MY-INTERFACE-MIB
58 objects
This module defines my interface mibs.
Imported Objects
| MY-SMI | myMgmt |
| MY-TC | ConfigStatus IfIndex MemberMap |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4881.1.1.10.2.10 | IdentitymyInterfaceMIB | This module defines my interface mibs. | ||
| 1.3.6.1.4.1.4881.1.1.10.2.10.1 | NodemyIfConfigMIBObjects | |||
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1 | TablemyIfTable | not-accessible | current | list of interface basic configuration objects. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1 | RowmyIfEntry | not-accessible | current | Entry contains interface basic configurations. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.1 | ColumnmyIfIndex | read-only | current | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.2 | ColumnmyIfPortType | read-only | current | Port type of this port, list as above. port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS, and system doesn't distinguish. port1000MBASEF… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.3 | ColumnmyIfFlowControlAdminStatus | read-write | current | Flow control of a port management status. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.4 | ColumnmyIfFlowControlOperStatus | read-only | current | Oper status: after the negotiation between two ports connetted the flow contrl status. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.5 | ColumnmyIfAdminSpeed | read-write | current | port speed settings. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.6 | ColumnmyIfAdminDuplex | read-write | current | port duplex settings. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.7 | ColumnmyIfOperSpeed | read-only | current | After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unkn… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.8 | ColumnmyIfOperDuplex | read-only | current | After two port have negotiated the duplex status, and this object is the working duplex status. while the port link status is down , then the speed status is u… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.9 | ColumnmyIfManageStatus | read-write | current | Management status of the interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.10 | ColumnmyIfIpBroadcast | read-write | current | Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0 |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.11 | ColumnmyIfLayer | read-write | current | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.12 | ColumnmyIfMode | read-write | current | This value is meaning for only physical port and aggreate port |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.13 | ColumnmyIfCounterClear | read-write | current | Setting its to any value but 0, will clear counters of this interface. Setting its value to 0 will cause no action of the agent. and when query will always ret… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.14 | ColumnmyIfEntryStatus | read-create | current | Status of this entry, set this object to valid will create a interface, and set its value to invalid will delete the interface of this entry. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.15 | ColumnmyIfMediumType | read-write | current | Port medium type of this port,fiber or copper. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.2 | TablemyIfIpTable | not-accessible | current | A list of interface ip configuration entries. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1 | RowmyIfIpEntry | not-accessible | current | An entry containing configuration information applicable to a Layer3 interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.1 | ColumnmyIfIpIfIndex | read-only | current | A unique value, for each Layer3 interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.2 | ColumnmyIfIpId | read-only | current | Type of interface ip address. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.3 | ColumnmyIfIp | read-only | current | Ip address of the interface myIfIndex refer to. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.4 | ColumnmyIfIpMask | read-write | current | Ip mask of the interface ip address. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.5 | ColumnmyIfIpEntryStatus | read-create | current | entry status of this entry. and the means in this enviraments can reffer to the text-convention definition of the RowStatus. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.3 | TablemyIfStatusTable | not-accessible | current | list of interface status. Status information include some error state and result of examining to the interface,etc. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1 | RowmyIfStatusEntry | not-accessible | current | Entry contains interface status information. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.1 | ColumnmyIfStatusIndex | read-only | current | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.2 | ColumnmyIfStatusLoopBackExamine | read-write | current | Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.3 | ColumnmyIfErrorStatus | read-only | current | Port's error status information |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.4 | ColumnmyIfLineDetect | read-only | current | When reading this object, system detects the quality of line connecting the port. Detect whether the line is broken or short circuit or not. The meaning of the… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.4 | ScalarmyGlobalIfDisableRecovery | read-write | current | Setting its to any value but 0, the interfaces which is shutted down by some error happened will recovery from disabled status . Setting its value to 0 will ca… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.5 | TablemyPortTypeChooseTable | not-accessible | current | Table of entrance to choose port type. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1 | RowmyPortTypeChooseEntry | not-accessible | current | Entrance to choose port type. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1.1 | ColumnmyPortTypeChooseIndex | read-only | current | The logic port number. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1.2 | ColumnmyPortTypeChooseType | read-only | current | The chosen port type. This object is used to choose one of the multiple physical ports of different types, when the same logical port is correspondent with the… |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.6 | TablemyIfMTUTable | not-accessible | current | Access table of MTU on interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1 | RowmyIfMTUEntry | not-accessible | current | Interfac MTU access. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1.1 | ColumnmyIfMTUIndex | read-only | current | Interface number |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1.2 | ColumnmyIfMTU | read-write | current | Interface MTU. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.7 | TablemyIfAvailableBWTable | not-accessible | current | Access table of Available Bandwidth on interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.7.1 | RowmyIfAvailableBWEntry | not-accessible | current | Interfac available bandwidth access. |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.7.1.1 | ColumnmyIfAvailableBWIfIndex | read-only | current | Interface number |
| 1.3.6.1.4.1.4881.1.1.10.2.10.1.7.1.2 | ColumnmyIfAvailableBWIfBW | read-only | current | Interface available bandwidth(bit). |
| 1.3.6.1.4.1.4881.1.1.10.2.10.2 | NodemyInterfaceTraps | |||
| 1.3.6.1.4.1.4881.1.1.10.2.10.2.1 | ScalarlineDetectStatus | accessible-for-notify | current | The type of storm of interface |
| 1.3.6.1.4.1.4881.1.1.10.2.10.2.2 | ScalarlineDetectPosition | accessible-for-notify | current | Location where the break or short circuit in the line happens (Distance from the switch port, in metre.) |
| 1.3.6.1.4.1.4881.1.1.10.2.10.2.3 | NotificationlineQualityDetect | current | The notification of discovering a break or short circuit in the line, or restoring the line to the normal state. | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.3 | NodemyInterfaceMIBConformance | |||
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.1 | NodemyInterfaceMIBCompliances | |||
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.1.1 | CompliancemyInterfaceMIBCompliance | current | The compliance statement for entities which implement the My Interface MIB | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.2 | NodemyInterfaceMIBGroups | |||
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.1 | GroupmyInterfaceMIBGroup | current | A collection of objects providing interface basic configure . | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.2 | GroupmyPortTypeChooseMibGroup | current | Information collection of choosing port type. | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.3 | GroupmyIfMTUMibGroup | current | Interface MTU information collection. | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.4 | GroupmyIfLineDetectGroup | current | Information collection of line quality detection. | |
| 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.5 | GroupmyIfAvailableBWMibGroup | current | Interface available bandwidth information collection. |