MIB Viewer

NAG-MIB

341 objects
MIB module for SNR-S5XXX series switches
Imported Objects
RFC-1215TRAP-TYPE
RFC1155-SMIenterprises
RFC1213-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 experimental Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.57206IdentitynagMIB module for SNR-S5XXX series switches
1.3.6.1.4.1.57206.7Nodesnr
1.3.6.1.4.1.57206.7.100Nodeos
1.3.6.1.4.1.57206.7.100.1NodepriSystem
1.3.6.1.4.1.57206.7.100.1.1ScalarsysResetUnitread-writecurrentsetfactory(2) warmReset(3) noReset(1) default the status is 1
1.3.6.1.4.1.57206.7.100.1.6ScalarsysWriteConfigread-writecurrentwrite(1)save the current configuration
1.3.6.1.4.1.57206.7.100.1.7TablesysPowerStateTablenot-accessiblecurrentthe power supply status for hot-swap PSU switch
1.3.6.1.4.1.57206.7.100.1.7.1RowsysPowerStateEntrynot-accessiblecurrentpower supply status
1.3.6.1.4.1.57206.7.100.1.7.1.1ColumnsysPowerSlotIndexnot-accessiblecurrentModule model No.
1.3.6.1.4.1.57206.7.100.1.7.1.2ColumnsysPowerStateread-onlycurrentif the power supply insert
1.3.6.1.4.1.57206.7.100.1.7.1.5ColumnsysPowerStatusread-onlycurrentPower Status
1.3.6.1.4.1.57206.7.100.1.10NodeswitchFileCopy
1.3.6.1.4.1.57206.7.100.1.10.1ScalarfileUserNameread-writecurrentftp/sftp/scp user name
1.3.6.1.4.1.57206.7.100.1.10.2ScalarfileUserPasswordread-writecurrentftp/sftp/scp user password
1.3.6.1.4.1.57206.7.100.1.10.3ScalarfileIPaddressread-writecurrentserver ip address
1.3.6.1.4.1.57206.7.100.1.10.4ScalarsourceFileCopyread-writecurrentSource file name or Copy from current system configuration .
1.3.6.1.4.1.57206.7.100.1.10.5ScalardestinationFileCopyread-writecurrentDestination file name or Copy to startup configuration.
1.3.6.1.4.1.57206.7.100.1.10.7ScalarfileCopyUseModeread-writecurrentftp(1): ftp server or client; tftp(2): tftp server or client; sftp(3): ftp server or client; scp(4): ftp server or client; local(5): local copy.
1.3.6.1.4.1.57206.7.100.1.10.8ScalarfileCopyread-writecurrentFile copy configurate.
1.3.6.1.4.1.57206.7.100.1.10.9ScalarfileCopyResultread-onlycurrentThe result of file copy:error(0):copy file failure;ok(1):copy file success; uploading(2):in process of upload file;downloading(3):in process of download file; …
1.3.6.1.4.1.57206.7.100.1.11NodeswitchInfo
1.3.6.1.4.1.57206.7.100.1.11.1ScalarswitchCPUTyperead-onlycurrentThe CPU type of switch
1.3.6.1.4.1.57206.7.100.1.11.2ScalarswitchCPUFiveSecondIdleread-onlycurrentLast 5 second CPU IDLE
1.3.6.1.4.1.57206.7.100.1.11.3ScalarswitchCPUThirtySecondIdleread-onlycurrentLast 30 second CPU IDLE
1.3.6.1.4.1.57206.7.100.1.11.4ScalarswitchCPUFiveMinuteIdleread-onlycurrentLast 5 minute CPU IDLE
1.3.6.1.4.1.57206.7.100.1.11.5ScalarswitchCPUIdleread-onlycurrentFrom running CPU IDLE
1.3.6.1.4.1.57206.7.100.1.11.6ScalarswitchMemorySizeread-onlycurrentmemory size
1.3.6.1.4.1.57206.7.100.1.11.7ScalarswitchMemoryBusyread-onlycurrentmemory usage rent
1.3.6.1.4.1.57206.7.100.1.11.8ScalarswitchFlashSizeread-onlycurrentThe flash capacity of switch.
1.3.6.1.4.1.57206.7.100.1.11.9ScalarswitchTemperatureread-onlycurrentThe Temperature of switch
1.3.6.1.4.1.57206.7.100.1.11.10ScalarswitchCpuUsageread-onlycurrentThe CPU usage of switch.
1.3.6.1.4.1.57206.7.100.1.11.11ScalarswitchMemoryUsageread-onlycurrentThe memory usage of switch.
1.3.6.1.4.1.57206.7.100.1.11.14ScalarswitchFlashSizeInBytesread-onlycurrentThe flash capacity of switch.
1.3.6.1.4.1.57206.7.100.1.11.15ScalarswitchFlashOccupiedSizeInBytesread-onlycurrentThe occupied flash size of switch.
1.3.6.1.4.1.57206.7.100.1.11.25ScalarswitchCPUOneMinuteIdleread-onlycurrentLast 1 minute CPU IDLE
1.3.6.1.4.1.57206.7.100.1.12TablesysFanTablenot-accessiblecurrentthe state of fan.
1.3.6.1.4.1.57206.7.100.1.12.1RowsysFanEntrynot-accessiblecurrentfan supply status
1.3.6.1.4.1.57206.7.100.1.12.1.1ColumnsysFanIndexnot-accessiblecurrentsystem fan entry index
1.3.6.1.4.1.57206.7.100.1.12.1.3ColumnsysFanStatusread-onlycurrentWhether the slot fan is error, normal or abnormal.
1.3.6.1.4.1.57206.7.100.1.12.1.10ColumnsysFanSpeedRpmread-onlycurrentRpm of fan
1.3.6.1.4.1.57206.7.100.1.13ScalarswitchBootImgPrimaryread-writecurrentSet or get filename of boot img for first time,and the length of filename is between 1 and 128.
1.3.6.1.4.1.57206.7.100.1.15ScalarswitchBootStartUpCfgread-onlycurrentGet filename of boot startup config ,and the length of filename is between 1 and 128.
1.3.6.1.4.1.57206.7.100.1.22NodesysAddUser
1.3.6.1.4.1.57206.7.100.1.22.1ScalarsysUserNameread-writecurrentset the username.
1.3.6.1.4.1.57206.7.100.1.22.2ScalarsysUserPasswordread-writecurrentset the password.
1.3.6.1.4.1.57206.7.100.1.22.3ScalarsysUserPasswordOptionread-writecurrentset a uncrypted(0) or crypted(7) password,default uncrypted(0).
1.3.6.1.4.1.57206.7.100.1.22.4ScalarsysUserNamePrivilegeread-writecurrentset username privilege. 1 - network-user ,10 - network-operator ,15 - network-admin(default).
1.3.6.1.4.1.57206.7.100.1.22.5ScalarsysAddUserStatusread-writecurrentadd user (1) user name or change password and priv. lvl.delete user (0)
1.3.6.1.4.1.57206.7.100.1.23NodepowerInfo
1.3.6.1.4.1.57206.7.100.1.23.2ScalarpriACPowerStatusread-onlycurrentget AC power status(1:Normal; 2:Abnormal).
1.3.6.1.4.1.57206.7.100.1.23.3ScalarpriBatteryStatusread-onlycurrentget Battery status
1.3.6.1.4.1.57206.7.100.1.23.4ScalarpriBatteryVoltageread-onlycurrentBattery Voltage x10
1.3.6.1.4.1.57206.7.100.1.23.5ScalarpriBatteryLevelread-onlycurrentBattery level percentage
1.3.6.1.4.1.57206.7.100.1.23.6ScalarpriSecPowerStatusread-onlycurrentget secondary power status
1.3.6.1.4.1.57206.7.100.1.200ScalarswitchModelread-onlycurrentSwitch model name
1.3.6.1.4.1.57206.7.100.1.201ScalarreloadAfterread-onlycurrentReload after
1.3.6.1.4.1.57206.7.100.3NodepriPorts
1.3.6.1.4.1.57206.7.100.3.2TablepriPortTablenot-accessiblecurrentA list of port entries.
1.3.6.1.4.1.57206.7.100.3.2.1RowpriPortEntrynot-accessiblecurrentA port entry containing port information, status, and control.
1.3.6.1.4.1.57206.7.100.3.2.1.1ColumnportIndexread-onlycurrentport No.
1.3.6.1.4.1.57206.7.100.3.2.1.2ColumnportNameread-onlycurrentName of the port. exp:financial.
1.3.6.1.4.1.57206.7.100.3.2.1.4ColumnslotNumnot-accessiblecurrentThis value is denoting the number of slot. For the static slot,the value is 1,while for the extended slot the value is real extended slot number.
1.3.6.1.4.1.57206.7.100.3.2.1.5ColumnportTyperead-onlycurrentType of expansion module in this port.
1.3.6.1.4.1.57206.7.100.3.2.1.7ColumnbandwidthControlStatusread-onlycurrentThe bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwid…
1.3.6.1.4.1.57206.7.100.3.2.1.8ColumnmaxBandwidthread-onlycurrentThe max bandwidth of the port.
1.3.6.1.4.1.57206.7.100.3.2.1.9ColumnreceiveBandwidthread-writecurrentThe recevice bandwidth of the port. Its unit is kbs. The command 'bandwidth control 50 both' in console mode equals setting both receiveBandwidth and transmitB…
1.3.6.1.4.1.57206.7.100.3.2.1.10ColumntransmitBandwidthread-writecurrentThe transmit bandwidth of the port. Its unit is kbs. Set 0 is no bandwidth.
1.3.6.1.4.1.57206.7.100.3.2.1.12Columnshutdownread-writecurrentClose or open to specify the port.
1.3.6.1.4.1.57206.7.100.3.2.1.14ColumnspeedDuplexread-writecurrentThe speed and duplex status of the port.
1.3.6.1.4.1.57206.7.100.3.2.1.15ColumnportModeread-writecurrentport mode: 1 is access,2 is trunk,3 is hybrid, 4 is private-vlan host, 5 is private-vlan promiscuous
1.3.6.1.4.1.57206.7.100.3.2.1.16Columnpvidread-writecurrentport of native vlan No.
1.3.6.1.4.1.57206.7.100.3.2.1.18ColumnvctActionread-writecurrentThis object indicates the VCT action of the port, the value 1 is permitted when SET this entry though you can GET 1(processing) and 0(succeed); The specified p…
1.3.6.1.4.1.57206.7.100.3.2.1.19ColumnvctLastStatusread-onlycurrentIndicates the last VCT status of the port.
1.3.6.1.4.1.57206.7.100.3.2.1.20ColumnportTrunkAllowedvlanread-writecurrenttrunk port allowed vlan list string
1.3.6.1.4.1.57206.7.100.3.2.1.21ColumnportHybridTaggedAllowedvlanread-writecurrenthybrid port tagged allowed vlan list string
1.3.6.1.4.1.57206.7.100.3.2.1.22ColumnportHybridUntaggedAllowedvlanread-writecurrenthybrid port untagged allowed vlan list string
1.3.6.1.4.1.57206.7.100.3.2.1.31ColumnportComboMediaTyperead-writecurrentThe media type of combo port
1.3.6.1.4.1.57206.7.100.3.3TablestormControlTablenot-accessiblecurrentstorm-contol table
1.3.6.1.4.1.57206.7.100.3.3.1RowstormControlEntrynot-accessiblecurrentstorm-control entry
1.3.6.1.4.1.57206.7.100.3.3.1.1ColumnstormControlIndexread-onlycurrentport index
1.3.6.1.4.1.57206.7.100.3.3.1.2ColumnstormControlTyperead-onlycurrentbroadcast(broadcast rate suppression),multicast(multicast rate suppression), unicast(unicast rate suppression),dlf(Destination Lookup Failure rate suppression)…
1.3.6.1.4.1.57206.7.100.3.3.1.3ColumnstormControlRateread-createcurrentthe suppress rate.the value range at <1-1488095> or <1-1000000> on different devices.
1.3.6.1.4.1.57206.7.100.3.3.1.4ColumnstormControlStatusread-createcurrentSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry
1.3.6.1.4.1.57206.7.100.3.3.1.10ColumnstormControlSuppressRateUnitread-createcurrentSuppress rate unit. Pps(1),kbps(2).
1.3.6.1.4.1.57206.7.100.3.4NodeloopbackDetection
1.3.6.1.4.1.57206.7.100.3.4.2NodeloopbackDetecIntervalTime
1.3.6.1.4.1.57206.7.100.3.4.2.1ScalarlpbackDetecExistIntervalread-writecurrentThis detection time interval is present when the loop exists, in seconds, the range of 1 to 300. The default value is 3.
1.3.6.1.4.1.57206.7.100.3.4.2.2ScalarlpbackDetecNoExistIntervalread-writecurrentThis detection time interval is present when the loop exists, in seconds, the range of 1 to 300. The default value is 3.
1.3.6.1.4.1.57206.7.100.3.4.3TableloopbackDetecCtrlTablenot-accessiblecurrentA table containing current configuration information for the function of loopback detection control.
1.3.6.1.4.1.57206.7.100.3.4.3.1RowloopbackDetecCtrlEntrynot-accessiblecurrentAn entry in the loopback detection control table.
1.3.6.1.4.1.57206.7.100.3.4.3.1.1ColumnlpbackDetecCtrlIndexread-onlycurrentAn unique value for each port.
1.3.6.1.4.1.57206.7.100.3.4.3.1.2ColumnlpbackDetecCtrlModeread-writecurrentIndicates the control type of the configuration of the loopback detection. The default value is 1.
1.3.6.1.4.1.57206.7.100.3.4.5TableloopbackDetecShowTablenot-accessiblecurrentShow the config and state of loopback detection for the specified port.
1.3.6.1.4.1.57206.7.100.3.4.5.1RowloopbackDetecShowEntrynot-accessiblecurrentAn entry in the loopbackDetecShowTable.
1.3.6.1.4.1.57206.7.100.3.4.5.1.1ColumnlpbackDetecShowPortIndexnot-accessiblecurrentAn unique value for each port.
1.3.6.1.4.1.57206.7.100.3.4.5.1.2ColumnlpbackDetecShowInformationread-onlycurrentThe value display the configuration and state of loopback detection for the specified port.
1.3.6.1.4.1.57206.7.100.3.4.20ScalarloopbackDetecBlockCtrlRecoveryread-writecurrentSet loopback-detection block control recovery timeout interval. The default value is 0. But when the value is 0, does not restore state.
1.3.6.1.4.1.57206.7.100.3.4.21TableloopbackDetectEnableTablenot-accessiblecurrentLoopback detection enable ports table.
1.3.6.1.4.1.57206.7.100.3.4.21.1RowloopbackDetectEnableEntrynot-accessiblecurrentAn entry in the loopbackDetectEnableTable.
1.3.6.1.4.1.57206.7.100.3.4.21.1.1ColumnloopbackDetectEnableIndexread-onlycurrentAn unique value for each port.
1.3.6.1.4.1.57206.7.100.3.4.21.1.2ColumnloopbackDetectEnablePortread-writecurrentIndicates the status of the loopback detection per port. The default value is 0.
1.3.6.1.4.1.57206.7.100.3.15TableportClearCountTablenot-accessiblecurrentClear port count table
1.3.6.1.4.1.57206.7.100.3.15.1RowportClearCountEntrynot-accessiblecurrentClear port count entry
1.3.6.1.4.1.57206.7.100.3.15.1.1ColumnportClearCountAllread-writecurrentclear counters all
1.3.6.1.4.1.57206.7.100.3.15.1.2ColumnportClearCountPortEthread-writecurrentclear counters port ethernet,for example: ge1
1.3.6.1.4.1.57206.7.100.3.20TablestormControlActionTablenot-accessiblecurrentstorm-contol table
1.3.6.1.4.1.57206.7.100.3.20.1RowstormControlActionEntrynot-accessiblecurrentA port entry containing storm control action status information
1.3.6.1.4.1.57206.7.100.3.20.1.1ColumnstormControlActionIndexread-onlycurrentport index.
1.3.6.1.4.1.57206.7.100.3.20.1.2ColumnstormControlActionTyperead-writecurrentType of action.Errdisable(1),log(2).
1.3.6.1.4.1.57206.7.100.3.30ScalarerrdisableTimeoutEnableread-writecurrentEnable/disable errdisable timeout. The default value is 1.
1.3.6.1.4.1.57206.7.100.3.31ScalarerrdisableTimeoutIntervalread-writecurrentSet errdisable timeout interval. The default value is 60.
1.3.6.1.4.1.57206.7.100.8NodepriIgmpSnoopingMib
1.3.6.1.4.1.57206.7.100.8.3TablepriIgmpSnoopingBindTablenot-accessiblecurrentIgmpSnoing bind configuration.
1.3.6.1.4.1.57206.7.100.8.3.1RowpriIgmpSnoopingBindEntrynot-accessiblecurrentIgmpSnooping bind configuration.
1.3.6.1.4.1.57206.7.100.8.3.1.1ColumnpriIgmpSnoopingVlanIDnot-accessiblecurrentThis value is vlan's ID.
1.3.6.1.4.1.57206.7.100.8.3.1.2ColumnpriIgmpSnoopingGroupAddressnot-accessiblecurrentThis value is group's ip address.
1.3.6.1.4.1.57206.7.100.8.3.1.3ColumnpriIgmpSnoopingPortBitmapread-onlycurrentPort's bitmap.
1.3.6.1.4.1.57206.7.100.10Nodeprisecurity
1.3.6.1.4.1.57206.7.100.10.1Nodeacl
1.3.6.1.4.1.57206.7.100.10.1.3NodeaclConfig
1.3.6.1.4.1.57206.7.100.10.1.3.1TablenumAclGroupTablenot-accessiblecurrentthis table is used for building a num-acl list.
1.3.6.1.4.1.57206.7.100.10.1.3.1.1RownumAclGroupEntrynot-accessiblecurrentnumAclGroup Table's Entry
1.3.6.1.4.1.57206.7.100.10.1.3.1.1.1ColumnnumAclGroupAclIndexread-onlycurrentthe index of number acl,ip standard <1-99>,ip extern <100-199>, ip standart expanded range <1300-1399>,ip extern expanded range <2000-2699>, mac-ip extern <310…
1.3.6.1.4.1.57206.7.100.10.1.3.1.1.4ColumnnumAclGroupStatusread-createcurrentthe status of number acl.
1.3.6.1.4.1.57206.7.100.10.1.3.1.1.10ColumnnumAclRemarkread-createcurrentAcl remark.
1.3.6.1.4.1.57206.7.100.10.1.3.3TableipStandardAclTablenot-accessiblecurrentconfig ip Standard Acl
1.3.6.1.4.1.57206.7.100.10.1.3.3.1RowipStandardAclEntrynot-accessiblecurrentip standard Table's Entry
1.3.6.1.4.1.57206.7.100.10.1.3.3.1.1ColumnipStandardIndexread-onlycurrentThe index of ip-standard-acl group.
1.3.6.1.4.1.57206.7.100.10.1.3.3.1.2ColumnipStandardSubIndexread-onlycurrentThe index of ip-standard-acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.3.1.4ColumnipStandardActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.3.1.5ColumnipStandardSrcIpread-createcurrentSource IP-address of basic acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.3.1.6ColumnipStandardSrcIpWildread-createcurrentSource IP-address wild of basic acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.3.1.7ColumnipStandardStatusread-createcurrentstatus of the ipStandardAclTable.
1.3.6.1.4.1.57206.7.100.10.1.3.4TableipExternAclTablenot-accessiblecurrentip extern Acl Table
1.3.6.1.4.1.57206.7.100.10.1.3.4.1RowipExternAclEntrynot-accessiblecurrentip extern Table's Entry
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.1ColumnipExternIndexread-onlycurrentThe index of ip-Extern-acl group .
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.2ColumnipExternSubIndexread-onlycurrentThe index of ip-Extern-acl rule .
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.4ColumnipExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.5ColumnipExternProtocolread-createcurrentThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 65535 matches every IP packet.…
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.6ColumnipExternSrcIpread-createcurrentSource IP-address of advanced acl rule,for example 10.1.1.0 .
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.7ColumnipExternSrcIpWildread-createcurrentSource IP-address wild of advanced acl rule,for example 0.0.0.255 .
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.8ColumnipExternDstIpread-createcurrentDestination IP-address of advanced acl rule,for example 10.1.1.0 .
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.9ColumnipExternDstIpWildread-createcurrentDestination IP-address wild of advanced acl rule,for example 0.0.0.255 .
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.12ColumnipExternSrcPort1read-createcurrentThe source port number of the TCP or UDP protocol.
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.15ColumnipExternDstPort1read-createcurrentThe destination port number of the TCP or UDP protocol.
1.3.6.1.4.1.57206.7.100.10.1.3.4.1.17ColumnipExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.57206.7.100.10.1.3.6TablemacExternAclTablenot-accessiblecurrentmac extern Acl Table
1.3.6.1.4.1.57206.7.100.10.1.3.6.1RowmacExternAclEntrynot-accessiblecurrentmac extern Table's Entry
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.1ColumnmacExternIndexread-onlycurrentThe index of Mac-Extern-acl group.
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.2ColumnmacExternSubIndexread-onlycurrentThe index of Mac-Extern-acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.4ColumnmacExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.5ColumnmacExternSrcMacread-createcurrentSource Mac-address of advanced acl rule,for example :aaaa.aaaa.aaaa.
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.6ColumnmacExternSrcMacWildread-createcurrentSource Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.7ColumnmacExternDstMacread-createcurrentDestination Mac-address of advanced acl rule,for example :aaaa.aaaa.aaaa.
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.8ColumnmacExternDstMacWildread-createcurrentDestination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.10ColumnmacExternEtherTyperead-createcurrentValue of the ethertype
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.12ColumnmacExternCosread-createcurrentvalue of the cos
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.14ColumnmacExternVlanIdread-createcurrentvlan id
1.3.6.1.4.1.57206.7.100.10.1.3.6.1.16ColumnmacExternStatusread-createcurrentnow state of the access-list.
1.3.6.1.4.1.57206.7.100.10.1.3.9TablemacIpExternAclTablenot-accessiblecurrentmac-ip extern Acl Table
1.3.6.1.4.1.57206.7.100.10.1.3.9.1RowmacIpExternAclEntrynot-accessiblecurrentmac-ip extern Table's Entry
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.1ColumnmacIpExternIndexread-onlycurrentThe index of macIp-Extern-acl group .
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.2ColumnmacIpExternSubIndexread-onlycurrentThe index of macIp-Extern-acl rule .
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.4ColumnmacIpExternActread-createcurrentThe action of acl rule.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.5ColumnmacIpExternProtocolread-createcurrentThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 65535 matches every IP packet.…
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.6ColumnmacIpExternSrcMacread-createcurrentSource Mac-address of advanced acl rule, for example: aa:aa:aa:aa:aa:aa.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.7ColumnmacIpExternSrcMacWildread-createcurrentSource Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.8ColumnmacIpExternDstMacread-createcurrentDestination Mac-address of advanced acl rule,for example :aa:aa:aa:aa:aa:aa.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.9ColumnmacIpExternDstMacWildread-createcurrentDestination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.10ColumnmacIpExternSrcIpread-createcurrentSource IP-address of advanced acl rule,for example 10.1.1.0 .
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.11ColumnmacIpExternSrcIpWildread-createcurrentSource IP-address wild of advanced acl rule,for example 0.0.0.255 .
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.12ColumnmacIpExternDstIpread-createcurrentDestination IP-address of advanced acl rule,for example 10.1.1.0 .
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.13ColumnmacIpExternDstIpWildread-createcurrentDestination IP-address wild of advanced acl rule,for example 0.0.0.255 .
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.16ColumnmacIpExternSrcPort1read-createcurrentThe source port number of the TCP or UDP protocol.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.19ColumnmacIpExternDstPort1read-createcurrentThe destination port number of the TCP or UDP protocol.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.21ColumnmacIpExternPrecedenceread-createcurrentThe precedence of macIp-Extern-acl .
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.23ColumnmacIpExternStatusread-createcurrentstate of the access-list.
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.24ColumnmacIpExternVlanIdread-createcurrentThe vlan Id
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.40ColumnmacIpExternDscpread-createcurrentDscp
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.41ColumnmacIpExternCosread-createcurrentCos
1.3.6.1.4.1.57206.7.100.10.1.3.9.1.50ColumnmacIpExternEtherTyperead-createcurrentValue of the ethertype
1.3.6.1.4.1.57206.7.100.10.1.4NodeaclAttach
1.3.6.1.4.1.57206.7.100.10.1.4.1TableaclActiveTablenot-accessiblecurrentbind Acl in port or vlan.
1.3.6.1.4.1.57206.7.100.10.1.4.1.1RowaclActiveEntrynot-accessiblecurrentEntry for aclActiveTable
1.3.6.1.4.1.57206.7.100.10.1.4.1.1.1ColumnaclActiveBindTyperead-onlycurrentpoint out the type of position of the bind-acl.
1.3.6.1.4.1.57206.7.100.10.1.4.1.1.2ColumnaclActiveIndexread-onlycurrentThe value of port id or vlan id .
1.3.6.1.4.1.57206.7.100.10.1.4.1.1.3ColumnaclActiveTyperead-onlycurrentthe type of acl.
1.3.6.1.4.1.57206.7.100.10.1.4.1.1.4ColumnaclActiveDirectionread-onlycurrentthe direction of a binding acl.
1.3.6.1.4.1.57206.7.100.10.1.4.1.1.5ColumnaclActiveAclIndexread-createcurrentthe value of acl index,you have configured in aclNumAccessGroupTable
1.3.6.1.4.1.57206.7.100.10.1.4.1.1.7ColumnaclActiveStatusread-createcurrentaccess or delete the bind-acl.
1.3.6.1.4.1.57206.7.100.10.4Nodeam
1.3.6.1.4.1.57206.7.100.10.4.1ScalaramGlobalEnableread-writecurrentGlobal Enable or disable the Access Management.
1.3.6.1.4.1.57206.7.100.10.4.2TableamPortInfoTablenot-accessiblecurrentAccess Management information list of port.
1.3.6.1.4.1.57206.7.100.10.4.2.1RowamPortInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.57206.7.100.10.4.2.1.1ColumnamPortIndexnot-accessiblecurrentport index
1.3.6.1.4.1.57206.7.100.10.4.2.1.2ColumnamPortEnableread-writecurrentEnable or disable the Access Management on the port.
1.3.6.1.4.1.57206.7.100.10.4.2.1.3ColumnamPortForwardingTyperead-writecurrentAccess Management forwarding type.
1.3.6.1.4.1.57206.7.100.10.4.2.1.4ColumnamPortIpread-onlycurrentIP address of Access Management.
1.3.6.1.4.1.57206.7.100.10.4.2.1.5ColumnamPortMacread-writecurrentMac address of Access Management.
1.3.6.1.4.1.57206.7.100.10.4.2.1.6ColumnamPortCountread-writecurrentSeriate IP address number.
1.3.6.1.4.1.57206.7.100.10.4.2.1.7ColumnamPortStatusread-writecurrent
1.3.6.1.4.1.57206.7.100.10.4.3TableamPortStateTablenot-accessiblecurrentAccess Management information list of port am..
1.3.6.1.4.1.57206.7.100.10.4.3.1RowamPortStateEntrynot-accessiblecurrententry for port am information.
1.3.6.1.4.1.57206.7.100.10.4.3.1.1ColumnamIfIndexread-onlycurrentinterface NO.
1.3.6.1.4.1.57206.7.100.10.4.3.1.2ColumnamIfNameread-onlycurrentinterface name.
1.3.6.1.4.1.57206.7.100.10.4.3.1.3ColumnamIfStateread-writecurrent1:Enable;0:Disable
1.3.6.1.4.1.57206.7.100.13Nodepridhcp
1.3.6.1.4.1.57206.7.100.13.3NodedhcpSnooping
1.3.6.1.4.1.57206.7.100.13.3.1ScalardhcpSnoopingEnableread-writecurrentEnable the dhcp snooping function.
1.3.6.1.4.1.57206.7.100.13.3.2ScalardhcpSnoopingBindingEnalberead-writecurrentEnable the dhcp snooping binding function.
1.3.6.1.4.1.57206.7.100.13.3.3ScalardhcpSnoopingVlanEnableread-writecurrentEnable the dhcp snooping on vlan list string, the vlan list string is input like as '1-2'. If the next time input the string '3-5',then the final vlan list is …
1.3.6.1.4.1.57206.7.100.13.3.4ScalardhcpSnoopingInformationEnalberead-writecurrentEnable the dhcp snooping information function.
1.3.6.1.4.1.57206.7.100.13.3.11ScalardhcpSnoopingInformationOptionAllowUntrustedread-writecurrentIf set(0), the dhcp packets with option82 are discarded, if set (1), the dhcp packets with option82 are permitted, and the content of option82 is not changed, …
1.3.6.1.4.1.57206.7.100.13.3.12ScalardhcpSnoopingOptionSelfDefinedSubscriberIDFormatread-writecurrentIf set(1), then use ASCII format to generate sub-scriber ID, set(0), use hex format to generate sub-scriber ID, the default value is set(1).
1.3.6.1.4.1.57206.7.100.13.3.17TabledhcpSnoopingPortConfigTablenot-accessiblecurrentAfter enable the dhcp snooping function, the administrator can configure the port information.
1.3.6.1.4.1.57206.7.100.13.3.17.1RowdhcpSnoopingPortConfigEntrynot-accessiblecurrentA conceptual row of dhcpSnoopingPortConfigTable.
1.3.6.1.4.1.57206.7.100.13.3.17.1.1ColumndhcpSnoopingPortIndexnot-accessiblecurrentConfigure the dhcp snooping function on the specified port.
1.3.6.1.4.1.57206.7.100.13.3.17.1.2ColumndhcpSnoopingUserControlMaxNumread-writecurrentConfigure the maximum of the binding users on a port, the range of binding users number is 0-254,the default number is 254.
1.3.6.1.4.1.57206.7.100.13.3.17.1.3ColumndhcpSnoopingUserControlread-writecurrentIf set(0), not enable the user control function on a specified port, if set(1), enable the user control function on a specified port, the default value is set(…
1.3.6.1.4.1.57206.7.100.13.3.17.1.4ColumndhcpSnoopingTrustread-writecurrentConfigure trust function on a port or vlan list string.If input the string 'all', then trust all the vlan. If input the string '1-2', then only trust the DHCP …
1.3.6.1.4.1.57206.7.100.20Nodedcscm
1.3.6.1.4.1.57206.7.100.20.2TabledcscmdcAclTablenot-accessiblecurrentdcscm dst control multicast
1.3.6.1.4.1.57206.7.100.20.2.1RowdcscmdcAclEntrynot-accessiblecurrentdcscm dst control multicast entry
1.3.6.1.4.1.57206.7.100.20.2.1.1ColumndcscmdcAclNumberread-createcurrentAcl number of Dcscm destination control multicast,the range is 6000-7999.
1.3.6.1.4.1.57206.7.100.20.2.1.2ColumndcscmdcAclSubNumberread-createcurrentAcl sub number of Dcscm destination control multicast,the range is <1-2147483645>.
1.3.6.1.4.1.57206.7.100.20.2.1.5ColumndcscmdcAclDestinationIpread-createcurrentDestination IP-address of multicast destination control acl rule.
1.3.6.1.4.1.57206.7.100.20.2.1.6ColumndcscmdcAclDestinationMaskread-createcurrentDestination Mask of acl entry. the destination mask should meet the request of muticast group address.
1.3.6.1.4.1.57206.7.100.20.2.1.7ColumndcscmdcAclPermitOrDenyread-createcurrentacl entry permit or deny ; 0:deny; 1:permit; 2:del this acl entry
1.3.6.1.4.1.57206.7.100.20.5TabledcscmdcPortbindingTablenot-accessiblecurrentdcscm destination control multicast, Acl is binded to Port
1.3.6.1.4.1.57206.7.100.20.5.1RowdcscmdcPortbindingEntrynot-accessiblecurrentThe index of this table is PortName
1.3.6.1.4.1.57206.7.100.20.5.1.1ColumndcscmdcPortbindingPortNameread-onlycurrentDcscm destination control multicast,The Port index of rule
1.3.6.1.4.1.57206.7.100.20.5.1.2ColumndcscmdcPortbindingAclNumberread-createcurrentDcscm destination control multicast,The Acl number of rule;0 means del the rule binded to port
1.3.6.1.4.1.57206.7.100.26NodepriPoeConfig
1.3.6.1.4.1.57206.7.100.26.6ScalarpoeCurrentPowerread-onlycurrentThe power inline current export power. It is a real time value.
1.3.6.1.4.1.57206.7.100.26.10TablepoePortConfigTablenot-accessiblecurrentThe power inline port configuration table
1.3.6.1.4.1.57206.7.100.26.10.1RowpoePortConfigEntrynot-accessiblecurrentThe power inline configuration in port.
1.3.6.1.4.1.57206.7.100.26.10.1.2ColumnpoePortStatusread-onlycurrentThe power inline port switch. Enable expresses it is turned on, while disable indicates that off.
1.3.6.1.4.1.57206.7.100.26.10.1.3ColumnpoePortPriorityread-onlycurrentThe power inline port priority.
1.3.6.1.4.1.57206.7.100.26.10.1.5ColumnpoePortCurrentPowerread-onlycurrentThe power inline port used power. It is a real time value.
1.3.6.1.4.1.57206.7.100.26.10.1.6ColumnpoePortCurrentCurrentread-onlycurrentThe power inline port export current. It is a real time value.
1.3.6.1.4.1.57206.7.100.26.10.1.7ColumnpoePortCurrentVoltageread-onlycurrentThe power inline port export voltage. It is a real time value.
1.3.6.1.4.1.57206.7.100.26.10.1.9ColumnpoePortPdClassread-onlycurrentThe connected PD class of power inline
1.3.6.1.4.1.57206.7.100.30Nodeddm
1.3.6.1.4.1.57206.7.100.30.1TableddmTranscDiagnosisTablenot-accessiblecurrentA list of ddm transceiver diagnosis information.
1.3.6.1.4.1.57206.7.100.30.1.1RowddmTranscDiagnosisEntrynot-accessiblecurrententry for ddm transceiver diagnosis information.
1.3.6.1.4.1.57206.7.100.30.1.1.1ColumnddmDiagnosisIfIndexread-onlycurrentinterface NO.
1.3.6.1.4.1.57206.7.100.30.1.1.2ColumnddmDiagnosisTemperatureread-onlycurrentcurrent Temperature of the port,and the unit is C.
1.3.6.1.4.1.57206.7.100.30.1.1.3ColumnddmDiagTempHighAlarmThresholdread-onlycurrentHigh alarm threshold of Temperature.
1.3.6.1.4.1.57206.7.100.30.1.1.4ColumnddmDiagTempLowAlarmThresholdread-onlycurrentLow alarm threshold of Temperature.
1.3.6.1.4.1.57206.7.100.30.1.1.5ColumnddmDiagTempHighWarnThresholdread-onlycurrentHigh warn threshold of Temperature.
1.3.6.1.4.1.57206.7.100.30.1.1.6ColumnddmDiagTempLowWarnThresholdread-onlycurrentLow warn threshold of Temperature.
1.3.6.1.4.1.57206.7.100.30.1.1.7ColumnddmDiagnosisVoltageread-onlycurrentvoltage of the port,and the unit is V.
1.3.6.1.4.1.57206.7.100.30.1.1.8ColumnddmDiagVoltHighAlarmThresholdread-onlycurrentHigh alarm threshold of Voltage.
1.3.6.1.4.1.57206.7.100.30.1.1.9ColumnddmDiagVoltLowAlarmThresholdread-onlycurrentLow alarm threshold of Voltage.
1.3.6.1.4.1.57206.7.100.30.1.1.10ColumnddmDiagVoltHighWarnThresholdread-onlycurrentHigh warn threshold of Voltage.
1.3.6.1.4.1.57206.7.100.30.1.1.11ColumnddmDiagVoltLowWarnThresholdread-onlycurrentLow warn threshold of Voltage.
1.3.6.1.4.1.57206.7.100.30.1.1.12ColumnddmDiagnosisBiasread-onlycurrentbias of the port,the unit is mA.
1.3.6.1.4.1.57206.7.100.30.1.1.13ColumnddmDiagBiasHighAlarmThresholdread-onlycurrentHigh alarm threshold of Bias.
1.3.6.1.4.1.57206.7.100.30.1.1.14ColumnddmDiagBiasLowAlarmThresholdread-onlycurrentLow alarm threshold of Bias.
1.3.6.1.4.1.57206.7.100.30.1.1.15ColumnddmDiagBiasHighWarnThresholdread-onlycurrentHigh warn threshold of Bias.
1.3.6.1.4.1.57206.7.100.30.1.1.16ColumnddmDiagBiasLowWarnThresholdread-onlycurrentLow warn threshold of Bias.
1.3.6.1.4.1.57206.7.100.30.1.1.17ColumnddmDiagnosisRXPowerread-onlycurrentRXPower of the port,and the unit is dBM,if the value of RXPower is infinitesimal,then set it to '-'.
1.3.6.1.4.1.57206.7.100.30.1.1.18ColumnddmDiagRXPowerHighAlarmThresholdread-onlycurrentHigh alarm threshold of RXPower.
1.3.6.1.4.1.57206.7.100.30.1.1.19ColumnddmDiagRXPowerLowAlarmThresholdread-onlycurrentLow alarm threshold of RXPower.
1.3.6.1.4.1.57206.7.100.30.1.1.20ColumnddmDiagRXPowerHighWarnThresholdread-onlycurrentHigh warn threshold of RXPower.
1.3.6.1.4.1.57206.7.100.30.1.1.21ColumnddmDiagRXPowerLowWarnThresholdread-onlycurrentLow warn threshold of RXPower.
1.3.6.1.4.1.57206.7.100.30.1.1.22ColumnddmDiagnosisTXPowerread-onlycurrentTXPower of the port,and the unit is dBM,if the value of TXPoweris infinitesimal,then set it to '-'.
1.3.6.1.4.1.57206.7.100.30.1.1.23ColumnddmDiagTXPowerHighAlarmThresholdread-onlycurrentHigh alarm threshold of TXPower.
1.3.6.1.4.1.57206.7.100.30.1.1.24ColumnddmDiagTXPowerLowAlarmThresholdread-onlycurrentk=Low alarm threshold of TXPower.
1.3.6.1.4.1.57206.7.100.30.1.1.25ColumnddmDiagTXPowerHighWarnThresholdread-onlycurrentHigh warn threshold of TXPower.
1.3.6.1.4.1.57206.7.100.30.1.1.26ColumnddmDiagTXPowerLowWarnThresholdread-onlycurrentLow warn threshold of TXPower.
1.3.6.1.4.1.57206.7.100.30.3TableddmTranscBasicInfoTablenot-accessiblecurrentBasic info of ddm transceiver alarm information.
1.3.6.1.4.1.57206.7.100.30.3.1RowddmTranscBasicInfoEntrynot-accessiblecurrententry for ddm transceiver basic information.
1.3.6.1.4.1.57206.7.100.30.3.1.1ColumnddmTransSerialIndexread-onlycurrentddm Trans Serial Index .
1.3.6.1.4.1.57206.7.100.30.3.1.2ColumnddmTransSerialNameread-onlycurrentddm Trans Serial Name.
1.3.6.1.4.1.57206.7.100.30.3.1.3ColumnddmTransSerialNoread-onlycurrentddm transceiver Serial number.
1.3.6.1.4.1.57206.7.100.30.3.1.4ColumnddmTransSerialVendorNameread-onlycurrentddm transceiver Vendor Name.
1.3.6.1.4.1.57206.7.100.30.3.1.5ColumnddmTransSerialModelNameread-onlycurrentddm transceiver Model Name:SFP,SFP+,QSFP+,QSFP,XFP,etc.
1.3.6.1.4.1.57206.7.100.30.3.1.6ColumnddmTransSerialTypeNameread-onlycurrentddm transceiver Type Name:1000BASE-T,10GBASE-LR,etc.
1.3.6.1.4.1.57206.7.100.30.3.1.7ColumnddmTransSerialBitRateread-onlycurrentddm transceiver bit rate:1300Mbit/s,10300Mbit/s,etc.
1.3.6.1.4.1.57206.7.100.30.3.1.8ColumnddmTransSerialWaveLengthread-onlycurrentddm transceiver Wave Length:1310nm,etc.
1.3.6.1.4.1.57206.7.100.32NodeportSecurity
1.3.6.1.4.1.57206.7.100.32.1TablenewPortSecurityTablenot-accessiblecurrentThe Port Security information table.
1.3.6.1.4.1.57206.7.100.32.1.1RownewPortSecurityEntrynot-accessiblecurrentThe index of this table is port index.
1.3.6.1.4.1.57206.7.100.32.1.1.1ColumnportSecurityPortIndexread-onlycurrentSecure Port Index.
1.3.6.1.4.1.57206.7.100.32.1.1.2ColumnportSecurityStateread-createcurrentenable or disable port security on this port.
1.3.6.1.4.1.57206.7.100.32.1.1.4ColumnportSecurityMaxMacNumread-createcurrentThe maximum number of security mac can be set or learned on the secure port.
1.3.6.1.4.1.57206.7.100.32.1.1.10ColumnportSecurityVioModeread-createcurrentThe violation mode of secure port mac count reach the threshold.The default mode is shutdown,if you want to disable violation mode,you can config shutdown mode.
1.3.6.1.4.1.57206.7.100.33NodemacNotificationMib
1.3.6.1.4.1.57206.7.100.33.1NodemacNotificationMibObjects
1.3.6.1.4.1.57206.7.100.33.1.1NodemacNotificationGlobalObjects
1.3.6.1.4.1.57206.7.100.33.1.1.2ScalarmacNotificationNotificationIntervalread-onlycurrentThis object specifies the maximum interval of time between macNotificationMacChangedNotifications being generated by the device. If the value of macNotificatio…
1.3.6.1.4.1.57206.7.100.33.1.1.5ScalarmacNotificationNotificationsEnabledread-writecurrentIndicates whether macNotificationMacChangedNotification notifications will or will not be sent when there are MAC addresses learnt or removed from the device's…
1.3.6.1.4.1.57206.7.100.33.1.1.7ScalarmacNotificationHistTableMaxLengthread-onlycurrentThe upper limit on the number of entries that the macNotificationHistoryTable may contain. A value of 0 will prevent any history from being retained. When this…
1.3.6.1.4.1.57206.7.100.33.1.2NodemacNotificationInterfaceObjects
1.3.6.1.4.1.57206.7.100.33.1.2.1TablemacNotificationIfConfigTablenot-accessiblecurrentThis table enables or disables the generation of notification at each interface when MAC address is learnt or removed.
1.3.6.1.4.1.57206.7.100.33.1.2.1.1RowmacNotificationIfConfigEntrynot-accessiblecurrentEach entry contains the configuration for enabling the MAC notification at each interface that supports this feature.
1.3.6.1.4.1.57206.7.100.33.1.2.1.1.1ColumnmacNotificationMacAddrLearntEnableread-writecurrentIndicates whether this interface is enabled to send macNotificationMacChangedNotification when it learns a new MAC address. This variable has no effect when th…
1.3.6.1.4.1.57206.7.100.33.1.2.1.1.2ColumnmacNotificationMacAddrRemovedEnableread-writecurrentIndicates whether this interface is enabled to send macNotificationMacChangedNotification when a MAC address which it learnt previously is removed from the for…
1.3.6.1.4.1.57206.7.100.100NodeisolatePortCfg
1.3.6.1.4.1.57206.7.100.100.1TableisolatePortCfgTablenot-accessiblecurrentThe Port Security information table.
1.3.6.1.4.1.57206.7.100.100.1.1RowisolatePortCfgEntrynot-accessiblecurrentIsolate-port information entry.
1.3.6.1.4.1.57206.7.100.100.1.1.1ColumnisolatePortCfgIndexread-onlycurrentAn unique value for each port.
1.3.6.1.4.1.57206.7.100.100.1.1.2ColumnisolatePortCfgPortsread-createcurrentIt specifies the ports indexes to which traffic is prohibited from being sent. Example: 5001 5002 5003 . Set empty value to remove OID.
1.3.6.1.4.1.57206.7.101Nodenotifications
1.3.6.1.4.1.57206.7.101.102Nodepower
1.3.6.1.4.1.57206.7.101.102.1NotificationpowerAbnormalOIDcurrentsys power DC is working!
1.3.6.1.4.1.57206.7.101.102.2NotificationpowerNormalOIDcurrentsys power AC is working!
1.3.6.1.4.1.57206.7.101.102.3NotificationpowerInsertOIDcurrentsys power insert!
1.3.6.1.4.1.57206.7.101.102.4NotificationpowerPullOutOIDcurrentsys power pull out!
1.3.6.1.4.1.57206.7.101.102.5NotificationpowerLowVoltageOIDcurrentBattery Voltage low
1.3.6.1.4.1.57206.7.101.105NodestormControl
1.3.6.1.4.1.57206.7.101.105.1NotificationstromControlErrdisablecurrentErrdisable interface due to (broadcast|multicast|unicast) rate exceed strom-control limit
1.3.6.1.4.1.57206.7.101.105.5NotificationstromControlLogcurrentBroadcast|Multicast|Unicast traffic rate on Interface exceed storm-control rate
1.3.6.1.4.1.57206.7.101.107NodemacNotifications
1.3.6.1.4.1.57206.7.101.107.1NotificationmacNotificationAddcurrentNotification due to new src mac reached on interface
1.3.6.1.4.1.57206.7.101.107.2NotificationmacNotificationRemovecurrentNotification due to src mac removed on interface
1.3.6.1.4.1.57206.7.101.111NodeportSecurity-trap
1.3.6.1.4.1.57206.7.101.111.1NotificationportSecurityTrapcurrentPort-security has reached the threshold on Interface
1.3.6.1.4.1.57206.7.101.112NodeloopBackDetect-trap
1.3.6.1.4.1.57206.7.101.112.1NotificationloopBackDetectTrapcurrentLoopbackdetect has reached on Interface
1.3.6.1.4.1.57206.7.101.126NodeauthLogGroup
1.3.6.1.4.1.57206.7.101.126.1NotificationauthLogincurrentUser Login.
1.3.6.1.4.1.57206.7.101.126.2NotificationauthLogoutcurrentUser Logout.
1.3.6.1.4.1.57206.7.101.131NodereloadInfo
1.3.6.1.4.1.57206.7.101.131.1NotificationreloadInfoTrapOIDcurrentreload information
1.3.6.1.4.1.57206.7.102Nodeconformance
Type Definitions
NameSyntaxStatusDescription
EnabledStatusPrivateINTEGER { enabled(1), disabled(0) }currentA simple status value for the object.
InetAddressOCTET STRING (SIZE (0..255))currentDenotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType…
InetAddressTypeINTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) }currentA value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indica…
InterfaceIndexInteger32 (1..2147483647)currentA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must re…
InterfaceIndexOrZeroInteger32 (0..2147483647)currentThis textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits t…
Ipv6AddressOCTET STRING (SIZE (16))currentThis data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order.
OspfAreaIDIpAddresscurrentAn OSPF Area Identifier.
OspfBigMetricInteger32 (0..'FFFFFE'h)currentThe OSPF External Metric.
PhysAddressOCTET STRINGcurrentRepresents media- or physical-level addresses.
PortListOCTET STRINGcurrentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
SnmpAdminStringOCTET STRING (SIZE (0..255))currentAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct…
TimeFilterTimeTickscurrent
ValidStatusINTEGER { valid(1), invalid(0) }currentA simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destr…
VlanListOCTET STRINGcurrentVlan ID range is (1..4094), Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the mos…
MIB Viewer