status of the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.3 | Columnme1200IpmcSnoopingMldVlanStatusActiveQuerierAddress | read-only | current | The active MLD Querier address on the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.4 | Columnme1200IpmcSnoopingMldVlanStatusQuerierUptime | read-only | current | It presents the in operation timer for the specific interface act as a MLD Querier. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.5 | Columnme1200IpmcSnoopingMldVlanStatusQueryInterval | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.2. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.6 | Columnme1200IpmcSnoopingMldVlanStatusStartupQueryCount | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.7. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.7 | Columnme1200IpmcSnoopingMldVlanStatusQuerierExpiryTime | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.5. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.8 | Columnme1200IpmcSnoopingMldVlanStatusQuerierVersion | read-only | current | It presents the current MLD version that the MLD interface should behave in running MLD protocol as a router. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.9 | Columnme1200IpmcSnoopingMldVlanStatusQuerierPresentTimeout | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.12. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.10 | Columnme1200IpmcSnoopingMldVlanStatusHostVersion | read-only | current | It presents the current MLD version that the MLD interface should behave in running MLD protocol as a host. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.11 | Columnme1200IpmcSnoopingMldVlanStatusHostPresentTimeout | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.13. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.12 | Columnme1200IpmcSnoopingMldVlanStatusCounterTxQuery | read-only | current | It presents the current packet count on the specific MLD interface for transmitting MLD Query control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.13 | Columnme1200IpmcSnoopingMldVlanStatusCounterTxSpecificQuery | read-only | current | It presents the current packet count on the specific MLD interface for transmitting MLD Specific Query control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.14 | Columnme1200IpmcSnoopingMldVlanStatusCounterRxQuery | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLD Query control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.15 | Columnme1200IpmcSnoopingMldVlanStatusCounterRxV1Report | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLDv1 Report control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.16 | Columnme1200IpmcSnoopingMldVlanStatusCounterRxV1Done | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLDv1 Done control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.17 | Columnme1200IpmcSnoopingMldVlanStatusCounterRxV2Report | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLDv2 Report control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.7.1.18 | Columnme1200IpmcSnoopingMldVlanStatusCounterRxErrors | read-only | current | It presents the current packet count on the specific MLD interface for receiving invalid MLD control frames. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.8 | Tableme1200IpmcSnoopingMldGroupAddressTable | not-accessible | current | This is a table for displaying the registered IPv6 multicast group address status from MLD snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.8.1 | Rowme1200IpmcSnoopingMldGroupAddressEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.8.1.1 | Columnme1200IpmcSnoopingMldGroupAddressIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.8.1.2 | Columnme1200IpmcSnoopingMldGroupAddressGroupAddress | not-accessible | current | Assigned IPv6 multicast address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.8.1.3 | Columnme1200IpmcSnoopingMldGroupAddressMemberPorts | read-only | current | It is used to denote the memberships of the registered multicast group address from MLD snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.8.1.4 | Columnme1200IpmcSnoopingMldGroupAddressHardwareSwitch | read-only | current | It is used to denote whether the multicast traffic destined to the registered group address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9 | Tableme1200IpmcSnoopingMldGroupSrcListTable | not-accessible | current | This is a table for displaying the address SFM (a.k.a Source List Multicast) status in source list of the registered IPv6 multicast group from MLD snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1 | Rowme1200IpmcSnoopingMldGroupSrcListEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.1 | Columnme1200IpmcSnoopingMldGroupSrcListIfIndex | not-accessible | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.2 | Columnme1200IpmcSnoopingMldGroupSrcListGroupAddress | not-accessible | current | Assigned IPv6 multicast address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.3 | Columnme1200IpmcSnoopingMldGroupSrcListPortIndex | not-accessible | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.4 | Columnme1200IpmcSnoopingMldGroupSrcListHostAddress | not-accessible | current | Assigned IPv6 source address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.5 | Columnme1200IpmcSnoopingMldGroupSrcListGroupFilterMode | read-only | current | It is used to denote the source filtering mode of the specific registered multicast group address from MLD snooping. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.6 | Columnme1200IpmcSnoopingMldGroupSrcListFilterTimer | read-only | current | It is used to count down the timer for the specific multicast group's filtering mode transition. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.7 | Columnme1200IpmcSnoopingMldGroupSrcListSourceType | read-only | current | It is used to denote the filtering type of the specific source address in multicasting to the registered group address. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.8 | Columnme1200IpmcSnoopingMldGroupSrcListSourceTimer | read-only | current | It is used to count down the timer for purging the specific source address from the registered multicast group's source list. |
| 1.3.6.1.4.1.9.9.815.1.69.1.3.9.1.9 | Columnme1200IpmcSnoopingMldGroupSrcListHardwareFilter | read-only | current | It is used to denote whether the traffic destined to the multicast group address from the specific source address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.815.1.69.1.4 | Nodeme1200IpmcSnoopingControl | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.4.1 | Nodeme1200IpmcSnoopingControlStatistics | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.4.1.1 | Nodeme1200IpmcSnoopingControlStatisticsIgmpClearByIfIndex | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.4.1.1.1 | Scalarme1200IpmcSnoopingControlStatisticsIgmpClearByIfIndexIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.1.4.1.2 | Nodeme1200IpmcSnoopingControlStatisticsMldClearByIfIndex | |||
| 1.3.6.1.4.1.9.9.815.1.69.1.4.1.2.1 | Scalarme1200IpmcSnoopingControlStatisticsMldClearByIfIndexIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.815.1.69.2 | Nodeme1200IpmcSnoopingMIBConformance | |||
| 1.3.6.1.4.1.9.9.815.1.69.2.1 | Nodeme1200IpmcSnoopingMIBCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.69.2.1.1 | Complianceme1200IpmcSnoopingMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2 | Nodeme1200IpmcSnoopingMIBGroups | |||
| 1.3.6.1.4.1.9.9.815.1.69.2.2.1 | Groupme1200IpmcSnoopingIgmpGlobalsInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.2 | Groupme1200IpmcSnoopingIgmpPortTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.3 | Groupme1200IpmcSnoopingIgmpInterfaceTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.4 | Groupme1200IpmcSnoopingIgmpInterfaceTableRowEditorInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.5 | Groupme1200IpmcSnoopingMldGlobalsInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.6 | Groupme1200IpmcSnoopingMldPortTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.7 | Groupme1200IpmcSnoopingMldInterfaceTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.8 | Groupme1200IpmcSnoopingMldInterfaceTableRowEditorInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.9 | Groupme1200IpmcSnoopingGroupAddressCountInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.10 | Groupme1200IpmcSnoopingIgmpRouterPortTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.11 | Groupme1200IpmcSnoopingIgmpVlanStatusTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.12 | Groupme1200IpmcSnoopingIgmpGroupAddressTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.13 | Groupme1200IpmcSnoopingIgmpGroupSrcListTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.14 | Groupme1200IpmcSnoopingMldRouterPortTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.15 | Groupme1200IpmcSnoopingMldVlanStatusTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.16 | Groupme1200IpmcSnoopingMldGroupAddressTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.17 | Groupme1200IpmcSnoopingMldGroupSrcListTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.18 | Groupme1200IpmcSnoopingControlStatisticsIgmpClearByIfIndexInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.69.2.2.19 | Groupme1200IpmcSnoopingControlStatisticsMldClearByIfIndexInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200IpmcSnpIgmpGroupSrcListGroupFilterMode | INTEGER { exclude(0), include(1), none(2) } | current | This enumeration indicates the group filter mode for a IGMP group address. |
| ME1200IpmcSnpIgmpGroupSrcListSourceType | INTEGER { deny(0), permit(1) } | current | This enumeration indicates the source filtering type from IGMP snooping. |
| ME1200IpmcSnpIgmpInterfaceCompatibility | INTEGER { auto(0), igmpv1(1), igmpv2(2), igmpv3(3) } | current | This enumeration indicates the version compatibility for IGMP snooping VLAN interface. |
| ME1200IpmcSnpIgmpRouterPortStatus | INTEGER { none(0), static(1), dynamic(2), both(3) } | current | This enumeration indicates the router port status from IGMP snooping. |
| ME1200IpmcSnpIgmpVlanStatusQuerierStatus | INTEGER { disabled(0), initial(1), idle(2), active(3) } | current | This enumeration indicates the querier status for IGMP snooping VLAN interface. |
| ME1200IpmcSnpMldGroupSrcListGroupFilterMode | INTEGER { exclude(0), include(1), none(2) } | current | This enumeration indicates the group filter mode for a MLD group address. |
| ME1200IpmcSnpMldGroupSrcListSourceType | INTEGER { deny(0), permit(1) } | current | This enumeration indicates the source filtering type from MLD snooping. |
| ME1200IpmcSnpMldInterfaceCompatibility | INTEGER { auto(0), mldv1(1), mldv2(2) } | current | This enumeration indicates the version compatibility for MLD snooping VLAN interface. |
| ME1200IpmcSnpMldRouterPortStatus | INTEGER { none(0), static(1), dynamic(2), both(3) } | current | This enumeration indicates the router port status from MLD snooping. |
| ME1200IpmcSnpMldVlanStatusQuerierStatus | INTEGER { disabled(0), initial(1), idle(2), active(3) } | current | This enumeration indicates the querier status for MLD snooping VLAN interface. |