MWRM-UNIT-MIB
650 objects
No module-level DESCRIPTION found.
Imported Objects
| IPV6-TC | -- Ipv6Address |
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-SMI | enterprises IpAddress OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2281 | Nodemicrowave-radio | |||
| 1.3.6.1.4.1.2281.10 | NodegenEquip | |||
| 1.3.6.1.4.1.2281.10.1 | NodegenEquipUnit | |||
| 1.3.6.1.4.1.2281.10.1.1 | NodegenEquipUnitInfo | |||
| 1.3.6.1.4.1.2281.10.1.1.1 | ScalargenEquipLastCfgTimeStamp | read-only | mandatory | This parameter represents the configuration change counter. On every conf. change this counter is increased by 1. |
| 1.3.6.1.4.1.2281.10.1.1.2 | ScalargenEquipRealTimeandDate | read-write | mandatory | This parameter specifies the real time and date Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). A date-time specification: field octets contents range 1 1-2 year 0… |
| 1.3.6.1.4.1.2281.10.1.1.3 | ScalargenEquipPMGenTime | read-only | mandatory | This value indicates the generation time of the Performance Monitor file. The value is presented in time_t format. |
| 1.3.6.1.4.1.2281.10.1.1.4 | ScalargenEquipInvGenTime | read-only | mandatory | This value indicates the generation time of the Inventory information file. The inventory file holds the configuration information of the unit. The value is pr… |
| 1.3.6.1.4.1.2281.10.1.1.5 | ScalargenEquipOperation | read-write | mandatory | Enables to perform HW reset to the indoor unit. |
| 1.3.6.1.4.1.2281.10.1.1.6 | ScalargenEquipMIBVersion | read-only | mandatory | This value indicates MIB version. |
| 1.3.6.1.4.1.2281.10.1.1.7 | ScalargenEquipUnitCLLI | read-write | mandatory | This value represents a general purpose CLLI-like text field. The CLLI field is attached to traps generated from this NE. |
| 1.3.6.1.4.1.2281.10.1.1.8 | ScalargenEquipUnitMeasurementSystem | read-write | mandatory | This value represents the measurement system used by the system. (metric or imperal). |
| 1.3.6.1.4.1.2281.10.1.1.9 | ScalargenEquipUnitIduTemperature | read-only | mandatory | This value indicates the IDU temperature, according to the measurement system chosen. (genEquipUnitMeasurementSystem) |
| 1.3.6.1.4.1.2281.10.1.1.10 | ScalargenEquipUnitIduVoltageInput | read-only | mandatory | Voltages Input. |
| 1.3.6.1.4.1.2281.10.1.1.11 | NodegenEquipUnitInfoTime | |||
| 1.3.6.1.4.1.2281.10.1.1.11.1 | ScalargenEquipUnitGMTHours | read-write | mandatory | This parameter represent the offset in hours from GMT. |
| 1.3.6.1.4.1.2281.10.1.1.11.2 | ScalargenEquipUnitGMTMins | read-write | mandatory | This parameter represents the offset in minutes from GMT. |
| 1.3.6.1.4.1.2281.10.1.1.11.6 | NodegenEquipUnitInfoNTP | |||
| 1.3.6.1.4.1.2281.10.1.1.11.6.1 | ScalargenEquipUnitInfoNTPAdmin | read-write | mandatory | This parameter represents the NTP Admin state |
| 1.3.6.1.4.1.2281.10.1.1.11.6.2 | ScalargenEquipUnitInfoNTPServerIP | read-write | mandatory | This parameter represents the IP address of the NTP Server |
| 1.3.6.1.4.1.2281.10.1.1.11.6.3 | ScalargenEquipUnitInfoNTPStatus | read-only | mandatory | This parameter represents the NTP Service status |
| 1.3.6.1.4.1.2281.10.1.1.11.6.4 | ScalargenEquipUnitInfoNTPSync | read-only | mandatory | This parameter returns the IP address of the NTP server, with which the system is currently synchronized. Returned strings: (i) - the IP address of the referen… |
| 1.3.6.1.4.1.2281.10.1.1.11.6.5 | ScalargenEquipUnitInfoNTPPollInterval | read-only | mandatory | This parameter represents the NTP polling interval in minutes |
| 1.3.6.1.4.1.2281.10.1.1.11.6.6 | TablegenEquipUnitInfoNtpStatusTable | not-accessible | mandatory | This table shows the status of the NTP (Network Time Protocol). |
| 1.3.6.1.4.1.2281.10.1.1.11.6.6.1 | RowgenEquipUnitInfoNtpStatusEntry | not-accessible | mandatory | Entry containing the data of the NTP status. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.1 | ColumngenEquipUnitInfoNtpStatusIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.2 | ColumngenEquipUnitInfoNtpStatusPollInterval | read-only | mandatory | Indicates the time interval in minutes in which the NTP client polls the server it is locked to. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.3 | ColumngenEquipUnitInfoNtpStatusSyncServerIP | read-only | mandatory | he IPv4 address of the NTP server that the client is currently locked on. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.6.1.4 | ColumngenEquipUnitInfoNtpStatusLockState | read-only | mandatory | Indicates the NTP client lock status. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.7 | TablegenEquipUnitInfoNtpConfigTable | not-accessible | mandatory | This table allows the configuration of the NTP (Network Time Protocol). |
| 1.3.6.1.4.1.2281.10.1.1.11.6.7.1 | RowgenEquipUnitInfoNtpConfigEntry | not-accessible | mandatory | Entry containing the data of the NTP configuration. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.1 | ColumngenEquipUnitInfoNtpConfigIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.2 | ColumngenEquipUnitInfoNtpConfigAdmin | read-write | mandatory | The administrative state of the NTP (Network Time Protocol) feature. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.3 | ColumngenEquipUnitInfoNtpConfigVersion | read-write | mandatory | The NTP (Network Time Protocol) version that is being used. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.4 | ColumngenEquipUnitInfoNtpConfigServerIPaddress1 | read-write | mandatory | NTP server IPv4 address that is required in first priority. |
| 1.3.6.1.4.1.2281.10.1.1.11.6.7.1.5 | ColumngenEquipUnitInfoNtpConfigServerIPaddress2 | read-write | mandatory | NTP server IPv4 address that is required in second priority. |
| 1.3.6.1.4.1.2281.10.1.1.11.7 | ScalargenEquipUnitDaylightSavingTimeStartMonth | read-write | mandatory | This parameter represents the start Month of the daylight saving time. |
| 1.3.6.1.4.1.2281.10.1.1.11.8 | ScalargenEquipUnitDaylightSavingTimeStartDay | read-write | mandatory | This parameter represents the start Day of the daylight saving time. |
| 1.3.6.1.4.1.2281.10.1.1.11.9 | ScalargenEquipUnitDaylightSavingTimeEndMonth | read-write | mandatory | This parameter represents the end month of the daylight saving time. |
| 1.3.6.1.4.1.2281.10.1.1.11.10 | ScalargenEquipUnitDaylightSavingTimeEndDay | read-write | mandatory | This parameter represents the end day of the daylight saving time. |
| 1.3.6.1.4.1.2281.10.1.1.11.11 | ScalargenEquipUnitDaylightSavingTimeOffset | read-write | mandatory | Daylight saving offset hours. for a value different then '0', at the starting date of the daylight saving time the time will jump forward in this value. at the… |
| 1.3.6.1.4.1.2281.10.1.1.11.12 | TablegenEquipUnitInfoTimeServicesTable | not-accessible | mandatory | This table contains the time services properties. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1 | RowgenEquipUnitInfoTimeServicesEntry | not-accessible | mandatory | This table entry contains the time services properties. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.1 | ColumngenEquipUnitInfoTimeServicesIndex | read-only | mandatory | The index of the table. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.2 | ColumngenEquipUnitInfoTimeServicesUtcHours | read-write | mandatory | The required hours offset relative to the UTC (Universal Time Coordinated). |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.3 | ColumngenEquipUnitInfoTimeServicesUtcMinutes | read-write | mandatory | The required minutes offset relative to the UTC (Universal Time Coordinated). |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.4 | ColumngenEquipUnitInfoTimeServicesDstStartMonth | read-write | mandatory | The month when the DST (Daylight Saving Time) is required to start. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.5 | ColumngenEquipUnitInfoTimeServicesDstStartDay | read-write | mandatory | The day when the DST (Daylight Saving Time) is required to start. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.6 | ColumngenEquipUnitInfoTimeServicesDstEndMonth | read-write | mandatory | The month when the DST (Daylight Saving Time) is required to end. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.7 | ColumngenEquipUnitInfoTimeServicesDstEndDay | read-write | mandatory | The day when the DST (Daylight Saving Time) is required to end. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.8 | ColumngenEquipUnitInfoTimeServicesDstOffset | read-write | mandatory | The required offset for DST (Daylight Saving Time) in hours. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.9 | ColumngenEquipUnitInfoTimeServicesUtcDateAndTime | read-write | mandatory | UTC (Universal Time Coordinated) date and time. |
| 1.3.6.1.4.1.2281.10.1.1.11.12.1.10 | ColumngenEquipUnitInfoTimeServicesUtcCurrentDateAndTime | read-only | mandatory | The calculated current local date & time based on the local clock, UTC and DST (Daylight Saving Time) configurations. |
| 1.3.6.1.4.1.2281.10.1.1.12 | ScalargenEquipUnitIduPowerSupply1AlarmAdmin | read-write | mandatory | This parameter is relevant only for IDU with more than one power supply units. The user can choose to disable (ignore the alarm) of one of the power supply uni… |
| 1.3.6.1.4.1.2281.10.1.1.13 | ScalargenEquipUnitIduPowerSupply2AlarmAdmin | read-write | mandatory | This parameter is relevant only for IDU with more than two power supply units. The user can choose to disable (ignore the alarm) of one of the power supply uni… |
| 1.3.6.1.4.1.2281.10.1.1.14 | NodegenEquipUnitInfoNG | |||
| 1.3.6.1.4.1.2281.10.1.1.14.1 | ScalargenEquipUnitName | read-write | mandatory | The name of the system. |
| 1.3.6.1.4.1.2281.10.1.1.14.2 | ScalargenEquipUnitDescription | read-write | mandatory | A ahort description of the system. |
| 1.3.6.1.4.1.2281.10.1.1.14.3 | ScalargenEquipUnitContactPerson | read-write | mandatory | Contact person. |
| 1.3.6.1.4.1.2281.10.1.1.14.4 | ScalargenEquipUnitLocation | read-write | mandatory | The location of the system. |
| 1.3.6.1.4.1.2281.10.1.1.14.5 | ScalargenEquipUnitLatitude | read-write | mandatory | The latitude of the system. |
| 1.3.6.1.4.1.2281.10.1.1.14.6 | ScalargenEquipUnitLongitude | read-write | mandatory | The longitude of system. |
| 1.3.6.1.4.1.2281.10.1.1.14.7 | ScalargenEquipUnitIpAddressType | read-write | mandatory | IP address Family. |
| 1.3.6.1.4.1.2281.10.1.1.14.8 | ScalargenEquipUnitInfoNGTdmInterfaceStandard | read-write | mandatory | The TDM interface standard: ETSI (Erupean) or ANSI (North American) |
| 1.3.6.1.4.1.2281.10.1.2 | NodegenEquipUnitInventory | |||
| 1.3.6.1.4.1.2281.10.1.2.1 | ScalargenEquipUnitIDUSerialNumber | read-only | mandatory | IDU Serial number. |
| 1.3.6.1.4.1.2281.10.1.2.2 | ScalargenEquipUnitIDUPartNumber | read-only | mandatory | IDU Part number. |
| 1.3.6.1.4.1.2281.10.1.2.10 | NodegenEquipUnitInventoryNG | |||
| 1.3.6.1.4.1.2281.10.1.2.10.1 | TablegenEquipInventoryTable | not-accessible | mandatory | inventory common table. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1 | RowgenEquipInventoryEntry | not-accessible | mandatory | inventory common table Entry. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1.1 | ColumngenEquipInventorySlotIndex | read-only | mandatory | slot index. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1.2 | ColumngenEquipInventoryCardName | read-only | mandatory | Card name. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1.3 | ColumngenEquipInventoryCardType | read-only | mandatory | Card type. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1.4 | ColumngenEquipInventoryCardSubType | read-only | mandatory | Card sub type. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1.5 | ColumngenEquipInventoryPartNumber | read-only | mandatory | Part number. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1.6 | ColumngenEquipInventorySerialNumber | read-only | mandatory | Serial number. |
| 1.3.6.1.4.1.2281.10.1.2.10.1.1.7 | ColumngenEquipInventoryNumberWorkingDays | read-only | mandatory | Number of working days. |
| 1.3.6.1.4.1.2281.10.1.3 | NodegenEquipUnitLicenseInfo | |||
| 1.3.6.1.4.1.2281.10.1.3.1 | ScalargenEquipUnitLicenseType | read-only | mandatory | The unit license type. |
| 1.3.6.1.4.1.2281.10.1.3.2 | ScalargenEquipUnitLicenseCode | read-write | mandatory | The user license code that determines the NE license rights. |
| 1.3.6.1.4.1.2281.10.1.3.3 | ScalargenEquipUnitACMLicense | read-only | mandatory | The ACM rights for the NE on the current license |
| 1.3.6.1.4.1.2281.10.1.3.4 | ScalargenEquipUnitSwitchAppLicense | read-only | mandatory | The switch application rights for the NE on the current license. Switch is either managed-switch or metro switch. |
| 1.3.6.1.4.1.2281.10.1.3.5 | ScalargenEquipUnitCapacityLicense | read-only | mandatory | The radio capacity allowed for the NE on the current license |
| 1.3.6.1.4.1.2281.10.1.3.6 | ScalargenEquipUnitLicenseDemoAdmin | read-write | mandatory | The Admin state of the demo mode. |
| 1.3.6.1.4.1.2281.10.1.3.7 | ScalargenEquipUnitLicenseDemoTimer | read-only | mandatory | The Demo timer in hours |
| 1.3.6.1.4.1.2281.10.1.3.8 | ScalargenEquipUnitLicenseSyncU | read-only | mandatory | This parameter indicates whether the synchronization unit license is allowed. This license allows configuring synchronization sources for clock distribution. |
| 1.3.6.1.4.1.2281.10.1.3.9 | ScalargenEquipUnitLicenseNetworkResiliency | read-only | mandatory | This parameter indicates whether the network resiliency license is allowed. This license allows configuring xSTP protocols and TDM path protection. |
| 1.3.6.1.4.1.2281.10.1.3.10 | ScalargenEquipUnitLicenseTDMCapacity | read-only | mandatory | This parameter indicates the number of TDM trails per radio allowed by the current license, if allowed. When TDM capacity license is allowed all scripts are al… |
| 1.3.6.1.4.1.2281.10.1.3.11 | ScalargenEquipUnitLicenseTDMCapacityValue | read-only | mandatory | This parameter indicates the number of TDM trails per radio allowed by the current license, if relevant. The TDM capacity value is not relevant if the genEquip… |
| 1.3.6.1.4.1.2281.10.1.3.12 | ScalargenEquipUnitLicensePerUsage | read-only | mandatory | This parameter indicates whether the per-usage license is allowed. This license allows configuring all features and causes their use to be reported to NMS. If … |
| 1.3.6.1.4.1.2281.10.1.3.13 | ScalargenEquipUnitLicenseAsymScripts | read-only | mandatory | This parameter indicates whether the asymmetrical scripts license is allowed. This license allows loading asymmetrical scripts. |
| 1.3.6.1.4.1.2281.10.1.3.14 | ScalargenEquipUnitLicenseDateCode | read-only | mandatory | This parameter indicates the generation date and time of the current installed license. Format is 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal). |
| 1.3.6.1.4.1.2281.10.1.3.15 | ScalargenEquipUnitLicenseValidationNumber | read-only | mandatory | This parameter indicates the validation number of the current installed license. It can be used as a proof (for LMS) that the license key was installed in orde… |
| 1.3.6.1.4.1.2281.10.1.3.16 | TablegenEquipUnitLicenseFeatureTable | not-accessible | mandatory | This table shows for each feature what is its valid license and whether the license has been violated or not. |
| 1.3.6.1.4.1.2281.10.1.3.16.1 | RowgenEquipUnitLicenseFeatureEntry | not-accessible | mandatory | This table entry shows for each feature what is its valid license and whether the license has been violated or not. |
| 1.3.6.1.4.1.2281.10.1.3.16.1.1 | ColumngenEquipUnitLicenseFeatureId | read-only | mandatory | A unique number which indicates the Id of the feature |
| 1.3.6.1.4.1.2281.10.1.3.16.1.2 | ColumngenEquipUnitLicenseFeatureName | read-only | mandatory | The name of the feature. |
| 1.3.6.1.4.1.2281.10.1.3.16.1.3 | ColumngenEquipUnitLicenseFeatureDescription | read-only | mandatory | A short description of the feature. |
| 1.3.6.1.4.1.2281.10.1.3.16.1.4 | ColumngenEquipUnitLicenseFeatureIsUsed | read-only | mandatory | Indicates whether the licensed feature is actually in used or its quantity that currently is in use. |
| 1.3.6.1.4.1.2281.10.1.3.16.1.5 | ColumngenEquipUnitLicenseFeatureIsAllowed | read-only | mandatory | Indicates whether a licensed feature is allowed. |
| 1.3.6.1.4.1.2281.10.1.3.16.1.6 | ColumngenEquipUnitLicenseViolationStatus | read-only | mandatory | Indicates whether the actual configuration violates the feature license. |
| 1.3.6.1.4.1.2281.10.1.3.20 | ScalargenEquipUnitLicenseCutThrough | read-only | mandatory | This parameter indicates whether the cut-through license is allowed. This license allows using the cut-through frames in the TM. |
| 1.3.6.1.4.1.2281.10.1.3.21 | ScalargenEquipUnitLicenseTdmInterfaceStandard | read-only | mandatory | The TDM interface standard: ETSI (European) or ANSI (North American). |
| 1.3.6.1.4.1.2281.10.1.4 | NodegenEquipUnitExternalAlarms | |||
| 1.3.6.1.4.1.2281.10.1.4.1 | NodegenEquipUnitAlarmInput | |||
| 1.3.6.1.4.1.2281.10.1.4.1.1 | TablegenEquipUnitAlarmInputTable | not-accessible | mandatory | External input alarm table. Using the table to manage the admin state of the external input alarm (Enable or Disable it). Set a description and severity. |
| 1.3.6.1.4.1.2281.10.1.4.1.1.1 | RowgenEquipUnitAlarmInputEntry | not-accessible | mandatory | External input alarm table. Using the table to manage the admin state of the external input alarm (Enable or Disable it). Set a description and severity. |
| 1.3.6.1.4.1.2281.10.1.4.1.1.1.1 | ColumngenEquipUnitAlarmInputCounter | read-only | mandatory | External input alarm table index. |
| 1.3.6.1.4.1.2281.10.1.4.1.1.1.2 | ColumngenEquipUnitAlarmInputAdmin | read-write | mandatory | The Admin state of the External input alarm table. |
| 1.3.6.1.4.1.2281.10.1.4.1.1.1.3 | ColumngenEquipUnitAlarmInputText | read-write | mandatory | External input alarm description. |
| 1.3.6.1.4.1.2281.10.1.4.1.1.1.4 | ColumngenEquipUnitAlarmInputSeverity | read-write | mandatory | External input alarm severity. |
| 1.3.6.1.4.1.2281.10.1.4.1.1.1.5 | ColumngenEquipUnitAlarmInputState | read-only | mandatory | The state, raised or cleared, of the external alarm input. |
| 1.3.6.1.4.1.2281.10.1.4.2 | NodegenEquipUnitAlarmOutput | |||
| 1.3.6.1.4.1.2281.10.1.4.2.1 | TablegenEquipUnitAlarmOutputTable | not-accessible | mandatory | External output alarm table. using the table to manage the admin state of the external input alarm , read the status and set an output group. |
| 1.3.6.1.4.1.2281.10.1.4.2.1.1 | RowgenEquipUnitAlarmOutputEntry | not-accessible | mandatory | External output alarm table. using the table to manage the admin state of the external input alarm , read the status and set an output group. |
| 1.3.6.1.4.1.2281.10.1.4.2.1.1.1 | ColumngenEquipUnitAlarmOutputCounter | read-only | mandatory | External output alarm table index. |
| 1.3.6.1.4.1.2281.10.1.4.2.1.1.2 | ColumngenEquipUnitAlarmOutputAdmin | read-write | mandatory | The Admin state of the External output alarm. When 'Enabled', the functionality will be: (i) If no alarms are raised, the N.O. (normally open) contact will be … |
| 1.3.6.1.4.1.2281.10.1.4.2.1.1.3 | ColumngenEquipUnitAlarmOutputStatus | read-only | mandatory | The current stauts of the External output alarm table. |
| 1.3.6.1.4.1.2281.10.1.4.2.1.1.4 | ColumngenEquipUnitAlarmOutputGroup | read-write | mandatory | The description of the group to which the external output alarm belongs. |
| 1.3.6.1.4.1.2281.10.1.5 | NodegenEquipUnitShelf | |||
| 1.3.6.1.4.1.2281.10.1.5.1 | ScalargenEquipUnitShelfInstallation | read-only | mandatory | This value indicates the NE installation type (standalone or module/card within a chassis). |
| 1.3.6.1.4.1.2281.10.1.5.2 | ScalargenEquipUnitShelfModuleRole | read-only | mandatory | This value indicates the NE module role (main unit or extention). |
| 1.3.6.1.4.1.2281.10.1.5.3 | ScalargenEquipUnitShelfSlotLabel | read-write | mandatory | Slot label is a user defined description for the module in the slot. |
| 1.3.6.1.4.1.2281.10.1.5.4 | ScalargenEquipUnitShelfArchivesOperationStatus | read-only | mandatory | Shelf-wide configuration archives [backup/restore] operation status. Used also when creating archive for unit info. Relevant only for main units. - ready(0) - … |
| 1.3.6.1.4.1.2281.10.1.5.5 | TablegenEquipUnitShelfManagmentTable | not-accessible | mandatory | This table contains information about the IDUs that may be in the shelf (population, communication status, most severe alarm) and provides the ability to backu… |
| 1.3.6.1.4.1.2281.10.1.5.5.1 | RowgenEquipUnitShelfManagmentEntry | not-accessible | mandatory | This table keeps the shelf information on all the modules in the shelf (population, status, most severe alarm) and provides the ability for backup/restore comm… |
| 1.3.6.1.4.1.2281.10.1.5.5.1.1 | ColumngenEquipUnitShelfManagmentSlot | read-only | mandatory | This value is the slot number used as an index for this table. |
| 1.3.6.1.4.1.2281.10.1.5.5.1.2 | ColumngenEquipUnitShelfManagmentSlotPopulation | read-only | mandatory | Slot population state, which indicates if the slot is occupied or not. Relevant only for main units. |
| 1.3.6.1.4.1.2281.10.1.5.5.1.3 | ColumngenEquipUnitShelfManagmentCommunicationStatus | read-only | mandatory | This value indicates if the slot can be reached or not. Relevant only for main units. |
| 1.3.6.1.4.1.2281.10.1.5.5.1.4 | ColumngenEquipUnitShelfManagmentSlotMostSevereAlarm | read-only | mandatory | This value is the most severe alarm for the module on this slot. Relevant only for main unit. |
| 1.3.6.1.4.1.2281.10.1.5.5.1.5 | ColumngenEquipUnitShelfManagmentMngSwCommand | read-write | mandatory | The command to be executed to manage SW versions. Relevant only for main units. Possible values are: - noOperation(0) - downloadUpgradeVersion(1) - upgrade(2) … |
| 1.3.6.1.4.1.2281.10.1.5.5.1.6 | ColumngenEquipUnitShelfManagmentSlotReset | read-write | mandatory | This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index. |
| 1.3.6.1.4.1.2281.10.1.5.5.1.7 | ColumngenEquipUnitShelfManagmentSlotIp | read-write | mandatory | Slot SNMP Management IP address. |
| 1.3.6.1.4.1.2281.10.1.5.6 | ScalargenEquipUnitShelfReset | read-write | mandatory | This parameter allows resetting of entire shelf. |
| 1.3.6.1.4.1.2281.10.1.5.7 | ScalargenEquipUnitshelfAllODUAdmin | read-write | mandatory | The unit is configured as all outdoor unit, enable or disable it. |
| 1.3.6.1.4.1.2281.10.1.5.8 | TablegenEquipUnitShelfSlotConfigTable | not-accessible | mandatory | Slot configuration table. |
| 1.3.6.1.4.1.2281.10.1.5.8.1 | RowgenEquipUnitShelfSlotConfigEntry | not-accessible | mandatory | This table allows configuration of card population parameters. |
| 1.3.6.1.4.1.2281.10.1.5.8.1.1 | ColumngenEquipUnitShelfSlotConfigSlotID | read-only | mandatory | This value is the slot number used as an index for this table. |
| 1.3.6.1.4.1.2281.10.1.5.8.1.2 | ColumngenEquipUnitShelfSlotConfigExpectedCardType | read-write | mandatory | Expected card type in current slot. |
| 1.3.6.1.4.1.2281.10.1.5.8.1.3 | ColumngenEquipUnitShelfSlotConfigLabel | read-write | mandatory | Slot label. |
| 1.3.6.1.4.1.2281.10.1.5.8.1.4 | ColumngenEquipUnitShelfSlotConfigAdmin | read-write | mandatory | Slot admin state. |
| 1.3.6.1.4.1.2281.10.1.5.8.1.5 | ColumngenEquipUnitShelfSlotConfigSlotReset | read-write | mandatory | This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index. |
| 1.3.6.1.4.1.2281.10.1.5.9 | TablegenEquipUnitShelfTccConfigTable | not-accessible | mandatory | TCC configuration table. |
| 1.3.6.1.4.1.2281.10.1.5.9.1 | RowgenEquipUnitShelfTccConfigEntry | not-accessible | mandatory | This table allows configuration of TCC population parameters. |
| 1.3.6.1.4.1.2281.10.1.5.9.1.1 | ColumngenEquipUnitShelfTccConfigSlotID | read-only | mandatory | This value is the TCC slot number used as an index for this table. |
| 1.3.6.1.4.1.2281.10.1.5.9.1.2 | ColumngenEquipUnitShelfTccConfigExpectedCardType | read-write | mandatory | Expected card type in current TCC slot. |
| 1.3.6.1.4.1.2281.10.1.5.9.1.3 | ColumngenEquipUnitShelfTccConfigLabel | read-write | mandatory | TCC label. |
| 1.3.6.1.4.1.2281.10.1.5.9.1.4 | ColumngenEquipUnitShelfTccConfigAdmin | read-write | mandatory | TCC admin state. |
| 1.3.6.1.4.1.2281.10.1.5.9.1.5 | ColumngenEquipUnitShelfTccConfigReset | read-write | mandatory | This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index. |
| 1.3.6.1.4.1.2281.10.1.5.10 | TablegenEquipUnitShelfSlotStatusTable | not-accessible | mandatory | This table contains information about the status of the cards currently inserted in the system. |
| 1.3.6.1.4.1.2281.10.1.5.10.1 | RowgenEquipUnitShelfSlotStatusEntry | not-accessible | mandatory | This table entry contains information about the status of the cards currently inserted in the system. |
| 1.3.6.1.4.1.2281.10.1.5.10.1.1 | ColumngenEquipUnitShelfSlotStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.1.5.10.1.2 | ColumngenEquipUnitShelfSlotStatusOccupancy | read-only | mandatory | Slot Occupancy. |
| 1.3.6.1.4.1.2281.10.1.5.10.1.3 | ColumngenEquipUnitShelfSlotStatusAllowedCardTypes | read-only | mandatory | shelf slot allowed card types. |
| 1.3.6.1.4.1.2281.10.1.5.10.1.4 | ColumngenEquipUnitShelfSlotStatusCardType | read-only | mandatory | Shelf Slot card type. |
| 1.3.6.1.4.1.2281.10.1.5.10.1.5 | ColumngenEquipUnitShelfSlotStatusOperationalState | read-only | mandatory | Operational State. |
| 1.3.6.1.4.1.2281.10.1.5.10.1.6 | ColumngenEquipUnitShelfSlotStatusCommunication | read-only | mandatory | Slot Operational State. |
| 1.3.6.1.4.1.2281.10.1.5.11 | TablegenEquipUnitShelfTccStatusTable | not-accessible | mandatory | This table contains information about the status of the TCC currently inserted in the system. |
| 1.3.6.1.4.1.2281.10.1.5.11.1 | RowgenEquipUnitShelfTccStatusEntry | not-accessible | mandatory | This table entry contains information about the status of the TCC currently inserted in the system. |
| 1.3.6.1.4.1.2281.10.1.5.11.1.1 | ColumngenEquipUnitShelfTccStatusSlotID | read-only | mandatory | Slot where PW-LIC is inserted. |
| 1.3.6.1.4.1.2281.10.1.5.11.1.2 | ColumngenEquipUnitShelfTccStatusOccupancy | read-only | mandatory | Slot Occupancy. |
| 1.3.6.1.4.1.2281.10.1.5.11.1.3 | ColumngenEquipUnitShelfTccStatusAllowedCardTypes | read-only | mandatory | shelf slot allowed card types. |
| 1.3.6.1.4.1.2281.10.1.5.11.1.4 | ColumngenEquipUnitShelfTccStatusCardType | read-only | mandatory | Shelf Slot card type. |
| 1.3.6.1.4.1.2281.10.1.5.11.1.5 | ColumngenEquipUnitShelfTccStatusOperationalState | read-only | mandatory | Operational State. |
| 1.3.6.1.4.1.2281.10.1.5.11.1.6 | ColumngenEquipUnitShelfTccStatusCommunication | read-only | mandatory | Slot Operational State. |
| 1.3.6.1.4.1.2281.10.1.5.12 | TablegenEquipUnitShelfManagmentSeverityTable | not-accessible | mandatory | This table indicates the number of current raised alarms per slot. |
| 1.3.6.1.4.1.2281.10.1.5.12.1 | RowgenEquipUnitShelfManagmentSeverityEntry | not-accessible | mandatory | This table entry indicates the number of current raised alarms per slot. |
| 1.3.6.1.4.1.2281.10.1.5.12.1.1 | ColumngenEquipUnitShelfManagmentSeveritySlot | read-only | mandatory | The slot ID number that identifies it. |
| 1.3.6.1.4.1.2281.10.1.5.12.1.2 | ColumngenEquipUnitShelfManagmentSeverityCritical | read-only | mandatory | The number of alarms with 'Critical' severity. |
| 1.3.6.1.4.1.2281.10.1.5.12.1.3 | ColumngenEquipUnitShelfManagmentSeverityMajor | read-only | mandatory | The number of alarms with 'Major' severity. |
| 1.3.6.1.4.1.2281.10.1.5.12.1.4 | ColumngenEquipUnitShelfManagmentSeverityMinor | read-only | mandatory | The number of alarms with 'Minor' severity. |
| 1.3.6.1.4.1.2281.10.1.5.12.1.5 | ColumngenEquipUnitShelfManagmentSeverityWarning | read-only | mandatory | The number of alarms with 'Warning' severity. |
| 1.3.6.1.4.1.2281.10.1.5.12.1.6 | ColumngenEquipUnitShelfManagmentSeverityIndeterminate | read-only | mandatory | The number of alarms with 'Indeterminate' severity. |
| 1.3.6.1.4.1.2281.10.1.5.13 | TablegenEquipUnitShelfPdcFanStatusTable | not-accessible | mandatory | This table shows for fun card. |
| 1.3.6.1.4.1.2281.10.1.5.13.1 | RowgenEquipUnitShelfPdcFanStatusEntry | not-accessible | mandatory | This table shows for fun card. |
| 1.3.6.1.4.1.2281.10.1.5.13.1.1 | ColumngenEquipUnitShelfPdcFanStatusPdcFanId | read-only | mandatory | pdc-fan-id |
| 1.3.6.1.4.1.2281.10.1.5.13.1.2 | ColumngenEquipUnitShelfPdcFanStatusPdcFanExMonitor | read-write | mandatory | pdc-fan-existent monitor. |
| 1.3.6.1.4.1.2281.10.1.5.13.1.3 | ColumngenEquipUnitShelfPdcFanStatusPdcFanOccupancy | read-only | mandatory | card_occupancy. |
| 1.3.6.1.4.1.2281.10.1.5.13.1.4 | ColumngenEquipUnitShelfPdcFanStatusPdcFanCardType | read-only | mandatory | Indicates whether the licensed feature is actually in used or its quantity that currently is in use. |
| 1.3.6.1.4.1.2281.10.1.5.14 | TablegenEquipUnitShelfAbcMuxTable | not-accessible | mandatory | This table allows enabling/disabling each ABC MUX group. ABC groups can be defined on top of these MUX. |
| 1.3.6.1.4.1.2281.10.1.5.14.1 | RowgenEquipUnitShelfAbcMuxEntry | not-accessible | mandatory | This table entry allows enabling/disabling each ABC MUX group. ABC groups can be defined on top of these MUX. |
| 1.3.6.1.4.1.2281.10.1.5.14.1.1 | ColumngenEquipUnitShelfAbcMuxNumber | read-only | mandatory | Identifier for each of the possible MUXs which choose between using the ABC trunks or the port for multi-directional radios |
| 1.3.6.1.4.1.2281.10.1.5.14.1.2 | ColumngenEquipUnitShelfAbcMuxAdmin | read-write | mandatory | Enables the MUX (for ABC) or disables it (for multi-directional radios). |
| 1.3.6.1.4.1.2281.10.1.5.23 | ScalargenEquipUnitShelfMultiplexTrafficSource | read-write | mandatory | The parameter multiplex traffic between slot 1 and slot 12. |
| 1.3.6.1.4.1.2281.10.1.5.24 | ScalargenEquipUnitShelfMaskUnderVoltageAlarmFirstPowerFeed | read-write | mandatory | Mask undervoltage alarm on 1st DC power feed. |
| 1.3.6.1.4.1.2281.10.1.5.25 | ScalargenEquipUnitShelfMaskUnderVoltageAlarmSecondPowerFeed | read-write | mandatory | Mask undervoltage alarm on 2nd DC power feed |
| 1.3.6.1.4.1.2281.10.1.6 | NodegenEquipProtection | |||
| 1.3.6.1.4.1.2281.10.1.6.1 | ScalargenEquipProtectionAdmin | read-write | mandatory | The Admin mode of the protection. In case of protection2Plus2Hsb this parameter should be configured in the main and extension slots. |
| 1.3.6.1.4.1.2281.10.1.6.2 | ScalargenEquipProtectionMode | read-only | mandatory | In protection mode, the card can be either active or standby |
| 1.3.6.1.4.1.2281.10.1.6.3 | ScalargenEquipProtectionMateIPAddr | read-only | mandatory | Same parameter as genEquipNetworkMateIp. In case of 1+1 protection it is the protected card (Mate) IP address. In case of 2+2 protection it is the IP address o… |
| 1.3.6.1.4.1.2281.10.1.6.4 | ScalargenEquipProtectionMateMACAddr | read-only | mandatory | In case of 1+1 protection it is protected card (Mate) MAC address In case of 2+2 protection it is the IP address of the protected unit. |
| 1.3.6.1.4.1.2281.10.1.6.5 | ScalargenEquipProtectionRadioExcessiveBERSwitch | read-write | mandatory | The Admin state of an Excessive BER threshold. When enabled, crossing the Excessive BER threshold will cause a protection switch. |
| 1.3.6.1.4.1.2281.10.1.6.6 | ScalargenEquipProtectionLockout | read-write | mandatory | This parameter provides the ability to lock the mode of each card in the protection, meaning to force the fact that protection switch will not occur. |
| 1.3.6.1.4.1.2281.10.1.6.7 | ScalargenEquipProtectionForceSwitch | read-write | mandatory | This parameter is a command that forces a protection switch regardless of the state of the standby card. |
| 1.3.6.1.4.1.2281.10.1.6.8 | ScalargenEquipProtectionManualSwitch | read-write | mandatory | This parameter is a command that performs manaual protection switch. |
| 1.3.6.1.4.1.2281.10.1.6.9 | ScalargenEquipProtectionCopyToMateComand | read-write | mandatory | Setting this parameter to On will copy configured parameters from the active to the standby unit. |
| 1.3.6.1.4.1.2281.10.1.6.10 | ScalargenEquipProtectionCopyToMateStatus | read-only | mandatory | This parameter represents the status of the copy-to-mate command when protection is enabled. - ready(0) - inProgress(1), - success(2), - failure(3) |
| 1.3.6.1.4.1.2281.10.1.6.11 | ScalargenEquipProtectionMultiUnitLAGAdmin | read-write | mandatory | This parameter enables the Multi Unit LAG feature. It can be activated only in Single Pipe configuration and only when protection is active (either 1+1 or 2+2). |
| 1.3.6.1.4.1.2281.10.1.6.12 | ScalargenEquipProtectionRevertiveAdmin | read-write | mandatory | Enable/Disable revertive protection mode. In revertive protection mode one IDU will be defined as a Primary and the other will be Secondary. Revertive protecti… |
| 1.3.6.1.4.1.2281.10.1.6.13 | ScalargenEquipProtectionRevertivePrimaryIDU | read-write | mandatory | Decides whether upper or lower IDU will be primary. When placed in a shelf, the upper will be the upper slot in the shelf. When working in stand-alone mode, th… |
| 1.3.6.1.4.1.2281.10.1.6.14 | ScalargenEquipProtectionRevertiveMinTimer | read-write | mandatory | Minimal revertive protection timer period. |
| 1.3.6.1.4.1.2281.10.1.6.15 | ScalargenEquipProtectionRevertiveMaxNumOfTries | read-write | mandatory | Maximal number of revertive protection tries. Used to prevent instability. Revertive protection will give up trying to switch to the primary standby IDU path a… |
| 1.3.6.1.4.1.2281.10.1.6.16 | ScalargenEquipProtectionRevertiveTimerMultiplier | read-write | mandatory | A factor that increases the revertive timer period after each try. Setting 1 value will leave the timer period constantly at its minimal value. |
| 1.3.6.1.4.1.2281.10.1.6.17 | ScalargenEquipProtectionAspRevertive | read-write | mandatory | n Smart Pipe HSB mode , this parameter causes the Ethernet line port to be muted upon a complete failure of the radio signal (in both active and standby units) |
| 1.3.6.1.4.1.2281.10.1.7 | NodegenEquipDiversity | |||
| 1.3.6.1.4.1.2281.10.1.7.1 | ScalargenEquipDiversityType | read-write | mandatory | this parameter sets the type of hitless diversity to be used. Notice that only if protection is enabled this has any effect. |
| 1.3.6.1.4.1.2281.10.1.7.2 | ScalargenEquipDiversityRevertiveMode | read-write | mandatory | this parameter sets whether hitless switches are revertive in the event that the primary radio channel doesn't have any errors. |
| 1.3.6.1.4.1.2281.10.1.7.3 | ScalargenEquipDiversityPrimaryRadio | read-write | mandatory | this parameter sets which IDU contains the primary radio channel to revert to. |
| 1.3.6.1.4.1.2281.10.1.7.4 | ScalargenEquipDiversityRevertiveTimer | read-write | mandatory | This parameter sets the amount of seconds that must pass without a failure in the primary radio before doing a revertive switch. |
| 1.3.6.1.4.1.2281.10.1.7.5 | ScalargenEquipDiversityForceActive | read-write | mandatory | This parameter allows forcing incoming traffic to be taken from either of the radios (or none) for testing purposes. |
| 1.3.6.1.4.1.2281.10.1.7.6 | ScalargenEquipDiversitySwitchCounter | read-only | mandatory | This parameter shows the number of hitless switches performed since last time counter was cleared. |
| 1.3.6.1.4.1.2281.10.1.7.7 | ScalargenEquipDiversitySwitchCounterClear | read-write | mandatory | This parameter allows clearing of switch counter. |
| 1.3.6.1.4.1.2281.10.1.7.8 | ScalargenEquipDiversityReceiveRadio | read-only | mandatory | This parameter shows from which radio the traffic is currently being taken. |
| 1.3.6.1.4.1.2281.10.3 | NodegenEquipFault | |||
| 1.3.6.1.4.1.2281.10.3.1 | NodegenEquipCurrentAlarm | |||
| 1.3.6.1.4.1.2281.10.3.1.1 | ScalargenEquipCurrentAlarmLastChangeCounter | read-only | mandatory | This counter is initialized with a random number after resest, and incremented on each change in the CurrentAlarmTable |
| 1.3.6.1.4.1.2281.10.3.1.2 | TablegenEquipCurrentAlarmTable | not-accessible | mandatory | This table includes the current alarm (when a RAISED trap is sent, an alarm is added to the table, when a CLEAR trap is sent, the alarm is removed). |
| 1.3.6.1.4.1.2281.10.3.1.2.1 | RowgenEquipCurrentAlarmEntry | not-accessible | mandatory | Entry containing the info of current RAISED traps. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.1 | ColumngenEquipCurrentAlarmCounter | read-only | mandatory | A running counter of open alarms, incremented upon each new alarm. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.2 | ColumngenEquipCurrentAlarmRaisedTimeT | read-only | mandatory | The rasied time of this alarm. Time in seconds since January 1, 1970 00:00 UTC. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.3 | ColumngenEquipCurrentAlarmId | read-only | mandatory | Alarm ID. List of alarm IDs is available in the MIB Ref. Guide. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.4 | ColumngenEquipCurrentAlarmName | read-only | mandatory | Alarm name (the parameter and entity in the CLI) for example 'radio/framer/radio-lof' |
| 1.3.6.1.4.1.2281.10.3.1.2.1.5 | ColumngenEquipCurrentAlarmInstance | read-only | mandatory | In the case of alarms that may have several appereances (at interfaces, channels, VCs, etc.), this parameter indicates the instance of the alarm. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.6 | ColumngenEquipCurrentAlarmSeverity | read-only | mandatory | The current Alarm severity the values can be: - indeterminate(0) - critical(1) - major(2) - minor(3) - warning(4) - cleared(5) |
| 1.3.6.1.4.1.2281.10.3.1.2.1.7 | ColumngenEquipCurrentAlarmIfIndex | read-only | mandatory | Interface Index where the alarm occurred, alarms that are not associated with specific interfaces will have the following value: For a non-interface alarm, the… |
| 1.3.6.1.4.1.2281.10.3.1.2.1.8 | ColumngenEquipCurrentAlarmModule | read-only | mandatory | The module of the alarm. Possible values are 'IDU' or 'RFU'. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.9 | ColumngenEquipCurrentAlarmDesc | read-only | mandatory | The alarm description (same as the description in the sent trap). |
| 1.3.6.1.4.1.2281.10.3.1.2.1.10 | ColumngenEquipCurrentAlarmProbableCause | read-only | mandatory | The alarm probable cause. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.11 | ColumngenEquipCurrentAlarmCorrectiveActions | read-only | mandatory | The alarm corrective actions. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.12 | ColumngenEquipCurrentAlarmState | read-only | mandatory | The state of the alarm (cleared or rasied). |
| 1.3.6.1.4.1.2281.10.3.1.2.1.13 | ColumngenEquipCurrentAlarmSlotId | read-only | mandatory | The ID of the slot originating the alarm. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.14 | ColumngenEquipCurrentAlarmAdditionalInfo | read-only | mandatory | Additional information that may further qualify the source of the alarm. |
| 1.3.6.1.4.1.2281.10.3.1.2.1.15 | ColumngenEquipCurrentAlarmUserText | read-only | mandatory | An additional description of the event or fault, or any other information that user wants to attach to it. |
| 1.3.6.1.4.1.2281.10.3.1.3 | ScalargenEquipMostSevereAlarm | read-only | mandatory | The severity of the most severe alarm in the system |
| 1.3.6.1.4.1.2281.10.3.1.4 | ScalargenEquipAlarmConfigDefault | read-write | mandatory | Allows to revert back to the default values of all alarm configurations |
| 1.3.6.1.4.1.2281.10.3.1.5 | TablegenEquipAlarmConfigTable | not-accessible | mandatory | This table allows system alarms configuration. |
| 1.3.6.1.4.1.2281.10.3.1.5.1 | RowgenEquipAlarmConfigEntry | not-accessible | mandatory | This table entry allows system alarms configuration. |
| 1.3.6.1.4.1.2281.10.3.1.5.1.1 | ColumngenEquipAlarmConfigId | read-only | mandatory | he alarm unique Id number that identifies it. |
| 1.3.6.1.4.1.2281.10.3.1.5.1.2 | ColumngenEquipAlarmConfigSeverity | read-write | mandatory | The perceived severity of the raised alarm. |
| 1.3.6.1.4.1.2281.10.3.1.5.1.3 | ColumngenEquipAlarmConfigDescr | read-write | mandatory | The description of the raised alarm. |
| 1.3.6.1.4.1.2281.10.3.1.5.1.4 | ColumngenEquipAlarmConfigAdditionalText | read-write | mandatory | An additional description of the fault, or any other information that user wants to attach to it. |
| 1.3.6.1.4.1.2281.10.3.1.5.1.5 | ColumngenEquipAlarmServiceAffect | read-write | mandatory | Indicates whether the raised alarm affects a service. |
| 1.3.6.1.4.1.2281.10.3.2 | NodegenEquipTrapCfg | |||
| 1.3.6.1.4.1.2281.10.3.2.1 | TablegenEquipTrapCfgMgrTable | not-accessible | mandatory | This table indicates the Trap manager list. |
| 1.3.6.1.4.1.2281.10.3.2.1.1 | RowgenEquipTrapCfgMgrEntry | not-accessible | mandatory | Entry containing the manager IP addresses and the trap filter options. |
| 1.3.6.1.4.1.2281.10.3.2.1.1.1 | ColumngenEquipTrapCfgMgrId | read-only | mandatory | This value indicates an index of a specific manager |
| 1.3.6.1.4.1.2281.10.3.2.1.1.2 | ColumngenEquipTrapCfgMgrAdmin | read-write | mandatory | This value indicates an administrative state of a specific manager. disable - will not send traps to this trap manager. |
| 1.3.6.1.4.1.2281.10.3.2.1.1.3 | ColumngenEquipTrapCfgMgrIP | read-write | mandatory | This value indicates the manager's IP address. |
| 1.3.6.1.4.1.2281.10.3.2.1.1.4 | ColumngenEquipTrapCfgMgrPort | read-write | mandatory | The Port for sending the trap for each manager (possible values: 70-65535) |
| 1.3.6.1.4.1.2281.10.3.2.1.1.5 | ColumngenEquipTrapCfgMgrName | read-write | mandatory | The name of the manager configured to receive the traps |
| 1.3.6.1.4.1.2281.10.3.2.1.1.6 | ColumngenEquipTrapCfgMgrCommunity | read-write | mandatory | The manager trap community configured. |
| 1.3.6.1.4.1.2281.10.3.2.1.1.7 | ColumngenEquipTrapCfgMgrSeverityFilter | read-write | mandatory | This is a bit mask value for masking traps according to its severity. There is a bit for each severity. If the relevant bit is on (1), the Agent will send trap… |
| 1.3.6.1.4.1.2281.10.3.2.1.1.8 | ColumngenEquipTrapCfgMgrStatusChangeFilter | read-write | mandatory | This value represents the mode in which the traps are sent: If the filter is set to ON - only traps that change the severity of the system are sent. If the fil… |
| 1.3.6.1.4.1.2281.10.3.2.1.1.9 | ColumngenEquipTrapCfgMgrCLLI | read-write | mandatory | Common Language Location Identifier (maximum length: 100 chars) |
| 1.3.6.1.4.1.2281.10.3.2.1.1.10 | ColumngenEquipTrapCfgMgrHeartbeatPeriod | read-write | mandatory | This item defines the interval (in minutes) between each heartbeat trap. A value of '0' disables this feature. |
| 1.3.6.1.4.1.2281.10.3.2.1.1.11 | ColumngenEquipTrapCfgMgrIPv6 | read-write | mandatory | The IP-v6 address of the trap manage) |
| 1.3.6.1.4.1.2281.10.3.2.1.1.12 | ColumngenEquipTrapCfgMgrV3User | read-write | mandatory | The manager trap V3 user name configured |
| 1.3.6.1.4.1.2281.10.3.3 | NodegenEquipEventLog | |||
| 1.3.6.1.4.1.2281.10.3.3.1 | TablegenEquipEventLogTable | not-accessible | mandatory | This table includes the event log. |
| 1.3.6.1.4.1.2281.10.3.3.1.1 | RowgenEquipEventLogEntry | not-accessible | mandatory | Entry containing the info of the event log table. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.1 | ColumngenEquipEventLogCounter | read-only | mandatory | The event counter. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.2 | ColumngenEquipEventLogRaisedTimeT | read-only | mandatory | The rasied time of this event. Time in seconds since January 1, 1970 00:00 UTC. (time_t format) |
| 1.3.6.1.4.1.2281.10.3.3.1.1.3 | ColumngenEquipEventLogSeverity | read-only | mandatory | The event severity, possible values are: - indeterminate(0), - critical(1) - major(2) - minor(3) - warning(4) - cleared(5) |
| 1.3.6.1.4.1.2281.10.3.3.1.1.4 | ColumngenEquipEventLogModule | read-only | mandatory | The module of the event. ('IDU' or 'RFU') |
| 1.3.6.1.4.1.2281.10.3.3.1.1.5 | ColumngenEquipEventLogDesc | read-only | mandatory | The event description (same as the description in the sent trap). |
| 1.3.6.1.4.1.2281.10.3.3.1.1.6 | ColumngenEquipEventLogState | read-only | mandatory | The state of the event or alarm. In case of alarm, 'cleard' or 'raised'. In case of event, 'event'. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.7 | ColumngenEquipEventLogProbableCause | read-only | mandatory | The probable cause that may be the reason for the event. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.8 | ColumngenEquipEventLogCorrectiveActions | read-only | mandatory | Some possible suggested corrective actions in order to eliminate the raised alarm. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.9 | ColumngenEquipEventLogAdditionalInfo | read-only | mandatory | Additional information that may further qualify the source of the event. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.10 | ColumngenEquipEventLogUserText | read-only | mandatory | An additional description of the event or fault, or any other information that user wants to attach to it. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.11 | ColumngenEquipEventLogIfIndex | read-only | mandatory | If Index of the originated source. |
| 1.3.6.1.4.1.2281.10.3.3.1.1.12 | ColumngenEquipEventLogId | read-only | mandatory | The Id of the event. |
| 1.3.6.1.4.1.2281.10.3.3.2 | ScalargenEquipEventLogClear | read-write | mandatory | The clear event log command. If enabled, will clear the event log. |
| 1.3.6.1.4.1.2281.10.3.3.3 | ScalargenEquipEventLogLastChangeCounter | read-only | mandatory | This counter is initialized with a random number after reset, and incremented on each change in the EventLogTable |
| 1.3.6.1.4.1.2281.10.3.4 | ScalargenEquipFaultErrno | read-only | mandatory | The application last error number. List of Errnos are located in the MIB Ref Guide. |
| 1.3.6.1.4.1.2281.10.3.5 | ScalargenEquipFaultErrDescr | read-only | mandatory | The application last error description. List of Errnos are located in the MIB Ref Guide. |
| 1.3.6.1.4.1.2281.10.4 | NodegenEquipMng | |||
| 1.3.6.1.4.1.2281.10.4.1 | NodegenEquipMngSw | |||
| 1.3.6.1.4.1.2281.10.4.1.1 | ScalargenEquipMngSwServerUrl | read-write | mandatory | Remote SW Update Server URL where SW updates reside |
| 1.3.6.1.4.1.2281.10.4.1.2 | ScalargenEquipMngSwServerLogin | read-write | mandatory | Remote server login |
| 1.3.6.1.4.1.2281.10.4.1.3 | ScalargenEquipMngSwServerPassword | read-write | mandatory | Remote server password |
| 1.3.6.1.4.1.2281.10.4.1.4 | ScalargenEquipMngSwProxyUrl | read-only | obsolete | Proxy Server Url. This parameter is obsolete and should not be in used. |
| 1.3.6.1.4.1.2281.10.4.1.5 | ScalargenEquipMngSwProxyLogin | read-only | obsolete | Proxy server login This parameter is obsolete and should not be in used. |
| 1.3.6.1.4.1.2281.10.4.1.6 | ScalargenEquipMngSwProxyPassword | read-only | obsolete | Proxy server password This parameter is obsolete and should not be in used. |
| 1.3.6.1.4.1.2281.10.4.1.7 | ScalargenEquipMngSwDownloadStatus | read-only | mandatory | Download software status. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) |
| 1.3.6.1.4.1.2281.10.4.1.8 | ScalargenEquipMngSwInstallStatus | read-only | mandatory | Install software status. Possible values are: - ready(0) - inProgress(1) - success(2) - failure(3) |
| 1.3.6.1.4.1.2281.10.4.1.9 | ScalargenEquipMngSwCommand | read-write | mandatory | The command that is executed to manage SW versions. Depending on the value given, a different operation will be carried out involving FTP and/or version instal… |
| 1.3.6.1.4.1.2281.10.4.1.10 | ScalargenEquipMngSwInstalledIduVersion | read-only | mandatory | This value indicates the Package Version of the installed IDU SW |
| 1.3.6.1.4.1.2281.10.4.1.11 | ScalargenEquipMngSwInstalledRfuVersion | read-only | mandatory | This value indicates the Package version of the installed RFU SW. |
| 1.3.6.1.4.1.2281.10.4.1.13 | NodegenEquipMngSwVersions | |||
| 1.3.6.1.4.1.2281.10.4.1.13.1 | TablegenEquipMngSwIDUVersionsTable | not-accessible | mandatory | This table contains all IDU running versions. |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1 | RowgenEquipMngSwIDUVersionsEntry | not-accessible | mandatory | Entry containing the info of the IDU Versions table. |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.1 | ColumngenEquipMngSwIDUVersionsCounter | read-only | mandatory | This is the index of this table. |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.2 | ColumngenEquipMngSwIDUVersionsPackageName | read-only | mandatory | The package name |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.3 | ColumngenEquipMngSwIDUVersionsTargetDevice | read-only | mandatory | The Target device within the NE (i.e. Modem, FPGA, IDU) |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.4 | ColumngenEquipMngSwIDUVersionsRunningVersion | read-only | mandatory | The running version. |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.5 | ColumngenEquipMngSwIDUVersionsInstalledVersion | read-only | mandatory | The installed version is similar to the running version, besides packages that are not currently running. Those packages will have in the running version 'N/A'… |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.6 | ColumngenEquipMngSwIDUVersionsUpgradePackage | read-only | mandatory | In case the user performs an upgrade, this version will be the running/installed version |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.7 | ColumngenEquipMngSwIDUVersionsDowngradePackage | read-only | mandatory | In case the user performs downgrade, this version will be the running/installed version. |
| 1.3.6.1.4.1.2281.10.4.1.13.1.1.8 | ColumngenEquipMngSwIDUVersionsResetType | read-only | mandatory | Minimum level of reset required to update the software in the relevant module. |
| 1.3.6.1.4.1.2281.10.4.1.13.2 | TablegenEquipMngSwTimerTable | not-accessible | mandatory | This table contains all IDU running versions. |
| 1.3.6.1.4.1.2281.10.4.1.13.2.1 | RowgenEquipMngSwTimerEntry | not-accessible | mandatory | Entry containing the info of the IDU Versions table. |
| 1.3.6.1.4.1.2281.10.4.1.13.2.1.1 | ColumngenEquipMngSwTimerSlotNumber | read-only | mandatory | The slot ID of the unit for this timer; 0 is for stand-alone units. |
| 1.3.6.1.4.1.2281.10.4.1.13.2.1.2 | ColumngenEquipMngSwTimerInstallationTimer | read-write | mandatory | The timer (in minutes) for software installation operations to this unit. |
| 1.3.6.1.4.1.2281.10.4.1.13.2.1.3 | ColumngenEquipMngSwTimerTimeToInstall | read-only | mandatory | The amount of time (in seconds) from now for the unit to perform software installation. Zero denotes that no operation has been requested. |
| 1.3.6.1.4.1.2281.10.4.1.13.2.1.4 | ColumngenEquipMngSwTimerTimerAbort | read-write | mandatory | This parameter is used to stop the count-down to the software update action. |
| 1.3.6.1.4.1.2281.10.4.1.13.10 | ScalargenEquipMngSwFTPTimer | read-write | mandatory | Time (in seconds) until file transfer is failed. |
| 1.3.6.1.4.1.2281.10.4.1.14 | ScalargenEquipMngSwInstallationTimer | read-write | mandatory | The timer (in minutes) for timed software installation operations to this unit |
| 1.3.6.1.4.1.2281.10.4.1.15 | ScalargenEquipMngSwTimeToInstall | read-only | mandatory | The amount of time (in minutes) from now for the unit to perform software installation. Zero denotes that no operation has been requested |
| 1.3.6.1.4.1.2281.10.4.1.16 | ScalargenEquipMngSwUpgradeCommonRfuVersion | read-only | mandatory | This value indicates the Package version of the installed RFU SW. |
| 1.3.6.1.4.1.2281.10.4.1.17 | ScalargenEquipMngSwDowngradeCommonRfuVersion | read-only | mandatory | This value indicates the Package version of the installed RFU SW. |
| 1.3.6.1.4.1.2281.10.4.1.18 | TablegenEquipMngSwFileTransferTable | not-accessible | mandatory | This table allows configuring the details of the external server where software versions should be located. |
| 1.3.6.1.4.1.2281.10.4.1.18.1 | RowgenEquipMngSwFileTransferEntry | not-accessible | mandatory | Entry containing the info of software management file transfer. |
| 1.3.6.1.4.1.2281.10.4.1.18.1.1 | ColumngenEquipMngSwFileTransferIndex | read-only | mandatory | The index of the table. |
| 1.3.6.1.4.1.2281.10.4.1.18.1.2 | ColumngenEquipMngSwFileTransferProtocol | read-write | mandatory | The protocol to use to transfer the files between the system and an external computer. |
| 1.3.6.1.4.1.2281.10.4.1.18.1.3 | ColumngenEquipMngSwFileTransferUserName | read-write | mandatory | User name for access to the configuration files location. |
| 1.3.6.1.4.1.2281.10.4.1.18.1.4 | ColumngenEquipMngSwFileTransferPassword | read-write | mandatory | Password for access to the software version files location. |
| 1.3.6.1.4.1.2281.10.4.1.18.1.5 | ColumngenEquipMngSwFileTransferAddress | read-write | mandatory | IP address of the computer where software version files are to be taken from. |
| 1.3.6.1.4.1.2281.10.4.1.18.1.6 | ColumngenEquipMngSwFileTransferPath | read-write | mandatory | Location of the files in the external server. |
| 1.3.6.1.4.1.2281.10.4.1.18.1.7 | ColumngenEquipMngSwFileTransferIpv6Address | read-write | mandatory | IPv6 Server Address. |
| 1.3.6.1.4.1.2281.10.4.1.19 | TablegenEquipMngSwFileTransferStatusTable | not-accessible | mandatory | This table shows the status of the current software version file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.1.19.1 | RowgenEquipMngSwFileTransferStatusEntry | not-accessible | mandatory | Entry containing the info of software management file transfer status. |
| 1.3.6.1.4.1.2281.10.4.1.19.1.1 | ColumngenEquipMngSwFileTransferStatusIndex | read-only | mandatory | The index of the table.. |
| 1.3.6.1.4.1.2281.10.4.1.19.1.2 | ColumngenEquipMngSwFileTransferStatusResult | read-only | mandatory | Status of the current file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.1.19.1.3 | ColumngenEquipMngSwFileTransferPercentageDone | read-only | mandatory | An indication of the progress of the process of the current file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.1.19.1.4 | ColumngenEquipMngSwFileTransferPercentageDoneStandBy | read-only | mandatory | An indication of the progress of the process of the current internal file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.1.19.1.5 | ColumngenEquipMngSwFileTransferStatusResultStandBy | read-only | mandatory | Status of the current internal file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.1.20 | TablegenEquipMngSwInstallStatusTable | not-accessible | mandatory | This table shows the status of the current software version installation operation. |
| 1.3.6.1.4.1.2281.10.4.1.20.1 | RowgenEquipMngSwInstallStatusEntry | not-accessible | mandatory | Entry containing the info of software installation status. |
| 1.3.6.1.4.1.2281.10.4.1.20.1.1 | ColumngenEquipMngSwInstallStatusIndex | read-only | mandatory | The index of the table.. |
| 1.3.6.1.4.1.2281.10.4.1.20.1.2 | ColumngenEquipMngSwInstallStatusResult | read-only | mandatory | Status of the current installation operation. |
| 1.3.6.1.4.1.2281.10.4.1.20.1.3 | ColumngenEquipMngSwInstallPercentageDone | read-only | mandatory | An indication of the progress of the process of the current installation operation. |
| 1.3.6.1.4.1.2281.10.4.1.20.1.4 | ColumngenEquipMngSwInstallStatusResultStandBy | read-only | mandatory | Status of the current file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.1.20.1.5 | ColumngenEquipMngSwInstallPercentageDoneStandBy | read-only | mandatory | An indication of the progress of the process of the current installation operation. |
| 1.3.6.1.4.1.2281.10.4.1.21 | TablegenEquipMngSwOperationTable | not-accessible | mandatory | This table allows downloading and installing SW versions. |
| 1.3.6.1.4.1.2281.10.4.1.21.1 | RowgenEquipMngSwOperationEntry | not-accessible | mandatory | Entry containing the info of software management operation table. |
| 1.3.6.1.4.1.2281.10.4.1.21.1.1 | ColumngenEquipMngSwOperationIndex | read-only | mandatory | The index of the table.. |
| 1.3.6.1.4.1.2281.10.4.1.21.1.2 | ColumngenEquipMngSwOperationOperation | read-write | mandatory | The operation to be performed: download, install, update backup, swap boot section, abort installation timer. |
| 1.3.6.1.4.1.2281.10.4.1.21.1.3 | ColumngenEquipMngSwOperationTimedInstallation | read-write | mandatory | Whether to perform the installation after a configurable timer expires. |
| 1.3.6.1.4.1.2281.10.4.1.22 | TablegenEquipMngSwSlotRunningVersionTable | not-accessible | mandatory | This table shows the versions currently running in cards installed in the system. |
| 1.3.6.1.4.1.2281.10.4.1.22.1 | RowgenEquipMngSwSlotRunningVersionEntry | not-accessible | mandatory | This table entry shows the versions currently running in cards installed in the system. |
| 1.3.6.1.4.1.2281.10.4.1.22.1.1 | ColumngenEquipMngSwSlotRunningVersionSlotId | read-only | mandatory | The index of the table.. |
| 1.3.6.1.4.1.2281.10.4.1.22.1.2 | ColumngenEquipMngSwSlotRunningVersionCardType | read-only | mandatory | Type of card inserted in slot. |
| 1.3.6.1.4.1.2281.10.4.1.22.1.3 | ColumngenEquipMngSwSlotRunningVersionComponent | read-only | mandatory | Name of SW functional component. |
| 1.3.6.1.4.1.2281.10.4.1.22.1.4 | ColumngenEquipMngSwSlotRunningVersionActualVersion | read-only | mandatory | Version of running SW. |
| 1.3.6.1.4.1.2281.10.4.1.23 | TablegenEquipMngSwIDUVersionsStandByTable | not-accessible | mandatory | This table shows the software versions residing in the standby unit. |
| 1.3.6.1.4.1.2281.10.4.1.23.1 | RowgenEquipMngSwIDUVersionsStandByEntry | not-accessible | mandatory | This table entry shows the software versions residing in the standby unit. |
| 1.3.6.1.4.1.2281.10.4.1.23.1.1 | ColumngenEquipMngSwIDUVersionsStandByIndex | read-only | mandatory | mate rpm index. |
| 1.3.6.1.4.1.2281.10.4.1.23.1.2 | ColumngenEquipMngSwIDUVersionsStandByPackageName | read-only | mandatory | Name of the module which the software package belongs to. |
| 1.3.6.1.4.1.2281.10.4.1.23.1.3 | ColumngenEquipMngSwIDUVersionsStandByRunningVersion | read-only | mandatory | Version currently running. |
| 1.3.6.1.4.1.2281.10.4.1.23.1.4 | ColumngenEquipMngSwIDUVersionsStandByInstalledVersion | read-only | mandatory | Currently installed version; upon the appropriate reset this will become the running version. |
| 1.3.6.1.4.1.2281.10.4.1.23.1.5 | ColumngenEquipMngSwIDUVersionsStandByTargetDevice | read-only | mandatory | The HW board in which the SW module from the mate is running. |
| 1.3.6.1.4.1.2281.10.4.1.23.1.6 | ColumngenEquipMngSwIDUVersionsStandByDownloadedPackage | read-only | mandatory | Version that was downloaded from server upon installation, it will become the installed version. |
| 1.3.6.1.4.1.2281.10.4.1.23.1.7 | ColumngenEquipMngSwIDUVersionsStandByResetType | read-only | mandatory | Minimum level of reset required to update the software in the relevant module. |
| 1.3.6.1.4.1.2281.10.4.1.35 | ScalargenEquipMngSwWatchdogAdmin | read-write | mandatory | Enables/Disables the watchdog timer for the application. |
| 1.3.6.1.4.1.2281.10.4.2 | NodegenEquipMngCfg | |||
| 1.3.6.1.4.1.2281.10.4.2.1 | ScalargenEquipMngCfgBackupStatus | read-only | mandatory | This parameter shows the current state of the configuration backup files creation in the IDU. Possible values are: - ready(0) - inProgress(1) - success(2) - fa… |
| 1.3.6.1.4.1.2281.10.4.2.2 | ScalargenEquipMngCfgRestoreStatus | read-only | mandatory | This parameter shows the current state of configuration restoring from downloaded backup files. Possible values are: - ready(0) - inProgress(1) - success(2) - … |
| 1.3.6.1.4.1.2281.10.4.2.3 | ScalargenEquipMngCfgUploadStatus | read-only | mandatory | This parameter shows the current state of configuration backup files transfer from IDU to external FTP site. Possible values are: - ready(0) - inProgress(1) - … |
| 1.3.6.1.4.1.2281.10.4.2.4 | ScalargenEquipMngCfgDownloadStatus | read-only | mandatory | This parameter shows the current state of configuration backup files transfer from external FTP site to IDU. Possible values are: - ready(0) - inProgress(1) - … |
| 1.3.6.1.4.1.2281.10.4.2.5 | ScalargenEquipMngCfgCommand | read-write | mandatory | The command to be executed to backup/restore or upload/download configuration. If there is more then 1 slot in the NE, it is done for all the shelf. |
| 1.3.6.1.4.1.2281.10.4.2.6 | ScalargenEquipMngCfgEthernetSwitchStoreConfiguration | read-write | mandatory | This parameter writes the current configuration in the database. This command should be called after any change to the following sections: - Bridge configurati… |
| 1.3.6.1.4.1.2281.10.4.2.7 | ScalargenEquipMngCfgSetToDefaultKeepIp | read-write | mandatory | Set to Default configuration without changing the network parameters such as IP address, and subnet mask. |
| 1.3.6.1.4.1.2281.10.4.2.8 | ScalargenEquipMngCfgCliScriptFileName | read-write | mandatory | The CLI script file name to be downloaded to the NE. |
| 1.3.6.1.4.1.2281.10.4.2.10 | NodegenEquipMngCfgGeneric | |||
| 1.3.6.1.4.1.2281.10.4.2.10.1 | ScalargenEquipMngCfgBackupProgress | read-only | mandatory | An indication of the progress of the backup operation process. |
| 1.3.6.1.4.1.2281.10.4.2.10.2 | ScalargenEquipMngCfgTimeToInstallation | read-only | mandatory | A counter indicating the time left until installation begins. |
| 1.3.6.1.4.1.2281.10.4.2.11 | TablegenEquipMngCfgFileTransferTable | not-accessible | mandatory | This table allows configuring the details of the external server where configuration should be located. |
| 1.3.6.1.4.1.2281.10.4.2.11.1 | RowgenEquipMngCfgFileTransferEntry | not-accessible | mandatory | This table entry allows configuring the details of the external server where configuration should be located. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.1 | ColumngenEquipMngCfgFileTransferIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.2 | ColumngenEquipMngCfgFileTransferProtocol | read-write | mandatory | The protocol to use to transfer the files between the system and an external computer. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.3 | ColumngenEquipMngCfgFileTransferUserName | read-write | mandatory | User name for access to the configuration files location. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.4 | ColumngenEquipMngCfgFileTransferPassword | read-write | mandatory | Password for access to the configuration files location. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.5 | ColumngenEquipMngCfgFileTransferAddress | read-write | mandatory | IP address of the computer where configuration files are to be transferred to/from. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.6 | ColumngenEquipMngCfgFileTransferPath | read-write | mandatory | Location of the files in the external server. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.7 | ColumngenEquipMngCfgFileTransferFileName | read-write | mandatory | Name of the file in server. |
| 1.3.6.1.4.1.2281.10.4.2.11.1.8 | ColumngenEquipMngCfgFileTransferIpv6Address | read-write | mandatory | IPv6 Server's address where files will be transferred to/from. |
| 1.3.6.1.4.1.2281.10.4.2.12 | TablegenEquipMngCfgFileTransferStatusTable | not-accessible | mandatory | This table shows the status of the current configuration file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.2.12.1 | RowgenEquipMngCfgFileTransferStatusEntry | not-accessible | mandatory | This table entry shows the status of the current configuration file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.2.12.1.1 | ColumngenEquipMngCfgFileTransferStatusIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.4.2.12.1.2 | ColumngenEquipMngCfgFileTransferStatusPercentageDone | read-only | mandatory | An indication of the progress of the process of the current file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.2.12.1.3 | ColumngenEquipMngCfgFileTransferStatusResult | read-write | mandatory | Status of the current file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.2.13 | TablegenEquipMngCfgOperationTable | not-accessible | mandatory | This table allows creating, restoring, transferring and deleting configuration files. |
| 1.3.6.1.4.1.2281.10.4.2.13.1 | RowgenEquipMngCfgOperationEntry | not-accessible | mandatory | This table entry allows creating, restoring, transferring and deleting configuration files. |
| 1.3.6.1.4.1.2281.10.4.2.13.1.1 | ColumngenEquipMngCfgOperationIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.4.2.13.1.2 | ColumngenEquipMngCfgOperationOperation | read-write | mandatory | The operation to be performed: backup, restore, delete, import, export. |
| 1.3.6.1.4.1.2281.10.4.2.13.1.3 | ColumngenEquipMngCfgOperationFileNumber | read-write | mandatory | A number from 1 to 3 to identify different restoration files. |
| 1.3.6.1.4.1.2281.10.4.2.13.1.4 | ColumngenEquipMngCfgOperationTimedInstallation | read-write | mandatory | Whether to install immediately or following a countdown from a defined counter. |
| 1.3.6.1.4.1.2281.10.4.2.13.1.5 | ColumngenEquipMngCfgOperationTimer | read-write | mandatory | A timer which determines the time to installation. |
| 1.3.6.1.4.1.2281.10.4.2.13.1.6 | ColumngenEquipMngCfgOperationSlotNumber | read-only | mandatory | Slot number. |
| 1.3.6.1.4.1.2281.10.4.2.14 | TablegenEquipMngCfgConfigurationFilesTable | not-accessible | mandatory | This table shows the status of the current configuration management operation. |
| 1.3.6.1.4.1.2281.10.4.2.14.1 | RowgenEquipMngCfgConfigurationFilesEntry | not-accessible | mandatory | This table entry shows the status of the current configuration file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.1 | ColumngenEquipMngCfgConfigurationFilesIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.2 | ColumngenEquipMngCfgConfigurationFilesFileNumber | read-only | mandatory | A number from 1 to 3 to identify different restoration files. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.3 | ColumngenEquipMngCfgConfigurationFilesSystemType | read-only | mandatory | Type of product from which the backup file was created. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.4 | ColumngenEquipMngCfgConfigurationFilesSWVersion | read-only | mandatory | Software version of the system from which the backup file was created. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.5 | ColumngenEquipMngCfgConfigurationFilesTimeDate | read-only | mandatory | Time and date of creation of the file. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.6 | ColumngenEquipMngCfgConfigurationFilesSystemIP | read-only | mandatory | IP address of the unit from which the backup file was created. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.7 | ColumngenEquipMngCfgConfigurationFilesCardsConfigured | read-only | mandatory | Types of cards for which configuration values exist in the file; when restoring other card types will get default values. |
| 1.3.6.1.4.1.2281.10.4.2.14.1.8 | ColumngenEquipMngCfgConfigurationFilesSystemID | read-only | mandatory | System ID of the unit from which the backup file was created. |
| 1.3.6.1.4.1.2281.10.4.2.20 | ScalargenEquipMngCfgFileRestoreStatus | read-only | mandatory | Status of the operation of configuration restore from restore point. |
| 1.3.6.1.4.1.2281.10.4.2.21 | ScalargenEquipMngCfgFileTransferStatus | read-only | mandatory | Status of the operation of configuration restore from restore point. |
| 1.3.6.1.4.1.2281.10.4.3 | NodegenEquipMngFileTransfer | |||
| 1.3.6.1.4.1.2281.10.4.3.1 | ScalargenEquipMngFileTransferFileTypeOper | read-write | mandatory | Operation for the file type to be transferred between the IDU and the external server. The options with prefix 'download' are files to be transferred from the … |
| 1.3.6.1.4.1.2281.10.4.3.2 | ScalargenEquipMngFileTransferDownloadConfigStatus | read-only | mandatory | The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper |
| 1.3.6.1.4.1.2281.10.4.3.3 | ScalargenEquipMngFileTransferDownloadCertificateStatus | read-only | mandatory | The operation status of download configuration, which is performed using genEquipMngFileTransferFileTypeOper |
| 1.3.6.1.4.1.2281.10.4.3.4 | ScalargenEquipMngFileTransferDownloadWarningBannerStatus | read-only | mandatory | The operation status of download warning banner, which is performed using genEquipMngFileTransferFileTypeOper |
| 1.3.6.1.4.1.2281.10.4.3.5 | ScalargenEquipMngFileTransferDownloadCliScriptStatus | read-only | mandatory | TThe operation status of download cli script, which is performed using genEquipMngFileTransferFileTypeOper |
| 1.3.6.1.4.1.2281.10.4.3.6 | ScalargenEquipMngFileTransferUploadConfigStatus | read-only | mandatory | The operation status of upload configuration, which is performed using genEquipMngFileTransferFileTypeOper |
| 1.3.6.1.4.1.2281.10.4.3.7 | ScalargenEquipMngFileTransferUploadCSRStatus | read-only | mandatory | The operation status of upload CSR, which is performed using genEquipMngFileTransferFileTypeOper |
| 1.3.6.1.4.1.2281.10.4.3.8 | ScalargenEquipMngFileTransferUploadUnitInfoStatus | read-only | mandatory | The operation status of upload unit info, which is performed using genEquipMngFileTransferFileTypeOper |
| 1.3.6.1.4.1.2281.10.4.4 | NodegenEquipMngUnitInfo | |||
| 1.3.6.1.4.1.2281.10.4.4.1 | NodegenEquipMngUnitInfoGeneric | |||
| 1.3.6.1.4.1.2281.10.4.4.1.1 | ScalargenEquipMngUnitInfoOperation | read-write | mandatory | Allows creating and exporting the unit information file. |
| 1.3.6.1.4.1.2281.10.4.4.1.2 | ScalargenEquipMngUnitInfoProgress | read-only | mandatory | Progress in percentage of the operation of the unit info file creation. |
| 1.3.6.1.4.1.2281.10.4.4.1.3 | ScalargenEquipMngUnitInfoStatus | read-only | mandatory | Status of the operation of the unit info file creation. |
| 1.3.6.1.4.1.2281.10.4.4.2 | TablegenEquipMngUnitInfoFileTransferTable | not-accessible | mandatory | This table allows configuring the details of the external server which the unit info file will be expoted to. |
| 1.3.6.1.4.1.2281.10.4.4.2.1 | RowgenEquipMngUnitInfoFileTransferEntry | not-accessible | mandatory | This table entry allows configuring the details of the external server which the unit info file will be expoted to. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.1 | ColumngenEquipMngUnitInfoFileTransferIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.2 | ColumngenEquipMngUnitInfoFileTransferProtocol | read-write | mandatory | The protocol to use to transfer the files between the system and an external computer. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.3 | ColumngenEquipMngUnitInfoFileTransferUserName | read-write | mandatory | User name for access to the files location. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.4 | ColumngenEquipMngUnitInfoFileTransferPassword | read-write | mandatory | Password for access to the files location. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.5 | ColumngenEquipMngUnitInfoFileTransferAddress | read-write | mandatory | IP address of the computer where the files are to be transferred to/from. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.6 | ColumngenEquipMngUnitInfoFileTransferPath | read-write | mandatory | Desired location of the unit info file in external server. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.7 | ColumngenEquipMngUnitInfoFileTransferFileName | read-write | mandatory | Name of the file in server. |
| 1.3.6.1.4.1.2281.10.4.4.2.1.8 | ColumngenEquipMngUnitInfoFileTransferIpv6Address | read-write | mandatory | IPv6 Server's Address to which he file will be transferred. |
| 1.3.6.1.4.1.2281.10.4.4.3 | TablegenEquipMngUnitInfoFileTransferStatusTable | not-accessible | mandatory | This table shows the status of the current configuration file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.4.3.1 | RowgenEquipMngUnitInfoFileTransferStatusEntry | not-accessible | mandatory | This table entry shows the status of the current configuration file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.4.3.1.1 | ColumngenEquipMngUnitInfoFileTransferStatusIndex | read-only | mandatory | Index of the table. |
| 1.3.6.1.4.1.2281.10.4.4.3.1.2 | ColumngenEquipMngUnitInfoFileTransferStatusPercentageDone | read-only | mandatory | An indication of the progress of the process of the current file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.4.3.1.3 | ColumngenEquipMngUnitInfoFileTransferStatusResult | read-write | mandatory | Status of the current file transfer operation. |
| 1.3.6.1.4.1.2281.10.4.5 | NodegenEquipMngCli | |||
| 1.3.6.1.4.1.2281.10.4.5.1 | ScalargenEquipMngCliScriptOperation | read-write | mandatory | Allows importing, showing, deleting and executing CLI scripts. |
| 1.3.6.1.4.1.2281.10.4.5.2 | ScalargenEquipMngCliScriptOperationStatus | read-only | mandatory | Allows importing, showing, deleting and executing CLI scripts. |
| 1.3.6.1.4.1.2281.10.10 | NodegenEquipDiagAndMaintenance | |||
| 1.3.6.1.4.1.2281.10.10.1 | ScalargenEquipDiagAndMaintenanceRadioLoopbackTimeout | read-write | mandatory | Radio loopback timeout, in minutes. 0 means no timer. |
| 1.3.6.1.4.1.2281.10.10.2 | ScalargenEquipDiagAndMaintenanceLineLoopbackTimeout | read-write | mandatory | Line loopback timeout, in minutes. 0 means no timer. |
| 1.3.6.1.4.1.2281.10.10.3 | ScalargenEquipDiagAndMaintenanceSDHLoopbackTimeout | read-write | mandatory | STM-1/OC-3 line loopback timeout, in minutes. 0 means no timer. |
| 1.3.6.1.4.1.2281.10.11 | NodegenEquipSecurity | |||
| 1.3.6.1.4.1.2281.10.11.1 | NodegenEquipSecurityConfiguration | |||
| 1.3.6.1.4.1.2281.10.11.1.1 | ScalargenEquipSecurityCfgUploadPublicKeyStatus | read-only | mandatory | The upload status of the Public key. |
| 1.3.6.1.4.1.2281.10.11.1.2 | ScalargenEquipSecurityCfgDownloadSecurityStatus | read-only | mandatory | The download status of the digital certificate. |
| 1.3.6.1.4.1.2281.10.11.1.3 | ScalargenEquipSecurityCfgSecurityFileName | read-write | mandatory | The certificate file name to be downloaded. |
| 1.3.6.1.4.1.2281.10.11.1.4 | ScalargenEquipSecurityCfgSecurityFileType | read-write | mandatory | The digital certificate file type. |
| 1.3.6.1.4.1.2281.10.11.1.5 | ScalargenEquipSecurityCfgSecurityFileFormat | read-write | mandatory | The certificate file format. .pem - (Privacy Enhanced Mail) Base64 encoded DER certificate, enclosed between .der is a subset of Basic Encoding Rules (BER) pro… |
| 1.3.6.1.4.1.2281.10.11.1.6 | ScalargenEquipSecurityCfgSecurityWebCertificateAdmin | read-write | mandatory | The admin state of the certificate. |
| 1.3.6.1.4.1.2281.10.11.1.7 | ScalargenEquipSecurityCfgWebProtocol | read-write | mandatory | Use unsecure http or secure https. |
| 1.3.6.1.4.1.2281.10.11.1.8 | ScalargenEquipSecurityCfgTelnetAdmin | read-write | mandatory | Enable or disable the Telnet server on the NE. |
| 1.3.6.1.4.1.2281.10.11.1.9 | ScalargenEquipSecurityCfgAutoLogOutPeriod | read-write | mandatory | Auto logout period for CLI or web users, (1-60 seconds) |
| 1.3.6.1.4.1.2281.10.11.1.10 | NodegenEquipSecurityXFTP | |||
| 1.3.6.1.4.1.2281.10.11.1.10.1 | ScalargenEquipSecurityXFTPHostIP | read-write | mandatory | The FTP/SFTP host IP address. |
| 1.3.6.1.4.1.2281.10.11.1.10.2 | ScalargenEquipSecurityXFTPHostPath | read-write | mandatory | The FTP/SFTP host directory path. |
| 1.3.6.1.4.1.2281.10.11.1.10.3 | ScalargenEquipSecurityXFTPProtocol | read-write | mandatory | Either FTP or SFTP to be used. |
| 1.3.6.1.4.1.2281.10.11.1.10.4 | ScalargenEquipSecurityXFTPUserName | read-write | mandatory | FTP User name. |
| 1.3.6.1.4.1.2281.10.11.1.10.5 | ScalargenEquipSecurityXFTPPassword | read-write | mandatory | FTP User password. |
| 1.3.6.1.4.1.2281.10.11.1.11 | ScalargenEquipSecurityCfgPassFirstLoginChange | read-write | mandatory | Define whether user's first login will be required to change it password or not |
| 1.3.6.1.4.1.2281.10.11.1.12 | ScalargenEquipSecurityCfgCSRCreation | read-write | mandatory | This command create CSR file of the element. The file could be uploaded to external server by using the genEquipMngFileTransferFileTypeOper OID. The command sy… |
| 1.3.6.1.4.1.2281.10.11.1.13 | ScalargenEquipSecurityCfgWarningBannerFName | read-write | mandatory | The Warning Banner file name to be downloaded to the NE. |
| 1.3.6.1.4.1.2281.10.11.1.14 | NodegenEquipSecurityConfigurationRadius | |||
| 1.3.6.1.4.1.2281.10.11.1.14.1 | ScalargenEquipSecurityConfigurationRadiusAdmin | read-write | mandatory | this parameter configures the admin state of the RADIUS protocol; when enabled, all users will be logged in via RADIUS server |
| 1.3.6.1.4.1.2281.10.11.1.14.2 | ScalargenEquipSecurityConfigurationRadiusServerIP | read-write | mandatory | this parameter configures the IP address of the RADIUS server |
| 1.3.6.1.4.1.2281.10.11.1.14.3 | ScalargenEquipSecurityConfigurationRadiusSecret | read-write | mandatory | this parameter configures the common secret between the agent and the RADIUS server |
| 1.3.6.1.4.1.2281.10.11.1.14.4 | ScalargenEquipSecurityConfigurationRadiusPort | read-write | mandatory | this parameter configures the IP address of UDP port used for the RADIUS protocol |
| 1.3.6.1.4.1.2281.10.11.1.14.5 | ScalargenEquipSecurityConfigurationRadiusRetries | read-write | mandatory | this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable |
| 1.3.6.1.4.1.2281.10.11.1.14.6 | ScalargenEquipSecurityConfigurationRadiusTimeout | read-write | mandatory | this parameter configures the number of times the agent will retry to communicate with the RADIUS server before declaring the server to be unreacheable |
| 1.3.6.1.4.1.2281.10.11.2 | NodegenEquipSecurityUsersAndGroups | |||
| 1.3.6.1.4.1.2281.10.11.2.1 | TablegenEquipSecurityUsersTable | not-accessible | mandatory | User table. |
| 1.3.6.1.4.1.2281.10.11.2.1.1 | RowgenEquipSecurityUsersEntry | not-accessible | mandatory | User table. |
| 1.3.6.1.4.1.2281.10.11.2.1.1.1 | ColumngenEquipSecurityUsersName | read-write | mandatory | This value is the user name. |
| 1.3.6.1.4.1.2281.10.11.2.1.1.2 | ColumngenEquipSecurityUsersPasswd | read-write | mandatory | This value is the user's password. It is used only in the creation phase. To change the password, you need to use the genEquipSecurityUsersAndGroupsChangePassw… |
| 1.3.6.1.4.1.2281.10.11.2.1.1.3 | ColumngenEquipSecurityUsersPriviledge | read-write | mandatory | This value is the users privilege. |
| 1.3.6.1.4.1.2281.10.11.2.1.1.4 | ColumngenEquipSecurityUsersPasswdAging | read-write | mandatory | This value is the user's password aging time (in days). When response is 99999 the meaning is No Aging. |
| 1.3.6.1.4.1.2281.10.11.2.1.1.5 | ColumngenEquipSecurityUsersExprDate | read-write | mandatory | This value is the user's password expiration date. The value is presented in time_t format. When response is -1 the meaning is Never Expired. |
| 1.3.6.1.4.1.2281.10.11.2.1.1.6 | ColumngenEquipSecurityUsersLastLogin | read-only | mandatory | This value is the user last login date. Time in seconds since January 1, 1970 00:00 UTC. |
| 1.3.6.1.4.1.2281.10.11.2.1.1.30 | ColumngenEquipSecurityUsersRowStatus | read-write | mandatory | This value is the status of the entry. |
| 1.3.6.1.4.1.2281.10.11.2.2 | ScalargenEquipSecurityUsersAndGroupsChangePasswd | read-write | mandatory | This command changes the user password at the command line. It takes all arguments as the command. It cannot be done through the table since it needs to provid… |
| 1.3.6.1.4.1.2281.10.11.3 | NodegenEquipSecuritySNMP | |||
| 1.3.6.1.4.1.2281.10.11.3.1 | ScalargenEquipSecuritySNMPReadCommunity | read-write | mandatory | This is the SNMP Read community string |
| 1.3.6.1.4.1.2281.10.11.3.2 | ScalargenEquipSecuritySNMPWriteCommunity | read-write | mandatory | This is the SNMP Write community string |
| 1.3.6.1.4.1.2281.10.11.3.10 | NodegenEquipSecuritySNMPV3 | |||
| 1.3.6.1.4.1.2281.10.11.3.10.1 | TablegenEquipSecuritySNMPV3AuthTable | not-accessible | mandatory | Security General File Transfer Configuration Table. |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1 | RowgenEquipSecuritySNMPV3AuthEntry | not-accessible | mandatory | Security General File Transfer Configuration Table |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1.1 | ColumngenEquipSecuritySNMPV3AuthUserName | read-write | mandatory | This value is the V3 user name and the index of file v3 Authentication table. |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1.2 | ColumngenEquipSecuritySNMPV3AuthPassword | read-write | mandatory | This value is file V3 user authentication password. |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1.3 | ColumngenEquipSecuritySNMPV3AuthSecurityMode | read-write | mandatory | This is the user's security mode |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1.4 | ColumngenEquipSecuritySNMPV3AuthEncryptionMode | read-write | mandatory | This is the V3 encryption mode. |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1.5 | ColumngenEquipSecuritySNMPV3AuthAuthenticationAlgorithm | read-write | mandatory | This is the V3 authentication algorithm. |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1.6 | ColumngenEquipSecuritySNMPV3AuthAccessMode | read-write | mandatory | This is the V3 user access mode. |
| 1.3.6.1.4.1.2281.10.11.3.10.1.1.30 | ColumngenEquipSecuritySNMPV3AuthRowStatus | read-write | mandatory | This is the row status. |
| 1.3.6.1.4.1.2281.10.11.4 | NodegenEquipSecurityGen | |||
| 1.3.6.1.4.1.2281.10.11.4.1 | TablegenEquipSecurityGenFTConfigTable | not-accessible | mandatory | Security General File Transfer Configuration Table. |
| 1.3.6.1.4.1.2281.10.11.4.1.1 | RowgenEquipSecurityGenFTConfigEntry | not-accessible | mandatory | Security General File Transfer Configuration Table |
| 1.3.6.1.4.1.2281.10.11.4.1.1.1 | ColumngenEquipSecurityGenFTConfigIndex | read-write | mandatory | This value is the index of file transfer table. |
| 1.3.6.1.4.1.2281.10.11.4.1.1.2 | ColumngenEquipSecurityGenFTConfigProtocol | read-write | mandatory | This value is file transfer protocol. |
| 1.3.6.1.4.1.2281.10.11.4.1.1.3 | ColumngenEquipSecurityGenFTConfigUsername | read-write | mandatory | This value is the user's name |
| 1.3.6.1.4.1.2281.10.11.4.1.1.4 | ColumngenEquipSecurityGenFTConfigPassword | read-write | mandatory | This value is the users password. |
| 1.3.6.1.4.1.2281.10.11.4.1.1.5 | ColumngenEquipSecurityGenFTConfigAddress | read-write | mandatory | This value is the server IP. |
| 1.3.6.1.4.1.2281.10.11.4.1.1.6 | ColumngenEquipSecurityGenFTConfigFilePath | read-write | mandatory | This value is file path. |
| 1.3.6.1.4.1.2281.10.11.4.1.1.7 | ColumngenEquipSecurityGenFTConfigFileName | read-only | mandatory | This value is the file name. |
| 1.3.6.1.4.1.2281.10.11.4.1.1.8 | ColumngenEquipSecurityGenFTConfigIpV6Address | read-write | mandatory | IP address v6 of the server, where the file are to be transferred to/from. |
| 1.3.6.1.4.1.2281.10.11.4.2 | TablegenEquipSecurityGenFTStatusTable | not-accessible | mandatory | Security General File Transfer Status Table. |
| 1.3.6.1.4.1.2281.10.11.4.2.1 | RowgenEquipSecurityGenFTStatusEntry | not-accessible | mandatory | Security General File Transfer Status Table. |
| 1.3.6.1.4.1.2281.10.11.4.2.1.1 | ColumngenEquipSecurityGenFTStatusIndex | read-write | mandatory | This value is the index of file transfer status table. |
| 1.3.6.1.4.1.2281.10.11.4.2.1.2 | ColumngenEquipSecurityGenFTStatusStatus | read-only | mandatory | File transfer operation status. |
| 1.3.6.1.4.1.2281.10.11.4.2.1.3 | ColumngenEquipSecurityGenFTStatusProgress | read-only | mandatory | Process prcentage |
| 1.3.6.1.4.1.2281.10.11.4.11 | ScalargenEquipSecurityGenFTOperations | read-write | mandatory | File transfer operations |
| 1.3.6.1.4.1.2281.10.11.4.12 | ScalargenEquipSecurityGenImportExportAdmin | read-write | mandatory | Admin for import or export security settings |
| 1.3.6.1.4.1.2281.10.11.5 | NodegenEquipSecurityAccessControl | |||
| 1.3.6.1.4.1.2281.10.11.5.1 | TablegenEquipSecurityAccessControlProfileTable | not-accessible | mandatory | Security Access Control Profile Table. |
| 1.3.6.1.4.1.2281.10.11.5.1.1 | RowgenEquipSecurityAccessControlProfileEntry | not-accessible | mandatory | Security Access Control Profile Table Entry |
| 1.3.6.1.4.1.2281.10.11.5.1.1.1 | ColumngenEquipSecurityAccessControlProfileName | read-write | mandatory | User profile name. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.2 | ColumngenEquipSecurityAccessControlProfileChannel | read-write | mandatory | Permitted access channels. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.3 | ColumngenEquipSecurityAccessControlProfileUsed | read-only | mandatory | Indicate whether the profile in used |
| 1.3.6.1.4.1.2281.10.11.5.1.1.4 | ColumngenEquipSecurityAccessControlProfileSecurityWrite | read-write | mandatory | Security functional write access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.5 | ColumngenEquipSecurityAccessControlProfileSecurityRead | read-write | mandatory | Security functional read access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.6 | ColumngenEquipSecurityAccessControlProfileMngWrite | read-write | mandatory | Management functional write access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.7 | ColumngenEquipSecurityAccessControlProfileMngRead | read-write | mandatory | Management functional read access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.8 | ColumngenEquipSecurityAccessControlProfileRadioWrite | read-write | mandatory | Radio functional write access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.9 | ColumngenEquipSecurityAccessControlProfileRadioRead | read-write | mandatory | Radio functional read access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.10 | ColumngenEquipSecurityAccessControlProfileTDMWrite | read-write | mandatory | TDM functional write access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.11 | ColumngenEquipSecurityAccessControlProfileTDMRead | read-write | mandatory | TDM functional read access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.12 | ColumngenEquipSecurityAccessControlProfileEthWrite | read-write | mandatory | Ether functional write access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.13 | ColumngenEquipSecurityAccessControlProfileEthRead | read-write | mandatory | Ether functional read access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.14 | ColumngenEquipSecurityAccessControlProfileSyncWrite | read-write | mandatory | Sync functional write access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.15 | ColumngenEquipSecurityAccessControlProfileSyncRead | read-write | mandatory | Sync functional read access level. |
| 1.3.6.1.4.1.2281.10.11.5.1.1.30 | ColumngenEquipSecurityAccessControlProfileRowStatus | read-write | mandatory | Row Status for Profile table. |
| 1.3.6.1.4.1.2281.10.11.5.2 | TablegenEquipSecurityAccessControlUserTable | not-accessible | mandatory | Security Access Control User Table. |
| 1.3.6.1.4.1.2281.10.11.5.2.1 | RowgenEquipSecurityAccessControlUserEntry | not-accessible | mandatory | Security Access Control User Table Entry |
| 1.3.6.1.4.1.2281.10.11.5.2.1.1 | ColumngenEquipSecurityAccessControlUserName | read-write | mandatory | User name. |
| 1.3.6.1.4.1.2281.10.11.5.2.1.2 | ColumngenEquipSecurityAccessControlUserProfile | read-write | mandatory | User's profile name. |
| 1.3.6.1.4.1.2281.10.11.5.2.1.3 | ColumngenEquipSecurityAccessControlUserPassword | read-write | mandatory | User's password |
| 1.3.6.1.4.1.2281.10.11.5.2.1.4 | ColumngenEquipSecurityAccessControlUserExpired | read-write | mandatory | expired date of user account. |
| 1.3.6.1.4.1.2281.10.11.5.2.1.5 | ColumngenEquipSecurityAccessControlUserBlock | read-write | mandatory | Block user account. |
| 1.3.6.1.4.1.2281.10.11.5.2.1.6 | ColumngenEquipSecurityAccessControlUserLastLogout | read-write | mandatory | Current login indication. |
| 1.3.6.1.4.1.2281.10.11.5.2.1.7 | ColumngenEquipSecurityAccessControlUserLoggedIn | read-write | mandatory | Current login indication. |
| 1.3.6.1.4.1.2281.10.11.5.2.1.30 | ColumngenEquipSecurityAccessControlUserRowStatus | read-write | mandatory | Row Status for users table. |
| 1.3.6.1.4.1.2281.10.11.5.11 | ScalargenEquipSecurityAccessControlPassEnforceStrength | read-write | mandatory | Enforce strength password. |
| 1.3.6.1.4.1.2281.10.11.5.12 | ScalargenEquipSecurityAccessControlPassFirstLoginChange | read-write | mandatory | Password change for first login. |
| 1.3.6.1.4.1.2281.10.11.5.13 | ScalargenEquipSecurityAccessControlPassAging | read-write | mandatory | Password aging. |
| 1.3.6.1.4.1.2281.10.11.5.14 | ScalargenEquipSecurityAccessControlFailureLoginAttempt | read-write | mandatory | Failure login threshold blocking user account. |
| 1.3.6.1.4.1.2281.10.11.5.15 | ScalargenEquipSecurityAccessControlBlockFailureLoginPeriod | read-write | mandatory | Blocking period due to failure login. |
| 1.3.6.1.4.1.2281.10.11.5.16 | ScalargenEquipSecurityAccessControlBlockunusedAccount | read-write | mandatory | Period time for block unused account. |
| 1.3.6.1.4.1.2281.10.11.5.17 | ScalargenEquipSecurityAccessControlBlockRootRemote | read-write | mandatory | Root remote access. |
| 1.3.6.1.4.1.2281.10.11.6 | NodegenEquipSecurityProtocolsControl | |||
| 1.3.6.1.4.1.2281.10.11.6.1 | ScalargenEquipSecurityProtocolsControlAutoSessionTimeOut | read-write | mandatory | Logout session after incativity timeout. |
| 1.3.6.1.4.1.2281.10.11.6.2 | ScalargenEquipSecurityProtocolsControlSNMPAdmin | read-write | mandatory | SNMP Admin. |
| 1.3.6.1.4.1.2281.10.11.6.3 | ScalargenEquipSecurityProtocolsControlSNMPOperStatus | read-only | mandatory | SNMP Operational Status. |
| 1.3.6.1.4.1.2281.10.11.6.4 | ScalargenEquipSecurityProtocolsControlSNMPTrapVersion | read-write | mandatory | SNMP Trap version. |
| 1.3.6.1.4.1.2281.10.11.6.5 | ScalargenEquipSecurityProtocolsControlSNMPMIBVersion | read-only | mandatory | SNMP MIB version. |
| 1.3.6.1.4.1.2281.10.11.6.6 | ScalargenEquipSecurityProtocolsControlSNMPV1V2Blocked | read-write | mandatory | SNMP V1V2 is blocked. |
| 1.3.6.1.4.1.2281.10.11.6.7 | ScalargenEquipSecurityProtocolsControlHTTPAdmin | read-write | mandatory | HTTP Admin. |
| 1.3.6.1.4.1.2281.10.11.7 | NodegenEquipSecurityMonitorAndLogs | |||
| 1.3.6.1.4.1.2281.10.11.7.1 | TablegenEquipSecurityConfigLogUploadConfigTable | not-accessible | mandatory | Config Log Upload Configuration. |
| 1.3.6.1.4.1.2281.10.11.7.1.1 | RowgenEquipSecurityConfigLogUploadConfigEntry | not-accessible | mandatory | Config Log Upload Configuration Table Entry |
| 1.3.6.1.4.1.2281.10.11.7.1.1.1 | ColumngenEquipSecurityConfigLogUploadConfigIndex | read-only | mandatory | Config Log Upload Configuration index. has Fixed value of 1 |
| 1.3.6.1.4.1.2281.10.11.7.1.1.2 | ColumngenEquipSecurityConfigLogUploadConfigProtocol | read-write | mandatory | Config Log Upload Configuration Protocol. |
| 1.3.6.1.4.1.2281.10.11.7.1.1.3 | ColumngenEquipSecurityConfigLogUploadConfigUsername | read-write | mandatory | Config Log Upload Username |
| 1.3.6.1.4.1.2281.10.11.7.1.1.4 | ColumngenEquipSecurityConfigLogUploadConfigPassword | read-write | mandatory | Config Log Upload Configuration Password. |
| 1.3.6.1.4.1.2281.10.11.7.1.1.5 | ColumngenEquipSecurityConfigLogUploadConfigIpaddress | read-write | mandatory | Config Log Upload Configuration ip address (Ipv4). |
| 1.3.6.1.4.1.2281.10.11.7.1.1.6 | ColumngenEquipSecurityConfigLogUploadConfigPath | read-write | mandatory | Config Log Upload Configuration Path. |
| 1.3.6.1.4.1.2281.10.11.7.1.1.7 | ColumngenEquipSecurityConfigLogUploadConfigFilename | read-write | mandatory | Config Log Upload Configuration Filename. |
| 1.3.6.1.4.1.2281.10.11.7.1.1.8 | ColumngenEquipSecurityConfigLogUploadConfigIpV6Address | read-write | mandatory | Config Log Upload Configuration ip address (Ipv6). |
| 1.3.6.1.4.1.2281.10.11.7.2 | TablegenEquipSecurityConfigLogUploadStatusTable | not-accessible | mandatory | Config Log Upload Status. |
| 1.3.6.1.4.1.2281.10.11.7.2.1 | RowgenEquipSecurityConfigLogUploadStatusEntry | not-accessible | mandatory | Config Log Upload Status Table Entry |
| 1.3.6.1.4.1.2281.10.11.7.2.1.1 | ColumngenEquipSecurityConfigLogUploadStatusIndex | read-only | mandatory | Config Log Upload Status index. has Fixed value of 1 |
| 1.3.6.1.4.1.2281.10.11.7.2.1.2 | ColumngenEquipSecurityConfigLogUploadStatusStatus | read-write | mandatory | Config Log Upload Configuration Protocol. |
| 1.3.6.1.4.1.2281.10.11.7.2.1.3 | ColumngenEquipSecurityConfigLogUploadStatusPrcntg | read-only | mandatory | Progress status in percentage. |
| 1.3.6.1.4.1.2281.10.11.7.10 | ScalargenEquipSecurityConfigLogUpload | read-write | mandatory | Configuration Log Upload. |
| 1.3.6.1.4.1.2281.10.11.8 | NodegenEquipSecurityRadiusServer | |||
| 1.3.6.1.4.1.2281.10.11.8.1 | TablegenEquipSecurityRadiusServerConfigurationTable | not-accessible | mandatory | Radius configuration table. |
| 1.3.6.1.4.1.2281.10.11.8.1.1 | RowgenEquipSecurityRadiusServerConfigurationEntry | not-accessible | mandatory | Radius configuration table Entry |
| 1.3.6.1.4.1.2281.10.11.8.1.1.1 | ColumngenEquipSecurityAccessControlRadiusServerId | read-only | mandatory | Server id: 1 - primary, 2-secondary |
| 1.3.6.1.4.1.2281.10.11.8.1.1.2 | ColumngenEquipSecurityAccessControlRadiusServerIpV4Address | read-write | mandatory | The IP address of the RADIUS Server. |
| 1.3.6.1.4.1.2281.10.11.8.1.1.3 | ColumngenEquipSecurityAccessControlRadiusServerIpv6Address | read-write | mandatory | The IP address of the RADIUS Server |
| 1.3.6.1.4.1.2281.10.11.8.1.1.4 | ColumngenEquipSecurityAccessControlRadiusServerPort | read-write | mandatory | The port ID of the RADIUS protocol in the RADIUS Server. |
| 1.3.6.1.4.1.2281.10.11.8.1.1.5 | ColumngenEquipSecurityAccessControlRadiusServerRetries | read-write | mandatory | The number of times the agent will retry to communicate with the selected RADIUS server before declaring the server to be not reachable. |
| 1.3.6.1.4.1.2281.10.11.8.1.1.6 | ColumngenEquipSecurityAccessControlRadiusServerTimeout | read-write | mandatory | The timeout that the agent will wait in each communication with the selected RADIUS server before retrying if no response is received. |
| 1.3.6.1.4.1.2281.10.11.8.1.1.7 | ColumngenEquipSecurityAccessControlRadiusServerSharedSecret | read-write | mandatory | The shared secret of the Radius Server. |
| 1.3.6.1.4.1.2281.10.11.8.1.1.8 | ColumngenEquipSecurityAccessControlRadiusServerConnectivityStatus | read-only | mandatory | The connectivity status of the RADIUS server in the last login tried. |
| 1.3.6.1.4.1.2281.10.11.8.2 | TablegenEquipSecurityAccessControlRadiusUsersTable | not-accessible | mandatory | Radius privilege table. |
| 1.3.6.1.4.1.2281.10.11.8.2.1 | RowgenEquipSecurityAccessControlRadiusUsersEntry | not-accessible | mandatory | Radius privilege table Entry |
| 1.3.6.1.4.1.2281.10.11.8.2.1.1 | ColumngenEquipSecurityAccessControlRadiusUsersId | read-only | mandatory | User ID |
| 1.3.6.1.4.1.2281.10.11.8.2.1.2 | ColumngenEquipSecurityAccessControlRadiusUserInstances | read-only | mandatory | A number of the same connected users. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.3 | ColumngenEquipSecurityAccessControlRadiusUsersAccessChannels | read-only | mandatory | A bits stands for each access channel: serial-0, telnet-1, ssh-2, web-3 |
| 1.3.6.1.4.1.2281.10.11.8.2.1.4 | ColumngenEquipSecurityAccessControlRadiusUsersEthReadLevel | read-only | mandatory | The RADIUS permitted access for Ethernet Read Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.5 | ColumngenEquipSecurityAccessControlRadiusUsersEthWriteLevel | read-only | mandatory | The RADIUS permitted access for Ethernet Write Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.6 | ColumngenEquipSecurityAccessControlRadiusUsersMngReadLevel | read-only | mandatory | The RADIUS permitted access for MNG Read Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.7 | ColumngenEquipSecurityAccessControlRadiusUsersMngWriteLevel | read-only | mandatory | The RADIUS permitted access for MNG Write Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.8 | ColumngenEquipSecurityAccessControlRadiusUsersRadioReadLevel | read-only | mandatory | The RADIUS permitted access for Radio Read Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.9 | ColumngenEquipSecurityAccessControlRadiusUsersRadioWriteLevel | read-only | mandatory | The RADIUS permitted access for Radio Write Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.10 | ColumngenEquipSecurityAccessControlRadiusUsersSecurityReadLevel | read-only | mandatory | The RADIUS permitted access for Security Read Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.11 | ColumngenEquipSecurityAccessControlRadiusUsersSecurityWriteLevel | read-only | mandatory | The RADIUS permitted access for Security Write Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.12 | ColumngenEquipSecurityAccessControlRadiusUsersSyncReadLevel | read-only | mandatory | The RADIUS permitted access for Sync Read Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.13 | ColumngenEquipSecurityAccessControlRadiusUsersSyncWriteLevel | read-only | mandatory | The RADIUS permitted access for Sync Write Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.14 | ColumngenEquipSecurityAccessControlRadiusUsersTdmReadLevel | read-only | mandatory | The RADIUS permitted access for TDM Read Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.2.1.15 | ColumngenEquipSecurityAccessControlRadiusUsersTdmWriteLevel | read-only | mandatory | The RADIUS permitted access for TDM Write Level functional group. |
| 1.3.6.1.4.1.2281.10.11.8.10 | ScalargenEquipSecurityRadiusAdmin | read-write | mandatory | Control working withRadius Server. |
| 1.3.6.1.4.1.2281.10.11.9 | NodegenEquipSecurityCertificate | |||
| 1.3.6.1.4.1.2281.10.11.9.1 | ScalargenEquipSecurityCsrCertificateFileTransferSet | read-write | mandatory | CSR generate and Upload. |
| 1.3.6.1.4.1.2281.10.11.9.2 | ScalargenEquipSecurityCsrStatus | read-only | mandatory | Status of last geneate and upload. |
| 1.3.6.1.4.1.2281.10.11.9.3 | ScalargenEquipSecurityCsrCertificateGenerateAndUploadPercentage | read-only | mandatory | Percentage of last generate CSR and upload. |
| 1.3.6.1.4.1.2281.10.11.9.4 | ScalargenEquipSecurityCertificateInstallSet | read-write | mandatory | Certificate Install. |
| 1.3.6.1.4.1.2281.10.11.9.5 | ScalargenEquipSecurityCertificateDownloadStatus | read-only | mandatory | tatus of last certificate download. |
| 1.3.6.1.4.1.2281.10.11.9.6 | ScalargenEquipSecurityCertificateDownloadPercentage | read-only | mandatory | Percentage of certificate download operation. |
| 1.3.6.1.4.1.2281.10.11.9.10 | TablegenEquipSecurityCsrAttributesTable | not-accessible | mandatory | CSR Attributes Table. |
| 1.3.6.1.4.1.2281.10.11.9.10.1 | RowgenEquipSecurityCsrAttributesEntry | not-accessible | mandatory | CSR Attributes Table Entry |
| 1.3.6.1.4.1.2281.10.11.9.10.1.1 | ColumngenEquipSecurityCsrAttributesIndex | read-only | mandatory | Index to table, constant 1 |
| 1.3.6.1.4.1.2281.10.11.9.10.1.2 | ColumngenEquipSecurityCsrAttributesCountry | read-write | mandatory | The two-letter ISO abbreviation for your country (ISO3166-1) (example US). |
| 1.3.6.1.4.1.2281.10.11.9.10.1.3 | ColumngenEquipSecurityCsrAttributesLocality | read-write | mandatory | The city where your organization is legally located |
| 1.3.6.1.4.1.2281.10.11.9.10.1.4 | ColumngenEquipSecurityCsrAttributesState | read-write | mandatory | The state or province where your organization is legally located. Can not be abbreviated. |
| 1.3.6.1.4.1.2281.10.11.9.10.1.5 | ColumngenEquipSecurityCsrAttributesOrganization | read-write | mandatory | The exact legal name of your organization. Do not abbreviate your organization name. |
| 1.3.6.1.4.1.2281.10.11.9.10.1.6 | ColumngenEquipSecurityCsrAttributesOu | read-write | mandatory | Section of the organization. Example: Marketing. |
| 1.3.6.1.4.1.2281.10.11.9.10.1.7 | ColumngenEquipSecurityCsrAttributesCommonName | read-write | mandatory | The fully qualified domain name for your web server. This must be an exact match. |
| 1.3.6.1.4.1.2281.10.11.9.10.1.8 | ColumngenEquipSecurityCsrAttributesEmail | read-only | mandatory | An email address used to contact your organization. |
| 1.3.6.1.4.1.2281.10.11.9.10.1.9 | ColumngenEquipSecurityCsrAttributesFileFormat | read-only | mandatory | CSR file format. PEM or DER. |
| 1.3.6.1.4.1.2281.10.11.9.11 | TablegenEquipSecurityCsrUploadConfigTable | not-accessible | mandatory | CSR (Certificate Request) Upload Configuration Table. |
| 1.3.6.1.4.1.2281.10.11.9.11.1 | RowgenEquipSecurityCsrUploadConfigEntry | not-accessible | mandatory | CSR (Certificate Request) Upload Configuration Table Entry |
| 1.3.6.1.4.1.2281.10.11.9.11.1.1 | ColumngenEquipSecurityCsrUploadConfigIndex | read-only | mandatory | CSR upload Configuration index. has Fixed value of 1 |
| 1.3.6.1.4.1.2281.10.11.9.11.1.2 | ColumngenEquipSecurityCsrUploadConfigIpv4Address | read-write | mandatory | IPv4 address of the server, where the file are to be transferred to/from. |
| 1.3.6.1.4.1.2281.10.11.9.11.1.3 | ColumngenEquipSecurityCsrUploadConfigIpV6Address | read-write | mandatory | IPv6 address of the server, where the file are to be transferred to/from |
| 1.3.6.1.4.1.2281.10.11.9.11.1.4 | ColumngenEquipSecurityCsrUploadConfigTableUsername | read-write | mandatory | User name for accesssing files in the server (User credentials to access server). |
| 1.3.6.1.4.1.2281.10.11.9.11.1.5 | ColumngenEquipSecurityCsrUploadConfigPassword | read-write | mandatory | Password (User credentials to access server). |
| 1.3.6.1.4.1.2281.10.11.9.11.1.6 | ColumngenEquipSecurityCsrUploadConfigPath | read-write | mandatory | Location of file in the server (folder). |
| 1.3.6.1.4.1.2281.10.11.9.11.1.7 | ColumngenEquipSecurityCsrUploadConfigFilename | read-only | mandatory | Filename in the server, where the file are to be transferred to/from. |
| 1.3.6.1.4.1.2281.10.11.9.12 | TablegenEquipSecurityCertificateDownloadConfigTable | not-accessible | mandatory | CSR (Certificate Request) Download Configuration Table. |
| 1.3.6.1.4.1.2281.10.11.9.12.1 | RowgenEquipSecurityCertificateDownloadConfigEntry | not-accessible | mandatory | CSR (Certificate Request) Download Configuration Table Entry |
| 1.3.6.1.4.1.2281.10.11.9.12.1.1 | ColumngenEquipSecurityCertificateDownloadConfigIndex | read-only | mandatory | Certificate download configuration index. has Fixed value of 1 |
| 1.3.6.1.4.1.2281.10.11.9.12.1.2 | ColumngenEquipSecurityCertificateDownloadConfigIpv4Address | read-write | mandatory | IPv4 address of the server, where the file are to be transferred to/from. |
| 1.3.6.1.4.1.2281.10.11.9.12.1.3 | ColumngenEquipSecurityCertificateDownloadConfigIpV6Address | read-write | mandatory | IPv6 address of the server, where the file are to be transferred to/from |
| 1.3.6.1.4.1.2281.10.11.9.12.1.4 | ColumngenEquipSecurityCertificateDownloadConfigUsername | read-write | mandatory | User name for accesssing files in the server (User credentials to access server). |
| 1.3.6.1.4.1.2281.10.11.9.12.1.5 | ColumngenEquipSecurityCertificateDownloadConfigPassword | read-write | mandatory | Password (User credentials to access server). |
| 1.3.6.1.4.1.2281.10.11.9.12.1.6 | ColumngenEquipSecurityCertificateDownloadConfigPath | read-write | mandatory | Location of file in the server (folder). |
| 1.3.6.1.4.1.2281.10.11.9.12.1.7 | ColumngenEquipSecurityCertificateDownloadConfigFilename | read-only | mandatory | Filename in the server, where the file are to be transferred to/from. |
| 1.3.6.1.4.1.2281.10.11.10 | NodegenEquipSecurityTrafficCrypto | |||
| 1.3.6.1.4.1.2281.10.11.10.1 | ScalargenEquipSecurityFipsAdmin | read-write | mandatory | FIPS admin configuration parameter |
| 1.3.6.1.4.1.2281.10.11.10.2 | ScalargenEquipSecurityFipsStatus | read-only | mandatory | FIPS operational status. |
| 1.3.6.1.4.1.2281.10.11.10.10 | TablegenEquipTrafficCryptoConfigTable | not-accessible | mandatory | Traffic Crypto configuration table. |
| 1.3.6.1.4.1.2281.10.11.10.10.1 | RowgenEquipTrafficCryptoConfigEntry | not-accessible | mandatory | Traffic Crypto configuration table entry |
| 1.3.6.1.4.1.2281.10.11.10.10.1.1 | ColumngenEquipTrafficCryptoConfigId | read-only | mandatory | Traffic crypto Configuration Intreface ID |
| 1.3.6.1.4.1.2281.10.11.10.10.1.2 | ColumngenEquipTrafficCryptoConfigConfigAdmin | read-write | mandatory | Traffic Crypto Admin Mode. |
| 1.3.6.1.4.1.2281.10.11.10.10.1.3 | ColumngenEquipTrafficCryptoConfigMkey | read-write | mandatory | Traffic Crypto Master Key. |
| 1.3.6.1.4.1.2281.10.11.10.10.1.4 | ColumngenEquipTrafficCryptoConfigBackupMkey | read-write | mandatory | Traffic Crypto Backup Master Key |
| 1.3.6.1.4.1.2281.10.11.10.10.1.5 | ColumngenEquipTrafficCryptoConfigMkeyPeriod | read-write | mandatory | Master Key Expire Configuration. |
| 1.3.6.1.4.1.2281.10.11.10.10.1.6 | ColumngenEquipTrafficCryptoConfigRandKeyGen | read-write | mandatory | Random Key generation/clear indication. |
| 1.3.6.1.4.1.2281.10.11.10.10.1.7 | ColumngenEquipTrafficCryptoConfigSkeyPeriod | read-write | mandatory | Session Key Update Time Configuration. |
| 1.3.6.1.4.1.2281.10.11.10.11 | TablegenEquipTrafficCryptoStatusTable | not-accessible | mandatory | Traffic Crypto status table. |
| 1.3.6.1.4.1.2281.10.11.10.11.1 | RowgenEquipTrafficCryptoStatusEntry | not-accessible | mandatory | Traffic Crypto status table Entry |
| 1.3.6.1.4.1.2281.10.11.10.11.1.1 | ColumngenEquipTrafficCryptoStatusId | read-only | mandatory | Traffic Crypto Status Intreface ID |
| 1.3.6.1.4.1.2281.10.11.10.11.1.2 | ColumngenEquipTrafficCryptoStatusValid | read-only | mandatory | Crypto Interface Validation State. |
| 1.3.6.1.4.1.2281.10.11.10.11.1.3 | ColumngenEquipTrafficCryptoStatusMkeyTimeExpire | read-only | mandatory | Number of days Mkey to expire. |