ME1200-LOOP-PROTECTION-MIB
35 objects
This is a private MIB for loop protection
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| ME1200-TC | ME1200InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.91 | Identityme1200LoopProtectionMib | This is a private MIB for loop protection | ||
| 1.3.6.1.4.1.9.9.815.1.91.1 | Nodeme1200LoopProtectionObjects | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.2 | Nodeme1200LoopProtectionConfig | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.2.1 | Nodeme1200LoopProtectionGlobals | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.2.1.1 | Scalarme1200LoopProtectionGlobalsEnabled | read-write | current | Global enabled for loop protection on any port. |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.1.2 | Scalarme1200LoopProtectionGlobalsTransmitInterval | read-write | current | Port transmission interval (seconds). Valid range: 1-10 seconds. |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.1.3 | Scalarme1200LoopProtectionGlobalsShutdownPeriod | read-write | current | Port shutdown period (seconds). Valid range: 0 to 604800 seconds. |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2 | Nodeme1200LoopProtectionConfigInterface | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1 | Tableme1200LoopProtectionInterfaceParamTable | not-accessible | current | This is a table of loop protection interface parameters |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1 | Rowme1200LoopProtectionInterfaceParamEntry | not-accessible | current | Each physical interface has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.1 | Columnme1200LoopProtectionInterfaceParamIfIndex | not-accessible | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.2 | Columnme1200LoopProtectionInterfaceParamEnabled | read-write | current | Enabled loop protection on port |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.3 | Columnme1200LoopProtectionInterfaceParamAction | read-write | current | Action if loop detected |
| 1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.4 | Columnme1200LoopProtectionInterfaceParamTransmit | read-write | current | Actively generate PDUs |
| 1.3.6.1.4.1.9.9.815.1.91.1.3 | Nodeme1200LoopProtectionStatus | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2 | Nodeme1200LoopProtectionStatusInterface | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2.1 | Tableme1200LoopProtectionInterfaceStatusTable | not-accessible | current | This is a table of loop protection interface status |
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1 | Rowme1200LoopProtectionInterfaceStatusEntry | not-accessible | current | Each physical interface has a set of status objects |
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.1 | Columnme1200LoopProtectionInterfaceStatusIfIndex | not-accessible | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.2 | Columnme1200LoopProtectionInterfaceStatusDisabled | read-only | current | Whether a port is currently disabled |
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.3 | Columnme1200LoopProtectionInterfaceStatusLoopDetected | read-only | current | Whether a port has a loop detected |
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.4 | Columnme1200LoopProtectionInterfaceStatusLoopCount | read-only | current | Number of times a loop has been detected on a port |
| 1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.5 | Columnme1200LoopProtectionInterfaceStatusLastLoop | read-only | current | Time of last loop condition |
| 1.3.6.1.4.1.9.9.815.1.91.1.4 | Nodeme1200LoopProtectionNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.4.0 | Nodeme1200LoopProtectionNotification | |||
| 1.3.6.1.4.1.9.9.815.1.91.1.4.0.1 | Notificationme1200LoopProtectionNotificationLoopDetected | current | Notification is sent when a loop is detected. | |
| 1.3.6.1.4.1.9.9.815.1.91.2 | Nodeme1200LoopProtectionMibConformance | |||
| 1.3.6.1.4.1.9.9.815.1.91.2.1 | Nodeme1200LoopProtectionMibCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.91.2.1.1 | Complianceme1200LoopProtectionMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.91.2.2 | Nodeme1200LoopProtectionMibGroups | |||
| 1.3.6.1.4.1.9.9.815.1.91.2.2.1 | Groupme1200LoopProtectionGlobalsInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.91.2.2.2 | Groupme1200LoopProtectionInterfaceParamTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.91.2.2.3 | Groupme1200LoopProtectionInterfaceStatusTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.91.2.2.4 | Groupme1200LoopProtectionNotificationInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200LoopProtectionAction | INTEGER { shutdown(0), shutdownAndLogEvent(1), logEvent(2) } | current | This enumeration defines the available actions for when a loop on an interface is detected. |