MOXA-EDS508-MIB
243 objects
The MIB module for Moxa EDS-508 series specific information.
Imported Objects
| SNMPv2-SMI | enterprises IpAddress OBJECT-TYPE |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8691 | Nodemoxa | |||
| 1.3.6.1.4.1.8691.7 | NodeindustrialEthernet | |||
| 1.3.6.1.4.1.8691.7.1 | IdentityetherDeviceSwitch | The MIB module for Moxa EDS-508 series specific information. | ||
| 1.3.6.1.4.1.8691.7.1.1 | ScalarportsNumber | read-only | current | Total Ports. |
| 1.3.6.1.4.1.8691.7.1.2 | ScalarswitchModel | read-only | current | The switch model. |
| 1.3.6.1.4.1.8691.7.1.4 | ScalarfirmwareVersion | read-only | current | The firmware version. |
| 1.3.6.1.4.1.8691.7.1.5 | ScalarenableWebConfig | read-write | current | This enable the Web. configuration function. |
| 1.3.6.1.4.1.8691.7.1.6 | ScalarenableTelnetConsole | read-write | current | This enable telnet console. |
| 1.3.6.1.4.1.8691.7.1.7 | ScalarlineSwapRecovery | read-write | current | This enable line-swap-fast-recovery function. |
| 1.3.6.1.4.1.8691.7.1.8 | NodenetworkSetting | |||
| 1.3.6.1.4.1.8691.7.1.8.1 | ScalarswitchIpAddr | read-only | current | The IP Address of this switch. |
| 1.3.6.1.4.1.8691.7.1.8.2 | ScalarswitchIpMask | read-only | current | The netmask of this switch. |
| 1.3.6.1.4.1.8691.7.1.8.3 | ScalardefaultGateway | read-only | current | The default gateway of this switch. |
| 1.3.6.1.4.1.8691.7.1.8.4 | ScalarenableAutoIpConfig | read-write | current | This enable the automatic IP address configuration function. |
| 1.3.6.1.4.1.8691.7.1.8.5 | ScalardnsServer1IpAddr | read-write | current | The first DNS server's IP address |
| 1.3.6.1.4.1.8691.7.1.8.6 | ScalarsnmpCommunityName | read-only | current | The SNMP read and trap community name |
| 1.3.6.1.4.1.8691.7.1.8.7 | ScalartrapServerAddr | read-write | current | The IP address/Domain name of SNMP trap server |
| 1.3.6.1.4.1.8691.7.1.8.8 | ScalardnsServer2IpAddr | read-write | current | The second DNS server's IP address |
| 1.3.6.1.4.1.8691.7.1.9 | NodeportSetting | |||
| 1.3.6.1.4.1.8691.7.1.9.1 | TableportTable | not-accessible | current | The port table. |
| 1.3.6.1.4.1.8691.7.1.9.1.1 | RowportEntry | not-accessible | current | The port entry. |
| 1.3.6.1.4.1.8691.7.1.9.1.1.1 | ColumnportIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.8691.7.1.9.1.1.2 | ColumnportEnable | read-write | current | This enable the port. |
| 1.3.6.1.4.1.8691.7.1.9.1.1.3 | ColumnportSpeed | read-write | current | The port speed and duplex. |
| 1.3.6.1.4.1.8691.7.1.9.1.1.4 | ColumnportMDI | read-write | current | The port MDI/MDIX. |
| 1.3.6.1.4.1.8691.7.1.9.1.1.5 | ColumnportFDXFlowCtrl | read-write | current | The port FDX Flow Control |
| 1.3.6.1.4.1.8691.7.1.9.1.1.6 | ColumnportName | read-write | current | The port Name |
| 1.3.6.1.4.1.8691.7.1.9.1.1.7 | ColumnportTrunkingGroup | read-write | current | The trunking group number which this port belongs to. |
| 1.3.6.1.4.1.8691.7.1.10 | NodeconfigChangeTrap | The configuration has been changed. | ||
| 1.3.6.1.4.1.8691.7.1.10 | Nodemonitor | |||
| 1.3.6.1.4.1.8691.7.1.10.1 | Scalarpower1InputStatus | read-only | current | The status of the first power input. |
| 1.3.6.1.4.1.8691.7.1.10.2 | Scalarpower2InputStatus | read-only | current | The status of the second power input. |
| 1.3.6.1.4.1.8691.7.1.10.3 | TablemonitorPortTable | not-accessible | current | The port table of monitor function. |
| 1.3.6.1.4.1.8691.7.1.10.3.1 | RowmonitorPortEntry | not-accessible | current | The port table entry of monitor function. |
| 1.3.6.1.4.1.8691.7.1.10.3.1.1 | ColumnmonitorPortIndex | read-only | current | The port index of monitor function. |
| 1.3.6.1.4.1.8691.7.1.10.3.1.2 | ColumnmonitorLinkStatus | read-only | current | The port link status. |
| 1.3.6.1.4.1.8691.7.1.10.3.1.3 | ColumnmonitorSpeed | read-only | current | The port speed and duplex status. |
| 1.3.6.1.4.1.8691.7.1.10.3.1.4 | ColumnmonitorAutoMDI | read-only | current | The port MDI/MDIX status. |
| 1.3.6.1.4.1.8691.7.1.10.3.1.5 | ColumnmonitorTraffic | read-only | current | The trafic loading percentage of port. |
| 1.3.6.1.4.1.8691.7.1.10.3.1.6 | ColumnmonitorFDXFlowCtrl | read-only | current | The Full-Duplex flow control status |
| 1.3.6.1.4.1.8691.7.1.10.4 | TablemonitorDiTable | not-accessible | current | The DI table of monitor function. |
| 1.3.6.1.4.1.8691.7.1.10.4.1 | RowmonitorDiEntry | not-accessible | current | The DI table entry of monitor function. |
| 1.3.6.1.4.1.8691.7.1.10.4.1.1 | ColumndiIndex | read-only | current | The DI index of monitor function |
| 1.3.6.1.4.1.8691.7.1.10.4.1.2 | ColumndiInputStatus | read-only | current | The DI input status. |
| 1.3.6.1.4.1.8691.7.1.11 | NodeemailWarning | |||
| 1.3.6.1.4.1.8691.7.1.11 | NodepowerOn2OffTrap | The power input fail. | ||
| 1.3.6.1.4.1.8691.7.1.11.1 | NodeemailService | |||
| 1.3.6.1.4.1.8691.7.1.11.1.1 | ScalaremailWarningMailServer | read-write | current | The email server's Ip Address/Domain name of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.1.2 | ScalaremailWarningFirstEmailAddr | read-write | current | The first email address of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.1.3 | ScalaremailWarningSecondEmailAddr | read-write | current | The second email address of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.1.4 | ScalaremailWarningThirdEmailAddr | read-write | current | The third email address of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.1.5 | ScalaremailWarningFourthEmailAddr | read-write | current | The fourth email address of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.2 | NodeemailWarningEventType | |||
| 1.3.6.1.4.1.8691.7.1.11.2.1 | ScalaremailWarningEventServerColdStart | read-write | current | The switch cold start event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.2.2 | ScalaremailWarningEventServerWarmStart | read-write | current | The switch warm start event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.2.3 | ScalaremailWarningEventConfigChange | read-write | current | The configuration changed event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.2.4 | ScalaremailWarningEventPowerOn2Off | read-write | current | The power on event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.2.5 | ScalaremailWarningEventPowerOff2On | read-write | current | The power off event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.2.6 | ScalaremailWarningEventAuthFail | read-write | current | The authentication fail event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.2.7 | ScalaremailWarningEventCommRedundancyTopologyChanged | read-write | current | The comm. redundancy topology changed event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.3 | TableemailWarningEventPortTable | not-accessible | current | The port table of the email warning event. |
| 1.3.6.1.4.1.8691.7.1.11.3.1 | RowemailWarningEventPortEntry | not-accessible | current | The port table entry of the email warning event. |
| 1.3.6.1.4.1.8691.7.1.11.3.1.1 | ColumnemailWarningPortIndex | read-only | current | The port table index of the email warning event. |
| 1.3.6.1.4.1.8691.7.1.11.3.1.2 | ColumnemailWarningEventPortLinkOn | read-write | current | The port link on event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.3.1.3 | ColumnemailWarningEventPortLinkOff | read-write | current | The port link off event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.3.1.4 | ColumnemailWarningEventPortTrafficOverload | read-write | current | The port's traffic overloading event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.11.3.1.5 | ColumnemailWarningEventPortTrafficThreshold | read-write | current | The port's traffic threshold of the overloading event. |
| 1.3.6.1.4.1.8691.7.1.11.3.1.6 | ColumnemailWarningEventPortTrafficDuration | read-write | current | The port's traffic duration of the overloading event. |
| 1.3.6.1.4.1.8691.7.1.11.4 | TableemailWarningEventDiTable | not-accessible | current | The DI table of the email warning event. |
| 1.3.6.1.4.1.8691.7.1.11.4.1 | RowemailWarningEventDiEntry | not-accessible | current | The DI table entry of the email warning event. |
| 1.3.6.1.4.1.8691.7.1.11.4.1.1 | ColumnemailWarningEventDiInputOn2Off | read-write | current | The DI input off event of email warning function . |
| 1.3.6.1.4.1.8691.7.1.11.4.1.2 | ColumnemailWarningEventDiInputOff2On | read-write | current | The DI input on event of email warning function. |
| 1.3.6.1.4.1.8691.7.1.12 | NodepowerOff2OnTrap | The power input ok. | ||
| 1.3.6.1.4.1.8691.7.1.12 | NodesetDeviceIp | |||
| 1.3.6.1.4.1.8691.7.1.12.1 | TablesetDevIpTable | not-accessible | current | The set devvice IP table. |
| 1.3.6.1.4.1.8691.7.1.12.1.1 | RowsetDevIpEntry | not-accessible | current | The set devvice IP table entry. |
| 1.3.6.1.4.1.8691.7.1.12.1.1.1 | ColumnsetDevIpIndex | read-only | current | The set devvice IP index. |
| 1.3.6.1.4.1.8691.7.1.12.1.1.2 | ColumnsetDevIpCurrentIpofDevice | read-only | current | The current IP address of connected to this port. |
| 1.3.6.1.4.1.8691.7.1.12.1.1.3 | ColumnsetDevIpPresentBy | read-only | current | The protocol used that assigning IP to the device. |
| 1.3.6.1.4.1.8691.7.1.12.1.1.4 | ColumnsetDevIpDedicatedIp | read-write | current | The IP address when assign to the device connected to this port. |
| 1.3.6.1.4.1.8691.7.1.13 | Nodemirroring | |||
| 1.3.6.1.4.1.8691.7.1.13 | NodetrafficOverloadTrap | The ethernet port's traffic loading exceeds the pre-defined value. | ||
| 1.3.6.1.4.1.8691.7.1.13.1 | ScalartargetPort | read-write | current | The mirrored port of mirroring function. |
| 1.3.6.1.4.1.8691.7.1.13.2 | ScalarmirroringPort | read-write | current | The mirroring port of mirroring function. |
| 1.3.6.1.4.1.8691.7.1.13.3 | ScalarmonitorDirection | read-write | current | The traffic direction of mirroring function. |
| 1.3.6.1.4.1.8691.7.1.14 | NoderedundancyTopologyChangedTrap | The redundancy topology has been changed. | ||
| 1.3.6.1.4.1.8691.7.1.15 | NodeturboRingCouplingPortChangedTrap | The coupling path of Turbo Ring has been changed. | ||
| 1.3.6.1.4.1.8691.7.1.16 | NodecommRedundancy | |||
| 1.3.6.1.4.1.8691.7.1.16 | NodeturboRingMasterChangedTrap | The master of Turbo Ring has been changed. | ||
| 1.3.6.1.4.1.8691.7.1.16.1 | ScalarprotocolOfRedundancySetup | read-write | current | This set the redundancy protocol of this switch. |
| 1.3.6.1.4.1.8691.7.1.16.2 | NodeturboRing | |||
| 1.3.6.1.4.1.8691.7.1.16.2.1 | ScalarturboRingMaster | read-only | current | Is this a Master or Slave. |
| 1.3.6.1.4.1.8691.7.1.16.2.2 | ScalarturboRingMasterSetup | read-write | current | Set this to be Master. |
| 1.3.6.1.4.1.8691.7.1.16.2.3 | TableturboRingPortTable | not-accessible | current | Turbo Ring Port Table. |
| 1.3.6.1.4.1.8691.7.1.16.2.3.1 | RowturboRingPortEntry | not-accessible | current | Turbo Ring Port Entry. |
| 1.3.6.1.4.1.8691.7.1.16.2.3.1.1 | ColumnturboRingPortIndex | read-only | current | Turbo Ring Port Index. |
| 1.3.6.1.4.1.8691.7.1.16.2.3.1.2 | ColumnturboRingPortStatus | read-only | current | Turbo Ring Port Status. |
| 1.3.6.1.4.1.8691.7.1.16.2.3.1.3 | ColumnturboRingPortDesignatedBridge | read-only | mandatory | The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.8691.7.1.16.2.3.1.4 | ColumnturboRingPortDesignatedPort | read-only | mandatory | The Port Number of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.8691.7.1.16.2.6 | ScalarturboRingDesignatedMaster | read-only | mandatory | The MAC address of the bridge which is the Master of the TURBO RING. |
| 1.3.6.1.4.1.8691.7.1.16.2.7 | ScalarturboRingRdntPort1 | read-write | current | The port number of 1st Redundant Port on the TURBO RING. |
| 1.3.6.1.4.1.8691.7.1.16.2.8 | ScalarturboRingRdntPort2 | read-write | current | The port number of 2nd Redundant Port on the TURBO RING. |
| 1.3.6.1.4.1.8691.7.1.16.2.9 | ScalarturboRingEnableCoupling | read-write | current | This enable the ring coupling function. |
| 1.3.6.1.4.1.8691.7.1.16.2.10 | ScalarturboRingCouplingPort | read-write | current | The coupling port of ring coupling function. |
| 1.3.6.1.4.1.8691.7.1.16.2.11 | ScalarturboRingCouplingPortStatus | read-only | current | The coupling port status of ring coupling function. |
| 1.3.6.1.4.1.8691.7.1.16.2.12 | ScalarturboRingControlPort | read-write | current | The control port of ring coupling function. |
| 1.3.6.1.4.1.8691.7.1.16.2.13 | ScalarturboRingControlPortStatus | read-only | current | The control port status of ring coupling function. |
| 1.3.6.1.4.1.8691.7.1.16.2.14 | ScalarturboRingBrokenStatus | read-only | current | Turbo Ring broken display. |
| 1.3.6.1.4.1.8691.7.1.16.3 | NodespanningTree | |||
| 1.3.6.1.4.1.8691.7.1.16.3.1 | ScalarspanningTreeRoot | read-only | current | The root of spanning tree. |
| 1.3.6.1.4.1.8691.7.1.16.3.2 | ScalarspanningTreeBridgePriority | read-write | current | The bridge priority of spanning tree protocol. |
| 1.3.6.1.4.1.8691.7.1.16.3.3 | ScalarspanningTreeHelloTime | read-write | current | The hello time of spanning tree protocol. |
| 1.3.6.1.4.1.8691.7.1.16.3.4 | ScalarspanningTreeMaxAge | read-write | current | The max. age of spanning tree protocol. |
| 1.3.6.1.4.1.8691.7.1.16.3.5 | ScalarspanningTreeForwardingDelay | read-write | current | Tje forwarding delay of spanning tree protocol. |
| 1.3.6.1.4.1.8691.7.1.16.3.6 | TablespanningTreeTable | not-accessible | current | The spanning tree table. |
| 1.3.6.1.4.1.8691.7.1.16.3.6.1 | RowspanningTreeEntry | not-accessible | current | The spanning tree port entry. |
| 1.3.6.1.4.1.8691.7.1.16.3.6.1.1 | ColumnspanningTreeIndex | read-only | current | The index of spanning tree table. |
| 1.3.6.1.4.1.8691.7.1.16.3.6.1.2 | ColumnenableSpanningTree | read-write | current | This enable of spanning tree protocol for this port. |
| 1.3.6.1.4.1.8691.7.1.16.3.6.1.3 | ColumnspanningTreePortPriority | read-write | current | The port priority of spanning tree protocol. |
| 1.3.6.1.4.1.8691.7.1.16.3.6.1.4 | ColumnspanningTreePortCost | read-write | current | The port cost of spanning tree protocol. |
| 1.3.6.1.4.1.8691.7.1.16.3.6.1.5 | ColumnspanningTreePortStatus | read-only | current | The port status of spanning tree protocol. |
| 1.3.6.1.4.1.8691.7.1.16.4 | ScalaractiveProtocolOfRedundancy | read-only | current | This shows the active redundancy protocol of this switch now. The none(0) stauts will be showed if only if the switch's redundancy protocol is set to spanning … |
| 1.3.6.1.4.1.8691.7.1.17 | NoderelayWarning | |||
| 1.3.6.1.4.1.8691.7.1.17.11 | TablerelayWarningTable | not-accessible | current | The relay warning table. |
| 1.3.6.1.4.1.8691.7.1.17.11.1 | RowrelayWarningEntry | not-accessible | current | Relay Warning Entry. |
| 1.3.6.1.4.1.8691.7.1.17.11.1.1 | ColumnrelayAlarmIndex | read-only | current | The Relay alarm index. |
| 1.3.6.1.4.1.8691.7.1.17.11.1.2 | ColumnrelayWarningRelayContact | read-only | current | The first Relay contact status. |
| 1.3.6.1.4.1.8691.7.1.17.11.1.3 | ColumnoverrideRelayWarningSetting | read-write | current | Override the relay warning setting. |
| 1.3.6.1.4.1.8691.7.1.17.11.1.4 | ColumnrelayWarningPower1Off | read-write | current | The relay contact will be opened while the first power input off. |
| 1.3.6.1.4.1.8691.7.1.17.11.1.5 | ColumnrelayWarningPower1OffStatus | read-only | current | The relay contact is opened as the first power input off.. |
| 1.3.6.1.4.1.8691.7.1.17.11.1.6 | ColumnrelayWarningPower2Off | read-write | current | The relay contact will be opened while the second power input off. |
| 1.3.6.1.4.1.8691.7.1.17.11.1.7 | ColumnrelayWarningPower2OffStatus | read-only | current | The relay contact is opened as the second power input off. |
| 1.3.6.1.4.1.8691.7.1.17.12 | TableportRelayWarningTable | not-accessible | current | The relay warning port table. |
| 1.3.6.1.4.1.8691.7.1.17.12.1 | RowportRelayWarningEntry | not-accessible | current | Port Relay Warning Entry. |
| 1.3.6.1.4.1.8691.7.1.17.12.1.1 | ColumnrelayWarningLinkChanged | read-write | current | The relay contact will be opened while this port's link status is changed. |
| 1.3.6.1.4.1.8691.7.1.17.12.1.2 | ColumnrelayWarningLinkChangedStatus | read-only | current | The relay contact is opened as this port's link status is changed. |
| 1.3.6.1.4.1.8691.7.1.17.12.1.3 | ColumnrelayWarningTrafficOverload | read-write | current | The relay contact will be opened while this port's traffic is overload. |
| 1.3.6.1.4.1.8691.7.1.17.12.1.4 | ColumnrelayWarningTrafficOverloadStatus | read-only | current | The relay contact is opened as this port's traffic is overload. |
| 1.3.6.1.4.1.8691.7.1.17.12.1.5 | ColumnrelayWarningTrafficThreshold | read-write | current | The threshold of the port traffic will be over loading. |
| 1.3.6.1.4.1.8691.7.1.17.12.1.6 | ColumnrelayWarningTrafficDuration | read-write | current | The duration of the port traffic will be over loading. |
| 1.3.6.1.4.1.8691.7.1.17.13 | TablediRelayWarningTable | not-accessible | current | The relay warning DI table. |
| 1.3.6.1.4.1.8691.7.1.17.13.1 | RowdiRelayWarningEntry | not-accessible | current | DI Relay Warning Entry. |
| 1.3.6.1.4.1.8691.7.1.17.13.1.1 | ColumnrelayWarningDiInputChanged | read-write | current | The relay contact will be opened while the DI input changed. |
| 1.3.6.1.4.1.8691.7.1.17.13.1.2 | ColumnrelayWarningDiInputChangedStatus | read-only | current | The relay contact is opened as the first DI input changed.. |
| 1.3.6.1.4.1.8691.7.1.18 | NodetrafficPrioritization | |||
| 1.3.6.1.4.1.8691.7.1.18.1 | NodeqosClassification | |||
| 1.3.6.1.4.1.8691.7.1.18.1.1 | ScalarqueuingMechanism | read-write | current | The queuing mechanism. |
| 1.3.6.1.4.1.8691.7.1.18.1.2 | TableqosPortTable | not-accessible | current | The QOS port table. |
| 1.3.6.1.4.1.8691.7.1.18.1.2.1 | RowqosPortEntry | not-accessible | current | The QOS Port Entry. |
| 1.3.6.1.4.1.8691.7.1.18.1.2.1.1 | ColumninspectTos | read-write | current | This enable the inspection of TOS field. |
| 1.3.6.1.4.1.8691.7.1.18.1.2.1.2 | ColumninspectCos | read-write | current | This enable the inspection of COS field. |
| 1.3.6.1.4.1.8691.7.1.18.1.2.1.3 | ColumndefaultPriority | read-write | current | The deault priority of the port. |
| 1.3.6.1.4.1.8691.7.1.18.2 | NodecosMapping | |||
| 1.3.6.1.4.1.8691.7.1.18.2.1 | TablecosMappingTable | not-accessible | current | The COS mapping table. |
| 1.3.6.1.4.1.8691.7.1.18.2.1.1 | RowcosMappingEntry | not-accessible | current | The COS mapping Entry. |
| 1.3.6.1.4.1.8691.7.1.18.2.1.1.1 | ColumncosTag | read-only | current | The cos tag of TOS field. |
| 1.3.6.1.4.1.8691.7.1.18.2.1.1.2 | ColumncosMappedPriority | read-write | current | The frame's priority corresponding to it's COS tag value. |
| 1.3.6.1.4.1.8691.7.1.18.3 | NodetosMapping | |||
| 1.3.6.1.4.1.8691.7.1.18.3.1 | TabletosMappingTable | not-accessible | current | The TOS mapping table. |
| 1.3.6.1.4.1.8691.7.1.18.3.1.1 | RowtosMappingEntry | not-accessible | current | TOS mapping Entry. |
| 1.3.6.1.4.1.8691.7.1.18.3.1.1.1 | ColumntosClass | read-only | current | The TOS class of TOS field. |
| 1.3.6.1.4.1.8691.7.1.18.3.1.1.2 | ColumntosMappedPriority | read-write | current | The frame's priority corresponding to it's TOS class value. |
| 1.3.6.1.4.1.8691.7.1.19 | Nodevlan | |||
| 1.3.6.1.4.1.8691.7.1.19.1 | TablevlanPortSettingTable | not-accessible | current | The valn seting table of ports. |
| 1.3.6.1.4.1.8691.7.1.19.1.1 | RowvlanPortSettingEntry | not-accessible | current | Port Setting Entry of VLAN. |
| 1.3.6.1.4.1.8691.7.1.19.1.1.1 | ColumnportVlanType | read-write | current | The vlan type of port. |
| 1.3.6.1.4.1.8691.7.1.19.1.1.2 | ColumnportDefaultVid | read-write | current | The PVID of port. |
| 1.3.6.1.4.1.8691.7.1.19.1.1.3 | ColumnportFixedVid | read-write | current | The fixed vids of (trunk) port. |
| 1.3.6.1.4.1.8691.7.1.19.1.1.4 | ColumnportForbiddenVid | read-write | current | The forbidden vids of (trunk)port. |
| 1.3.6.1.4.1.8691.7.1.19.2 | TablevlanTable | not-accessible | current | The VLAN table. |
| 1.3.6.1.4.1.8691.7.1.19.2.1 | RowvlanEntry | not-accessible | current | VLAN Entry. |
| 1.3.6.1.4.1.8691.7.1.19.2.1.1 | ColumnvlanId | read-only | current | The VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.2.1.2 | ColumnjoinedAccessPorts | read-only | current | The access ports that joined this VID. |
| 1.3.6.1.4.1.8691.7.1.19.2.1.3 | ColumnjoinedTrunkPorts | read-only | current | The trunk ports that joined this VID. |
| 1.3.6.1.4.1.8691.7.1.19.3 | NodeportVidSetTable | |||
| 1.3.6.1.4.1.8691.7.1.19.3.1 | Scalarport1DefaultVid | read-write | current | The Port 1 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.2 | Scalarport2DefaultVid | read-write | current | The Port 2 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.3 | Scalarport3DefaultVid | read-write | current | The Port 3 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.4 | Scalarport4DefaultVid | read-write | current | The Port 4 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.5 | Scalarport5DefaultVid | read-write | current | The Port 5 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.6 | Scalarport6DefaultVid | read-write | current | The Port 6 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.7 | Scalarport7DefaultVid | read-write | current | The Port 7 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.8 | Scalarport8DefaultVid | read-write | current | The Port 8 VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.9 | ScalarmanagementVlanId | read-write | current | The management VLAN id. |
| 1.3.6.1.4.1.8691.7.1.19.3.10 | ScalarpvidsAction | read-write | current | activate default vid of all ports if set to activate(1). |
| 1.3.6.1.4.1.8691.7.1.20 | NodemulticastFiltering | |||
| 1.3.6.1.4.1.8691.7.1.20.1 | NodeigmpSnooping | |||
| 1.3.6.1.4.1.8691.7.1.20.1.1 | ScalarquerierQueryInterval | read-write | current | This query interval of the querier function for this VLAN. |
| 1.3.6.1.4.1.8691.7.1.20.1.2 | TableigmpSnoopingSettingTable | not-accessible | current | The IGMP snooping setting table. |
| 1.3.6.1.4.1.8691.7.1.20.1.2.1 | RowigmpSnoopingSettingEntry | not-accessible | current | The IGMP snooping setting Entry. |
| 1.3.6.1.4.1.8691.7.1.20.1.2.1.1 | ColumnenableIgmpSnooping | read-write | current | This enable the IGMP snooping functon in this VLAN. |
| 1.3.6.1.4.1.8691.7.1.20.1.2.1.2 | ColumnenableQuerier | read-write | current | This enable the querier function for this VLAN. |
| 1.3.6.1.4.1.8691.7.1.20.1.2.1.3 | ColumnfixedMulticastRouterPorts | read-write | current | The ports that multicast-rouer exist. |
| 1.3.6.1.4.1.8691.7.1.20.1.2.1.4 | ColumnlearnedMulticastRouterPorts | read-only | current | The ports that multicast-rouer exist. |
| 1.3.6.1.4.1.8691.7.1.20.1.3 | TableigmpSnoopingMulticastGroupTable | not-accessible | current | The multicast group table by IGMP snooping function. |
| 1.3.6.1.4.1.8691.7.1.20.1.3.1 | RowigmpSnoopingMulticastGroupEntry | not-accessible | current | The multicast group entry by IGMP snooping function. |
| 1.3.6.1.4.1.8691.7.1.20.1.3.1.1 | ColumnigmpSnoopingIpGroup | read-only | current | The multicast IP group by IGMP snooping function. |
| 1.3.6.1.4.1.8691.7.1.20.1.3.1.2 | ColumnigmpSnoopingMacGroup | read-only | current | The multicast MAC group by IGMP snooping function. |
| 1.3.6.1.4.1.8691.7.1.20.1.3.1.3 | ColumnigmpSnoopingJoinedPorts | read-only | current | The ports that joined this multicast group. |
| 1.3.6.1.4.1.8691.7.1.20.1.4 | ScalarenableGlobalIgmpSnooping | read-write | current | This enable the IGMP snooping functon . |
| 1.3.6.1.4.1.8691.7.1.20.2 | NodestaticMulticast | |||
| 1.3.6.1.4.1.8691.7.1.20.2.1 | TablestaticMulticastTable | not-accessible | current | The static multicast table. |
| 1.3.6.1.4.1.8691.7.1.20.2.1.1 | RowstaticMulticastEntry | not-accessible | current | Static multicast Entry. |
| 1.3.6.1.4.1.8691.7.1.20.2.1.1.1 | ColumnstaticMulticastAddress | read-create | current | The static multicast address. |
| 1.3.6.1.4.1.8691.7.1.20.2.1.1.2 | ColumnstaticMulticastPortMask | read-create | current | The port map of the static multicast address. |
| 1.3.6.1.4.1.8691.7.1.20.2.1.1.3 | ColumnstaticMulticastStatus | read-create | current | The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy… |
| 1.3.6.1.4.1.8691.7.1.21 | NoderateLimiting | |||
| 1.3.6.1.4.1.8691.7.1.21.1 | TablerateLimitingTable | not-accessible | current | The rate limiting table. |
| 1.3.6.1.4.1.8691.7.1.21.1.1 | RowrateLimitingEntry | not-accessible | current | Rate limiting Entry. |
| 1.3.6.1.4.1.8691.7.1.21.1.1.1 | ColumningressLimitMode | read-write | current | The ingress limit mode. |
| 1.3.6.1.4.1.8691.7.1.21.1.1.2 | ColumningressLowPriLimitRate | read-write | current | The ingress limiting rate of low priority queue. |
| 1.3.6.1.4.1.8691.7.1.21.1.1.3 | ColumningressNormalPriLimitRate | read-write | current | The ingress limiting rate of normal priority queue. The values being equal to or double value of ingressLowPriLimitRate are valid for set. |
| 1.3.6.1.4.1.8691.7.1.21.1.1.4 | ColumningressMediumPriLimitRate | read-write | current | The ingress limiting rate of medium priority queue. The values being equal to or double value of ingressNormalPriLimitRate are valid for set. |
| 1.3.6.1.4.1.8691.7.1.21.1.1.5 | ColumningressHighPriLimitRate | read-write | current | The ingress limiting rate of high priority queue. The values being equal to or double value of ingressMediumPriLimitRate are valid for set. |
| 1.3.6.1.4.1.8691.7.1.21.1.1.6 | ColumnegressLimitRate | read-write | current | The egress limiting rate. |
| 1.3.6.1.4.1.8691.7.1.22 | NodeportLock | |||
| 1.3.6.1.4.1.8691.7.1.22.1 | TableportLockTable | not-accessible | current | The port lock table. |
| 1.3.6.1.4.1.8691.7.1.22.1.1 | RowportLockEntry | not-accessible | current | Port Lock Entry. |
| 1.3.6.1.4.1.8691.7.1.22.1.1.1 | ColumnenablePortLock | read-write | current | This enable the port lock. |
| 1.3.6.1.4.1.8691.7.1.22.2 | TablestaticUnicastTable | not-accessible | current | The static unicast table. |
| 1.3.6.1.4.1.8691.7.1.22.2.1 | RowstaticUnicastEntry | not-accessible | current | Static unicast Entry. |
| 1.3.6.1.4.1.8691.7.1.22.2.1.1 | ColumnstaticUnicastAddress | read-create | current | The static unicast address. |
| 1.3.6.1.4.1.8691.7.1.22.2.1.2 | ColumnstaticUnicastPort | read-create | current | The port of the static unicast address. |
| 1.3.6.1.4.1.8691.7.1.22.2.1.3 | ColumnstaticUnicastPriority | read-create | current | The priority of the static unicast address. |
| 1.3.6.1.4.1.8691.7.1.22.2.1.4 | ColumnstaticUnicastStatus | read-create | current | The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy… |
| 1.3.6.1.4.1.8691.7.1.30 | NodeaccessibleIP | |||
| 1.3.6.1.4.1.8691.7.1.30.1 | ScalarenableAccessibleIP | read-write | current | Enable the accessible IP address list. |
| 1.3.6.1.4.1.8691.7.1.30.2 | TableaccessibleIpTable | not-accessible | current | accessibleIP. |
| 1.3.6.1.4.1.8691.7.1.30.2.1 | RowaccessibleIpEntry | not-accessible | current | Accessible IP address entry. |
| 1.3.6.1.4.1.8691.7.1.30.2.1.1 | ColumnaccessibleIpAddress | read-create | current | Accessible IP address |
| 1.3.6.1.4.1.8691.7.1.30.2.1.2 | ColumnaccessibleIpNetMask | read-create | current | Accessible IP netmask. |
| 1.3.6.1.4.1.8691.7.1.30.2.1.3 | ColumnaIpStatus | read-create | current | The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy… |
| 1.3.6.1.4.1.8691.7.1.31 | NodesysFileUpdate | |||
| 1.3.6.1.4.1.8691.7.1.31.1 | ScalartftpServer | read-write | current | The TFTP Server name(IP Address) |
| 1.3.6.1.4.1.8691.7.1.31.2 | ScalarfirmwarePathName | read-write | current | The path name of firmware file in the TFTP Server |
| 1.3.6.1.4.1.8691.7.1.31.3 | ScalarlogPathName | read-write | current | The path name of log file in the TFTP Server |
| 1.3.6.1.4.1.8691.7.1.31.4 | ScalarconfPathName | read-write | current | The path name of configuration file in the TFTP Server |
| 1.3.6.1.4.1.8691.7.1.32 | NodetimeSetting | |||
| 1.3.6.1.4.1.8691.7.1.32.1 | ScalarsysDateTime | read-write | current | The date time of system |
| 1.3.6.1.4.1.8691.7.1.32.2 | ScalarcalibratePeriod | read-write | current | The period (seconds) that calibrate with time server |
| 1.3.6.1.4.1.8691.7.1.32.3 | ScalartimeServer1 | read-write | current | The first time server |
| 1.3.6.1.4.1.8691.7.1.32.4 | ScalartimeServer2 | read-write | current | The second time server |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING (SIZE (0..512)) | current |