ME1200-SYNCE-MIB
93 objects
Private SyncE MIB.
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| ME1200-TC | ME1200InterfaceIndex ME1200Unsigned8 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.42 | Identityme1200SynceMib | Private SyncE MIB. | ||
| 1.3.6.1.4.1.9.9.815.1.42.1 | Nodeme1200SynceMibObjects | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.1 | Nodeme1200SynceCapabilities | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.1.1 | Nodeme1200SynceCapabilitiesGlobal | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.1.1.1 | Scalarme1200SynceCapabilitiesGlobalSourceCount | read-only | current | The number of SyncE sources supported by the device. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2 | Nodeme1200SynceConfig | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1 | Nodeme1200SynceConfigGlobal | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1 | Nodeme1200SynceConfigGlobalClockSelectionMode | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.1 | Scalarme1200SynceConfigGlobalClockSelectionModeSelectionMode | read-write | current | The selection mode. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.2 | Scalarme1200SynceConfigGlobalClockSelectionModeSource | read-write | current | Nominated source for manuel selection mode. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.3 | Scalarme1200SynceConfigGlobalClockSelectionModeWtrTime | read-write | current | WTR timer value in minutes. Range is 0 to 12 minutes where 0 means that the timer is disabled. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.4 | Scalarme1200SynceConfigGlobalClockSelectionModeSsmHoldover | read-write | current | Tx overwrite SSM used when clock controller is hold over. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.5 | Scalarme1200SynceConfigGlobalClockSelectionModeSsmFreerun | read-write | current | Tx overwrite SSM used when clock controller is free run. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.6 | Scalarme1200SynceConfigGlobalClockSelectionModeEecOption | read-write | current | Synchronous Ethernet Equipment Clock option. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.2 | Nodeme1200SynceConfigGlobalStationClocks | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.2.1 | Scalarme1200SynceConfigGlobalStationClocksStationClkOut | read-write | current | Station clock output frequency setting. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.1.2.2 | Scalarme1200SynceConfigGlobalStationClocksStationClkIn | read-write | current | Station clock input frequency setting. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2 | Nodeme1200SynceConfigSources | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1 | Tableme1200SynceConfigSourcesClockSourceNominationTable | not-accessible | current | This is the SyncE source nomination configuration. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1 | Rowme1200SynceConfigSourcesClockSourceNominationEntry | not-accessible | current | The sourceId index must be a value from 0 up to the number of sources minus one. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.1 | Columnme1200SynceConfigSourcesClockSourceNominationSourceId | not-accessible | current | - |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.2 | Columnme1200SynceConfigSourcesClockSourceNominationNominated | read-write | current | Indicates if source is nominated. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.3 | Columnme1200SynceConfigSourcesClockSourceNominationNetworkPort | read-write | current | Interface index of the norminated source. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.4 | Columnme1200SynceConfigSourcesClockSourceNominationClkInPort | read-write | current | Clock input of the norminated source. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.5 | Columnme1200SynceConfigSourcesClockSourceNominationPriority | read-write | current | Priority of the nominated source. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.6 | Columnme1200SynceConfigSourcesClockSourceNominationAnegMode | read-write | current | Autonogotiation mode auto-master-slave. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.7 | Columnme1200SynceConfigSourcesClockSourceNominationSsmOverwrite | read-write | current | SSM overwrite quality. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.8 | Columnme1200SynceConfigSourcesClockSourceNominationHoldoffTime | read-write | current | Hold Off timer value in 100ms (3 - 18). Zero means no hold off. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.3 | Nodeme1200SynceConfigPorts | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1 | Tableme1200SynceConfigPortsPortConfigTable | not-accessible | current | This is the SyncE port configuration. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1 | Rowme1200SynceConfigPortsPortConfigEntry | not-accessible | current | The portId index must be a value from 0 up to the number of ports minus one. |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1.1 | Columnme1200SynceConfigPortsPortConfigPortId | not-accessible | current | - |
| 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1.2 | Columnme1200SynceConfigPortsPortConfigSsmEnabled | read-write | current | Quality level via SSM enabled. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3 | Nodeme1200SynceStatus | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.3.1 | Nodeme1200SynceStatusGlobal | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1 | Nodeme1200SynceStatusGlobalClockSelectionMode | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.1 | Scalarme1200SynceStatusGlobalClockSelectionModeClockInput | read-only | current | The clock source locked to when clock selector is in locked state. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.2 | Scalarme1200SynceStatusGlobalClockSelectionModeSelectorState | read-only | current | This is indicating the state of the clock selector. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.3 | Scalarme1200SynceStatusGlobalClockSelectionModeLosx | read-only | current | LOSX |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.4 | Scalarme1200SynceStatusGlobalClockSelectionModeLol | read-only | current | Clock selector has raised the Los Of Lock alarm. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.5 | Scalarme1200SynceStatusGlobalClockSelectionModeDhold | read-only | current | Clock selector has not yet calculated the holdover frequency offset to local oscillator. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2 | Nodeme1200SynceStatusSources | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1 | Tableme1200SynceStatusSourcesClockSourceNominationTable | not-accessible | current | This is the clock source nomination status. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1 | Rowme1200SynceStatusSourcesClockSourceNominationEntry | not-accessible | current | The sourceId index must be a value must be a value from 0 up to the number of sources minus one. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.1 | Columnme1200SynceStatusSourcesClockSourceNominationSourceId | not-accessible | current | - |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.2 | Columnme1200SynceStatusSourcesClockSourceNominationLocs | read-only | current | LOCS |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.3 | Columnme1200SynceStatusSourcesClockSourceNominationFos | read-only | current | FOS |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.4 | Columnme1200SynceStatusSourcesClockSourceNominationSsm | read-only | current | SSM |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.5 | Columnme1200SynceStatusSourcesClockSourceNominationWtr | read-only | current | WTR |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.3 | Nodeme1200SynceStatusPorts | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1 | Tableme1200SynceStatusPortsPortStatusTable | not-accessible | current | This is the port status. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1 | Rowme1200SynceStatusPortsPortStatusEntry | not-accessible | current | The portId index must be a value must be a value from 0 up to the number of ports minus one. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.1 | Columnme1200SynceStatusPortsPortStatusPortId | not-accessible | current | - |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.2 | Columnme1200SynceStatusPortsPortStatusSsmRx | read-only | current | Monitoring of the received SSM QL on this port. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.3 | Columnme1200SynceStatusPortsPortStatusSsmTx | read-only | current | Monitoring of the transmitted SSM QL on this port. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.4 | Columnme1200SynceStatusPortsPortStatusMaster | read-only | current | If PHY is in 1000BaseT Mode then this is monitoring the master/slave mode. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.4 | Nodeme1200SynceStatusPtp | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1 | Tableme1200SynceStatusPtpPortStatusTable | not-accessible | current | This is the PTP port status. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1 | Rowme1200SynceStatusPtpPortStatusEntry | not-accessible | current | The sourceId index must be a value must be a value from 0 up to the number of PTP sources minus one. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.1 | Columnme1200SynceStatusPtpPortStatusSourceId | not-accessible | current | - |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.2 | Columnme1200SynceStatusPtpPortStatusSsmRx | read-only | current | Monitoring of the received SSM QL on this port. |
| 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.3 | Columnme1200SynceStatusPtpPortStatusPtsf | read-only | current | PTSF status for PTP source. |
| 1.3.6.1.4.1.9.9.815.1.42.1.4 | Nodeme1200SynceControl | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.4.1 | Nodeme1200SynceControlSources | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1 | Tableme1200SynceControlSourcesClockSourceTable | not-accessible | current | This is the SyncE sources control structure. |
| 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1 | Rowme1200SynceControlSourcesClockSourceEntry | not-accessible | current | The sourceId index must be a value must be a value from 0 up to the number of sources minus one. |
| 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1.1 | Columnme1200SynceControlSourcesClockSourceSourceId | not-accessible | current | - |
| 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1.2 | Columnme1200SynceControlSourcesClockSourceClearWtr | read-write | current | - |
| 1.3.6.1.4.1.9.9.815.1.42.1.5 | Nodeme1200SynceNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.5.0 | Nodeme1200SynceNotification | |||
| 1.3.6.1.4.1.9.9.815.1.42.1.5.0.1 | Notificationme1200SynceNotificationClockSelectorStateChange | current | Notification is sent when the clock selector state is changed. | |
| 1.3.6.1.4.1.9.9.815.1.42.2 | Nodeme1200SynceMibConformance | |||
| 1.3.6.1.4.1.9.9.815.1.42.2.1 | Nodeme1200SynceMibCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.42.2.1.1 | Complianceme1200SynceMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2 | Nodeme1200SynceMibGroups | |||
| 1.3.6.1.4.1.9.9.815.1.42.2.2.1 | Groupme1200SynceCapabilitiesGlobalInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.2 | Groupme1200SynceConfigGlobalClockSelectionModeInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.3 | Groupme1200SynceConfigGlobalStationClocksInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.4 | Groupme1200SynceConfigSourcesClockSourceNominationInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.5 | Groupme1200SynceConfigPortsPortConfigInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.6 | Groupme1200SynceStatusGlobalClockSelectionModeInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.7 | Groupme1200SynceStatusSourcesClockSourceNominationInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.8 | Groupme1200SynceStatusPortsPortStatusInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.9 | Groupme1200SynceStatusPtpPortStatusInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.10 | Groupme1200SynceControlSourcesClockSourceInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.42.2.2.11 | Groupme1200SynceNotificationInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200synceAnegMode | INTEGER { none(0), preferedSlave(1), preferedMaster(2), forcedSlave(3) } | current | - |
| ME1200synceEecOption | INTEGER { eecOption1(0), eecOption2(1) } | current | - |
| ME1200synceFrequency | INTEGER { disabled(0), freq1544kHz(1), freq2048kHz(2), freq10MHz(3), freqMax(4) } | current | - |
| ME1200syncePtsfState | INTEGER { none(0), unusable(1), lossSync(2), lossAnnounce(3) } | current | - |
| ME1200synceQualityLevel | INTEGER { qlNone(0), qlPrc(1), qlSsua(2), qlSsub(3), qlEec2(4), qlEec1(5), qlDnu(6), qlInv(7), qlFail(8), qlLink(9) } | current | - |
| ME1200synceSelectionMode | INTEGER { manual(0), manualToSelected(1), autoNonrevertive(2), autoRevertive(3), forcedHoldover(4), forcedFreeRun(5) } | current | - |
| ME1200synceSelectorState | INTEGER { locked(0), holdover(1), freerun(2), ptp(3), refFailed(4), acquiring(5) } | current | - |