ME1200-RMIRROR-MIB
45 objects
This is a private version of Rmirror
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| ME1200-TC | ME1200InterfaceIndex ME1200Unsigned16 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.120 | Identityme1200RmirrorMib | This is a private version of Rmirror | ||
| 1.3.6.1.4.1.9.9.815.1.120.1 | Nodeme1200RmirrorMibObjects | |||
| 1.3.6.1.4.1.9.9.815.1.120.1.1 | Nodeme1200RmirrorCapabilities | |||
| 1.3.6.1.4.1.9.9.815.1.120.1.1.1 | Scalarme1200RmirrorCapabilitiesReflectorPortSupport | read-only | current | Indicate if reflector port is configurable or not. true(1) means supported. false(2) means not supported. |
| 1.3.6.1.4.1.9.9.815.1.120.1.1.2 | Scalarme1200RmirrorCapabilitiesCpuMirrorSupport | read-only | current | Indicate if mirroring CPU traffic is supported or not. true(1) means supported. false(2) means not supported. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2 | Nodeme1200RmirrorConfig | |||
| 1.3.6.1.4.1.9.9.815.1.120.1.2.1 | Tableme1200RmirrorConfigSessionTable | not-accessible | current | This is a table of global configuration per session |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.1.1 | Rowme1200RmirrorConfigSessionEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.1 | Columnme1200RmirrorConfigSessionSessionId | not-accessible | current | Session ID. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.2 | Columnme1200RmirrorConfigSessionMode | read-write | current | Enable/Disable the mirror or Remote Mirroring function. true(1) is to enable the function. false(2) is to disable it. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.3 | Columnme1200RmirrorConfigSessionSwitchType | read-write | current | Switch type in rmirror. mirror(0) means to do the mirror function on the device. source(1) means the device acts as source node for monitor flow. intermediate(… |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.4 | Columnme1200RmirrorConfigSessionVid | read-write | current | The VLAN ID points out where the monitor packet will copy to. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2 | Tableme1200RmirrorConfigSessionSourceCpuTable | not-accessible | current | This is a table of source CPU configuration per session |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1 | Rowme1200RmirrorConfigSessionSourceCpuEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.1 | Columnme1200RmirrorConfigSessionSourceCpuSessionId | not-accessible | current | Session ID. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.2 | Columnme1200RmirrorConfigSessionSourceCpuSwitchId | not-accessible | current | The identification of switch. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.3 | Columnme1200RmirrorConfigSessionSourceCpuMirrorType | read-write | current | Mirror type on packets to/from CPU. none(0) means no mirror. tx(1) is to monitor the packets sent from CPU. rx(2) is to monitor the packets sent to CPU. both(3… |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.3 | Tableme1200RmirrorConfigSessionSourceVlanTable | not-accessible | current | This is a table of source VLAN configuration per session |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.3.1 | Rowme1200RmirrorConfigSessionSourceVlanEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.3.1.1 | Columnme1200RmirrorConfigSessionSourceVlanSessionId | not-accessible | current | Session ID. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.3.1.2 | Columnme1200RmirrorConfigSessionSourceVlanIfIndex | not-accessible | current | Logical interface number of VLAN. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.3.1.3 | Columnme1200RmirrorConfigSessionSourceVlanMode | read-write | current | Enable/Disable monitor per VLAN. true(1) is to enable the function. false(2) is to disable it. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4 | Tableme1200RmirrorConfigSessionSourcePortTable | not-accessible | current | This is a table of source port configuration per session |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1 | Rowme1200RmirrorConfigSessionSourcePortEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.1 | Columnme1200RmirrorConfigSessionSourcePortSessionId | not-accessible | current | Session ID. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.2 | Columnme1200RmirrorConfigSessionSourcePortIfIndex | not-accessible | current | Logical interface number of physical port. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.3 | Columnme1200RmirrorConfigSessionSourcePortMirrorType | read-write | current | Mirror type on frames to/from port. none(0) means no mirror. tx(1) is to monitor the packets sent from the port. rx(2) is to monitor the packets sent to the po… |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.5 | Tableme1200RmirrorConfigSessionPortTable | not-accessible | current | This is a table of port configuration per session |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.5.1 | Rowme1200RmirrorConfigSessionPortEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.5.1.1 | Columnme1200RmirrorConfigSessionPortSessionId | not-accessible | current | Session ID. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.5.1.2 | Columnme1200RmirrorConfigSessionPortIfIndex | not-accessible | current | Logical interface number of physical port. |
| 1.3.6.1.4.1.9.9.815.1.120.1.2.5.1.3 | Columnme1200RmirrorConfigSessionPortType | read-write | current | Type of port in rmirror function. none(0) means no mirror. intermediate(1) means the port to be a forwarding port. destination(2) means the port to be an end p… |
| 1.3.6.1.4.1.9.9.815.1.120.2 | Nodeme1200RmirrorMibConformance | |||
| 1.3.6.1.4.1.9.9.815.1.120.2.1 | Nodeme1200RmirrorMibCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.120.2.1.1 | Complianceme1200RmirrorMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.120.2.2 | Nodeme1200RmirrorMibGroups | |||
| 1.3.6.1.4.1.9.9.815.1.120.2.2.1 | Groupme1200RmirrorCapabilitiesInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.120.2.2.2 | Groupme1200RmirrorConfigSessionTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.120.2.2.3 | Groupme1200RmirrorConfigSessionSourceCpuTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.120.2.2.4 | Groupme1200RmirrorConfigSessionSourceVlanTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.120.2.2.5 | Groupme1200RmirrorConfigSessionSourcePortTableInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.120.2.2.6 | Groupme1200RmirrorConfigSessionPortTableInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200RmirrorMirrorType | INTEGER { none(0), tx(1), rx(2), both(3) } | current | This enumeration defines the type of mirror traffic. |
| ME1200RmirrorPortType | INTEGER { none(0), intermediate(1), destination(2), reflector(3) } | current | This enumeration defines the type of port. |
| ME1200RmirrorSwitchType | INTEGER { mirror(0), source(1), intermediate(2), destination(3) } | current | This enumeration defines the switch type in rmirror function. |