MIB Viewer

MIMOSA-NETWORKS-BFIVE-MIB

91 objects
Mimosa device MIB definitions
Imported Objects
IF-MIBifIndex
MIMOSA-NETWORKS-BASE-MIBmimosaConformanceGroup mimosaWireless
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString MacAddress PhysAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.43356.2.1.2.1NodemimosaGeneral
1.3.6.1.4.1.43356.2.1.2.1.1ScalarmimosaDeviceNameread-onlycurrentThe name of the local Mimosa device. This unique identifier could be the same as the sysName object.
1.3.6.1.4.1.43356.2.1.2.1.2ScalarmimosaSerialNumberread-onlycurrentThe unique serial number of the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.3ScalarmimosaFirmwareVersionread-onlycurrentThe version of the currently installed and/or running firmware on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.4ScalarmimosaFirmwareBuildDateread-onlycurrentThe creation date of the currently installed and/or running firmware on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.5ScalarmimosaLastRebootTimeread-onlycurrentThe last time the Mimosa device rebooted.
1.3.6.1.4.1.43356.2.1.2.1.6ScalarmimosaUnlockCoderead-onlycurrentThe code used to unlock the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.7ScalarmimosaLEDBrightnessread-onlycurrentIndicates the intensity of the status indicator lights on the device exterior. The Auto option adjusts the amount of light based upon ambient conditions. Manua…
1.3.6.1.4.1.43356.2.1.2.1.8ScalarmimosaInternalTempread-onlycurrentThe internal temperature of the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.9ScalarmimosaRegulatoryDomainread-onlycurrentThe country in which the Mimosa device has been configured to run.
1.3.6.1.4.1.43356.2.1.2.2NodemimosaLocInfo
1.3.6.1.4.1.43356.2.1.2.2.1ScalarmimosaLongituderead-onlycurrentThe Longitude of the Mimosa device location, in 5 decimal points.
1.3.6.1.4.1.43356.2.1.2.2.2ScalarmimosaLatituderead-onlycurrentThe Latitude of the Mimosa device location, in 5 decimal points.
1.3.6.1.4.1.43356.2.1.2.2.3ScalarmimosaAltituderead-onlycurrentThe Altitude of the Mimosa device location in meters.
1.3.6.1.4.1.43356.2.1.2.2.4ScalarmimosaSatelliteSNRread-onlycurrentThe average Signal to Noise Ratio (SNR) amongst all of the satellites detected by the Mimosa device. Display is in 1 decimal point.
1.3.6.1.4.1.43356.2.1.2.2.5ScalarmimosaSatelliteStrengthread-onlycurrentStrength of the satellites based on the number of satellites available. It is considered good if more than 2 satellites are available.
1.3.6.1.4.1.43356.2.1.2.2.6ScalarmimosaGPSSatellitesread-onlycurrentTotal number of GPS satellites detected.
1.3.6.1.4.1.43356.2.1.2.2.7ScalarmimosaGlonassSatellitesread-onlycurrentTotal number of GLONASS satellites detected.
1.3.6.1.4.1.43356.2.1.2.2.8ScalarmimosaClockAccuracyread-onlycurrentTiming signal accuracy measured in parts per billion (PPB) by the Mimosa device. Display is in 2 decimal points.
1.3.6.1.4.1.43356.2.1.2.3NodemimosaWanInfo
1.3.6.1.4.1.43356.2.1.2.3.1ScalarmimosaWanSsidread-onlycurrentThe wireless link name used by both radios. Both AP and Station must use the same SSID to communicate with each other.
1.3.6.1.4.1.43356.2.1.2.3.2ScalarmimosaWanMacread-onlycurrentThe MAC address used for the wireless link.
1.3.6.1.4.1.43356.2.1.2.3.3ScalarmimosaWanStatusread-onlycurrentThe wireless link status between the Mimosa devices.
1.3.6.1.4.1.43356.2.1.2.3.4ScalarmimosaWanUpTimeread-onlycurrentThe wireless link up time since last reboot.
1.3.6.1.4.1.43356.2.1.2.4NodemimosaTdmaInfo
1.3.6.1.4.1.43356.2.1.2.4.1ScalarmimosaWirelessModeread-onlycurrentDescribes wherger the Mimosa device acts as an access point or station.
1.3.6.1.4.1.43356.2.1.2.4.2ScalarmimosaWirelessProtocolread-onlycurrentDescribes the wireless protocol configured on the Mimosa device. Both TDMA and CSMA are supported. TDMA is a deterministic protocol where each device is assign…
1.3.6.1.4.1.43356.2.1.2.4.3ScalarmimosaTDMAModeread-onlycurrentSpecifies the TDMA Gender of the radio (A or B).
1.3.6.1.4.1.43356.2.1.2.4.4ScalarmimosaTDMAWindowread-onlycurrentSpecifies the length of the transmit time slot in milliseconds.
1.3.6.1.4.1.43356.2.1.2.4.5ScalarmimosaTrafficSplitread-onlycurrentThe radio can be configured to allocate bandwidth symmetrically (50/50) or asymmetrically (75/25 or 25/75) in environments where traffic direction is expected …
1.3.6.1.4.1.43356.2.1.2.5NodemimosaMgmtInfo
1.3.6.1.4.1.43356.2.1.2.5.1ScalarmimosaNetworkModeread-onlycurrentSpecifies the mode for the local 2.4 GHz wireless network operation. If Auto is selected, the 2.4 GHz management network is turned on for a limited time (defin…
1.3.6.1.4.1.43356.2.1.2.5.2ScalarmimosaRecoverySsidread-onlycurrentThe recovery SSID that allows the device to be reset to factory defaults. This is available for 10 minutes after device boot. Disabling the 2.4 GHz management …
1.3.6.1.4.1.43356.2.1.2.5.3ScalarmimosaLocalSsidread-onlycurrentThe SSID for managing the local 2.4 GHz wireless interface.
1.3.6.1.4.1.43356.2.1.2.5.4ScalarmimosaLocalChannelread-onlycurrentThe channel used for the local 2.4 GHz wireless interface.
1.3.6.1.4.1.43356.2.1.2.5.5ScalarmimosaConsoleTimeoutread-onlycurrentThe amount inactivity on the 2.4 GHz wireless interface before turning it off in Auto mode.
1.3.6.1.4.1.43356.2.1.2.5.6ScalarmimosaMaxClientsread-onlycurrentThe maximum number of wireless clients that can simultaneously access the 2.4 GHz management interface.
1.3.6.1.4.1.43356.2.1.2.5.7ScalarmimosaLocalMacread-onlycurrentThe MAC address used for 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.8ScalarmimosaLocalIpAddrread-onlycurrentThe IP address assigned to the 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.9ScalarmimosaLocalNetMaskread-onlycurrentThe IP netmask assigned to the 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.10ScalarmimosaLocalGatewayread-onlycurrentThe IP address of the gateway for the 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.11ScalarmimosaFlowControlread-onlycurrentSpecifies whether Flow Control is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6NodemimosaRfInfo
1.3.6.1.4.1.43356.2.1.2.6.1TablemimosaChainTablenot-accessiblecurrentA list of RF chain entries, which is part of MIMO tables. MIMO stands for Multiple In Multiple Out.
1.3.6.1.4.1.43356.2.1.2.6.1.1RowmimosaChainEntrynot-accessiblecurrentAn entry containing chain information applicable to a particular RF chain.
1.3.6.1.4.1.43356.2.1.2.6.1.1.1ColumnmimosaChainnot-accessiblecurrentAn index which is used to access a particular entry in the chain table.
1.3.6.1.4.1.43356.2.1.2.6.1.1.2ColumnmimosaTxPowerread-onlycurrentSpecifies the transmit power of the given RF chain. A value of -8 means this particular TxChain is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.1.1.3ColumnmimosaRxPowerread-onlycurrentSpecifies the receive power of the given RF chain. A value of -100 means this particular RxChain is not a valid entry (SNR must be -100).
1.3.6.1.4.1.43356.2.1.2.6.1.1.4ColumnmimosaRxNoiseread-onlycurrentSpecifies the received noise level for the given RF chain.
1.3.6.1.4.1.43356.2.1.2.6.1.1.5ColumnmimosaSNRread-onlycurrentIndicates the Signal to Noise Ratio (SNR) for the given RF chain. A value of -100 means this particular RxChain is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.1.1.6ColumnmimosaCenterFreqread-onlycurrentThe center frequency for the given RF chain. A value of 0 means this particular Chain is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.1.1.7ColumnmimosaPolarizationread-onlycurrentThe ploarization of the given RF chain. It could be horizontal or vertical.
1.3.6.1.4.1.43356.2.1.2.6.2TablemimosaStreamTablenot-accessiblecurrentA list of data stream entries, which are part of MIMO tables. MIMO stands for Multiple In Multiple Out.
1.3.6.1.4.1.43356.2.1.2.6.2.1RowmimosaStreamEntrynot-accessiblecurrentThe entry containing information applicable to a particular stream.
1.3.6.1.4.1.43356.2.1.2.6.2.1.1ColumnmimosaStreamnot-accessiblecurrentThe index used to access a particular entry in the stream table.
1.3.6.1.4.1.43356.2.1.2.6.2.1.2ColumnmimosaTxPhyread-onlycurrentSpecifies the transmit rate of the given data stream.
1.3.6.1.4.1.43356.2.1.2.6.2.1.3ColumnmimosaTxMCSread-onlycurrentSpecifies the transmit MCS of the given data stream. A value of -1 means this particular TxStream is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.2.1.4ColumnmimosaTxWidthread-onlycurrentSpecifies the channel width based on MCS. A value of -1 means this particular TxWidth is not a valid entry
1.3.6.1.4.1.43356.2.1.2.6.2.1.5ColumnmimosaRxPhyread-onlycurrentSpecifies the receive rate of the given data stream.
1.3.6.1.4.1.43356.2.1.2.6.2.1.6ColumnmimosaRxMCSread-onlycurrentSpecifies the receive MCS of the given data stream. A value of -1 means this particular RxStream is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.2.1.7ColumnmimosaRxWidthread-onlycurrentSpecifies the receive Rx Width of the given data stream. A value of -1 means this particular RxWidth is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.2.1.8ColumnmimosaRxEVMread-onlycurrentSpecifies the receive Error Vector Magnitude (EVM) of the given data stream.
1.3.6.1.4.1.43356.2.1.2.6.3TablemimosaChannelTablenot-accessiblecurrentA list of RF channel entries on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.3.1RowmimosaChannelEntrynot-accessiblecurrentThe entry containing management information applicable to a particular channel.
1.3.6.1.4.1.43356.2.1.2.6.3.1.1ColumnmimosaChannelnot-accessiblecurrentThe index used to access a particular entry in the RF channel table.
1.3.6.1.4.1.43356.2.1.2.6.3.1.2ColumnmimosaChannelModeread-onlycurrentSpecifies the mode for the given channel. The transmit or receive values indicate Frequency Diversity (FD) mode is in use. The bidirectional value means that t…
1.3.6.1.4.1.43356.2.1.2.6.3.1.3ColumnmimosaChannelWidthread-onlycurrentSpecifies the channel width of the given channel.
1.3.6.1.4.1.43356.2.1.2.6.3.1.4ColumnmimosaChannelTxPowerread-onlycurrentSpecifies the transmit power level on the channel. If Channel Width is set to 1xN MHz, Channel 2 is not be used. In Frequency Diversity mode, Power 1 and Power…
1.3.6.1.4.1.43356.2.1.2.6.3.1.5ColumnmimosaChannelCenterFreqread-onlycurrentSpecifies the center frequency of the channel used on the link. In all modes, the center frequency represents the absolute center of the selected channel width…
1.3.6.1.4.1.43356.2.1.2.6.4ScalarmimosaAntennaGainread-onlycurrentThe antenna gain on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.5ScalarmimosaTotalTxPowerread-onlycurrentThe total transmit power for all the channels on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.6ScalarmimosaTotalRxPowerread-onlycurrentThe total receive power for all the channels on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.7ScalarmimosaTargetSignalStrengthread-onlycurrentThe calculated target receive signal strength based on device coordinates and settings.
1.3.6.1.4.1.43356.2.1.2.7NodemimosaPerfInfo
1.3.6.1.4.1.43356.2.1.2.7.1ScalarmimosaPhyTxRateread-onlycurrentThe transmit packet rate at the physical level over a 5 second interval.
1.3.6.1.4.1.43356.2.1.2.7.2ScalarmimosaPhyRxRateread-onlycurrentThe receive packet rate at the physical level over a 5 second interval.
1.3.6.1.4.1.43356.2.1.2.7.3ScalarmimosaPerTxRateread-onlycurrentThe trasnmit Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
1.3.6.1.4.1.43356.2.1.2.7.4ScalarmimosaPerRxRateread-onlycurrentThe receive Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
1.3.6.1.4.1.43356.2.1.2.8NodemimosaServices
1.3.6.1.4.1.43356.2.1.2.8.1ScalarmimosaHttpsEnabledread-onlycurrentSpecifies whether HTTPS is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.2ScalarmimosaMgmtVlanEnabledread-onlycurrentSpecifies whether the Management VLAN is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.3ScalarmimosaMgmtCloudEnabledread-onlycurrentSpecifies whether the Management Cloud is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.4ScalarmimosaRestMgmtEnabledread-onlycurrentSpecifies whether the REST management is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.5ScalarmimosaPingWatchdogEnabledread-onlycurrentSpecifies whether the IP Ping watchdog is enabled on the Mimosa device. This is used to reset the device if a configured IP address is not reached in certain n…
1.3.6.1.4.1.43356.2.1.2.8.6ScalarmimosaSyslogEnabledread-onlycurrentSpecifies whether the Syslog client is enabled on the Mimosa device. Syslog client sends the log messages to configured syslog server.
1.3.6.1.4.1.43356.2.1.2.8.7ScalarmimosaNtpModeread-onlycurrentSpecifies whether the NTP client is configured to use standard servers from NIST, NTP organizations or custom NTP server.
1.3.6.1.4.1.43356.2.1.2.8.8ScalarmimosaNtpServerread-onlycurrentSpecifies the name or address of the custom NTP server.
1.3.6.1.4.1.43356.2.4.1IdentitymimosaB5ModuleMimosa device MIB definitions
Type Definitions
NameSyntaxStatusDescription
DecimalFiveInteger32currentFixed point, five decimals
DecimalOneInteger32currentFixed point, one decimal
DecimalTwoInteger32currentFixed point, two decimals
MIB Viewer