MY-DVMRPINTEROPERABILITY-MIB
58 objects
This module defines my dvmrp mibs.
Imported Objects
| IF-MIB | InterfaceIndex |
| MY-SMI | myMgmt |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 experimental Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4881.1.1.10.2.29 | IdentitymyDvmrpMIB | This module defines my dvmrp mibs. | ||
| 1.3.6.1.4.1.4881.1.1.10.2.29.1 | NodemyDvmrpMIBObjects | |||
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.1 | NodemyDvmrpGroup | |||
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.1.1 | ScalarmyDvmrpRouteLimit | read-write | current | Number of DVMRP routes that can be advertised. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.1.2 | ScalarmyDvmrpRoutehogNotification | read-write | current | Number of routes allowed before a syslog message is triggered. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2 | TablemyDvmrpInterfaceTable | not-accessible | current | The (conceptual) table listing the interfaces on which Dvmrp is enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1 | RowmyDvmrpInterfaceEntry | not-accessible | current | An entry (conceptual row) representing an interface on which Dvmrp is enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.1 | ColumnmyDvmrpInterfaceIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.2 | ColumnmyDvmrpInterfaceDefaultInformation | read-write | current | originate means Other routes more specific than 0.0.0.0 may be advertised,only means No DVMRP routes other than 0.0.0.0 are advertised.Default means Disable th… |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.3 | ColumnmyDvmrpInterfaceUnicastRoutingStatus | read-write | current | Enable DVMRP unicast routing (to send and receive DVMRP routes). This feature is disabled by default. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.4 | ColumnmyDvmrpInterfaceRejectNonPrunersStatus | read-write | current | Prevent peering with nonpruning DVMRP neighbors. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.5 | ColumnmyDvmrpInterfaceAutoSummaryStatus | read-write | current | Disable or Enabled DVMRP autosummarization. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.6 | ColumnmyDvmrpInterfaceRtsRec | read-only | current | The number of received Dvmrp Routes. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.7 | ColumnmyDvmrpInterfacePoisonReverseRtsRec | read-only | current | The number of received poison-reverse Routes. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.8 | ColumnmyDvmrpInterfaceUniRtAdvertised | read-only | current | The number of Advertised unicast Routes. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.2.1.9 | ColumnmyDvmrpInterfaceDvmrpRtAdvertised | read-only | current | The number of Advertised dvmrp Routes. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.3 | TablemyDvmrpMetricOffsetTable | not-accessible | current | The (conceptual) table listing the MetricOffset on which Dvmrp is enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.3.1 | RowmyDvmrpMetricOffsetEntry | not-accessible | current | An entry (conceptual row) representing an MetricOffset on which Dvmrp is enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.3.1.1 | ColumnmyDvmrpMetricOffsetIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.3.1.2 | ColumnmyDvmrpMetricOffsetInOrOut | not-accessible | current | in means Specifies that the increment value is added to incoming DVMRP reports and is reported in mrinfo replies. out means Specifies that the increment value … |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.3.1.3 | ColumnmyDvmrpMetricOffsetIncrement | read-write | current | Value added to the metric of a DVMRP route advertised in a report message,the default increment value for incoming routes is 1,the range is 1 to 31; and the de… |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.4 | TablemyDvmrpSummaryTable | not-accessible | current | The (conceptual) table listing the Summary on which Dvmrp is enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.4.1 | RowmyDvmrpSummaryEntry | not-accessible | current | An entry (conceptual row) representing Summary enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.4.1.1 | ColumnmyDvmrpIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.4.1.2 | ColumnmyDvmrpSummaryAddress | not-accessible | current | Summary IP address that is advertised instead of the more specific route. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.4.1.3 | ColumnmyDvmrpSummaryMask | not-accessible | current | Mask on the summary IP address. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.4.1.4 | ColumnmyDvmrpSummaryMetric | read-write | current | Metric that is advertised with the summary address. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.4.1.5 | ColumnmyDvmrpSummaryStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.5 | TablemyDvmrpMetricTable | not-accessible | current | The (conceptual) table listing the interfaces on which Dvmrp is enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.5.1 | RowmyDvmrpMetricEntry | not-accessible | current | An entry (conceptual row) of myDvmrpMetricTable. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.5.1.1 | ColumnmyDvmrpMetricIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.5.1.2 | ColumnmyDvmrpMetric | not-accessible | current | Metric associated with a set of destinations for DVMRP reports. A value of 0 means that the route is not advertised. A value of 32 is equivalent to infinity (u… |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.5.1.3 | ColumnmyDvmrpMetricListAclName | read-create | current | The name of an access list,only the multicast destinations that match the access list are reported with the configured metric. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.5.1.4 | ColumnmyDvmrpMetricProtocolId | not-accessible | current | The number of Protocol Id,only routes learned by the specified routing protocol are advertised in DVMRP report messages. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.5.1.5 | ColumnmyDvmrpMetricStatus | read-create | current | The status of this entry. Creating the entry enables Dvmrp Metric; destroying the entry disables Dvmrp Metric. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6 | TablemyDvmrpRouteTable | not-accessible | current | The (conceptual) table listing the interfaces on which Dvmrp is enabled. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1 | RowmyDvmrpRouteEntry | not-accessible | current | An entry (conceptual row) of myDvmrpRouteTable. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.1 | ColumnmyDvmrpRouteIpAddress | not-accessible | current | Clears the longest matched route. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.2 | ColumnmyDvmrpRouteInterface | not-accessible | current | The interface number of Dvmrp Route. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.3 | ColumnmyDvmrpRouteDistance | read-only | current | For distance, enter the administrative distance to the destination. By default, the administrative distance for DVMRP routes is 0 and take precedence over unic… |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.4 | ColumnmyDvmrpRouteMetric | read-only | current | Metric associated with a set of destinations for DVMRP reports. A value of 0 means that the route is not advertised. A value of 32 is equivalent to infinity (u… |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.5 | ColumnmyDvmrpRouteUptime | read-only | current | How long (in hours, minutes, and seconds) that the route has been in the DVMRP routing table. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.6 | ColumnmyDvmrpRouteExpires | read-only | current | How long (in hours, minutes, and seconds) until the entry is removed from the DVMRP routing table. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.7 | ColumnmyDvmrpRouteNextHopAddress | read-only | current | The address of next hop. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.8 | ColumnmyDvmrpRouteNextHopInterface | read-only | current | The ifindex of next hop. |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.6.1.9 | ColumnmyDvmrpRouteStatus | read-write | current | The status of this entry. only be used to destroy the entry disables Dvmrp Route,the satuss of enabled will destroy all entry and disabled only destroy one ent… |
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.7 | NodemyDvmrpTraps | |||
| 1.3.6.1.4.1.4881.1.1.10.2.29.1.7.1 | NotificationmyDvmrpRouteInformation | current | A myDvmrpRouteInformation trap signifies the Number of routes is more than The limit of myDvmrpRoutehogNotification in one minute, then the trap should be gene… | |
| 1.3.6.1.4.1.4881.1.1.10.2.29.2 | NodemyDvmrpMIBConformance | |||
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.1 | NodemyDvmrpMIBCompliances | |||
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.1.1 | CompliancemyDvmrpMIBCompliance | current | The compliance statement for entities which implement the My DVMRP MIB | |
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.2 | NodemyDvmrpMIBGroups | |||
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.2.1 | GroupmyDvmrpBaseMIBGroup | current | A collection of general objects providing DVMRP managment. | |
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.2.2 | GroupmyDvmrpInterfaceMIBGroup | current | A collection of DVMRP interface managment. | |
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.2.3 | GroupmyDvmrpMetricOffsetMIBGroup | current | A collection of DVMRP metric offset objects. | |
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.2.4 | GroupmyDvmrpSummaryMIBGroup | current | A collection of DVMRP summary objects. | |
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.2.5 | GroupmyDvmrpMetricMIBGroup | current | A collection of DVMRP metric objects. | |
| 1.3.6.1.4.1.4881.1.1.10.2.29.2.2.6 | GroupmyDvmrpRouteMIBGroup | current | A collection of DVMRP route objects. |