ME1200-QOS-MIB
311 objects
This is a private MIB for QoS
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| DIFFSERV-DSCP-TC | Dscp |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| ME1200-TC | ME1200EtherType ME1200InterfaceIndex ME1200Percent ME1200PortList ME1200RowEditorState ME1200Unsigned16 ME1200Unsigned8 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.14 | Identityme1200QosMIB | This is a private MIB for QoS | ||
| 1.3.6.1.4.1.9.9.815.1.14.1 | Nodeme1200QosMIBObjects | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2 | Nodeme1200QosConfig | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1 | Nodeme1200QosGlobals | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1 | Nodeme1200QosStormPolicers | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1 | Nodeme1200QosStormPolicerUnicast | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1.1 | Scalarme1200QosStormPolicerUnicastEnable | read-write | current | If true, the storm policer is enabled. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1.2 | Scalarme1200QosStormPolicerUnicastRate | read-write | current | Configure the storm policer rate in frames/second. Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2 | Nodeme1200QosStormPolicerMulticast | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2.1 | Scalarme1200QosStormPolicerMulticastEnable | read-write | current | If true, the storm policer is enabled. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2.2 | Scalarme1200QosStormPolicerMulticastRate | read-write | current | Configure the storm policer rate in frames/second. Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3 | Nodeme1200QosStormPolicerBroadcast | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3.1 | Scalarme1200QosStormPolicerBroadcastEnable | read-write | current | If true, the storm policer is enabled. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3.2 | Scalarme1200QosStormPolicerBroadcastRate | read-write | current | Configure the storm policer rate in frames/second. Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2 | Tableme1200QosWredTable | not-accessible | current | This table contains the configuration of WRED for queue 0 through 5 |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1 | Rowme1200QosWredEntry | not-accessible | current | Each row contains the configuration for a specific queue |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.1 | Columnme1200QosWredQueue | not-accessible | current | Queue index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.2 | Columnme1200QosWredEnable | read-write | current | If true, RED is enabled for this queue |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.3 | Columnme1200QosWredMinimumFillLevel | read-write | current | Controls the lower RED fill level threshold in percent of the whole queue. If the queue filling level is below this threshold, the drop probability is zero. Va… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.4 | Columnme1200QosWredMaximum | read-write | current | Controls the upper RED drop probability or fill level threshold for frames marked with Drop Precedence Level 1 (yellow frames). Valid range is 1-100 |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.5 | Columnme1200QosWredMaxSelector | read-write | current | Selects whether 'Maximum' controls 'Maximum Drop Probability' or 'Maximum Fill Level'. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3 | Tableme1200QosDscpTable | not-accessible | current | This table has 64 entries, one for each DSCP value |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1 | Rowme1200QosDscpEntry | not-accessible | current | Each row contains the configuration for a specific DSCP |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.1 | Columnme1200QosDscpDscp | not-accessible | current | DSCP index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.2 | Columnme1200QosDscpTrust | read-write | current | If true, this DSCP value is trusted. Packets arriving on interfaces where 'TrustDscp' is enabled will be classified to the corresponding CoS and DPL in this ta… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.3 | Columnme1200QosDscpCos | read-write | current | The CoS value which the DSCP value maps to. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.4 | Columnme1200QosDscpDpl | read-write | current | The DPL (Drop Precedence Level) which the DSCP value maps to. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.5 | Columnme1200QosDscpIngressTranslation | read-write | current | The new classified DSCP value which the original DSCP value is replaced with if 'DscpTranslate' is enabled on the interface |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.6 | Columnme1200QosDscpClassify | read-write | current | If true, then packets received on interfaces where 'DscpClassify' is set to 'selected' will be classified to a new DSCP value based on the classified CoS and D… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.7 | Columnme1200QosDscpEgressTranslation | read-write | current | The new DSCP value that will be written into the packet at egress if 'DscpRemark' on the interface is set to 'remap' or 'remap-dp'. If 'remap-dp' is set then o… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.8 | Columnme1200QosDscpEgressTranslationDp1 | read-write | current | The new DSCP value that will be written into the packet at egress if 'DscpRemark' on the interface is set to 'remap-dp'. Only packets classified to Dpl 1 will … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4 | Tableme1200QosCosToDscpTable | not-accessible | current | This table has QOS_CLASS_CNT entries, one for each Cos value |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1 | Rowme1200QosCosToDscpEntry | not-accessible | current | Each row contains the configuration for a specific Cos |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.1 | Columnme1200QosCosToDscpCos | not-accessible | current | CoS index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.2 | Columnme1200QosCosToDscpDscp | read-write | current | The DSCP value which the classified CoS value maps to when the classified DPL is 0. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.3 | Columnme1200QosCosToDscpDscpDp1 | read-write | current | The DSCP value which the classified CoS value maps to when the classified DPL is 1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10 | Nodeme1200QosQce | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1 | Tableme1200QosQceTable | not-accessible | current | This table contains the configuration of QCEs. The index is QceId. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1 | Rowme1200QosQceEntry | not-accessible | current | Each row contains the configuration of a single QCE. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1 | Columnme1200QosQceQceId | not-accessible | current | QCE Id index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.2 | Columnme1200QosQceNextQceId | read-write | current | QCE Id of the next QCE. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.4 | Columnme1200QosQcePortList | read-write | current | List of ports that are member of this QCE. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.5 | Columnme1200QosQceDestMacType | read-write | current | Indicates the destination MAC type to match. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.6 | Columnme1200QosQceDestMac | read-write | current | Indicates the 48 bits destination MAC address. The packets destination address is AND-ed with the value of DestMacMask and then compared against the value of t… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.7 | Columnme1200QosQceDestMacMask | read-write | current | Indicates the 48 bits destination MAC address mask.Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.8 | Columnme1200QosQceSrcMac | read-write | current | Indicates the 48 bits source MAC address. The packets source address is AND-ed with the value of SrcMacMask and then compared against the value of this object.… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.9 | Columnme1200QosQceSrcMacMask | read-write | current | Indicates the 48 bits source MAC address mask. Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10 | Columnme1200QosQceVlanTagType | read-write | current | Indicates the VLAN tag type to match. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.11 | Columnme1200QosQceVlanIdOp | read-write | current | Indicates how a packets's VLAN ID is to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.12 | Columnme1200QosQceVlanId | read-write | current | The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range is 1-4095. T… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.13 | Columnme1200QosQceVlanIdRange | read-write | current | The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is 1-4095. Thi… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.14 | Columnme1200QosQcePcp | read-write | current | The PCP value(s) to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.15 | Columnme1200QosQceDei | read-write | current | The DEI value to be compared. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.16 | Columnme1200QosQceInnerVlanTagType | read-write | current | Indicates the inner VLAN tag type to match. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.17 | Columnme1200QosQceInnerVlanIdOp | read-write | current | Indicates how a packets's inner VLAN ID is to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.18 | Columnme1200QosQceInnerVlanId | read-write | current | The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range i… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.19 | Columnme1200QosQceInnerVlanIdRange | read-write | current | The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.20 | Columnme1200QosQceInnerPcp | read-write | current | The inner PCP value(s) to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.21 | Columnme1200QosQceInnerDei | read-write | current | The inner DEI value to be compared. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.100 | Columnme1200QosQceFrameType | read-write | current | Indicates the packet's frame type. Modifying the frame type on an existing QCE will restore the content of all frame type dependent configuration to default. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.101 | Columnme1200QosQceEtype | read-write | current | Indicates the packet's 16 bit Ethernet type field. Valid values are: 0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and 0x86DD(IPv6).This object can only… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.200 | Columnme1200QosQceLlcDsap | read-write | current | Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP field is AND-ed with the value of LlcDsapMask and then compared against the value of this ob… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.201 | Columnme1200QosQceLlcDsapMask | read-write | current | Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.202 | Columnme1200QosQceLlcSsap | read-write | current | Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP field is AND-ed with the value of LlcSsapMask and then compared against the value of this ob… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.203 | Columnme1200QosQceLlcSsapMask | read-write | current | Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.204 | Columnme1200QosQceLlcControl | read-write | current | Indicates the packets's 8 bit LLC Control field. The packets LLC Control field is AND-ed with the value of LlcControlMask and then compared against the value o… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.205 | Columnme1200QosQceLlcControlMask | read-write | current | Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.302 | Columnme1200QosQceSnapPid | read-write | current | Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID field is AND-ed with the value of SnapPidMask and then compared against the value of this ob… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.303 | Columnme1200QosQceSnapPidMask | read-write | current | Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF. This object can only be configured if FrameType is snap(3). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.400 | Columnme1200QosQceIpv4Fragment | read-write | current | Indicates how an IPv4 fragment bit is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.401 | Columnme1200QosQceIpv4DscpOp | read-write | current | Indicates how an IPv4 DSCP field is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.402 | Columnme1200QosQceIpv4Dscp | read-write | current | The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.403 | Columnme1200QosQceIpv4DscpRange | read-write | current | The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-6… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.404 | Columnme1200QosQceIpv4Protocol | read-write | current | The protocol number field in the IPv4 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv4Protoc… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.405 | Columnme1200QosQceIpv4ProtocolMask | read-write | current | The specified IPv4 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.406 | Columnme1200QosQceIpv4SrcIp | read-write | current | The specified IPv4 source address. The packets source address is AND-ed with the value of Ipv4SrcIpMask and then compared with the value of this object. If Ipv… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.407 | Columnme1200QosQceIpv4SrcIpMask | read-write | current | The specified IPv4 source address mask. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.408 | Columnme1200QosQceIpv4DestIp | read-write | current | The specified IPv4 destination address. The packets destination address is AND-ed with the value of Ipv4DestIpMask and then compared with the value of this obj… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.409 | Columnme1200QosQceIpv4DestIpMask | read-write | current | The specified IPv4 destination address mask. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.410 | Columnme1200QosQceIpv4SrcPortOp | read-write | current | Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.411 | Columnme1200QosQceIpv4SrcPort | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the starting port number of the… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.412 | Columnme1200QosQceIpv4SrcPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the ending port number of the p… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.413 | Columnme1200QosQceIpv4DestPortOp | read-write | current | Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.414 | Columnme1200QosQceIpv4DestPort | read-write | current | The destination port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the starting port number … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.415 | Columnme1200QosQceIpv4DestPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the ending port number of the … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.500 | Columnme1200QosQceIpv6DscpOp | read-write | current | Indicates how an IPv6 DSCP field is to be compared. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.501 | Columnme1200QosQceIpv6Dscp | read-write | current | The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.502 | Columnme1200QosQceIpv6DscpRange | read-write | current | The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-6… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.503 | Columnme1200QosQceIpv6Protocol | read-write | current | The protocol number field in the IPv6 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv6Protoc… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.504 | Columnme1200QosQceIpv6ProtocolMask | read-write | current | The specified IPv6 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.506 | Columnme1200QosQceIpv6SrcIp | read-write | current | The specified IPv6 source address. The packets source address is AND-ed with the value of Ipv6SrcIpMask and then compared with the value of this object. If Ipv… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.508 | Columnme1200QosQceIpv6SrcIpMask | read-write | current | The specified IPv6 source address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.510 | Columnme1200QosQceIpv6DestIp | read-write | current | The specified IPv6 destination address. The packets destination address is AND-ed with the value of Ipv6DestIpMask and then compared with the value of this obj… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.512 | Columnme1200QosQceIpv6DestIpMask | read-write | current | The specified IPv6 destination address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.513 | Columnme1200QosQceIpv6SrcPortOp | read-write | current | Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.514 | Columnme1200QosQceIpv6SrcPort | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the starting port number of the… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.515 | Columnme1200QosQceIpv6SrcPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the ending port number of the p… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.516 | Columnme1200QosQceIpv6DestPortOp | read-write | current | Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.517 | Columnme1200QosQceIpv6DestPort | read-write | current | The destination port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the starting port number … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.518 | Columnme1200QosQceIpv6DestPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the ending port number of the … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1000 | Columnme1200QosQceActionCosEnable | read-write | current | If true, the packet is classified to the CoS value in ActionCos. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1001 | Columnme1200QosQceActionCos | read-write | current | The CoS value used for classification. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1002 | Columnme1200QosQceActionDplEnable | read-write | current | If true, the packet is classified to the DPL value in ActionDpl. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1003 | Columnme1200QosQceActionDpl | read-write | current | The DPL value used for classification. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1004 | Columnme1200QosQceActionDscpEnable | read-write | current | If true, the packet is classified to the DSCP value in ActionDscp. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1005 | Columnme1200QosQceActionDscp | read-write | current | The DSCP value used for classification. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1006 | Columnme1200QosQceActionPcpDeiEnable | read-write | current | If true, the packet is classified to the PCP value in ActionPcp and the DEI value in ActionDei. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1007 | Columnme1200QosQceActionPcp | read-write | current | The PCP value used for classification. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1008 | Columnme1200QosQceActionDei | read-write | current | The DEI value used for classification. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1009 | Columnme1200QosQceActionPolicyEnable | read-write | current | If true, the packet is classified to the policy number in ActionPolicy. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1010 | Columnme1200QosQceActionPolicy | read-write | current | The policy number used for classification. Valid range is 0-63. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10000 | Columnme1200QosQceAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2 | Nodeme1200QosQceTableRowEditor | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1 | Scalarme1200QosQceTableRowEditorQceId | read-write | current | QCE Id index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.2 | Scalarme1200QosQceTableRowEditorNextQceId | read-write | current | QCE Id of the next QCE. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.4 | Scalarme1200QosQceTableRowEditorPortList | read-write | current | List of ports that are member of this QCE. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.5 | Scalarme1200QosQceTableRowEditorDestMacType | read-write | current | Indicates the destination MAC type to match. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6 | Scalarme1200QosQceTableRowEditorDestMac | read-write | current | Indicates the 48 bits destination MAC address. The packets destination address is AND-ed with the value of DestMacMask and then compared against the value of t… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.7 | Scalarme1200QosQceTableRowEditorDestMacMask | read-write | current | Indicates the 48 bits destination MAC address mask.Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.8 | Scalarme1200QosQceTableRowEditorSrcMac | read-write | current | Indicates the 48 bits source MAC address. The packets source address is AND-ed with the value of SrcMacMask and then compared against the value of this object.… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.9 | Scalarme1200QosQceTableRowEditorSrcMacMask | read-write | current | Indicates the 48 bits source MAC address mask. Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10 | Scalarme1200QosQceTableRowEditorVlanTagType | read-write | current | Indicates the VLAN tag type to match. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.11 | Scalarme1200QosQceTableRowEditorVlanIdOp | read-write | current | Indicates how a packets's VLAN ID is to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.12 | Scalarme1200QosQceTableRowEditorVlanId | read-write | current | The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range is 1-4095. T… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.13 | Scalarme1200QosQceTableRowEditorVlanIdRange | read-write | current | The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is 1-4095. Thi… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.14 | Scalarme1200QosQceTableRowEditorPcp | read-write | current | The PCP value(s) to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.15 | Scalarme1200QosQceTableRowEditorDei | read-write | current | The DEI value to be compared. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.16 | Scalarme1200QosQceTableRowEditorInnerVlanTagType | read-write | current | Indicates the inner VLAN tag type to match. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.17 | Scalarme1200QosQceTableRowEditorInnerVlanIdOp | read-write | current | Indicates how a packets's inner VLAN ID is to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.18 | Scalarme1200QosQceTableRowEditorInnerVlanId | read-write | current | The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range i… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.19 | Scalarme1200QosQceTableRowEditorInnerVlanIdRange | read-write | current | The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.20 | Scalarme1200QosQceTableRowEditorInnerPcp | read-write | current | The inner PCP value(s) to be compared. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.21 | Scalarme1200QosQceTableRowEditorInnerDei | read-write | current | The inner DEI value to be compared. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.100 | Scalarme1200QosQceTableRowEditorFrameType | read-write | current | Indicates the packet's frame type. Modifying the frame type on an existing QCE will restore the content of all frame type dependent configuration to default. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.101 | Scalarme1200QosQceTableRowEditorEtype | read-write | current | Indicates the packet's 16 bit Ethernet type field. Valid values are: 0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and 0x86DD(IPv6).This object can only… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.200 | Scalarme1200QosQceTableRowEditorLlcDsap | read-write | current | Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP field is AND-ed with the value of LlcDsapMask and then compared against the value of this ob… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.201 | Scalarme1200QosQceTableRowEditorLlcDsapMask | read-write | current | Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.202 | Scalarme1200QosQceTableRowEditorLlcSsap | read-write | current | Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP field is AND-ed with the value of LlcSsapMask and then compared against the value of this ob… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.203 | Scalarme1200QosQceTableRowEditorLlcSsapMask | read-write | current | Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.204 | Scalarme1200QosQceTableRowEditorLlcControl | read-write | current | Indicates the packets's 8 bit LLC Control field. The packets LLC Control field is AND-ed with the value of LlcControlMask and then compared against the value o… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.205 | Scalarme1200QosQceTableRowEditorLlcControlMask | read-write | current | Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.302 | Scalarme1200QosQceTableRowEditorSnapPid | read-write | current | Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID field is AND-ed with the value of SnapPidMask and then compared against the value of this ob… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.303 | Scalarme1200QosQceTableRowEditorSnapPidMask | read-write | current | Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF. This object can only be configured if FrameType is snap(3). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.400 | Scalarme1200QosQceTableRowEditorIpv4Fragment | read-write | current | Indicates how an IPv4 fragment bit is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.401 | Scalarme1200QosQceTableRowEditorIpv4DscpOp | read-write | current | Indicates how an IPv4 DSCP field is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.402 | Scalarme1200QosQceTableRowEditorIpv4Dscp | read-write | current | The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.403 | Scalarme1200QosQceTableRowEditorIpv4DscpRange | read-write | current | The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-6… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.404 | Scalarme1200QosQceTableRowEditorIpv4Protocol | read-write | current | The protocol number field in the IPv4 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv4Protoc… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.405 | Scalarme1200QosQceTableRowEditorIpv4ProtocolMask | read-write | current | The specified IPv4 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.406 | Scalarme1200QosQceTableRowEditorIpv4SrcIp | read-write | current | The specified IPv4 source address. The packets source address is AND-ed with the value of Ipv4SrcIpMask and then compared with the value of this object. If Ipv… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.407 | Scalarme1200QosQceTableRowEditorIpv4SrcIpMask | read-write | current | The specified IPv4 source address mask. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.408 | Scalarme1200QosQceTableRowEditorIpv4DestIp | read-write | current | The specified IPv4 destination address. The packets destination address is AND-ed with the value of Ipv4DestIpMask and then compared with the value of this obj… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.409 | Scalarme1200QosQceTableRowEditorIpv4DestIpMask | read-write | current | The specified IPv4 destination address mask. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.410 | Scalarme1200QosQceTableRowEditorIpv4SrcPortOp | read-write | current | Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411 | Scalarme1200QosQceTableRowEditorIpv4SrcPort | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the starting port number of the… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.412 | Scalarme1200QosQceTableRowEditorIpv4SrcPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the ending port number of the p… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.413 | Scalarme1200QosQceTableRowEditorIpv4DestPortOp | read-write | current | Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414 | Scalarme1200QosQceTableRowEditorIpv4DestPort | read-write | current | The destination port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the starting port number … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.415 | Scalarme1200QosQceTableRowEditorIpv4DestPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the ending port number of the … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.500 | Scalarme1200QosQceTableRowEditorIpv6DscpOp | read-write | current | Indicates how an IPv6 DSCP field is to be compared. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.501 | Scalarme1200QosQceTableRowEditorIpv6Dscp | read-write | current | The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.502 | Scalarme1200QosQceTableRowEditorIpv6DscpRange | read-write | current | The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-6… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.503 | Scalarme1200QosQceTableRowEditorIpv6Protocol | read-write | current | The protocol number field in the IPv6 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv6Protoc… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.504 | Scalarme1200QosQceTableRowEditorIpv6ProtocolMask | read-write | current | The specified IPv6 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506 | Scalarme1200QosQceTableRowEditorIpv6SrcIp | read-write | current | The specified IPv6 source address. The packets source address is AND-ed with the value of Ipv6SrcIpMask and then compared with the value of this object. If Ipv… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.508 | Scalarme1200QosQceTableRowEditorIpv6SrcIpMask | read-write | current | The specified IPv6 source address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510 | Scalarme1200QosQceTableRowEditorIpv6DestIp | read-write | current | The specified IPv6 destination address. The packets destination address is AND-ed with the value of Ipv6DestIpMask and then compared with the value of this obj… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.512 | Scalarme1200QosQceTableRowEditorIpv6DestIpMask | read-write | current | The specified IPv6 destination address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.513 | Scalarme1200QosQceTableRowEditorIpv6SrcPortOp | read-write | current | Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.514 | Scalarme1200QosQceTableRowEditorIpv6SrcPort | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the starting port number of the… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.515 | Scalarme1200QosQceTableRowEditorIpv6SrcPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the ending port number of the p… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.516 | Scalarme1200QosQceTableRowEditorIpv6DestPortOp | read-write | current | Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.517 | Scalarme1200QosQceTableRowEditorIpv6DestPort | read-write | current | The destination port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the starting port number … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.518 | Scalarme1200QosQceTableRowEditorIpv6DestPortRange | read-write | current | The source port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the ending port number of the … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1000 | Scalarme1200QosQceTableRowEditorActionCosEnable | read-write | current | If true, the packet is classified to the CoS value in ActionCos. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1001 | Scalarme1200QosQceTableRowEditorActionCos | read-write | current | The CoS value used for classification. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1002 | Scalarme1200QosQceTableRowEditorActionDplEnable | read-write | current | If true, the packet is classified to the DPL value in ActionDpl. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1003 | Scalarme1200QosQceTableRowEditorActionDpl | read-write | current | The DPL value used for classification. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1004 | Scalarme1200QosQceTableRowEditorActionDscpEnable | read-write | current | If true, the packet is classified to the DSCP value in ActionDscp. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1005 | Scalarme1200QosQceTableRowEditorActionDscp | read-write | current | The DSCP value used for classification. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1006 | Scalarme1200QosQceTableRowEditorActionPcpDeiEnable | read-write | current | If true, the packet is classified to the PCP value in ActionPcp and the DEI value in ActionDei. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1007 | Scalarme1200QosQceTableRowEditorActionPcp | read-write | current | The PCP value used for classification. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1008 | Scalarme1200QosQceTableRowEditorActionDei | read-write | current | The DEI value used for classification. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1009 | Scalarme1200QosQceTableRowEditorActionPolicyEnable | read-write | current | If true, the packet is classified to the policy number in ActionPolicy. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1010 | Scalarme1200QosQceTableRowEditorActionPolicy | read-write | current | The policy number used for classification. Valid range is 0-63. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10000 | Scalarme1200QosQceTableRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3 | Tableme1200QosQcePrecedenceTable | not-accessible | current | This table contains the precedence of QCEs ordered by their position in the QCL. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1 | Rowme1200QosQcePrecedenceEntry | not-accessible | current | Each row contains the precedence of a single QCE. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.1 | Columnme1200QosQcePrecedenceIndex | not-accessible | current | QCE precedence index. Indicates the position in QCL. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.2 | Columnme1200QosQcePrecedenceQceId | read-only | current | QCE Id. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2 | Nodeme1200QosInterface | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1 | Tableme1200QosIfConfigTable | not-accessible | current | This table provides QoS configuration for QoS manageable interfaces |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1 | Rowme1200QosIfConfigEntry | not-accessible | current | Each row contains the configuration for a specific interface |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.1 | Columnme1200QosIfConfigIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.2 | Columnme1200QosIfConfigCos | read-write | current | The default CoS value a packet is classified to. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.3 | Columnme1200QosIfConfigDpl | read-write | current | The default DPL (Drop Precedence Level) a packet is classified to. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.4 | Columnme1200QosIfConfigPcp | read-write | current | The default PCP value a packet is classified to. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.5 | Columnme1200QosIfConfigDei | read-write | current | The default DEI value a packet is classified to. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.6 | Columnme1200QosIfConfigTrustTag | read-write | current | If true and the packet is VLAN tagged, then the CoS and DPL assigned to the packet is the PCP and DEI value in the packet mapped to a CoS and DPL value defined… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.7 | Columnme1200QosIfConfigTrustDscp | read-write | current | If true and the packet type is IPv4 or IPv6 and the packet DSCP value is trusted in qosDscpTable, then the CoS and DPL assigned to the packet is the DSCP value… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.8 | Columnme1200QosIfConfigDwrrCount | read-write | current | The number of queues that are running Deficit Weighted Round Robin scheduling. This value is restricted to 0 or 6. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.9 | Columnme1200QosIfConfigTagRemarkingMode | read-write | current | Selects the tag remarking mode for egress. Valid values are: 'classified' : Remark the tag with the classified values of PCP and DEI. 'default' : Remark the ta… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.10 | Columnme1200QosIfConfigTagPcp | read-write | current | The PCP value to put in the packet if TagRemarkingMode is set to 'default'. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.11 | Columnme1200QosIfConfigTagDei | read-write | current | The DEI value to put in the packet if TagRemarkingMode is set to 'default'. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.12 | Columnme1200QosIfConfigDscpTranslate | read-write | current | If true then the classified DSCP value is the DSCP value in the packed mapped to a new DSCP value defined in qosDscpTable.IngressTranslation. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13 | Columnme1200QosIfConfigDscpClassify | read-write | current | Selects if and how the classified DSCP is based on the classified CoS and DPL for IPv4 and IPv6 packets on ingress. If a packet is selected for being classifie… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14 | Columnme1200QosIfConfigDscpRemark | read-write | current | Selects if and how the classified DSCP is written into the packet at egress. Valid values are: 'disabled' : Do not write the classified DSCP into the packet. '… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.15 | Columnme1200QosIfConfigQceAddressMode | read-write | current | If false, the QCE classification for this interface is based on source (SMAC/SIP) addresses. If true, the QCE classification for this interface is based on des… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16 | Columnme1200QosIfConfigQceKeyType | read-write | current | The key type specifying the key generated for packets received on the interface. Valid values are: 'normal' : Half key, match outer tag, SIP and SMAC. 'double-… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2 | Tableme1200QosIfTagToCosTable | not-accessible | current | This table contains the mapping of (interface, PCP, DEI) to (CoS, DPL) values.The mappings given by this table is used for all tagged packets received on an in… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1 | Rowme1200QosIfTagToCosEntry | not-accessible | current | Each row contains the mapping from (interface, PCP, DEI) to (CoS, DPL) values. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.1 | Columnme1200QosIfTagToCosIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.2 | Columnme1200QosIfTagToCosPcp | not-accessible | current | PCP index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.3 | Columnme1200QosIfTagToCosDei | not-accessible | current | DEI index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.4 | Columnme1200QosIfTagToCosCos | read-write | current | The CoS value which this entry maps to. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.5 | Columnme1200QosIfTagToCosDpl | read-write | current | The DPL (Drop Precedence Level) value which this entry maps to. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3 | Tableme1200QosIfCosToTagTable | not-accessible | current | This table contains the mapping of (interface, CoS, DPL) to (PCP, DEI) values.The mappings given by this table is used for packets transmitted on an interface … |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1 | Rowme1200QosIfCosToTagEntry | not-accessible | current | Each row contains the mapping from (interface, CoS, DPL) to (PCP, DEI) values. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.1 | Columnme1200QosIfCosToTagIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.2 | Columnme1200QosIfCosToTagCos | not-accessible | current | CoS index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.3 | Columnme1200QosIfCosToTagDpl | not-accessible | current | DPL index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.4 | Columnme1200QosIfCosToTagPcp | read-write | current | The PCP value which this entry maps to. Valid range is 0-7. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.5 | Columnme1200QosIfCosToTagDei | read-write | current | The DEI value which this entry maps to. Valid range is 0-1. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4 | Tableme1200QosIfPolicerTable | not-accessible | current | This table provides policer configuration for an interface |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1 | Rowme1200QosIfPolicerEntry | not-accessible | current | Each row contains the configuration for a specific policer |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.1 | Columnme1200QosIfPolicerIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.2 | Columnme1200QosIfPolicerEnable | read-write | current | If true, the port policer is enabled. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.3 | Columnme1200QosIfPolicerFrameRate | read-write | current | If true, the rate is measured in fps instead of kbps. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.4 | Columnme1200QosIfPolicerFlowControl | read-write | current | If true, and flow control is enabled on the interface, then issue flow control pause frames instead of discarding frames. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.5 | Columnme1200QosIfPolicerCir | read-write | current | Committed Information Rate. Measured in kbps if FrameRate is false and fps if FrameRate is true. Valid range is 100-3300000. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5 | Tableme1200QosIfQueuePolicerTable | not-accessible | current | This table provides queue policer configuration for interfaces |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1 | Rowme1200QosIfQueuePolicerEntry | not-accessible | current | Each row contains the configuration for a specific queue policer |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.1 | Columnme1200QosIfQueuePolicerIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.2 | Columnme1200QosIfQueuePolicerQueue | not-accessible | current | Queue index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.3 | Columnme1200QosIfQueuePolicerEnable | read-write | current | If true, the queue policer is enabled. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.6 | Columnme1200QosIfQueuePolicerCir | read-write | current | Committed Information Rate. Measured in kbps. Valid range is 100-3300000. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6 | Tableme1200QosIfShaperTable | not-accessible | current | This table provides shaper configuration for an interface |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1 | Rowme1200QosIfShaperEntry | not-accessible | current | Each row contains the configuration for a specific shaper |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.1 | Columnme1200QosIfShaperIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.2 | Columnme1200QosIfShaperEnable | read-write | current | If true, the port shaper is enabled. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.3 | Columnme1200QosIfShaperCir | read-write | current | Committed Information Rate. Measured in kbps. Valid range is 100-3300000. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7 | Tableme1200QosIfQueueShaperTable | not-accessible | current | This table provides queue shaper configuration for interfaces |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1 | Rowme1200QosIfQueueShaperEntry | not-accessible | current | Each row contains the configuration for a specific queue shaper |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.1 | Columnme1200QosIfQueueShaperIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.2 | Columnme1200QosIfQueueShaperQueue | not-accessible | current | Queue index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.3 | Columnme1200QosIfQueueShaperEnable | read-write | current | If true, the queue shaper is enabled. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.4 | Columnme1200QosIfQueueShaperExcess | read-write | current | If true, then allow this queue to get a share of the excess bandwidth. Excess bandwidth is allowed if this shaper is closed and no other queues with open shape… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.5 | Columnme1200QosIfQueueShaperCir | read-write | current | Committed Information Rate. Measured in kbps. Valid range is 100-3300000. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8 | Tableme1200QosIfSchedulerTable | not-accessible | current | This table contains the mapping of (interface, queue) to weight values.The mappings given by this table is used when an interface has the value of DwrrCount gr… |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1 | Rowme1200QosIfSchedulerEntry | not-accessible | current | Each row contains the scheduler configuration for a specific queue. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.1 | Columnme1200QosIfSchedulerIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.2 | Columnme1200QosIfSchedulerQueue | not-accessible | current | Queue index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.3 | Columnme1200QosIfSchedulerWeight | read-write | current | The weight for this queue. Valid range is 1-100. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3 | Nodeme1200QosStatus | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1 | Nodeme1200QosStatusGlobals | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1 | Tableme1200QosStatusQceTable | not-accessible | current | This table contains the QCE status in the hardware table. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1 | Rowme1200QosStatusQceEntry | not-accessible | current | Each row contains the status of a single QCE. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.2 | Columnme1200QosStatusQceIndex | not-accessible | current | QCE precedence index. Indicates the position in QCL. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.3 | Columnme1200QosStatusQceUserId | read-only | current | User Id. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.4 | Columnme1200QosStatusQceQceId | read-only | current | QCE Id. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.100 | Columnme1200QosStatusQceConflict | read-only | current | If true, a resource conflict is detected. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2 | Nodeme1200QosStatusInterface | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1 | Tableme1200QosStatusIfTable | not-accessible | current | This table provides QoS status for QoS manageable interfaces |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1 | Rowme1200QosStatusIfEntry | not-accessible | current | Each row contains the status for a specific interface |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.1 | Columnme1200QosStatusIfIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.2 | Columnme1200QosStatusIfCos | read-only | current | Some subsystems are allowed to modify the default CoS value for an interface. This object shows the actual default CoS value a packet is classified to. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2 | Tableme1200QosStatusIfSchedulerTable | not-accessible | current | This table contains the mapping of (interface, queue) to weight values.The mappings given by this table are the 'real' weights in percent as used by the hardwa… |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1 | Rowme1200QosStatusIfSchedulerEntry | not-accessible | current | Each row contains the scheduler status for a specific queue. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.1 | Columnme1200QosStatusIfSchedulerIfIndex | not-accessible | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.2 | Columnme1200QosStatusIfSchedulerQueue | not-accessible | current | Queue index. |
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.3 | Columnme1200QosStatusIfSchedulerWeight | read-only | current | The weight for this queue. Valid range is 1-100. |
| 1.3.6.1.4.1.9.9.815.1.14.1.4 | Nodeme1200QosControl | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.4.1 | Nodeme1200QosControlGlobals | |||
| 1.3.6.1.4.1.9.9.815.1.14.1.4.1.1 | Scalarme1200QosControlGlobalsConflictResolve | read-write | current | Set to true to resolve resource conflicts. If different components, such as ACEs, ECEs, VCEs, QCEs, competes for the same resources in the switch, it is possib… |
| 1.3.6.1.4.1.9.9.815.1.14.3 | Nodeme1200QosMIBConformance | |||
| 1.3.6.1.4.1.9.9.815.1.14.3.1 | Nodeme1200QosMIBCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.14.3.1.1 | Complianceme1200QosMIBCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2 | Nodeme1200QosMIBGroups | |||
| 1.3.6.1.4.1.9.9.815.1.14.3.2.1 | Groupme1200QosStormPolicerUnicastInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.2 | Groupme1200QosStormPolicerMulticastInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.3 | Groupme1200QosStormPolicerBroadcastInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.4 | Groupme1200QosWredTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.5 | Groupme1200QosDscpTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.6 | Groupme1200QosCosToDscpTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.7 | Groupme1200QosQceTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.8 | Groupme1200QosQceTableRowEditorInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.9 | Groupme1200QosQcePrecedenceTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.10 | Groupme1200QosIfConfigTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.11 | Groupme1200QosIfTagToCosTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.12 | Groupme1200QosIfCosToTagTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.13 | Groupme1200QosIfPolicerTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.14 | Groupme1200QosIfQueuePolicerTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.15 | Groupme1200QosIfShaperTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.16 | Groupme1200QosIfQueueShaperTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.17 | Groupme1200QosIfSchedulerTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.18 | Groupme1200QosStatusQceTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.19 | Groupme1200QosStatusIfTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.20 | Groupme1200QosStatusIfSchedulerTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.14.3.2.21 | Groupme1200QosControlGlobalsInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200ASRType | INTEGER { any(0), specific(1), range(2) } | current | Represents an Any/Specific/Range selector. |
| ME1200BitType | INTEGER { any(0), zero(1), one(2) } | current | Represents a bit selector. |
| ME1200DestMacType | INTEGER { any(0), unicast(1), multicast(2), broadcast(3) } | current | Represents a destination MAC type selector. |
| ME1200DscpClassify | INTEGER { none(0), zero(1), selected(2), all(3) } | current | An integer that indicates the DSCP classify mode. |
| ME1200DscpRemark | INTEGER { disabled(0), rewrite(1), remap(2), remapDp(3) } | current | An integer that indicates the DSCP remark mode. |
| ME1200MaxSelector | INTEGER { maximumDropProbability(0), maximumFillLevel(1) } | current | An integer that selects between 'Maximum Drop Probability' or 'Maximum Fill Level'. |
| ME1200QceFrameType | INTEGER { any(0), etype(1), llc(2), snap(3), ipv4(4), ipv6(5) } | current | An integer that indicates the QCE frame type key. |
| ME1200QceUserType | INTEGER { admin(0), voiceVlan(1) } | current | An integer that indicates the QCE user type. If the value is zero it indicates a static configuration. If the value is non-zero it indicates a dynamic configuration made by another subsystem. |
| ME1200TagRemarkingMode | INTEGER { classified(0), default(2), mapped(3) } | current | An integer that indicates the tag remarking mode. |
| ME1200VcapKeyType | INTEGER { normal(0), doubleTag(1), ipAddr(2), macIpAddr(3) } | current | Represents a VCAP key type selector. |
| ME1200VlanTagPriority | INTEGER { any(0), value0(1), value1(2), value2(3), value3(4), value4(5), value5(6), value6(7), value7(8), range0to1(9), range2to3(10), range4to5(11), range6to7(12), range0to3(13), range4to7(14) } | current | VLAN priority. |
| ME1200VlanTagType | INTEGER { any(0), untagged(1), tagged(2), cTagged(3), sTagged(4) } | current | Represents a VLAN tag type selector. |