MIB Viewer

NATEKS-MIB

327 objects
Added statReset to stats branch
Imported Objects
IF-MIBInterfaceIndex
RFC1213-MIBifDescr
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIenterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCDateAndTime DisplayString MacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.4249IdentitynateksAdded statReset to stats branch
1.3.6.1.4.1.4249.0NodenateksTraps
1.3.6.1.4.1.4249.0.1NotificationtlmStatusChangecurrentA tlmStatusChange trap is sent when the value of an instance tlmStatus changes. It can be utilized by an NMS to trigger polls.
1.3.6.1.4.1.4249.0.2NotificationalarmValueChangecurrentA alarmValueChange trap is sent when alarm value changes. It can be utilized by an NMS to trigger polls.
1.3.6.1.4.1.4249.0.3NotificationtftpStatusChangecurrentThis trap is sent during the process of SNMP-initiated TFTP maintenance command (TFTP software download or configuration up/download) to report current executi…
1.3.6.1.4.1.4249.0.4NotificationmacFilterViolationcurrentThis trap is sent to indicate that MAC filter access violation has happened and specific security action will be performed. Variables: macFilterViolationsIfInd…
1.3.6.1.4.1.4249.0.5NotificationdInStateChangecurrentThis trap is sent to indicate that input state has changed.
1.3.6.1.4.1.4249.0.6NotificationdOutStateChangecurrentThis trap is sent to indicate that output state has changed.
1.3.6.1.4.1.4249.1NodenateksProducts
1.3.6.1.4.1.4249.1.1Nodemegatrans3CLTU
1.3.6.1.4.1.4249.1.7Nodeorion2LTU
1.3.6.1.4.1.4249.1.8Nodemegatrans3CRGN
1.3.6.1.4.1.4249.1.11Nodemegatrans4LTU
1.3.6.1.4.1.4249.1.12Nodemegatrans4RGN
1.3.6.1.4.1.4249.1.22Nodeorion3LTU
1.3.6.1.4.1.4249.1.23Nodeorion3NTU
1.3.6.1.4.1.4249.1.24Nodeorion3repeater
1.3.6.1.4.1.4249.1.26NodeminiFlex
1.3.6.1.4.1.4249.2NodenateksMgmt
1.3.6.1.4.1.4249.2.1ScalarsystemAlarmread-onlycurrentDevice alarm state
1.3.6.1.4.1.4249.2.2ScalarsystemResetread-writecurrentWriting reset(1) to maintReset perform a restart of the device. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.3Nodecommon
1.3.6.1.4.1.4249.2.3.1Scalarmodelread-onlycurrentModel name, for example MGS-3C-RGN. It is mandatory that this only contain printable ASCII characters.
1.3.6.1.4.1.4249.2.3.2Scalaridread-writecurrentDevice ID, displayed in the main menu of the module. It is mandatory that this only contain printable ASCII characters.
1.3.6.1.4.1.4249.2.3.3ScalarhardwareVersionread-onlycurrentVersion of the device's hardware. For examle: 1.0
1.3.6.1.4.1.4249.2.3.4ScalarsoftwareVersionread-onlycurrentVersion of the device's main software and, optionally, versions of firmware loaded in DSL chipsets, etc. (if present). For examle: 3.5.0.5.9/5.0
1.3.6.1.4.1.4249.2.3.5ScalarsoftwareDateread-onlycurrentBuild date of the device's main software in MM.DD.YYYY format. Empty string, if build date is not maintained by devices software.
1.3.6.1.4.1.4249.2.3.6ScalarmoduleTyperead-onlycurrentModule type
1.3.6.1.4.1.4249.2.3.7ScalarsubrackAddressread-onlycurrentAddress of the module in the FlexGain cassette. For modules that do not have such an address, a value of 0 is returned.
1.3.6.1.4.1.4249.2.3.8ScalarerrorCoderead-onlycurrentDevice-dependent error code. Normal value for errorCode is 0, i.e. device is fully operational. Any non-zero value indicates device hardware fault to managemen…
1.3.6.1.4.1.4249.2.3.9ScalarserialNumberread-onlycurrentDevice serial number.
1.3.6.1.4.1.4249.2.4Nodeconfig
1.3.6.1.4.1.4249.2.4.1ScalarconfigRWread-writecurrentReading configRW results in reading the whole running config (as DUMP R in Megatrans 3C does). Writing configRW results in writing to startup config (as LOAD i…
1.3.6.1.4.1.4249.2.4.2ScalarconfigDefaultread-writecurrentWriting integer value to configDefault applies default profile to the configuration. Values and contents of default profiles are device-dependent.
1.3.6.1.4.1.4249.2.4.100NodeconfigSystem
1.3.6.1.4.1.4249.2.4.100.1ScalarconfigNumberValuesread-onlycurrentNumber of configuration values in device's configuration.
1.3.6.1.4.1.4249.2.4.100.2TableconfigValueTablenot-accessiblecurrentA list of configuration values. The number of entries is given by the value of configSize.
1.3.6.1.4.1.4249.2.4.100.2.1RowconfigValueEntrynot-accessiblecurrentConfiguration item.
1.3.6.1.4.1.4249.2.4.100.2.1.1ColumnvalueIdnot-accessiblecurrentA unique index of configuration value. It is constant at least until main software of the module changes.
1.3.6.1.4.1.4249.2.4.100.2.1.2ColumnvalueGroupread-onlycurrentIndex of values' configuration group in the configGroupTable.
1.3.6.1.4.1.4249.2.4.100.2.1.3ColumnvalueNameread-onlycurrentA unique name of configuration value. It is constant at least until main software of the module changes. Usually, it remains constant through the lifecycle of …
1.3.6.1.4.1.4249.2.4.100.2.1.4ColumnvalueGroupNameread-onlycurrentName of values' configuration group.
1.3.6.1.4.1.4249.2.4.100.2.1.5ColumnvalueTyperead-onlycurrentValue type.
1.3.6.1.4.1.4249.2.4.100.2.1.6ColumnvalueStatusread-onlycurrentChange status for a value. All values of valueType setNow(1) have unchanged(1) status. Status for values of valueType applyConfirm(2): Initially, all values ha…
1.3.6.1.4.1.4249.2.4.100.2.1.7ColumnvalueStartupread-writecurrentStartup value of configuration variable. Write operation changes valueStartup for values of valueType afterReset(3), valueRunning for values of valueType setNo…
1.3.6.1.4.1.4249.2.4.100.2.1.8ColumnvalueRunningread-writecurrentRunning value of configuration variable. Write operation changes valueStartup for values of valueType afterReset(3), valueRunning for values of valueType setNo…
1.3.6.1.4.1.4249.2.4.100.2.1.9ColumnvalueNewread-writecurrentNew value of configuration variable. Write operation changes valueStartup for values of valueType afterReset(3), valueRunning for values of valueType setNow(1)…
1.3.6.1.4.1.4249.2.4.100.2.1.10ColumnvalueBackupread-onlycurrentBackup value of configuration variable.
1.3.6.1.4.1.4249.2.4.100.3ScalarconfigNumberGroupsread-onlycurrentNumber of configuration groups in device's configuration.
1.3.6.1.4.1.4249.2.4.100.4TableconfigGroupTablenot-accessiblecurrentA list of configuration values. The number of entries is given by the value of configSize.
1.3.6.1.4.1.4249.2.4.100.4.1RowconfigGroupEntrynot-accessiblecurrentConfiguration group.
1.3.6.1.4.1.4249.2.4.100.4.1.1ColumngroupIdnot-accessiblecurrentA unique index of configuration group. It is constant at least until main software of the module changes.
1.3.6.1.4.1.4249.2.4.100.4.1.2ColumngroupNameread-onlycurrentName of configuration group. It is constant at least until main software of the module changes. Usually, it remains constant through the lifecycle of the produ…
1.3.6.1.4.1.4249.2.4.100.4.1.3ColumngroupTyperead-onlycurrentGroup type.
1.3.6.1.4.1.4249.2.4.100.4.1.4ColumngroupStatusread-writecurrentChange status for a groupvalue. All groups of groupType setNow(1) have unchanged(1) status. Status for groups of groupType applyConfirm(2): Initially, all valu…
1.3.6.1.4.1.4249.2.4.100.5ScalarconfigApplyAllread-writecurrentWriting applyAll(1) to configApplyAll makes APPLY ALL operation. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.4.100.6ScalarconfigConfirmread-writecurrentWriting confirm(1) to configConfirm makes CONFIRM operation. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.4.100.7ScalarconfigBackupread-writecurrentWriting backup(1) to configBackup performs BACKUP operation. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.4.100.8ScalarconfigRestoreread-writecurrentWriting restore(1) to configRestore performs RESTORE operation. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.5Nodestats
1.3.6.1.4.1.4249.2.5.1Nodeg826
1.3.6.1.4.1.4249.2.5.1.1Scalarg826Numberread-onlycurrentNumber of g826 statistics.
1.3.6.1.4.1.4249.2.5.1.2Tableg826Tablenot-accessibledeprecatedA list of g826 statistics. Each consists of an interface index in interfaces table, statistics name and g826 statistics valuess.
1.3.6.1.4.1.4249.2.5.1.2.1Rowg826Entrynot-accessibledeprecatedG826 statistics.
1.3.6.1.4.1.4249.2.5.1.2.1.1Columng826Idnot-accessibledeprecatedA unique index of this g826 statistics. It is constant at least between device reboots.
1.3.6.1.4.1.4249.2.5.1.2.1.2Columng826IfIndexread-onlydeprecatedIndex of interface in interfaces table, this g826 statistics is for.
1.3.6.1.4.1.4249.2.5.1.2.1.3Columng826Nameread-onlydeprecatedName of the statistic, for example: E1-1-CRC4, E1-2-E-Bit.
1.3.6.1.4.1.4249.2.5.1.2.1.4Columng826EBread-onlydeprecatedNumber of errored blocks.
1.3.6.1.4.1.4249.2.5.1.2.1.5Columng826ESread-onlydeprecatedNumber of errored seconds.
1.3.6.1.4.1.4249.2.5.1.2.1.6Columng826SESread-onlydeprecatedNumber of severely errored seconds.
1.3.6.1.4.1.4249.2.5.1.2.1.7Columng826BBEread-onlydeprecatedNumber of background block errors.
1.3.6.1.4.1.4249.2.5.1.2.1.8Columng826AvailableTimeread-onlydeprecatedAvailable time in seconds.
1.3.6.1.4.1.4249.2.5.1.2.1.9Columng826UnavailableTimeread-onlydeprecatedUnavailable time in seconds.
1.3.6.1.4.1.4249.2.5.1.2.1.10Columng826StatResetread-writedeprecatedWriting reset(1) to g826StatReset restarts this g826 statistic. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.5.1.3Scalarg826Resetread-writecurrentWriting reset(1) to g826Reset restarts all g826 statistics. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.5.1.4TableifG826Tablenot-accessiblecurrentA list of g826 statistics. Each consists of an interface index in interfaces table, statistics name and g826 statistics valuess.
1.3.6.1.4.1.4249.2.5.1.4.1RowifG826Entrynot-accessiblecurrentG826 statistics grouped by interface.
1.3.6.1.4.1.4249.2.5.1.4.1.1ColumnifG826Idnot-accessiblecurrentA unique index of this g826 statistics. It is constant at least between device reboots.
1.3.6.1.4.1.4249.2.5.1.4.1.2ColumnifG826IfIndexnot-accessiblecurrentIndex of interface in interfaces table, this g826 statistics is for.
1.3.6.1.4.1.4249.2.5.1.4.1.3ColumnifG826Nameread-onlycurrentName of the statistic, for example: E1-1-CRC4, E1-2-E-Bit.
1.3.6.1.4.1.4249.2.5.1.4.1.4ColumnifG826EBread-onlycurrentNumber of errored blocks.
1.3.6.1.4.1.4249.2.5.1.4.1.5ColumnifG826ESread-onlycurrentNumber of errored seconds.
1.3.6.1.4.1.4249.2.5.1.4.1.6ColumnifG826SESread-onlycurrentNumber of severely errored seconds.
1.3.6.1.4.1.4249.2.5.1.4.1.7ColumnifG826BBEread-onlycurrentNumber of background block errors.
1.3.6.1.4.1.4249.2.5.1.4.1.8ColumnifG826AvailableTimeread-onlycurrentAvailable time in seconds.
1.3.6.1.4.1.4249.2.5.1.4.1.9ColumnifG826UnavailableTimeread-onlycurrentUnavailable time in seconds.
1.3.6.1.4.1.4249.2.5.1.4.1.10ColumnifG826StatResetread-writecurrentWriting reset(1) to ifG826StatReset restarts this g826 statistic. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.5.2Nodealarms
1.3.6.1.4.1.4249.2.5.2.1ScalaralarmNumberread-onlycurrentNumber of alarms.
1.3.6.1.4.1.4249.2.5.2.2TablealarmTablenot-accessiblecurrentA list of alarms. Each consists of an interface index in interfaces table, alarm name, value and cutoff information.
1.3.6.1.4.1.4249.2.5.2.2.1RowalarmEntrynot-accessiblecurrentAlarms.
1.3.6.1.4.1.4249.2.5.2.2.1.1ColumnalarmIdread-onlycurrentA unique index of alarm. It is constant at least between device reboots.
1.3.6.1.4.1.4249.2.5.2.2.1.2ColumnalarmIfIndexread-onlycurrentIndex of interface in interfaces table, which state this alarm indicates. Alarms, that do not have associated interfaces (for example, maintenance alarms), sho…
1.3.6.1.4.1.4249.2.5.2.2.1.3ColumnalarmNameread-onlycurrentName of the alarm, for example: LOS-S, BER-H.
1.3.6.1.4.1.4249.2.5.2.2.1.4ColumnalarmValueread-onlycurrentAlarm status.
1.3.6.1.4.1.4249.2.5.2.2.1.5ColumnalarmCutoffread-onlycurrentAlarm cutoff status.
1.3.6.1.4.1.4249.2.5.2.2.1.6ColumnalarmTyperead-onlycurrentAlarm type. If none of alarm types is applicable to this alarm, all bits are zero.
1.3.6.1.4.1.4249.2.5.2.2.1.7ColumnalarmDisplayTyperead-onlycurrentSimplified alarm type to be used in trap filters
1.3.6.1.4.1.4249.2.5.2.3ScalaralarmTrapEnableread-writecurrentAlarm trap generation setup: changes in alarm state will cause trap generation when the alarmTrapEnable is true.
1.3.6.1.4.1.4249.2.5.2.4TableifAlarmTablenot-accessiblecurrentA two-dimentional array of alarms. Alarms are grouped by interface number.
1.3.6.1.4.1.4249.2.5.2.4.1RowifAlarmEntrynot-accessiblecurrentAlarms grouped by interface.
1.3.6.1.4.1.4249.2.5.2.4.1.1ColumnifAlarmIdread-onlycurrentA unique index of alarm within interface. It is constant at least between device reboots.
1.3.6.1.4.1.4249.2.5.2.4.1.2ColumnifAlarmIfIndexread-onlycurrentIndex of interface in interfaces table, which state this alarm indicates. Alarms, that do not have associated interfaces (for example, maintenance alarms), sho…
1.3.6.1.4.1.4249.2.5.2.4.1.3ColumnifAlarmNameread-onlycurrentName of the alarm, for example: LOS-S, BER-H.
1.3.6.1.4.1.4249.2.5.2.4.1.4ColumnifAlarmValueread-onlycurrentAlarm status.
1.3.6.1.4.1.4249.2.5.2.4.1.5ColumnifAlarmCutoffread-onlycurrentAlarm cutoff status.
1.3.6.1.4.1.4249.2.5.2.4.1.6ColumnifAlarmTyperead-onlycurrentAlarm type. If none of alarm types is applicable to this alarm, all bits are zero.
1.3.6.1.4.1.4249.2.5.2.4.1.7ColumnifAlarmDisplayTyperead-onlycurrentSimplified alarm type to be used in trap filters
1.3.6.1.4.1.4249.2.5.3Nodetlm
1.3.6.1.4.1.4249.2.5.3.1ScalartlmNumberread-onlycurrentNumber of tlm contacts.
1.3.6.1.4.1.4249.2.5.3.2TabletlmTablenot-accessiblecurrentA list of tlms. Each consists of tlm name, setup and status information, and trap generation setup.
1.3.6.1.4.1.4249.2.5.3.2.1RowtlmEntrynot-accessiblecurrentTLM
1.3.6.1.4.1.4249.2.5.3.2.1.1ColumntlmIdnot-accessiblecurrentA unique index of TLM. It is constant at least between device reboots.
1.3.6.1.4.1.4249.2.5.3.2.1.2ColumntlmNameread-onlycurrentName of the TLM.
1.3.6.1.4.1.4249.2.5.3.2.1.3ColumntlmStatusread-onlycurrentThe status of the TLM: on, off or detected.
1.3.6.1.4.1.4249.2.5.3.2.1.4ColumntlmLastStatusChangeread-onlycurrentThe time of last TLM status change, counted from system start.
1.3.6.1.4.1.4249.2.5.3.2.1.5ColumntlmSetupread-writecurrentTLM setup: normally open or normally closed. Writing to this variable will configure this TLM, if the device does support the write access to this variable.
1.3.6.1.4.1.4249.2.5.3.2.1.6ColumntlmTrapEnableread-writecurrentTLM trap generation setup: changes in TLM status will cause trap generation when the tlmTrapEnable is true.
1.3.6.1.4.1.4249.2.5.3.3ScalartlmClearread-writecurrentWriting reset(1) to tlmClear will clear the TLM history, and det state of all TLM indicators will become off state. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.5.4Nodedsl
1.3.6.1.4.1.4249.2.5.4.1ScalardslChannelNumberread-onlycurrentNumber of dsl channels.
1.3.6.1.4.1.4249.2.5.4.2ScalardslUnitTyperead-onlycurrentThe type of the unit: line termination units (LTU) and network termination units (NTU) will have the modem(1) value. All types of regenerators have regenerator…
1.3.6.1.4.1.4249.2.5.4.3TabledslChannelTablenot-accessiblecurrentA list of DSL channels present on this device. Each consists of DSL index, ifIndex, setup and status information.
1.3.6.1.4.1.4249.2.5.4.3.1RowdslChannelEntrynot-accessiblecurrentDSL channel
1.3.6.1.4.1.4249.2.5.4.3.1.1ColumndslChannelIdnot-accessiblecurrentA unique index of the DSL channel. It is constant for a given model.
1.3.6.1.4.1.4249.2.5.4.3.1.2ColumndslChannelIfIndexread-onlycurrentIndex in interfaces table of this DSL channel.
1.3.6.1.4.1.4249.2.5.4.3.1.3ColumndslChannelModeread-onlycurrentThe activation mode of this channel: either it is Master (xU-C) or Slave (xU-R).
1.3.6.1.4.1.4249.2.5.4.3.1.4ColumndslChannelStandardread-onlycurrentThe G.Shdsl mode this channel is working in.
1.3.6.1.4.1.4249.2.5.4.3.1.5ColumndslChannelClockReferenceread-onlycurrentThe G.Shdsl clock mode this channel is working in.
1.3.6.1.4.1.4249.2.5.4.3.1.6ColumndslChannelLineCodeConfigread-onlycurrentThe configured line code of this channel.
1.3.6.1.4.1.4249.2.5.4.3.1.7ColumndslChannelPSDConfigread-onlycurrentThe configured PSD mask (annex) of this channel.
1.3.6.1.4.1.4249.2.5.4.3.1.8ColumndslChannelBaserateConfigread-onlycurrentThe configured base data rate (in 64kbit/s units) of this channel. 0 means auto.
1.3.6.1.4.1.4249.2.5.4.3.1.9ColumndslChannelStatusread-onlycurrentThe activation status of this DSL channel.
1.3.6.1.4.1.4249.2.5.4.3.1.10ColumndslChannelLineCoderead-onlycurrentCurrent working line code of this channel. If the link is down, this item has notAvailable(0) value.
1.3.6.1.4.1.4249.2.5.4.3.1.11ColumndslChannelPSDread-onlycurrentCurrent working PSD mask (annex) of this channel. If the link is down, this item has notAvailable(0) value.
1.3.6.1.4.1.4249.2.5.4.3.1.12ColumndslChannelBaserateread-onlycurrentCurrent working base data rate (in 64kbit/s units) of this channel. If the link is down, this item has 0 value.
1.3.6.1.4.1.4249.2.5.4.3.1.13ColumndslChannelLineRateread-onlycurrentCurrent working line rate in kbit/s of this channel. If the link is down, this item has 0 value.
1.3.6.1.4.1.4249.2.5.4.3.1.14ColumndslChannelPayloadRateread-onlycurrentCurrent working payload rate in kbit/s of this channel. If the link is down, this item has 0 value.
1.3.6.1.4.1.4249.2.5.4.3.1.15ColumndslChannelNMRread-onlycurrentCurrent noise margin rate for the DSL channel in dB.
1.3.6.1.4.1.4249.2.5.4.3.1.16ColumndslChannelPowerBackoffread-onlycurrentCurrent power backoff of the local side of the DSL channel in dB.
1.3.6.1.4.1.4249.2.5.4.3.1.17ColumndslChannelFarEndPowerBackoffread-onlycurrentCurrent far end power backoff of the DSL channel in dB.
1.3.6.1.4.1.4249.2.5.4.3.1.18ColumndslChannelLoopAttenuationread-onlycurrentCurrent loop attenuation of the DSL channel in dB.
1.3.6.1.4.1.4249.2.5.4.3.1.19ColumndslChannelEOCNumberread-onlycurrentThe EOC number of the unit in this DSL link. xtuC 1 xtuR 2 repeater N=1..max N+2
1.3.6.1.4.1.4249.2.5.4.3.1.20ColumndslChannelRegeneratorNumberread-onlycurrentThe number of regenerators in the link. This unit is not present on regenerators.
1.3.6.1.4.1.4249.2.5.4.3.1.21ColumndslChannelRemotePowerread-onlycurrentThe remote power status of the channel. This item is not present on regenerators. On devices without remote powering capability it is present and always shows …
1.3.6.1.4.1.4249.2.5.4.3.1.22ColumndslChannelRemotePowerVoltageread-onlycurrentRemote power voltage configuration for the channel. This item is not present on regenerators. On devices without remote powering capability it is present and a…
1.3.6.1.4.1.4249.2.5.4.4ScalardslGroupNumberread-onlycurrentThe number of multiwire groups.
1.3.6.1.4.1.4249.2.5.4.5TabledslGroupTablenot-accessiblecurrentThis table contains information on multipair and 4-wire goups of DSL channels.
1.3.6.1.4.1.4249.2.5.4.5.1RowdslGroupEntrynot-accessiblecurrentDSL multipair of 4-wire group
1.3.6.1.4.1.4249.2.5.4.5.1.1ColumndslGroupIdnot-accessiblecurrentA unique index of the DSL channel group. It is constant between changes of unit configuration.
1.3.6.1.4.1.4249.2.5.4.5.1.2ColumndslGroupTyperead-onlycurrentThe type of channel grouping. type4wire(1) represent 4-wire method of channel aggregation. type2pair(2)-type4pair(4) represent the M-pair method of channel agg…
1.3.6.1.4.1.4249.2.5.4.5.1.3ColumndslGroupMainChannelread-onlycurrentThis is the dslChannelId of the main channel in the multipair or 4-wire group. The configuration for all channels in the group is taken from the main channel. …
1.3.6.1.4.1.4249.2.5.4.5.1.4ColumndslGroupChannel1read-onlycurrentThe first channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others.
1.3.6.1.4.1.4249.2.5.4.5.1.5ColumndslGroupChannel2read-onlycurrentThe second channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others.
1.3.6.1.4.1.4249.2.5.4.5.1.6ColumndslGroupChannel3read-onlycurrentThe third channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others. Only presen…
1.3.6.1.4.1.4249.2.5.4.5.1.7ColumndslGroupChannel4read-onlycurrentThe fourth channel in the sequence of dslChannelId's of the channels in the multipair or 4-wire group. The main channel is mentioned amongst others. Only prese…
1.3.6.1.4.1.4249.2.5.4.6ScalardslRegenerationChannelsread-onlycurrentThe number of regenerator channels working in this device.
1.3.6.1.4.1.4249.2.5.4.7TabledslRegenerationTablenot-accessiblecurrentThis table is a list of regenerator channels working in this device. Devices that do not have regenerator functions do not need to implement this table.
1.3.6.1.4.1.4249.2.5.4.7.1RowdslRegenerationEntrynot-accessiblecurrentRegeneration channel
1.3.6.1.4.1.4249.2.5.4.7.1.1ColumndslRegenerationIdnot-accessiblecurrentA unique index of the DSL regeneration channel. It is constant between configuration changes.
1.3.6.1.4.1.4249.2.5.4.7.1.2ColumndslRegenerationSide1read-onlycurrentThis is the dslChannelId of side 1 of the regeneration channel.
1.3.6.1.4.1.4249.2.5.4.7.1.3ColumndslRegenerationSide2read-onlycurrentThis is the dslChannelId of side 2 of the regeneration channel.
1.3.6.1.4.1.4249.2.5.5Nodeindication
1.3.6.1.4.1.4249.2.5.5.1ScalarindicationLedNumberread-onlycurrentNumber of LED indicators the device has.
1.3.6.1.4.1.4249.2.5.5.2TableindicationLedTablenot-accessiblecurrentA list LED indicators. Each consists of an LED index, textual description, populated/not populated status, current color and blinking rate.
1.3.6.1.4.1.4249.2.5.5.2.1RowindicationLedEntrynot-accessiblecurrentLED inidicators.
1.3.6.1.4.1.4249.2.5.5.2.1.1ColumnindicationLedIdnot-accessiblecurrentA unique index of the LED indicator. It is constant between different models of one device family.
1.3.6.1.4.1.4249.2.5.5.2.1.2ColumnindicationLedDescriptionread-onlycurrentDescription of LED indicator. May include name on the front/back panel of the device and/or place of the LED.
1.3.6.1.4.1.4249.2.5.5.2.1.3ColumnindicationLedStateread-onlycurrentThe state of a LED. If the LED is not present, it's state is not-populated. If it is not lit, it's state is OFF. If it is lit, then a color is reported.
1.3.6.1.4.1.4249.2.5.5.2.1.4ColumnindicationLedFlashread-onlycurrentIf the LED is switching on and off at a constant rate, shows how is it blinking. Values from 1 to 14 represent a bit mask, where each bit shows, if the LED is …
1.3.6.1.4.1.4249.2.5.6Nodetemperature
1.3.6.1.4.1.4249.2.5.6.1ScalartemperatureSensorNumberread-onlycurrentNumber of the temperature sensors the device has.
1.3.6.1.4.1.4249.2.5.6.2TabletemperatureSensorTablenot-accessiblecurrentA list temperature sensors. First sensor in the list should always be the sensor that can be considered as 'Board temperature' sensor. For each sensor there is…
1.3.6.1.4.1.4249.2.5.6.2.1RowtemperatureSensorEntrynot-accessiblecurrentTemperature sensors.
1.3.6.1.4.1.4249.2.5.6.2.1.1ColumntemperatureSensorIdnot-accessiblecurrentA unique index of the temperature sensor. It is constant between different models of one device family.
1.3.6.1.4.1.4249.2.5.6.2.1.2ColumntemperatureSensorDescriptionread-onlycurrentDescription of the temperature sensor. Should describe, where temperature is measured.
1.3.6.1.4.1.4249.2.5.6.2.1.3ColumntemperatureSensorValueread-onlycurrentThe temperature value in 1/1000 of the Celcium degree. For example, 25000 = 25C, -10500 = -10.5C.
1.3.6.1.4.1.4249.2.5.7Nodetime
1.3.6.1.4.1.4249.2.5.7.1ScalartimeSourceNumberread-onlycurrentNumber of device's UTC time sources.
1.3.6.1.4.1.4249.2.5.7.2TabletimeSourceTablenot-accessiblecurrentTable of UTC time sources present on device. Examples are UTC, satellite (GNSS) etc.
1.3.6.1.4.1.4249.2.5.7.2.1RowtimeSourceEntrynot-accessiblecurrentTime source.
1.3.6.1.4.1.4249.2.5.7.2.1.1ColumntimeSourceIdnot-accessiblecurrentA unique index of the time source. It is constant between reconfigurations of a device.
1.3.6.1.4.1.4249.2.5.7.2.1.2ColumntimeSourceNameread-onlycurrentName of the time source. For example: NTP.
1.3.6.1.4.1.4249.2.5.7.2.1.3ColumntimeSourceStratumread-onlycurrentClock source stratum as it is defined in NTP.
1.3.6.1.4.1.4249.2.5.7.2.1.4ColumntimeSourceValueread-onlycurrentUTC time as reported by this source. If source is not ready (no connection to server or no signal), zero-length octet string is returned.
1.3.6.1.4.1.4249.2.5.7.3ScalartimeZoneread-writecurrentDisplacement, in minutes, of local time relative to UTC. For example, 240 is UTC+04:00 (Moscow Time), -480 is UTC-08:00 (Pacific Standard Time).
1.3.6.1.4.1.4249.2.5.8NodelocalPower
1.3.6.1.4.1.4249.2.5.8.1ScalarpowerSourceNumberread-onlycurrentNumber of device's local power sources.
1.3.6.1.4.1.4249.2.5.8.2TablepowerSourceTablenot-accessiblecurrentTable of local power sources available to the device, listed in priority order.
1.3.6.1.4.1.4249.2.5.8.2.1RowpowerSourceEntrynot-accessiblecurrentPower source.
1.3.6.1.4.1.4249.2.5.8.2.1.1ColumnpowerSourceIdnot-accessiblecurrentA unique index of the power source.
1.3.6.1.4.1.4249.2.5.8.2.1.2ColumnpowerSourceNameread-onlycurrentName of the power source. For example: 48V-a.
1.3.6.1.4.1.4249.2.5.8.2.1.3ColumnpowerSourceNominalVoltageread-onlycurrentNominal voltage of the power source.
1.3.6.1.4.1.4249.2.5.8.2.1.4ColumnpowerSourceStatusread-onlycurrentAvailability status of this power source.
1.3.6.1.4.1.4249.2.5.9NodesfpDDM
1.3.6.1.4.1.4249.2.5.9.1ScalarsfpDDMNumberread-onlycurrentNumber of the sfp modules the device has.
1.3.6.1.4.1.4249.2.5.9.2TablesfpDDMTablenot-accessiblecurrentTable of DDM values read from SFP
1.3.6.1.4.1.4249.2.5.9.2.1RowsfpDDMEntrynot-accessiblecurrentSFP Digital diagnostics monitoring
1.3.6.1.4.1.4249.2.5.9.2.1.1ColumnsfpDDMIdnot-accessiblecurrentAn Index of DDM value
1.3.6.1.4.1.4249.2.5.9.2.1.2ColumnsfpDDMTemperatureread-onlycurrentInternally measured transceiver temperature in range from -128C to +128C.
1.3.6.1.4.1.4249.2.5.9.2.1.3ColumnsfpDDMSupplyVoltageread-onlycurrentInternally measured transceiver supply voltage in range from 0 to +6.5535 Volts.
1.3.6.1.4.1.4249.2.5.9.2.1.4ColumnsfpDDMTxBiasCurrentread-onlycurrentMeasured TX bias current in range from 0 to 131.0 mA
1.3.6.1.4.1.4249.2.5.9.2.1.5ColumnsfpDDMTxOutputmWread-onlycurrentMeasured TX output power in range from 0 to 6.5535 mW
1.3.6.1.4.1.4249.2.5.9.2.1.6ColumnsfpDDMTxOutputdBmread-onlycurrentMeasured TX output power in range from -40 to +8.2 dBm
1.3.6.1.4.1.4249.2.5.9.2.1.7ColumnsfpDDMRxInputmWread-onlycurrentMeasured RX received optical power from 0 to 6.5535 mW.
1.3.6.1.4.1.4249.2.5.9.2.1.8ColumnsfpDDMRxInputdBmread-onlycurrentMeasured RX received optical power from -40 to +8.2 dBm.
1.3.6.1.4.1.4249.2.5.9.2.1.9ColumnsfpDDMMediaTyperead-onlycurrentThis object returns sfpMedia type. when module is not mounted return value is unknown (3)
1.3.6.1.4.1.4249.2.5.9.2.1.10ColumnsfpDDMPresenceread-onlycurrentThis object indicates if specified SFP interface plugged or not present (1) indicates that SFP interface is plugged. absent (2) indicates that SFP interface is…
1.3.6.1.4.1.4249.2.5.9.2.1.11ColumnsfpDDMIfIndexread-onlycurrentIndex of interface in interfaces table, which state this SFP interface represents.
1.3.6.1.4.1.4249.2.5.10Nodeio
1.3.6.1.4.1.4249.2.5.10.1NodeioDIn
1.3.6.1.4.1.4249.2.5.10.1.1ScalarioDInNumberread-onlycurrentNumber of digital inputs the device has
1.3.6.1.4.1.4249.2.5.10.1.2TableioDInTablenot-accessiblecurrentDiscrete input table represents all discrete (digital) inputs present and configured in the device, including voltage inputs, dry contact inputs and any other.
1.3.6.1.4.1.4249.2.5.10.1.2.1RowioDInEntrynot-accessiblecurrentDiscrete (digital) input
1.3.6.1.4.1.4249.2.5.10.1.2.1.1ColumndInIdnot-accessiblecurrentA unique index of discrete input. It should remain constant through any reconfiguration and reboot of the device.
1.3.6.1.4.1.4249.2.5.10.1.2.1.2ColumndInNameread-onlycurrentDiscrete input name, typically - connector marking.
1.3.6.1.4.1.4249.2.5.10.1.2.1.3ColumndInStateread-onlycurrentDiscrete input state. For voltage input values are high(3) or low(4). For npn or dry contact input it is open(1) or closed(2).
1.3.6.1.4.1.4249.2.5.10.1.2.1.4ColumndInNormalStateread-writecurrentNormal discrete input state. If it is any(5), then input is considered informative, else it is has normal (normally open or normally closed) and alarm state.
1.3.6.1.4.1.4249.2.5.10.1.2.1.5ColumndInAlarmSeverityread-writecurrentdInAlarmSeverity allows systemAlarm variable to be triggered by the state of the input. Setting its to no(1) means that systemAlarm is not triggered; setting i…
1.3.6.1.4.1.4249.2.5.10.1.2.1.6ColumndInDescriptionread-writecurrentUser configurable description: input purpose, meaning, net.
1.3.6.1.4.1.4249.2.5.10.1.2.1.7ColumndInTrapEnableread-writecurrentIf true(1), trap will be sent on each change of dInState. If false(2), no traps will be sent
1.3.6.1.4.1.4249.2.5.10.2NodeioDOut
1.3.6.1.4.1.4249.2.5.10.2.1ScalarioDOutNumberread-onlycurrentNumber of digital outputs the device has
1.3.6.1.4.1.4249.2.5.10.2.2TableioDOutTablenot-accessiblecurrentDiscrete output table represents all discrete outputs present and configured in the device, including relay outputs, voltage outputs, and any other.
1.3.6.1.4.1.4249.2.5.10.2.2.1RowioDOutEntrynot-accessiblecurrentDiscrete output
1.3.6.1.4.1.4249.2.5.10.2.2.1.1ColumndOutIdnot-accessiblecurrentA unique index of discrete output. It should remain constant through any reconfiguration and reboot of the device.
1.3.6.1.4.1.4249.2.5.10.2.2.1.2ColumndOutNameread-onlycurrentDiscrete output name, typically - connector marking.
1.3.6.1.4.1.4249.2.5.10.2.2.1.3ColumndOutStateread-writecurrentDiscrete output state. For voltage output values are high(3) or low(4). For open-drain, npn, relay coil output (and other) it is active(1) or inactive(2). acti…
1.3.6.1.4.1.4249.2.5.10.2.2.1.4ColumndOutNormalStateread-writecurrentNormal discrete output state. If it is any(5), then input is considered informative, else it is has normal (normally open or normally closed) and alarm state.
1.3.6.1.4.1.4249.2.5.10.2.2.1.5ColumndOutAlarmSeverityread-writecurrentdOutAlarmSeverity allows systemAlarm variable to trigger the state of the output. Setting its to no(1) means that systemAlarm will not trigger; setting its to …
1.3.6.1.4.1.4249.2.5.10.2.2.1.6ColumndOutDescriptionread-writecurrentUser configurable description: output purpose, connected load, net.
1.3.6.1.4.1.4249.2.5.10.2.2.1.7ColumndOutTrapEnableread-writecurrentIf true(1), trap will be sent on each change of dOutState. If false(2), no traps will be sent
1.3.6.1.4.1.4249.2.5.11ScalarstatResetread-writecurrentWriting reset(1) perform a device statistics reset. All device statistics should be re-initialized. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.6Nodemaintenance
1.3.6.1.4.1.4249.2.6.1Nodetftp
1.3.6.1.4.1.4249.2.6.1.1ScalartftpServerIPread-writecurrentThe IP address of the server from which the file is loaded. This value is not stored between device reboots and should be set before each TFTP operation.
1.3.6.1.4.1.4249.2.6.1.2ScalartftpSoftFileNameread-writecurrentThe remote filename for firmware upgrade. This value is not stored between device reboots and should be set before each TFTP operation.
1.3.6.1.4.1.4249.2.6.1.3ScalartftpConfFileNameread-writecurrentThe remote filename for the up and download the startup-config. This value is not stored between device reboots and should be set before each TFTP operation.
1.3.6.1.4.1.4249.2.6.1.4ScalartftpConnectionTimeoutread-writecurrentTime the device will wait for reply from TFTP server, during connection and while transferring a block of data. While waiting, the device will retransmit it's …
1.3.6.1.4.1.4249.2.6.1.5ScalartftpNumRetriesread-writecurrentNumber of times the device will retry to connect and perform requested operation (firmware download, configuration up/download) before stopping with error stat…
1.3.6.1.4.1.4249.2.6.1.6ScalartftpTransCmdread-writecurrentThis object, when read, always returns readValue(2). Setting this object will initiate following actions: swDownload(3) Download the firmware from TFTP server,…
1.3.6.1.4.1.4249.2.6.1.7ScalartftpLastOpread-onlycurrentThis object returns the last executed maintenance operation, regardless was it successful or not. It reports following actions: noOp(1) No maintenance operatio…
1.3.6.1.4.1.4249.2.6.1.8ScalartftpTransferStatusread-onlycurrentStatus of SNMP-initiated TFTP transfer. Results: noOp(1) Default, no TFTP operation was in progress. connecting(2) Device is connecting to the server specified…
1.3.6.1.4.1.4249.2.6.1.9ScalartftpLastOpTimeread-onlycurrentThe time in timeticks when last maintenance operation (TFTP software download or configuration up/download) was executed from SNMP by setting tftpTransCmd. If …
1.3.6.1.4.1.4249.2.6.1.10ScalartftpSoftConfirmread-writecurrentWriting softConfirm(1) to tftpSoftConfirm will confirm previously uploaded firmware. Read always returns readValue(2).
1.3.6.1.4.1.4249.2.6.1.11ScalartftpProtocolVersionread-writecurrentAllows protocol selection between tftp(1), ftp(2) and sftp(3) for up/download. This value is not stored between device reboots and should be set before each op…
1.3.6.1.4.1.4249.2.6.1.12ScalartftpServerUserNameread-writecurrentThe Username for Server access. This value is not stored between device reboots and should be set before each operation.
1.3.6.1.4.1.4249.2.6.1.13ScalartftpServerUserPassread-writecurrentThe User Password for Server access. This value is not stored between device reboots and should be set before each operation.
1.3.6.1.4.1.4249.2.6.1.14ScalartftpServerPortNumberread-writecurrentThe port number for accessing FTP or SFTP server. This value is not stored between device reboots and should be set before each operation.
1.3.6.1.4.1.4249.2.7NodenateksSecurity
1.3.6.1.4.1.4249.2.7.1NodemacFilter
1.3.6.1.4.1.4249.2.7.1.1TablemacFilterConfigTablenot-accessiblecurrentTable representing MAC-based filter configuration of network interfaces.
1.3.6.1.4.1.4249.2.7.1.1.1RowmacFilterConfigEntrynot-accessiblecurrentMAC-based filter configuration of one interface
1.3.6.1.4.1.4249.2.7.1.1.1.1ColumnmacFilterConfigIfIndexnot-accessiblecurrentIndex in interfaces table of the configured interface.
1.3.6.1.4.1.4249.2.7.1.1.1.2ColumnmacFilterConfigStatusread-onlycurrentIndicates, whether filtering is on(1) or off(2).
1.3.6.1.4.1.4249.2.7.1.1.1.3ColumnmacFilterConfigActionread-onlycurrentSecurity action when non-permitted frame is received: filter - just drop the frame; indicate - drop the frame and send trap; block - drop the frame, send trap …
1.3.6.1.4.1.4249.2.7.1.2TablemacFilterWhitelistTablenot-accessiblecurrentWhite list of allowed MAC addresses.
1.3.6.1.4.1.4249.2.7.1.2.1RowmacFilterWhitelistEntrynot-accessiblecurrentWhite list
1.3.6.1.4.1.4249.2.7.1.2.1.1ColumnmacFilterWhitelistIndexnot-accessiblecurrentIndex in whitelist table.
1.3.6.1.4.1.4249.2.7.1.2.1.2ColumnmacFilterWhitelistIfIndexnot-accessiblecurrentIfIndex of the related interface.
1.3.6.1.4.1.4249.2.7.1.2.1.3ColumnmacFilterWhitelistMACread-onlycurrentPermitted MAC address
1.3.6.1.4.1.4249.2.7.1.3TablemacFilterViolationsTablenot-accessiblecurrentList of several last MAC address security violations.
1.3.6.1.4.1.4249.2.7.1.3.1RowmacFilterViolationsEntrynot-accessiblecurrentViolations list
1.3.6.1.4.1.4249.2.7.1.3.1.1ColumnmacFilterViolationsIndexnot-accessiblecurrentIndex in violations table.
1.3.6.1.4.1.4249.2.7.1.3.1.2ColumnmacFilterViolationsIfIndexread-onlycurrentIfIndex of the related interface.
1.3.6.1.4.1.4249.2.7.1.3.1.3ColumnmacFilterViolationsMACread-onlycurrentViolating MAC address
1.3.6.1.4.1.4249.2.7.1.3.1.4ColumnmacFilterViolationsTimestampread-onlycurrentTimestamp of last time an action was taken against security violation performed by this MAC address on this interface. Measured in 1/100s of second from the la…
1.3.6.1.4.1.4249.2.8NodenateksDev
1.3.6.1.4.1.4249.3NodenateksMibInfo
1.3.6.1.4.1.4249.3.1NodenateksMIBGroup
1.3.6.1.4.1.4249.3.1.1GroupnateksMinimalGroupcurrentA minimal collection of objects requred from any supporting device.
1.3.6.1.4.1.4249.3.1.2GroupnateksCommonInfoGroupcurrentBasic unit information regarding model and software of a unit.
1.3.6.1.4.1.4249.3.1.3GroupnateksCommonExtGroupcurrentExtended unit information regarding hardware and software of a unit.
1.3.6.1.4.1.4249.3.1.4GroupnateksConfigBasicGroupcurrentBasic configuration management interface.
1.3.6.1.4.1.4249.3.1.5GroupnateksConfigConfirmedGroupcurrentMinimal configuration management interface with support for Apply-Confirm configuration behaviour.
1.3.6.1.4.1.4249.3.1.6GroupnateksConfigBackupGroupcurrentLocal configuration backup management interface.
1.3.6.1.4.1.4249.3.1.7GroupnateksConfigGroupsGroupcurrentManagement interface for variable groups.
1.3.6.1.4.1.4249.3.1.8GroupnateksConfigRWGroupcurrentManagement interface for full configuration profile read/write.
1.3.6.1.4.1.4249.3.1.9GroupnateksG826GroupdeprecatedUse of g826Table is deprecated in favor of ifG826Table.
1.3.6.1.4.1.4249.3.1.10GroupnateksIfG826GroupcurrentG.826 statistics information and management.
1.3.6.1.4.1.4249.3.1.11GroupnateksAlarmGroupcurrentOld style alarm table. Using ifAlarmTable is more convenient than alarmTable. Members of this group are included into alarmValueChange notification.
1.3.6.1.4.1.4249.3.1.12GroupnateksIfAlarmGroupcurrentAlarm information and management.
1.3.6.1.4.1.4249.3.1.13GroupnateksTlmGroupcurrentTLM information and management.
1.3.6.1.4.1.4249.3.1.14GroupnateksDSLGroupcurrentDSL channel information.
1.3.6.1.4.1.4249.3.1.15GroupnateksDSLMultipairGroupcurrentDSL multi-pair bonding information.
1.3.6.1.4.1.4249.3.1.16GroupnateksDSLLTUGroupcurrentInformation aout remote power and regenerators present only on LTU/NTU DSL units.
1.3.6.1.4.1.4249.3.1.17GroupnateksDSLRegenerationGroupcurrentDSL regeneration channels information.
1.3.6.1.4.1.4249.3.1.18GroupnateksIndicationGroupcurrentLED indication status.
1.3.6.1.4.1.4249.3.1.19GroupnateksTemperatureGroupcurrentTemperature sensors data.
1.3.6.1.4.1.4249.3.1.20GroupnateksTimeGroupcurrentData from time reference sources.
1.3.6.1.4.1.4249.3.1.21GroupnateksLocalPowerGroupcurrentLocal power sources status.
1.3.6.1.4.1.4249.3.1.22GroupnateksTFTPManagementGroupcurrentSoftware upload and configuration upload/download via TFTP protocol.
1.3.6.1.4.1.4249.3.1.23GroupnateksMacFilterGroupcurrentMAC-based Ethernet port access control group.
1.3.6.1.4.1.4249.3.1.24GroupnateksSfpDDMGroupcurrentSFP DDM parameters group
1.3.6.1.4.1.4249.3.1.25GroupnateksDigitalIoGroupcurrentDigital Input/Output managementgroup
1.3.6.1.4.1.4249.3.1.26GroupnateksStatResetGroupcurrentStatistics reset group
1.3.6.1.4.1.4249.3.1.1001GroupnateksTlmNotificationGroupcurrentTLM status change notification is required if an agent implements TLM table.
1.3.6.1.4.1.4249.3.1.1002GroupnateksAlarmNotificationGroupcurrentAlarm value change notification is required if an agent implements Alarm table.
1.3.6.1.4.1.4249.3.1.1003GroupnateksTFTPNotificationGroupcurrentTFTP software or configuration management requires implementation of this notification to communicate the status of operation to the management station.
1.3.6.1.4.1.4249.3.1.1004GroupnateksMacFilterNotificationGroupcurrentNotification about security violations are required if an agent implements MAC filtering.
1.3.6.1.4.1.4249.3.1.1005GroupnateksDigitalIoNotificationGroupcurrentNotification about input/output state changes are required if an agent implements digital IO.
1.3.6.1.4.1.4249.3.2NodenateksMIBCompliance
1.3.6.1.4.1.4249.3.2.1CompliancenateksMinComplianceread-onlycurrentMinimal variable set to claim compiance with NATEKS-MIB.
1.3.6.1.4.1.4249.3.2.2CompliancenateksBasicComplianceread-onlycurrentBasic variable set to claim compiance with NATEKS-MIB.
1.3.6.1.4.1.4249.3.2.3CompliancenateksConfigBasicCompliancecurrentBasic capabilities of configuration management.
1.3.6.1.4.1.4249.3.2.4CompliancenateksConfigConfirmedCompliancecurrentCapabilities of configuration management with Apply and Confirm behaviour.
1.3.6.1.4.1.4249.3.2.5CompliancenateksConfigBackupCompliancecurrentCapabilities of local configuration backup management.
1.3.6.1.4.1.4249.3.2.6CompliancenateksConfigFullCompliancecurrentBasic capabilities of configuration management.
1.3.6.1.4.1.4249.3.2.7CompliancenateksG826Compliancenot-accessiblecurrentG.826 statistics representation and management
1.3.6.1.4.1.4249.3.2.8CompliancenateksIfAlarmComplianceaccessible-for-notifycurrentAlarm representation and management
1.3.6.1.4.1.4249.3.2.9CompliancenateksTLMCompliancecurrentTLM (dry contact inputs) representation and management
1.3.6.1.4.1.4249.3.2.10CompliancenateksDSLLTUCompliancecurrentDSL information for LTU and NTU DSL units
1.3.6.1.4.1.4249.3.2.11CompliancenateksDSLRegeneratorCompliancecurrentDSL information for DSL regenerator/repeater units
1.3.6.1.4.1.4249.3.2.12CompliancenateksIndicationCompliancecurrentLED status information.
1.3.6.1.4.1.4249.3.2.13CompliancenateksTemperatureCompliancecurrentTemperature sensors data.
1.3.6.1.4.1.4249.3.2.14CompliancenateksTimeCompliancecurrentData from time reference sources.
1.3.6.1.4.1.4249.3.2.15CompliancenateksLocalPowerCompliancecurrentLocal power sources status.
1.3.6.1.4.1.4249.3.2.16CompliancenateksTFTPManagementCompliancecurrentSoftware upload and configuration upload/download via TFTP protocol.
1.3.6.1.4.1.4249.3.2.17CompliancenateksMacFilterCompliancecurrentMAC-based Ethernet port access control group.
1.3.6.1.4.1.4249.3.2.18CompliancenateksSfpDDMGroupCompliancecurrentSFP DDM information support.
1.3.6.1.4.1.4249.3.2.19CompliancenateksDigitalIoCompliancecurrentDigital input/output management support.
1.3.6.1.4.1.4249.3.2.20CompliancenateksStatResetCompliancecurrentStatistics reset support.
Type Definitions
NameSyntaxStatusDescription
IntegerIndexInteger32 (1..2147483647)currentOne-based index to the table.
IntegerMillisInteger32currentFixed-point value with three decimal digits. For example, 25000 = 25, -10500 = -10.5.
IntegerNumberInteger32 (0..2147483647)currentNumber of some objects, for example, rows in the table. May be zero, if there are no objects or higher if there are some.
IntegerWithDecimalInteger32currentFixed-point value with one decimal digit. For example, 250 = 25, -105 = -10.5.
SfpPowerMilliWattInteger32currentSFP optical power from 0 to 6.5535 mW, in 1E-4 mW units.
MIB Viewer