MEF-UNI-EVC-MIB
160 objects
This MIB module contains the management objects for the management of User Network Interfaces (UNIs) and Ethernet Virtual Connections (EVCs) Copyright 2013 Metro Ethernet Forum All rights reserved. **************************************************************************** Reference Overview A number of base documents have been used to create this MIB. The following are the abbreviations for the baseline documents: [MEF6.1] refers to MEF 6.1 'Ethernet Services Definitions - Phase 2', April 2008 [MEF 6.1.1] refers to MEF 6.1.1 'Layer 2 Control Protocol Handling Amendment to MEF 6.1', January 2012 [MEF 7.2] refers to MEF 7.2 'Carrier Ethernet Management Information Model', January 2013 [MEF 10.2] refers to MEF 10.2 'Ethernet Services Attributes Phase 2', October 2009 [MEF 26.1] refers to MEF 26.1 'External Network Network Interface (ENNI) - Phase 2', January 2012 [Q.840.1] refers to 'ITU-T Requirements and analysis for NMS-EMS management interface of Ethernet over Transport and Metro Ethernet Network (EoT/MEN)', March 2007 ****************************************************************************
Imported Objects
| ENTITY-STATE-TC-MIB | EntityAdminState EntityOperState |
| IEEE8021-TC-MIB | IEEE8021PriorityValue |
| IF-MIB | -- RFC 2580 ifIndex |
| Q-BRIDGE-MIB | -- RFC 4268 VlanId |
| SNMPv2-CONF | -- RFC 2579 OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 RowStatus DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15007.2.2 | IdentitymefUniEvcMib | This MIB module contains the management objects for the management of User Network Interfaces (UNIs) and Ethernet Virtual Connections (EVCs) Copyright 2013 Met… | ||
| 1.3.6.1.4.1.15007.2.2.0 | NodemefServiceNotifications | |||
| 1.3.6.1.4.1.15007.2.2.0.1 | NotificationmefServiceConfigurationAlarm | current | An mefServiceConfigurationAlarm notification is sent when the configuration of an object or service is added, deleted, or modified. The ME-NE that receives the… | |
| 1.3.6.1.4.1.15007.2.2.1 | NodemefServiceObjects | |||
| 1.3.6.1.4.1.15007.2.2.1.1 | NodemefServiceInterfaceAttributes | |||
| 1.3.6.1.4.1.15007.2.2.1.1.1 | TablemefServiceInterfaceCfgTable | not-accessible | current | This table represents the local interface configuration table for an MEF Ethernet compliant Network Element (NE). The primary purpose of this table is to provi… |
| 1.3.6.1.4.1.15007.2.2.1.1.1.1 | RowmefServiceInterfaceCfgEntry | not-accessible | current | The conceptual row of mefServiceInterfaceCfgTable. |
| 1.3.6.1.4.1.15007.2.2.1.1.1.1.1 | ColumnmefServiceInterfaceCfgType | read-write | current | This object indicates the configured interface type. One bit in the vector can be set at one time based upon the possible values indicated by mefServiceInterfa… |
| 1.3.6.1.4.1.15007.2.2.1.1.1.1.2 | ColumnmefServiceInterfaceCfgIdentifier | read-write | current | This object indicates the interface identifier and is an arbitrary text string that is used to identify an interface. Unique string values are chosen to unique… |
| 1.3.6.1.4.1.15007.2.2.1.1.1.1.3 | ColumnmefServiceInterfaceCfgFrameFormat | read-write | current | This object indicates the interface frame format type that the interface can recognize. noTag(1) indicates that all data on the interface is as untagged data c… |
| 1.3.6.1.4.1.15007.2.2.1.1.1.1.4 | ColumnmefServiceInterfaceCfgIngressBwpGrpIndex | read-write | current | This object is the index number of the ingress bandwidth profile group associated with the current interface. A value of 0 indicates that no interface ingress … |
| 1.3.6.1.4.1.15007.2.2.1.1.1.1.5 | ColumnmefServiceInterfaceCfgEgressBwpGrpIndex | read-write | current | This object is the index number of the egress bandwidth profile group associated with the current interface. A value of 0 indicates that no interface egress ba… |
| 1.3.6.1.4.1.15007.2.2.1.1.1.1.9 | ColumnmefServiceInterfaceCfgL2cpGrpIndex | read-write | current | This object is the index of the L2CP profile group (mefServiceL2cpGrpCfgIndex) associated with the current interface. A value of 0 indicates that no interface … |
| 1.3.6.1.4.1.15007.2.2.1.1.2 | TablemefServiceInterfaceStatusTable | not-accessible | current | This table represents the local interface status table for an MEF Ethernet compliant NE. The primary purpose of this table is to provide status information of … |
| 1.3.6.1.4.1.15007.2.2.1.1.2.1 | RowmefServiceInterfaceStatusEntry | not-accessible | current | The conceptual row of mefServiceInterfaceStatusTable. |
| 1.3.6.1.4.1.15007.2.2.1.1.2.1.1 | ColumnmefServiceInterfaceStatusType | read-only | current | This object is a vector of bits that indicates the possible interface types that an interface can be configured to. An interface, for instance, can be configur… |
| 1.3.6.1.4.1.15007.2.2.1.1.2.1.2 | ColumnmefServiceInterfaceStatusMaxVc | read-only | current | This object indicates the maximum number of virtual channels that the interface can support. A virtual connection can be an Ethernet Virtual Connection (EVC) o… |
| 1.3.6.1.4.1.15007.2.2.1.1.2.1.3 | ColumnmefServiceInterfaceStatusMaxEndPointPerVc | read-only | current | This object indicates the interface maximum number of end points per virtual channel. It can be used to indicate the maximum number of OVC end points per OVC. … |
| 1.3.6.1.4.1.15007.2.2.1.1.3 | TablemefServiceInterfaceStatisticsTable | not-accessible | current | This table represents the local interface statistics table for an MEF Ethernet compliant NE. The primary purpose of this table is to provide statistics informa… |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1 | RowmefServiceInterfaceStatisticsEntry | not-accessible | current | The conceptual row of mefServiceInterfaceStatisticsTable. |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.1 | ColumnmefServiceInterfaceStatisticsIngressUndersized | read-only | current | This object is incremented for each frame received on a NE interface that was smaller than 64 octets. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.2 | ColumnmefServiceInterfaceStatisticsIngressOversized | read-only | current | This object is incremented for each frame received on a NE interface that was larger than the maximum MTU size. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.3 | ColumnmefServiceInterfaceStatisticsIngressFragments | read-only | current | This object is incremented for each frame received on a NE interface that was less than 64 octets in length (excluding framing bits but including FCS octets) a… |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.4 | ColumnmefServiceInterfaceStatisticsIngressCrcAlignment | read-only | current | This object is incremented for each frame received on a NE interface that was from 64 octets to the maximum MTU size in length, but had either a bad Frame Chec… |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.5 | ColumnmefServiceInterfaceStatisticsIngressInvalidVid | read-only | current | This object is incremented for each frame received on a NE interface with an invalid VLAN ID. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.6 | ColumnmefServiceInterfaceStatisticsIngressOctets | read-only | current | This object is incremented by the number of octets in a valid frame received on a NE interface. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.7 | ColumnmefServiceInterfaceStatisticsIngressUnicast | read-only | current | This object is incremented for each valid unicast frame received on a NE interface. NEs that do not support 64 bit counters can return the upper half of the co… |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.8 | ColumnmefServiceInterfaceStatisticsIngressMulticast | read-only | current | This object is incremented for each valid multicast frame received on a NE interface. ME-NEs that do not support 64 bit counters can return the upper half of t… |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.9 | ColumnmefServiceInterfaceStatisticsIngressBroadcast | read-only | current | This object is incremented for each valid broadcast frame received on a NE interface. ME-NEs that do not support 64 bit counters can return the upper half of t… |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.10 | ColumnmefServiceInterfaceStatisticsEgressOctets | read-only | current | This object is incremented by the number of octets in a frame transmitted on a NE interface. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.11 | ColumnmefServiceInterfaceStatisticsEgressUnicast | read-only | current | This object is incremented for each unicast frame transmitted on a NE interface. ME-NEs that do not support 64 bit counters can return the upper half of the co… |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.12 | ColumnmefServiceInterfaceStatisticsEgressMulticast | read-only | current | This object is incremented for each multicast frame transmitted on a NE interface. ME-NEs that do not support 64 bit counters can return the upper half of the … |
| 1.3.6.1.4.1.15007.2.2.1.1.3.1.13 | ColumnmefServiceInterfaceStatisticsEgressBroadcast | read-only | current | This object is incremented for each broadcast frame transmitted on a NE interface. ME-NEs that do not support 64 bit counters can return the upper half of the … |
| 1.3.6.1.4.1.15007.2.2.1.2 | NodemefServiceUniAttributes | |||
| 1.3.6.1.4.1.15007.2.2.1.2.1 | TablemefServiceUniCfgTable | not-accessible | current | This table represents the specific UNI attributes configuration table for an MEF Ethernet compliant NE. The primary purpose of this table is to provide configu… |
| 1.3.6.1.4.1.15007.2.2.1.2.1.1 | RowmefServiceUniCfgEntry | not-accessible | current | The conceptual row of mefServiceUniCfgTable. |
| 1.3.6.1.4.1.15007.2.2.1.2.1.1.1 | ColumnmefServiceUniCfgIdentifier | read-write | current | This object indicates the UNI identifier. This is distinct from the mefServiceInterfaceCfgIdentifier and allows the naming of the UNI separately from the Inter… |
| 1.3.6.1.4.1.15007.2.2.1.2.1.1.2 | ColumnmefServiceUniCfgBundlingMultiplex | read-create | current | Configures bundling and multiplexing options for the UNI. This object is an enumerated list of possible multiplexing and bundling options on a UNI that is unam… |
| 1.3.6.1.4.1.15007.2.2.1.2.1.1.3 | ColumnmefServiceUniCfgCeVidUntagged | read-create | current | Configures the CE VLAN ID associated with untagged and priority Service Frames. It allows the identification of untagged and priority tagged traffic with a spe… |
| 1.3.6.1.4.1.15007.2.2.1.2.1.1.4 | ColumnmefServiceUniCfgCePriorityUntagged | read-create | current | Configures the CE VLAN Priority associated with untagged Service Frames. It allows the assignment of a specific VLAN priority to untagged traffic. This object … |
| 1.3.6.1.4.1.15007.2.2.1.2.2 | TablemefServiceEvcPerUniCfgTable | not-accessible | current | This table represents the specific EVC per UNI attributes configuration table for an MEF Ethernet compliant NE. The primary purpose of this table is to provide… |
| 1.3.6.1.4.1.15007.2.2.1.2.2.1 | RowmefServiceEvcPerUniCfgEntry | not-accessible | current | The conceptual row of mefServicePerUniCfgTable. |
| 1.3.6.1.4.1.15007.2.2.1.2.2.1.1 | ColumnmefServiceEvcPerUniCfgServiceType | read-only | current | This object indicates the specific Ethernet service type. The value is derived from the EVC object 'mefServiceEvcCfgType' and the UNI object 'mefServiceUniCfgB… |
| 1.3.6.1.4.1.15007.2.2.1.2.2.1.2 | ColumnmefServiceEvcPerUniCfgIdentifier | read-only | current | This object indicates the concatenated EVC-UNI identifier. It is the concatenation of the mefServiceUniCfgIdentifier and the mefServiceEvcCfgIdentifier. |
| 1.3.6.1.4.1.15007.2.2.1.2.2.1.3 | ColumnmefServiceEvcPerUniCfgCeVlanMap | read-write | current | This object indicates the CE-VLANs associated with the specific EVC on a UNI. CE-VLAN IDs have value of 0 to 4095. The CE-VLAN ID list can be a single value or… |
| 1.3.6.1.4.1.15007.2.2.1.2.2.1.4 | ColumnmefServiceEvcPerUniCfgIngressBwpGrpIndex | read-write | current | This object is the index number of the ingress bandwidth profile group associated with the current EVC on a UNI. A value of 0 indicates that no ingress bandwid… |
| 1.3.6.1.4.1.15007.2.2.1.2.2.1.5 | ColumnmefServiceEvcPerUniCfgEgressBwpGrpIndex | read-write | current | This object is the index number of the egress bandwidth profile group associated with the current EVC on a UNI. A value of 0 indicates that no egress bandwidth… |
| 1.3.6.1.4.1.15007.2.2.1.3 | NodemefServiceEvcAttributes | |||
| 1.3.6.1.4.1.15007.2.2.1.3.1 | ScalarmefServiceEvcNextIndex | read-only | current | This object contains an unused value for an EVC on a MEF compliant NE, or a zero to indicate that none exist. This value needs to be read by the SNMP Manager i… |
| 1.3.6.1.4.1.15007.2.2.1.3.2 | TablemefServiceEvcCfgTable | not-accessible | current | This table represents the specific EVC attributes configuration table for an MEF Ethernet compliant NE. The primary purpose of this table is to provide configu… |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1 | RowmefServiceEvcCfgEntry | not-accessible | current | The conceptual row of mefServiceEvcCfgTable. |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.1 | ColumnmefServiceEvcCfgIndex | not-accessible | current | The specific instance of an EVC number. |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.2 | ColumnmefServiceEvcCfgIdentifier | read-create | current | This object indicates the EVC identifier. The identifier is an arbitrary text string that is used to identify an EVC. Unique string values are chosen to unique… |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.3 | ColumnmefServiceEvcCfgServiceType | read-create | current | This object configures the EVC service type for the ME-NE. pointToPoint(1) EVC Point-to-Point service, used for EPL and EVPL services multipointToMultipoint(2)… |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.4 | ColumnmefServiceEvcCfgMtuSize | read-write | current | This object indicates the configured EVC maximum service frame format size. It must be less than or equal to the mefServiceEvcStatusMaxMtuSize. |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.5 | ColumnmefServiceEvcCfgCevlanIdPreservation | read-create | current | This object configures the EVC CE-VLAN ID preservation. preserve(1) The CE-VLAN ID is preserved. The ingress CE-VLAN is the CE-VLAN ID at the egress UNI noPres… |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.6 | ColumnmefServiceEvcCfgCevlanCosPreservation | read-create | current | This object configures EVC CE-VLAN CoS preservation. preserve(1) The CE-VLAN CoS is preserved. The ingress CE-VLAN CoS is the CE-VLAN CoS at the egress UNI noP… |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.7 | ColumnmefServiceEvcCfgUnicastDelivery | read-create | current | This object configures EVC Unicast delivery condition. |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.8 | ColumnmefServiceEvcCfgMulticastDelivery | read-create | current | This object configures EVC Multicast delivery condition. |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.9 | ColumnmefServiceEvcCfgBroadcastDelivery | read-create | current | This object configures EVC Broadcast delivery condition. |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.10 | ColumnmefServiceEvcCfgL2cpGrpIndex | read-write | current | This object is the index of the L2CP profile group (mefServiceL2cpGrpCfgIndex) associated with the current EVC on an interface. A value of 0 indicates that no … |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.11 | ColumnmefServiceEvcCfgAdminState | read-create | current | This object specifies the administrative state of the EVC. If mefServiceEvcCfgAdminState is set to 'locked', the EVC will be administratively locked. If mefSer… |
| 1.3.6.1.4.1.15007.2.2.1.3.2.1.12 | ColumnmefServiceEvcCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.15007.2.2.1.3.3 | TablemefServiceEvcUniCfgTable | not-accessible | current | This table represents the specific EVC attributes configuration table for an MEF Ethernet compliant NE. The primary purpose of this table is to provide configu… |
| 1.3.6.1.4.1.15007.2.2.1.3.3.1 | RowmefServiceEvcUniCfgEntry | not-accessible | current | The conceptual row of mefServiceEvcUniCfgTable. |
| 1.3.6.1.4.1.15007.2.2.1.3.3.1.1 | ColumnmefServiceEvcUniCfgType | read-write | current | This object configures UNI type on an EVC. root(1) Valid setting for all service types. A UNI set to this value may send frames to UNIs configured as 'root' or… |
| 1.3.6.1.4.1.15007.2.2.1.3.3.1.2 | ColumnmefServiceEvcUniCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.15007.2.2.1.3.4 | TablemefServiceEvcStatusTable | not-accessible | current | This table represents the EVC status table for an MEF Ethernet compliant NE. The primary purpose of this table is to provide status information of the EVC for … |
| 1.3.6.1.4.1.15007.2.2.1.3.4.1 | RowmefServiceEvcStatusEntry | not-accessible | current | The conceptual row of mefServiceEvcStatusTable. |
| 1.3.6.1.4.1.15007.2.2.1.3.4.1.1 | ColumnmefServiceEvcStatusMaxMtuSize | read-only | current | This object indicates the EVC maximum configurable service frame format size. The actual configured size is set via the mefServiceEvcCfgMtuSize object. |
| 1.3.6.1.4.1.15007.2.2.1.3.4.1.2 | ColumnmefServiceEvcStatusMaxNumUni | read-only | current | This object indicates the maximum number of UNIs in an EVC. For a Point-to-Point EVC this value is '2'. For a Multipoint EVC the value can be '2' or greater. |
| 1.3.6.1.4.1.15007.2.2.1.3.4.1.3 | ColumnmefServiceEvcStatusOperationalState | read-only | current | This object indicates the operational state (current capability) of the EVC. If the value is 'enabled', the EVC is able to ingress and egress service frames an… |
| 1.3.6.1.4.1.15007.2.2.1.4 | NodemefServiceBwpAttributes | |||
| 1.3.6.1.4.1.15007.2.2.1.4.1 | ScalarmefServiceBwpGrpNextIndex | read-only | current | This object contains an unused value for a bandwidth profile group on a MEF compliant NE, or a zero to indicate that none exist. This value needs to be read by… |
| 1.3.6.1.4.1.15007.2.2.1.4.2 | TablemefServiceBwpGrpCfgTable | not-accessible | current | This table supports bandwidth profile group settings. Rows in this table are created by the SNMP Manager by first reading the mefServiceBwpGrpNextIndex object … |
| 1.3.6.1.4.1.15007.2.2.1.4.2.1 | RowmefServiceBwpGrpCfgEntry | not-accessible | current | Bandwidth profile group settings table entry. |
| 1.3.6.1.4.1.15007.2.2.1.4.2.1.1 | ColumnmefServiceBwpGrpCfgIndex | not-accessible | current | Bandwidth profile group index number |
| 1.3.6.1.4.1.15007.2.2.1.4.2.1.2 | ColumnmefServiceBwpCfgNextIndex | read-only | current | This object indicates the value to be used as the index of the bandwidth profile table entries. This value is automatically incremented when a row is created i… |
| 1.3.6.1.4.1.15007.2.2.1.4.2.1.3 | ColumnmefServiceBwpGrpCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.15007.2.2.1.4.3 | TablemefServiceBwpCfgTable | not-accessible | current | This table supports bandwidth profile settings and allows multiple bandwidth profiles to configured on an interface or a Virtual Service, based upon different … |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1 | RowmefServiceBwpCfgEntry | not-accessible | current | Bandwidth profile settings table entry. |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.1 | ColumnmefServiceBwpCfgIndex | not-accessible | current | This object indicates the bandwidth profile index number. Multiple bandwidth profiles can be set for the same bandwidth profile group, allowing for unique band… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.2 | ColumnmefServiceBwpCfgIdentifier | read-create | current | This object indicates the bandwidth profile identifier for the associated bandwidth profile index and is an arbitrary text string that is used to identify a ba… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.3 | ColumnmefServiceBwpCfgCir | read-create | current | This object indicates the Committed Information Rate (CIR) in kbits/s and defines the average rate in kbits/sec up to which the network delivers Service Frames… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.4 | ColumnmefServiceBwpCfgCbs | read-create | current | This object indicates the Committed Burst Size (CBS) in bytes. It limits the maximum number of bytes available for a burst of Service Frames sent at interface … |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.5 | ColumnmefServiceBwpCfgEir | read-create | current | This object indicates the Excess Information Rate (EIR) in kbits/s and defines the average rate in kbits/sec of Service Frames up to which the network may deli… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.6 | ColumnmefServiceBwpCfgEbs | read-create | current | This object indicates the Excess Burst Size (EBS) in bytes. It limits the maximum number of bytes available for a burst of Service Frames sent at the interface… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.7 | ColumnmefServiceBwpCfgCm | read-create | current | This object configures the bandwidth profile color mode. colorBlind(1) A bandwidth profile property where ingress Service Frames are not pre-colored for either… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.8 | ColumnmefServiceBwpCfgCf | read-create | current | This object configures the bandwidth profile coupling flag and has the effect of controlling the volume of the Service Frames that are declared Yellow. couplin… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.9 | ColumnmefServiceBwpCfgCosIndex | read-write | current | This object is the index number of the CoS ID profile associated with the current bandwidth profile. A value of 0 indicates that no CoS ID profile is associate… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.10 | ColumnmefServiceBwpCfgPerformanceEnable | read-write | current | This object indicates whether a performance data set is configured for a specific bandwidth profile. This allows for only specific bandwidth profiles to be mon… |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.11 | ColumnmefServiceBwpCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.15007.2.2.1.4.4 | TablemefServicePerformanceTable | not-accessible | current | This table supports Traffic Performance Data Set profile settings on a Bandwidth Profile. A row in this table is automatically created when a row in the mefSer… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1 | RowmefServicePerformanceEntry | not-accessible | current | Traffic Performance Data Set profile settings table entry. |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.1 | ColumnmefServicePerformanceIngressGreenFrameCount | read-only | current | This object indicates the number of green frames that were received on a ME-NE for the associated bandwidth profile. ME-NEs that do not support 64 bit counters… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.2 | ColumnmefServicePerformanceIngressYellowFrameCount | read-only | current | This object indicates the number of yellow frames that were received on the ME-NE for the associated bandwidth profile. ME-NEs that do not support 64 bit count… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.3 | ColumnmefServicePerformanceIngressRedFrameCount | read-only | current | This object indicates the number of red frames that were received on the ME-NE for the associated bandwidth profile. ME-NEs that do not support 64 bit counters… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.4 | ColumnmefServicePerformanceIngressGreenOctets | read-only | current | This object indicates the number of valid green octets that were received on the ME-NE for the associated bandwidth profile. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.5 | ColumnmefServicePerformanceIngressYellowOctets | read-only | current | This object indicates the number of valid yellow octets that were received on the ME-NE for the associated bandwidth profile. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.6 | ColumnmefServicePerformanceIngressRedOctets | read-only | current | This object indicates the number of valid red octets that were received on the ME-NE for the associated bandwidth profile. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.7 | ColumnmefServicePerformanceIngressGreenFrameDiscards | read-only | current | This object indicates the number of green frames that were discarded due to congestion within the ME-NE for the associated bandwidth profile. ME-NEs that do no… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.8 | ColumnmefServicePerformanceIngressYellowFrameDiscards | read-only | current | This object indicates the number of yellow frames that were discarded due to congestion within the ME-NE for the associated bandwidth profile. ME-NEs that do n… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.9 | ColumnmefServicePerformanceIngressGreenOctetsDiscards | read-only | current | This object indicates the number of valid green octets that were discarded due to congestion within the ME-NE for the associated bandwidth profile. This object… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.10 | ColumnmefServicePerformanceIngressYellowOctetsDiscards | read-only | current | This object indicates the number of valid yellow octets that were discarded due to congestion within the ME-NE for the associated bandwidth profile. This objec… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.11 | ColumnmefServicePerformanceEgressGreenFrameCount | read-only | current | This object indicates the number of green frames that were transmitted on the ME-NE for the associated bandwidth profile. ME-NEs that do not support 64 bit cou… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.12 | ColumnmefServicePerformanceEgressYellowFrameCount | read-only | current | This object indicates the number of yellow frames that were transmitted on the ME-NE for the associated bandwidth profile. ME-NEs that do not support 64 bit co… |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.13 | ColumnmefServicePerformanceEgressGreenOctets | read-only | current | This object indicates the number of valid green octets that were transmitted on the ME-NE for the associated bandwidth profile. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.4.4.1.14 | ColumnmefServicePerformanceEgressYellowOctets | read-only | current | This object indicates the number of valid yellow octets that were transmitted on the ME-NE for the associated bandwidth profile. This object defaults to '0'. |
| 1.3.6.1.4.1.15007.2.2.1.5 | NodemefServiceCosAttributes | |||
| 1.3.6.1.4.1.15007.2.2.1.5.1 | ScalarmefServiceCosNextIndex | read-only | current | This object contains an unused value for a Class of Service Identifier (CoS ID) profile on a MEF compliant NE, or a zero to indicate that none exist. This valu… |
| 1.3.6.1.4.1.15007.2.2.1.5.2 | TablemefServiceCosCfgTable | not-accessible | current | This table supports Class of Service Identifier profile settings. Rows in this table are created by the SNMP Manager by first reading the mefServiceCosNextInde… |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1 | RowmefServiceCosCfgEntry | not-accessible | current | Class of Service Identifier settings table entry. |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.1 | ColumnmefServiceCosCfgIndex | not-accessible | current | Class of Service Identifier profile index number. |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.2 | ColumnmefServiceCosCfgIdentifier | read-create | current | This object indicates the Class of Service Name for the associated CoS profile index and is an arbitrary text string that is used to identify a CoS ID profile.… |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.3 | ColumnmefServiceCosCfgType | read-create | current | This object configures the CoS ID type and indicates the interpretation of the mefServiceCosIdentifierList object. interface(1) This value indicates that the C… |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.4 | ColumnmefServiceCosCfgIdentifierList | read-write | current | This object indicates the list of CoS identifiers associated with the specific CoS ID profile. Interpretation of the values in the list are based upon the mefS… |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.5 | ColumnmefServiceCosCfgMacAddress | read-create | current | This object configures the L2CP Destination MAC address for CoS Identifier type of 'l2cp' and is ignored for other types. Valid values are 01-80-C2-00-00-00 th… |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.6 | ColumnmefServiceCosCfgProtocol | read-create | current | This object configures the L2CP Ethernet protocol for CoS Identifier type of 'l2cp' and is ignored for other types. It is also ignored if mefServiceCosCfgIdent… |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.7 | ColumnmefServiceCosCfgSubType | read-create | current | This object configures the L2CP subtype protocol for CoS Identifier type of 'l2cp' and is ignored for other types. It is also ignored if mefServiceCosCfgIdenti… |
| 1.3.6.1.4.1.15007.2.2.1.5.2.1.8 | ColumnmefServiceCosCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.15007.2.2.1.6 | NodemefServiceL2cpAttributes | |||
| 1.3.6.1.4.1.15007.2.2.1.6.1 | ScalarmefServiceL2cpGrpNextIndex | read-only | current | This object contains an unused value for a L2CP profile group on a MEF compliant NE, or a zero to indicate that none exist. This value needs to be read by the … |
| 1.3.6.1.4.1.15007.2.2.1.6.2 | TablemefServiceL2cpGrpCfgTable | not-accessible | current | This table supports a group of L2CP settings for an interface via the mefServiceInterfaceCfgL2cpGrpIndex object or for a service via the mefServiceEvcCfgL2cpGr… |
| 1.3.6.1.4.1.15007.2.2.1.6.2.1 | RowmefServiceL2cpGrpCfgEntry | not-accessible | current | L2CP profile group settings table entry on an interface. |
| 1.3.6.1.4.1.15007.2.2.1.6.2.1.1 | ColumnmefServiceL2cpGrpCfgIndex | not-accessible | current | L2CP profile group index number, indicating the specific L2CP profile group |
| 1.3.6.1.4.1.15007.2.2.1.6.2.1.2 | ColumnmefServiceL2cpCfgNextIndex | read-only | current | This object indicates the value to be used as the index of the L2CP table entries. This value is automatically incremented when a row is created in the L2CP ta… |
| 1.3.6.1.4.1.15007.2.2.1.6.2.1.3 | ColumnmefServiceL2cpGrpCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.15007.2.2.1.6.3 | TablemefServiceL2cpCfgTable | not-accessible | current | This table supports L2CP profile settings. Each row in the table indicates a specific L2CP and its processing type. Once a row is created in the mefServiceL2cp… |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1 | RowmefServiceL2cpCfgEntry | not-accessible | current | L2CP settings table entry on an interface or a service. |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1.1 | ColumnmefServiceL2cpCfgIndex | not-accessible | current | This object configures the L2CP index number on an interface or a Service and is used to create/access a L2CP profile within a L2CP group. |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1.2 | ColumnmefServiceL2cpCfgType | read-create | current | This object configures the L2CP processing type setting. discard(1) the indicated L2CP is discarded tunnel(2) the indicated L2CP is tunneled (passed) peer(3) t… |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1.3 | ColumnmefServiceL2cpCfgMatchScope | read-create | current | This object configures the L2CP selection matching scope. destinationAddressOnly(1) L2CP selection is determined by MAC Destination Address only daPlusProtocol… |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1.4 | ColumnmefServiceL2cpCfgMacAddress | read-create | current | This object configures the L2CP Destination MAC address. Valid values are 01-80-C2-00-00-00 through 01-80-C2-00-00-0F and 01-80-C2-00-00-20 through 01-80-C2-00… |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1.5 | ColumnmefServiceL2cpCfgProtocol | read-create | current | This object configures the L2CP Ethernet protocol. The protocol is defined in the Ethertype field of the Ethertype frame. For instance the Ethertype for Link O… |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1.6 | ColumnmefServiceL2cpCfgSubType | read-create | current | This object configures L2CP subtype for the protocol selected. For instance, the subtype for LACP is '2' and Link OAM is '3'. Valid subtype values are defined … |
| 1.3.6.1.4.1.15007.2.2.1.6.3.1.7 | ColumnmefServiceL2cpCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.15007.2.2.1.7 | NodemefServiceNotificationCfg | |||
| 1.3.6.1.4.1.15007.2.2.1.7.1 | ScalarmefServiceNotificationCfgAlarmEnable | read-write | current | This object is a vector of bits that indicates whether a specific notification is enabled. A bit set to '1' enables the specific notification generation. A bit… |
| 1.3.6.1.4.1.15007.2.2.1.8 | NodemefServiceNotificationObj | |||
| 1.3.6.1.4.1.15007.2.2.1.8.1 | ScalarmefServiceNotificationObjDateAndTime | accessible-for-notify | current | This object contains the time and date at the time that the notification event is detected, not the time of the notification generation. This object is used on… |
| 1.3.6.1.4.1.15007.2.2.1.8.2 | ScalarmefServiceNotificationConfigurationChangeType | accessible-for-notify | current | The Notification Configuration Change Type of the object that caused the generation. entryAdded(1) indicates that the specific object/service was added entryDe… |
| 1.3.6.1.4.1.15007.2.2.2 | NodemefServiceMibConformance | |||
| 1.3.6.1.4.1.15007.2.2.2.1 | NodemefServiceUniEvcMibCompliances | |||
| 1.3.6.1.4.1.15007.2.2.2.1.1 | CompliancemefServiceUniMibCompliance | current | The compliance statement for the Ethernet Service UNI-EVC MIB. | |
| 1.3.6.1.4.1.15007.2.2.2.2 | NodemefServiceUniEvcMibGroups | |||
| 1.3.6.1.4.1.15007.2.2.2.2.1 | GroupmefServiceInterfaceMandatoryGroup | current | Mandatory objects for the Interface group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.2 | GroupmefServiceUniMandatoryGroup | current | Mandatory objects for the UNI Attributes group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.3 | GroupmefServiceEvcMandatoryGroup | current | Mandatory objects for the EVC Attributes group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.4 | GroupmefServiceEvcOptionalGroup | current | Optional objects for the EVC Attributes group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.5 | GroupmefServiceBwpMandatoryGroup | current | Mandatory objects for the Bandwidth Profile Attributes group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.6 | GroupmefServiceCosMandatoryGroup | current | Mandatory objects for the Class of Service Attributes group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.7 | GroupmefServiceL2cpMandatoryGroup | current | Mandatory objects for the L2CP Attributes group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.8 | GroupmefServicePerformanceMandatoryGroup | current | Mandatory objects for the Bandwidth Profile Performance group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.9 | GroupmefServicePerformanceOptionalGroup | current | Optional objects for the Bandwidth Profile Performance group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.10 | GroupmefServiceNotificationObjOptionalGroup | current | Optional objects for the Notification Object group. | |
| 1.3.6.1.4.1.15007.2.2.2.2.11 | GroupmefServiceNotificationsOptionalGroup | current | Optional notifications for the Notifications group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MefServiceDeliveryType | INTEGER { discard (1), unconditional (2), conditional (3) } | current | A MEF service can have one of three different delivery types: discard(1) Service Frames are discarded unconditional(2) Service Frames are unconditionally delivered no matter the content of the Service Frame. An example … |
| MefServiceInterfaceType | BITS { bUni1d1(0), bUni1d2(1), bUni2d1(2), bUni2d2(3), bEnni(4), bEnniVuni(5) } | current | A MEF Interface can be one of several types: bUni1d1(0) UNI Type 1.1 bUni1d2(1) UNI Type 1.2 bUni2d1(2) UNI Type 2.1 bUni2d2(3) UNI Type 2.2 bEnni(4) ENNI bEnniVuni(5) VUNI on an ENNI |
| MefServiceListType | OCTET STRING (SIZE (0..255)) | current | An octet string containing a list of item values. An item value is an arbitrary string of octets from ASCII character 0x21 - 0x7E, but may not contain a delimiter character. Delimiter characters are defined to be one of… |
| MefServicePreservationType | INTEGER { preserve (1), noPreserve (2) } | current | Configures the EVC preservation attributes. preserve(1) The type of service is preserved, either CE-VLAN ID or CE-VLAN CoS as indicated by the specific object. noPreserve(2) The type of service is not preserved, either … |