MEF-R-MIB
142 objects
MEF MIB.
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| RAD-SMI-MIB | radExperimental |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowPointer RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.20.8 | IdentitymefMIBR | MEF MIB. | ||
| 1.3.6.1.4.1.164.20.8.1 | NodemefObjects | |||
| 1.3.6.1.4.1.164.20.8.1.1 | NodemefrScalarObjects | |||
| 1.3.6.1.4.1.164.20.8.1.1.1 | ScalarmefrBwRoundUp | read-write | current | This object designates whether the device services bandwidth are rounded up or down. true: Set the CIR & EIR to the closest higher granular value. false: Set t… |
| 1.3.6.1.4.1.164.20.8.1.1.2 | ScalarmefrEnvelopeRanks | read-write | current | The maximum number of ranks (CoS) that are allocated for an envelope policer. |
| 1.3.6.1.4.1.164.20.8.1.1.3 | ScalarhsQBlockMapping | read-write | current | Slot supporting high scale queue blocks in ETX-220. |
| 1.3.6.1.4.1.164.20.8.1.3 | NodebwProfileObjects | |||
| 1.3.6.1.4.1.164.20.8.1.3.1 | TablebwProfileTable | not-accessible | current | This table defines the MEF BW profile attributes. The profile can be defined either directly to an entity i.e. UNI or EVC or per EVC.CoS as follows: UNI When t… |
| 1.3.6.1.4.1.164.20.8.1.3.1.1 | RowbwProfileEntry | not-accessible | current | A conceptual row where each row contains one BW profile attributes. |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.1 | ColumnbwProfileID | not-accessible | current | This attribute defines the BW Profile ID. The BW profile ID must be greater than '0'. |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.2 | ColumnbwProfileIndex | not-accessible | current | This attribute defines the BW Profile index. The BW profile index is a 'running index' denoting more than one profile e.g. High & Low, specified for this BW pr… |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.3 | ColumnbwProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.4 | ColumnbwProfileCIR | read-create | current | This attribute defines the Committed Information Rate (CIR) BW. CIR is the average rate up to which packets are marked Green. |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.5 | ColumnbwProfileCBS | read-create | current | This attribute defines the Committed Burst Size (CBS) for the CoS. CBS is the maximum number of bytes allowed for incoming packets to burst above CIR, but stil… |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.8 | ColumnbwProfileEIR | read-create | current | This attribute defines the Excessive Information Rate (EIR) BW. The EIR is greater or equal to CIR. Packets that exceed the CIR but are below the EIR are marke… |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.9 | ColumnbwProfileEBS | read-create | current | This attribute defines the Excessive Burst Size (EBS) for the CoS. EBS is the maximum number of bytes allowed for incoming packets to burst above EIR, but stil… |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.12 | ColumnbwProfileColorAware | read-create | current | This attribute defines whether the policing function assumes ingress frames are already colored and must be treated, or not. This attribute implements the MEF'… |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.13 | ColumnbwProfileColorAwareAdmissionOption | read-create | current | This attribute defines the admission options for Yellow Colored Frames. A service may be defined to admit more yellow frames into the network when the volume o… |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.14 | ColumnbwProfileName | read-create | current | This attribute defines the name assigned to BW profile. |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.15 | ColumnbwProfileGranularity | read-create | current | This attribute defines BW profile Granularity. |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.16 | ColumnbwProfilePolicedTraffic | read-create | current | This attribute defines the policed traffic type. |
| 1.3.6.1.4.1.164.20.8.1.3.1.1.17 | ColumnbwProfileCompensation | read-create | current | This attribute defines the layer1 overhead (preamble and IFG) and the overhead for the added VLAN header in case of stacking. The compensation enable the polic… |
| 1.3.6.1.4.1.164.20.8.1.3.2 | TableenvelopeBwProfileTable | not-accessible | current | This table contains envelope bandwidth profiles as defined in MEF 10.3 section 12. |
| 1.3.6.1.4.1.164.20.8.1.3.2.1 | RowenvelopeBwProfileEntry | not-accessible | current | An entry in envelope BW profile table. A row cannot be deleted if the profile is associated to a flow. When a row is deleted all the corresponding rows in the … |
| 1.3.6.1.4.1.164.20.8.1.3.2.1.1 | ColumnenvelopeBwProfileIndex | not-accessible | current | A unique number as profile identifier. |
| 1.3.6.1.4.1.164.20.8.1.3.2.1.2 | ColumnenvelopeBwProfileName | read-create | current | A meaningful printable profile name. |
| 1.3.6.1.4.1.164.20.8.1.3.2.1.3 | ColumnenvelopeBwProfileRowStatus | read-create | current | This object enables creation and deletion of profiles. |
| 1.3.6.1.4.1.164.20.8.1.3.2.1.4 | ColumnenvelopeBwProfileCouplingFlagPolicy | read-create | current | Overall policy for the coupling flags. When set to sharingExcessBw(2) or to uncoupledBwSharing(3) the object envelopeBwProfileCouplingFlag0 is ignored and the … |
| 1.3.6.1.4.1.164.20.8.1.3.2.1.5 | ColumnenvelopeBwProfileCouplingFlag0 | read-create | current | This parameter determines whether or not overflow tokens not used for service frames declared Green can be used as Yellow tokens. When set to 1 - Green tokens … |
| 1.3.6.1.4.1.164.20.8.1.3.2.1.6 | ColumnenvelopeBwProfileColorMode | read-create | current | The color mode that is used for the service. |
| 1.3.6.1.4.1.164.20.8.1.3.2.1.7 | ColumnenvelopeBwProfileCompensation | read-create | current | This attribute allows to take into consideration the overhead added to transmitted frames e.g preamble, IFG, VLAN stacking. The compensation enables the police… |
| 1.3.6.1.4.1.164.20.8.1.3.3 | TableenvelopeBwProfileCosTable | not-accessible | current | This table contains envelope bandwidth profiles, at the CoS level. |
| 1.3.6.1.4.1.164.20.8.1.3.3.1 | RowenvelopeBwProfileCosEntry | not-accessible | current | An entry in envelope BW profile CoS table. When a row is created, the envelopeBwProfileIndex must point to an already existing row of envelopeBwProfileTable. A… |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.1 | ColumnenvelopeBwProfileCosIndex | not-accessible | current | The CoS to which the configuration in this table applies. |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.2 | ColumnenvelopeBwProfileCosRowStatus | read-create | current | This object enables creation and deletion of CoS profiles. |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.3 | ColumnenvelopeBwProfileCosCir | read-create | current | This attribute defines the average rate of service frames that are declared Green by the BW profile. |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.4 | ColumnenvelopeBwProfileCosCirMax | read-create | current | This attribute limits the rate of tokens added to the committed token bucket (Green bucket). The value of this object must be equal or greater than envelopeBwP… |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.5 | ColumnenvelopeBwProfileCosCbs | read-create | current | This attribute defines the maximum number of bytes available for a burst of service frames sent at the UNI line rate that are declared Green by the BW profile. |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.6 | ColumnenvelopeBwProfileCosEir | read-create | current | This attribute defines the average rate of service frames that are declared Yellow by the BW profile. |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.7 | ColumnenvelopeBwProfileCosEirMax | read-create | current | This attribute limits the rate of tokens added to the excess token bucket (Yellow bucket). The value of this object must be equal or greater than envelopeBwPro… |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.8 | ColumnenvelopeBwProfileCosEbs | read-create | current | This attribute defines the maximum number of bytes available for a burst of service frames sent at the UNI line rate that are declared Yellow by the BW profile. |
| 1.3.6.1.4.1.164.20.8.1.3.3.1.9 | ColumnenvelopeBwProfileCoSCouplingFlag | read-create | current | This parameter determines whether or not overflow tokens not used for service frames declared Green can be used as Yellow tokens. When set to 1 - unconsumed to… |
| 1.3.6.1.4.1.164.20.8.1.4 | NodecPObjects | |||
| 1.3.6.1.4.1.164.20.8.1.4.1 | TablecPProfileTable | not-accessible | current | This table defines the MEF CP attributes and behavior. It defines whether a specific Control Protocol MAC address must be discarded, peered (i.e. processed) or… |
| 1.3.6.1.4.1.164.20.8.1.4.1.1 | RowcPProfileEntry | not-accessible | current | A conceptual row where each row contains one CP attributes. |
| 1.3.6.1.4.1.164.20.8.1.4.1.1.1 | ColumncPProfileIndex | not-accessible | current | Defines the CP Profile ID. |
| 1.3.6.1.4.1.164.20.8.1.4.1.1.2 | ColumncPProfileRunningIndex | not-accessible | current | This attribute defines a running index for each CP MAC address. From value 0x4000001 (except 0x7FFFFFFF which indicates a default entry in the CP Profile)this … |
| 1.3.6.1.4.1.164.20.8.1.4.1.1.3 | ColumncPProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.20.8.1.4.1.1.4 | ColumncPProfileMacAddress | read-create | current | This attribute defines the CP MAC address. When cPProfileMacProcessing equals to macChangeTunnel(5), this attribute defines the MAC address that replaces the M… |
| 1.3.6.1.4.1.164.20.8.1.4.1.1.5 | ColumncPProfileMacProcessing | read-create | current | This attribute defines the CP MAC address processing: ignore Ignore the MAC address since this MAC address will be processed by another 'rule' specified by e.g… |
| 1.3.6.1.4.1.164.20.8.1.4.1.1.6 | ColumncPProfileName | read-create | current | The name of the CP Profile. |
| 1.3.6.1.4.1.164.20.8.1.4.1.1.7 | ColumncPProfileProtocol | read-create | current | This attribute defines the Layer 2 protocol data units (PDUs) that are tunneled through a network.Values that are different than none(1) are relevant only for … |
| 1.3.6.1.4.1.164.20.8.1.4.2 | Tablel2cpStatTable | not-accessible | current | This table shows L2CP statistics .Some protocols can be distinguished by MAC,and some need parsing of other fields in addition to the MAC, when more than one p… |
| 1.3.6.1.4.1.164.20.8.1.4.2.1 | Rowl2cpStatEntry | not-accessible | current | An entry in the L2CP Statistics Table. |
| 1.3.6.1.4.1.164.20.8.1.4.2.1.1 | Columnl2cpStatPortIndex | not-accessible | current | This object is an index of the specific port or interface. For an interface, ifIndex will be used. |
| 1.3.6.1.4.1.164.20.8.1.4.2.1.2 | Columnl2cpStatProtocol | not-accessible | current | This object defines the Layer 2 protocol that is monitored . none(1) means Not Applicable . all(3) means total count of all the protocols that are transferred … |
| 1.3.6.1.4.1.164.20.8.1.4.2.1.3 | Columnl2cpStatMacAddress | not-accessible | current | This object defines the MAC Address of the protocol that is monitored. The address 00:00:00:00:00:00 means Not Applicable. |
| 1.3.6.1.4.1.164.20.8.1.4.2.1.4 | Columnl2cpStatEncapsulatedFrames | read-only | current | This attribute displays the counted encapsulated Frames, before transferred via the provider's edge. |
| 1.3.6.1.4.1.164.20.8.1.4.2.1.5 | Columnl2cpStatDecapsulatedFrames | read-only | current | This attribute displays the counted decapsulated Frames. These frames are retrieved to the original MAC after being encapsulated at the other customer side the… |
| 1.3.6.1.4.1.164.20.8.1.5 | NodeuniObjects | |||
| 1.3.6.1.4.1.164.20.8.1.5.1 | TableuniTable | not-accessible | current | This table defines the MEF UNI attributes. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1 | RowuniEntry | not-accessible | current | A conceptual row where each row contains one UNI interface's attributes. Each row binds an Interface to a UNI. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.1 | ColumnuniRunningIndex | not-accessible | current | This attribute defines a running (UNI) index at the xNNI level. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.2 | ColumnuniRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.12 | ColumnuniLayer2CPProcessingProfile | read-create | current | This attribute defines the Layer 2 Control Protocol Processing profile assigned to this UNI. If set to '0', no profile is assigned to this UNI. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.13 | ColumnuniPerUniBWprofile | read-create | current | This attribute defines the BW profile assigned to this UNI. If set to '0', no profile is assigned to this UNI. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.22 | ColumnuniSpTagProtocolIdentifier | read-create | current | Determines the Tag Protocol Identifier. Values: 8100 C-TAG 88a8 S-TAG. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.23 | ColumnuniPacketColoring | read-create | current | |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.27 | ColumnuniPerUniEgressAction | read-create | current | This attribute defines the action that should be taken at the Egress side of this UNI. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.33 | ColumnuniQueueGroupName | read-create | current | This attribute points to a queueGroupName of queueGroupTable. |
| 1.3.6.1.4.1.164.20.8.1.5.1.1.36 | ColumnuniClassifierKey | read-create | current | This bit map defines port classifier capabilities. |
| 1.3.6.1.4.1.164.20.8.1.6 | NodeevcObjects | |||
| 1.3.6.1.4.1.164.20.8.1.6.3 | TableflowTable | not-accessible | current | This table defines the MEF Flow attributes. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1 | RowflowEntry | not-accessible | current | A conceptual row where each row contains one flow attributes. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.1 | ColumnflowIdx1 | not-accessible | current | This attribute defines a unique Flow. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.2 | ColumnflowIdx2 | not-accessible | current | This attribute defines the type of the Bidirectional flow 1 - not in use (default - base flow) 201 - reverse flow 301 - via-1 flow 302 - via-2 flow 401 - Mirro… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.3 | ColumnflowName | read-create | current | This attribute defines a unique name assigned to the flow. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.4 | ColumnflowRowStatus | read-create | current | This attribute is used to create/delete rows of the table. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.5 | ColumnflowBWprofile | read-create | current | This attribute defines the BW profile(s) assigned to this flow. If set to '0', no profile is assigned to this flow. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.6 | ColumnflowFixedCos | read-create | current | This attribute defines the queue mapping that will be assigned to the flow in case it does not use the Marking profile assigned to the Uni. A value of 255 mean… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.7 | ColumnflowCOSProfile | read-create | current | This attribute defines the CoS profile assigned to this flow. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.8 | ColumnflowQBlock | read-create | current | This attribute defines the QBlock assigned to this flow. It can also be used as a pointer to a row of qProfileTable. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.9 | ColumnflowMappingProfile | read-create | current | This attribute defines the Mapping profile assigned to this flow. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.10 | ColumnflowFixedMarking | read-create | current | This attribute defines the Marking value (0..63) that will be assigned to the flow in case it does not use the Marking profile.It is used only when add/push ac… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.11 | ColumnflowMarkingProfile | read-create | current | This attribute defines the Marking profile assigned to this flow. It is used only when add/push action is performed. In case of 'Copy',the value will be 2^32-1. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.12 | ColumnflowOuterVlanTagging | read-create | current | This attribute determines the behavior of the flow regarding it's Outer VLAN (the first after MAC Address): add - add VLAN to the frame at the Egress preserve … |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.13 | ColumnflowOuterVlan | read-create | current | This attribute defines the VLAN ID that is assigned in case that flowOuterVlanTagging value is add(1). |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.14 | ColumnflowInnerVlanTagging | read-create | current | This attribute determines the behavior of the flow regarding it's Inner VLAN (the second after MAC Address): add - add VLAN to the frame at the Egress preserve… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.15 | ColumnflowInnerVlan | read-create | current | This attribute defines the VLAN ID that is assigned to the frame in case that flowInnerVlanTagging value is add(1). |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.16 | ColumnflowEgressPort | read-create | current | This attribute defines the egress port that is assigned to this flow. This value can represent also the slot/port in relevant devices. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.17 | ColumnflowIngressPort | read-create | current | This attribute defines the ingress port that is assigned to this flow. This value can represent also the slot/port in relevant devices. For a port-classifier f… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.18 | ColumnflowInnerFixedMarking | read-create | current | This attribute defines the Inner Marking value (0..63) that will be assigned to the flow in case it does not use the Marking profile.It is used only when add/p… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.19 | ColumnflowInnerMarkingProfile | read-create | current | This attribute defines the Inner Marking profile assigned to this flow. It is used only when add/push action is performed. In case of 'Copy',the value will be … |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.20 | ColumnflowDropAction | read-create | current | This attribute defines whether All the frames classified to this flow will be dropped. enable(3)=Drop Action. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.21 | ColumnflowPriority | read-create | current | This attribute defines the priority of the flow in case that more than one flow is associated with same specific Ingress Port. 0-Lowest priority. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.22 | ColumnflowMarkOuterFixedMarking | read-create | current | This attribute defines the outer Marking value (0..63) that will be assigned to the flow in case it does not use the Marking profile.It is used only when mark=… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.23 | ColumnflowMarkOuterMarkingProfile | read-create | current | This attribute defines the outer Marking profile assigned to this flow. It is used only when mark=swap action is performed. In case of 'Copy',the value will be… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.24 | ColumnflowMarkInnerFixedMarking | read-create | current | This attribute defines the Inner Marking value (0..63) that will be assigned to the flow in case it does not use the Inner Marking profile.It is used only when… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.25 | ColumnflowMarkInnerMarkingProfile | read-create | current | This attribute defines the Inner Marking profile assigned to this flow. It is used only when mark=swap action is performed. In case of 'Copy',the value will be… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.26 | ColumnflowMarkOuterVlanTagging | read-create | current | This attribute determines the marking action of the flow regarding its Outer VLAN (the first after MAC Address). |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.27 | ColumnflowMarkOuterVlan | read-create | current | This attribute defines the VLAN ID that is assigned in case that flowMarkOuterVlanTagging value is overwriteVlan(1). |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.28 | ColumnflowMarkInnerVlanTagging | read-create | current | This attribute determines the marking action of the flow regarding it's Inner VLAN (the second after MAC Address). |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.29 | ColumnflowMarkInnerVlan | read-create | current | This attribute defines the VLAN ID that is assigned in case that flowMarkInnerVlanTagging value is overwriteVlan(1). |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.30 | ColumnflowPolicerAggregate | read-create | current | This parameter defines the group of the Policer Aggregate (agnGroupIdx from agnGroupTable when agnGroupCnfgIdx=2 and agnGroupComponentIdx=0xFFFF ). The value 0… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.32 | ColumnflowMarkMacTagging | read-create | current | This attribute determines the behavior (marking action)of the flow regarding its MAC Address. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.33 | ColumnflowMarkIpTagging | read-create | current | This attribute determines the behavior (marking action)of flow regarding its IP Address. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.38 | ColumnflowLayer2CPProcessingProfile | read-create | current | This attribute defines the L2CP Processing profile assigned to this flow. If set to '0', no profile is assigned. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.39 | ColumnflowIngressColorMapping | read-create | current | This attribute defines the flow ingress color mapping: 'green' and 'yellow' defines color directly 'colorProfile' defines color profile according to the . |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.40 | ColumnflowIngressColorProfile | read-create | current | This attribute defines the ingress color profile assigned to this flow. If set to '0', no profile is assigned. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.41 | ColumnflowCosMapping | read-create | current | This attribute defines flow CoS mapping. The value 0..7 indicates fixed CoS selection. The value 255 defines using of flowCosMappingProfile OBJECT belonging to… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.42 | ColumnflowCosMappingProfile | read-create | current | This attribute defines CoS mapping profile assigned to this flow. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.47 | ColumnflowStatus | read-only | current | This object displays the flow status. Bit 0 = '1' denotes that operational state of the flow is OK. This bit duplicates the flow ifOperStatus. It allows to get… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.49 | ColumnflowServiceIdName | read-create | current | This attribute defines the Service ID name of this flow, if the flow is not associated with a Service the value is null. Upon setting a value, the agent create… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.51 | ColumnflowPolicerType | read-create | current | This attribute defines the type of the policer (i.e. BW profile type) that is attached to the flow. regular(2) - the BW profile is indicated by flowBWprofile t… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.52 | ColumnflowMultiCosCounters | read-create | current | This attribute defines a list of CoS values to which flow counters are allocated. This object is relevant only when flowPolicerType is set to none(1). |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.53 | ColumnflowClassifierType | read-create | current | This attribute defines the type of the classifier used. |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.54 | ColumnflowIngressPortClassifier | read-only | current | This attribute indicates the ingress port that is indirectly assigned to this flow (via a corresponding rule in a port classifier). When the ingress port is no… |
| 1.3.6.1.4.1.164.20.8.1.6.3.1.55 | ColumnflowDscpMarkingProfile | read-create | current | This attribute defines the DSCP marking profile assigned to this flow. |
| 1.3.6.1.4.1.164.20.8.1.6.4 | NodeflowMapping | |||
| 1.3.6.1.4.1.164.20.8.1.6.4.2 | TableserviceIdTable | not-accessible | current | This table map flows to a service (EVC). Rows in this table are created by agent when: flowServiceId is set, or erpVlanServiceIdName is set, or for each entry … |
| 1.3.6.1.4.1.164.20.8.1.6.4.2.1 | RowserviceIdEntry | not-accessible | current | Entry in the serviceIdTable. |
| 1.3.6.1.4.1.164.20.8.1.6.4.2.1.1 | ColumnserviceIdName | not-accessible | current | This attribute defines a unique service identification. |
| 1.3.6.1.4.1.164.20.8.1.6.4.2.1.2 | ColumnserviceIdRowPointer | not-accessible | current | This attribute holds the OID of the entity that associate. with the Service. For the flowTable the serviceIdRowPointer shall point to agnStringToIndexTable. |
| 1.3.6.1.4.1.164.20.8.1.6.4.2.1.3 | ColumnserviceIdEntityType | read-only | current | This attribute specify the type of the entity in a service. |
| 1.3.6.1.4.1.164.20.8.1.6.4.2.1.5 | ColumnserviceIdRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.20.8.1.6.4.3 | TableserviceIdCmdTable | not-accessible | current | This table display the configuration parameters of the Service automatic command. for each entry in this table the agent shall create an entry in serviceIdTabl… |
| 1.3.6.1.4.1.164.20.8.1.6.4.3.1 | RowserviceIdCmdEntry | not-accessible | current | Entry in the serviceIdCfmTable. |
| 1.3.6.1.4.1.164.20.8.1.6.4.3.1.1 | ColumnserviceIdCmdRowStatus | read-create | current | This RowStatus is used to create a row in the table possible value of the RowStatus are active(1), createAndGo(4). |
| 1.3.6.1.4.1.164.20.8.1.6.4.3.1.2 | ColumnserviceIdCmdVlan | read-create | current | This attribute represent the (outer) VLAN of the Service. |
| 1.3.6.1.4.1.164.20.8.1.6.4.3.1.3 | ColumnserviceIdCmdInnerVlan | read-create | current | This attribute represent the (inner) VLAN of the Service. |
| 1.3.6.1.4.1.164.20.8.1.6.4.3.1.4 | ColumnserviceIdCmdPortIdx | read-create | current | This attribute represent the port (ifIndex) of the Service. |
| 1.3.6.1.4.1.164.20.8.1.6.6 | TablepmFlowCmdTable | not-accessible | current | Table that holds a set of scalars as columns. |
| 1.3.6.1.4.1.164.20.8.1.6.6.1 | RowpmFlowCmdEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.20.8.1.6.6.1.1 | ColumnpmFlowCmdIndex | not-accessible | current | This object used as index value=1. |
| 1.3.6.1.4.1.164.20.8.1.6.6.1.2 | ColumnpmFlowCmdWithOAMTraffic | read-write | current | This command is related to flow counters behavior. the action will be at the device level for all flows measurements to include or exclude the OAM traffic from… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TCBurstSizeV2 | Unsigned32 | current | The number of octets that the stream may send back-to-back. |
| TCEthFrameHandling | INTEGER { untagged(1), noChange(2), changeVlan(3), addVlan(4), removeVlan(5), rangeVlan(6) } | current | The Ethernet frame handling options in ingress and egress. |
| TCEvcId | Unsigned32 (1..4095) | current | This TC defines the EVC identifier. |
| TCSLAPrioritySource | INTEGER { defUserPrio (1), ieee802dot1p (2), tos (3), diffServ (4), ieee802dot1q (5), copy (6), userMarkingTable (7), spVlanId (8), spVlanIdAndPBit (9) } | current | This TC defines how frame priority should be determined. - defUserPrio: denotes a user priority. This is a fixed priority that is applied to all frames. - ieee802dot1p: denotes the use of the priority bits as defined by… |
| TCV2DefaultUserPriority | Unsigned32 (0..63) | current | The default priority set by the user. |
| TCVlanId | Unsigned32 (0..4095) | current | A 12-bit VLAN ID used in the VLAN Tag header. |
| TCVTIdV2 | Unsigned32 | current | This object points to the BW Profile. |