MOXA-NPS8000-MIB
652 objects
The MIB module for Moxa NPort S8000 series specific information.
Imported Objects
| SNMPv2-SMI | enterprises IpAddress OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8691 | Nodemoxa | |||
| 1.3.6.1.4.1.8691.2 | Nodenport | |||
| 1.3.6.1.4.1.8691.2.12 | Identitynps8000 | The MIB module for Moxa NPort S8000 series specific information. | ||
| 1.3.6.1.4.1.8691.2.12.1 | NodeswMgmt | |||
| 1.3.6.1.4.1.8691.2.12.1.1 | Nodeoverview | |||
| 1.3.6.1.4.1.8691.2.12.1.1.1 | ScalarmodelName | read-only | current | NPort S8455 series: Combo switch/serial device with 4 serial ports, 3 Ethernet ports, 2 fiber ports. NPort S8458 series: Combo switch/serial device with 4 seri… |
| 1.3.6.1.4.1.8691.2.12.1.1.2 | ScalarserialNo | read-only | current | The serial number of the NPort. Every NPort S8000 series device server is assigned a unique serial number before it is shipped. |
| 1.3.6.1.4.1.8691.2.12.1.1.3 | ScalarfirmwareVersion | read-only | current | The version of the firmware currently running on the NPort. |
| 1.3.6.1.4.1.8691.2.12.1.1.4 | ScalarviewIpAddr | read-only | current | The version of the firmware currently running on the NPort. |
| 1.3.6.1.4.1.8691.2.12.1.1.5 | ScalarmacAddress | read-only | current | The MAC address of the NPort's Ethernet interface. |
| 1.3.6.1.4.1.8691.2.12.1.1.6 | ScalarupTime | read-only | current | The time (in human-readable notation) since the system was last re-initialized. |
| 1.3.6.1.4.1.8691.2.12.1.2 | NodebasicSettings | |||
| 1.3.6.1.4.1.8691.2.12.1.2.1 | NodegeneralSettings | |||
| 1.3.6.1.4.1.8691.2.12.1.2.1.1 | ScalarserverName | read-write | current | A text string used to identify the NPort. |
| 1.3.6.1.4.1.8691.2.12.1.2.1.2 | ScalarserverLocation | read-write | current | A text string used to identify the location of the NPort. This option is useful for specifying the location or application of different NPort device servers. |
| 1.3.6.1.4.1.8691.2.12.1.2.1.3 | ScalarserverDescription | read-write | current | serverDescription. |
| 1.3.6.1.4.1.8691.2.12.1.2.1.4 | ScalarmaintainerContactInfo | read-write | current | maintainerContactInfo. |
| 1.3.6.1.4.1.8691.2.12.1.2.1.5 | ScalargeneralSettingActive | read-write | current | Submit general setting. |
| 1.3.6.1.4.1.8691.2.12.1.2.2 | NodetimeSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.2.2.1 | ScalarsysDateTime | read-write | current | The date time of system |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2 | NodedaylightSaving | |||
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.1 | ScalarstartMonth | read-write | current | Setting Start Month of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.2 | ScalarstartWeek | read-write | current | Setting Start Week of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.3 | ScalarstartDay | read-write | current | Setting Start Day of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.4 | ScalarstartHour | read-write | current | Setting Start Hour of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.5 | ScalarendMonth | read-write | current | Setting End Month of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.6 | ScalarendWeek | read-write | current | Setting End Week of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.7 | ScalarendDay | read-write | current | Setting End Day of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.8 | ScalarendHour | read-write | current | Setting End Hour of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.2.9 | ScalaroffsetHours | read-write | current | Setting Offset Hours of Daylight Saving time |
| 1.3.6.1.4.1.8691.2.12.1.2.2.3 | ScalartimeZone | read-write | current | The time-zone index of the NPort. |
| 1.3.6.1.4.1.8691.2.12.1.2.2.4 | ScalartimeServer1 | read-write | current | The first time server |
| 1.3.6.1.4.1.8691.2.12.1.2.2.5 | ScalartimeServer2 | read-write | current | The second time server |
| 1.3.6.1.4.1.8691.2.12.1.2.2.6 | ScalarcalibratePeriod | read-write | current | The period (seconds) that calibrate with time server |
| 1.3.6.1.4.1.8691.2.12.1.2.2.7 | ScalartimeSettingActive | read-write | current | Submit time setting. |
| 1.3.6.1.4.1.8691.2.12.1.2.3 | NodenetworkSettings | |||
| 1.3.6.1.4.1.8691.2.12.1.2.3.1 | ScalarautoIPConfig | read-write | current | The auto IP config. |
| 1.3.6.1.4.1.8691.2.12.1.2.3.2 | ScalarserverIpAddr | read-write | current | The IP Address of this server. |
| 1.3.6.1.4.1.8691.2.12.1.2.3.3 | ScalarsubMask | read-write | current | The Subnet Mask of this server. |
| 1.3.6.1.4.1.8691.2.12.1.2.3.4 | Scalargateway | read-write | current | The gateway of this server. |
| 1.3.6.1.4.1.8691.2.12.1.2.3.5 | ScalardnsServer1IPAddr | read-write | current | The first DNS Server address. |
| 1.3.6.1.4.1.8691.2.12.1.2.3.6 | ScalardnsServer2IPAddr | read-write | current | The first DNS Server address. |
| 1.3.6.1.4.1.8691.2.12.1.2.3.7 | ScalartcpAliveChkTime | read-write | current | The TCP alive check time. |
| 1.3.6.1.4.1.8691.2.12.1.2.3.8 | ScalarnetworkSettingActive | read-write | current | Submit network setting. |
| 1.3.6.1.4.1.8691.2.12.1.3 | NodeportSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1 | NodeopModeSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.1 | NodeopMode | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.1.1 | TableopModePortTable | not-accessible | current | The serial ports' operation mode table. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.1.1.1 | RowopModePortEntry | not-accessible | current | The serial port's operation mode entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.1.1.1.1 | ColumnportIndex | read-only | current | The serial port index. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.1.1.1.2 | ColumnportMode | read-write | current | The application of the serial port. Note that changing this setting may also change the operation mode. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2 | Nodeapplication | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1 | Noderealcom | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1 | TablerealComTable | not-accessible | current | The serial ports' operation mode table. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1.1 | RowrealComEntry | not-accessible | current | The serial port's operation mode entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1.1.1 | ColumnrealcomMaxConnection | read-write | current | Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specif… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1.1.2 | ColumnrealcomIgnoreJammedIp | read-write | current | Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped respo… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1.1.3 | ColumnrealcomAllowDriverControl | read-write | current | If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, contr… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1.1.4 | ColumnrealcomConnectionDownRTS | read-write | current | For some applications, serial devices must obtain the Ethernet link status by reading the RTS signal from the NPort S8000 series device server. If this setting… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1.1.5 | ColumnrealcomConnectionDownDTR | read-write | current | For some applications, serial devices must obtain the Ethernet link status by reading the DTR signal from the NPort S8000 series device server. If this setting… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.1.1.1.6 | ColumnrealcomTcpAliveChkTime | read-write | current | The TCP alive check time. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.2 | Noderfc2217 | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.2.1 | Tablerfc2217Table | not-accessible | current | The serial ports' operation mode table. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.2.1.1 | Rowrfc2217Entry | not-accessible | current | The serial port's operation mode entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.2.1.1.1 | Columnrfc2217TcpPort | read-write | current | The 'TCP port' is the TCP port that the NPort S8000 series device server uses to listen to connections, and that other devices must use to contact the NPort S8… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.2.1.1.2 | Columnrfc2217TcpAliveChkTime | read-write | current | The TCP alive check time. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3 | NodetcpServer | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1 | TabletcpServerTable | not-accessible | current | The serial ports' operation mode table. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1 | RowtcpServerEntry | not-accessible | current | The serial port's operation mode entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.1 | ColumntcpServerInactivityTime | read-write | current | 0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort S8000 series device server automatically closes the TCP connection if th… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.2 | ColumntcpServerMaxConnection | read-write | current | Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specif… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.3 | ColumntcpServerIgnoreJammedIp | read-write | current | Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped respo… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.4 | ColumntcpServerAllowDriverControl | read-write | current | If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, contr… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.5 | ColumntcpServerTcpServerConnectionDownRTS | read-write | current | For some applications, serial devices must obtain the Ethernet link status from the RTS signal sent by the NPort S8000 series device server. If this setting is… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.6 | ColumntcpServerTcpServerConnectionDownDTR | read-write | current | For some applications, serial devices must obtain the Ethernet link status from the DTR signal sent by the NPort S8000 series device server. If this setting is… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.7 | ColumntcpServerTcpPort | read-write | current | The 'TCP port' is the TCP port that the NPort S8000 series device server uses to listen to connections, and that other devices must use to contact the NPort S8… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.8 | ColumntcpServerCmdPort | read-write | current | The 'Command port' is a TCP port used to listen for IP-Serial Lib commands from the host. In order to prevent a TCP port conflict with other applications, the … |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.3.1.1.9 | ColumntcpServerTcpAliveChkTime | read-write | current | The TCP alive check time. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4 | NodetcpClient | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1 | TabletcpClientTable | not-accessible | current | The serial ports' operation mode table. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1 | RowtcpClientEntry | not-accessible | current | The serial port's operation mode entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.1 | ColumntcpClientInactivityTime | read-write | current | 0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort S8000 series device server automatically closes the TCP connection if th… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.2 | ColumntcpClientIgnoreJammedIp | read-write | current | Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped respo… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.3 | ColumntcpClientDestinationAddress1 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this IP address. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.4 | ColumntcpClientDestinationPort1 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this TCP port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.5 | ColumntcpClientDestinationAddress2 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this IP address. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.6 | ColumntcpClientDestinationPort2 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this TCP port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.7 | ColumntcpClientDestinationAddress3 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this IP address. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.8 | ColumntcpClientDestinationPort3 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.9 | ColumntcpClientDestinationAddress4 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this IP address. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.10 | ColumntcpClientDestinationPort4 | read-write | current | The NPort S8000 series device server can connect actively to a remote host that has this port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.11 | ColumntcpClientDesignatedLocalPort1 | read-write | current | The local TCP port used to connect actively to the remote host. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.12 | ColumntcpClientDesignatedLocalPort2 | read-write | current | The local TCP port used to connect actively to the remote host. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.13 | ColumntcpClientDesignatedLocalPort3 | read-write | current | The local TCP port used to connect actively to the remote host. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.14 | ColumntcpClientDesignatedLocalPort4 | read-write | current | The local TCP port used to connect actively to the remote host. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.15 | ColumntcpClientConnectionControl | read-write | current | Events that cause the TCP client to drop the connection. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.4.1.1.16 | ColumntcpClientTcpAliveChkTime | read-write | current | The TCP alive check time. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5 | Nodeudp | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1 | TableudpTable | not-accessible | current | The serial ports' operation mode table. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1 | RowudpEntry | not-accessible | current | The serial port's operation mode entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.1 | ColumnudpDestinationAddress1Begin | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinatio… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.2 | ColumnudpDestinationAddress1End | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress1Begin and … |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.3 | ColumnudpDestinationPort1 | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts that have this port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.4 | ColumnudpDestinationAddress2Begin | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinatio… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.5 | ColumnudpDestinationAddress2End | read-write | current | The NPort S8000 series device server can actively send UDP packets to the remote hosts whose IP addresses are in the range between udpDestinationAddress2Begin … |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.6 | ColumnudpDestinationPort2 | read-write | current | The NPort S8000 series device server can actively send UDP packets to the remote hosts that have this TCP port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.7 | ColumnudpDestinationAddress3Begin | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinatio… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.8 | ColumnudpDestinationAddress3End | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress3Begin and … |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.9 | ColumnudpDestinationPort3 | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts that have this TCP port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.10 | ColumnudpDestinationAddress4Begin | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinatio… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.11 | ColumnudpDestinationAddress4End | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress4Begin and … |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.12 | ColumnudpDestinationPort4 | read-write | current | The NPort S8000 series device server can actively send UDP packets to remote hosts that have this TCP port number. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.2.5.1.1.13 | ColumnudpLocalListenPort | read-write | current | The UDP port that the NPort S8000 series device server listens to and that other devices must use to contact the NPort S8000 series device server. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3 | NodedataPacking | |||
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1 | TabledataPackingPortTable | not-accessible | current | The Data Packing table. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1 | RowdataPackingPortEntry | not-accessible | current | The Data Packing entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1.1 | ColumnportPacketLength | read-write | current | If the value is 0, the Delimiter Process will be used, regardless of the length of the data packet. If the data length (in bytes) matches the configured value,… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1.2 | ColumnportDelimiter1Enable | read-write | current | Enable the first delimiter character. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1.3 | ColumnportDelimiter1 | read-write | current | The first delimiter character, in hex decimal. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1.4 | ColumnportDelimiter2Enable | read-write | current | Enable the second delimiter character. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1.5 | ColumnportDelimiter2 | read-write | current | The second delimiter character, in hex decimal. |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1.6 | ColumnportDelimiterProcess | read-write | current | 'delimiterAddOne' or 'delimiterAddTwo': The data will be transmitted when an additional byte (for 'delimiterAddOne'), or an additional 2 bytes (for 'delimiterA… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.3.1.1.7 | ColumnportForceTransmit | read-write | current | 0: Disable the force transmit timeout. 1 to 65535: Forces the NPort S8000 series device server's TCP/IP protocol software to try to pack serial data received d… |
| 1.3.6.1.4.1.8691.2.12.1.3.1.4 | ScalaropModeSettingActive | read-write | current | Submit opMode setting for all of serial ports. |
| 1.3.6.1.4.1.8691.2.12.1.3.2 | NodecomParamSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.3.2.1 | TablecomParamPortTable | not-accessible | current | The Communication Parameters table. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1 | RowcomParamPortEntry | not-accessible | current | The Communication Parameters entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.1 | ColumnportAlias | read-write | current | Port alias is included to allow easy identification of the serial devices that are connected to NPort S8000 series device server's serial port. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.2 | ColumnportBaudRate | read-write | current | The port's speed in bits per second. You can choose a standard baud rate by indexing. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.3 | ColumnportDataBits | read-write | current | The number of bits in a character for the port. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.4 | ColumnportStopBits | read-write | current | The number of stop bits for the port. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.5 | ColumnportParity | read-write | current | The parity bit for the port. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.6 | ColumnportFlowControl | read-write | current | The flow-control method for the port. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.7 | ColumnportFIFO | read-write | current | Enable or disable the port's FIFO. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.8 | ColumnportInterface | read-write | current | The serial interface that the port works on. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.1.1.9 | ColumnportBaudRateManual | read-write | current | The port's speed in bits per second. You can specify a baud rate manually. |
| 1.3.6.1.4.1.8691.2.12.1.3.2.2 | ScalarcomParamSettingActive | read-write | current | Submit communication parameters setting for all of serial ports. |
| 1.3.6.1.4.1.8691.2.12.1.3.3 | NodeserialTosSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.3.3.1 | TableserialTosTable | not-accessible | current | The Communication Parameters table. |
| 1.3.6.1.4.1.8691.2.12.1.3.3.1.1 | RowserialTosEntry | not-accessible | current | The Communication Parameters entry. |
| 1.3.6.1.4.1.8691.2.12.1.3.3.1.1.1 | ColumnserialTosEnable | read-write | current | The serial port TOS is enable or not. |
| 1.3.6.1.4.1.8691.2.12.1.3.3.1.1.2 | ColumnserialTosValue | read-write | current | The serial port TOS value, the last 2 bits not be used. |
| 1.3.6.1.4.1.8691.2.12.1.3.3.2 | ScalarserialTosSettingActive | read-write | current | Submit serial Tos setting for all of serial ports. |
| 1.3.6.1.4.1.8691.2.12.1.4 | NodeethernetSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.4.1 | NodeportSettings | |||
| 1.3.6.1.4.1.8691.2.12.1.4.1.1 | TableportTable | not-accessible | current | The port table. |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1 | RowportEntry | not-accessible | current | The port entry. |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1.1 | ColumnportIndex-Eth | read-only | current | The port index. |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1.2 | ColumnportEnable | read-write | current | This enable the port. |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1.3 | ColumnportDesc | read-only | current | The port description |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1.4 | ColumnportName | read-write | current | The port Name |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1.5 | ColumnportSpeed | read-write | current | The port speed and duplex. |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1.6 | ColumnportFDXFlowCtrl | read-write | current | The port FDX Flow Control |
| 1.3.6.1.4.1.8691.2.12.1.4.1.1.1.7 | ColumnportMDI | read-write | current | The port MDI/MDIX. |
| 1.3.6.1.4.1.8691.2.12.1.4.1.2 | ScalarportSettingActive | read-write | current | Submit all of ethernet port setting. |
| 1.3.6.1.4.1.8691.2.12.1.4.2 | NodeportTrunking | |||
| 1.3.6.1.4.1.8691.2.12.1.4.2.1 | TabletrunkSettingTable | not-accessible | current | Port Trunking Setting Table. |
| 1.3.6.1.4.1.8691.2.12.1.4.2.1.1 | RowtrunkSettingEntry | not-accessible | current | Port Trunking Setting Entry. |
| 1.3.6.1.4.1.8691.2.12.1.4.2.1.1.1 | ColumntrunkSettingIndex | read-only | current | Trunking Group Index. |
| 1.3.6.1.4.1.8691.2.12.1.4.2.1.1.2 | ColumntrunkType | read-write | current | Trunking Group Type. |
| 1.3.6.1.4.1.8691.2.12.1.4.2.1.1.3 | ColumntrunkMemberPorts | read-write | current | Trunking Group Member Ports. |
| 1.3.6.1.4.1.8691.2.12.1.4.2.2 | ScalarportTrunkingActive | read-write | current | Submit port trunkning setting. |
| 1.3.6.1.4.1.8691.2.12.1.4.3 | NodecommRedundancy | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.1 | ScalarprotocolOfRedundancySetup | read-write | current | This set the redundancy protocol of this server. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2 | NodespanningTree | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.1 | ScalarspanningTreeBridgePriority | read-write | current | The bridge priority of spanning tree protocol. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.2 | ScalarspanningTreeHelloTime | read-write | current | The hello time of spanning tree protocol. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.3 | ScalarspanningTreeMaxAge | read-write | current | The max. age of spanning tree protocol. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.4 | ScalarspanningTreeForwardingDelay | read-write | current | Tje forwarding delay of spanning tree protocol. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.5 | TablespanningTreeTable | not-accessible | current | The spanning tree table. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.5.1 | RowspanningTreeEntry | not-accessible | current | The spanning tree port entry. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.5.1.1 | ColumnspanningTreeIndex | read-only | current | The index of spanning tree table. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.5.1.2 | ColumnenableSpanningTree | read-write | current | This enable of spanning tree protocol for this port. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.5.1.3 | ColumnspanningTreePortPriority | read-write | current | The port priority of spanning tree protocol. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.2.5.1.4 | ColumnspanningTreePortCost | read-write | current | The port cost of spanning tree protocol. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.3 | NodeturboRing | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.3.1 | ScalarturboRingMasterSetup | read-write | current | Set this to be Master. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.3.2 | ScalarturboRingRdntPort1 | read-write | current | The port number of 1st Redundant Port on the TURBO RING. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.3.3 | ScalarturboRingRdntPort2 | read-write | current | The port number of 2nd Redundant Port on the TURBO RING. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.3.4 | ScalarturboRingEnableCoupling | read-write | current | This enable the ring coupling function. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.3.5 | ScalarturboRingCouplingPort | read-write | current | The coupling port of ring coupling function. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.3.6 | ScalarturboRingControlPort | read-write | current | The control port of ring coupling function. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4 | NodeturboRingV2 | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.1 | NodeturboRingV2Ring1 | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.1.1 | ScalarringIndexRing1 | read-only | current | The turboRingV2 Ring Index. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.1.2 | ScalarringEnableRing1 | read-write | current | The turboRingV2 Ring1 Enalbe Config. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.1.3 | ScalarmasterSetupRing1 | read-write | current | Is this a Master or Slave. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.1.4 | Scalarrdnt1stPortRing1 | read-write | current | The port number of 1st Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.1.5 | Scalarrdnt2ndPortRing1 | read-write | current | The port number of 2nd Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.2 | NodeturboRingV2Ring2 | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.2.1 | ScalarringIndexRing2 | read-only | current | The turboRingV2 Ring Index. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.2.2 | ScalarringEnableRing2 | read-write | current | The turboRingV2 Ring2 Enalbe Config. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.2.3 | ScalarmasterSetupRing2 | read-write | current | Is this a Master or Slave. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.2.4 | Scalarrdnt1stPortRing2 | read-write | current | The port number of 1st Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.2.5 | Scalarrdnt2ndPortRing2 | read-write | current | The port number of 2nd Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.3 | NodeturboRingV2Coupling | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.3.1 | ScalarcouplingEnable | read-write | current | Setting the ring coupling enable. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.3.2 | ScalarcouplingMode | read-write | current | Setting the ring coupling mode. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.3.3 | Scalarcoupling1stPort | read-write | current | If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port' |
| 1.3.6.1.4.1.8691.2.12.1.4.3.4.3.4 | Scalarcoupling2ndPort | read-write | current | If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.5 | ScalarcommRedundancyActive | read-write | current | Submit communication redundancy setting. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.6 | NodeturboChain | |||
| 1.3.6.1.4.1.8691.2.12.1.4.3.6.1 | ScalarturboChainRole | read-write | current | The device's role in Turbo Chain. |
| 1.3.6.1.4.1.8691.2.12.1.4.3.6.2 | ScalarturboChainPort1 | read-write | current | If the device's role is Head, this variable assigns the Head Port. If the device's role is Member, this variable assigns the first Member Port. If the device's… |
| 1.3.6.1.4.1.8691.2.12.1.4.3.6.3 | ScalarturboChainPort2 | read-write | current | If the device's role is Head, this variable assigns the Member Port. If the device's role is Member, this variable assigns the second Member Port. If the devic… |
| 1.3.6.1.4.1.8691.2.12.1.4.4 | NoderateLimiting | |||
| 1.3.6.1.4.1.8691.2.12.1.4.4.1 | TablerateLimitingTable | not-accessible | current | The rate limiting table. |
| 1.3.6.1.4.1.8691.2.12.1.4.4.1.1 | RowrateLimitingEntry | not-accessible | current | Rate limiting Entry. |
| 1.3.6.1.4.1.8691.2.12.1.4.4.1.1.1 | ColumnlimitMode | read-write | current | The limit mode. |
| 1.3.6.1.4.1.8691.2.12.1.4.4.1.1.2 | ColumnlowPriLimitRate | read-write | current | The limiting rate of low priority queue. |
| 1.3.6.1.4.1.8691.2.12.1.4.4.1.1.3 | ColumnnormalPriLimitRate | read-write | current | The limiting rate of normal priority queue. The values being equal to or double value of lowPriLimitRate are valid for set. |
| 1.3.6.1.4.1.8691.2.12.1.4.4.1.1.4 | ColumnmediumPriLimitRate | read-write | current | The limiting rate of medium priority queue. The values being equal to or double value of normalPriLimitRate are valid for set. |
| 1.3.6.1.4.1.8691.2.12.1.4.4.1.1.5 | ColumnhighPriLimitRate | read-write | current | The limiting rate of high priority queue. The values being equal to or double value of mediumPriLimitRate are valid for set. |
| 1.3.6.1.4.1.8691.2.12.1.4.4.2 | ScalarrateLimitActive | read-write | current | Submit rate limit setting. |
| 1.3.6.1.4.1.8691.2.12.1.4.5 | NodelineSwapFastRecovery | |||
| 1.3.6.1.4.1.8691.2.12.1.4.5.1 | ScalarlineSwapRecovery | read-write | current | This enable line-swap-fast-recovery function. |
| 1.3.6.1.4.1.8691.2.12.1.4.5.2 | ScalarlineSwapActive | read-write | current | Submit line swap fast recovery setting. |
| 1.3.6.1.4.1.8691.2.12.1.5 | NodeethernetAdvSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.5.1 | NodetrafficPrioritization | |||
| 1.3.6.1.4.1.8691.2.12.1.5.1.1 | NodeqosClassification | |||
| 1.3.6.1.4.1.8691.2.12.1.5.1.1.1 | ScalarqueuingMechanism | read-write | current | The queuing mechanism. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.1.2 | TableqosPortTable | not-accessible | current | The QOS port table. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.1.2.1 | RowqosPortEntry | not-accessible | current | The QOS Port Entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.1.2.1.1 | ColumninspectTos | read-write | current | This enable the inspection of TOS field. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.1.2.1.2 | ColumninspectCos | read-write | current | This enable the inspection of COS field. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.1.2.1.3 | ColumnportPriority | read-write | current | The deault priority of the port. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.1.3 | ScalarqosClassificationActive | read-write | current | Submit Qos classification setting. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.2 | NodecosMapping | |||
| 1.3.6.1.4.1.8691.2.12.1.5.1.2.1 | TablecosMappingTable | not-accessible | current | The COS mapping table. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.2.1.1 | RowcosMappingEntry | not-accessible | current | The COS mapping Entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.2.1.1.1 | ColumncosTag | read-only | current | The cos tag of TOS field. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.2.1.1.2 | ColumncosMappedPriority | read-write | current | The frame's priority corresponding to it's COS tag value. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.2.2 | ScalarcosMappingActive | read-write | current | Submit Cos mapping setting. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.3 | NodetosMapping | |||
| 1.3.6.1.4.1.8691.2.12.1.5.1.3.1 | TabletosMappingTable | not-accessible | current | The TOS mapping table. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.3.1.1 | RowtosMappingEntry | not-accessible | current | TOS mapping Entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.3.1.1.1 | ColumntosClass | read-only | current | The TOS class of TOS field. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.3.1.1.2 | ColumntosMappedPriority | read-write | current | The frame's priority corresponding to it's TOS class value. |
| 1.3.6.1.4.1.8691.2.12.1.5.1.3.2 | ScalartosMappingActive | read-write | current | Submit TOS mapping setting. |
| 1.3.6.1.4.1.8691.2.12.1.5.2 | Nodevlan | |||
| 1.3.6.1.4.1.8691.2.12.1.5.2.1 | ScalarvlanType | read-write | current | VLAN Type. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.2 | ScalarmanagementVlanId | read-write | current | The management VLAN id. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.3 | TablevlanPortSettingTable | not-accessible | current | The vlan seting table of ports. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.3.1 | RowvlanPortSettingEntry | not-accessible | current | Port Setting Entry of VLAN. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.3.1.1 | ColumnportVlanType | read-write | current | The vlan type of port. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.3.1.2 | ColumnportDefaultVid | read-write | current | The PVID of port. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.3.1.3 | ColumnportFixedVid | read-write | current | The fixed vids of (trunk) port. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.3.1.4 | ColumnportForbiddenVid | read-write | current | The forbidden vids of (trunk)port. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.4 | TableportbaseVlanSettingTable | not-accessible | current | Port base Vlan Setting Table. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.4.1 | RowportbaseVlanSettingEntry | not-accessible | current | Port base Vlan Setting Entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.4.1.1 | ColumnportbaseVlanSettingIndex | read-only | current | port base Vlan Group Index. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.4.1.2 | ColumnportbaseVlanMemberPorts | read-write | current | port base Vlan Group Member Ports. |
| 1.3.6.1.4.1.8691.2.12.1.5.2.5 | ScalarvlanActive | read-write | current | Submit VLAN setting. |
| 1.3.6.1.4.1.8691.2.12.1.5.3 | NodemulticastFiltering | |||
| 1.3.6.1.4.1.8691.2.12.1.5.3.1 | NodeigmpSnooping | |||
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.1 | ScalarenableGlobalIgmpSnooping | read-write | current | This enable the IGMP snooping functon . |
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.2 | ScalarquerierQueryInterval | read-write | current | This query interval of the querier function for this VLAN. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.3 | TableigmpSnoopingSettingTable | not-accessible | current | The IGMP snooping setting table. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.3.1 | RowigmpSnoopingSettingEntry | not-accessible | current | The IGMP snooping setting Entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.3.1.1 | ColumnenableIgmpSnooping | read-write | current | This enable the IGMP snooping functon in this VLAN. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.3.1.2 | ColumnenableQuerier | read-write | current | This enable the querier function for this VLAN. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.3.1.3 | ColumnfixedMulticastQuerierPorts | read-write | current | The ports that multicast-Querier exist. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.1.4 | ScalarigmpSnoopingActive | read-write | current | Submit GIMP snoopong setting. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.2 | NodestaticMulticast | |||
| 1.3.6.1.4.1.8691.2.12.1.5.3.2.1 | TablestaticMulticastTable | not-accessible | current | The static multicast table. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.2.1.1 | RowstaticMulticastEntry | not-accessible | current | Static multicast Entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.2.1.1.1 | ColumnstaticMulticastIndex | read-only | current | The static multicast index. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.2.1.1.2 | ColumnstaticMulticastAddress | read-create | current | The static multicast address. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.2.1.1.3 | ColumnstaticMulticastPorts | read-create | current | The port map of the static multicast address. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.2.1.1.4 | ColumnstaticMulticastStatus | read-create | current | The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy… |
| 1.3.6.1.4.1.8691.2.12.1.5.3.3 | Nodegmrp | |||
| 1.3.6.1.4.1.8691.2.12.1.5.3.3.1 | TablegmrpSettingTable | not-accessible | current | The GMRP setting table. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.3.1.1 | RowgmrpSettingEntry | not-accessible | current | The GMRP Setting Entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.3.1.1.1 | ColumnenableGMRP | read-write | current | Enable/Disable GMRP. |
| 1.3.6.1.4.1.8691.2.12.1.5.3.3.2 | ScalargmrpActive | read-write | current | Submit GMRP setting. |
| 1.3.6.1.4.1.8691.2.12.1.5.4 | NodesetDeviceIp | |||
| 1.3.6.1.4.1.8691.2.12.1.5.4.1 | TablesetDevIpTable | not-accessible | current | The set devvice IP table. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.1.1 | RowsetDevIpEntry | not-accessible | current | The set devvice IP table entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.1.1.1 | ColumnsetDevIpIndex | read-only | current | The set devvice IP index. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.1.1.2 | ColumnsetDevIpCurrentIpofDevice | read-only | current | The current IP address of connected to this port. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.1.1.3 | ColumnsetDevIpPresentBy | read-only | current | The protocol used that assigning IP to the device. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.1.1.4 | ColumnsetDevIpDedicatedIp | read-write | current | The IP address when assign to the device connected to this port. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.2 | ScalarsetDeviceIpActive | read-write | current | Submit automatic set device IP by DHCP/Bootp/RARP and DHCP relay agent setting. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.3 | ScalardhcpServer1 | read-write | current | The IP address1 of the relay agent. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.4 | ScalardhcpServer2 | read-write | current | The IP address2 of the relay agent. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.5 | ScalardhcpServer3 | read-write | current | The IP address3 of the relay agent. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.6 | ScalardhcpServer4 | read-write | current | The IP address4 of the relay agent. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7 | NodeDHCPOption82 | |||
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.1 | ScalarenableOption82 | read-write | current | The Option 82 information contains 2 sub-options: Circuit ID and Remote ID, which define the relationship between end device IP and the DHCP Option 82 server. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.2 | Scalaroption82Type | read-write | current | The type of DHCP option 82. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.3 | Scalaroption82Value | read-write | current | The value of DHCP option 82. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.4 | Scalaroption82Display | read-only | current | The display of DHCP option 82. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.5 | TabledhcpFunctionTable | not-accessible | current | DHCP Function Table. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.5.1 | RowdhcpFunctionEntry | not-accessible | current | The DHCP Function Table entry. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.5.1.1 | ColumndhcpPortIndex | read-only | current | The DHCP Function Table index. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.5.1.2 | ColumndhcpPortCirduitID | read-only | current | The DHCP Function Table Cirduit-ID. |
| 1.3.6.1.4.1.8691.2.12.1.5.4.7.5.1.3 | ColumndhcpPortO82enable | read-write | current | The port enable of DHCP Function Table. |
| 1.3.6.1.4.1.8691.2.12.1.6 | NodesystemManagement | |||
| 1.3.6.1.4.1.8691.2.12.1.6.1 | NodemiscNetwork | |||
| 1.3.6.1.4.1.8691.2.12.1.6.1.1 | NodeaccessibleIP | |||
| 1.3.6.1.4.1.8691.2.12.1.6.1.1.1 | ScalarenableAccessibleIP | read-write | current | Enable the accessible IP address list. |
| 1.3.6.1.4.1.8691.2.12.1.6.1.1.2 | TableaccessibleIpTable | not-accessible | current | accessibleIP. |
| 1.3.6.1.4.1.8691.2.12.1.6.1.1.2.1 | RowaccessibleIpEntry | not-accessible | current | Accessible IP address entry. |
| 1.3.6.1.4.1.8691.2.12.1.6.1.1.2.1.1 | ColumnaccessibleIpIndex | read-only | current | Accessible IP list index. |
| 1.3.6.1.4.1.8691.2.12.1.6.1.1.2.1.2 | ColumnaccessibleIpAddress | read-write | current | Accessible IP address |
| 1.3.6.1.4.1.8691.2.12.1.6.1.1.2.1.3 | ColumnaccessibleIpNetMask | read-write | current | Accessible IP netmask. |
| 1.3.6.1.4.1.8691.2.12.1.6.1.1.3 | ScalaraccessibleIPActive | read-write | current | Submit accessible IP list setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.1.2 | NodesyslogSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.6.1.2.1 | ScalarsyslogServer1 | read-write | current | The syslog server 1 |
| 1.3.6.1.4.1.8691.2.12.1.6.1.2.2 | ScalarsyslogServer1port | read-write | current | The syslog server 1 port |
| 1.3.6.1.4.1.8691.2.12.1.6.1.2.3 | ScalarsyslogServer2 | read-write | current | The syslog server 2 |
| 1.3.6.1.4.1.8691.2.12.1.6.1.2.4 | ScalarsyslogServer2port | read-write | current | The syslog server 2 port |
| 1.3.6.1.4.1.8691.2.12.1.6.1.2.5 | ScalarsyslogServer3 | read-write | current | The syslog server 3 |
| 1.3.6.1.4.1.8691.2.12.1.6.1.2.6 | ScalarsyslogServer3port | read-write | current | The syslog server 3 port |
| 1.3.6.1.4.1.8691.2.12.1.6.1.2.7 | ScalarsyslogSettingActive | read-write | current | Submit syslog server setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.2 | NodeportAccessControl | |||
| 1.3.6.1.4.1.8691.2.12.1.6.2.1 | NodestaticPortLock | |||
| 1.3.6.1.4.1.8691.2.12.1.6.2.1.1 | ScalarstaticPortLockAddress | read-create | current | The static port lock address. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.1.2 | ScalarstaticPortLockPort | read-create | current | The port of the static port lock address. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.1.3 | ScalarstaticPortLockStatus | read-create | current | The status is active to indicate normal. Use createAndGo to create new on multiple SET. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2 | Nodedot1x | |||
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.1 | ScalardataBaseOption | read-write | current | Set IEEE 802.1X database option. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.2 | ScalarradiusServer | read-write | current | Set Radius Server IP Address/Domain name. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.3 | ScalarradiusPort | read-write | current | Set Radius Port. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.4 | ScalarradiusSharedKey | read-write | current | Set Radius Shared Key. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.5 | Scalardot1xReauthEnable | read-write | current | Enable/Disable IEEE 802.1X Re-authentication. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.6 | Scalardot1xReauthPeriod | read-write | current | Set IEEE 802.1X Re-authentication Period. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.7 | Tabledot1xSettingTable | not-accessible | current | IEEE 802.1X Port Setting Table. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.7.1 | Rowdot1xSettingEntry | not-accessible | current | IEEE 802.1X Port Setting Entry. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.7.1.1 | ColumnenableDot1X | read-write | current | Enable/Disable IEEE 802.1X. |
| 1.3.6.1.4.1.8691.2.12.1.6.2.2.8 | Scalardot1xActive | read-write | current | Submit 802.1X setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.3 | NodeautoWarming | |||
| 1.3.6.1.4.1.8691.2.12.1.6.3.1 | NodeemailAlert | |||
| 1.3.6.1.4.1.8691.2.12.1.6.3.1.1 | ScalaremailWarningMailServer | read-write | current | The email server's Ip Address/Domain name of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.1.2 | ScalaremailWarningFromEmail | read-write | current | The e-mail address to be filled in the 'From' field of the auto-warning e-mail. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.1.3 | ScalaremailWarningFirstEmailAddr | read-write | current | The first email address of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.1.4 | ScalaremailWarningSecondEmailAddr | read-write | current | The second email address of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.1.5 | ScalaremailWarningThirdEmailAddr | read-write | current | The third email address of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.1.6 | ScalaremailWarningFourthEmailAddr | read-write | current | The fourth email address of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.1.7 | ScalaremailAlertActive | read-write | current | Submit EMail alert setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2 | Nodesnmp | |||
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.1 | ScalarsnmpReadCommunity | read-write | current | The SNMP read community name |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.2 | ScalartrapServerAddr1 | read-write | current | The IP address/Domain name of SNMP trap server |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.3 | ScalarsnmpTrapCommunity1 | read-write | current | The SNMP trap community name |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.4 | Scalartrap2ServerAddr | read-write | current | The IP address/Domain name of Second SNMP trap server |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.5 | ScalarsnmpTrap2Community | read-write | current | The Second SNMP trap community name |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.6 | ScalarsnmpActive | read-write | current | Submit SNMP setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.7 | ScalarSnmpInformEnable | read-write | current | Enable snmp inform. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.8 | ScalarSnmpInformRetries | read-write | current | Retries of snmp inform. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.2.9 | ScalarSnmpInformTimeout | read-write | current | Timeout of snmp inform. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3 | NodeemailWarningEventType | |||
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.1 | ScalaremailWarningEventServerColdStart | read-write | current | The server cold start event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.2 | ScalaremailWarningEventServerWarmStart | read-write | current | The server warm start event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.3 | ScalaremailWarningEventPowerOn2Off | read-write | current | The power on event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.4 | ScalaremailWarningEventPowerOff2On | read-write | current | The power off event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.5 | TableemailWarningEventDiTable | not-accessible | current | The DI table of the email warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.5.1 | RowemailWarningEventDiEntry | not-accessible | current | The DI table entry of the email warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.5.1.1 | ColumnemailWarningEventDiInputOn2Off | read-write | current | The DI input off event of email warning function . |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.5.1.2 | ColumnemailWarningEventDiInputOff2On | read-write | current | The DI input on event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.6 | ScalaremailWarningEventConfigChange | read-write | current | The configuration changed event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.7 | ScalaremailWarningEventAuthFail | read-write | current | The authentication fail event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.8 | ScalaremailWarningEventTopologyChanged | read-write | current | The communication redundancy topology changed event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.9 | TableemailWarningEventSerialPortTable | not-accessible | current | The port table of the email warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.9.1 | RowemailWarningEventSerialPortEntry | not-accessible | current | The port table entry of the email warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.9.1.1 | ColumnemailWarningEventSerailDCDChange | read-write | current | A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indi… |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.9.1.2 | ColumnemailWarningEventSerailDSRChange | read-write | current | A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it i… |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.10 | TableemailWarningEventEthernetPortTable | not-accessible | current | The port table of the email warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.10.1 | RowemailWarningEventEthernetPortEntry | not-accessible | current | The port table entry of the email warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.10.1.1 | ColumnemailWarningEventEthernetPortLinkOn | read-write | current | The port link on event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.10.1.2 | ColumnemailWarningEventEthernetPortLinkOff | read-write | current | The port link off event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.10.1.3 | ColumnemailWarningEventEthernetPortTrafficOverload | read-write | current | The port's traffic overloading event of email warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.10.1.4 | ColumnemailWarningEventEthernetPortTrafficThreshold | read-write | current | The port's traffic threshold of the overloading event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.10.1.5 | ColumnemailWarningEventEthernetPortTrafficDuration | read-write | current | The port's traffic duration of the overloading event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.3.11 | ScalaremailWarningEventTypeActive | read-write | current | Submit Email event type setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4 | NodesnmpWarningEventType | |||
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.1 | ScalarsnmpWarningEventServerColdStart | read-write | current | The server cold start event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.2 | ScalarsnmpWarningEventServerWarmStart | read-write | current | The server warm start event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.3 | ScalarsnmpWarningEventPowerOn2Off | read-write | current | The power on event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.4 | ScalarsnmpWarningEventPowerOff2On | read-write | current | The power off event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.5 | TablesnmpWarningEventDiTable | not-accessible | current | The DI table of the snmp warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.5.1 | RowsnmpWarningEventDiEntry | not-accessible | current | The DI table entry of the snmp warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.5.1.1 | ColumnsnmpWarningEventDiInputOn2Off | read-write | current | The DI input off event of snmp warning function . |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.5.1.2 | ColumnsnmpWarningEventDiInputOff2On | read-write | current | The DI input on event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.6 | ScalarsnmpWarningEventConfigChange | read-write | current | The configuration changed event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.7 | ScalarsnmpWarningEventAuthFail | read-write | current | The authentication fail event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.8 | ScalarsnmpWarningEventTopologyChanged | read-write | current | The communication redundancy topology changed event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.9 | TablesnmpWarningEventSerailPortTable | not-accessible | current | Port Event Settings Table. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.9.1 | RowsnmpWarningEventSerailPortEntry | not-accessible | current | Port Event Settings entry. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.9.1.1 | ColumnsnmpWarningEventSerailDCDchange | read-write | current | A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indi… |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.9.1.2 | ColumnsnmpWarningEventSerailDSRchange | read-write | current | A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it i… |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.10 | TablesnmpWarningEventEthernetPortTable | not-accessible | current | The port table of the snmp warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.10.1 | RowsnmpWarningEventEthernetPortEntry | not-accessible | current | The port table entry of the snmp warning event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.10.1.1 | ColumnsnmpWarningEventEthernetPortLinkOn | read-write | current | The port link on event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.10.1.2 | ColumnsnmpWarningEventEthernetPortLinkOff | read-write | current | The port link off event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.10.1.3 | ColumnsnmpWarningEventEthernetPortTrafficOverload | read-write | current | The port's traffic overloading event of snmp warning function. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.10.1.4 | ColumnsnmpWarningEventEthernetPortTrafficThreshold | read-write | current | The port's traffic threshold of the overloading event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.10.1.5 | ColumnsnmpWarningEventEthernetPortTrafficDuration | read-write | current | The port's traffic duration of the overloading event. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.4.11 | ScalarsnmpWarningEventTypeActive | read-write | current | Submit SNMP event type setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5 | NoderelayWarning | |||
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1 | TablerelayWarningTable | not-accessible | current | The relay warning table. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1 | RowrelayWarningEntry | not-accessible | current | Relay Warning Entry. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.1 | ColumnrelayAlarmIndex | read-only | current | The Relay alarm index. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.2 | ColumnrelayWarningRelayContact | read-only | current | The first Relay contact status. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.3 | ColumnoverrideRelayWarningSetting | read-write | current | Override the relay warning setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.4 | ColumnrelayWarningPower1Off | read-write | current | The relay contact will be opened while the first power input off. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.5 | ColumnrelayWarningPower1OffStatus | read-only | current | The relay contact is opened as the first power input off.. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.6 | ColumnrelayWarningPower2Off | read-write | current | The relay contact will be opened while the second power input off. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.7 | ColumnrelayWarningPower2OffStatus | read-only | current | The relay contact is opened as the second power input off. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.8 | ColumnrelayWarningTurboRingBreak | read-write | current | The relay contact will be opened while turbo ring break. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.1.1.9 | ColumnrelayWarningTurboRingBreakStatus | read-only | current | The relay contact is opened while turbo ring is broken. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2 | TableportRelayWarningTable | not-accessible | current | The relay warning port table. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2.1 | RowportRelayWarningEntry | not-accessible | current | Port Relay Warning Entry. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2.1.1 | ColumnrelayWarningLinkChanged | read-write | current | The relay contact will be opened while this port's link status is changed. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2.1.2 | ColumnrelayWarningLinkChangedStatus | read-only | current | The relay contact is opened as this port's link status is changed. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2.1.3 | ColumnrelayWarningTrafficOverload | read-write | current | The relay contact will be opened while this port's traffic is overload. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2.1.4 | ColumnrelayWarningTrafficOverloadStatus | read-only | current | The relay contact is opened as this port's traffic is overload. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2.1.5 | ColumnrelayWarningTrafficThreshold | read-write | current | The threshold of the port traffic will be over loading. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.2.1.6 | ColumnrelayWarningTrafficDuration | read-write | current | The duration of the port traffic will be over loading. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.3 | TablediRelayWarningTable | not-accessible | current | The relay warning DI table. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.3.1 | RowdiRelayWarningEntry | not-accessible | current | DI Relay Warning Entry. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.3.1.1 | ColumnrelayWarningDiInputChanged | read-write | current | The relay contact will be opened while the DI input changed. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.3.1.2 | ColumnrelayWarningDiInputChangedStatus | read-only | current | The relay contact is opened as the first DI input changed.. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.5.4 | ScalarrelayWarningActive | read-write | current | Submit relay warring setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6 | NodesysLogSettings | |||
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.1 | ScalarsysLocalLog | read-write | current | Log the following events to the system log: System Cold Start, System Warm Start. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.2 | ScalarnetworkLocalLog | read-write | current | Log the following events to the system log: DHCP/BOOTP/PPPoE Get IP/Renew, NTP, Mail Fail, NTP Connect Fail, DHCP Fail, IP Conflict, Ethernet Link Down. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.3 | ScalarconfigLocalLog | read-write | current | Log the following events to the system log: Login Fail, IP Changed, Password Changed, Config Changed, Firmware Upgrade, SSL Key Import, Config Import, Config E… |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.4 | ScalaropModeLocalLog | read-write | current | Log the following op-mode events to the system log: Connect, Disconnect, Authentication Fail, Restart. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.5 | ScalarsysRemoteLog | read-write | current | Log the following events to the remote log server: System Cold Start, System Warm Start. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.6 | ScalarnetworkRemoteLog | read-write | current | Log the following events to the remote log server: DHCP/BOOTP/PPPoE Get IP/Renew, NTP, Mail Fail, NTP Connect Fail, DHCP Fail, IP Conflict, Ethernet Link Down. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.7 | ScalarconfigRemoteLog | read-write | current | Log the following events to the remote log server: Login Fail, IP Changed, Password Changed, Config Changed, Firmware Upgrade, SSL Key Import, Config Import, C… |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.8 | ScalaropModeRemoteLog | read-write | current | Log the following op-mode events to the remote log server: Connect, Disconnect, Authentication Fail, Restart. |
| 1.3.6.1.4.1.8691.2.12.1.6.3.6.9 | ScalarsysLogSettingsActive | read-write | current | Submit sysLog setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.4 | Nodemaintenance | |||
| 1.3.6.1.4.1.8691.2.12.1.6.4.1 | NodeconsoleSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.6.4.1.1 | ScalarwebConsole | read-write | current | Enable or disable Web console. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.1.2 | ScalarhttpConsole | read-write | current | Enable or disable HTTP console. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.1.3 | ScalartelnetConsole | read-write | current | Enable or disable Telnet console. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.1.4 | ScalarresetButtonFunction | read-write | current | Enable or disable reset button protection. You can disable the hardware reset button after the NPort S8000 series device server has been restarted for 60 secon… |
| 1.3.6.1.4.1.8691.2.12.1.6.4.1.5 | ScalarautoRefresh | read-write | current | Monitor refresh time. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.1.6 | ScalarconsoleSettingActive | read-write | current | Submit console setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.2 | NodeloadFactoryDefault | |||
| 1.3.6.1.4.1.8691.2.12.1.6.4.2.1 | ScalarloadFactoryDefaultSetting | read-write | current | This function will reset all of the NPort S8000 series device server's settings to the factory default values. Be aware that previous settings will be lost. Se… |
| 1.3.6.1.4.1.8691.2.12.1.6.4.4 | Nodemirroring | |||
| 1.3.6.1.4.1.8691.2.12.1.6.4.4.1 | ScalartargetPort | read-write | current | The mirrored port of mirroring function. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.4.2 | ScalarmonitorDirection | read-write | current | The traffic direction of mirroring function. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.4.3 | ScalarmirroringPort | read-write | current | The mirroring port of mirroring function. |
| 1.3.6.1.4.1.8691.2.12.1.6.4.4.4 | ScalarmirroringActive | read-write | current | Submit mirroring setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.5 | NodesysFileUpdate | |||
| 1.3.6.1.4.1.8691.2.12.1.6.5.1 | ScalartftpServer | read-write | current | The TFTP Server name(IP Address) |
| 1.3.6.1.4.1.8691.2.12.1.6.5.2 | ScalarconfPathName | read-write | current | The path name of configuration file in the TFTP Server |
| 1.3.6.1.4.1.8691.2.12.1.6.5.3 | ScalarfirmwarePathName | read-write | current | The path name of firmware file in the TFTP Server |
| 1.3.6.1.4.1.8691.2.12.1.6.5.4 | ScalarlogPathName | read-write | current | The path name of log file in the TFTP Server |
| 1.3.6.1.4.1.8691.2.12.1.6.5.5 | ScalarsysFileUpdateActive | read-write | current | Submit sysFileUpdate setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.6 | NodedipSwitchSetting | |||
| 1.3.6.1.4.1.8691.2.12.1.6.6.1 | ScalardipSwitchEnableTurboRing | read-write | current | Enable TurboRing Dip Switch functions |
| 1.3.6.1.4.1.8691.2.12.1.6.6.2 | ScalardipSwitchTurboRingType | read-write | current | Set DIP switch |
| 1.3.6.1.4.1.8691.2.12.1.6.6.3 | ScalardipSwitchSettingActive | read-write | current | Submit dip switch setting. |
| 1.3.6.1.4.1.8691.2.12.1.6.7 | Nodelldp | |||
| 1.3.6.1.4.1.8691.2.12.1.6.7.1 | ScalarlldpEnable | read-write | current | Enable LLDP function |
| 1.3.6.1.4.1.8691.2.12.1.6.7.2 | ScalarlldpMsgTxInterval | read-write | current | LLDP message transmit interval(valid range 5~32768) |
| 1.3.6.1.4.1.8691.2.12.1.7 | NodesystemMonitoring | |||
| 1.3.6.1.4.1.8691.2.12.1.7.1 | NodeserialStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.1.1 | Nodes2eConnections | |||
| 1.3.6.1.4.1.8691.2.12.1.7.1.1.1 | TablemonitorRemoteIpTable | not-accessible | current | Serial to Network Connections Remote IP table. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.1.1.1 | RowmonitorRemoteIpEntry | not-accessible | current | Serial to Network Connections Remote IP entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.1.1.1.1 | ColumnremoteIpIndex | read-only | current | Serial to Network Connections Remote IP index. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.1.1.1.2 | ColumnmonitorRemoteIp | read-only | current | The remote IP currently connecting to this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2 | NodeserialPortStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1 | TablemonitorSerialPortStatusTable | not-accessible | current | Serial Port Status table. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1 | RowmonitorSerialPortStatusEntry | not-accessible | current | Serial Port Status entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.1 | ColumnmonitorTxCount | read-only | current | View the number of bytes transmitted from the port since the last time the port was initialized. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.2 | ColumnmonitorRxCount | read-only | current | View the number of bytes received by the port since the last time the port was initialized. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.3 | ColumnmonitorTxTotalCount | read-only | current | View the number of bytes transmitted from the port since the last time the system was initialized. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.4 | ColumnmonitorRxTotalCount | read-only | current | View the number of bytes received by the port since the last time the system was initialized. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.5 | ColumnmonitorDSR | read-only | current | View the current DSR status of this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.6 | ColumnmonitorDTR | read-only | current | View the current DTR status of this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.7 | ColumnmonitorRTS | read-only | current | View the current RTS status of this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.8 | ColumnmonitorCTS | read-only | current | View the current CTS status of this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.2.1.1.9 | ColumnmonitorDCD | read-only | current | View the current DCD status of this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.3 | NodeserialPortErrorCount | |||
| 1.3.6.1.4.1.8691.2.12.1.7.1.3.1 | TablemonitorSerialPortErrorCountTable | not-accessible | current | Serial Port Error Count table. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.3.1.1 | RowmonitorSerialPortErrorCountEntry | not-accessible | current | Serial Port Error Count entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.3.1.1.1 | ColumnmonitorErrorCountFrame | read-only | current | View the number of 'Frame' errors for this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.3.1.1.2 | ColumnmonitorErrorCountParity | read-only | current | View the number of 'Parity' errors for this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.3.1.1.3 | ColumnmonitorErrorCountOverrun | read-only | current | View the number of 'Overrun' errors for this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.3.1.1.4 | ColumnmonitorErrorCountBreak | read-only | current | View the number of 'Break' errors for this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4 | NodeserialPortSettings | |||
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1 | TablemonitorSerialPortSettingsTable | not-accessible | current | Serial Port Settings table. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1 | RowmonitorSerialPortSettingsEntry | not-accessible | current | Serial Port Settings entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.1 | ColumnmonitorBaudRate | read-only | current | View the current baudrate of the port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.2 | ColumnmonitorDataBits | read-only | current | View the number of bits per byte for the port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.3 | ColumnmonitorStopBits | read-only | current | View the number of stop bits for the port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.4 | ColumnmonitorParity | read-only | current | View the parity bit for the port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.5 | ColumnmonitorRTSCTSFlowControl | read-only | current | View if the port is using RTS/CTS flow control. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.6 | ColumnmonitorXONXOFFFlowControl | read-only | current | View if the port is using XON/XOFF flow control. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.7 | ColumnmonitorFIFO | read-only | current | View FIFO status of this port. |
| 1.3.6.1.4.1.8691.2.12.1.7.1.4.1.1.8 | ColumnmonitorInterface | read-only | current | View the serial interface that the port is using. |
| 1.3.6.1.4.1.8691.2.12.1.7.2 | NodesystemStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.2.1 | NodesystemInfo | |||
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.1 | Scalarpower1InputStatus | read-only | current | The status of the first power input. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.2 | Scalarpower2InputStatus | read-only | current | The status of the second power input. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.3 | TablemonitorDiTable | not-accessible | current | The DI table of monitor function. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.3.1 | RowmonitorDiEntry | not-accessible | current | The DI table entry of monitor function. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.3.1.1 | ColumndiIndex | read-only | current | The DI index of monitor function |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.3.1.2 | ColumndiInputStatus | read-only | current | The DI input status. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.4 | ScalardipSwitchTurboRingPole | read-only | current | The TurboRing Pole status of Dip switch. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.5 | ScalardipSwitchRingCouplingPole | read-only | current | The Ring Coupling Pole status of Dip switch. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.1.6 | ScalardipSwitchRingMasterPole | read-only | current | The Ring Master Pole status of Dip switch. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2 | NodenetworkConnected | |||
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1 | TablenetworkConnTable | not-accessible | current | The Port Access Control table. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1 | RownetworkConnEntry | not-accessible | current | The Port Access Control table entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.1 | Columnprotocol | read-only | current | Connected potocol. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.2 | Columnrecv-q | read-only | current | Receiver queue size. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.3 | Columnsend-q | read-only | current | Send queue size. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.4 | ColumnlocalIpAddress | read-only | current | Local IP Address. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.5 | ColumnlocalPort | read-only | current | Local port. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.6 | ColumnremoteIpAddress | read-only | current | Remote IP Address. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.7 | ColumnremotePort | read-only | current | Remote port. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.2.1.1.8 | Columnstate | read-only | current | Connected state. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3 | NodeeventLog | |||
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1 | TableeventLogTable | not-accessible | current | The Port Access Control table. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1.1 | RoweventLogEntry | not-accessible | current | The Port Access Control table entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1.1.1 | ColumneventListIndex | read-only | current | index. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1.1.2 | ColumneventListBootup | read-only | current | index. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1.1.3 | ColumneventListData | read-only | current | index. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1.1.4 | ColumneventListTime | read-only | current | index. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1.1.5 | ColumneventListSysUpTime | read-only | current | index. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.1.1.6 | ColumneventListEvent | read-only | current | index. |
| 1.3.6.1.4.1.8691.2.12.1.7.2.3.2 | ScalareventListClear | read-write | current | index. |
| 1.3.6.1.4.1.8691.2.12.1.7.3 | NodeethernetStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.1 | NodemacAddressList | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.2 | Nodeigmpstatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.2.1 | TableigmpSnoopingMulticastGroupTable | not-accessible | current | The multicast group table by IGMP snooping function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.2.1.1 | RowigmpSnoopingMulticastGroupEntry | not-accessible | current | The multicast group entry by IGMP snooping function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.2.1.1.1 | ColumnlearnedMulticastQuerierPorts | read-only | current | The ports that multicast-Querier exist. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.2.1.1.2 | ColumnigmpSnoopingIpGroup | read-only | current | The multicast IP group by IGMP snooping function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.2.1.1.3 | ColumnigmpSnoopingMacGroup | read-only | current | The multicast MAC group by IGMP snooping function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.2.1.1.4 | ColumnigmpSnoopingJoinedPorts | read-only | current | The ports that joined this multicast group. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.3 | NodegmrpStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.3.1 | TablegmrpTable | not-accessible | current | The GMRP status table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.3.1.1 | RowgmrpEntry | not-accessible | current | The GMRP Status Entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.3.1.1.1 | ColumngmrpMulticastGroup | read-only | current | GMRP multicast group. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.3.1.1.2 | ColumngmrpFixedPorts | read-only | current | The ports that joined GMRP multicast group manually. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.3.1.1.3 | ColumngmrpLearnedPorts | read-only | current | The ports that joined GMRP multicast group by GMRP learning. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.4 | Nodedot1XReauth | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.4.1 | Tabledot1xReauthTable | not-accessible | current | IEEE 802.1X Re-authentication Table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.4.1.1 | Rowdot1xReauthEntry | not-accessible | current | IEEE 802.1X Re-authentication Entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.4.1.1.1 | Columndot1xReauthPortIndex | read-only | current | IEEE 802.1X Enabled Port Index. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.4.1.1.2 | Columndot1xReauth | read-write | current | Reauth IEEE 802.1X. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.4.2 | Scalardot1XReauthActive | read-write | current | Submit dot1X Reauth setting. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.5 | NodeportAccessControlList | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.5.1 | TableportAccessControlTable | not-accessible | current | The Port Access Control table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.5.1.1 | RowportAccessControlEntry | not-accessible | current | The Port Access Control table entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.5.1.1.1 | ColumnportAccessControlAddress | read-only | current | The MAC address which is static locked or IEEE 802.1X authorized. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.5.1.1.2 | ColumnportAccessControlPortNo | read-only | current | The port number that the Port Access Control address resides. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.5.1.1.3 | ColumnportAccessControlAccessStatus | read-only | current | The access status of the Port Access Control address. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.5.1.1.4 | ColumnportAccessControlStatus | read-create | current | The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy… |
| 1.3.6.1.4.1.8691.2.12.1.7.3.6 | NodewarningList | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.6.1 | TablewarningListTable | not-accessible | current | The Port Access Control table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.6.1.1 | RowwarningListEntry | not-accessible | current | The Port Access Control table entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.6.1.1.1 | ColumnwarningListIndex | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.6.1.1.2 | ColumnwarningListEvent | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.6.1.1.3 | ColumnwarningListRelay | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7 | NodeethernetMonitor | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1 | TableethernetMonitorTable | not-accessible | current | The Port Access Control table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1 | RowethernetMonitorEntry | not-accessible | current | The Port Access Control table entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.1 | ColumnethernetMonitorTxTotal | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.2 | ColumnethernetMonitorTxUicast | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.3 | ColumnethernetMonitorTxMulticast | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.4 | ColumnethernetMonitorTxBroadcast | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.5 | ColumnethernetMonitorTxCollision | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.6 | ColumnethernetMonitorRxTotal | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.7 | ColumnethernetMonitorRxUicast | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.8 | ColumnethernetMonitorRxMulticast | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.9 | ColumnethernetMonitorRxBroadcast | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.10 | ColumnethernetMonitorRxPause | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.11 | ColumnethernetMonitorTxErr | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.12 | ColumnethernetMonitorTxErrLate | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.13 | ColumnethernetMonitorTxErrExcessive | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.14 | ColumnethernetMonitorRxErr | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.15 | ColumnethernetMonitorRxErrCRC | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.16 | ColumnethernetMonitorRxErrDiscard | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.17 | ColumnethernetMonitorRxErrUndersize | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.18 | ColumnethernetMonitorRxErrFragments | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.19 | ColumnethernetMonitorRxErrOversize | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.1.1.20 | ColumnethernetMonitorRxErrJabber | read-only | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.2 | ScalarethernetMonitorReset | read-write | current | |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3 | TablemonitorPortTable | not-accessible | current | The port table of monitor function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3.1 | RowmonitorPortEntry | not-accessible | current | The port table entry of monitor function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3.1.1 | ColumnmonitorLinkStatus | read-only | current | The port link status. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3.1.2 | ColumnmonitorSpeed | read-only | current | The port speed and duplex status. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3.1.3 | ColumnmonitorFDXFlowCtrl | read-only | current | The Full-Duplex flow control status |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3.1.4 | ColumnmonitorAutoMDI | read-only | current | The port MDI/MDIX status. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3.1.5 | ColumnmonitorConnectedIP | read-only | current | The IP of connected device. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.7.3.1.6 | ColumnmonitorTraffic | read-only | current | The trafic loading percentage of port. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.8 | NodetrunkTableList | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.8.1 | TabletrunkTable | not-accessible | current | Port Trunking Table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.8.1.1 | RowtrunkEntry | not-accessible | current | Port Trunking Entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.8.1.1.1 | ColumntrunkIndex | read-only | current | Trunking Group Index. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.8.1.1.2 | ColumntrunkPort | read-only | current | Trunking Group Member Port. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.8.1.1.3 | ColumntrunkStatus | read-only | current | Trunking Port Status. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.9 | NodevlanList | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.9.1 | TablevlanTable | not-accessible | current | The VLAN table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.9.1.1 | RowvlanEntry | not-accessible | current | VLAN Entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.9.1.1.1 | ColumnvlanId | read-only | current | The VLAN id. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.9.1.1.2 | ColumnjoinedAccessPorts | read-only | current | The access ports that joined this VID. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.9.1.1.3 | ColumnjoinedTrunkPorts | read-only | current | The trunk ports that joined this VID. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10 | NodecommRedStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.1 | ScalaractiveProtocolOfRedundancy | read-only | current | This shows the active redundancy protocol of this server now. The none(0) stauts will be showed if only if the server's redundancy protocol is set to spanning … |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.2 | NodespanningTreeStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.2.1 | ScalarspanningTreeRoot | read-only | current | The root of spanning tree. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.2.2 | TablespanningTreeStatusTable | not-accessible | current | The spanning tree table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.2.2.1 | RowspanningTreeStatusEntry | not-accessible | current | The spanning tree port entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.2.2.1.1 | ColumnspanningTreePortStatus | read-only | current | The port status of spanning tree protocol. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3 | NodeturboRingStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.1 | ScalarturboRingMaster | read-only | current | Is this a Master or Slave. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.2 | TableturboRingPortTable | not-accessible | current | Turbo Ring Port Table. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.2.1 | RowturboRingPortEntry | not-accessible | current | Turbo Ring Port Entry. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.2.1.1 | ColumnturboRingPortIndex | read-only | current | Turbo Ring Port Index. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.2.1.2 | ColumnturboRingPortStatus | read-only | current | Turbo Ring Port Status. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.2.1.3 | ColumnturboRingPortDesignatedBridge | read-only | mandatory | The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.2.1.4 | ColumnturboRingPortDesignatedPort | read-only | mandatory | The Port Number of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.3 | ScalarturboRingDesignatedMaster | read-only | mandatory | The MAC address of the bridge which is the Master of the TURBO RING. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.4 | ScalarturboRingCouplingPortStatus | read-only | current | The coupling port status of ring coupling function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.5 | ScalarturboRingControlPortStatus | read-only | current | The control port status of ring coupling function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.3.6 | ScalarturboRingBrokenStatus | read-only | current | Turbo Ring broken display. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4 | NodeturboRingV2Status | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.1 | NodeturboRingV2Ring1Status | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.1.1 | ScalarmasterStatusRing1 | read-only | current | Set this to be Master. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.1.2 | ScalardesignatedMasterRing1 | read-only | mandatory | The MAC address of the bridge which is the Master of the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.1.3 | Scalarrdnt1stPortStatusRing1 | read-only | current | The status of 1st Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.1.4 | Scalarrdnt2ndPortStatusRing1 | read-only | current | The status of 2nd Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.1.5 | ScalarbrokenStatusRing1 | read-only | current | turboRingV2 broken display. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.2 | NodeturboRingV2Ring2Status | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.2.1 | ScalarmasterStatusRing2 | read-only | current | Set this to be Master. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.2.2 | ScalardesignatedMasterRing2 | read-only | mandatory | The MAC address of the bridge which is the Master of the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.2.3 | Scalarrdnt1stPortStatusRing2 | read-only | current | The status of 1st Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.2.4 | Scalarrdnt2ndPortStatusRing2 | read-only | current | The status of 2nd Redundant Port on the turboRingV2. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.2.5 | ScalarbrokenStatusRing2 | read-only | current | turboRingV2 broken display. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.3 | NodeturboRingV2CouplingStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.3.1 | Scalarcoupling1stPortStatus | read-only | current | The 1st coupling port status of coupling function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.4.3.2 | Scalarcoupling2ndPortStatus | read-only | current | The 2nd coupling port status of coupling function. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.5 | NodeturboChainStatus | |||
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.5.1 | ScalarturboChainPort1Status | read-only | current | Turbo Chain Port 1 Status |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.5.2 | ScalarturboChainPort2Status | read-only | current | Turbo Chain Port 2 Status |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.5.3 | ScalarturboChainPort1PartnerBridge | read-only | mandatory | The MAC address of the bridge which is attatched to this device's Turbo Chain Port 1. |
| 1.3.6.1.4.1.8691.2.12.1.7.3.10.5.4 | ScalarturboChainPort2PartnerBridge | read-only | mandatory | The MAC address of the bridge which is attatched to this device's Turbo Chain Port 2. |
| 1.3.6.1.4.1.8691.2.12.1.8 | Noderestart | |||
| 1.3.6.1.4.1.8691.2.12.1.8.1 | ScalarrestartSystem | read-write | current | Restart the NPort S8000 series device server. Be sure to save all of your configuration changes before you restart the system. Otherwise, all of the changes wi… |
| 1.3.6.1.4.1.8691.2.12.1.8.2 | ScalarrestartPortNumber | read-write | current | Restart serial port. Restarting will cause port reseting. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |