MWR-ETHERNET-MIB
619 objects
This specifies the contact information and the revision tracking information for the MIB module version.
Imported Objects
| DWI-HARMONY-PRIVATE-MIB | mwr |
| EQUIPMENT-COMMON-MIB | EnableType equipmentAlarmActiveConditionId equipmentOutTrapsCounter equipmentTrapInfo |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7262.4.5.1 | NodemwrPlatformObjId | |||
| 1.3.6.1.4.1.7262.4.5.1.1 | NodemwrEbandObjId | |||
| 1.3.6.1.4.1.7262.4.5.1.2 | NodemwrEnhancedObjId | |||
| 1.3.6.1.4.1.7262.4.5.2 | NodemwrSystem | |||
| 1.3.6.1.4.1.7262.4.5.2.1 | NodemwrSystemConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.2.1.1 | ScalarmwrSystemType | read-write | current | Available system types for single carrier and multi carriers systems are: onePlusZero1cr - 1+0 single carrier onePlusZero2cr - 1+0 dual carriers onePlusZero2cr… |
| 1.3.6.1.4.1.7262.4.5.2.1.2 | ScalarmwrPacketSwitchMode | read-write | current | In bridge mode the system is always inband managed on any of the user ports. However in port-isolation mode, the system can be managed outOfBand or inband on a… |
| 1.3.6.1.4.1.7262.4.5.2.1.3 | NodemwrSysSpeed | |||
| 1.3.6.1.4.1.7262.4.5.2.1.3.1 | ScalarmwrSystemCurrentSpeed | read-write | current | Changes the working speed of the system. |
| 1.3.6.1.4.1.7262.4.5.2.2 | NodemwrSystemStatus | |||
| 1.3.6.1.4.1.7262.4.5.2.2.1 | ScalarmwrSystemOperStatus | read-only | current | The current operational state of the system. |
| 1.3.6.1.4.1.7262.4.5.2.2.2 | ScalarmwrSystemFaultSeverity | read-only | current | The current state of the most serious system alarm severity. If system is running diagnostics, the status will be test. |
| 1.3.6.1.4.1.7262.4.5.2.2.3 | ScalarmwrSystemTemperature | read-only | current | The current system temperature. |
| 1.3.6.1.4.1.7262.4.5.2.2.4 | ScalarmwrPlatformType | read-only | current | Identifies the system platform type. The possible system types are: - eband - enhanced - enhanced-mc |
| 1.3.6.1.4.1.7262.4.5.2.2.5 | ScalarmwrPacketSwitchModeStatus | read-only | current | This object indicates the running configuration for the packet switch mode. |
| 1.3.6.1.4.1.7262.4.5.2.2.6 | ScalarmwrSystemTypeStatus | read-only | current | This object indicates the running configuration for the system type status. |
| 1.3.6.1.4.1.7262.4.5.2.3 | NodemwrSystemCommands | |||
| 1.3.6.1.4.1.7262.4.5.2.3.1 | ScalarmwrResetSystem | read-write | current | Writing '1' to this object resets the system. |
| 1.3.6.1.4.1.7262.4.5.2.3.2 | ScalarmwrSaveConfig | read-write | current | Writing '1' or 'save' to this object saves running configuration of the system. |
| 1.3.6.1.4.1.7262.4.5.2.3.3 | ScalarmwrDeleteConfig | read-write | current | Using this object, either the startup config or the switch config can be deleted. Deleting startup config removes all system configuration for next system rest… |
| 1.3.6.1.4.1.7262.4.5.2.4 | NodemwrSystemInventory | |||
| 1.3.6.1.4.1.7262.4.5.2.4.1 | NodemwrHwInventory | |||
| 1.3.6.1.4.1.7262.4.5.2.4.1.1 | ScalarmwrMacAddress | read-only | current | The MAC Address of the system. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.2 | ScalarmwrTargetCfgFilePartNumber | read-only | current | A textual string containing part number of the target configuration file. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.3 | ScalarmwrUnitSerialNo | read-only | current | A textual string containing Serial Number of the Unit. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.4 | ScalarmwrUnitAssemblyNo | read-only | current | A textual string containing the Assembly Number of the Unit. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.5 | ScalarmwrBasebandSerialNo | read-only | current | A textual string containing Serial no of the baseband. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.6 | ScalarmwrBasebandAssemblyNo | read-only | current | A textual string containing assembly no of the baseband. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.7 | ScalarmwrPsuSerialNo | read-only | current | A textual string containing Serial no of the PSU. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.8 | ScalarmwrPsuAssemblyNo | read-only | current | A textual string containing assembly no of the PSU. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.9 | ScalarmwrRfSerialNo | read-only | current | A textual string containing Serial no of the RF. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.10 | ScalarmwrRfAssemblyNo | read-only | current | A textual string containing assembly no of the RF. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.11 | ScalarmwrRfRevisionNo | read-only | current | A textual string containing revision no of the RF. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.12 | ScalarmwrDiplexerSerialNo | read-only | current | A textual string containing Serial no of the Diplexer. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.13 | ScalarmwrDiplexerAssemblyNo | read-only | current | A textual string containing assembly no of the Diplexer. |
| 1.3.6.1.4.1.7262.4.5.2.4.1.14 | ScalarmwrSystemCleiNo | read-only | current | A textual string containing system CLEI code. |
| 1.3.6.1.4.1.7262.4.5.2.4.2 | NodemwrSwInventory | |||
| 1.3.6.1.4.1.7262.4.5.2.4.2.1 | TablemwrSwInventoryTable | not-accessible | current | Table containing the software inventory. |
| 1.3.6.1.4.1.7262.4.5.2.4.2.1.1 | RowmwrSwInventoryEntry | not-accessible | current | Software inventory entry. |
| 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.1 | ColumnmwrSwInvBank | not-accessible | current | Software bank in the flash. |
| 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.2 | ColumnmwrSwInvStatus | read-only | current | Software bank status. |
| 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.3 | ColumnmwrSwInvOmniRelease | read-only | current | The version number of the Omni. |
| 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.4 | ColumnmwrSwInvTargetConfFileVersion | read-only | current | The version number of the target configuration file. |
| 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.5 | ColumnmwrSwInvMibVersion | read-only | current | The version number of the system MIB. |
| 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.6 | ColumnmwrSwInvSecurityVersion | read-only | current | The version number of the security package. |
| 1.3.6.1.4.1.7262.4.5.2.5 | NodemwrSystemNotifications | |||
| 1.3.6.1.4.1.7262.4.5.2.5.1 | NotificationmwrSysTcfInvalid | current | This notification is raised when The HW specific factory defined information (TCF) in the system is not valid. | |
| 1.3.6.1.4.1.7262.4.5.2.5.2 | NotificationmwrSysTempOutOfLimit | current | This notification is raised when the system temperature is out of limits. | |
| 1.3.6.1.4.1.7262.4.5.3 | NodemwrSoftware | |||
| 1.3.6.1.4.1.7262.4.5.3.1 | NodemwrSoftwareConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.3.2 | NodemwrSoftwareStatus | |||
| 1.3.6.1.4.1.7262.4.5.3.2.1 | ScalarmwrSwBackupBankStatus | read-only | current | This object represents the status of the backup bank. |
| 1.3.6.1.4.1.7262.4.5.3.3 | NodemwrSoftwareCommands | |||
| 1.3.6.1.4.1.7262.4.5.3.3.1 | ScalarmwrSwCommit | read-write | current | Writing '1' to this object commits all the active bank settings to the backup bank. |
| 1.3.6.1.4.1.7262.4.5.3.3.2 | ScalarmwrSwSwitchBanks | read-write | current | This objects switches bank to the specified bank. Next time the system resets, it loads up from that bank. |
| 1.3.6.1.4.1.7262.4.5.3.4 | NodemwrSoftwareNotifications | |||
| 1.3.6.1.4.1.7262.4.5.4 | NodemwrLicensing | |||
| 1.3.6.1.4.1.7262.4.5.4.1 | NodemwrLicensingConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.4.1.1 | ScalarmwrLicenseUpgradeKey | read-write | current | The 33 Bytes licensing key used for upgrading features/capacity. Reading this object always returns an empty string. |
| 1.3.6.1.4.1.7262.4.5.4.2 | NodemwrLicensingStatus | |||
| 1.3.6.1.4.1.7262.4.5.4.2.1 | ScalarmwrLicenseCount | read-only | current | This object indicates the number of times the system has been upgraded/downgraded with features/capacity. |
| 1.3.6.1.4.1.7262.4.5.4.2.2 | ScalarmwrLicensedSpeed | read-only | current | This object indicates the system licensed speed. |
| 1.3.6.1.4.1.7262.4.5.4.2.3 | TablemwrLicenseFeaturesTable | not-accessible | current | A table containing supported system licensed features. |
| 1.3.6.1.4.1.7262.4.5.4.2.3.1 | RowmwrLicenseFeaturesEntry | not-accessible | current | A table entry containing supported system licensed features. |
| 1.3.6.1.4.1.7262.4.5.4.2.3.1.1 | ColumnmwrLicenseFeatureIndex | not-accessible | current | This object indicates the list of system features. |
| 1.3.6.1.4.1.7262.4.5.4.2.3.1.2 | ColumnmwrLicenseFeatureId | read-only | current | 2 ACM (includes WMA where applicable) (LF2) 3 Ethernet UNI (ELINE/ELAN MEF service) (LF3) 4 Packet Fragmentation (LF4) 5 Secured Access (LF5) 6 Ethernet OAM (8… |
| 1.3.6.1.4.1.7262.4.5.4.2.3.1.3 | ColumnmwrLicenseFeature | read-only | current | The name of the feature. |
| 1.3.6.1.4.1.7262.4.5.4.2.3.1.4 | ColumnmwrLicenseFeatureStatus | read-only | current | Specifies whether the feature is unlicensed or licensed. |
| 1.3.6.1.4.1.7262.4.5.5 | NodemwrSyncE | |||
| 1.3.6.1.4.1.7262.4.5.5.1 | NodemwrSyncEConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.5.1.1 | ScalarmwrSyncEState | read-write | current | In manual mode, SyncE source will use primary clock source and when the primary source has loss of lock, the SyncE goes into holdover. The primary source will … |
| 1.3.6.1.4.1.7262.4.5.5.1.2 | ScalarmwrSyncEPrimarySource | read-write | current | Selects which port to be used as SyncE master clock source. |
| 1.3.6.1.4.1.7262.4.5.5.1.3 | ScalarmwrSyncESecondarySource | read-write | current | Selects which port to be used as SyncE clock source when the master SyncE clock source is not available. |
| 1.3.6.1.4.1.7262.4.5.5.1.4 | ScalarmwrSyncEMemberPorts | read-write | current | Enter a string indicating all SyncE member ports. Example: gi01 gi04 Port options: gi01 gi02 gi03 gi04 radio |
| 1.3.6.1.4.1.7262.4.5.5.1.5 | ScalarmwrSyncEForcedHoldover | read-write | current | This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be taken out. The forced timeout can be 0 to 300sec, where… |
| 1.3.6.1.4.1.7262.4.5.5.1.6 | ScalarmwrSyncERevertive | read-write | current | In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time… |
| 1.3.6.1.4.1.7262.4.5.5.1.7 | ScalarmwrSyncEWanderFilter | read-write | current | ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hierarchy , option1, vs those based on the 1.544kbit/s hierarc… |
| 1.3.6.1.4.1.7262.4.5.5.2 | NodemwrSyncEStatus | |||
| 1.3.6.1.4.1.7262.4.5.5.2.1 | ScalarmwrSyncEClockSource | read-only | current | Retrieves SyncE clock source currently in use. |
| 1.3.6.1.4.1.7262.4.5.5.2.2 | ScalarmwrSyncEAcquisitionStatus | read-only | current | Retrieves SyncE acquisition status. |
| 1.3.6.1.4.1.7262.4.5.5.3 | NodemwrSyncENotifications | |||
| 1.3.6.1.4.1.7262.4.5.5.3.1 | NotificationmwrSynceLostLock | current | This notification is raised when system has lost synchronization to syncE clock source. | |
| 1.3.6.1.4.1.7262.4.5.5.3.2 | NotificationmwrSynceSecondarySourceInUse | current | This notification is raised whens ystem has lost synchronization to primary syncE clock source, and now synchronized to secondary source. | |
| 1.3.6.1.4.1.7262.4.5.5.3.3 | NotificationmwrSynceConfigMismatch | current | This notification is raised when the configuration of syncE between the peers in the radio link is mismatched. | |
| 1.3.6.1.4.1.7262.4.5.6 | NodemwrTiming | |||
| 1.3.6.1.4.1.7262.4.5.6.1 | NodemwrTimingConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.6.1.1 | ScalarmwrDateTime | read-write | current | The system date and time. |
| 1.3.6.1.4.1.7262.4.5.6.1.2 | ScalarmwrSntpEnable | read-write | current | Indicates whether SNTP feature is enabled. |
| 1.3.6.1.4.1.7262.4.5.6.1.3 | ScalarmwrSntpOffset | read-write | current | System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour. |
| 1.3.6.1.4.1.7262.4.5.6.1.4 | TablemwrSntpServerTable | not-accessible | current | Table containing SNTP server entries |
| 1.3.6.1.4.1.7262.4.5.6.1.4.1 | RowmwrSntpServerEntry | not-accessible | current | Contains the SNTP server information |
| 1.3.6.1.4.1.7262.4.5.6.1.4.1.1 | ColumnmwrSntpServerIndex | not-accessible | current | A unique value for each server. |
| 1.3.6.1.4.1.7262.4.5.6.1.4.1.2 | ColumnmwrSntpServerDomain | read-write | current | Indicates SNTP server inet address type. Valid types are ipv4 or ipv6. |
| 1.3.6.1.4.1.7262.4.5.6.1.4.1.3 | ColumnmwrSntpServerAddress | read-write | current | Indicates SNTP server inet address octet string. |
| 1.3.6.1.4.1.7262.4.5.6.1.4.1.4 | ColumnmwrSntpServerStatus | read-only | current | The status of the SNTP server. |
| 1.3.6.1.4.1.7262.4.5.6.1.4.1.5 | ColumnmwrSntpServerStratum | read-only | current | Specifies the stratum of a server, 0 for failed server |
| 1.3.6.1.4.1.7262.4.5.6.2 | NodemwrTimingStatus | |||
| 1.3.6.1.4.1.7262.4.5.6.2.1 | ScalarmwrTimingLastDateTimeChanged | read-only | current | Date and Time for the last system time adjustment. |
| 1.3.6.1.4.1.7262.4.5.6.2.2 | ScalarmwrTimingLastTimeAdjustment | read-only | current | Last system time adjustment in hundredths of seconds. |
| 1.3.6.1.4.1.7262.4.5.6.2.3 | ScalarmwrTimingCummulativeTimeChange | read-only | current | Cumulative system time adjustment in hundredths of seconds. |
| 1.3.6.1.4.1.7262.4.5.6.3 | NodemwrTimingCommands | |||
| 1.3.6.1.4.1.7262.4.5.6.3.1 | ScalarmwrSntpRestoreDefault | read-write | current | Restores SNTP servers to default Addresses. |
| 1.3.6.1.4.1.7262.4.5.6.4 | NodemwrTimingNotifications | |||
| 1.3.6.1.4.1.7262.4.5.6.4.1 | NotificationmwrSntpServerUnreachable | current | This notification is raised when one or more of the configured SNTP server is not reachable by the system. | |
| 1.3.6.1.4.1.7262.4.5.6.4.2 | NotificationmwrSystemTimeCorrected | current | This notification is raised change in system time is detected, and system time is adjusted | |
| 1.3.6.1.4.1.7262.4.5.7 | NodemwrAAA | |||
| 1.3.6.1.4.1.7262.4.5.7.1 | NodemwrAAAConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.7.1.1 | ScalarmwrAAAUserAuthentication | read-write | current | This object configures the user authentication method. |
| 1.3.6.1.4.1.7262.4.5.7.1.2 | NodemwrRadiusConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.7.1.2.1 | ScalarmwrRadiusAdminUserStrict | read-write | current | If strict mode is off, the admin user can login when radius is turned off or unreachable. When strict mode is on, admin user will only be authenticated against… |
| 1.3.6.1.4.1.7262.4.5.7.1.2.2 | ScalarmwrRadiusServerTimeOut | read-write | current | Timeout period for authentication requests |
| 1.3.6.1.4.1.7262.4.5.7.1.2.3 | ScalarmwrRadiusServerDeadTime | read-write | current | Time to declare an unresponsive server 'dead' |
| 1.3.6.1.4.1.7262.4.5.7.1.2.4 | ScalarmwrRadiusServerReTransmit | read-write | current | Maximum number of retransmits to an unresponsive server |
| 1.3.6.1.4.1.7262.4.5.7.1.2.5 | TablemwrRadiusServerTable | not-accessible | current | Table containing radius server entries |
| 1.3.6.1.4.1.7262.4.5.7.1.2.5.1 | RowmwrRadiusServerEntry | not-accessible | current | Contains the SNTP server information |
| 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.1 | ColumnmwrRadiusServerIndex | not-accessible | current | A unique value for each radius server. |
| 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.2 | ColumnmwrRadiusCfgdHostDomain | read-write | current | Indicates configured radius inet address type. Valid types are ipv4 or ipv6. |
| 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.3 | ColumnmwrRadiusCfgdHostAddress | read-write | current | Indicates configured radius server inet address octet string. |
| 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.4 | ColumnmwrRadiusCfgdHostKey | read-write | current | The key of the configured radius server. |
| 1.3.6.1.4.1.7262.4.5.8 | NodemwrNetworking | |||
| 1.3.6.1.4.1.7262.4.5.8.1 | NodemwrNetworkingConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.8.1.1 | NodemwrNetMgmtPriority | |||
| 1.3.6.1.4.1.7262.4.5.8.1.1.1 | ScalarmwrNetMgmtVlanPriority | read-write | current | The object configures the VLAN priority(0...7) |
| 1.3.6.1.4.1.7262.4.5.8.1.1.2 | ScalarmwrNetMgmtDscp | read-write | current | The Differentiated Services Code Point (DSCP) of IP traffic generated by the system (0...63) |
| 1.3.6.1.4.1.7262.4.5.8.1.2 | NodemwrNetMgmtIpv4 | |||
| 1.3.6.1.4.1.7262.4.5.8.1.2.1 | TablemwrIpv4Table | not-accessible | current | A table containing the IPv4 information. |
| 1.3.6.1.4.1.7262.4.5.8.1.2.1.1 | RowmwrIpv4Entry | not-accessible | current | A table entry containing the IPv4 information. |
| 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.1 | ColumnmwrIpv4Index | not-accessible | current | The IPv4 table index. There is only one entry in this table and can not be deleted. |
| 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.2 | ColumnmwrIpv4Address | read-write | current | The IPv4 address of the system. |
| 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.3 | ColumnmwrIpv4SubnetMask | read-write | current | The IPv4 subnet mask of the system. |
| 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.4 | ColumnmwrIpv4DefaultGateway | read-write | current | The IPv4 default gateway of the system. |
| 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.5 | ColumnmwrIpv4RowStatus | read-write | current | This object is used for applying ipv4 configuration attributes simultaneously. |
| 1.3.6.1.4.1.7262.4.5.8.1.2.2 | ScalarmwrSecondaryGateway | read-write | current | The IPv4 secondary gateway of the system. |
| 1.3.6.1.4.1.7262.4.5.8.1.3 | NodemwrNetMgmttIpv6 | |||
| 1.3.6.1.4.1.7262.4.5.8.1.3.1 | TablemwrIpv6Table | not-accessible | current | A table containing the IPv6 information. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1 | RowmwrIpv6Entry | not-accessible | current | A table entry containing the IPv6 information. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.1 | ColumnmwrIpv6Index | not-accessible | current | The IPv6 table index. There is only one entry in this table and can not be deleted. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.2 | ColumnmwrIpv6Domain | read-only | current | Indicates ipv6 inet address type. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.3 | ColumnmwrIpv6Address | read-write | current | Indicates IPv6 inet address octet string. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.4 | ColumnmwrIpv6Prefix | read-write | current | Indicates ipv6 prefix. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.5 | ColumnmwrIpv6GatewayDomain | read-only | current | Indicates IPv6 gateway inet address type. This will always return IPv6 inet address type. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.6 | ColumnmwrIpv6GatewayAddress | read-write | current | Indicates IPv6 gateway inet address octet string. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.7 | ColumnmwrIpv6RowStatus | read-write | current | This object is used for applying IPv6 configuration attributes simultaneously. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.2 | ScalarmwrSecondaryIpv6GatewayDomain | read-only | current | This object will return the secondary IPv6 gateway inet address type. |
| 1.3.6.1.4.1.7262.4.5.8.1.3.3 | ScalarmwrSecondaryIpv6GatewayAddress | read-write | current | This object will return the secondary IPv6 gateway inet address. |
| 1.3.6.1.4.1.7262.4.5.8.1.4 | NodemwrUserInterfaceMgmt | |||
| 1.3.6.1.4.1.7262.4.5.8.1.4.1 | ScalarmwrTelnetEnable | read-write | current | Indicates whether telnet access is allowed. |
| 1.3.6.1.4.1.7262.4.5.8.1.4.2 | ScalarmwrSshEnable | read-write | current | Indicates whether ssh access is allowed. This configuration only applies to security mode. |
| 1.3.6.1.4.1.7262.4.5.8.1.4.3 | ScalarmwrHttpEnable | read-write | current | Indicates whether http is enabled. |
| 1.3.6.1.4.1.7262.4.5.8.1.4.4 | ScalarmwrHttpsEnable | read-write | current | Indicates whether secured http access is allowed. This configuration only applies to security mode. |
| 1.3.6.1.4.1.7262.4.5.8.1.4.5 | ScalarmwrSnmpv1v2cEnable | read-write | current | Indicates whether SNMP v1/v2c is allowed in security mode. This configuration only applies to security mode. |
| 1.3.6.1.4.1.7262.4.5.8.1.4.6 | ScalarmwrFtpEnable | read-write | current | This object allows enabling or disabling ftp when in secure mode. By default ftp is enabled. |
| 1.3.6.1.4.1.7262.4.5.8.1.5 | NodemwrFileTransfer | |||
| 1.3.6.1.4.1.7262.4.5.8.1.5.1 | ScalarmwrFileXfrDirection | read-write | current | The behavior of the FTP/SFTP machine: 1 - ServerMode 2 - ClientMode 3 - both Server and Client available Mwr 1.0 just supports Client Mode. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2 | TablemwrFileXfrTable | not-accessible | current | Table containing the FTP client parameters. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1 | RowmwrFileXfrEntry | not-accessible | current | Table entry containing the FTP client parameters. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.1 | ColumnmwrFileXfrSeqID | not-accessible | current | For the same manager, the possibility to define different FTP/SFTP transfer actions. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.2 | ColumnmwrFileXfrIdentifier | read-create | current | The identifier of the type of file to be imported/exported. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.3 | ColumnmwrFileXfrName | read-create | current | The Name of the file to be imported/exported. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.4 | ColumnmwrFileXfrMode | read-create | current | The file transfer mode specifying either a ftp or sftp request. The sftp mode is only supported when security is licensed/installed. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.5 | ColumnmwrFileXfrServerDomain | read-create | current | The server domain such as IPv4 or IPv6 type. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.6 | ColumnmwrFileXfrServerAddress | read-create | current | The server IP address in InetAddress format which could be an IPv4 or IPv6 address. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.7 | ColumnmwrFileXfrClientDirection | read-create | current | The behavior of the FTP or SFTP Client: 1 - import, i.e. download data file 2 - export, i.e. upload data file. The only supported option for omni and tcf is im… |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.8 | ColumnmwrFileXfrUserName | read-create | current | FTP or SFTP User Name when Client Mode is selected. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.9 | ColumnmwrFileXfrPassword | read-create | current | FTP or SFTP password when Client Mode is selected. For get operation - the returned value will be zero length string. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.10 | ColumnmwrFileXfrNumEntries | read-create | current | This object is used to indicate the number of entries for the performance log to be transferred. If it's set to zero, it will transfer the entire file. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.11 | ColumnmwrFileXfrStatus | read-only | current | This object contains the current status of the last requested import/export of the corresponding row component. |
| 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.12 | ColumnmwrFileXfrRowStatus | read-create | current | The row status variable, used according to: - Manager can create a row using the createAndWait. - Once created, the row is put into notInService by Agent. - On… |
| 1.3.6.1.4.1.7262.4.5.8.1.6 | TablemwrNetMgmtInterfaceTable | not-accessible | current | Table containing the network management interface configurations. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1 | RowmwrNetMgmtInterfaceEntry | not-accessible | current | Entry for the network management interface table. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.1 | ColumnmwrNetMgmtInterfaceIndex | not-accessible | current | This object is an index to network management interface table. There will always be one entry in this table. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.2 | ColumnmwrNetMgmtVlanId | read-write | current | Indicates the VLAN Id (1...4090) |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.3 | ColumnmwrNetMgmtInterface1 | read-write | current | When this object is enabled the gi0/1 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.4 | ColumnmwrNetMgmtInterface1Mode | read-write | current | This object indicates whether the gi0/1 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolat… |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.5 | ColumnmwrNetMgmtInterface1Tagged | read-write | current | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.6 | ColumnmwrNetMgmtInterface2 | read-write | current | When this object is enabled the gi0/2 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.7 | ColumnmwrNetMgmtInterface2Mode | read-write | current | This object indicates whether the gi0/2 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolat… |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.8 | ColumnmwrNetMgmtInterface2Tagged | read-write | current | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.9 | ColumnmwrNetMgmtInterface3 | read-write | current | When this object is enabled the gi0/3 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.10 | ColumnmwrNetMgmtInterface3Mode | read-write | current | This object indicates whether the gi0/3 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolat… |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.11 | ColumnmwrNetMgmtInterface3Tagged | read-write | current | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.12 | ColumnmwrNetMgmtInterface4 | read-write | current | When this object is enabled the gi0/4 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.13 | ColumnmwrNetMgmtInterface4Mode | read-write | current | This object indicates whether the gi0/4 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolat… |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.14 | ColumnmwrNetMgmtInterface4Tagged | read-write | current | This object indicates whether the system will be managed with vlan tagged management traffic or not. |
| 1.3.6.1.4.1.7262.4.5.8.1.6.1.15 | ColumnmwrNetMgmtInterfaceRowStatus | read-write | current | This object is used for applying all management interface configuration in an atomic operation. |
| 1.3.6.1.4.1.7262.4.5.8.2 | NodemwrNetworkingStatus | |||
| 1.3.6.1.4.1.7262.4.5.8.2.1 | NodemwrMaintenanceIpv4 | |||
| 1.3.6.1.4.1.7262.4.5.8.2.1.1 | ScalarmwrMaintenanceIpv4Address | read-only | current | This object indicates the maintenance IPv4 address. |
| 1.3.6.1.4.1.7262.4.5.8.2.1.2 | ScalarmwrMaintenanceSubnetMask | read-only | current | This object indicates the maintenance IPv4 subnet mask. |
| 1.3.6.1.4.1.7262.4.5.8.2.1.3 | ScalarmwrActiveIpv4Gateway | read-only | current | This object indicates the active IPv4 gateway. |
| 1.3.6.1.4.1.7262.4.5.8.2.2 | NodemwrMaintenanceIpv6 | |||
| 1.3.6.1.4.1.7262.4.5.8.2.2.1 | ScalarmwrIpv6LinkLocalIPrefix | read-only | current | This object indicates the IPv6 link local prefix. |
| 1.3.6.1.4.1.7262.4.5.8.2.2.2 | ScalarmwrIpv6LinkLocalAddress | read-only | current | Indicates ipv6 link local inet address octet string. |
| 1.3.6.1.4.1.7262.4.5.8.2.2.3 | ScalarmwrActiveIpv6Gateway | read-only | current | This object indicates the active IPv6 gateway. |
| 1.3.6.1.4.1.7262.4.5.8.3 | NodemwrPeerNetworkingStatus | |||
| 1.3.6.1.4.1.7262.4.5.8.3.1 | ScalarmwrPeerMacAddress | read-only | current | The MAC Address of the peer. |
| 1.3.6.1.4.1.7262.4.5.8.3.2 | ScalarmwrPeerIpv4Address | read-only | current | The peer IPv4 Address. |
| 1.3.6.1.4.1.7262.4.5.8.3.3 | ScalarmwrPeerIpv4SubnetMask | read-only | current | The peer IPv4 subnet mask. |
| 1.3.6.1.4.1.7262.4.5.8.3.4 | ScalarmwrPeerIpv4DefaultGateway | read-only | current | The peer IPv4 default gateway. |
| 1.3.6.1.4.1.7262.4.5.8.3.5 | ScalarmwrPeerIpv6Prefix | read-only | current | The peer IPv6 prefix. |
| 1.3.6.1.4.1.7262.4.5.8.3.6 | ScalarmwrPeerIpv6Domain | read-only | current | The peer IPv6 domain. |
| 1.3.6.1.4.1.7262.4.5.8.3.7 | ScalarmwrPeerIpv6Address | read-only | current | The peer IPv6 address. |
| 1.3.6.1.4.1.7262.4.5.8.3.8 | ScalarmwrPeerIpv6GatewayDomain | read-only | current | The peer IPv6 gateway domain |
| 1.3.6.1.4.1.7262.4.5.8.3.9 | ScalarmwrPeerIpv6GatewayAddress | read-only | current | The peer IPv6 gateway address. |
| 1.3.6.1.4.1.7262.4.5.8.3.10 | ScalarmwrPeerVlanId | read-only | current | The peer vlan Id. |
| 1.3.6.1.4.1.7262.4.5.8.3.11 | ScalarmwrPeerVlanPriority | read-only | current | The peer vlan priority. |
| 1.3.6.1.4.1.7262.4.5.8.3.12 | ScalarmwrPeerDscp | read-only | current | The peer management dscp. |
| 1.3.6.1.4.1.7262.4.5.8.4 | NodemwrNetworkingNotifications | |||
| 1.3.6.1.4.1.7262.4.5.9 | NodemwrEthernet | |||
| 1.3.6.1.4.1.7262.4.5.9.1 | NodemwrEthernetConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.9.1.1 | NodemwrQos | |||
| 1.3.6.1.4.1.7262.4.5.9.1.1.1 | ScalarmwrQosState | read-write | current | Indicates whether QOS is enabled. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.2 | ScalarmwrCosSource | read-write | current | Indicates the class of service tag type. Based on the setting system will use the CoS value in the outer VLAN tag, inner VLAN tag, DSCP or MPLS exp. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.3 | ScalarmwrOuterTpid | read-write | current | Sets the value of the Q-in-Q outer tag. This tag is also used to classify the single tagged traffic. Default value is 0x8100. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.4 | ScalarmwrInnerTpid | read-write | current | Sets the value of the Q-in-Q inner VLAN tag. Default value is 0x8100. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5 | TablemwrCosTable | not-accessible | current | A table of Qos Settings per port, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1 | RowmwrCosEntry | not-accessible | current | An entry of Qos setting per port |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.1 | ColumnmwrCosIndex | not-accessible | current | A unique name identifying each enet port in port isolation mode or the bridgeMode index when system is configured in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.2 | ColumnmwrCos0 | read-write | current | User queue assignments for CoS0. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.3 | ColumnmwrCos1 | read-write | current | User queue assignments for CoS1. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.4 | ColumnmwrCos2 | read-write | current | User queue assignments for CoS2. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.5 | ColumnmwrCos3 | read-write | current | User queue assignments for CoS3. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.6 | ColumnmwrCos4 | read-write | current | User queue assignments for CoS4. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.7 | ColumnmwrCos5 | read-write | current | User queue assignments for CoS5. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.8 | ColumnmwrCos6 | read-write | current | User queue assignments for CoS6. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.9 | ColumnmwrCos7 | read-write | current | User queue assignments for CoS7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest… |
| 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.10 | ColumnmwrCosRowStatus | read-write | current | Row status for CoS queue mapping. This object is used to apply all CoS settings simultaneously. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.6 | TablemwrCosDefValueTable | not-accessible | current | A table containing the CoS default value, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.6.1 | RowmwrCosDefValueEntry | not-accessible | current | A table entry containing the CoS default value. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.1 | ColumnmwrCosDefValueIndex | not-accessible | current | Specifies CoS default value for each port in port isolation or in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.2 | ColumnmwrCosDefValue | read-write | current | Specifies CoS default value for each port in port isolation or in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7 | TablemwrCirQTable | not-accessible | current | A table containing the CIR value for each queue, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1 | RowmwrCirQEntry | not-accessible | current | A table entry containing the CIR value for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.1 | ColumnmwrCirQIndex | not-accessible | current | Specifies CIR queue index for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.2 | ColumnmwrCirQ1 | read-write | current | User CIR setting for queue 1. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.3 | ColumnmwrCirQ2 | read-write | current | User CIR setting for queue 2. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.4 | ColumnmwrCirQ3 | read-write | current | User CIR setting for queue 3. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.5 | ColumnmwrCirQ4 | read-write | current | User CIR setting for queue 4. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.6 | ColumnmwrCirQ5 | read-write | current | User CIR setting for queue 5. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.7 | ColumnmwrCirQ6 | read-write | current | User CIR setting for queue 6. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.8 | ColumnmwrCirQ7 | read-write | current | User CIR setting for queue 7. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.9 | ColumnmwrCirQ8 | read-write | current | User CIR setting for queue 8. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.10 | ColumnmwrCirQRowStatus | read-write | current | The CIR table Row status. This object is used to apply all queue CIR settings simultaneously. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8 | TablemwrCbsQTable | not-accessible | current | A table containing CBS settings for each queue, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1 | RowmwrCbsQEntry | not-accessible | current | A table entry containing CBS settings for each queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.1 | ColumnmwrCbsQIndex | not-accessible | current | Specifies CBS queue index for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.2 | ColumnmwrCbsQ1 | read-write | current | User CBS setting for queue 1. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.3 | ColumnmwrCbsQ2 | read-write | current | User CBS setting for queue 2. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.4 | ColumnmwrCbsQ3 | read-write | current | User CBS setting for queue 3. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.5 | ColumnmwrCbsQ4 | read-write | current | User CBS setting for queue 4. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.6 | ColumnmwrCbsQ5 | read-write | current | User CBS setting for queue 5. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.7 | ColumnmwrCbsQ6 | read-write | current | User CBS setting for queue 6. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.8 | ColumnmwrCbsQ7 | read-write | current | User CBS setting for queue 7. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.9 | ColumnmwrCbsQ8 | read-write | current | User CBS setting for queue 8. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.10 | ColumnmwrCbsQRowStatus | read-write | current | The CBS table Row status. This object is used to apply all queue CBS settings simultaneously. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9 | TablemwrWeightQTable | not-accessible | current | A table containing queue weight setting for each queue, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1 | RowmwrWeightQEntry | not-accessible | current | A table entry containing queue weight setting for each queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.1 | ColumnmwrWeightQIndex | not-accessible | current | Specifies queue weight index for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.2 | ColumnmwrWeightQ1 | read-write | current | Specifies queue weight value for queue 1. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.3 | ColumnmwrWeightQ2 | read-write | current | Specifies queue weight value for queue 2. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.4 | ColumnmwrWeightQ3 | read-write | current | Specifies queue weight value for queue 3. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.5 | ColumnmwrWeightQ4 | read-write | current | Specifies queue weight value for queue 4. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.6 | ColumnmwrWeightQ5 | read-write | current | Specifies queue weight value for queue 5. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.7 | ColumnmwrWeightQ6 | read-write | current | Specifies queue weight value for queue 6. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.8 | ColumnmwrWeightQ7 | read-write | current | Specifies queue weight value for queue 7. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.9 | ColumnmwrWeightQ8 | read-write | current | Specifies queue weight value for queue 8. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.10 | ColumnmwrWeightQRowStatus | read-write | current | The queue weight table Row status. This object is used to apply all queue weight settings simultaneously. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10 | TablemwrQbsQTable | not-accessible | current | A table containing queue buffer size, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1 | RowmwrQbsQEntry | not-accessible | current | A table entry containing queue buffer size. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.1 | ColumnmwrQbsQIndex | not-accessible | current | Specifies QBS queue index for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.2 | ColumnmwrQbsQ1 | read-write | current | Specifies queue buffer size (QBS) for queue 1. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.3 | ColumnmwrQbsQ2 | read-write | current | Specifies queue buffer size (QBS) for queue 2. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.4 | ColumnmwrQbsQ3 | read-write | current | Specifies queue buffer size (QBS) for queue 3. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.5 | ColumnmwrQbsQ4 | read-write | current | Specifies queue buffer size (QBS) for queue 4. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.6 | ColumnmwrQbsQ5 | read-write | current | Specifies queue buffer size (QBS) for queue 5. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.7 | ColumnmwrQbsQ6 | read-write | current | Specifies queue buffer size (QBS) for queue 6. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.8 | ColumnmwrQbsQ7 | read-write | current | Specifies queue buffer size (QBS) for queue 7. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.9 | ColumnmwrQbsQ8 | read-write | current | Specifies queue buffer size (QBS) for queue 8. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.10 | ColumnmwrQbsQRowStatus | read-write | current | The queue buffer size (QBS) table Row status. This object is used to apply all queue QBS settings simultaneously. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11 | TablemwrPolicyQTable | not-accessible | current | A table containing queue policy for each queue, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1 | RowmwrPolicyQEntry | not-accessible | current | A table entry containing queue policy for each queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.1 | ColumnmwrPolicyQIndex | not-accessible | current | Specifies queue policy index for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.2 | ColumnmwrPolicyQ1 | read-write | current | User queue policy value for queue 1. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.3 | ColumnmwrPolicyQ2 | read-write | current | User queue policy value for queue 2. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.4 | ColumnmwrPolicyQ3 | read-write | current | User queue policy value for queue 3. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.5 | ColumnmwrPolicyQ4 | read-write | current | User queue policy value for queue 4. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.6 | ColumnmwrPolicyQ5 | read-write | current | User queue policy value for queue 5. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.7 | ColumnmwrPolicyQ6 | read-write | current | User queue policy value for queue 6. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.8 | ColumnmwrPolicyQ7 | read-write | current | User queue policy value for queue 7. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.9 | ColumnmwrPolicyQ8 | read-write | current | User queue policy value for queue 8. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.10 | ColumnmwrPolicyQRowStatus | read-write | current | The queue policy table Row status. This object is used to apply all queue policy settings simultaneously. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.12 | TablemwrUserClassTable | not-accessible | current | A table containing QOS user class settings, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.12.1 | RowmwrUserClassEntry | not-accessible | current | A table entry containing QOS user class settings. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.1 | ColumnmwrUserClassIndex | not-accessible | current | Specifies user class queue index for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.2 | ColumnmwrUserClassOffset | read-write | current | Specifies user class offset value. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.3 | ColumnmwrUserClassValue | read-write | current | Specifies user class value. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.4 | ColumnmwrUserClassMask | read-write | current | Specifies user class mask. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.13 | TablemwrUserFlowTable | not-accessible | current | A table containing QOS user flow settings, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.13.1 | RowmwrUserFlowEntry | not-accessible | current | A table entry containing QOS user flow settings. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.1 | ColumnmwrUserFlowIndex | not-accessible | current | Specifies user flow filter queue index for each queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.2 | ColumnmwrUserFlowFilter | read-write | current | Specifies user flow filter value for each queue. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14 | TablemwrUserFlowMappingTable | not-accessible | current | A table containing QOS user flow mapping settings in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1 | RowmwrUserFlowMappingEntry | not-accessible | current | A table entry containing QOS user flow mapping settings in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.1 | ColumnmwrUserFlowMappingIndex | not-accessible | current | Specifies user flow mapping index for each flow in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.2 | ColumnmwrUserFlowMappingState | read-write | current | Enables or disabled user flow mapping for a specific flow in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.3 | ColumnmwrUserFlowMapping1Q | read-write | current | Specifies the selected queue for gi01 in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.4 | ColumnmwrUserFlowMapping2Q | read-write | current | Specifies the selected queue for gi02 in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.5 | ColumnmwrUserFlowMapping3Q | read-write | current | Specifies the selected queue for gi03 in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.6 | ColumnmwrUserFlowMapping4Q | read-write | current | Specifies the selected queue for gi04 in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.7 | ColumnmwrUserFlowMappingRowStatus | read-write | current | Row status for user flow mapping in port isolation mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.15 | TablemwrUserFlowMappingBridgeModeTable | not-accessible | current | A table containing QOS user flow mapping settings in bridge mode, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.15.1 | RowmwrUserFlowMappingBridgeModeEntry | not-accessible | current | A table entry containing QOS user flow mapping settings in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.1 | ColumnmwrUserFlowMappingBridgeModeIndex | not-accessible | current | Specifies user flow mapping index for each flow in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.2 | ColumnmwrUserFlowMappingBridgeModeState | read-write | current | Enables or disabled user flow mapping for a specific flow in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.3 | ColumnmwrUserFlowMappingBridgeModeQ | read-write | current | Specifies the selected user flow mapping queue in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.4 | ColumnmwrUserFlowMappingBridgeModeRowStatus | read-write | current | Row status for user flow mapping in bridge mode. |
| 1.3.6.1.4.1.7262.4.5.9.1.2 | NodemwrEthThresholdAlarm | |||
| 1.3.6.1.4.1.7262.4.5.9.1.2.1 | TablemwrPortThresholdAlarmTable | not-accessible | current | A table containing threshold alarms parameters. |
| 1.3.6.1.4.1.7262.4.5.9.1.2.1.1 | RowmwrPortThresholdAlarmEntry | not-accessible | current | A table entry containing threshold alarms parameters. |
| 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.1 | ColumnmwrPortThresholdAlarmIndex | not-accessible | current | Index to Threshold alarm table. Instance 1 indicates Radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.2 | ColumnmwrDroppedPktsThresholdParams | read-write | current | This object configures the dropped packets threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An examp… |
| 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.3 | ColumnmwrOutBWUtilizationThresholdParams | read-write | current | This object configures the BW utilization threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An exampl… |
| 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.4 | ColumnmwrThroughputThresholdParams | read-write | current | This object configures the radio throughput threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An exam… |
| 1.3.6.1.4.1.7262.4.5.9.1.2.2 | TablemwrRadioQThresholdAlarmTable | not-accessible | current | A table of radio port queue based Threshold Alarm settings, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.9.1.2.2.1 | RowmwrRadioQThresholdAlarmEntry | not-accessible | current | A table entry of queue based Threshold Alarm settings. |
| 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.1 | ColumnmwrRadioQThresholdAlarmIndex | read-only | current | A unique identifier for one of the 8 queues |
| 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.2 | ColumnmwrRadioQDepthThresholdParams | read-write | current | The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is a… |
| 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.3 | ColumnmwrRadioQDroppedPktsThresholdParams | read-write | current | The threshold, in packets, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is a… |
| 1.3.6.1.4.1.7262.4.5.9.2 | NodemwrEthernetStatus | |||
| 1.3.6.1.4.1.7262.4.5.9.3 | NodemwrEthernetPerformance | |||
| 1.3.6.1.4.1.7262.4.5.9.3.1 | TablemwrEnetPerfPortStatsTable | not-accessible | current | A table containing Ethernet port statistics. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1 | RowmwrEnetPerfPortStatsEntry | not-accessible | current | A table entry containing Ethernet port statistics. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.1 | ColumnmwrEnetPortStatsIndex | read-only | current | A table index to Ethernet ports. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.2 | ColumnmwrPortStatsInOctet | read-only | current | A 64-bit counter representing the incoming octets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.3 | ColumnmwrPortStatsInGoodPkts | read-only | current | A 64-bit counter representing the incoming good packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.4 | ColumnmwrPortStatsInErrPkts | read-only | current | A 64-bit counter representing the incoming error packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.5 | ColumnmwrPortStatsInDiscardPkts | read-only | current | A 64-bit counter representing the incoming discarded packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.6 | ColumnmwrPortStatsOutOctets | read-only | current | A 64-bit counter representing the outgoing octets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.7 | ColumnmwrPortStatsOutGoodPkts | read-only | current | A 64-bit counter representing the outgoing good packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.8 | ColumnmwrPortStatsOutErrPkts | read-only | current | A 64-bit counter representing the outgoing error packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.9 | ColumnmwrPortStatsOutDiscardPkts | read-only | current | A 64-bit counter representing the outgoing discarded packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.10 | ColumnmwrPortStatsOutBwUtilization | read-only | current | This object represents the ratio of egress data rate and the egress link capacity of the port. The value is represented in %. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.11 | ColumnmwrPortStatsInBwUtilization | read-only | current | This object represents the ratio of ingress data rate and the ingress link capacity of the port. The value is represented in %. |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.12 | ColumnmwrPortStatsInDataRate | read-only | current | The Ethernet data rate coming into the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs |
| 1.3.6.1.4.1.7262.4.5.9.3.1.1.13 | ColumnmwrPortStatsThroughput | read-only | current | The Ethernet data rate going out of the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs. |
| 1.3.6.1.4.1.7262.4.5.9.3.2 | TablemwrEnetPerfPortStats32BitTable | not-accessible | current | A table containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1 | RowmwrEnetPerfPortStats32BitEntry | not-accessible | current | A table entry containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.1 | ColumnmwrPortStats32BitIndex | not-accessible | current | A table index to ports carrying Ethernet packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.2 | ColumnmwrPortStatsInOctet32Bit | read-only | current | A 32-bit counter representing the incoming octets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.3 | ColumnmwrPortStatsInGoodPkts32Bit | read-only | current | A 32-bit counter representing the incoming good packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.4 | ColumnmwrPortStatsInErrPkts32Bit | read-only | current | A 32-bit counter representing the incoming error packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.5 | ColumnmwrPortStatsInDiscardPkts32Bit | read-only | current | A 32-bit counter representing the incoming discarded packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.6 | ColumnmwrPortStatsOutOctets32Bit | read-only | current | A 32-bit counter representing the outgoing octets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.7 | ColumnmwrPortStatsOutGoodPkts32Bit | read-only | current | A 32-bit counter representing the outgoing good packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.8 | ColumnmwrPortStatsOutErrPkts32Bit | read-only | current | A 32-bit counter representing the outgoing error packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.2.1.9 | ColumnmwrPortStatsOutDiscardPkts32Bit | read-only | current | A 32-bit counter representing the outgoing discarded packets. |
| 1.3.6.1.4.1.7262.4.5.9.3.3 | TablemwrEnetPerfRadioQStatsTable | not-accessible | current | A table containing radio queue statistics. |
| 1.3.6.1.4.1.7262.4.5.9.3.3.1 | RowmwrEnetPerfRadioQStatsEntry | not-accessible | current | A table entry containing radio queue statistics. |
| 1.3.6.1.4.1.7262.4.5.9.3.3.1.1 | ColumnmwrRadioQStatsIndex | not-accessible | current | A unique value for each of the 8 queues. |
| 1.3.6.1.4.1.7262.4.5.9.3.3.1.2 | ColumnmwrRadioQStatsInGoodPkts | read-only | current | The current count of packets in queues. |
| 1.3.6.1.4.1.7262.4.5.9.3.3.1.3 | ColumnmwrRadioQStatsInDiscardPkts | read-only | current | The current count of packets received in queues that were discarded due to queue overflow. |
| 1.3.6.1.4.1.7262.4.5.9.3.3.1.4 | ColumnmwrRadioQStatsOutBwUtilization | read-only | current | The ratio of egress data rate and user configured radio queue CIR. |
| 1.3.6.1.4.1.7262.4.5.9.3.3.1.5 | ColumnmwrRadioQStatsInDataRate | read-only | current | The ingress data rate of the radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.3.3.1.6 | ColumnmwrRadioQStatsThroughput | read-only | current | The throughput of the radio queue. |
| 1.3.6.1.4.1.7262.4.5.9.3.4 | TablemwrEnetPerfRadioQStats32BitTable | not-accessible | current | A table containing 32-bit counters for radio queue statistics. |
| 1.3.6.1.4.1.7262.4.5.9.3.4.1 | RowmwrEnetPerfRadioQStats32BitEntry | not-accessible | current | A table entry containing 32-bit counters for radio queue statistics. |
| 1.3.6.1.4.1.7262.4.5.9.3.4.1.1 | ColumnmwrRadioQStats32BitIndex | not-accessible | current | A unique value for each of the 8 queues. |
| 1.3.6.1.4.1.7262.4.5.9.3.4.1.2 | ColumnmwrRadioQStatsInGoodPkts32Bit | read-only | current | A 32-bit counter representing the current count of packets in queues. |
| 1.3.6.1.4.1.7262.4.5.9.3.4.1.3 | ColumnmwrRadioQStatsDiscardPkts32Bit | read-only | current | A 32-bit counter representing the current count of packets received in queues that were discarded due to queue overflow . |
| 1.3.6.1.4.1.7262.4.5.9.4 | NodemwrEthernetNotifications | |||
| 1.3.6.1.4.1.7262.4.5.9.4.1 | NotificationmwrDroppedPktsThreshold | current | This notification is raised when the ethernet packet drops in an interface has exceeded user set limit. | |
| 1.3.6.1.4.1.7262.4.5.9.4.2 | NotificationmwrRadioQDroppedPktsThreshold | current | This notification is raised when Ethernet packet drops over radio traffic queue has exceeded the user configured limit. The mwrRadioQThresholdAlarmIndex varbin… | |
| 1.3.6.1.4.1.7262.4.5.9.4.3 | NotificationmwrRadioQDepthThreshold | current | This notification is raised when the data buffered in the specific radio traffic queue has exceeded the user set limit. The mwrRadioQThresholdAlarmIndex varbin… | |
| 1.3.6.1.4.1.7262.4.5.9.4.4 | NotificationmwrOutBWUtilizationThreshold | current | This notification is raised when the out bandwidth utilization of an interface has exceeded the user configured limit. | |
| 1.3.6.1.4.1.7262.4.5.9.4.5 | NotificationmwrThroughputThreshold | current | This notification is raised when the throughput of an interface has exceeded the user configured limit. | |
| 1.3.6.1.4.1.7262.4.5.10 | NodemwrAcm | |||
| 1.3.6.1.4.1.7262.4.5.10.1 | NodemwrAcmConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.10.1.1 | ScalarmwrAcmManualMode | read-write | current | Enables or disables the Adaptive Coding Modulation (ACM) Manual Mode. |
| 1.3.6.1.4.1.7262.4.5.10.1.2 | ScalarmwrAcmState | read-write | current | Enables or disables the Adaptive Code Modulation (ACM). |
| 1.3.6.1.4.1.7262.4.5.10.1.3 | ScalarmwrAcmWaitToRestore | read-write | current | This object configures the ACM wait to restore duration time in seconds. |
| 1.3.6.1.4.1.7262.4.5.10.1.4 | TablemwrAcmModeTable | not-accessible | current | A table containing available Adaptive Code Modulation (ACM) tx profiles. |
| 1.3.6.1.4.1.7262.4.5.10.1.4.1 | RowmwrAcmModeEntry | not-accessible | current | A table entry containing available Adaptive Code Modulation (ACM) tx profiles. |
| 1.3.6.1.4.1.7262.4.5.10.1.4.1.1 | ColumnmwrAcmModeIndex | not-accessible | current | A unique value for each Adaptive Code Modulation (ACM) tx profile. |
| 1.3.6.1.4.1.7262.4.5.10.1.4.1.2 | ColumnmwrAcmTxProfileName | read-only | current | The Adaptive Code Modulation (ACM) tx profile name. |
| 1.3.6.1.4.1.7262.4.5.10.1.4.1.3 | ColumnmwrAcmTxProfileRange | read-write | current | Specifies the range for the Adaptive Code Modulation (ACM) TX Profile. |
| 1.3.6.1.4.1.7262.4.5.10.2 | NodemwrAcmStatus | |||
| 1.3.6.1.4.1.7262.4.5.10.2.1 | TablemwrAcmStatusTable | not-accessible | current | A table containing Adaptive Code Modulation (ACM) status. |
| 1.3.6.1.4.1.7262.4.5.10.2.1.1 | RowmwrAcmStatusEntry | not-accessible | current | A table entry containing Adaptive Code Modulation (ACM) status. |
| 1.3.6.1.4.1.7262.4.5.10.2.1.1.1 | ColumnmwrAcmStatusIndex | not-accessible | current | A unique value for each interface. |
| 1.3.6.1.4.1.7262.4.5.10.2.1.1.2 | ColumnmwrAcmActualTxProfile | read-only | current | A read-only string specifying the currently running ACM TX profile. |
| 1.3.6.1.4.1.7262.4.5.10.3 | NodemwrAcmDiagnostics | |||
| 1.3.6.1.4.1.7262.4.5.10.3.1 | TablemwrAcmDiagTable | not-accessible | current | A table containing ACM diagnostic settings. |
| 1.3.6.1.4.1.7262.4.5.10.3.1.1 | RowmwrAcmDiagEntry | not-accessible | current | A table entry containing ACM diagnostic settings. |
| 1.3.6.1.4.1.7262.4.5.10.3.1.1.1 | ColumnmwrAcmDiagIndex | not-accessible | current | A unique value for each radio channel if applicable. |
| 1.3.6.1.4.1.7262.4.5.10.3.1.1.2 | ColumnmwrAcmDiagnose | read-write | current | This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased. Poll the mwrAcmDiagnosticRe… |
| 1.3.6.1.4.1.7262.4.5.10.3.1.1.3 | ColumnmwrAcmDiagnosticResult | read-only | current | The result from ACM Diagnostic is read from this object. |
| 1.3.6.1.4.1.7262.4.5.10.4 | NodemwrAcmNotifications | |||
| 1.3.6.1.4.1.7262.4.5.10.4.1 | NotificationmwrAcmConfigMismatch | current | This notification is raised when ACM configuration mismatch between the link partners. | |
| 1.3.6.1.4.1.7262.4.5.10.4.2 | NotificationmwrAcmProfileLowered | current | This notification is raised when system is executing ACM and working at a lower radio profile than the configured nominal radio profile. | |
| 1.3.6.1.4.1.7262.4.5.10.4.3 | NotificationmwrAcmProfileChanged | current | This notification is raised when system is executing in ACM and has changed the radio profile. | |
| 1.3.6.1.4.1.7262.4.5.11 | NodemwrAtpc | |||
| 1.3.6.1.4.1.7262.4.5.11.1 | NodemwrAtpcConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.11.1.1 | TablemwrAtpcConfigurationsTable | not-accessible | current | Table containing ATPC configurations. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1 | RowmwrAtpcConfigurationsEntry | not-accessible | current | Table entry containing ATPC configurations. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.1 | ColumnmwrAtpcConfigIndex | not-accessible | current | A unique value for each of the radio channel instance. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.2 | ColumnmwrAtpcState | read-write | current | Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.3 | ColumnmwrAtpcCoordinatedPower | read-write | current | This object is the value at which the system will transmit if the ATPC and the coordinated power are enabled. This is only if the system is transmitting the ma… |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.4 | ColumnmwrAtpcCoordinatedPowerEnable | read-write | current | Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.5 | ColumnmwrAtpcMinTxPower | read-write | current | Sets the minimum ATPC transmit power in dB x 10. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.6 | ColumnmwrAtpcMaxTxPower | read-write | current | Sets the maximum ATPC transmit power in dB x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.7 | ColumnmwrAtpcRslTarget | read-write | current | This object configures Received Signal Level that should be maintained by the link by adjusting the transmit power when ATPC is enabled. |
| 1.3.6.1.4.1.7262.4.5.11.1.1.1.8 | ColumnmwrAtpcRslTargetUseDefault | read-write | current | When this object is enabled the default RSL target will be used instead of the configured mwrAtpcRslTarget. The mwrAtpcDefaultRslTarget displays the default va… |
| 1.3.6.1.4.1.7262.4.5.11.2 | NodemwrAtpcStatus | |||
| 1.3.6.1.4.1.7262.4.5.11.2.1 | TablemwrAtpcStatusTable | not-accessible | current | A table containing ATPC status. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1 | RowmwrAtpcStatusEntry | not-accessible | current | A table entry containing ATPC status. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.1 | ColumnmwrAtpcStatusIndex | not-accessible | current | A unique value for each of the radio instance. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.2 | ColumnmwrAtpcRunningStatus | read-only | current | Indicates the actual condition of ATPC: - disabled: Configuration is set to off. - disabledAuto: Feature was automatically disabled and is transmitting at coor… |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.3 | ColumnmwrAtpcDefaultRslTarget | read-only | current | This object is the default value of the Received Signal Level target when ATPC is enabled. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.4 | ColumnmwrAtpcActualMinTxPower | read-only | current | This object indicates the running configuration for ATPC min tx power. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.5 | ColumnmwrAtpcActualMaxTxPower | read-only | current | This object indicates the running configuration for ATPC max tx power. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.6 | ColumnmwrAtpcActualCoordinatedPower | read-only | current | This value is the running configuration of the coordinated power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.7 | ColumnmwrAtpcPeerRslTarget | read-only | current | This object is the peer Received Signal Level target when ATPC is enabled. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.8 | ColumnmwrAtpcMinRslTarget | read-only | current | Represents the minimum RSL target value. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.9 | ColumnmwrAtpcMaxRslTarget | read-only | current | Represents the maximum RSL target value. |
| 1.3.6.1.4.1.7262.4.5.11.2.1.1.10 | ColumnmwrAtpcPeerRsl | read-only | current | This object represents the peer actual RSL value. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For e… |
| 1.3.6.1.4.1.7262.4.5.11.3 | NodemwrAtpcNotifications | |||
| 1.3.6.1.4.1.7262.4.5.11.3.1 | NotificationmwrAtpcConfigMismatch | current | This notification is raised when ATPC configuration mismatch has occurred between link partners. | |
| 1.3.6.1.4.1.7262.4.5.11.3.2 | NotificationmwrAtpcAutoDisabled | current | This notification is raised when ATPC is automatically disabled due to coordinated power condition. When this notification is raised the radio will be transmit… | |
| 1.3.6.1.4.1.7262.4.5.12 | NodemwrRadio | |||
| 1.3.6.1.4.1.7262.4.5.13 | NodemwrCompression | |||
| 1.3.6.1.4.1.7262.4.5.13.1 | NodemwrCompressionConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.13.1.1 | ScalarmwrBacRecordAvgPeriod | read-write | current | Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds. |
| 1.3.6.1.4.1.7262.4.5.13.1.2 | TablemwrBacTable | not-accessible | current | Table containing Bandwidth Acceleration entries. |
| 1.3.6.1.4.1.7262.4.5.13.1.2.1 | RowmwrBacEntry | not-accessible | current | Contains Bandwidth Acceleration entries. |
| 1.3.6.1.4.1.7262.4.5.13.1.2.1.1 | ColumnmwrBacQIndex | not-accessible | current | A unique value for each of the 8 radio egress Queues. |
| 1.3.6.1.4.1.7262.4.5.13.1.2.1.2 | ColumnmwrBacQEnable | read-write | current | Configure queue compression state to disable/enable. |
| 1.3.6.1.4.1.7262.4.5.13.1.2.1.3 | ColumnmwrBacQBlockSize | read-write | current | Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Vali… |
| 1.3.6.1.4.1.7262.4.5.13.1.2.1.4 | ColumnmwrBacRecordLogging | read-write | current | Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog. |
| 1.3.6.1.4.1.7262.4.5.13.1.3 | TablemwrHcQTable | not-accessible | current | A table containing Header Compression settings for each queue, the configuration corresponds to the egress QoS of radio port. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1 | RowmwrHcQEntry | not-accessible | current | A table entry containing Header Compression settings for each queue. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.1 | ColumnmwrHcQIndex | not-accessible | current | Specifies Header Compression queue index for each radio queue. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.2 | ColumnmwrHcQ1 | read-write | current | Enables or disables the Header Compression on queue 1. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.3 | ColumnmwrHcQ2 | read-write | current | Enables or disables the Header Compression on queue 2. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.4 | ColumnmwrHcQ3 | read-write | current | Enables or disables the Header Compression on queue 3. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.5 | ColumnmwrHcQ4 | read-write | current | Enables or disables the Header Compression on queue 4. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.6 | ColumnmwrHcQ5 | read-write | current | Enables or disables the Header Compression on queue 5. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.7 | ColumnmwrHcQ6 | read-write | current | Enables or disables the Header Compression on queue 6. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.8 | ColumnmwrHcQ7 | read-write | current | Enables or disables the Header Compression on queue 7. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.9 | ColumnmwrHcQ8 | read-write | current | Enables or disables the Header Compression on queue 8. |
| 1.3.6.1.4.1.7262.4.5.13.1.3.1.10 | ColumnmwrHcQRowStatus | read-write | current | The Header Compression table Row Status. This object is used to apply Header Compression settings for all queues simultaneously. |
| 1.3.6.1.4.1.7262.4.5.13.2 | NodemwrCompressionStatus | |||
| 1.3.6.1.4.1.7262.4.5.13.2.1 | TablemwrBacStatusTable | not-accessible | current | Table containing Bandwidth Acceleration status entries. |
| 1.3.6.1.4.1.7262.4.5.13.2.1.1 | RowmwrBacStatusEntry | not-accessible | current | Contains Bandwidth Acceleration status entries. |
| 1.3.6.1.4.1.7262.4.5.13.2.1.1.1 | ColumnmwrBacStatusQIndex | not-accessible | current | A unique value for each of the 8 Queues. |
| 1.3.6.1.4.1.7262.4.5.13.2.1.1.2 | ColumnmwrBacUncompressedRatio | read-only | current | Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in to queue over specified average period in percentag… |
| 1.3.6.1.4.1.7262.4.5.13.2.1.1.3 | ColumnmwrBacGain | read-only | current | The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all compressed and uncompressed bytes calculated over an… |
| 1.3.6.1.4.1.7262.4.5.13.3 | NodemwrCompressionNotifications | |||
| 1.3.6.1.4.1.7262.4.5.14 | NodemwrEvents | |||
| 1.3.6.1.4.1.7262.4.5.14.1 | NodemwrEventsConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.14.1.1 | TablemwrEventConfigTable | not-accessible | current | A table of alarm configuration |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1 | RowmwrEventConfigEntry | not-accessible | current | An entry of alarm configuration |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1.1 | ColumnmwrEventConfigIndex | not-accessible | current | A unique value for each alarm. |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1.2 | ColumnmwrEventInstanceIndex | read-only | current | A unique value for each instance of an alarm. |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1.3 | ColumnmwrEventConfigSeverity | read-write | current | The severity of the alarm as minor, major or critical. |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1.4 | ColumnmwrEventName | read-only | current | Represents the event name. |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1.5 | ColumnmwrAlarmConfigState | read-write | current | The state of the alarm which can be either enabled or disabled. |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1.6 | ColumnmwrTrapConfigState | read-write | current | The state of the trap which can be either enabled or disabled. |
| 1.3.6.1.4.1.7262.4.5.14.1.1.1.7 | ColumnmwrLogEventState | read-write | current | This object is used to enable or disable logging the events. |
| 1.3.6.1.4.1.7262.4.5.15 | NodemwrLogs | |||
| 1.3.6.1.4.1.7262.4.5.15.1 | NodemwrLogsConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.15.1.1 | ScalarmwrEventLogEnable | read-write | current | Indicates whether event log is enabled. |
| 1.3.6.1.4.1.7262.4.5.15.1.2 | ScalarmwrPerfmLogEnable | read-write | current | Indicates whether performance log is enabled. |
| 1.3.6.1.4.1.7262.4.5.15.1.3 | ScalarmwrPerfmLogInterval | read-write | current | Performance statistics are logged periodically by this interval. The interval can be up to 00:15:00 (15 minutes) and as short as 00:00:1 (1 seconds). |
| 1.3.6.1.4.1.7262.4.5.15.1.4 | TablemwrSysLogServerTable | not-accessible | current | The syslog server table. |
| 1.3.6.1.4.1.7262.4.5.15.1.4.1 | RowmwrSysLogServerEntry | not-accessible | current | The syslog server table entry. |
| 1.3.6.1.4.1.7262.4.5.15.1.4.1.1 | ColumnmwrSysLogServerIndex | not-accessible | current | The syslog server table index. |
| 1.3.6.1.4.1.7262.4.5.15.1.4.1.2 | ColumnmwrSysLogEnable | read-write | current | Indicates whether sys log is enabled. |
| 1.3.6.1.4.1.7262.4.5.15.1.4.1.3 | ColumnmwrSysLogHostDomain | read-write | current | Indicates sys log host inet address type. Valid types are ipv4 or ipv6. |
| 1.3.6.1.4.1.7262.4.5.15.1.4.1.4 | ColumnmwrSysLogHostAddress | read-write | current | Indicates sys log host inet address octet string. |
| 1.3.6.1.4.1.7262.4.5.16 | NodemwrPM | |||
| 1.3.6.1.4.1.7262.4.5.16.1 | NodemwrPMConfigurations | |||
| 1.3.6.1.4.1.7262.4.5.16.1.1 | TablemwrPmRspiThresholdTable | not-accessible | current | Performance Monitoring table for Radio Synchronous Physical Interface thresholds. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1 | RowmwrPmRspiThresholdEntry | not-accessible | current | Contains entries for Radio Synchronous Physical Interface thresholds. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.1 | ColumnmwrPmRspiThrIndex | not-accessible | current | Index to PM RSPI Threshold table. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.2 | ColumnmwrPmRLT1 | read-write | current | Receive Level Threshold 1, represents the value of the first received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.3 | ColumnmwrPmRLT2 | read-write | current | Receive Level Threshold 2, represents the value of the second received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.4 | ColumnmwrPmRLT3 | read-write | current | Receive Level Threshold 3, represents the value of the third received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.5 | ColumnmwrPmRLT4 | read-write | current | Receive Level Threshold 4, represents the value of the fourth received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.6 | ColumnmwrPmTLT1 | read-write | current | Transmit Level Threshold 1, represents the value of the first transmitted power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.7 | ColumnmwrPmTLT2 | read-write | current | Transmit Level Threshold 2, represents the value of the second transmitted power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.1.1.1.8 | ColumnmwrPmRspiThrRowStatus | read-write | current | This object is used for applying all RSPI thresholds simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then chang… |
| 1.3.6.1.4.1.7262.4.5.16.1.2 | TablemwrPmBwThresholdTable | not-accessible | current | Performance monitoring out bandwidth utilization thresholds table. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1 | RowmwrPmBwThresholdEntry | not-accessible | current | Contains entries for performance monitoring out bandwidth utilization thresholds. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.1 | ColumnmwrPmBWThrIndex | not-accessible | current | Index to PM out BW Threshold table. Index 1 represents the radio port. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.2 | ColumnmwrPmBWT1 | read-write | current | The performance monitoring out BW utilization threshold 1. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.3 | ColumnmwrPmBWT2 | read-write | current | The performance monitoring out BW utilization threshold 2. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.4 | ColumnmwrPmBWT3 | read-write | current | The performance monitoring out BW utilization threshold 3. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.5 | ColumnmwrPmBWT4 | read-write | current | The performance monitoring out BW utilization threshold 4. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.6 | ColumnmwrPmBWT5 | read-write | current | The performance monitoring out BW utilization threshold 5. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.7 | ColumnmwrPmBWT6 | read-write | current | The performance monitoring out BW utilization threshold 6. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.8 | ColumnmwrPmBWT7 | read-write | current | The performance monitoring out BW utilization threshold 7. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.9 | ColumnmwrPmBWT8 | read-write | current | The performance monitoring out BW utilization threshold 8. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.10 | ColumnmwrPmBWT9 | read-write | current | The performance monitoring out BW utilization threshold 9. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.11 | ColumnmwrPmBWT10 | read-write | current | The performance monitoring out BW utilization threshold 10. |
| 1.3.6.1.4.1.7262.4.5.16.1.2.1.12 | ColumnmwrPmBWTRowStatus | read-write | current | This object is used for applying all PM bandwidth threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold value… |
| 1.3.6.1.4.1.7262.4.5.16.1.3 | TablemwrPmTpThresholdTable | not-accessible | current | Performance monitoring throughput thresholds table. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1 | RowmwrPmTpThresholdEntry | not-accessible | current | Contains entries for performance monitoring throughput thresholds. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.1 | ColumnmwrPmTPThrIndex | not-accessible | current | Index to PM throughput Threshold table. Index 1 represents the radio port. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.2 | ColumnmwrPmTPT1 | read-write | current | The performance monitoring throughput threshold 1. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.3 | ColumnmwrPmTPT2 | read-write | current | The performance monitoring throughput threshold 2. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.4 | ColumnmwrPmTPT3 | read-write | current | The performance monitoring throughput threshold 3. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.5 | ColumnmwrPmTPT4 | read-write | current | The performance monitoring throughput threshold 4. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.6 | ColumnmwrPmTPT5 | read-write | current | The performance monitoring throughput threshold 5. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.7 | ColumnmwrPmTPT6 | read-write | current | The performance monitoring throughput threshold 6. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.8 | ColumnmwrPmTPT7 | read-write | current | The performance monitoring throughput threshold 7. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.9 | ColumnmwrPmTPT8 | read-write | current | The performance monitoring throughput threshold 8. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.10 | ColumnmwrPmTPT9 | read-write | current | The performance monitoring throughput threshold 9. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.11 | ColumnmwrPmTPT10 | read-write | current | The performance monitoring throughput threshold 10. |
| 1.3.6.1.4.1.7262.4.5.16.1.3.1.12 | ColumnmwrPmTPTRowStatus | read-write | current | This object is used for applying all PM throughput threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold valu… |
| 1.3.6.1.4.1.7262.4.5.16.1.4 | TablemwrPmAdvThresholdTable | not-accessible | current | The advanced performance monitoring thresholds table. |
| 1.3.6.1.4.1.7262.4.5.16.1.4.1 | RowmwrPmAdvThresholdEntry | not-accessible | current | The advanced performance monitoring thresholds entries. |
| 1.3.6.1.4.1.7262.4.5.16.1.4.1.1 | ColumnmwrPmAdvThrIndex | not-accessible | current | The advanced performance monitoring thresholds table index. Index 1 represents the radio port. |
| 1.3.6.1.4.1.7262.4.5.16.1.4.1.2 | ColumnmwrPmAdvTxHitsT1 | read-write | current | The advanced performance monitoring Tx hits threshold 1. |
| 1.3.6.1.4.1.7262.4.5.16.1.4.1.3 | ColumnmwrPmAdvRxHitsT1 | read-write | current | The advanced performance monitoring Rx hits threshold 1. |
| 1.3.6.1.4.1.7262.4.5.16.1.4.1.4 | ColumnmwrPmAdvRowStatus | read-write | current | This object is used for applying all PM advanced threshold settings simultaneously. Set RowStatus to NotInService, make changes to all threshold values and the… |
| 1.3.6.1.4.1.7262.4.5.16.2 | NodemwrPMStatus | |||
| 1.3.6.1.4.1.7262.4.5.16.2.1 | TablemwrPmRspiTable | not-accessible | current | Performance Monitoring table for Radio Synchronous Physical Interface. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1 | RowmwrPmRspiEntry | not-accessible | current | Contains information for Radio Synchronous Physical Interface. The table is indexed by the granularity period and by the interval number. 22 rows are always pr… |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.1 | ColumnmwrPmRspiStatusIndex | not-accessible | current | A unique value for each of the radio instance. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.2 | ColumnmwrPmRspiInterval | not-accessible | current | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.3 | ColumnmwrPmRspiIntervalID | not-accessible | current | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Va… |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.4 | ColumnmwrPmRspiMeasSuspect | read-only | current | Any problem that invalidates the measurement. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.5 | ColumnmwrPmRspiMeasIntervalStatus | read-only | current | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.6 | ColumnmwrPmRspiMeasTimeLength | read-only | current | The interval duration in seconds. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.7 | ColumnmwrPmRspiMeasTLTMMin | read-only | current | The transmitted power level tide mark low value. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.8 | ColumnmwrPmRspiMeasTLTMMax | read-only | current | The transmitted power level tide mark high value. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.9 | ColumnmwrPmRspiMeasTLTS1 | read-only | current | The number of seconds above the first transmitted power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.10 | ColumnmwrPmRspiMeasTLTS2 | read-only | current | The number of seconds above the second transmitted power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.11 | ColumnmwrPmRspiMeasRLTMMin | read-only | current | The received power level tide mark low value. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.12 | ColumnmwrPmRspiMeasRLTMMax | read-only | current | The received power level tide mark high value. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.13 | ColumnmwrPmRspiMeasRLTS1 | read-only | current | The number of seconds below the first received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.14 | ColumnmwrPmRspiMeasRLTS2 | read-only | current | The number of seconds below the second received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.15 | ColumnmwrPmRspiMeasRLTS3 | read-only | current | The number of seconds below the third received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.1.1.16 | ColumnmwrPmRspiMeasRLTS4 | read-only | current | The number of seconds below the fourth received power level threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2 | TablemwrPmBWTable | not-accessible | current | Table containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1 | RowmwrPmBWEntry | not-accessible | current | Table entries containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.1 | ColumnmwrPmBWStatusIndex | not-accessible | current | The performance monitoring out BW utilization measurements table index. Index 1 represents the radio port. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.2 | ColumnmwrPmBWInterval | not-accessible | current | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.3 | ColumnmwrPmBWIntervalID | not-accessible | current | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Va… |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.4 | ColumnmwrPmBWMeasSuspect | read-only | current | Any problem that invalidates the measurement. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.5 | ColumnmwrPmBWMeasIntervalStatus | read-only | current | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.6 | ColumnmwrPmBWMeasTimeLength | read-only | current | The interval duration in seconds. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.7 | ColumnmwrPmMeasBWTS1 | read-only | current | The number of seconds above the first BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.8 | ColumnmwrPmMeasBWTS2 | read-only | current | The number of seconds above the second BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.9 | ColumnmwrPmMeasBWTS3 | read-only | current | The number of seconds above the third BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.10 | ColumnmwrPmMeasBWTS4 | read-only | current | The number of seconds above the fourth BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.11 | ColumnmwrPmMeasBWTS5 | read-only | current | The number of seconds above the fifth BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.12 | ColumnmwrPmMeasBWTS6 | read-only | current | The number of seconds above the sixth BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.13 | ColumnmwrPmMeasBWTS7 | read-only | current | The number of seconds above the seventh BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.14 | ColumnmwrPmMeasBWTS8 | read-only | current | The number of seconds above the eighth BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.15 | ColumnmwrPmMeasBWTS9 | read-only | current | The number of seconds above the ninth BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.2.1.16 | ColumnmwrPmMeasBWTS10 | read-only | current | The number of seconds above the tenth BW utilization threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3 | TablemwrPmTPTable | not-accessible | current | Table containing performance monitoring measurements in 15 min and 24 hrs intervals for throughput. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1 | RowmwrPmTPEntry | not-accessible | current | Table entry containing performance monitoring throughput measurements in 15 min and 24 hrs intervals. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.1 | ColumnmwrPmTPStatusIndex | not-accessible | current | The performance monitoring throughput measurements table index. Index 1 represents the radio port. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.2 | ColumnmwrPmTPInterval | not-accessible | current | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.3 | ColumnmwrPmTPIntervalID | not-accessible | current | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Va… |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.4 | ColumnmwrPmTPMeasSuspect | read-only | current | Any problem that invalidates the measurement. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.5 | ColumnmwrPmTPMeasIntervalStatus | read-only | current | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.6 | ColumnmwrPmTPMeasTimeLength | read-only | current | The interval duration in seconds. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.7 | ColumnmwrPmMeasTPTS1 | read-only | current | The number of seconds above the first throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.8 | ColumnmwrPmMeasTPTS2 | read-only | current | The number of seconds above the second throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.9 | ColumnmwrPmMeasTPTS3 | read-only | current | The number of seconds above the third throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.10 | ColumnmwrPmMeasTPTS4 | read-only | current | The number of seconds above the fourth throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.11 | ColumnmwrPmMeasTPTS5 | read-only | current | The number of seconds above the fifth throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.12 | ColumnmwrPmMeasTPTS6 | read-only | current | The number of seconds above the sixth throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.13 | ColumnmwrPmMeasTPTS7 | read-only | current | The number of seconds above the seventh throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.14 | ColumnmwrPmMeasTPTS8 | read-only | current | The number of seconds above the eighth throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.15 | ColumnmwrPmMeasTPTS9 | read-only | current | The number of seconds above the ninth throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.3.1.16 | ColumnmwrPmMeasTPTS10 | read-only | current | The number of seconds above the tenth throughput threshold. |
| 1.3.6.1.4.1.7262.4.5.16.2.4 | TablemwrPmAdvTable | not-accessible | current | The advanced performance monitoring measurements table. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1 | RowmwrPmAdvEntry | not-accessible | current | The advanced performance monitoring measurements table entries. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.1 | ColumnmwrPmAdvStatusIndex | not-accessible | current | The advanced performance monitoring measurements table index. Index 1 represents the radio port. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.2 | ColumnmwrPmAdvInterval | not-accessible | current | The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.3 | ColumnmwrPmAdvIntervalID | not-accessible | current | The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Va… |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.4 | ColumnmwrPmAdvMeasSuspect | read-only | current | Any problem that invalidates the measurement. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.5 | ColumnmwrPmAdvMeasIntervalStatus | read-only | current | An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.6 | ColumnmwrPmAdvMeasTimeLength | read-only | current | The interval duration in seconds. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.7 | ColumnmwrPmAdvTxCapPeak | read-only | current | The number of bits per second peak transmitted capacity during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.8 | ColumnmwrPmAdvTxCapRatio | read-only | current | The percentage of peak transmitted capacity referred to the total allowed capacity during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.9 | ColumnmwrPmAdvTxCapAvg | read-only | current | The number of bits per second average transmitted capacity during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.10 | ColumnmwrPmAdvTxCapAvgRatio | read-only | current | The percentage of average transmitted capacity during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.11 | ColumnmwrPmAdvTxCapHits | read-only | current | The number of seconds where the transmitted capacity has overcome a configurable threshold during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.12 | ColumnmwrPmAdvRxCapPeak | read-only | current | The number of bits per second peak received capacity during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.13 | ColumnmwrPmAdvRxCapRatio | read-only | current | The percentage of peak received capacity referred to the total allowed capacity during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.14 | ColumnmwrPmAdvRxCapAvg | read-only | current | The number of bits per second average received capacity during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.2.4.1.15 | ColumnmwrPmAdvRxCapHits | read-only | current | The number of seconds where the received capacity has overcome a configurable threshold during the time interval. |
| 1.3.6.1.4.1.7262.4.5.16.3 | NodemwrPMNotifications | |||
| 1.3.6.1.4.1.7262.4.5.17 | NodemwrUserMgmt | |||
| 1.3.6.1.4.1.7262.4.5.17.1 | NodemwrUserConfiguration | |||
| 1.3.6.1.4.1.7262.4.5.17.2 | NodemwrUserStatus | |||
| 1.3.6.1.4.1.7262.4.5.17.2.1 | TablemwrUserSessionTable | not-accessible | current | A table of user sessions |
| 1.3.6.1.4.1.7262.4.5.17.2.1.1 | RowmwrUserSessionEntry | not-accessible | current | User session entry |
| 1.3.6.1.4.1.7262.4.5.17.2.1.1.1 | ColumnmwrUserIndex | not-accessible | current | A unique value for each user. |
| 1.3.6.1.4.1.7262.4.5.17.2.1.1.2 | ColumnmwrUserName | read-only | current | The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in pr… |
| 1.3.6.1.4.1.7262.4.5.17.2.1.1.3 | ColumnmwrUserConnectionType | read-only | current | Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment. |
| 1.3.6.1.4.1.7262.4.5.17.2.1.1.4 | ColumnmwrUserConnectionState | read-only | current | The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of th… |
| 1.3.6.1.4.1.7262.4.5.17.3 | NodemwrUserNotifications | |||
| 1.3.6.1.4.1.7262.4.5.17.3.1 | NotificationmwrUserSession | current | This notification is raised when a change in the state of user access is recognized, a new user has logged in or an existing user has logged out. | |
| 1.3.6.1.4.1.7262.4.5.17.3.2 | NotificationmwrUserLoginFailed | current | This notification is raised when a user has failed to login. | |
| 1.3.6.1.4.1.7262.4.5.17.3.3 | NotificationmwrUserAccountChanged | current | This notification is raised when a change in user account information in the system is detected. | |
| 1.3.6.1.4.1.7262.4.5.17.3.4 | NotificationmwrUserPasswordChanged | current | This notification is raised when a user password has changed. | |
| 1.3.6.1.4.1.7262.4.5.1000 | IdentitymwrModIdentity | This specifies the contact information and the revision tracking information for the MIB module version. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ClassType | INTEGER { c1 (1), c2 (2), c3 (3), c4 (4), c5 (5), c6 (6), c7 (7), c8 (8), c9 (9), c10 (10), c11 (11), c12 (12), c13 (13) } | current | The Qos class numbers from 1 to 13. |
| FlowType | INTEGER { flow1 (1), flow2 (2), flow3 (3), flow4 (4), flow5 (5), flow6 (6), flow7 (7), flow8 (8), flow9 (9), flow10 (10), flow11 (11), flow12 (12), flow13 (13) } | current | The Qos flow numbers from 1 to 13. |
| PMIntervalType | INTEGER { quarter (1), day (2) } | current | The available interval period for statistical counters. |
| PortType | INTEGER { gi01 (1), gi02 (2), gi03 (3), gi04 (4) } | current | The list of system Ethernet ports |
| QueueType | INTEGER { q1 (1), q2 (2), q3 (3), q4 (4), q5 (5), q6 (6), q7 (7), q8 (8) } | current | The queue numbers from 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. |
| RadioInstanceType | INTEGER { radio1 (1) } | current | The radio instance type. |