MPLS-LSR-STD-MIB
112 objects
This MIB module contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, RFC 3031, January 2001. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html
Imported Objects
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | ifCounterDiscontinuityGroup ifGeneralInformationGroup InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| MPLS-TC-STD-MIB | MplsBitRate MplsLabel MplsLSPID MplsOwner mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | RowPointer RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.2 | IdentitymplsLsrStdMIB | This MIB module contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callo… | ||
| 1.3.6.1.2.1.10.166.2.0 | NodemplsLsrNotifications | |||
| 1.3.6.1.2.1.10.166.2.0.1 | NotificationmplsXCUp | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some … | |
| 1.3.6.1.2.1.10.166.2.0.2 | NotificationmplsXCDown | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the down(2) state from som… | |
| 1.3.6.1.2.1.10.166.2.1 | NodemplsLsrObjects | |||
| 1.3.6.1.2.1.10.166.2.1.1 | TablemplsInterfaceTable | not-accessible | current | This table specifies per-interface MPLS capability and associated information. |
| 1.3.6.1.2.1.10.166.2.1.1.1 | RowmplsInterfaceEntry | not-accessible | current | A conceptual row in this table is created automatically by an LSR for every interface capable of supporting MPLS and which is configured to do so. A conceptual… |
| 1.3.6.1.2.1.10.166.2.1.1.1.1 | ColumnmplsInterfaceIndex | not-accessible | current | This is a unique index for an entry in the MplsInterfaceTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry of the… |
| 1.3.6.1.2.1.10.166.2.1.1.1.2 | ColumnmplsInterfaceLabelMinIn | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.2.1.10.166.2.1.1.1.3 | ColumnmplsInterfaceLabelMaxIn | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.2.1.10.166.2.1.1.1.4 | ColumnmplsInterfaceLabelMinOut | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.2.1.10.166.2.1.1.1.5 | ColumnmplsInterfaceLabelMaxOut | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.2.1.10.166.2.1.1.1.6 | ColumnmplsInterfaceTotalBandwidth | read-only | current | This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable whe… |
| 1.3.6.1.2.1.10.166.2.1.1.1.7 | ColumnmplsInterfaceAvailableBandwidth | read-only | current | This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculat… |
| 1.3.6.1.2.1.10.166.2.1.1.1.8 | ColumnmplsInterfaceLabelParticipationType | read-only | current | If the value of the mplsInterfaceIndex for this entry is zero, then this entry corresponds to the per-platform label space for all interfaces configured to use… |
| 1.3.6.1.2.1.10.166.2.1.2 | TablemplsInterfacePerfTable | not-accessible | current | This table provides MPLS performance information on a per-interface basis. |
| 1.3.6.1.2.1.10.166.2.1.2.1 | RowmplsInterfacePerfEntry | not-accessible | current | An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the mplsInterfaceEntry table. Note that the… |
| 1.3.6.1.2.1.10.166.2.1.2.1.1 | ColumnmplsInterfacePerfInLabelsInUse | read-only | current | This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in onl… |
| 1.3.6.1.2.1.10.166.2.1.2.1.2 | ColumnmplsInterfacePerfInLabelLookupFailures | read-only | current | This object counts the number of labeled packets that have been received on this interface and which were discarded because there was no matching cross- connec… |
| 1.3.6.1.2.1.10.166.2.1.2.1.3 | ColumnmplsInterfacePerfOutLabelsInUse | read-only | current | This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count o… |
| 1.3.6.1.2.1.10.166.2.1.2.1.4 | ColumnmplsInterfacePerfOutFragmentedPkts | read-only | current | This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object MUST count on a per-inter… |
| 1.3.6.1.2.1.10.166.2.1.3 | ScalarmplsInSegmentIndexNext | read-only | current | This object contains the next available value to be used for mplsInSegmentIndex when creating entries in the mplsInSegmentTable. The special value of a string … |
| 1.3.6.1.2.1.10.166.2.1.4 | TablemplsInSegmentTable | not-accessible | current | This table contains a description of the incoming MPLS segments (labels) to an LSR and their associated parameters. The index for this table is mplsInSegmentIn… |
| 1.3.6.1.2.1.10.166.2.1.4.1 | RowmplsInSegmentEntry | not-accessible | current | An entry in this table represents one incoming segment as is represented in an LSR's LFIB. An entry can be created by a network administrator or an SNMP agent,… |
| 1.3.6.1.2.1.10.166.2.1.4.1.1 | ColumnmplsInSegmentIndex | not-accessible | current | The index for this in-segment. The string containing the single octet 0x00 MUST not be used as an index. |
| 1.3.6.1.2.1.10.166.2.1.4.1.2 | ColumnmplsInSegmentInterface | read-create | current | This object represents the interface index for the incoming MPLS interface. A value of zero represents all interfaces participating in the per-platform label s… |
| 1.3.6.1.2.1.10.166.2.1.4.1.3 | ColumnmplsInSegmentLabel | read-create | current | If the corresponding instance of mplsInSegmentLabelPtr is zeroDotZero then this object MUST contain the incoming label associated with this in-segment. If not … |
| 1.3.6.1.2.1.10.166.2.1.4.1.4 | ColumnmplsInSegmentLabelPtr | read-create | current | If the label for this segment cannot be represented fully within the mplsInSegmentLabel object, this object MUST point to the first accessible column of a conc… |
| 1.3.6.1.2.1.10.166.2.1.4.1.5 | ColumnmplsInSegmentNPop | read-create | current | The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packe… |
| 1.3.6.1.2.1.10.166.2.1.4.1.6 | ColumnmplsInSegmentAddrFamily | read-create | current | The IANA address family [IANAFamily] of packets received on this segment, which is used at an egress LSR to deliver them to the appropriate layer 3 entity. A v… |
| 1.3.6.1.2.1.10.166.2.1.4.1.7 | ColumnmplsInSegmentXCIndex | read-only | current | Index into mplsXCTable which identifies which cross- connect entry this segment is part of. The string containing the single octet 0x00 indicates that this ent… |
| 1.3.6.1.2.1.10.166.2.1.4.1.8 | ColumnmplsInSegmentOwner | read-only | current | Denotes the entity that created and is responsible for managing this segment. |
| 1.3.6.1.2.1.10.166.2.1.4.1.9 | ColumnmplsInSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTunnelResourceTable … |
| 1.3.6.1.2.1.10.166.2.1.4.1.10 | ColumnmplsInSegmentRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.2.1.10.166.2.1.4.1.11 | ColumnmplsInSegmentStorageType | read-create | current | This variable indicates the storage type for this object. The agent MUST ensure that this object's value remains consistent with the associated mplsXCEntry. Co… |
| 1.3.6.1.2.1.10.166.2.1.5 | TablemplsInSegmentPerfTable | not-accessible | current | This table contains statistical information for incoming MPLS segments to an LSR. |
| 1.3.6.1.2.1.10.166.2.1.5.1 | RowmplsInSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one incoming segment which is configured in the mplsInSegmentTable. The counters in this entry sh… |
| 1.3.6.1.2.1.10.166.2.1.5.1.1 | ColumnmplsInSegmentPerfOctets | read-only | current | This value represents the total number of octets received by this segment. It MUST be equal to the least significant 32 bits of mplsInSegmentPerfHCOctets if mp… |
| 1.3.6.1.2.1.10.166.2.1.5.1.2 | ColumnmplsInSegmentPerfPackets | read-only | current | Total number of packets received by this segment. |
| 1.3.6.1.2.1.10.166.2.1.5.1.3 | ColumnmplsInSegmentPerfErrors | read-only | current | The number of errored packets received on this segment. |
| 1.3.6.1.2.1.10.166.2.1.5.1.4 | ColumnmplsInSegmentPerfDiscards | read-only | current | The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being tr… |
| 1.3.6.1.2.1.10.166.2.1.5.1.5 | ColumnmplsInSegmentPerfHCOctets | read-only | current | The total number of octets received. This is the 64 bit version of mplsInSegmentPerfOctets, if mplsInSegmentPerfHCOctets is supported according to the rules sp… |
| 1.3.6.1.2.1.10.166.2.1.5.1.6 | ColumnmplsInSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.2.1.10.166.2.1.6 | ScalarmplsOutSegmentIndexNext | read-only | current | This object contains the next available value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. The special value of a strin… |
| 1.3.6.1.2.1.10.166.2.1.7 | TablemplsOutSegmentTable | not-accessible | current | This table contains a representation of the outgoing segments from an LSR. |
| 1.3.6.1.2.1.10.166.2.1.7.1 | RowmplsOutSegmentEntry | not-accessible | current | An entry in this table represents one outgoing segment. An entry can be created by a network administrator, an SNMP agent, or an MPLS signaling protocol. The o… |
| 1.3.6.1.2.1.10.166.2.1.7.1.1 | ColumnmplsOutSegmentIndex | not-accessible | current | This value contains a unique index for this row. While a value of a string containing the single octet 0x00 is not valid as an index for entries in this table,… |
| 1.3.6.1.2.1.10.166.2.1.7.1.2 | ColumnmplsOutSegmentInterface | read-create | current | This value must contain the interface index of the outgoing interface. This object cannot be modified if mplsOutSegmentRowStatus is active(1). The mplsOutSegme… |
| 1.3.6.1.2.1.10.166.2.1.7.1.3 | ColumnmplsOutSegmentPushTopLabel | read-create | current | This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true(1) if t… |
| 1.3.6.1.2.1.10.166.2.1.7.1.4 | ColumnmplsOutSegmentTopLabel | read-create | current | If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this va… |
| 1.3.6.1.2.1.10.166.2.1.7.1.5 | ColumnmplsOutSegmentTopLabelPtr | read-create | current | If the label for this segment cannot be represented fully within the mplsOutSegmentLabel object, this object MUST point to the first accessible column of a con… |
| 1.3.6.1.2.1.10.166.2.1.7.1.6 | ColumnmplsOutSegmentNextHopAddrType | read-create | current | Indicates the next hop Internet address type. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the o… |
| 1.3.6.1.2.1.10.166.2.1.7.1.7 | ColumnmplsOutSegmentNextHopAddr | read-create | current | The internet address of the next hop. The type of this address is determined by the value of the mplslOutSegmentNextHopAddrType object. This object cannot be m… |
| 1.3.6.1.2.1.10.166.2.1.7.1.8 | ColumnmplsOutSegmentXCIndex | read-only | current | Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of the string containing the single octet 0x00 indicates th… |
| 1.3.6.1.2.1.10.166.2.1.7.1.9 | ColumnmplsOutSegmentOwner | read-only | current | Denotes the entity which created and is responsible for managing this segment. |
| 1.3.6.1.2.1.10.166.2.1.7.1.10 | ColumnmplsOutSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the MplsTunnelResourceEntry… |
| 1.3.6.1.2.1.10.166.2.1.7.1.11 | ColumnmplsOutSegmentRowStatus | read-create | current | For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the mp… |
| 1.3.6.1.2.1.10.166.2.1.7.1.12 | ColumnmplsOutSegmentStorageType | read-create | current | This variable indicates the storage type for this object. The agent MUST ensure that this object's value remains consistent with the associated mplsXCEntry. Co… |
| 1.3.6.1.2.1.10.166.2.1.8 | TablemplsOutSegmentPerfTable | not-accessible | current | This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the in… |
| 1.3.6.1.2.1.10.166.2.1.8.1 | RowmplsOutSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one outgoing segment configured in mplsOutSegmentTable. The object mplsOutSegmentPerfDiscontinuit… |
| 1.3.6.1.2.1.10.166.2.1.8.1.1 | ColumnmplsOutSegmentPerfOctets | read-only | current | This value contains the total number of octets sent on this segment. It MUST be equal to the least significant 32 bits of mplsOutSegmentPerfHCOctets if mplsOut… |
| 1.3.6.1.2.1.10.166.2.1.8.1.2 | ColumnmplsOutSegmentPerfPackets | read-only | current | This value contains the total number of packets sent on this segment. |
| 1.3.6.1.2.1.10.166.2.1.8.1.3 | ColumnmplsOutSegmentPerfErrors | read-only | current | Number of packets that could not be sent due to errors on this segment. |
| 1.3.6.1.2.1.10.166.2.1.8.1.4 | ColumnmplsOutSegmentPerfDiscards | read-only | current | The number of labeled packets attempted to be transmitted on this out-segment, which were chosen to be discarded even though no errors had been detected to pre… |
| 1.3.6.1.2.1.10.166.2.1.8.1.5 | ColumnmplsOutSegmentPerfHCOctets | read-only | current | Total number of octets sent. This is the 64 bit version of mplsOutSegmentPerfOctets, if mplsOutSegmentPerfHCOctets is supported according to the rules spelled … |
| 1.3.6.1.2.1.10.166.2.1.8.1.6 | ColumnmplsOutSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.2.1.10.166.2.1.9 | ScalarmplsXCIndexNext | read-only | current | This object contains the next available value to be used for mplsXCIndex when creating entries in the mplsXCTable. A special value of the zero length string in… |
| 1.3.6.1.2.1.10.166.2.1.10 | TablemplsXCTable | not-accessible | current | This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsL… |
| 1.3.6.1.2.1.10.166.2.1.10.1 | RowmplsXCEntry | not-accessible | current | A row in this table represents one cross-connect entry. It is indexed by the following objects: - cross-connect index mplsXCIndex that uniquely identifies a gr… |
| 1.3.6.1.2.1.10.166.2.1.10.1.1 | ColumnmplsXCIndex | not-accessible | current | Primary index for the conceptual row identifying a group of cross-connect segments. The string containing a single octet 0x00 is an invalid index. |
| 1.3.6.1.2.1.10.166.2.1.10.1.2 | ColumnmplsXCInSegmentIndex | not-accessible | current | Incoming label index. If this object is set to the string containing a single octet 0x00, this indicates a special case outlined in the table's description abo… |
| 1.3.6.1.2.1.10.166.2.1.10.1.3 | ColumnmplsXCOutSegmentIndex | not-accessible | current | Index of out-segment for LSPs not terminating on this LSR if not set to the string containing the single octet 0x00. If the segment identified by this entry is… |
| 1.3.6.1.2.1.10.166.2.1.10.1.4 | ColumnmplsXCLspId | read-create | current | This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1) except f… |
| 1.3.6.1.2.1.10.166.2.1.10.1.5 | ColumnmplsXCLabelStackIndex | read-create | current | Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment… |
| 1.3.6.1.2.1.10.166.2.1.10.1.6 | ColumnmplsXCOwner | read-only | current | Denotes the entity that created and is responsible for managing this cross-connect. |
| 1.3.6.1.2.1.10.166.2.1.10.1.7 | ColumnmplsXCRowStatus | read-create | current | For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row except this object and the mp… |
| 1.3.6.1.2.1.10.166.2.1.10.1.8 | ColumnmplsXCStorageType | read-create | current | This variable indicates the storage type for this object. The agent MUST ensure that the associated in and out segments also have the same StorageType value an… |
| 1.3.6.1.2.1.10.166.2.1.10.1.9 | ColumnmplsXCAdminStatus | read-create | current | The desired operational status of this segment. |
| 1.3.6.1.2.1.10.166.2.1.10.1.10 | ColumnmplsXCOperStatus | read-only | current | The actual operational status of this cross- connect. |
| 1.3.6.1.2.1.10.166.2.1.11 | ScalarmplsMaxLabelStackDepth | read-only | current | The maximum stack depth supported by this LSR. |
| 1.3.6.1.2.1.10.166.2.1.12 | ScalarmplsLabelStackIndexNext | read-only | current | This object contains the next available value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The special string containin… |
| 1.3.6.1.2.1.10.166.2.1.13 | TablemplsLabelStackTable | not-accessible | current | This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable. |
| 1.3.6.1.2.1.10.166.2.1.13.1 | RowmplsLabelStackEntry | not-accessible | current | An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administ… |
| 1.3.6.1.2.1.10.166.2.1.13.1.1 | ColumnmplsLabelStackIndex | not-accessible | current | Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. An index containing the string with a singl… |
| 1.3.6.1.2.1.10.166.2.1.13.1.2 | ColumnmplsLabelStackLabelIndex | not-accessible | current | Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up th… |
| 1.3.6.1.2.1.10.166.2.1.13.1.3 | ColumnmplsLabelStackLabel | read-create | current | The label to pushed. |
| 1.3.6.1.2.1.10.166.2.1.13.1.4 | ColumnmplsLabelStackLabelPtr | read-create | current | If the label for this segment cannot be represented fully within the mplsLabelStackLabel object, this object MUST point to the first accessible column of a con… |
| 1.3.6.1.2.1.10.166.2.1.13.1.5 | ColumnmplsLabelStackRowStatus | read-create | current | For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row except this object and the mp… |
| 1.3.6.1.2.1.10.166.2.1.13.1.6 | ColumnmplsLabelStackStorageType | read-create | current | This variable indicates the storage type for this object. This object cannot be modified if mplsLabelStackRowStatus is active(1). No objects are required to be… |
| 1.3.6.1.2.1.10.166.2.1.14 | TablemplsInSegmentMapTable | not-accessible | current | This table specifies the mapping from the mplsInSegmentIndex to the corresponding mplsInSegmentInterface and mplsInSegmentLabel objects. The purpose of this ta… |
| 1.3.6.1.2.1.10.166.2.1.14.1 | RowmplsInSegmentMapEntry | not-accessible | current | An entry in this table represents one interface and incoming label pair. In cases where the label cannot fit into the mplsInSegmentLabel object, the mplsInSegm… |
| 1.3.6.1.2.1.10.166.2.1.14.1.1 | ColumnmplsInSegmentMapInterface | not-accessible | current | This index contains the same value as the mplsInSegmentIndex in the mplsInSegmentTable. |
| 1.3.6.1.2.1.10.166.2.1.14.1.2 | ColumnmplsInSegmentMapLabel | not-accessible | current | This index contains the same value as the mplsInSegmentLabel in the mplsInSegmentTable. |
| 1.3.6.1.2.1.10.166.2.1.14.1.3 | ColumnmplsInSegmentMapLabelPtrIndex | not-accessible | current | This index contains the same value as the mplsInSegmentLabelPtr. If the label for the InSegment cannot be represented fully within the mplsInSegmentLabel objec… |
| 1.3.6.1.2.1.10.166.2.1.14.1.4 | ColumnmplsInSegmentMapIndex | read-only | current | The mplsInSegmentIndex that corresponds to the mplsInSegmentInterface and mplsInSegmentLabel, or the mplsInSegmentInterface and mplsInSegmentLabelPtr, if appli… |
| 1.3.6.1.2.1.10.166.2.1.15 | ScalarmplsXCNotificationsEnable | read-write | current | If this object is set to true(1), then it enables the emission of mplsXCUp and mplsXCDown notifications; otherwise these notifications are not emitted. |
| 1.3.6.1.2.1.10.166.2.2 | NodemplsLsrConformance | |||
| 1.3.6.1.2.1.10.166.2.2.1 | NodemplsLsrGroups | |||
| 1.3.6.1.2.1.10.166.2.2.1.1 | GroupmplsInterfaceGroup | current | Collection of objects needed for MPLS interface and interface performance information. | |
| 1.3.6.1.2.1.10.166.2.2.1.2 | GroupmplsInSegmentGroup | current | Collection of objects needed to implement an in- segment. | |
| 1.3.6.1.2.1.10.166.2.2.1.3 | GroupmplsOutSegmentGroup | current | Collection of objects needed to implement an out- segment. | |
| 1.3.6.1.2.1.10.166.2.2.1.4 | GroupmplsXCGroup | current | Collection of objects needed to implement a cross-connect entry. | |
| 1.3.6.1.2.1.10.166.2.2.1.5 | GroupmplsPerfGroup | current | Collection of objects providing performance information about an LSR. | |
| 1.3.6.1.2.1.10.166.2.2.1.6 | GroupmplsHCInSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly. | |
| 1.3.6.1.2.1.10.166.2.2.1.7 | GroupmplsHCOutSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly. | |
| 1.3.6.1.2.1.10.166.2.2.1.8 | GroupmplsLabelStackGroup | current | Objects needed to support label stacking. | |
| 1.3.6.1.2.1.10.166.2.2.1.9 | GroupmplsLsrNotificationGroup | current | Set of notifications implemented in this module. | |
| 1.3.6.1.2.1.10.166.2.2.2 | NodemplsLsrCompliances | |||
| 1.3.6.1.2.1.10.166.2.2.2.1 | CompliancemplsLsrModuleFullCompliance | current | Compliance statement for agents that provide full support for MPLS-LSR-STD-MIB. Such devices can then be monitored and also be configured using this MIB module. | |
| 1.3.6.1.2.1.10.166.2.2.2.2 | CompliancemplsLsrModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for MPLS-LSR-STD-MIB. Such devices can then be monitored but cannot be configure… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsIndexNextType | OCTET STRING (SIZE(1..24)) | current | When a MIB module is used for configuration, an object with this SYNTAX always contains a legal value (a non-zero-length string) for an index that is not currently used in the relevant table. The Command Generator (Netw… |
| MplsIndexType | OCTET STRING (SIZE(1..24)) | current | This is an octet string that can be used as a table index in cases where a large addressable space is required such as on an LSR where many applications may be provisioning labels. Note that the string containing the si… |