MIB Viewer

MITEL-PPPGROUP-MIB

30 objects
The MITEL PPP MIB module.
Imported Objects
SNMPv2-SMIenterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.1027Nodemitel
1.3.6.1.4.1.1027.4NodemitelProprietary
1.3.6.1.4.1.1027.4.8NodemitelPropIpNetworking
1.3.6.1.4.1.1027.4.8.1NodemitelIpNetRouter
1.3.6.1.4.1.1027.4.8.1.2IdentitymitelRouterPppGroupThe MITEL PPP MIB module.
1.3.6.1.4.1.1027.4.8.1.2.1NodemitelPppGrpGlobalGroup
1.3.6.1.4.1.1027.4.8.1.2.1.1ScalarmitelGblGrpNegotiateFirstread-writecurrentThis attribute defines which PPP authentication protocol is negotiated first on incoming call. DEFAULT = chap
1.3.6.1.4.1.1027.4.8.1.2.1.2ScalarmitelGblGrpDynamicIpAddrread-writecurrentThis attribute defines the start address of the dynamic addres pool.
1.3.6.1.4.1.1027.4.8.1.2.1.3ScalarmitelGblGrpNumDynamicIpAddrread-writecurrentThis attribute defines the number of dynamic IP addresses in the pool.
1.3.6.1.4.1.1027.4.8.1.2.1.4ScalarmitelGblGrpDynamicIpAdrrHoldoffread-writecurrentThis attribute defines the time in seconds before the same IP address can be reused after a call has been disconnected.
1.3.6.1.4.1.1027.4.8.1.2.1.5ScalarmitelGblGrpRemDnsIpAddrHandlingread-writecurrentThis attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept. Override has been superce…
1.3.6.1.4.1.1027.4.8.1.2.1.6ScalarmitelGblGrpPrimaryWinsServerIpAddrread-writecurrentThis attribute defines the Primary WINS server IP address of your Network.
1.3.6.1.4.1.1027.4.8.1.2.1.7ScalarmitelGblGrpSecondaryWinsServerIpAddrread-writecurrentThis attribute defines the Secondary WINS server IP address of your Network.
1.3.6.1.4.1.1027.4.8.1.2.2TablemitelPppGrpRemoteConfigTablenot-accessiblecurrentThis table contains objects that pertain to the management of remote LANs that use the PPP Internet standard link protocol.
1.3.6.1.4.1.1027.4.8.1.2.2.1RowmitelPppGrpRemoteConfigEntrynot-accessiblecurrentA default entry at conceptual row zero does exist in this table. The default entry can be used to specify the PPP authentication protocol only.
1.3.6.1.4.1.1027.4.8.1.2.2.1.1ColumnmitelRmtCfgTableIndexread-onlycurrentThis object uniquely identifies this object
1.3.6.1.4.1.1027.4.8.1.2.2.1.2ColumnmitelRmtCfgTableIpAddrHandlingread-writecurrentThis attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept.
1.3.6.1.4.1.1027.4.8.1.2.2.1.3ColumnmitelRmtCfgTableRemIpAddrread-writecurrentThe IP address to assign to remote if mitelRmtCfgTableIPAddrHandling is set to assign(3)
1.3.6.1.4.1.1027.4.8.1.2.2.1.4ColumnmitelRmtCfgTableStatusread-createcurrentThe current status of this entry.
1.3.6.1.4.1.1027.4.8.1.2.2.1.5ColumnmitelRmtCfgTablePppModeread-writecurrentThe mode PPP will be using for the given destination.
1.3.6.1.4.1.1027.4.8.1.2.3TablemitelPppGrpPppOverEthernetTablenot-accessiblecurrentTable containing the configuration items needed by the PPPoE stack.
1.3.6.1.4.1.1027.4.8.1.2.3.1RowmitelPppGrpPppOverEthernetEntrynot-accessiblecurrentPPPoE information
1.3.6.1.4.1.1027.4.8.1.2.3.1.1ColumnmitelPppOEthTableIndexread-writecurrentUnique Identifier for an entry in PPP over Ethernet Table.
1.3.6.1.4.1.1027.4.8.1.2.3.1.2ColumnmitelPppOEthTableEnabledread-writecurrentIs this PPPoE instance enabled or not.
1.3.6.1.4.1.1027.4.8.1.2.3.1.3ColumnmitelPppOEthTablePacketTimeoutread-writecurrentThe time to wait, in seconds, for a valid response to a discovery packet before resending it. Warning: this value is doubled ever time a packet is resent.
1.3.6.1.4.1.1027.4.8.1.2.3.1.4ColumnmitelPppOEthTablePacketRetriesread-writecurrentThe number of times to resend discovery packets before giving up on the negotiation.
1.3.6.1.4.1.1027.4.8.1.2.3.1.5ColumnmitelPppOEthTableTotalRetriesread-writecurrentThe RFC states that failure to receive a valid PADS packet should restart the negotiation. This count stops the system retrying indefinitely on duff PADS packe…
1.3.6.1.4.1.1027.4.8.1.2.3.1.6ColumnmitelPppOEthTableServiceNameread-writecurrentThe service we wish to request from the remote access concentrator. Examples of the use of the service name are to indicate an ISP or a class or quality of ser…
1.3.6.1.4.1.1027.4.8.1.2.3.1.7ColumnmitelPppOEthTableACNameread-writecurrentDescription of the remote access concentrator we wish to connect to. An empty string indicates no preference.
1.3.6.1.4.1.1027.4.8.1.2.3.1.8ColumnmitelPppOEthTableStatusread-createcurrentThe entry's row status.