MITEL-LOGICAL-MIB
41 objects
The MITEL Logical MIB module.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1027 | Nodemitel | |||
| 1.3.6.1.4.1.1027.1 | NodemitelIdentification | |||
| 1.3.6.1.4.1.1027.1.2 | NodemitelIdCallServers | |||
| 1.3.6.1.4.1.1027.1.2.4 | NodemitelIdCsIpera1000 | |||
| 1.3.6.1.4.1.1027.1.2.4.0 | GroupmitelIpera1000Notifications | current | Notifications for Call Server IPera 1000. | |
| 1.3.6.1.4.1.1027.1.2.4.0.403 | NotificationmitelWanRetryThreshold | current | The mitelWanRetryThreshold trap is generated by the router whenever the maximum number of retries have been exhausted when attempting to contact a remote site … | |
| 1.3.6.1.4.1.1027.4 | NodemitelProprietary | |||
| 1.3.6.1.4.1.1027.4.8 | NodemitelPropIpNetworking | |||
| 1.3.6.1.4.1.1027.4.8.1 | NodemitelIpNetRouter | |||
| 1.3.6.1.4.1.1027.4.8.1.4 | IdentitymitelRouterLogicalGroup | The MITEL Logical MIB module. | ||
| 1.3.6.1.4.1.1027.4.8.1.4.1 | TablemitelLogGrpLogicalTable | not-accessible | current | A table containing information about logical LAN destinations. |
| 1.3.6.1.4.1.1027.4.8.1.4.1.1 | RowmitelLogGrpLogicalEntry | not-accessible | current | Each entry of this table contains information about a specific logical interface to a local area network. Each logical LAN can support routing functions, these… |
| 1.3.6.1.4.1.1027.4.8.1.4.1.1.1 | ColumnmitelLogicalTblIndex | read-only | current | This object identifies the instance of this entry in the table. |
| 1.3.6.1.4.1.1027.4.8.1.4.1.1.2 | ColumnmitelLogicalTblDestName | read-write | current | The Ascii string associated with this logical destination LAN. Default is Net N (N is mitelLogicalTblIndex). |
| 1.3.6.1.4.1.1027.4.8.1.4.1.1.3 | ColumnmitelLogicalTblType | read-only | current | This object determines whether this network interface is locally connected to a LAN or is connected to a LAN via a WAN. If this object is set to local(1) then … |
| 1.3.6.1.4.1.1027.4.8.1.4.1.1.4 | ColumnmitelLogicalTblAdminStatus | read-write | current | The current desired state of this sub-layer. Default is down. |
| 1.3.6.1.4.1.1027.4.8.1.4.2 | TablemitelLogGrpLogicalWanTable | not-accessible | current | A table containing configuration parameters for wide area network connections to logical LAN destinations that are accessible via interfaces. Each entry is log… |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1 | RowmitelLogGrpLogicalWanEntry | not-accessible | current | Each entry of this table contains information about a specific logical interface to a REMOTELY connected local area network. The instance of mitelLogicalTblInd… |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.1 | ColumnmitelLogWanTblCmprsn | read-write | current | This object indicates whether or not this interface is to perform data compression. Default is none. |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.2 | ColumnmitelLogWanTblCmprsnStatus | read-only | current | This object describes the type of compression used on this destination. |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.3 | ColumnmitelLogWanTblEncryptn | read-write | current | This object describes whether or not PPP encryption is proposed to the peer. Default is disabled. |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.4 | ColumnmitelLogWanTblBackupOvrflow | read-write | current | This object determines if this interface is to attempt to bring up another link to the same destination if the traffic over the primary link exceeds a pre-dete… |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.5 | ColumnmitelLogWanTblThshld | read-write | current | This object determines the transmit threshold which when exceeded will cause an attempt to bring up another path. The returned value of this object has no mean… |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.6 | ColumnmitelLogWanTblConnTimer | read-write | current | When threshold overflow is enabled this object determines the amount of time in seconds that the average threshold must be exceeded (or below) before another l… |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.7 | ColumnmitelLogWanTblDiscTimer | read-write | current | The time a non-permanent link will remain connected without traffic. Default is 30. |
| 1.3.6.1.4.1.1027.4.8.1.4.2.1.8 | ColumnmitelLogWanTblProtocolType | read-write | current | The protocol type that this destination is over. Default is ppp. |
| 1.3.6.1.4.1.1027.4.8.1.4.3 | TablemitelLogGrpLogicalWanPortTable | not-accessible | current | This configuration table identifies the characteristics of each potential transportation pipe to a remote site. Each entry in this table is associated with an … |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1 | RowmitelLogGrpLogicalWanPortEntry | not-accessible | current | Each entry of this table contains information about a single WAN resource used by a logical interface to a remote local area network. The instance of mitelLogi… |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.1 | ColumnmitelLogWanPortTblIndex | read-only | current | Identifies the port index associated with this entry. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.2 | ColumnmitelLogWanPortTblWanType | read-write | current | Indicates whether or not this link is to be used as a permanent or ondemand link. Default is ondemand |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.3 | ColumnmitelLogWanPortTblTransType | read-write | current | The transport type that this destination is over. Default is HDLC. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.4 | ColumnmitelLogWanPortTblRetry | read-write | current | Determines the retry count for dial up WAN circuits. Default is 10. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.5 | ColumnmitelLogWanPortTblRetryPeriod | read-write | current | Determines the retry period in seconds for dial up WAN circuits. Default is 10 seconds. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.6 | ColumnmitelLogWanPortTblPrepend | read-write | current | Indicates in most cases an Ascii string that will be prepended to the destination address. Default is NULL. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.7 | ColumnmitelLogWanPortTblDestAddr | read-write | current | Indicates the destination address that this interface will call (ie: phone number). Default is NULL. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.8 | ColumnmitelLogWanPortTblNextDestAddr | read-write | current | Indicates the next destination address that this interface will call (ie: phone number). Default is NULL. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.9 | ColumnmitelLogWanPortTblChId | read-write | current | This object is a unique identifier for this network channel. e.g. DLCI for frame-relay. The value must be within the defined range or if not used the DEFAULT v… |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.10 | ColumnmitelLogWanPortTblDialback | read-write | current | Enables/disables dialback option. If enabled the system will drop the link and then dial the user back using the configured dial string or a dial string report… |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.11 | ColumnmitelLogWanPortTblAdminStatus | read-write | current | The current desired state of this sub-layer. Default is down. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.12 | ColumnmitelLogWanPortTblOperStatus | read-only | current | The current active state of this sub-layer. |
| 1.3.6.1.4.1.1027.4.8.1.4.3.1.13 | ColumnmitelLogWanPortTblStatus | read-create | current | The current status of this entry. |