MPLS-FTN-STD-MIB
50 objects
Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3814. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains managed object definitions for specifying FEC to NHLFE (FTN) mappings and corresponding performance for MPLS.
Imported Objects
| DIFFSERV-DSCP-TC | Dscp |
| IF-MIB | ifCounterDiscontinuityGroup ifGeneralInformationGroup InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus StorageType TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.8 | IdentitymplsFTNStdMIB | Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3814. For full legal notices see the RFC itself or see: … | ||
| 1.3.6.1.2.1.10.166.8.0 | NodemplsFTNNotifications | |||
| 1.3.6.1.2.1.10.166.8.1 | NodemplsFTNObjects | |||
| 1.3.6.1.2.1.10.166.8.1.1 | ScalarmplsFTNIndexNext | read-only | current | This object contains the next available valid value to be used for mplsFTNIndex when creating entries in the mplsFTNTable. When creating a new conceptual row (… |
| 1.3.6.1.2.1.10.166.8.1.2 | ScalarmplsFTNTableLastChanged | read-only | current | Indicates the last time an entry was added, deleted or modified in mplsFTNTable. Management stations should consult this object to determine if mplsFTNTable re… |
| 1.3.6.1.2.1.10.166.8.1.3 | TablemplsFTNTable | not-accessible | current | This table contains the currently defined FTN entries. This table allows FEC to NHLFE mappings to be specified. Each entry in this table defines a rule to be a… |
| 1.3.6.1.2.1.10.166.8.1.3.1 | RowmplsFTNEntry | not-accessible | current | Each entry represents one FTN entry which defines a rule to compare incoming packets with and an action to be taken on matching packets. |
| 1.3.6.1.2.1.10.166.8.1.3.1.1 | ColumnmplsFTNIndex | not-accessible | current | This is the unique index for a conceptual row in mplsFTNTable. To create a new conceptual row in mplsFTNTable a Network Management Application SHOULD retrieve … |
| 1.3.6.1.2.1.10.166.8.1.3.1.2 | ColumnmplsFTNRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application … |
| 1.3.6.1.2.1.10.166.8.1.3.1.3 | ColumnmplsFTNDescr | read-create | current | The description of this FTN entry. Since the index for this table has no particular significance or meaning, this object should contain some meaningful text th… |
| 1.3.6.1.2.1.10.166.8.1.3.1.4 | ColumnmplsFTNMask | read-create | current | This bit map indicates which of the fields described next, namely source address range, destination address range, source port range, destination port range, I… |
| 1.3.6.1.2.1.10.166.8.1.3.1.5 | ColumnmplsFTNAddrType | read-create | current | This object determines the type of address contained in the source and destination address objects (mplsFTNSourceAddrMin, mplsFTNSourceAddrMax, mplsFTNDestAddr… |
| 1.3.6.1.2.1.10.166.8.1.3.1.6 | ColumnmplsFTNSourceAddrMin | read-create | current | The lower end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.166.8.1.3.1.7 | ColumnmplsFTNSourceAddrMax | read-create | current | The upper end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.166.8.1.3.1.8 | ColumnmplsFTNDestAddrMin | read-create | current | The lower end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.166.8.1.3.1.9 | ColumnmplsFTNDestAddrMax | read-create | current | The higher end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object. |
| 1.3.6.1.2.1.10.166.8.1.3.1.10 | ColumnmplsFTNSourcePortMin | read-create | current | The lower end of the source port range. |
| 1.3.6.1.2.1.10.166.8.1.3.1.11 | ColumnmplsFTNSourcePortMax | read-create | current | The higher end of the source port range |
| 1.3.6.1.2.1.10.166.8.1.3.1.12 | ColumnmplsFTNDestPortMin | read-create | current | The lower end of the destination port range. |
| 1.3.6.1.2.1.10.166.8.1.3.1.13 | ColumnmplsFTNDestPortMax | read-create | current | The higher end of the destination port range. |
| 1.3.6.1.2.1.10.166.8.1.3.1.14 | ColumnmplsFTNProtocol | read-create | current | The IP protocol to match against the IPv4 protocol number or IPv6 Next-Header number in the packet. A value of 255 means match all. Note that the protocol numb… |
| 1.3.6.1.2.1.10.166.8.1.3.1.15 | ColumnmplsFTNDscp | read-create | current | The contents of the DSCP field. |
| 1.3.6.1.2.1.10.166.8.1.3.1.16 | ColumnmplsFTNActionType | read-create | current | The type of action to be taken on packets matching this FTN entry. |
| 1.3.6.1.2.1.10.166.8.1.3.1.17 | ColumnmplsFTNActionPointer | read-create | current | If mplsFTNActionType is redirectLsp(1), then this object MUST contain zeroDotZero or point to a instance of mplsXCEntry indicating the LSP to redirect matching… |
| 1.3.6.1.2.1.10.166.8.1.3.1.18 | ColumnmplsFTNStorageType | read-create | current | The storage type for this FTN entry. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row. |
| 1.3.6.1.2.1.10.166.8.1.4 | ScalarmplsFTNMapTableLastChanged | read-only | current | Indicates the last time an entry was added, deleted or modified in mplsFTNMapTable. Management stations should consult this object to determine if the table re… |
| 1.3.6.1.2.1.10.166.8.1.5 | TablemplsFTNMapTable | not-accessible | current | This table contains objects which provide the capability to apply or map FTN rules as defined by entries in mplsFTNTable to specific interfaces in the system. … |
| 1.3.6.1.2.1.10.166.8.1.5.1 | RowmplsFTNMapEntry | not-accessible | current | Each conceptual row represents the application of an FTN rule at a specific position in the list of FTN rules applied on an interface. |
| 1.3.6.1.2.1.10.166.8.1.5.1.1 | ColumnmplsFTNMapIndex | not-accessible | current | The interface index that this FTN entry is being applied to. A value of zero indicates an entry that is applied all interfaces. Entries mapped to an interface … |
| 1.3.6.1.2.1.10.166.8.1.5.1.2 | ColumnmplsFTNMapPrevIndex | not-accessible | current | The index of the previous FTN entry that was applied to this interface. The special value zero indicates that this should be the first FTN entry in the list. |
| 1.3.6.1.2.1.10.166.8.1.5.1.3 | ColumnmplsFTNMapCurrIndex | not-accessible | current | Index of the current FTN entry that is being applied to this interface. |
| 1.3.6.1.2.1.10.166.8.1.5.1.4 | ColumnmplsFTNMapRowStatus | read-create | current | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a conceptual row in mplsFTNMapTabl… |
| 1.3.6.1.2.1.10.166.8.1.5.1.5 | ColumnmplsFTNMapStorageType | read-create | current | The storage type for this entry. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in this row. |
| 1.3.6.1.2.1.10.166.8.1.6 | TablemplsFTNPerfTable | not-accessible | current | This table contains performance statistics on FTN entries on a per-interface basis. |
| 1.3.6.1.2.1.10.166.8.1.6.1 | RowmplsFTNPerfEntry | not-accessible | current | Each entry contains performance information for the specified interface and an FTN entry mapped to this interface. |
| 1.3.6.1.2.1.10.166.8.1.6.1.1 | ColumnmplsFTNPerfIndex | not-accessible | current | The interface index of an interface that an FTN entry has been applied/mapped to. Each instance of this object corresponds to an instance of mplsFTNMapIndex. |
| 1.3.6.1.2.1.10.166.8.1.6.1.2 | ColumnmplsFTNPerfCurrIndex | not-accessible | current | Index of an FTN entry that has been applied/mapped to the specified interface. Each instance of this object corresponds to an instance of mplsFTNMapCurrIndex. |
| 1.3.6.1.2.1.10.166.8.1.6.1.3 | ColumnmplsFTNPerfMatchedPackets | read-only | current | Number of packets that matched the specified FTN entry if it is applied/mapped to the specified interface. Discontinuities in the value of this counter can occ… |
| 1.3.6.1.2.1.10.166.8.1.6.1.4 | ColumnmplsFTNPerfMatchedOctets | read-only | current | Number of octets that matched the specified FTN entry if it is applied/mapped to the specified interface. Discontinuities in the value of this counter can occu… |
| 1.3.6.1.2.1.10.166.8.1.6.1.5 | ColumnmplsFTNPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have … |
| 1.3.6.1.2.1.10.166.8.2 | NodemplsFTNConformance | |||
| 1.3.6.1.2.1.10.166.8.2.1 | NodemplsFTNGroups | |||
| 1.3.6.1.2.1.10.166.8.2.1.1 | GroupmplsFTNRuleGroup | current | Collection of objects that implement MPLS FTN rules. | |
| 1.3.6.1.2.1.10.166.8.2.1.2 | GroupmplsFTNMapGroup | current | Collection of objects that implement activation of MPLS FTN entries on interfaces. | |
| 1.3.6.1.2.1.10.166.8.2.1.3 | GroupmplsFTNPerfGroup | current | Collection of objects providing MPLS FTN performance information. | |
| 1.3.6.1.2.1.10.166.8.2.2 | NodemplsFTNCompliances | |||
| 1.3.6.1.2.1.10.166.8.2.2.1 | CompliancemplsFTNModuleFullCompliance | current | Compliance statement for agents that provide full support for MPLS-FTN-STD-MIB. | |
| 1.3.6.1.2.1.10.166.8.2.2.2 | CompliancemplsFTNModuleReadOnlyCompliance | not-accessible | current | Compliance requirement for implementations that only provide read-only support for MPLS-FTN-STD-MIB. Such devices can then be monitored but cannot be configure… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsFTNEntryIndex | Unsigned32 (1..4294967295) | current | Index for an entry in mplsFTNTable. |
| MplsFTNEntryIndexOrZero | Unsigned32 (0..4294967295) | current | Index for an entry in mplsFTNTable or the special value zero. The value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zer… |