MIB Viewer

MRV-IR-SYSTEM-MIB

153 objects
This is the MRV LX System MIB module.
Imported Objects
SNMPv2-SMICounter32 enterprises IpAddress MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCDisplayString RowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.33NodemrvBpd
1.3.6.1.4.1.33.100NodemrvLx
1.3.6.1.4.1.33.100.1IdentityirSystemMibThis is the MRV LX System MIB module.
1.3.6.1.4.1.33.100.1.1NodeirSysSystem
1.3.6.1.4.1.33.100.1.1.1ScalarirSysImageFilenameread-onlycurrentThe name of the image file running on the system.
1.3.6.1.4.1.33.100.1.1.2ScalarirSysImageSourceread-onlycurrentThis indicates from where the image file was loaded. A value of flash(1) means the file was loaded from flash. A value of network(2) means the file was loaded …
1.3.6.1.4.1.33.100.1.1.3ScalarirSysImageServerread-onlycurrentThe IP address of the server to be used when retrieving the image file via the network.
1.3.6.1.4.1.33.100.1.1.4ScalarirSysSwVersionread-onlycurrentA string indicating the software version running on the system.
1.3.6.1.4.1.33.100.1.1.5ScalarirSysSwBootVersionread-onlycurrentA string indicating the boot software version running on the system.
1.3.6.1.4.1.33.100.1.1.6ScalarirSysIpAddressread-onlycurrentThe IP address assigned to the ethernet interface.
1.3.6.1.4.1.33.100.1.1.7ScalarirSysSubnetMaskread-onlycurrentThe IP subnet mask assigned to the ethernet interface.
1.3.6.1.4.1.33.100.1.1.8ScalarirSysBcastAddressread-onlycurrentThe IP broadcast address assigned to the ethernet interface.
1.3.6.1.4.1.33.100.1.1.9ScalarirSysGatewayread-onlycurrentThe default gateway IP address configured for the system.
1.3.6.1.4.1.33.100.1.1.10ScalarirSysActionread-writecurrentA read of this object always returns the value other(1). Setting this object to saveConfig(2) saves the current config to flash. Setting this object to reset(3…
1.3.6.1.4.1.33.100.1.1.11ScalarirSysSnmpSetErrorStringread-writecurrentA text string that provides additional info when an snmp set request fails.
1.3.6.1.4.1.33.100.1.1.12ScalarirSysModelTyperead-onlycurrentThe device model type string.
1.3.6.1.4.1.33.100.1.1.13ScalarirSysPowerTyperead-onlycurrentThe type of power used by the device.
1.3.6.1.4.1.33.100.1.1.14ScalarirSysCurrentTempread-onlycurrentThe current temp reading (in celsius) for the onboard temperature sensor.
1.3.6.1.4.1.33.100.1.1.15ScalarirSysTempThresholdLowread-writecurrentThe low threshold temp setting (in celsius) for the device.
1.3.6.1.4.1.33.100.1.1.16ScalarirSysTempThresholdHighread-writecurrentThe high threshold temp setting (in celsius) for the device.
1.3.6.1.4.1.33.100.1.1.18ScalarirSysTempHysteresisread-writecurrentThe hysteresis setting applied to the temp thresholds for the device.
1.3.6.1.4.1.33.100.1.1.19ScalarirSysPowerLostTimestampread-onlycurrentA string containing the timestamp when the device last lost power.
1.3.6.1.4.1.33.100.1.1.20ScalarirSysFipsModeread-onlycurrentThe fips mode status.
1.3.6.1.4.1.33.100.1.1.21ScalarirSysFlashMemSizeread-onlycurrentThe size of flash memory, in megabytes, on the system.
1.3.6.1.4.1.33.100.1.1.22ScalarirSysAssetTagread-writecurrentThe configured asset tag string.
1.3.6.1.4.1.33.100.1.1.23ScalarirSysPowerCurrentLoadread-onlycurrentAn Ascii string indicating the total current load, in Amps, used by all power strips attached to this device.
1.3.6.1.4.1.33.100.1.2NodeirDevices
1.3.6.1.4.1.33.100.1.2.1NodeirDeviceLx
1.3.6.1.4.1.33.100.1.2.1.1NodeirLx1001
1.3.6.1.4.1.33.100.1.2.1.2NodeirLx1002
1.3.6.1.4.1.33.100.1.2.1.3NodeirLx1004
1.3.6.1.4.1.33.100.1.2.1.4NodeirLx4008
1.3.6.1.4.1.33.100.1.2.1.5NodeirLx4016
1.3.6.1.4.1.33.100.1.2.1.6NodeirLx4032
1.3.6.1.4.1.33.100.1.2.1.7NodeirLx4048
1.3.6.1.4.1.33.100.1.2.1.8NodeirLxEm316
1.3.6.1.4.1.33.100.1.2.1.9NodeirLx8020
1.3.6.1.4.1.33.100.1.2.1.10NodeirLx8040
1.3.6.1.4.1.33.100.1.2.1.11NodeirLx4000T
1.3.6.1.4.1.33.100.1.2.1.12NodeirLx7304T
1.3.6.1.4.1.33.100.1.2.1.13NodeirLx4108T
1.3.6.1.4.1.33.100.1.3NodeirTraps
1.3.6.1.4.1.33.100.1.4NodeirCluster
1.3.6.1.4.1.33.100.1.4.1NodeirClusterGrp
1.3.6.1.4.1.33.100.1.4.1.1ScalarirClusterCfgStatusread-onlycurrentThis indicates whether cluster config feature is enabled or disabled.
1.3.6.1.4.1.33.100.1.4.1.2ScalarirClusterNameread-writecurrentThe name assigned to the cluster.
1.3.6.1.4.1.33.100.1.4.1.3ScalarirClusterSyncStatusread-onlycurrentThe cluster synch update status.
1.3.6.1.4.1.33.100.1.4.1.4ScalarirClusterActionread-writecurrentA read of this object always returns the value other(1). Setting this obejct to flushAll(2) will delete all entries configured in the irClusterTable.
1.3.6.1.4.1.33.100.1.4.2TableirClusterTablenot-accessiblecurrentA list of cluster config entries.
1.3.6.1.4.1.33.100.1.4.2.1RowirClusterEntrynot-accessiblecurrentA cluster config entry.
1.3.6.1.4.1.33.100.1.4.2.1.1ColumnirClusterIpAddrread-onlycurrentThe IP address of the cluster entry.
1.3.6.1.4.1.33.100.1.4.2.1.2ColumnirClusterStatusread-createcurrentThe row status value for the entry.
1.3.6.1.4.1.33.100.1.5NodeirEthernet
1.3.6.1.4.1.33.100.1.5.1TableirEnetPortConfigTablenot-accessiblecurrentA list of ethernet port config entries.
1.3.6.1.4.1.33.100.1.5.1.1RowirEnetPortConfigEntrynot-accessiblecurrentAn ethernet port config entry.
1.3.6.1.4.1.33.100.1.5.1.1.1ColumnirEnetPortIndexread-onlycurrentThe port index for this enthernet port entry.
1.3.6.1.4.1.33.100.1.5.1.1.2ColumnirEnetPortSpeedread-onlycurrentThe port speed.
1.3.6.1.4.1.33.100.1.5.1.1.3ColumnirEnetPortDuplexModeread-onlycurrentThe port duplex mode.
1.3.6.1.4.1.33.100.1.5.1.1.4ColumnirEnetPortAutoNegotiationread-onlycurrentThe port auto negotiation mode.
1.3.6.1.4.1.33.100.1.5.1.1.5ColumnirEnetPortPhysMediaread-onlycurrentThe physical media type.
1.3.6.1.4.1.33.100.1.5.1.1.6ColumnirEnetPortLinkStatusread-onlycurrentThe ethernet port link status.
1.3.6.1.4.1.33.100.1.5.1.1.7ColumnirEnetPortBondingStatusread-onlycurrentThe ethernet port bonding status. For systems with only a single ethernet port, the value will always be none(1).
1.3.6.1.4.1.33.100.1.5.2TableirEnetPortStatsTablenot-accessiblecurrentA list of ethernet port stats entries.
1.3.6.1.4.1.33.100.1.5.2.1RowirEnetPortStatsEntrynot-accessiblecurrentAn ethernet port stats entry.
1.3.6.1.4.1.33.100.1.5.2.1.1ColumnirEnetPortRecvBytesread-onlycurrentThe number of bytes received on this port.
1.3.6.1.4.1.33.100.1.5.2.1.2ColumnirEnetPortRecvPacketsread-onlycurrentThe number of packets received on this port.
1.3.6.1.4.1.33.100.1.5.2.1.3ColumnirEnetPortRecvErrorsread-onlycurrentThe number of packets received with error.
1.3.6.1.4.1.33.100.1.5.2.1.4ColumnirEnetPortRecvDroppedread-onlycurrentThe number of received packets dropped.
1.3.6.1.4.1.33.100.1.5.2.1.5ColumnirEnetPortRecvOverrunsread-onlycurrentThe number of received packets that ran out of buffers.
1.3.6.1.4.1.33.100.1.5.2.1.6ColumnirEnetPortRecvFrameErrorsread-onlycurrentThe number of packets received with frame errors.
1.3.6.1.4.1.33.100.1.5.2.1.7ColumnirEnetPortRecvMulticastread-onlycurrentThe number of received multicast packets.
1.3.6.1.4.1.33.100.1.5.2.1.8ColumnirEnetPortRecvCompressedread-onlycurrentThe number of received compressed packets.
1.3.6.1.4.1.33.100.1.5.2.1.9ColumnirEnetPortXmitBytesread-onlycurrentThe number of bytes transmitted on this port.
1.3.6.1.4.1.33.100.1.5.2.1.10ColumnirEnetPortXmitPacketsread-onlycurrentThe number of packets transmitted on this port.
1.3.6.1.4.1.33.100.1.5.2.1.11ColumnirEnetPortXmitErrorsread-onlycurrentThe number of packets that encountered an error on transmission.
1.3.6.1.4.1.33.100.1.5.2.1.12ColumnirEnetPortXmitDroppedread-onlycurrentThe number of packets that were dropped due to transmit errors.
1.3.6.1.4.1.33.100.1.5.2.1.13ColumnirEnetPortXmitOverrunsread-onlycurrentThe number of packets that ran out of buffers.
1.3.6.1.4.1.33.100.1.5.2.1.14ColumnirEnetPortXmitCollisionsread-onlycurrentThe number of packets that encountered collisions on transmission.
1.3.6.1.4.1.33.100.1.5.2.1.15ColumnirEnetPortXmitCompressedread-onlycurrentThe number of transmitted compressed packets.
1.3.6.1.4.1.33.100.1.5.2.1.16ColumnirEnetPortXmitCarrierread-onlycurrentThe number of transmitted carrier errors.
1.3.6.1.4.1.33.100.1.6NodeirPower
1.3.6.1.4.1.33.100.1.6.1TableirPowerSupplyTablenot-accessiblecurrentA list of power supply entries.
1.3.6.1.4.1.33.100.1.6.1.1RowirPowerSupplyEntrynot-accessiblecurrentA power supply entry.
1.3.6.1.4.1.33.100.1.6.1.1.1ColumnirPowerIndexread-onlycurrentThe index of the power unit.
1.3.6.1.4.1.33.100.1.6.1.1.2ColumnirPowerUnitPresentread-onlycurrentThis indicates if the power unit is present or not.
1.3.6.1.4.1.33.100.1.6.1.1.3ColumnirPowerInputStatusread-onlycurrentThis indicates if the power unit is plugged into a power source.
1.3.6.1.4.1.33.100.1.6.1.1.4ColumnirPowerOutputStatusread-onlycurrentThis indicates the status of the internal power feed to the device components.
1.3.6.1.4.1.33.100.1.6.1.1.5ColumnirPowerStatusread-onlycurrentThe overall status of the power unit.
1.3.6.1.4.1.33.100.1.6.1.1.6ColumnirPowerInputVoltageread-onlycurrentThe input voltage reading.
1.3.6.1.4.1.33.100.1.6.1.1.7ColumnirPowerOutputVoltageread-onlycurrentThe output voltage reading.
1.3.6.1.4.1.33.100.1.7NodeirInterfaces
1.3.6.1.4.1.33.100.1.7.1TableirIfTablenot-accessiblecurrentA list of IP interface entries.
1.3.6.1.4.1.33.100.1.7.1.1RowirIfEntrynot-accessiblecurrentAn IP interface entry.
1.3.6.1.4.1.33.100.1.7.1.1.1ColumnirIfIndexread-onlycurrentThe index for this interface entry.
1.3.6.1.4.1.33.100.1.7.1.1.2ColumnirIfIpAddressread-onlycurrentThe IP address assigned to this interface.
1.3.6.1.4.1.33.100.1.7.1.1.3ColumnirIfIpSubnetMaskread-onlycurrentThe subnet mask assigned to this interface.
1.3.6.1.4.1.33.100.1.7.1.1.4ColumnirIfIpBcastAddressread-onlycurrentThe broadcast address assigned to this interface.
1.3.6.1.4.1.33.100.1.7.1.1.5ColumnirIfMturead-onlycurrentThe MTU size assigned to this interface.
1.3.6.1.4.1.33.100.1.7.1.1.6ColumnirIfNameread-onlycurrentThe name string assigned to this interface.
1.3.6.1.4.1.33.100.1.7.1.1.7ColumnirIfBoundToread-onlycurrentThe name of the physical interface to which this interface is bound.
1.3.6.1.4.1.33.100.1.7.1.1.8ColumnirIfTelnetPortread-onlycurrentThe telnet port to use when connecting via this interface.
1.3.6.1.4.1.33.100.1.7.1.1.9ColumnirIfSshPortread-onlycurrentThe ssh port to use when connecting via this interface.
1.3.6.1.4.1.33.100.1.8NodeirTar
1.3.6.1.4.1.33.100.1.8.1NodeirTarSys
1.3.6.1.4.1.33.100.1.8.1.1ScalartarNextFreeTrigIndexread-onlycurrentThe next free index in the trigger table.
1.3.6.1.4.1.33.100.1.8.1.2ScalartarNextFreeActionIndexread-onlycurrentThe next free index in the trigger action table.
1.3.6.1.4.1.33.100.1.8.1.3ScalartarNextFreeRuleIndexread-onlycurrentThe next free index in the trigger rule table.
1.3.6.1.4.1.33.100.1.8.2NodeirTarTable
1.3.6.1.4.1.33.100.1.8.2.1TabletarTrigTablenot-accessiblecurrentA list of trigger entries.
1.3.6.1.4.1.33.100.1.8.2.1.1RowtarTrigEntrynot-accessiblecurrentA trigger entry.
1.3.6.1.4.1.33.100.1.8.2.1.1.1ColumntarTrigIndexread-onlycurrentThe index for this trigger entry.
1.3.6.1.4.1.33.100.1.8.2.1.1.2ColumntarTrigNameread-writecurrentThe name assigned to this trigger.
1.3.6.1.4.1.33.100.1.8.2.1.1.3ColumntarTrigTyperead-writecurrentThe type of trigger.
1.3.6.1.4.1.33.100.1.8.2.1.1.4ColumntarTrigCreatorread-onlycurrentThe creator of this trigger.
1.3.6.1.4.1.33.100.1.8.2.1.1.5ColumntarTrigRowStatusread-writecurrentThe row status for this trigger.
1.3.6.1.4.1.33.100.1.8.2.2TabletarActionTablenot-accessiblecurrentA list of trigger action entries.
1.3.6.1.4.1.33.100.1.8.2.2.1RowtarActionEntrynot-accessiblecurrentA trigger action entry.
1.3.6.1.4.1.33.100.1.8.2.2.1.1ColumntarActionIndexread-onlycurrentThe index for this action entry.
1.3.6.1.4.1.33.100.1.8.2.2.1.2ColumntarActionNameread-writecurrentThe name string assigned to this action.
1.3.6.1.4.1.33.100.1.8.2.2.1.3ColumntarActionCommandread-writecurrentThe command string assigned to this action.
1.3.6.1.4.1.33.100.1.8.2.2.1.4ColumntarActionCreatorread-onlycurrentThe creator of this trigger.
1.3.6.1.4.1.33.100.1.8.2.2.1.5ColumntarActionRowStatusread-writecurrentThe status for this action entry.
1.3.6.1.4.1.33.100.1.8.2.3TabletarRuleTablenot-accessiblecurrentA list of trigger rule entries.
1.3.6.1.4.1.33.100.1.8.2.3.1RowtarRuleEntrynot-accessiblecurrentA trigger rule entry.
1.3.6.1.4.1.33.100.1.8.2.3.1.1ColumntarRuleIndexread-onlycurrentThe index for this rule entry.
1.3.6.1.4.1.33.100.1.8.2.3.1.2ColumntarRuleNameread-writecurrentThe name string assigned to this rule.
1.3.6.1.4.1.33.100.1.8.2.3.1.3ColumntarRuleTrigIdread-writecurrentThe trigger index entry to which this rule is attached.
1.3.6.1.4.1.33.100.1.8.2.3.1.4ColumntarRuleActionIdread-writecurrentThe trigger action entry to which this rule is attached.
1.3.6.1.4.1.33.100.1.8.2.3.1.5ColumntarRuleStatusread-writecurrentThe status for this entry.
1.3.6.1.4.1.33.100.1.8.2.3.1.6ColumntarRuleExecCountread-onlycurrentThe number of times the action command for this rule has been executed since the system was started.
1.3.6.1.4.1.33.100.1.8.2.3.1.7ColumntarRuleErrorCountread-onlycurrentThe number of times the execution of this rule has resulted in an error.
1.3.6.1.4.1.33.100.1.8.2.3.1.8ColumntarRuleCreatorread-onlycurrentThe creator of this rule.
1.3.6.1.4.1.33.100.1.8.2.3.1.9ColumntarRuleRowStatusread-writecurrentThe row status for this entry.
1.3.6.1.4.1.33.100.1.8.2.4TabletarTempTrigTablenot-accessiblecurrentA list of temp trigger entries.
1.3.6.1.4.1.33.100.1.8.2.4.1RowtarTempTrigEntrynot-accessiblecurrentA temp trigger entry.
1.3.6.1.4.1.33.100.1.8.2.4.1.1ColumntarTempTrigPortread-writecurrentThe port to which this trigger is attached.
1.3.6.1.4.1.33.100.1.8.2.4.1.2ColumntarTempTrigOperatorread-writecurrentThe logical operator for this trigger.
1.3.6.1.4.1.33.100.1.8.2.4.1.3ColumntarTempTrigThresholdValueread-writecurrentThe threshold value for this trigger.
1.3.6.1.4.1.33.100.1.8.2.4.1.4ColumntarTempTrigUnitsread-writecurrentThe units for the threshold value.
1.3.6.1.4.1.33.100.1.8.2.4.1.5ColumntarTempTrigHysteresisread-writecurrentThe hysteresis value for this trigger.
1.3.6.1.4.1.33.100.1.8.2.6TabletarSigTrigTablenot-accessiblecurrentA list of signal trigger entries.
1.3.6.1.4.1.33.100.1.8.2.6.1RowtarSigTrigEntrynot-accessiblecurrentA signal trigger entry.
1.3.6.1.4.1.33.100.1.8.2.6.1.1ColumntarSigTrigPortread-writecurrentThe port to which this trigger is attached.
1.3.6.1.4.1.33.100.1.8.2.6.1.2ColumntarSigTrigSignalread-writecurrentThe input signal type being monitored.
1.3.6.1.4.1.33.100.1.8.2.6.1.3ColumntarSigTrigStateread-writecurrentThe signal state that will cause the action to be taken.
1.3.6.1.4.1.33.100.1.9NodeirIpmi
1.3.6.1.4.1.33.100.1.9.1NodeirIpmiSys
1.3.6.1.4.1.33.100.1.9.1.1ScalaripmiDiscreteOffsetread-onlycurrentThe offset within the discrete sensor for which the event occurred.
1.3.6.1.4.1.33.100.1.9.1.2ScalaripmiDiscreteSensorNameread-onlycurrentAn Ascii string indicating the name of the IPMI discrete sensor for which the event occurred.
1.3.6.1.4.1.33.100.1.9.1.3ScalaripmiThresholdTyperead-onlycurrentThe type of threshold sensor event.
1.3.6.1.4.1.33.100.1.9.1.4ScalaripmiThresholdSensorNameread-onlycurrentAn Ascii string indicating the name of the IPMI threshold sensor for which the event occurred.
1.3.6.1.4.1.33.100.1.9.1.5ScalaripmiThresholdDirectionread-onlycurrentThe direction of the threshold sensor event.
1.3.6.1.4.1.33.100.1.9.1.6ScalaripmiThresholdAssertread-onlycurrentThe assertion value of the threshold sensor event.
MIB Viewer