ME1200-LLDPMED-MIB
147 objects
This is a private version of the LLDPMED MIB
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| ME1200-TC | ME1200DisplayString ME1200Integer64 ME1200InterfaceIndex ME1200RowEditorState ME1200Unsigned16 ME1200Unsigned8 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.71 | Identityme1200LldpmedMib | This is a private version of the LLDPMED MIB | ||
| 1.3.6.1.4.1.9.9.815.1.71.1 | Nodeme1200LldpmedMibObjects | |||
| 1.3.6.1.4.1.9.9.815.1.71.1.2 | Nodeme1200LldpmedConfig | |||
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1 | Nodeme1200LldpmedConfigGlobal | |||
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.1 | Scalarme1200LldpmedConfigGlobalFastRepeatCount | read-write | current | Number of times to repeat LLDP frame transmission at fast start Rapid startup and Emergency Call Service Location Identification Discovery of endpoints is a cr… |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.2 | Scalarme1200LldpmedConfigGlobalLatitude | read-write | current | Latitude degrees in 2s-complement as specified in RFC 3825. Positive numbers are north of the equator and negative numbers are south of the equator. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.3 | Scalarme1200LldpmedConfigGlobalLongitude | read-write | current | Longitude degrees in 2s-complement as specified in RFC 3825. Positive values are East of the prime meridian and negative numbers are West of the prime meridian. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.4 | Scalarme1200LldpmedConfigGlobalAltitudeType | read-write | current | Setting altitude type Possible to select between two altitude types (floors or meters). Meters are representing meters of altitude defined by the vertical datu… |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.5 | Scalarme1200LldpmedConfigGlobalAltitude | read-write | current | Altitude value in 2s-complement as specified in RFC 3825 |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.6 | Scalarme1200LldpmedConfigGlobalElinAddr | read-write | current | Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used during emergency call setup to a traditional CAMA or ISDN tr… |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.1.7 | Scalarme1200LldpmedConfigGlobalDatum | read-write | current | Setting datum to configure the datum (geodetic system) to use. The Map Datum is used for the coordinates given in these options: WGS84: (Geographical 3D) - Wor… |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2 | Nodeme1200LldpmedConfigLocationInformation | |||
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.1 | Scalarme1200LldpmedConfigLocationInformationState | read-write | current | National subdivision |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.2 | Scalarme1200LldpmedConfigLocationInformationCounty | read-write | current | County |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.3 | Scalarme1200LldpmedConfigLocationInformationCity | read-write | current | City |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.4 | Scalarme1200LldpmedConfigLocationInformationCityDistrict | read-write | current | City district |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.5 | Scalarme1200LldpmedConfigLocationInformationBlock | read-write | current | Block (Neighborhood) |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.6 | Scalarme1200LldpmedConfigLocationInformationStreet | read-write | current | Street |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.7 | Scalarme1200LldpmedConfigLocationInformationLeadingStreetDirection | read-write | current | Street Direction |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.8 | Scalarme1200LldpmedConfigLocationInformationTrailingStreetSuffix | read-write | current | Trailling Street |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.9 | Scalarme1200LldpmedConfigLocationInformationStreetSuffix | read-write | current | Street Suffix |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.10 | Scalarme1200LldpmedConfigLocationInformationHouseNo | read-write | current | House No. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.11 | Scalarme1200LldpmedConfigLocationInformationHouseNoSuffix | read-write | current | House No. Suffix |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.12 | Scalarme1200LldpmedConfigLocationInformationLandmark | read-write | current | Landmark |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.13 | Scalarme1200LldpmedConfigLocationInformationAdditionalInfo | read-write | current | Additional Location Info |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.14 | Scalarme1200LldpmedConfigLocationInformationName | read-write | current | Name |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.15 | Scalarme1200LldpmedConfigLocationInformationZipCode | read-write | current | Zip Code |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.16 | Scalarme1200LldpmedConfigLocationInformationBuilding | read-write | current | Building |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.17 | Scalarme1200LldpmedConfigLocationInformationApartment | read-write | current | Unit |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.18 | Scalarme1200LldpmedConfigLocationInformationFloor | read-write | current | Floor |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.19 | Scalarme1200LldpmedConfigLocationInformationRoomNumber | read-write | current | Room No. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.20 | Scalarme1200LldpmedConfigLocationInformationPlaceType | read-write | current | Placetype |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.21 | Scalarme1200LldpmedConfigLocationInformationPostalCommunityName | read-write | current | Postal Community Name |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.22 | Scalarme1200LldpmedConfigLocationInformationPoBox | read-write | current | P.O. Box |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.23 | Scalarme1200LldpmedConfigLocationInformationAdditionalCode | read-write | current | Addination Code |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.2.24 | Scalarme1200LldpmedConfigLocationInformationCountryCode | read-write | current | The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.3 | Tableme1200LldpmedConfigTable | not-accessible | current | This is a table to configure LLDP MEDIA configurations for a specific interface. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1 | Rowme1200LldpmedConfigEntry | not-accessible | current | Each port has a set of control parameters |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.1 | Columnme1200LldpmedConfigIfIndex | not-accessible | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.3 | Columnme1200LldpmedConfigOptionalTlvs | read-write | current | Enables/Disables the LLDP optional TLVs. Bit mask, where setting the bit(1) to 1 means enable the optional TLV. Bit 0 represents the capabilities TLV. Bit 1 re… |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.4 | Columnme1200LldpmedConfigDeviceType | read-write | current | Setting device type to configure the mode the device shall operate as. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4 | Tableme1200LldpmedConfigPolicyTable | not-accessible | current | This is a table to configure LLDP MED Policies for the device. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1 | Rowme1200LldpmedConfigPolicyEntry | not-accessible | current | Network Policy Discovery enables the efficient discovery and diagnosis of mismatch issues with the VLAN configuration, along with the associated Layer 2 and La… |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.1 | Columnme1200LldpmedConfigPolicyLldpmedPolicy | not-accessible | current | Policy index. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.2 | Columnme1200LldpmedConfigPolicyApplicationType | read-write | current | The LLDP policy application type. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.3 | Columnme1200LldpmedConfigPolicyTagged | read-write | current | Defines if LLDP policy uses tagged VLAN. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.4 | Columnme1200LldpmedConfigPolicyVlanId | read-write | current | The policy VLAN ID. Only valid when policy 'Tagged' is TRUE. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.5 | Columnme1200LldpmedConfigPolicyL2Priority | read-write | current | Shows the LLDP neighbor's policy L2 priority. Only valid when policy 'Tagged' is TRUE. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.6 | Columnme1200LldpmedConfigPolicyDscp | read-write | current | LLDP policy DSCP. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.100 | Columnme1200LldpmedConfigPolicyAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.5 | Tableme1200LldpmedConfigPolicyListTable | not-accessible | current | Each interface can be mapped to multiple policies. Set to TRUE in order to enable the corresponding policy to be transmitted at the interface. It is a requirem… |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1 | Rowme1200LldpmedConfigPolicyListEntry | not-accessible | current | Each location information has a control parameter |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.1 | Columnme1200LldpmedConfigPolicyListIfIndex | not-accessible | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.2 | Columnme1200LldpmedConfigPolicyListPolicyIndex | not-accessible | current | Logical Policy index. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.3 | Columnme1200LldpmedConfigPolicyListLldpmedPoliciesList | read-write | current | Set to TRUE assign the corresponding policy index to the interface. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6 | Nodeme1200LldpmedConfigPolicyRowEditor | |||
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6.1 | Scalarme1200LldpmedConfigPolicyRowEditorLldpmedPolicy | read-write | current | Policy index. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6.2 | Scalarme1200LldpmedConfigPolicyRowEditorApplicationType | read-write | current | The LLDP policy application type. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6.3 | Scalarme1200LldpmedConfigPolicyRowEditorTagged | read-write | current | Defines if LLDP policy uses tagged VLAN. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6.4 | Scalarme1200LldpmedConfigPolicyRowEditorVlanId | read-write | current | The policy VLAN ID. Only valid when policy 'Tagged' is TRUE. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6.5 | Scalarme1200LldpmedConfigPolicyRowEditorL2Priority | read-write | current | Shows the LLDP neighbor's policy L2 priority. Only valid when policy 'Tagged' is TRUE. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6.6 | Scalarme1200LldpmedConfigPolicyRowEditorDscp | read-write | current | LLDP policy DSCP. |
| 1.3.6.1.4.1.9.9.815.1.71.1.2.6.100 | Scalarme1200LldpmedConfigPolicyRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.71.1.3 | Nodeme1200LldpmedStatus | |||
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3 | Tableme1200LldpmedStatusRemoteDeviceInfoTable | not-accessible | current | This is a table to show the LLDP-MED remote device (neighbor) information for a specific interface. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1 | Rowme1200LldpmedStatusRemoteDeviceInfoEntry | not-accessible | current | Each port has a set of neighbor's information |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.1 | Columnme1200LldpmedStatusRemoteDeviceInfoIfIndex | not-accessible | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.2 | Columnme1200LldpmedStatusRemoteDeviceInfoLldpmedIndex | not-accessible | current | Neighbor information table entry index. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.4 | Columnme1200LldpmedStatusRemoteDeviceInfoCapabilities | read-only | current | LLDP neighbor's capabilities bit mask. Bit 0 represents LLDP-MED capabilities. Bit 1 represents Network Policy. Bit 2 represents Location Identification. Bit 3… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.5 | Columnme1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled | read-only | current | LLDP neighbor's capabilities bit mask for the capabilities which are currently enabled. Bit 0 represents LLDP-MED capabilities. Bit 1 represents Network Policy… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.6 | Columnme1200LldpmedStatusRemoteDeviceInfoLatitude | read-only | current | Latitude degrees in 2s-complement as specified in RFC 3825. Positive numbers are north of the equator and negative numbers are south of the equator. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.7 | Columnme1200LldpmedStatusRemoteDeviceInfoLongitude | read-only | current | Longitude degrees in 2s-complement as specified in RFC 3825. Positive values are East of the prime meridian and negative numbers are West of the prime meridian. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.8 | Columnme1200LldpmedStatusRemoteDeviceInfoAltitudeType | read-only | current | Altitude type as either floors or meters. Meters are representing meters of altitude defined by the vertical datum specified. Floors are representing altitude … |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.9 | Columnme1200LldpmedStatusRemoteDeviceInfoAltitude | read-only | current | Altitude value in 2s-complement as specified in RFC 3825 |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.10 | Columnme1200LldpmedStatusRemoteDeviceInfoDatum | read-only | current | Datum (geodetic system) . The Map Datum is used for the coordinates given in these options: WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 432… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12 | Columnme1200LldpmedStatusRemoteDeviceInfoElinAddr | read-only | current | Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used during emergency call setup to a traditional CAMA or ISDN tr… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.13 | Columnme1200LldpmedStatusRemoteDeviceInfoDeviceType | read-only | current | Shows the LLDP neighbor's device type. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.14 | Columnme1200LldpmedStatusRemoteDeviceInfoHwRev | read-only | current | Shows the LLDP neighbor's hardware revision. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.15 | Columnme1200LldpmedStatusRemoteDeviceInfoFwRev | read-only | current | Shows the LLDP neighbor's firmware revision. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.16 | Columnme1200LldpmedStatusRemoteDeviceInfoSwRev | read-only | current | Shows the LLDP neighbor's software revision. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.17 | Columnme1200LldpmedStatusRemoteDeviceInfoSerialNo | read-only | current | Shows the LLDP neighbor's serial number. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.18 | Columnme1200LldpmedStatusRemoteDeviceInfoManufacturerName | read-only | current | Shows the LLDP neighbor's manufacturer name. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.19 | Columnme1200LldpmedStatusRemoteDeviceInfoModelName | read-only | current | Shows the LLDP neighbor's model name. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.20 | Columnme1200LldpmedStatusRemoteDeviceInfoAssetId | read-only | current | Shows the LLDP neighbor's asset id. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.21 | Columnme1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys | read-only | current | Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as the time (expressed in microseconds) that the transmitting link partner will wait before … |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.22 | Columnme1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys | read-only | current | Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as the time (expressed in microseconds) that the receiving link partner is requesting the t… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.23 | Columnme1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys | read-only | current | Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner may inform the transmitter of an alternate desired Tw_sys_tx. Since a receiving link par… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.24 | Columnme1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho | read-only | current | Shows the LLDP neighbor's echo transmit Tw. The respective echo values shall be defined as the local link partners reflection (echo) of the remote link partner… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.25 | Columnme1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho | read-only | current | Shows the LLDP neighbor's echo receive Tw. The respective echo values shall be defined as the local link partners reflection (echo) of the remote link partners… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4 | Tableme1200LldpmedStatusRemoteDeviceLocInfoTable | not-accessible | current | This is a table to show the LLDP-MED remote device (neighbor) civic location information for a specific interface. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1 | Rowme1200LldpmedStatusRemoteDeviceLocInfoEntry | not-accessible | current | Each port has a set of neighbors information |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.1 | Columnme1200LldpmedStatusRemoteDeviceLocInfoIfIndex | not-accessible | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.2 | Columnme1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndex | not-accessible | current | Neighbor information table entry index. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.5 | Columnme1200LldpmedStatusRemoteDeviceLocInfoState | read-only | current | National subdivision |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.6 | Columnme1200LldpmedStatusRemoteDeviceLocInfoCounty | read-only | current | County |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.7 | Columnme1200LldpmedStatusRemoteDeviceLocInfoCity | read-only | current | City |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.8 | Columnme1200LldpmedStatusRemoteDeviceLocInfoCityDistrict | read-only | current | City district |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.9 | Columnme1200LldpmedStatusRemoteDeviceLocInfoBlock | read-only | current | Block (Neighborhood) |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.10 | Columnme1200LldpmedStatusRemoteDeviceLocInfoStreet | read-only | current | Street |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.11 | Columnme1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirection | read-only | current | Street Direction |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.12 | Columnme1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffix | read-only | current | Trailling Street |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.13 | Columnme1200LldpmedStatusRemoteDeviceLocInfoStreetSuffix | read-only | current | Street Suffix |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.14 | Columnme1200LldpmedStatusRemoteDeviceLocInfoHouseNo | read-only | current | House No. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.15 | Columnme1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffix | read-only | current | House No. Suffix |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.16 | Columnme1200LldpmedStatusRemoteDeviceLocInfoLandmark | read-only | current | Landmark |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.17 | Columnme1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfo | read-only | current | Additional Location Info |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.18 | Columnme1200LldpmedStatusRemoteDeviceLocInfoName | read-only | current | Name |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.19 | Columnme1200LldpmedStatusRemoteDeviceLocInfoZipCode | read-only | current | Zip Code |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.20 | Columnme1200LldpmedStatusRemoteDeviceLocInfoBuilding | read-only | current | Building |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.21 | Columnme1200LldpmedStatusRemoteDeviceLocInfoApartment | read-only | current | Unit |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.22 | Columnme1200LldpmedStatusRemoteDeviceLocInfoFloor | read-only | current | Floor |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.23 | Columnme1200LldpmedStatusRemoteDeviceLocInfoRoomNumber | read-only | current | Room No. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.24 | Columnme1200LldpmedStatusRemoteDeviceLocInfoPlaceType | read-only | current | Placetype |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.25 | Columnme1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityName | read-only | current | Postal Community Name |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.26 | Columnme1200LldpmedStatusRemoteDeviceLocInfoPoBox | read-only | current | P.O. Box |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.27 | Columnme1200LldpmedStatusRemoteDeviceLocInfoAdditionalCode | read-only | current | Addination Code |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.28 | Columnme1200LldpmedStatusRemoteDeviceLocInfoCountryCode | read-only | current | The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5 | Tableme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTable | not-accessible | current | This is a table to show the LLDP-MED remote device (neighbor) network policies information for a specific interface. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1 | Rowme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry | not-accessible | current | Each port has a set of neighbors information |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.1 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndex | not-accessible | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.2 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndex | not-accessible | current | Neighbor information table entry index. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.3 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndex | not-accessible | current | Logical Policy index. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.5 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationType | read-only | current | The LLDP policy application type. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.6 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicy | read-only | current | Policy indicates that an Endpoint Device wants to explicitly advertise that the policy is required by the device. Can be either Defined or Unknown Unknown: The… |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.7 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTagged | read-only | current | Defines if LLDP policy uses tagged VLAN. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.8 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanId | read-only | current | The policy VLAN ID. Only valid when policy 'Tagged' is TRUE. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.9 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2Priority | read-only | current | Shows the LLDP neighbor's policy L2 priority. Only valid when policy 'Tagged' is TRUE. |
| 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.10 | Columnme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscp | read-only | current | LLDP policy DSCP. |
| 1.3.6.1.4.1.9.9.815.1.71.1.4 | Nodeme1200LldpmedControl | |||
| 1.3.6.1.4.1.9.9.815.1.71.2 | Nodeme1200LldpmedMibConformance | |||
| 1.3.6.1.4.1.9.9.815.1.71.2.1 | Nodeme1200LldpmedMibCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.71.2.1.1 | Complianceme1200LldpmedMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2 | Nodeme1200LldpmedMibGroups | |||
| 1.3.6.1.4.1.9.9.815.1.71.2.2.1 | Groupme1200LldpmedConfigGlobalInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.2 | Groupme1200LldpmedConfigLocationInformationInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.3 | Groupme1200LldpmedConfigInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.4 | Groupme1200LldpmedConfigPolicyInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.5 | Groupme1200LldpmedConfigPolicyListInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.6 | Groupme1200LldpmedConfigPolicyRowEditorInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.7 | Groupme1200LldpmedStatusRemoteDeviceInfoInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.8 | Groupme1200LldpmedStatusRemoteDeviceLocInfoInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.71.2.2.9 | Groupme1200LldpmedStatusRemoteDeviceNetworkPolicyInfoInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200lldpmedAltitudeType | INTEGER { meters(1), floor(2) } | current | This enumerations the altitude type. |
| ME1200lldpmedDatumType | INTEGER { wgs84(1), nad83navd88(2), nad83mllw(3) } | current | This enumerations the datum (geodetic system). |
| ME1200lldpmedDeviceType | INTEGER { connectivity(0), endpoint(1) } | current | This enumerations the device type that the device shall operate as. |
| ME1200lldpmedRemoteDeviceType | INTEGER { notDefined(0), endpointClassI(1), endpointClassII(2), endpointClassIII(3), networkConnectivity(4), reserved(5) } | current | This enumerations the remote neighbor's device type. |
| ME1200lldpmedRemoteNetworkPolicyApplicationType | INTEGER { voice(1), voiceSignaling(2), guestVoice(3), gustVoiceSignaling(4), softphoneVoice(5), videoConferencing(6), streamingVideo(7), videoSignaling(8) } | current | This enumerations the remote neighbor's network policy's application type. |