ME1200-SYSUTIL-MIB
72 objects
This is a private version of SysUtil
Imported Objects
| CISCOME1200-MIB | me1200SwitchMgmt |
| ME1200-TC | ME1200DisplayString ME1200Unsigned8 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.24 | Identityme1200SysutilMib | This is a private version of SysUtil | ||
| 1.3.6.1.4.1.9.9.815.1.24.1 | Nodeme1200SysutilMibObjects | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.1 | Nodeme1200SysutilCapabilities | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.1.1 | Scalarme1200SysutilCapabilitiesWarmRebootSupported | read-only | current | Indicate if warm restart is supported or not. true(1) means it is supported. false(2) means it is not supported. |
| 1.3.6.1.4.1.9.9.815.1.24.1.1.2 | Scalarme1200SysutilCapabilitiesPostSupported | read-only | current | Indicate if POST(Power On Self Test) is supported or not. true(1) means it is supported. false(2) means it is not supported. |
| 1.3.6.1.4.1.9.9.815.1.24.1.1.3 | Scalarme1200SysutilCapabilitiesZtpSupported | read-only | current | Indicate if ZTP(Zero Touch Provisioning) is supported or not. true(1) means it is supported. false(2) means it is not supported. |
| 1.3.6.1.4.1.9.9.815.1.24.1.1.4 | Scalarme1200SysutilCapabilitiesStackFwChkSupported | read-only | current | Indicate if stack firmware version check is supported or not. true(1) means it is supported. false(2) means it is not supported. |
| 1.3.6.1.4.1.9.9.815.1.24.1.2 | Nodeme1200SysutilConfig | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.2.1 | Nodeme1200SysutilConfigSystemMemoryPool | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.2.1.1 | Scalarme1200SysutilConfigSystemMemoryPoolNotifThreshold | read-write | current | The threshold value in percentage of free memory remaining in a memory pool.A SNMP notification is sent when the free memory available goes below this threshol… |
| 1.3.6.1.4.1.9.9.815.1.24.1.2.2 | Nodeme1200SysutilConfigSystemCpuLoad | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.2.2.1 | Scalarme1200SysutilConfigSystemCpuLoadMonitoringMode | read-write | current | The mode of system CPU load monitoring. If the mode is enabled, a SNMP notification is sent when the CPU load is over the average value in one minute, five min… |
| 1.3.6.1.4.1.9.9.815.1.24.1.2.2.2 | Scalarme1200SysutilConfigSystemCpuLoadMonitoringInterval | read-write | current | The interval value in senconds of CPU load monitoring. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3 | Nodeme1200SysutilStatus | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.3.1 | Nodeme1200SysutilStatusCpuLoad | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.3.1.1 | Scalarme1200SysutilStatusCpuLoadAverage100msec | read-only | current | Average CPU load (%) in 100 milli-seconds. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.1.2 | Scalarme1200SysutilStatusCpuLoadAverage1sec | read-only | current | Average CPU load (%) in 1 second. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.1.3 | Scalarme1200SysutilStatusCpuLoadAverage10sec | read-only | current | Average CPU load (%) in 10 seconds. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.1.4 | Scalarme1200SysutilStatusCpuLoadAverage1min | read-only | current | Average CPU load (%) in 1 minute. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.1.5 | Scalarme1200SysutilStatusCpuLoadAverage5min | read-only | current | Average CPU load (%) in 5 minutes. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.1.6 | Scalarme1200SysutilStatusCpuLoadAverage15min | read-only | current | Average CPU load (%) in 15 minutes. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.2 | Tableme1200SysutilStatusPowerSupplyTable | not-accessible | current | Table of power supply status. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.2.1 | Rowme1200SysutilStatusPowerSupplyEntry | not-accessible | current | Each row contains the power supply status. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.1 | Columnme1200SysutilStatusPowerSupplySwitchId | not-accessible | current | The identification of switch. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.2 | Columnme1200SysutilStatusPowerSupplyPsuId | not-accessible | current | The identification of power supply. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.3 | Columnme1200SysutilStatusPowerSupplyState | read-only | current | The state of power supply. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.4 | Columnme1200SysutilStatusPowerSupplyDescription | read-only | current | The description of power supply. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.5 | Columnme1200SysutilVoltageStatus | read-only | current | Status of differnt system voltages. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.3 | Tableme1200SysutilStatusSystemLedTable | not-accessible | current | Table of system LED status. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.3.1 | Rowme1200SysutilStatusSystemLedEntry | not-accessible | current | Each row contains the system LED status. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.3.1.1 | Columnme1200SysutilStatusSystemLedSwitchId | not-accessible | current | The identification of switch. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.3.1.2 | Columnme1200SysutilStatusSystemLedDescription | read-only | current | The description of system LED status. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.4 | Nodeme1200SysutilStatusSystemMemoryPool | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.3.4.1 | Scalarme1200SysutilStatusSystemMemoryPoolValid | read-only | current | The total memory size in kilobytes that is valid for the system. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.4.2 | Scalarme1200SysutilStatusSystemMemoryPoolUsed | read-only | current | The memory size in kilobytes that is currently in use by the applications. |
| 1.3.6.1.4.1.9.9.815.1.24.1.3.4.3 | Scalarme1200SysutilStatusSystemMemoryPoolFree | read-only | current | The memory size in kilobytes that is currently unsed by the applications. |
| 1.3.6.1.4.1.9.9.815.1.24.1.4 | Nodeme1200SysutilControl | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.4.1 | Tableme1200SysutilControlRebootTable | not-accessible | current | This is a table to reboot a swicth |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.1.1 | Rowme1200SysutilControlRebootEntry | not-accessible | current | Each switch has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.1.1.1 | Columnme1200SysutilControlRebootSwitchId | not-accessible | current | The identification of switch. |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.1.1.2 | Columnme1200SysutilControlRebootType | read-write | current | Type of reboot. noReboot(0) does not reboot. coldReboot(1) is to do cold reboot. warmReboot(2) is to do warm reboot, but this is optional. The OID of vtssSysut… |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.2 | Tableme1200SysutilControlSystemLedTable | not-accessible | current | This is a table to clear the system LED error status |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1 | Rowme1200SysutilControlSystemLedEntry | not-accessible | current | Each switch has a set of parameters |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.1 | Columnme1200SysutilControlSystemLedSwitchId | not-accessible | current | The identification of switch. |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.2 | Columnme1200SysutilControlSystemLedClearStatus | read-write | current | Type of system LED status clearing.all(0) is used to clear all error status of the system LED and back to normal indication. fatal(1) is used to clear fatal er… |
| 1.3.6.1.4.1.9.9.815.1.24.1.5 | Nodeme1200SysutilNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0 | Nodeme1200SysutilNotification | |||
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.1 | Notificationme1200SysutilNotificationPowerSupplyStateChange | current | Notification is sent if a power supply change state. | |
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.2 | Notificationme1200SysutilNotificationReboot | current | Notification is sent when the device is rebooted by the user interface demand from CLI, Web or SNMP. | |
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.3 | Notificationme1200SysutilNotificationMemoryPoolLowMemory | current | Notification is sent when the free memory available goes below the value of system memory pool notification threshold. | |
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.4 | Notificationme1200SysutilNotificationMemoryPoolLowMemoryRecovery | current | Notification is sent when the free memory available recovery above the value of system memory pool notification threshold after the low memory event occurred. | |
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.5 | Notificationme1200SysutilNotificationCpuLoadOverAverage1min | current | Notification is sent when the CPU load is over the average value in one minute. | |
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.6 | Notificationme1200SysutilNotificationCpuLoadOverAverage5min | current | Notification is sent when the CPU load is over the average value in five minutes. | |
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.7 | Notificationme1200SysutilNotificationCpuLoadOverAverage15min | current | Notification is sent when the CPU load is over the average value in fifteen minutes. | |
| 1.3.6.1.4.1.9.9.815.1.24.1.5.0.8 | Notificationme1200SysutilNotificationVoltageFailure | current | Notification is sent when different system voltages are out of range. | |
| 1.3.6.1.4.1.9.9.815.1.24.2 | Nodeme1200SysutilMibConformance | |||
| 1.3.6.1.4.1.9.9.815.1.24.2.1 | Nodeme1200SysutilMibCompliances | |||
| 1.3.6.1.4.1.9.9.815.1.24.2.1.1 | Complianceme1200SysutilMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2 | Nodeme1200SysutilMibGroups | |||
| 1.3.6.1.4.1.9.9.815.1.24.2.2.1 | Groupme1200SysutilCapabilitiesInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.2 | Groupme1200SysutilConfigSystemMemoryPoolInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.3 | Groupme1200SysutilConfigSystemCpuLoadInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.4 | Groupme1200SysutilStatusCpuLoadInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.5 | Groupme1200SysutilStatusPowerSupplyInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.6 | Groupme1200SysutilStatusSystemLedInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.7 | Groupme1200SysutilStatusSystemMemoryPoolInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.8 | Groupme1200SysutilControlRebootInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.9 | Groupme1200SysutilControlSystemLedInfoGroup | current | A collection of objects suitable for bulk operations. | |
| 1.3.6.1.4.1.9.9.815.1.24.2.2.10 | Groupme1200SysutilNotificationInfoGroup | current | A collection of objects suitable for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ME1200SysutilPowerSupplyStateType | INTEGER { active(0), standby(1), notPresent(2) } | current | This enumeration defines the type of power supply state. |
| ME1200SysutilRebootType | INTEGER { noReboot(0), coldReboot(1), warmReboot(2) } | current | This enumeration defines the type of reboot. |
| ME1200SysutilSystemLedClearType | INTEGER { all(0), fatal(1), software(2), post(3), ztp(4), stackFwChk(5) } | current | This enumeration defines the type of system LED status clearing. |