MITEL-IPFILTER-MIB
46 objects
The MITEL IP MIB module.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | NOTIFICATION-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1027 | Nodemitel | |||
| 1.3.6.1.4.1.1027.1 | NodemitelIdentification | |||
| 1.3.6.1.4.1.1027.1.2 | NodemitelIdCallServers | |||
| 1.3.6.1.4.1.1027.1.2.4 | NodemitelIdCsIpera1000 | |||
| 1.3.6.1.4.1.1027.1.2.4.0 | GroupmitelIpera1000Notifications | current | Call Server Ipera 1000 Notifications. | |
| 1.3.6.1.4.1.1027.1.2.4.0.402 | NotificationmitelAccResTableTrapped | current | The mitelAccResTableTrapped trap indicates that a datagram has matched a mitelFltGrpAccessRestrictEntry that has the mitelAccResTableTrap enabled. | |
| 1.3.6.1.4.1.1027.4 | NodemitelProprietary | |||
| 1.3.6.1.4.1.1027.4.8 | NodemitelPropIpNetworking | |||
| 1.3.6.1.4.1.1027.4.8.1 | NodemitelIpNetRouter | |||
| 1.3.6.1.4.1.1027.4.8.1.1 | NodemitelRouterIpGroup | |||
| 1.3.6.1.4.1.1027.4.8.1.1.1 | IdentitymitelIpGrpFilterGroup | The MITEL IP MIB module. | ||
| 1.3.6.1.4.1.1027.4.8.1.1.1.1 | ScalarmitelFltGrpAccessRestrictEnable | read-write | current | This object indicates if the IP Access Restriction table is being used to filter or forward packets. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.2 | TablemitelFltGrpLogicalTable | not-accessible | current | A table containing information about logical IP LAN destinations. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.2.1 | RowmitelFltGrpLogicalEntry | not-accessible | current | Each entry of this table contains information about a specific logical interface toa local area network. Each logical LAN can support routing or bridging funct… |
| 1.3.6.1.4.1.1027.4.8.1.1.1.2.1.1 | ColumnmitelLogTableAccessDef | read-write | current | This object indicates what default access rights will apply to IP packets that do not match any of the access restrictions. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.2.1.2 | ColumnmitelLogTableAllowSrcRouting | read-write | current | This indicates whether IP datagrams received on this interface and containing a source route option are to be discarded or accepted. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3 | TablemitelFltGrpAccessRestrictTable | not-accessible | current | The IP Access REstriction configuration table. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1 | RowmitelFltGrpAccessRestrictEntry | not-accessible | current | Contains information about a single IP Access filter. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.1 | ColumnmitelAccResTableIfIndex | read-only | current | Identifies the destination interface to which this filter apply. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.2 | ColumnmitelAccResTableOrder | read-only | current | Specifies the order that the filters on a destination are searched. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.3 | ColumnmitelAccResTableType | read-write | current | This object indicates what action should be taken when a match on this entry has occurred. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.4 | ColumnmitelAccResTableSrcAddrFrom | read-write | current | Defines the lower bound of the source IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.… |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.5 | ColumnmitelAccResTableSrcAddrTo | read-write | current | Defines the upper bound of the source IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.… |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.6 | ColumnmitelAccResTableSrcAddrOutsideRange | read-write | current | This indicates whether action is taken on values outside of the source IP address range or within that range. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.7 | ColumnmitelAccResTableDstAddrFrom | read-write | current | Defines the lower bound of the destination IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.25… |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.8 | ColumnmitelAccResTableDstAddrTo | read-write | current | Defines the upper bound of the destination IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.25… |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.9 | ColumnmitelAccResTableDstAddrOutsideRange | read-write | current | This indicates whether action is taken on values outside of the destination IP address range or within that range. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.10 | ColumnmitelAccResTableProtocolFrom | read-write | current | Defines the lower bound of the protocol ID range. When determining protocol ID ranges, these four values are sequential: 254, 255, 0, and 1. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.11 | ColumnmitelAccResTableProtocolTo | read-write | current | Defines the upper bound of the protocol ID range. When determining protocol ID ranges, these four values are sequential: 254, 255, 0, and 1. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.12 | ColumnmitelAccResTableProtocolOutsideRange | read-write | current | This indicates whether action is taken on values outside of the protocol ID range or within that range. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.13 | ColumnmitelAccResTableSrcPortFrom | read-write | current | Defines the lower bound of the source port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.14 | ColumnmitelAccResTableSrcPortTo | read-write | current | Defines the upper bound of the source port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.15 | ColumnmitelAccResTableSrcPortOutsideRange | read-write | current | This indicates whether action is taken on values outside of the source port number range or within that range. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.16 | ColumnmitelAccResTableDstPortFrom | read-write | current | Defines the lower bound of the destination port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.17 | ColumnmitelAccResTableDstPortTo | read-write | current | Defines the upper bound of the destination port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.18 | ColumnmitelAccResTableDstPortOutsideRange | read-write | current | This indicates whether action is taken on values outside of the destination port number range or within that range. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.19 | ColumnmitelAccResTableTcpSyn | read-write | current | TCP header, synchronize sequence numbers flag. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.20 | ColumnmitelAccResTableTcpAck | read-write | current | TCP header, acknowledgment flag. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.21 | ColumnmitelAccResTableTcpFin | read-write | current | TCP header, finish flag. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.22 | ColumnmitelAccResTableTcpRst | read-write | current | TCP header, reset flag. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.23 | ColumnmitelAccResTableMatchIn | read-write | current | Indicates whether the filter applies to datagrams received on the interface. Normally, either mitelAccResTableMatchIn or mitelAccResTableMatchOut should be ena… |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.24 | ColumnmitelAccResTableMatchOut | read-write | current | Indicates whether the filter applies to datagrams transmitted on the interface. Normally, either mitelAccResTableMatchIn or mitelAccResTableMatchOut should be … |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.25 | ColumnmitelAccResTableLog | read-write | current | Controls whether a log message is to be produced each time a datagram matches the filter. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.26 | ColumnmitelAccResTableTrap | read-write | current | Controls the generation of SNMP trap. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.27 | ColumnmitelAccResTableStatus | read-create | current | The current status of this entry. |
| 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.28 | ColumnmitelAccResTableCount | read-only | current | Records the number of datagrams that matched this instance. |