METROPAD3
229 objects
This Module is responsible to map all the Padtec Manageable Equipment to SNMP.
Imported Objects
| RFC1213-MIB | snmp |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.1 | IdentitymoduleIdentity | This Module is responsible to map all the Padtec Manageable Equipment to SNMP. | ||
| 1.3.6.1.4.1.1.1 | NodelightpadMIBGroups | |||
| 1.3.6.1.4.1.1.1.1 | GrouplightpadNotificationsGroup | current | The collection of notifications used to indicate lightpad MIB data consistency and general status information. | |
| 1.3.6.1.4.1.1.1.2 | GrouplightpadGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.3 | GroupboardPerformanceGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.4 | GroupcircuitOmsAssociationGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.5 | GroupomsOtsAssociationGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.6 | GroupnetworkEventLogGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.7 | GroupserverGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.8 | GroupcircuitTrailGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.9 | GroupomsTrailGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.10 | GroupotsTrailGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.11 | GroupnetworkAlarmObjectGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.12 | GroupalarmsNotificationGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.13 | GroupperformanceGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.14 | GroupeventGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.15 | GroupalarmGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.1.1.16 | GroupboardGroup | current | A collection of objects providing basic instrumentation and control of an SNMPv2 entity. | |
| 1.3.6.1.4.1.14846 | Nodepadtec | |||
| 1.3.6.1.4.1.14846.3 | Nodemetropad3 | |||
| 1.3.6.1.4.1.14846.3.1 | TableneTable | not-accessible | current | Contains all the Network Elements which were associated at the Management System. A network element at Padtec platform is a supervisor unit that manages a bund… |
| 1.3.6.1.4.1.14846.3.1.1 | RowneEntry | not-accessible | current | The Network Element. |
| 1.3.6.1.4.1.14846.3.1.1.1 | ColumnneId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.1.1.2 | ColumnneName | read-only | current | It is an unique identifier that describes the Name of Network Element. At Padtec system, this name is unique and duplication are not allowed. |
| 1.3.6.1.4.1.14846.3.1.1.3 | ColumnneNetwork | read-only | current | It describes the network or system which contains the current NE Name. |
| 1.3.6.1.4.1.14846.3.1.1.4 | ColumnneMap | read-only | current | It describes the map which contains the current NE Name. |
| 1.3.6.1.4.1.14846.3.1.1.5 | ColumnneRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.2 | TableboardTable | not-accessible | current | Contains all boards managed by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.2.1 | RowboardEntry | not-accessible | current | The managed board. |
| 1.3.6.1.4.1.14846.3.2.1.1 | ColumnboardId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.2.1.2 | ColumnboardPart | read-only | current | It is the part number which defines the model of Padtec board which is being managed. |
| 1.3.6.1.4.1.14846.3.2.1.3 | ColumnboardSerial | read-only | current | It is the serial number which defines the serial number of determined model of Padtec board which is being managed. |
| 1.3.6.1.4.1.14846.3.2.1.4 | ColumnboardModel | read-only | current | It is the model name of the Padtec board which is being managed. |
| 1.3.6.1.4.1.14846.3.2.1.5 | ColumnboardName | read-only | current | It is the name defined by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.2.1.6 | ColumnboardDescription | read-only | current | It corresponds to the description fullfilled by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.2.1.7 | ColumnboardSubRack | read-only | current | It is the number of sub-rack on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.2.1.8 | ColumnboardSlot | read-only | current | It is the number of slot on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.2.1.9 | ColumnboardVersion | read-only | current | It is the board Version |
| 1.3.6.1.4.1.14846.3.2.1.10 | ColumnboardNeName | read-only | current | It is the name of NE which the correspondent board entry is placed. |
| 1.3.6.1.4.1.14846.3.2.1.11 | ColumnboardNeMap | read-only | current | It describes the map which contains the current NE Name. |
| 1.3.6.1.4.1.14846.3.2.1.12 | ColumnboardState | read-only | current | It identifies the state of the board. |
| 1.3.6.1.4.1.14846.3.2.1.13 | ColumnboardRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.2.1.14 | ColumnboardRackPosition | read-only | current | It is the number of rack position on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.3 | TablealarmTable | not-accessible | current | Contains all the alarms which are raised by Padtec Network Management System. This table does NOT have events. |
| 1.3.6.1.4.1.14846.3.3.1 | RowalarmEntry | not-accessible | current | The alarm at Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.3.1.1 | ColumnalarmId | accessible-for-notify | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.3.1.2 | ColumnalarmType | read-only | current | It is an integer which describes in a unique manner the alarm at Padtec Network Management System. Different types of boards have different numbers of alarmTyp… |
| 1.3.6.1.4.1.14846.3.3.1.3 | ColumnalarmSeverity | read-only | current | It identifies the severity of each alarm. |
| 1.3.6.1.4.1.14846.3.3.1.4 | ColumnalarmName | read-only | current | It is a text that describes the name of the corresponding alarm. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.3.1.5 | ColumnalarmBoardPart | read-only | current | It is a number corresponding to the part number at the boardTable. Every alarm has to have a associated board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.3.1.6 | ColumnalarmBoardSerial | read-only | current | It is a number corresponding to the serial number at the boardTable. Every alarm has to have a associated board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.3.1.7 | ColumnalarmBoardSubRack | read-only | current | It is the number of sub-rack on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.3.1.8 | ColumnalarmBoardSlot | read-only | current | It is the number of slot on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.3.1.9 | ColumnalarmStart | read-only | current | It is the Date and Time when the alarm started, .i.e.,the date and time when the alarm was raised. |
| 1.3.6.1.4.1.14846.3.3.1.10 | ColumnalarmEnd | read-only | current | It is the Date and Time when the alarm ended, .i.e.,the date and time when the alarm was ended. All active alarms have this field as an empty value. |
| 1.3.6.1.4.1.14846.3.3.1.11 | ColumnalarmAckDate | read-only | current | It is the Date and Time when the alarm was acknowledged. |
| 1.3.6.1.4.1.14846.3.3.1.12 | ColumnalarmAckDescription | read-only | current | It is the description corresponding to the text inputed by the user of Padtec Network Management System, or by anotehr NMS that acknowledge the corresponding a… |
| 1.3.6.1.4.1.14846.3.3.1.13 | ColumnalarmAckUser | read-only | current | It is the name of the user that acknowledged the alarm of Padtec Network Management System. If the alarm was acknowledged by another NMS, so this field will ha… |
| 1.3.6.1.4.1.14846.3.3.1.14 | ColumnalarmNeName | read-only | current | It is the name of Network Element at neTable on which the event has been identified. |
| 1.3.6.1.4.1.14846.3.3.1.15 | ColumnalarmNeMap | read-only | current | It describes the map which contains the current NE Name. |
| 1.3.6.1.4.1.14846.3.3.1.16 | ColumnalarmRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.3.1.17 | ColumnalarmBoardRackPosition | read-only | current | It is the number of rack position on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.3.1.18 | ColumnalarmResource | read-only | current | It is a text that describes the name of the corresponding alarm. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.4 | TableeventTable | not-accessible | current | Contains all the events which are raised by Padtec Network Management System. This table does NOT have alarms. So, all the commands sent to the boards are regi… |
| 1.3.6.1.4.1.14846.3.4.1 | RoweventEntry | not-accessible | current | The event which is raised by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.4.1.1 | ColumneventId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.4.1.2 | ColumneventType | read-only | current | It is an integer which describes in a unique manner the event at Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.4.1.3 | ColumneventName | read-only | current | It is a text that describes the name of the corresponding event. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.4.1.4 | ColumneventBoardPart | read-only | current | It is a number corresponding to the part number at the boardTable. Every event has to have a associated board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.4.1.5 | ColumneventBoardSerial | read-only | current | It is a number corresponding to the serial number at the boardTable. Every event has to have a associated board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.4.1.6 | ColumneventBoardSubRack | read-only | current | It is the number of sub-rack on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.4.1.7 | ColumneventBoardSlot | read-only | current | It is the number of slot on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.4.1.8 | ColumneventTime | read-only | current | It is the Date and Time when the event happen. |
| 1.3.6.1.4.1.14846.3.4.1.9 | ColumneventNeName | read-only | current | It is the name of Network Element at NE Table on which the event has been identified. |
| 1.3.6.1.4.1.14846.3.4.1.10 | ColumneventNeMap | read-only | current | It describes the map which contains the current NE Name. |
| 1.3.6.1.4.1.14846.3.4.1.11 | ColumneventRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.4.1.12 | ColumneventBoardRackPosition | read-only | current | It is the number of rack position on which the board of correspondent entry is placed. |
| 1.3.6.1.4.1.14846.3.5 | TableperformanceTable | not-accessible | current | Contains all the measurements which are stored by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.5.1 | RowperformanceEntry | not-accessible | current | A performance measure stored by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.5.1.1 | ColumnperformanceId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.5.1.2 | ColumnperformanceBoardPart | read-only | current | It is a number corresponding to the part number at the boardTable. Every performance measurement is associated with a board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.5.1.3 | ColumnperformanceBoardSerial | read-only | current | It is a number corresponding to the serial number at the boardTable. Every performance measurement is associated with a board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.5.1.5 | ColumnperformanceType | read-only | current | It corresponds to the type of the performance measurement has been taken. See the list of types at the manual. |
| 1.3.6.1.4.1.14846.3.5.1.6 | ColumnperformancePortType | read-only | current | It corresponds to the type of port of the Padtec Board on which the performance measurement has been taken. |
| 1.3.6.1.4.1.14846.3.5.1.7 | ColumnperformancePortNumber | read-only | current | It corresponds the port number of the Padtec Board on which the performance measurenebt has been taken. |
| 1.3.6.1.4.1.14846.3.5.1.8 | ColumnperformanceValue | read-only | current | It corresponds to the performance measurements multipled by 100, in such way that is possible to represent measurements with 2 number precisions. For instance,… |
| 1.3.6.1.4.1.14846.3.5.1.9 | ColumnperformanceRate | read-only | current | It describes the performance measurements which are displayed at scientific notation. Therefore, all the error rates, transmission rates are mapped at this col… |
| 1.3.6.1.4.1.14846.3.5.1.10 | ColumnperformanceTime | read-only | current | It corresponds to the Date and Time when the performance measurement was stored by the Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.5.1.11 | ColumnperformanceNeName | read-only | current | It is the name of NE which the correspondent board entry is placed. |
| 1.3.6.1.4.1.14846.3.5.1.12 | ColumnperformanceNeMap | read-only | current | It describes the map which contains the current NE Name. |
| 1.3.6.1.4.1.14846.3.5.1.13 | ColumnperformanceRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.5.1.14 | ColumnperformanceOid | read-only | current | It is a number corresponding to the part number at the boardTable. Every performance measurement is associated with a board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.6 | NodeserverStatus | |||
| 1.3.6.1.4.1.14846.3.6.1 | ScalarserverMasterIp | read-only | current | It corresponds to the IP Address of the configured Master Server. |
| 1.3.6.1.4.1.14846.3.6.2 | ScalarserverSlaveIp | read-only | current | It corresponds to the IP Address of the configured Slave Server. |
| 1.3.6.1.4.1.14846.3.6.3 | ScalarserverIsActive | read-only | current | It corresponds to the IP Address of the current server which is as active. |
| 1.3.6.1.4.1.14846.3.6.4 | ScalarserverVersion | read-only | current | It has the version of the Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.6.5 | ScalarserverBuild | read-only | current | It has the number of the build at the following notation yyyymmdd. Therefore, this field has a value like yyyymmdd. Where yyyy corresponds to the year, mm to t… |
| 1.3.6.1.4.1.14846.3.6.6 | ScalarserverUpTime | read-only | current | It describes the period of time that happened since the current Active Master is running. |
| 1.3.6.1.4.1.14846.3.6.7 | ScalarserverSo | read-only | current | It describes the operating system on whoch the server is being installed. |
| 1.3.6.1.4.1.14846.3.6.8 | ScalarserverFreeDiskSpace | read-only | current | It has the total of free space at the partition on which the server is running. This partition to be monitored can be configured at the Padtec Network Manageme… |
| 1.3.6.1.4.1.14846.3.6.9 | ScalarserverSync | read-only | current | It identifies if the master and slave servers have the database synchronized. |
| 1.3.6.1.4.1.14846.3.7 | NotificationalarmStartNotification | current | It corresponds to a notification when an alarm is raised. alarmId not is sent when parameter -DsendalarmId as value false. | |
| 1.3.6.1.4.1.14846.3.8 | NotificationalarmEndNotification | current | It corresponds to a notification when an alarm is terminated. obs alarmId not is sent when parameter -DsendalarmId as value false. | |
| 1.3.6.1.4.1.14846.3.9 | NotificationalarmAckNotification | current | It corresponds to a notification when an alarm is acknowledge. obs alarmId not is sent when parameter -DsendalarmId as value false. | |
| 1.3.6.1.4.1.14846.3.10 | NotificationeventNotification | current | It corresponds to a notification when an event happen. | |
| 1.3.6.1.4.1.14846.3.11 | NotificationisAliveNotification | current | It corresponds to a notification to show system is still alive. | |
| 1.3.6.1.4.1.14846.3.12 | TablenetworkAlarmTable | not-accessible | current | Contains the Padtec Network Management System alarms. This table does NOT have system events (see eventTable) neither EMS alarms (see alarmTable). |
| 1.3.6.1.4.1.14846.3.12.1 | RownetworkAlarmEntry | not-accessible | current | The Padtec Network Management System alarms. |
| 1.3.6.1.4.1.14846.3.12.1.1 | ColumnnetworkAlarmId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.12.1.2 | ColumnnetworkAlarmSeverity | read-only | current | It identifies the severity of each alarm. |
| 1.3.6.1.4.1.14846.3.12.1.3 | ColumnnetworkAlarmKey | read-only | current | It is an integer which describes in a unique manner the alarm at Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.12.1.4 | ColumnnetworkAlarmGroup | read-only | current | The category of this alarm as defined by CCITT Recommendation X.733. |
| 1.3.6.1.4.1.14846.3.12.1.5 | ColumnnetworkAlarmStart | read-only | current | It is the Date and Time when the alarm started, .i.e.,the date and time when the event happened. |
| 1.3.6.1.4.1.14846.3.12.1.6 | ColumnnetworkAlarmEnd | read-only | current | It is the Date and Time when the alarm ended. All active (not cleared ones) alarms show the value 1969-12-31,22:0:0.0,-3:0. |
| 1.3.6.1.4.1.14846.3.12.1.7 | ColumnnetworkAlarmNetworkName | read-only | current | The name of the network affected by the alarm. |
| 1.3.6.1.4.1.14846.3.12.1.8 | ColumnnetworkAlarmResource | read-only | current | The name of the affected trail or circuit. |
| 1.3.6.1.4.1.14846.3.12.1.9 | ColumnnetworkAlarmLayer | read-only | current | The Layer of the alarm: tranport (1), multiplex (2) or end-to-end (3). |
| 1.3.6.1.4.1.14846.3.12.1.10 | ColumnnetworkAlarmNeName | read-only | current | It is the name of Network Element at NE Table on which the event has been identified. |
| 1.3.6.1.4.1.14846.3.12.1.11 | ColumnnetworkAlarmBoardName | read-only | current | The name of the affected board. |
| 1.3.6.1.4.1.14846.3.12.1.12 | ColumnnetworkAlarmName | read-only | current | It is a text that describes the name of the corresponding alarm. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.12.1.13 | ColumnnetworkAlarmType | read-only | current | Shows the kind of this network alarm. |
| 1.3.6.1.4.1.14846.3.12.1.14 | ColumnnetworkAlarmNeNameSource | read-only | current | The name of the source NE of the affected trail or circuit. |
| 1.3.6.1.4.1.14846.3.12.1.15 | ColumnnetworkAlarmBoardNameSource | read-only | current | The name of the source board of the affected trail or circuit. |
| 1.3.6.1.4.1.14846.3.12.1.16 | ColumnnetworkAlarmPortNameSource | read-only | current | The name of the source port/interface of the affected trail or circuit. |
| 1.3.6.1.4.1.14846.3.12.1.17 | ColumnnetworkAlarmNeNameDestination | read-only | current | The name of the destination NE of the affected trail or circuit. |
| 1.3.6.1.4.1.14846.3.12.1.18 | ColumnnetworkAlarmBoardNameDestination | read-only | current | The name of the destination board of the affected trail or circuit. |
| 1.3.6.1.4.1.14846.3.12.1.19 | ColumnnetworkAlarmPortNameDestination | read-only | current | The name of the destination port/interface of the affected trail or circuit. |
| 1.3.6.1.4.1.14846.3.12.1.20 | ColumnnetworkAlarmAck | read-only | current | Identifies if the alarm was acknowledged. This object has the value 'true(1)', if this alarm was acknowledged and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.14846.3.12.1.21 | ColumnnetworkAlarmAckDate | read-only | current | It is the Date and Time when the alarm was acknowledged or 1969-12-31,22:0:0.0,-3:0 for alarms not acknowledged. |
| 1.3.6.1.4.1.14846.3.12.1.22 | ColumnnetworkAlarmAckUser | read-only | current | It is the name of the user that acknowledged the alarm of Padtec Network Management System. If the alarm was acknowledged by another NMS, so this field will ha… |
| 1.3.6.1.4.1.14846.3.12.1.23 | ColumnnetworkAlarmRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.13 | TableotsTrailTable | not-accessible | current | Contains all OTS trails. |
| 1.3.6.1.4.1.14846.3.13.1 | RowotsTrailEntry | not-accessible | current | The OTS Trail. |
| 1.3.6.1.4.1.14846.3.13.1.1 | ColumnotsTrailId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.13.1.2 | ColumnotsTrailName | read-only | current | The name of this trail OTS. |
| 1.3.6.1.4.1.14846.3.13.1.3 | ColumnotsTrailDescription | read-only | current | The description of this trail OTS. |
| 1.3.6.1.4.1.14846.3.13.1.4 | ColumnotsTrailFiberType | read-only | current | The type of optical fiber. |
| 1.3.6.1.4.1.14846.3.13.1.5 | ColumnotsTrailDistance | read-only | current | The distance of this OTS Trail in kilometers multipled by 100, in such way that is possible to represent measurements with 2 number precisions. For instance, i… |
| 1.3.6.1.4.1.14846.3.13.1.6 | ColumnotsTrailSourceNE | read-only | current | The name of this OTS trail's source NE. See neTable. |
| 1.3.6.1.4.1.14846.3.13.1.7 | ColumnotsTrailSourceBoard | read-only | current | The name of this OTS trail's source board. See boardTable. |
| 1.3.6.1.4.1.14846.3.13.1.8 | ColumnotsTrailSourcePort | read-only | current | The name of this OTS trail's source port/interface. |
| 1.3.6.1.4.1.14846.3.13.1.9 | ColumnotsTrailDestinationNE | read-only | current | The name of this OTS trail's destination NE. See neTable. |
| 1.3.6.1.4.1.14846.3.13.1.10 | ColumnotsTrailDestinationBoard | read-only | current | The name of this OTS trail's destination board. See boardTable. |
| 1.3.6.1.4.1.14846.3.13.1.11 | ColumnotsTrailDestinationPort | read-only | current | The name of this OTS trail's destination port/interface. |
| 1.3.6.1.4.1.14846.3.13.1.12 | ColumnotsTrailDatabaseId | read-only | current | It is a unique ID to identifiy a row of this table. The id's negatives represents back path. |
| 1.3.6.1.4.1.14846.3.13.1.13 | ColumnotsTrailRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.14 | TableomsTrailTable | not-accessible | current | Contains all Optical Multiplex Section (OMS) Trails. |
| 1.3.6.1.4.1.14846.3.14.1 | RowomsTrailEntry | not-accessible | current | The Optical Multiplex Section (OMS). |
| 1.3.6.1.4.1.14846.3.14.1.1 | ColumnomsTrailId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.14.1.2 | ColumnomsTrailName | read-only | current | The identifier of the OMS Trail. |
| 1.3.6.1.4.1.14846.3.14.1.3 | ColumnomsTrailDescription | read-only | current | The description of the OMS Trail. |
| 1.3.6.1.4.1.14846.3.14.1.4 | ColumnomsTrailSourceNE | read-only | current | The name of this OMS trail's source NE. See neTable. |
| 1.3.6.1.4.1.14846.3.14.1.5 | ColumnomsTrailSourceBoard | read-only | current | The name of this OMS trail's source board. See boardTable. |
| 1.3.6.1.4.1.14846.3.14.1.6 | ColumnomsTrailSourcePort | read-only | current | The name of this OMS trail's source port/interface. |
| 1.3.6.1.4.1.14846.3.14.1.7 | ColumnomsTrailDestinationNE | read-only | current | The name of this OMS trail's destination NE. See neTable. |
| 1.3.6.1.4.1.14846.3.14.1.8 | ColumnomsTrailDestinationBoard | read-only | current | The name of this OMS trail's destination board. See boardTable. |
| 1.3.6.1.4.1.14846.3.14.1.9 | ColumnomsTrailDestinationPort | read-only | current | The name of this OMS trail's destination port/interface. |
| 1.3.6.1.4.1.14846.3.14.1.10 | ColumnomsTrailDatabaseId | read-only | current | The identifier of the OMS Trail. The id's negatives represents back path. |
| 1.3.6.1.4.1.14846.3.14.1.11 | ColumnomsTrailRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.15 | TablecircuitTrailTable | not-accessible | current | Contains all circuit end-to-end trails. |
| 1.3.6.1.4.1.14846.3.15.1 | RowcircuitTrailEntry | not-accessible | current | The circuit end-to-end trail. |
| 1.3.6.1.4.1.14846.3.15.1.1 | ColumncircuitTrailId | not-accessible | current | It is a unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.15.1.2 | ColumncircuitTrailName | read-only | current | Identifier of the end-to-end circuit. |
| 1.3.6.1.4.1.14846.3.15.1.3 | ColumncircuitTrailDescription | read-only | current | The description of the end-to-end circuit |
| 1.3.6.1.4.1.14846.3.15.1.4 | ColumncircuitTrailClientName | read-only | current | The name of the client of the circuit. |
| 1.3.6.1.4.1.14846.3.15.1.5 | ColumncircuitTrailClientId | read-only | current | The identifier of the client of circuit. |
| 1.3.6.1.4.1.14846.3.15.1.6 | ColumncircuitTrailService | read-only | current | The service of the end-to-end circuit. |
| 1.3.6.1.4.1.14846.3.15.1.7 | ColumncircuitTrailSourceNetwork | read-only | current | The name of the circuit's source network. |
| 1.3.6.1.4.1.14846.3.15.1.8 | ColumncircuitTrailSourceNE | read-only | current | The name of this circuit's source NE. See neTable. |
| 1.3.6.1.4.1.14846.3.15.1.9 | ColumncircuitTrailSourceBoard | read-only | current | The name of this circuit's source board. See boardTable. |
| 1.3.6.1.4.1.14846.3.15.1.10 | ColumncircuitTrailSourcePort | read-only | current | The name of this circuit's source port/interface. |
| 1.3.6.1.4.1.14846.3.15.1.11 | ColumncircuitTrailDestinationNetwork | read-only | current | The name of this circuit's destination network. |
| 1.3.6.1.4.1.14846.3.15.1.12 | ColumncircuitTrailDestinationNE | read-only | current | The name of this circuit's destination NE. See neTable. |
| 1.3.6.1.4.1.14846.3.15.1.13 | ColumncircuitTrailDestinationBoard | read-only | current | The name of this circuit's destination board. See boardTable. |
| 1.3.6.1.4.1.14846.3.15.1.14 | ColumncircuitTrailDestinationPort | read-only | current | The name of this circuit's destination port/interface. |
| 1.3.6.1.4.1.14846.3.15.1.15 | ColumncircuitTrailDatabaseId | read-only | current | It is a unique ID to identifiy a row of this table. The id's negatives represents back path. |
| 1.3.6.1.4.1.14846.3.15.1.16 | ColumncircuitTrailRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.16 | NotificationnetworkAlarmStartNotification | current | Start of an alarm. Contains all the information of the alarm and should be used for logging purposes. | |
| 1.3.6.1.4.1.14846.3.17 | NotificationnetworkAlarmEndNotification | current | End of an alarm. Contains all the information of the alarm and should be used for logging purposes. | |
| 1.3.6.1.4.1.14846.3.18 | NotificationnetworkAlarmAckNotification | current | Acknowledgement of an alarm. The alarm may not be terminated. | |
| 1.3.6.1.4.1.14846.3.19 | TablenetworkEventLogTable | not-accessible | current | This table has the events which are raised by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.19.1 | RownetworkEventLogEntry | not-accessible | current | The event which is raised by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.19.1.1 | ColumnnetworkEventLogId | not-accessible | current | It is unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.19.1.2 | ColumnnetworkEventLogTime | read-only | current | It is the Date and Time when the event happen. |
| 1.3.6.1.4.1.14846.3.19.1.3 | ColumnnetworkEventLogResourceType | read-only | current | The type of the resource affected by this event. |
| 1.3.6.1.4.1.14846.3.19.1.4 | ColumnnetworkEventLogResourceName | read-only | current | The name of the resource affected by this event. |
| 1.3.6.1.4.1.14846.3.19.1.5 | ColumnnetworkEventLogAction | read-only | current | The executed action. |
| 1.3.6.1.4.1.14846.3.19.1.6 | ColumnnetworkEventLogRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.20 | NotificationnetworkEventLogNotification | current | It corresponds to a notification when an event is raised by Padtec Network Management System. | |
| 1.3.6.1.4.1.14846.3.21 | NotificationnetworkAlarmChangeNotification | current | Change of a network alarm. Contains all the information of a network alarm and should be used for logging purposes. | |
| 1.3.6.1.4.1.14846.3.22 | TabletrailAssociationTable | not-accessible | current | This table represents all the contained OTS belonging to the same OMS Trail. |
| 1.3.6.1.4.1.14846.3.22.1 | RowtrailAssociationEntry | not-accessible | current | The event which is raised by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.22.1.1 | ColumnomsOtsAssociationTrailIdIndex | not-accessible | current | It is unique ID to identifiy a row of this table. |
| 1.3.6.1.4.1.14846.3.22.1.2 | ColumnomsOtsAssociationOtsTrailId | read-only | current | It is unique ID to identifiy a row of the OTS Trail table. The id's negatives represents back path. |
| 1.3.6.1.4.1.14846.3.22.1.3 | ColumnomsOtsAssociationOmsTrailId | read-only | current | It is unique ID to identifiy a row of the OMS Trail table. The id's negatives represents back path. |
| 1.3.6.1.4.1.14846.3.22.1.4 | ColumnomsOtsAssociationRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.23 | TablecircuitAssociationOmsTable | not-accessible | current | This table represents all the contained OTS belonging to the same OMS Trail. |
| 1.3.6.1.4.1.14846.3.23.1 | RowcircuitAssociationOmsEntry | not-accessible | current | The event which is raised by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.23.1.1 | ColumncircuitOmsAssociationTrailIdIndex | not-accessible | current | It is unique ID to identifiy a row of this table. The id's negatives represents back path. |
| 1.3.6.1.4.1.14846.3.23.1.2 | ColumncircuitOmsAssociationCircuitTrailId | read-only | current | It is unique ID to identifiy a row of the Circuit Trail table. The id's negatives represents back path. |
| 1.3.6.1.4.1.14846.3.23.1.3 | ColumncircuitOmsAssociationOmsTrailId | read-only | current | It is unique ID to identifiy a row of the OMS Trail table. |
| 1.3.6.1.4.1.14846.3.23.1.4 | ColumncircuitOmsAssociationRowStatus | read-create | current | The RowStatus of this entry. |
| 1.3.6.1.4.1.14846.3.24 | NotificationisRecreateAlarmsNotification | current | It corresponds to a notification to recreate Alarmes | |
| 1.3.6.1.4.1.14846.3.24.1 | ScalaralarmsNotificationBoardPart | read-only | current | It is a text that describes the name of the corresponding event. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.24.2 | ScalaralarmsNotificationBoardSerial | read-only | current | It is a text that describes the name of the corresponding event. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.24.3 | ScalaralarmsNotificationBoardName | read-only | current | It is a text that describes the name of the corresponding event. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.24.4 | ScalaralarmsNotificationNeName | read-only | current | It is a text that describes the name of the corresponding event. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.25 | NotificationisStatusNotification | current | It corresponds to a notification to show system is still alive. | |
| 1.3.6.1.4.1.14846.3.25.1 | ScalarstatusAgente | read-only | current | It is a text that describes the name of the corresponding event. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.25.2 | ScalaruptimeAgente | read-only | current | It is a text that describes the name of the corresponding event. It has the same text as viewed by the user of Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.26 | TableboardPerformanceTable | not-accessible | current | Contains all the measurements which are stored by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.26.1 | RowboardPerformanceEntry | not-accessible | current | A performance measure stored by Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.26.1.1 | ColumnboardPerformanceBoardPart | not-accessible | current | It is a number corresponding to the part number at the boardTable. Every performance measurement is associated with a board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.26.1.2 | ColumnboardPerformanceBoardSerial | not-accessible | current | It is a number corresponding to the serial number at the boardTable. Every performance measurement is associated with a board identified at boardTable. |
| 1.3.6.1.4.1.14846.3.26.1.3 | ColumnboardPerformanceType | not-accessible | current | It corresponds to the type of the performance measurement has been taken. See the list of types at the manual. |
| 1.3.6.1.4.1.14846.3.26.1.4 | ColumnboardPerformancePortNumber | not-accessible | current | It corresponds the port number of the Padtec Board on which the performance measurenebt has been taken. |
| 1.3.6.1.4.1.14846.3.26.1.5 | ColumnboardPerformancePortType | not-accessible | current | It corresponds to the type of port of the Padtec Board on which the performance measurement has been taken. |
| 1.3.6.1.4.1.14846.3.26.1.6 | ColumnboardPerformanceValue | read-only | current | It corresponds to the performance measurements multipled by 100, in such way that is possible to represent measurements with 2 number precisions. For instance,… |
| 1.3.6.1.4.1.14846.3.26.1.7 | ColumnboardPerformanceRate | read-only | current | It describes the performance measurements which are displayed at scientific notation. Therefore, all the error rates, transmission rates are mapped at this col… |
| 1.3.6.1.4.1.14846.3.26.1.8 | ColumnboardPerformanceTime | read-only | current | It corresponds to the Date and Time when the performance measurement was stored by the Padtec Network Management System. |
| 1.3.6.1.4.1.14846.3.26.1.9 | ColumnboardPerformanceNeName | read-only | current | It is the name of NE which the correspondent board entry is placed. |
| 1.3.6.1.4.1.14846.3.26.1.10 | ColumnboardPerformanceNeMap | read-only | current | It describes the map which contains the current NE Name. |
| 1.3.6.1.4.1.14846.3.26.1.11 | ColumnboardPerformanceRowStatus | read-create | current | The RowStatus of this entry. |