NAT-MIB
258 objects
This MIB module defines the generic managed objects for NAT. Copyright (C) The Internet Society (2013). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | ifCounterDiscontinuityGroup ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus StorageType TEXTUAL-CONVENTION |
| VPN-TC-STD-MIB | VPNIdOrZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.123 | IdentitynatMIB | This MIB module defines the generic managed objects for NAT. Copyright (C) The Internet Society (2013). This version of this MIB module is part of RFC yyyy; se… | ||
| 1.3.6.1.2.1.123.0 | NodenatMIBNotifications | |||
| 1.3.6.1.2.1.123.0.1 | NotificationnatPacketDiscard | deprecated | This notification is generated when IP packets are discarded by the NAT function; e.g., due to lack of mapping space when NAT is out of addresses or ports. Not… | |
| 1.3.6.1.2.1.123.0.2 | NotificationnatNotifPoolWatermarkLow | current | This notification is generated when a pool's usage percentage becomes lower than or equal to the specified threshold. The threshold is specified by the natPool… | |
| 1.3.6.1.2.1.123.0.3 | NotificationnatNotifPoolWatermarkHigh | current | This notification is generated when a pool's usage percentage becomes greater than or equal to the specified threshold. The threshold is specified by the natPo… | |
| 1.3.6.1.2.1.123.0.4 | NotificationnatNotifMappings | current | This notification is generated when the number of active mappings exceeds the value of natMappingsNotifyThreshold. | |
| 1.3.6.1.2.1.123.0.5 | NotificationnatNotifAddrMappings | current | This notification is generated when the number of active address mappings exceeds the value of natAddrMapNotifyThreshold. | |
| 1.3.6.1.2.1.123.0.6 | NotificationnatNotifSubscriberMappings | current | This notification is generated when the number of active mappings exceeds the value of natSubscriberMapNotifyThresh, unless natSubscriberMapNotifyThresh is zer… | |
| 1.3.6.1.2.1.123.1 | NodenatMIBObjects | |||
| 1.3.6.1.2.1.123.1.1 | NodenatDefTimeouts | |||
| 1.3.6.1.2.1.123.1.1.1 | ScalarnatBindDefIdleTimeout | read-write | deprecated | The default Bind (Address Bind or Port Bind) idle timeout parameter. If the agent is capable of storing non-volatile configuration, then the value of this obje… |
| 1.3.6.1.2.1.123.1.1.2 | ScalarnatUdpDefIdleTimeout | read-write | deprecated | The default UDP idle timeout parameter. If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a r… |
| 1.3.6.1.2.1.123.1.1.3 | ScalarnatIcmpDefIdleTimeout | read-write | deprecated | The default ICMP idle timeout parameter. If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a … |
| 1.3.6.1.2.1.123.1.1.4 | ScalarnatOtherDefIdleTimeout | read-write | deprecated | The default idle timeout parameter for protocols represented by the value other (2) in NatProtocolType. If the agent is capable of storing non-volatile configu… |
| 1.3.6.1.2.1.123.1.1.5 | ScalarnatTcpDefIdleTimeout | read-write | deprecated | The default time interval that a NAT session for an established TCP connection is allowed to remain valid without any activity on the TCP connection. If the ag… |
| 1.3.6.1.2.1.123.1.1.6 | ScalarnatTcpDefNegTimeout | read-write | deprecated | The default time interval that a NAT session for a TCP connection that is not in the established state is allowed to remain valid without any activity on the T… |
| 1.3.6.1.2.1.123.1.2 | NodenatNotifCtrl | |||
| 1.3.6.1.2.1.123.1.2.1 | ScalarnatNotifThrottlingInterval | read-write | deprecated | This object controls the generation of the natPacketDiscard notification. If this object has a value of zero, then no natPacketDiscard notifications will be tr… |
| 1.3.6.1.2.1.123.1.3 | TablenatInterfaceTable | not-accessible | deprecated | This table specifies the attributes for interfaces on a device supporting NAT function. |
| 1.3.6.1.2.1.123.1.3.1 | RownatInterfaceEntry | not-accessible | deprecated | Each entry in the natInterfaceTable holds a set of parameters for an interface, instantiated by ifIndex. Therefore, the interface index must have been assigned… |
| 1.3.6.1.2.1.123.1.3.1.1 | ColumnnatInterfaceRealm | read-create | deprecated | This object identifies whether this interface is connected to the private or the public realm. |
| 1.3.6.1.2.1.123.1.3.1.2 | ColumnnatInterfaceServiceType | read-create | deprecated | An indication of the direction in which new sessions are permitted and the extent of translation done within the IP and transport headers. |
| 1.3.6.1.2.1.123.1.3.1.3 | ColumnnatInterfaceInTranslates | read-only | deprecated | Number of packets received on this interface that were translated. Discontinuities in the value of this counter can occur at reinitialization of the management… |
| 1.3.6.1.2.1.123.1.3.1.4 | ColumnnatInterfaceOutTranslates | read-only | deprecated | Number of translated packets that were sent out this interface. Discontinuities in the value of this counter can occur at reinitialization of the management sy… |
| 1.3.6.1.2.1.123.1.3.1.5 | ColumnnatInterfaceDiscards | read-only | deprecated | Number of packets that had to be rejected/dropped due to a lack of resources for this interface. Discontinuities in the value of this counter can occur at rein… |
| 1.3.6.1.2.1.123.1.3.1.6 | ColumnnatInterfaceStorageType | read-create | deprecated | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.123.1.3.1.7 | ColumnnatInterfaceRowStatus | read-create | deprecated | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the na… |
| 1.3.6.1.2.1.123.1.4 | TablenatAddrMapTable | not-accessible | deprecated | This table lists address map parameters for NAT. |
| 1.3.6.1.2.1.123.1.4.1 | RownatAddrMapEntry | not-accessible | deprecated | This entry represents an address map to be used for NAT and contributes to the dynamic and/or static address mapping tables of the NAT device. |
| 1.3.6.1.2.1.123.1.4.1.1 | ColumnnatAddrMapIndex | not-accessible | deprecated | Along with ifIndex, this object uniquely identifies an entry in the natAddrMapTable. Address map entries are applied in the order specified by natAddrMapIndex. |
| 1.3.6.1.2.1.123.1.4.1.2 | ColumnnatAddrMapName | read-create | deprecated | Name identifying all map entries in the table associated with the same interface. All map entries with the same ifIndex MUST have the same map name. |
| 1.3.6.1.2.1.123.1.4.1.3 | ColumnnatAddrMapEntryType | read-create | deprecated | This parameter can be used to set up static or dynamic address maps. |
| 1.3.6.1.2.1.123.1.4.1.4 | ColumnnatAddrMapTranslationEntity | read-create | deprecated | The end-point entity (source or destination) in inbound or outbound sessions (i.e., first packets) that may be translated by an address map entry. Session dire… |
| 1.3.6.1.2.1.123.1.4.1.5 | ColumnnatAddrMapLocalAddrType | read-create | deprecated | This object specifies the address type used for natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo. |
| 1.3.6.1.2.1.123.1.4.1.6 | ColumnnatAddrMapLocalAddrFrom | read-create | deprecated | This object specifies the first IP address of the range of IP addresses mapped by this translation entry. The value of this object must be less than or equal t… |
| 1.3.6.1.2.1.123.1.4.1.7 | ColumnnatAddrMapLocalAddrTo | read-create | deprecated | This object specifies the last IP address of the range of IP addresses mapped by this translation entry. If only a single address is being mapped, the value of… |
| 1.3.6.1.2.1.123.1.4.1.8 | ColumnnatAddrMapLocalPortFrom | read-create | deprecated | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value… |
| 1.3.6.1.2.1.123.1.4.1.9 | ColumnnatAddrMapLocalPortTo | read-create | deprecated | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value… |
| 1.3.6.1.2.1.123.1.4.1.10 | ColumnnatAddrMapGlobalAddrType | read-create | deprecated | This object specifies the address type used for natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo. |
| 1.3.6.1.2.1.123.1.4.1.11 | ColumnnatAddrMapGlobalAddrFrom | read-create | deprecated | This object specifies the first IP address of the range of IP addresses being mapped to. The value of this object must be less than or equal to the value of th… |
| 1.3.6.1.2.1.123.1.4.1.12 | ColumnnatAddrMapGlobalAddrTo | read-create | deprecated | This object specifies the last IP address of the range of IP addresses being mapped to. If only a single address is being mapped to, the value of this object i… |
| 1.3.6.1.2.1.123.1.4.1.13 | ColumnnatAddrMapGlobalPortFrom | read-create | deprecated | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value… |
| 1.3.6.1.2.1.123.1.4.1.14 | ColumnnatAddrMapGlobalPortTo | read-create | deprecated | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value… |
| 1.3.6.1.2.1.123.1.4.1.15 | ColumnnatAddrMapProtocol | read-create | deprecated | This object specifies a bitmap of protocol identifiers. |
| 1.3.6.1.2.1.123.1.4.1.16 | ColumnnatAddrMapInTranslates | read-only | deprecated | The number of inbound packets pertaining to this address map entry that were translated. Discontinuities in the value of this counter can occur at reinitializa… |
| 1.3.6.1.2.1.123.1.4.1.17 | ColumnnatAddrMapOutTranslates | read-only | deprecated | The number of outbound packets pertaining to this address map entry that were translated. Discontinuities in the value of this counter can occur at reinitializ… |
| 1.3.6.1.2.1.123.1.4.1.18 | ColumnnatAddrMapDiscards | read-only | deprecated | The number of packets pertaining to this address map entry that were dropped due to lack of addresses in the address pool identified by this address map. The v… |
| 1.3.6.1.2.1.123.1.4.1.19 | ColumnnatAddrMapAddrUsed | read-only | deprecated | The number of addresses pertaining to this address map that are currently being used from the NAT pool. The value of this object must always be zero in the cas… |
| 1.3.6.1.2.1.123.1.4.1.20 | ColumnnatAddrMapStorageType | read-create | deprecated | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.123.1.4.1.21 | ColumnnatAddrMapRowStatus | read-create | deprecated | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the na… |
| 1.3.6.1.2.1.123.1.5 | ScalarnatAddrBindNumberOfEntries | read-only | deprecated | This object maintains a count of the number of entries that currently exist in the natAddrBindTable. |
| 1.3.6.1.2.1.123.1.6 | TablenatAddrBindTable | not-accessible | deprecated | This table holds information about the currently active NAT BINDs. |
| 1.3.6.1.2.1.123.1.6.1 | RownatAddrBindEntry | not-accessible | deprecated | Each entry in this table holds information about an active address BIND. These entries are lost upon agent restart. This row has indexing which may create vari… |
| 1.3.6.1.2.1.123.1.6.1.1 | ColumnnatAddrBindLocalAddrType | not-accessible | deprecated | This object specifies the address type used for natAddrBindLocalAddr. |
| 1.3.6.1.2.1.123.1.6.1.2 | ColumnnatAddrBindLocalAddr | not-accessible | deprecated | This object represents the private-realm specific network layer address, which maps to the public-realm address represented by natAddrBindGlobalAddr. The type … |
| 1.3.6.1.2.1.123.1.6.1.3 | ColumnnatAddrBindGlobalAddrType | read-only | deprecated | This object specifies the address type used for natAddrBindGlobalAddr. |
| 1.3.6.1.2.1.123.1.6.1.4 | ColumnnatAddrBindGlobalAddr | read-only | deprecated | This object represents the public-realm network layer address that maps to the private-realm network layer address represented by natAddrBindLocalAddr. The typ… |
| 1.3.6.1.2.1.123.1.6.1.5 | ColumnnatAddrBindId | read-only | deprecated | This object represents a bind id that is dynamically assigned to each bind by a NAT enabled device. Each bind is represented by a bind id that is unique across… |
| 1.3.6.1.2.1.123.1.6.1.6 | ColumnnatAddrBindTranslationEntity | read-only | deprecated | This object represents the direction of sessions for which this bind is applicable and the endpoint entity (source or destination) within the sessions that is … |
| 1.3.6.1.2.1.123.1.6.1.7 | ColumnnatAddrBindType | read-only | deprecated | This object indicates whether the bind is static or dynamic. |
| 1.3.6.1.2.1.123.1.6.1.8 | ColumnnatAddrBindMapIndex | read-only | deprecated | This object is a pointer to the natAddrMapTable entry (and the parameters of that entry) which was used in creating this BIND. This object, in conjunction with… |
| 1.3.6.1.2.1.123.1.6.1.9 | ColumnnatAddrBindSessions | read-only | deprecated | Number of sessions currently using this BIND. |
| 1.3.6.1.2.1.123.1.6.1.10 | ColumnnatAddrBindMaxIdleTime | read-only | deprecated | This object indicates the maximum time for which this bind can be idle with no sessions attached to it. The value of this object is of relevance only for dynam… |
| 1.3.6.1.2.1.123.1.6.1.11 | ColumnnatAddrBindCurrentIdleTime | read-only | deprecated | At any given instance, this object indicates the time that this bind has been idle without any sessions attached to it. The value of this object is of relevanc… |
| 1.3.6.1.2.1.123.1.6.1.12 | ColumnnatAddrBindInTranslates | read-only | deprecated | The number of inbound packets that were successfully translated by using this bind entry. Discontinuities in the value of this counter can occur at reinitializ… |
| 1.3.6.1.2.1.123.1.6.1.13 | ColumnnatAddrBindOutTranslates | read-only | deprecated | The number of outbound packets that were successfully translated using this bind entry. Discontinuities in the value of this counter can occur at reinitializat… |
| 1.3.6.1.2.1.123.1.7 | ScalarnatAddrPortBindNumberOfEntries | read-only | deprecated | This object maintains a count of the number of entries that currently exist in the natAddrPortBindTable. |
| 1.3.6.1.2.1.123.1.8 | TablenatAddrPortBindTable | not-accessible | deprecated | This table holds information about the currently active NAPT BINDs. |
| 1.3.6.1.2.1.123.1.8.1 | RownatAddrPortBindEntry | not-accessible | deprecated | Each entry in the this table holds information about a NAPT bind that is currently active. These entries are lost upon agent restart. This row has indexing whi… |
| 1.3.6.1.2.1.123.1.8.1.1 | ColumnnatAddrPortBindLocalAddrType | not-accessible | deprecated | This object specifies the address type used for natAddrPortBindLocalAddr. |
| 1.3.6.1.2.1.123.1.8.1.2 | ColumnnatAddrPortBindLocalAddr | not-accessible | deprecated | This object represents the private-realm specific network layer address which, in conjunction with natAddrPortBindLocalPort, maps to the public-realm network l… |
| 1.3.6.1.2.1.123.1.8.1.3 | ColumnnatAddrPortBindLocalPort | not-accessible | deprecated | For a protocol value TCP or UDP, this object represents the private-realm specific port number. On the other hand, for ICMP a bind is created only for query/re… |
| 1.3.6.1.2.1.123.1.8.1.4 | ColumnnatAddrPortBindProtocol | not-accessible | deprecated | This object specifies a protocol identifier. If the value of this object is none(1), then this bind entry applies to all IP traffic. Any other value of this ob… |
| 1.3.6.1.2.1.123.1.8.1.5 | ColumnnatAddrPortBindGlobalAddrType | read-only | deprecated | This object specifies the address type used for natAddrPortBindGlobalAddr. |
| 1.3.6.1.2.1.123.1.8.1.6 | ColumnnatAddrPortBindGlobalAddr | read-only | deprecated | This object represents the public-realm specific network layer address that, in conjunction with natAddrPortBindGlobalPort, maps to the private-realm network l… |
| 1.3.6.1.2.1.123.1.8.1.7 | ColumnnatAddrPortBindGlobalPort | read-only | deprecated | For a protocol value TCP or UDP, this object represents the public-realm specific port number. On the other hand, for ICMP a bind is created only for query/res… |
| 1.3.6.1.2.1.123.1.8.1.8 | ColumnnatAddrPortBindId | read-only | deprecated | This object represents a bind id that is dynamically assigned to each bind by a NAT enabled device. Each bind is represented by a unique bind id across both th… |
| 1.3.6.1.2.1.123.1.8.1.9 | ColumnnatAddrPortBindTranslationEntity | read-only | deprecated | This object represents the direction of sessions for which this bind is applicable and the entity (source or destination) within the sessions that is subject t… |
| 1.3.6.1.2.1.123.1.8.1.10 | ColumnnatAddrPortBindType | read-only | deprecated | This object indicates whether the bind is static or dynamic. |
| 1.3.6.1.2.1.123.1.8.1.11 | ColumnnatAddrPortBindMapIndex | read-only | deprecated | This object is a pointer to the natAddrMapTable entry (and the parameters of that entry) used in creating this BIND. This object, in conjunction with the ifInd… |
| 1.3.6.1.2.1.123.1.8.1.12 | ColumnnatAddrPortBindSessions | read-only | deprecated | Number of sessions currently using this BIND. |
| 1.3.6.1.2.1.123.1.8.1.13 | ColumnnatAddrPortBindMaxIdleTime | read-only | deprecated | This object indicates the maximum time for which this bind can be idle without any sessions attached to it. The value of this object is of relevance only for d… |
| 1.3.6.1.2.1.123.1.8.1.14 | ColumnnatAddrPortBindCurrentIdleTime | read-only | deprecated | At any given instance, this object indicates the time that this bind has been idle without any sessions attached to it. The value of this object is of relevanc… |
| 1.3.6.1.2.1.123.1.8.1.15 | ColumnnatAddrPortBindInTranslates | read-only | deprecated | The number of inbound packets that were translated as per this bind entry. Discontinuities in the value of this counter can occur at reinitialization of the ma… |
| 1.3.6.1.2.1.123.1.8.1.16 | ColumnnatAddrPortBindOutTranslates | read-only | deprecated | The number of outbound packets that were translated as per this bind entry. Discontinuities in the value of this counter can occur at reinitialization of the m… |
| 1.3.6.1.2.1.123.1.9 | TablenatSessionTable | not-accessible | deprecated | The (conceptual) table containing one entry for each NAT session currently active on this NAT device. |
| 1.3.6.1.2.1.123.1.9.1 | RownatSessionEntry | not-accessible | deprecated | An entry (conceptual row) containing information about an active NAT session on this NAT device. These entries are lost upon agent restart. |
| 1.3.6.1.2.1.123.1.9.1.1 | ColumnnatSessionIndex | not-accessible | deprecated | The session ID for this NAT session. |
| 1.3.6.1.2.1.123.1.9.1.2 | ColumnnatSessionPrivateSrcEPBindId | read-only | deprecated | The bind id associated between private and public source end points. In the case of Symmetric-NAT, this should be set to zero. |
| 1.3.6.1.2.1.123.1.9.1.3 | ColumnnatSessionPrivateSrcEPBindMode | read-only | deprecated | This object indicates whether the bind indicated by the object natSessionPrivateSrcEPBindId is an address bind or an address port bind. |
| 1.3.6.1.2.1.123.1.9.1.4 | ColumnnatSessionPrivateDstEPBindId | read-only | deprecated | The bind id associated between private and public destination end points. |
| 1.3.6.1.2.1.123.1.9.1.5 | ColumnnatSessionPrivateDstEPBindMode | read-only | deprecated | This object indicates whether the bind indicated by the object natSessionPrivateDstEPBindId is an address bind or an address port bind. |
| 1.3.6.1.2.1.123.1.9.1.6 | ColumnnatSessionDirection | read-only | deprecated | The direction of this session with respect to the local network. 'inbound' indicates that this session was initiated from the public network into the private n… |
| 1.3.6.1.2.1.123.1.9.1.7 | ColumnnatSessionUpTime | read-only | deprecated | The up time of this session in one-hundredths of a second. |
| 1.3.6.1.2.1.123.1.9.1.8 | ColumnnatSessionAddrMapIndex | read-only | deprecated | This object is a pointer to the natAddrMapTable entry (and the parameters of that entry) used in creating this session. This object, in conjunction with the if… |
| 1.3.6.1.2.1.123.1.9.1.9 | ColumnnatSessionProtocolType | read-only | deprecated | The protocol type of this session. |
| 1.3.6.1.2.1.123.1.9.1.10 | ColumnnatSessionPrivateAddrType | read-only | deprecated | This object specifies the address type used for natSessionPrivateSrcAddr and natSessionPrivateDstAddr. |
| 1.3.6.1.2.1.123.1.9.1.11 | ColumnnatSessionPrivateSrcAddr | read-only | deprecated | The source IP address of the session endpoint that lies in the private network. The value of this object must be zero only when the natSessionPrivateSrcEPBindI… |
| 1.3.6.1.2.1.123.1.9.1.12 | ColumnnatSessionPrivateSrcPort | read-only | deprecated | When the value of protocol is TCP or UDP, this object represents the source port in the first packet of session while in private-realm. On the other hand, when… |
| 1.3.6.1.2.1.123.1.9.1.13 | ColumnnatSessionPrivateDstAddr | read-only | deprecated | The destination IP address of the session endpoint that lies in the private network. The value of this object must be zero when the natSessionPrivateDstEPBindI… |
| 1.3.6.1.2.1.123.1.9.1.14 | ColumnnatSessionPrivateDstPort | read-only | deprecated | When the value of protocol is TCP or UDP, this object represents the destination port in the first packet of session while in private-realm. On the other hand,… |
| 1.3.6.1.2.1.123.1.9.1.15 | ColumnnatSessionPublicAddrType | read-only | deprecated | This object specifies the address type used for natSessionPublicSrcAddr and natSessionPublicDstAddr. |
| 1.3.6.1.2.1.123.1.9.1.16 | ColumnnatSessionPublicSrcAddr | read-only | deprecated | The source IP address of the session endpoint that lies in the public network. The value of this object must be zero when the natSessionPrivateSrcEPBindId obje… |
| 1.3.6.1.2.1.123.1.9.1.17 | ColumnnatSessionPublicSrcPort | read-only | deprecated | When the value of protocol is TCP or UDP, this object represents the source port in the first packet of session while in public-realm. On the other hand, when … |
| 1.3.6.1.2.1.123.1.9.1.18 | ColumnnatSessionPublicDstAddr | read-only | deprecated | The destination IP address of the session endpoint that lies in the public network. The value of this object must be non-zero when the natSessionPrivateDstEPBi… |
| 1.3.6.1.2.1.123.1.9.1.19 | ColumnnatSessionPublicDstPort | read-only | deprecated | When the value of protocol is TCP or UDP, this object represents the destination port in the first packet of session while in public-realm. On the other hand, … |
| 1.3.6.1.2.1.123.1.9.1.20 | ColumnnatSessionMaxIdleTime | read-only | deprecated | The max time for which this session can be idle without detecting a packet. |
| 1.3.6.1.2.1.123.1.9.1.21 | ColumnnatSessionCurrentIdleTime | read-only | deprecated | The time since a packet belonging to this session was last detected. |
| 1.3.6.1.2.1.123.1.9.1.22 | ColumnnatSessionInTranslates | read-only | deprecated | The number of inbound packets that were translated for this session. Discontinuities in the value of this counter can occur at reinitialization of the manageme… |
| 1.3.6.1.2.1.123.1.9.1.23 | ColumnnatSessionOutTranslates | read-only | deprecated | The number of outbound packets that were translated for this session. Discontinuities in the value of this counter can occur at reinitialization of the managem… |
| 1.3.6.1.2.1.123.1.10 | TablenatProtocolTable | not-accessible | deprecated | The (conceptual) table containing per protocol NAT statistics. |
| 1.3.6.1.2.1.123.1.10.1 | RownatProtocolEntry | not-accessible | deprecated | An entry (conceptual row) containing NAT statistics pertaining to a particular protocol. |
| 1.3.6.1.2.1.123.1.10.1.1 | ColumnnatProtocol | not-accessible | deprecated | This object represents the protocol pertaining to which parameters are reported. |
| 1.3.6.1.2.1.123.1.10.1.2 | ColumnnatProtocolInTranslates | read-only | deprecated | The number of inbound packets pertaining to the protocol identified by natProtocol that underwent NAT. Discontinuities in the value of this counter can occur a… |
| 1.3.6.1.2.1.123.1.10.1.3 | ColumnnatProtocolOutTranslates | read-only | deprecated | The number of outbound packets pertaining to the protocol identified by natProtocol that underwent NAT. Discontinuities in the value of this counter can occur … |
| 1.3.6.1.2.1.123.1.10.1.4 | ColumnnatProtocolDiscards | read-only | deprecated | The number of packets pertaining to the protocol identified by natProtocol that had to be rejected/dropped due to lack of resources. These rejections could be … |
| 1.3.6.1.2.1.123.1.11 | TablenatInstanceTable | not-accessible | current | Table of NAT instances. |
| 1.3.6.1.2.1.123.1.11.1 | RownatInstanceEntry | not-accessible | current | Objects related to a single NAT instance. |
| 1.3.6.1.2.1.123.1.11.1.1 | ColumnnatInstanceIndex | not-accessible | current | NAT instance index. Semantics of this number are implementation-specific. This object is used as an index for many tables defined below. |
| 1.3.6.1.2.1.123.1.11.1.2 | ColumnnatInstanceAlias | read-write | current | This object is an 'alias' name for the NAT instance as specified by a network manager, and provides a non-volatile 'handle' for the instance. On the first inst… |
| 1.3.6.1.2.1.123.1.12 | NodenatCounters | |||
| 1.3.6.1.2.1.123.1.12.1 | TablenatCountersTable | not-accessible | current | Table of counters of a NAT instance. The counters are global across L4 protocols. |
| 1.3.6.1.2.1.123.1.12.1.1 | RownatCountersEntry | not-accessible | current | Counters related to a single NAT instance. |
| 1.3.6.1.2.1.123.1.12.1.1.1 | ColumnnatTranslations | read-only | current | The number of packets translated. |
| 1.3.6.1.2.1.123.1.12.1.1.2 | ColumnnatOutOfPortErrors | read-only | current | The number of packets not translated because no external port was available, excluding quota limitations. |
| 1.3.6.1.2.1.123.1.12.1.1.3 | ColumnnatResourceErrors | read-only | current | The number of packets not translated because of resource constraints (excluding out-of-ports error and quota drops). |
| 1.3.6.1.2.1.123.1.12.1.1.4 | ColumnnatQuotaDrops | read-only | current | The number of incoming packets not translated because of quota limitations. Quotas include absolute limits as well as limits on rate of allocation. |
| 1.3.6.1.2.1.123.1.12.1.1.5 | ColumnnatMappingCreations | read-only | current | Number of mapping creations. This includes static mappings. |
| 1.3.6.1.2.1.123.1.12.1.1.6 | ColumnnatMappingRemovals | read-only | current | Number of mapping removals. This includes static mappings. |
| 1.3.6.1.2.1.123.1.12.1.1.7 | ColumnnatAddressMappingCreations | read-only | current | Number of address mapping creations. This includes static mappings. |
| 1.3.6.1.2.1.123.1.12.1.1.8 | ColumnnatAddressMappingRemovals | read-only | current | Number of address mapping removals. This includes static mappings. The number of active mappings is equal to natAddressMappingCreations - natAddressMappingRemo… |
| 1.3.6.1.2.1.123.1.12.2 | TablenatL4ProtocolTable | not-accessible | current | Table of protocols with per-protocol counters. |
| 1.3.6.1.2.1.123.1.12.2.1 | RownatL4ProtocolEntry | not-accessible | current | Per-protocol counters. |
| 1.3.6.1.2.1.123.1.12.2.1.1 | ColumnnatL4ProtocolNumber | not-accessible | current | Counters in this conceptual row apply to packets using the transport protocol identified by this object's value. |
| 1.3.6.1.2.1.123.1.12.2.1.2 | ColumnnatL4ProtocolTranslations | read-only | current | The number of packets translated. |
| 1.3.6.1.2.1.123.1.12.2.1.3 | ColumnnatL4ProtocolOutOfPortErrors | read-only | current | The number of packets not translated because no external port was available. |
| 1.3.6.1.2.1.123.1.12.2.1.4 | ColumnnatL4ProtocolResourceErrors | read-only | current | The number of packets not translated because of resource constraints (excluding out-of-ports errors and quota drops). |
| 1.3.6.1.2.1.123.1.12.2.1.5 | ColumnnatL4ProtocolQuotaDrops | read-only | current | The number of incoming packets not translated because of exceeded quotas. Quotas include absolute limits as well as limits on rate of allocation. |
| 1.3.6.1.2.1.123.1.12.2.1.6 | ColumnnatL4ProtocolMappingCreations | read-only | current | Number of mapping creations. This includes static mappings. |
| 1.3.6.1.2.1.123.1.12.2.1.7 | ColumnnatL4ProtocolMappingRemovals | read-only | current | Number of mapping removals. This includes static mappings. The number of active mappings is equal to natL4ProtocolMappingCreations - natL4ProtocolMappingRemova… |
| 1.3.6.1.2.1.123.1.13 | TablenatLimitsTable | not-accessible | current | Table of limits for a NAT instance. |
| 1.3.6.1.2.1.123.1.13.1 | RownatLimitsEntry | not-accessible | current | Limit related to a single NAT instance. |
| 1.3.6.1.2.1.123.1.13.1.1 | ColumnnatLimitMappings | read-write | current | Global limit on the total number of mappings. Zero means unlimited. |
| 1.3.6.1.2.1.123.1.13.1.2 | ColumnnatMappingsNotifyThreshold | read-write | current | See natNotifMappings. |
| 1.3.6.1.2.1.123.1.13.1.3 | ColumnnatLimitAddressMappings | read-write | current | Global limit on the total number of internal-to-external address mappings. Zero means unlimited. This limit is only applicable to NATs that have an 'IP address… |
| 1.3.6.1.2.1.123.1.13.1.4 | ColumnnatAddrMapNotifyThreshold | read-write | current | See natNotifAddrMappings. |
| 1.3.6.1.2.1.123.1.13.1.5 | ColumnnatLimitFragments | read-write | current | Global limit on the total number of fragments pending reassembly. Zero means unlimited. This limit is only applicable to NATs having 'Receive Fragments Out of … |
| 1.3.6.1.2.1.123.1.13.1.6 | ColumnnatLimitSubscribers | read-write | current | Global limit on the number of subscribers with active mappings. Zero means unlimited. |
| 1.3.6.1.2.1.123.1.14 | NodenatPoolObjects | |||
| 1.3.6.1.2.1.123.1.14.1 | TablenatPoolTable | not-accessible | current | Table of pools. |
| 1.3.6.1.2.1.123.1.14.1.1 | RownatPoolEntry | not-accessible | current | Entry in the table of pools. |
| 1.3.6.1.2.1.123.1.14.1.1.1 | ColumnnatPoolIndex | not-accessible | current | Index of an address pool. |
| 1.3.6.1.2.1.123.1.14.1.1.2 | ColumnnatPoolRealm | read-only | current | Realm to which this pool's addresses belong. |
| 1.3.6.1.2.1.123.1.14.1.1.3 | ColumnnatPoolWatermarkLow | read-create | current | Low watermark on a pool's usage, in percentage of the total number of ports available. If set to -1, the watermark is disabled. Otherwise when the usage percen… |
| 1.3.6.1.2.1.123.1.14.1.1.4 | ColumnnatPoolWatermarkHigh | read-create | current | High watermark on a pool's usage, in percentage of the total number of ports available. If set to -1, the watermark is disabled. Otherwise, when the usage perc… |
| 1.3.6.1.2.1.123.1.14.1.1.5 | ColumnnatPoolPortMin | read-create | current | Minimal port number to be allocated in this pool. |
| 1.3.6.1.2.1.123.1.14.1.1.6 | ColumnnatPoolPortMax | read-create | current | Maximal port number to be allocated in this pool. |
| 1.3.6.1.2.1.123.1.14.2 | TablenatPoolRangeTable | not-accessible | current | This table contains address ranges used by pool entries. |
| 1.3.6.1.2.1.123.1.14.2.1 | RownatPoolRangeEntry | not-accessible | current | NAT pool address range. |
| 1.3.6.1.2.1.123.1.14.2.1.1 | ColumnnatPoolRangePoolIndex | not-accessible | current | Index of the address pool to which this address range belongs. See natPoolIndex. |
| 1.3.6.1.2.1.123.1.14.2.1.2 | ColumnnatPoolRangeType | read-only | current | The address type of natPoolRangeBegin and natPoolRangeEnd. |
| 1.3.6.1.2.1.123.1.14.2.1.3 | ColumnnatPoolRangeBegin | read-only | current | Lowest address included in this range. |
| 1.3.6.1.2.1.123.1.14.2.1.4 | ColumnnatPoolRangeEnd | read-only | current | Highest address included in this range. |
| 1.3.6.1.2.1.123.1.14.2.1.5 | ColumnnatPoolRangeAllocations | read-only | current | Number of ports that have been allocated on the addresses in this range. |
| 1.3.6.1.2.1.123.1.14.2.1.6 | ColumnnatPoolRangeDeallocations | read-only | current | Number of ports that have been allocated and then deallocated on the addresses in this range. The number of ports currently allocated on the addresses in this … |
| 1.3.6.1.2.1.123.1.15 | NodenatMapObjects | |||
| 1.3.6.1.2.1.123.1.15.1 | TablenatMapIntAddrTable | not-accessible | current | Table of mappings from internal to external address. This table is only applicable to NATs that have an 'IP address pooling' behavior of 'Paired' [RFC4787]. |
| 1.3.6.1.2.1.123.1.15.1.1 | RownatMapIntAddrEntry | not-accessible | current | Mapping from internal to external address. |
| 1.3.6.1.2.1.123.1.15.1.1.1 | ColumnnatMapIntAddrIntRealm | not-accessible | current | Realm to which natMapIntAddrInt belongs. |
| 1.3.6.1.2.1.123.1.15.1.1.2 | ColumnnatMapIntAddrExtRealm | read-only | current | Realm to which natMapIntAddrExt belongs. |
| 1.3.6.1.2.1.123.1.15.1.1.3 | ColumnnatMapIntAddrIntType | not-accessible | current | Address type for natMapIntAddrInt. |
| 1.3.6.1.2.1.123.1.15.1.1.4 | ColumnnatMapIntAddrInt | not-accessible | current | Internal address. |
| 1.3.6.1.2.1.123.1.15.1.1.5 | ColumnnatMapIntAddrExtType | read-only | current | Address type for natMapIntAddrExt. |
| 1.3.6.1.2.1.123.1.15.1.1.6 | ColumnnatMapIntAddrExt | read-only | current | External address. |
| 1.3.6.1.2.1.123.1.15.1.1.7 | ColumnnatMapIntAddrSubsIndex | read-only | current | Subscriber to which this address mapping applies, or zero if it applies to all subscribers. |
| 1.3.6.1.2.1.123.1.15.2 | TablenatMappingTable | not-accessible | current | Table of mappings indexed by external 3-tuple. |
| 1.3.6.1.2.1.123.1.15.2.1 | RownatMappingEntry | not-accessible | current | A single NAT mapping. |
| 1.3.6.1.2.1.123.1.15.2.1.1 | ColumnnatMappingProto | not-accessible | current | The mapping's transport protocol number. |
| 1.3.6.1.2.1.123.1.15.2.1.2 | ColumnnatMappingExtRealm | not-accessible | current | The realm to which natMappingExtAddress belongs. |
| 1.3.6.1.2.1.123.1.15.2.1.3 | ColumnnatMappingExtAddressType | not-accessible | current | Type of the mapping's external address. |
| 1.3.6.1.2.1.123.1.15.2.1.4 | ColumnnatMappingExtAddress | not-accessible | current | The mapping's external address. If this is the undefined address, all external addresses are mapped to the internal address. |
| 1.3.6.1.2.1.123.1.15.2.1.5 | ColumnnatMappingExtPort | not-accessible | current | The mapping's external port number. If this is zero, all external ports are mapped to the internal port. |
| 1.3.6.1.2.1.123.1.15.2.1.6 | ColumnnatMappingIntRealm | read-only | current | The realm to which natMappingIntAddress belongs. |
| 1.3.6.1.2.1.123.1.15.2.1.7 | ColumnnatMappingIntAddressType | read-only | current | Type of the mapping's internal address. |
| 1.3.6.1.2.1.123.1.15.2.1.8 | ColumnnatMappingIntAddress | read-only | current | The mapping's internal address. If this is the undefined address, addresses are not translated. |
| 1.3.6.1.2.1.123.1.15.2.1.9 | ColumnnatMappingIntPort | read-only | current | The mapping's internal port number. If this is zero, ports are not translated. |
| 1.3.6.1.2.1.123.1.15.2.1.10 | ColumnnatMappingPool | read-only | current | Index of the pool that contains this mapping's external address and port. If zero, no pool is associated with this mapping. |
| 1.3.6.1.2.1.123.1.15.2.1.11 | ColumnnatMappingMapBehavior | read-only | current | Mapping behavior as described in [RFC4787] section 4.1. |
| 1.3.6.1.2.1.123.1.15.2.1.12 | ColumnnatMappingFilterBehavior | read-only | current | Filtering behavior as described in [RFC4787] section 5. |
| 1.3.6.1.2.1.123.1.15.2.1.13 | ColumnnatMappingAddressPooling | read-only | current | Type of address pooling behavior that was used to create this mapping. |
| 1.3.6.1.2.1.123.1.15.2.1.14 | ColumnnatMappingSubsIndex | read-only | current | Subscriber using this mapping. |
| 1.3.6.1.2.1.123.1.16 | NodenatSubscribers | |||
| 1.3.6.1.2.1.123.1.16.1 | TablenatSubscribersTable | not-accessible | current | Table of CGN subscribers. |
| 1.3.6.1.2.1.123.1.16.1.1 | RownatSubscribersEntry | not-accessible | current | Each entry describes a single CGN subscriber or a host served by a managed enterprise NAT. |
| 1.3.6.1.2.1.123.1.16.1.1.1 | ColumnnatSubscriberIndex | not-accessible | current | Index of the subscriber or host. |
| 1.3.6.1.2.1.123.1.16.1.1.2 | ColumnnatSubscriberIdentifierType | read-only | current | Type of additional information needed to identify the subscriber or host from incoming packets, when the packet source address does not do so unambiguously. Th… |
| 1.3.6.1.2.1.123.1.16.1.1.3 | ColumnnatSubscriberIntPrefixType | read-only | current | Subscriber's internal prefix type. |
| 1.3.6.1.2.1.123.1.16.1.1.4 | ColumnnatSubscriberIntPrefix | read-only | current | Prefix assigned to a subscriber's CPE. |
| 1.3.6.1.2.1.123.1.16.1.1.5 | ColumnnatSubscriberIntPrefixLength | read-only | current | Length of the prefix assigned to a subscriber's CPE, in bits. In case a single address is assigned, this will be 32 for IPv4 and 128 for IPv6. |
| 1.3.6.1.2.1.123.1.16.1.1.6 | ColumnnatSubscriberRealm | read-only | current | The realm to which this subscriber belongs. |
| 1.3.6.1.2.1.123.1.16.1.1.7 | ColumnnatSubscriberTranslations | read-only | current | The number of translated packets received from or sent to this subscriber. |
| 1.3.6.1.2.1.123.1.16.1.1.8 | ColumnnatSubscriberOutOfPortErrors | read-only | current | The number of packets received from this subscriber not translated because no external port was available, excluding quota limitations. |
| 1.3.6.1.2.1.123.1.16.1.1.9 | ColumnnatSubscriberResourceErrors | read-only | current | The number of packets received from this subscriber not translated because of resource constraints (excluding out-of-port errors and quota drops). |
| 1.3.6.1.2.1.123.1.16.1.1.10 | ColumnnatSubscriberQuotaDrops | read-only | current | The number of incoming packets received from or destined to this subscriber not translated because of quota limitations. Quotas include absolute limits as well… |
| 1.3.6.1.2.1.123.1.16.1.1.11 | ColumnnatSubscriberMappingCreations | read-only | current | Number of mappings created by or for this subscriber. |
| 1.3.6.1.2.1.123.1.16.1.1.12 | ColumnnatSubscriberMappingRemovals | read-only | current | Number of mappings removed by or for this subscriber. |
| 1.3.6.1.2.1.123.1.16.1.1.13 | ColumnnatSubscriberLimitMappings | read-write | current | Limit on the number of active mappings created by or for this subscriber. Zero means unlimited. |
| 1.3.6.1.2.1.123.1.16.1.1.14 | ColumnnatSubscriberMapNotifyThresh | read-write | current | See natNotifSubscriberMappings. |
| 1.3.6.1.2.1.123.1.16.1.1.15 | ColumnnatSubscriberVlanIdentifier | read-only | current | When non-zero, VLAN index used to identify subscriber in combination with packet source address. |
| 1.3.6.1.2.1.123.1.16.1.1.16 | ColumnnatSubscriberVpnIdentifier | read-only | current | When non-zero, VPN identifier used to identify subscriber in combination with packet source address. |
| 1.3.6.1.2.1.123.1.16.1.1.17 | ColumnnatSubscriberIPEncapsIdType | read-only | current | When not unknown(0), type of address of encapsulating IP ingress tunnel. |
| 1.3.6.1.2.1.123.1.16.1.1.18 | ColumnnatSubscriberIPEncapsIdAddr | read-only | current | Source address in outer header of packets incoming via IP tunnel, used to identify subscriber in combination with inner packet source address. |
| 1.3.6.1.2.1.123.1.16.2 | TablenatSubsInterfaceIdentifierTable | not-accessible | current | Table of interface indexes. If non-empty, used along with packet source address to identify the subscriber sending the packet. 'OR' semantics if multiple inter… |
| 1.3.6.1.2.1.123.1.16.2.1 | RownatSubsInterfaceIdentifierEntry | not-accessible | current | Each entry provides a single interface index. |
| 1.3.6.1.2.1.123.1.16.2.1.1 | ColumnnatSubsInterfaceIdSubsIndex | not-accessible | current | Index of the subscriber to which this conceptual table is related. |
| 1.3.6.1.2.1.123.1.16.2.1.2 | ColumnnatSubsInterfaceIdRowIndex | not-accessible | current | Row index. |
| 1.3.6.1.2.1.123.1.16.2.1.3 | ColumnnatSubsInterfaceIndex | read-only | current | Interface index of an ingress interface through which packets from this subscriber may flow. |
| 1.3.6.1.2.1.123.2 | NodenatMIBConformance | |||
| 1.3.6.1.2.1.123.2.1 | NodenatMIBGroups | |||
| 1.3.6.1.2.1.123.2.1.1 | GroupnatConfigGroup | deprecated | A collection of configuration-related information required to support management of devices supporting NAT. | |
| 1.3.6.1.2.1.123.2.1.2 | GroupnatTranslationGroup | deprecated | A collection of BIND-related objects required to support management of devices supporting NAT. | |
| 1.3.6.1.2.1.123.2.1.3 | GroupnatStatsInterfaceGroup | deprecated | A collection of NAT statistics associated with the interface on which NAT is configured, to aid troubleshooting/monitoring of the NAT operation. | |
| 1.3.6.1.2.1.123.2.1.4 | GroupnatStatsProtocolGroup | deprecated | A collection of protocol specific NAT statistics, to aid troubleshooting/monitoring of NAT operation. | |
| 1.3.6.1.2.1.123.2.1.5 | GroupnatStatsAddrMapGroup | deprecated | A collection of address map specific NAT statistics, to aid troubleshooting/monitoring of NAT operation. | |
| 1.3.6.1.2.1.123.2.1.6 | GroupnatMIBNotificationGroup | deprecated | A collection of notifications generated by devices supporting this MIB. | |
| 1.3.6.1.2.1.123.2.1.7 | GroupnatGroupStatelessObjects | current | Basic counters, limits, and thresholds that do not require stateful NAT. That is, they apply to both stateless and stateful NATs. For this MIB's purposes, stat… | |
| 1.3.6.1.2.1.123.2.1.8 | GroupnatGroupStatefulObjects | current | Basic counters, limits, and thresholds that require stateful NAT. | |
| 1.3.6.1.2.1.123.2.1.9 | GroupnatGroupAddrMapObjects | current | Objects that require 'Paired IP address pooling' behavior [RFC4787]. | |
| 1.3.6.1.2.1.123.2.1.10 | GroupnatGroupFragmentObjects | current | Objects that require 'Receive Fragments Out of Order' behavior [RFC4787]. | |
| 1.3.6.1.2.1.123.2.1.11 | GroupnatGroupBasicNotifications | current | Basic notifications. | |
| 1.3.6.1.2.1.123.2.1.12 | GroupnatGroupAddrMapNotifications | current | Notifications about address mappings. | |
| 1.3.6.1.2.1.123.2.1.13 | GroupnatGroupSubscriberObjects | current | Per-subscriber counters, limits, and thresholds. | |
| 1.3.6.1.2.1.123.2.1.14 | GroupnatGroupSubscriberNotifications | current | Subscriber notifications. | |
| 1.3.6.1.2.1.123.2.2 | NodenatMIBCompliances | |||
| 1.3.6.1.2.1.123.2.2.1 | CompliancenatMIBFullCompliance | deprecated | When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Such devices can then be both monitored and c… | |
| 1.3.6.1.2.1.123.2.2.2 | CompliancenatMIBReadOnlyCompliance | read-only | deprecated | When this MIB is implemented without support for read-create (i.e., in read-only mode), then such an implementation can claim read-only compliance. Such a devi… |
| 1.3.6.1.2.1.123.2.2.3 | CompliancenatBasicStatelessCompliance | read-only | current | Basic stateless compliance with this MIB is attained when the objects contained in the mandatory groups are implemented. |
| 1.3.6.1.2.1.123.2.2.4 | CompliancenatBasicStatefulCompliance | current | Basic stateful compliance with this MIB is attained when the objects contained in the mandatory groups are implemented. | |
| 1.3.6.1.2.1.123.2.2.5 | CompliancenatAddrMapCompliance | current | NATs that have 'Paired IP address pooling' behavior [RFC4787] and implement the objects in this group can claim this level of compliance. | |
| 1.3.6.1.2.1.123.2.2.6 | CompliancenatFragmentsCompliance | current | NATs that have 'Receive Fragments Out of Order' behavior [RFC4787] and implement the objects in this group can claim this level of compliance. | |
| 1.3.6.1.2.1.123.2.2.7 | CompliancenatCGNCompliance | current | NATs that have 'Paired IP address pooling' and 'Receive Fragments Out of Order' behavior [RFC4787] and implement the objects in this group can claim this level… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NatAddrMapId | Unsigned32 (1..4294967295) | deprecated | A unique id that is assigned to each address map by a NAT enabled device. |
| NatAssociationType | INTEGER { static (1), dynamic (2) } | deprecated | An indication of whether the association is static or dynamic. |
| NatBehaviorType | INTEGER { endpointIndependent (0), addressDependent (1), addressAndPortDependent (2) } | current | Behavior type as described in [RFC4787] sections 4.1 and 5. |
| NatBindId | Unsigned32 (1..4294967295) | deprecated | A unique id that is assigned to each bind by a NAT enabled device. |
| NatBindIdOrZero | Unsigned32 (0..4294967295) | deprecated | A unique id that is assigned to each bind by a NAT enabled device. The bind id will be zero in the case of a Symmetric NAT. |
| NatBindMode | INTEGER { addressBind (1), addressPortBind (2) } | deprecated | An indication of whether the bind is an address bind or an address port bind. |
| NatPoolId | Unsigned32 (1..4294967295) | current | A unique ID that is assigned to each pool. |
| NatPoolingType | INTEGER { arbitrary (0), paired (1) } | current | Pooling type as described in [RFC4787] sections 4.1. |
| NatProtocolMap | BITS { other (0), icmp (1), udp (2), tcp (3) } | deprecated | A bitmap of protocol identifiers that support the network address translation. Any change in this TEXTUAL-CONVENTION should also be reflected in the definition of NatProtocolType. |
| NatProtocolType | INTEGER { none (1), other (2), icmp (3), udp (4), tcp (5) } | deprecated | A list of protocols that support the network address translation. Inclusion of the values is not intended to imply that those protocols need to be supported. Any change in this TEXTUAL-CONVENTION should also be reflecte… |
| NatSessionId | Unsigned32 (1..4294967295) | deprecated | A unique id that is assigned to each session by a NAT enabled device. |
| NatTranslationEntity | BITS { inboundSrcEndPoint (0), outboundDstEndPoint(1), inboundDstEndPoint (2), outboundSrcEndPoint(3) } | deprecated | An indication of a) the direction of a session for which an address map entry, address bind or port bind is applicable, and b) the entity (source or destination) within the session that is subject to translation. |
| ProtocolNumber | Unsigned32 (0..255) | current | A transport protocol number, from the 'protocol-numbers' IANA registry. |
| SubscriberIdentifierType | INTEGER { null(0), interfaces(1), vlan(2), vpn(3), ipencaps(4), other(5) } | current | Type of additional classifying information used by the NAT to identify the subscriber from an incoming packet, when the packet source address is not sufficient to do so unambiguously. null(0) No additional information i… |
| SubscriberIndex | Unsigned32 (1..4294967295) | current | A unique ID that is assigned to each subscriber. |
| SubsInterfaceIdRowIndex | Unsigned32 (1..4294967295) | current | A unique ID that is assigned to each row in the natSubsInterfaceIdentifierTable. |
| VlanIndexOrZero | Unsigned32 | current | A value used to index per-VLAN tables: a value of 4095 is not permitted. A value of 0 indicates no index is present. If the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope w… |