NBASE-G1-MIB
204 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | -- NetworkAdress Counter enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.1 | NodenbSwitchG1 | |||
| 1.3.6.1.4.1.629.1.1 | NodenbsProducts | |||
| 1.3.6.1.4.1.629.1.1.1 | NodeminiSwitch | |||
| 1.3.6.1.4.1.629.1.1.2 | NodemegaSwitch208 | |||
| 1.3.6.1.4.1.629.1.1.3 | NodemegaSwitch215 | |||
| 1.3.6.1.4.1.629.1.1.4 | NodemegaFastSwitch | |||
| 1.3.6.1.4.1.629.1.1.5 | NodemegaSwitchII | |||
| 1.3.6.1.4.1.629.1.1.6 | NodemegaSwitch2015 | |||
| 1.3.6.1.4.1.629.1.1.7 | NodemegaSwitch2048 | |||
| 1.3.6.1.4.1.629.1.2 | NodenbsSys | |||
| 1.3.6.1.4.1.629.1.2.1 | ScalarnbsSysFwVers | read-only | mandatory | The SNMP Agent firmware version in the form Vmajor.minor |
| 1.3.6.1.4.1.629.1.2.2 | ScalarnbsSysPortsNumber | read-only | mandatory | Number of Switching Ports provided by this system. |
| 1.3.6.1.4.1.629.1.2.3 | ScalarnbsSysRestart | read-write | mandatory | This object is used to reset the system. Writing a coldRestart(2), causes the switching engine as well as the SNMP Agent CPU to be hardware resetted, similar t… |
| 1.3.6.1.4.1.629.1.2.4 | ScalarnbsSysNumRestarts | read-only | mandatory | Number of warmRestarts executed by the system, since the last coldRestart or power-on cycle.. A warmRestart may be initiated by: - writing a warmRestart value … |
| 1.3.6.1.4.1.629.1.2.5 | ScalarnbsSysLastError | read-only | mandatory | The error code of the last fatal error that generated a warm reset. |
| 1.3.6.1.4.1.629.1.2.6 | ScalarnbsSysErrUptime | read-only | mandatory | The time (in hundredths of a second) since the last cold reset/power cycle when a fatal error occured. This variable shows the system uptime from the last cold… |
| 1.3.6.1.4.1.629.1.2.7 | ScalarnbsSysSwitchDBSize | read-only | mandatory | The maximum size of the Switching Data Base. It indicates how many MAC Addresses may be stored in the system Switching Data Base. The possible values are 1024 … |
| 1.3.6.1.4.1.629.1.2.8 | ScalarnbsSysSetNvramDefaults | read-write | mandatory | Writing the value setDefaults to this objects will restore the defaults in the NVRAM data base. These values will take effect after a system reset |
| 1.3.6.1.4.1.629.1.2.9 | ScalarnbsSysResetSwitchStats | read-write | mandatory | Writing the value resetStats to this object will reset all the switching counters, for all the ports including the the Ethernet, switching and the SNMP Agent c… |
| 1.3.6.1.4.1.629.1.2.10 | ScalarnbsSysStpEnable | read-write | mandatory | Writing one of the allowed values to this object will modify the Administrative state of the Spanning Tree. This value will take effect in the next session aft… |
| 1.3.6.1.4.1.629.1.2.11 | ScalarnbsSysRunStpState | read-only | mandatory | Running state of the Spanning Tree Engine. |
| 1.3.6.1.4.1.629.1.2.12 | NodenbsSysFrmGen | |||
| 1.3.6.1.4.1.629.1.2.12.1 | ScalarnbsSysFrmGenSession | read-write | mandatory | This object controls the activity of the Frame Generator process. |
| 1.3.6.1.4.1.629.1.2.12.2 | ScalarnbsSysFrmGenDa | read-write | mandatory | The Frame Generator Destination MAC Address. |
| 1.3.6.1.4.1.629.1.2.12.3 | ScalarnbsSysFrmGenSa | read-write | mandatory | The Frame Generator Source MAC Address. |
| 1.3.6.1.4.1.629.1.2.12.4 | ScalarnbsSysFrmGenPktFill | read-write | mandatory | The Frame Generator Packet Fill Pattern. The default is 0. |
| 1.3.6.1.4.1.629.1.2.12.5 | ScalarnbsSysFrmGenPktRate | read-write | mandatory | The Frame Generator Rate, meaning the number of packets per second to be generated. Each device is able to generate a certain number of packets/second. Default… |
| 1.3.6.1.4.1.629.1.2.12.6 | ScalarnbsSysFrmGenDestMap | read-write | mandatory | The Frame Generator Destination Map = the set of ports to which the generated packets are to be sent. Each octet within the value of this object specifies a se… |
| 1.3.6.1.4.1.629.1.2.12.7 | ScalarnbsSysFrmGenPktNum | read-write | mandatory | The Frame Generator Number of Packets to be generated. Default is 1. |
| 1.3.6.1.4.1.629.1.2.12.8 | ScalarnbsSysFrmGenPktLen | read-write | mandatory | The Frame Generator Packet Length. Default is 60 bytes |
| 1.3.6.1.4.1.629.1.2.12.9 | ScalarnbsSysFrmGenXmtPktNum | read-only | mandatory | Number of Packets transmitted by the The Frame Generator. |
| 1.3.6.1.4.1.629.1.2.13 | ScalarnbsSysSelftestLevel | read-write | mandatory | NVRAM based level of the system selftest. It is supported only by the MegaSwitch II family. The values are : ststNone - meaning that no selftest will be execut… |
| 1.3.6.1.4.1.629.1.2.14 | ScalarnbsSysRomVers | read-only | mandatory | The SNMP Agent firmware Rom version |
| 1.3.6.1.4.1.629.1.3 | NodenbsSysSnmpCfg | |||
| 1.3.6.1.4.1.629.1.3.1 | ScalarnbsSysIpAddr | read-write | mandatory | The SNMP Agent Administrative value of the IP Address for the in-band access. This value is stored in the system NVRAM. The current operational IP Adress may b… |
| 1.3.6.1.4.1.629.1.3.2 | ScalarnbsSysNetMask | read-write | mandatory | The SNMP Agent Administrative value of the subnet mask for the in-band access. This value is stored in the system NVRAM. The current operational IP Adress may … |
| 1.3.6.1.4.1.629.1.3.3 | ScalarnbsSysBcastAddr | read-write | mandatory | The SNMP Agent Administrative value of the IP Broadcast Address for the in-band access. This value is stored in the system NVRAM. The current operational IP Ad… |
| 1.3.6.1.4.1.629.1.3.4 | ScalarnbsSysObIpAddr | read-write | mandatory | The SNMP Agent Administrative value of the IP Address for the out-band access. This value is stored in the system NVRAM. The current operational IP Adress may … |
| 1.3.6.1.4.1.629.1.3.5 | ScalarnbsSysObNetMask | read-write | mandatory | The SNMP Agent Administrative value of the subnet mask for the out-band access. This value is stored in the system NVRAM. The current operational IP Adress may… |
| 1.3.6.1.4.1.629.1.3.6 | ScalarnbsSysObBcastAddr | read-write | mandatory | The SNMP Agent Administrative value of the IP Broadcast Address for the in-band access. This value is stored in the system NVRAM. The current operational IP Ad… |
| 1.3.6.1.4.1.629.1.3.7 | ScalarnbsSysDefaultGateway | read-write | mandatory | The SNMP Agent Administrative value of the Default Gateway. This value is stored in the system NVRAM. The current operational Default Gateway IP Adress may be … |
| 1.3.6.1.4.1.629.1.3.8 | ScalarnbsSysReadComunity | read-write | mandatory | The SNMP Agent Administrative value of the read community string. This value is stored in the system NVRAM. It will take effect after a system reset |
| 1.3.6.1.4.1.629.1.3.9 | ScalarnbsSysWriteComunity | read-write | mandatory | The SNMP Agent Administrative value of the write community string. This value is stored in the system NVRAM. It will take effect after a system reset. The obje… |
| 1.3.6.1.4.1.629.1.3.10 | ScalarnbsSysBootpEnable | read-write | mandatory | The SNMP Agent value for the activation of the BOOTP process. This value is stored in the system NVRAM also and will be preserved over system resets and power … |
| 1.3.6.1.4.1.629.1.3.11 | ScalarnbsSysTrapTblMaxSize | read-only | mandatory | The maximum size (number of rows) allowed in the trap table |
| 1.3.6.1.4.1.629.1.3.12 | TablenbsSysTrapTable | not-accessible | mandatory | A table of managers to whom will the traps generated by the SNMP agent will be sent. It represents the current operational table as well as the NVRAM saved tab… |
| 1.3.6.1.4.1.629.1.3.12.1 | RownbsSysTrapEntry | not-accessible | mandatory | Contains the information necessary to generate a trap to be sent to a particular manager. The object nbsSysTrapTblEntStatus, when written is used to create or … |
| 1.3.6.1.4.1.629.1.3.12.1.1 | ColumnnbsSysTrapTblEntIndex | read-only | mandatory | The index of the entry/row in the trap table in the range 1 to the value of nbsSysTrapTblMaxSize. |
| 1.3.6.1.4.1.629.1.3.12.1.2 | ColumnnbsSysTrapTblEntStatus | read-write | mandatory | This object is used to get/set the validity of the information contained by nbsSysTrapEntry row. Setting this object to the value invalid(1) has the effect of … |
| 1.3.6.1.4.1.629.1.3.12.1.3 | ColumnnbsSysTrapTblEntIpAddr | read-write | mandatory | IP Address of a manager that is to receive the SNMP agent generated traps |
| 1.3.6.1.4.1.629.1.3.12.1.4 | ColumnnbsSysTrapTblEntComm | read-write | mandatory | Community string used by the SNMP agent in the traps generated |
| 1.3.6.1.4.1.629.1.3.13 | ScalarnbsSysTftpSwFileName | read-write | mandatory | The SNMP Agent Software File Name. This is the remote file name string provided to the TFTP client application when starting a Firmware Update process. This va… |
| 1.3.6.1.4.1.629.1.3.14 | ScalarnbsSysTftpParFileName | read-write | mandatory | The SNMP Agent Parameters File Name. This is the remote file name string provided to the TFTP server application when using the BOOTP/TFTP processin order to c… |
| 1.3.6.1.4.1.629.1.3.15 | ScalarnbsSysSerialLineMode | read-write | mandatory | The mode in which the serial line is used: by the local Administrative Interface, or as a SLIP line. Note that setting this object to adminIf(1) value while in… |
| 1.3.6.1.4.1.629.1.3.16 | ScalarnbsSysSerialSlipBaudRate | read-write | mandatory | The Serial Line Baud Rate when in SLIP Mode. This value is stored in the system NVRAM as well as in the SNMP Agent current configuration. |
| 1.3.6.1.4.1.629.1.3.17 | ScalarnbsSysTelnetSession | read-only | mandatory | This object indicates if there is any TELNET session in progress. |
| 1.3.6.1.4.1.629.1.3.18 | NodenbsSysPing | |||
| 1.3.6.1.4.1.629.1.3.18.1 | ScalarnbsSysPingSession | read-write | mandatory | This object controls the activity of the PING process progress. If GET idlePing(1) shows that the ping process is inactive - idle. If SET idlePing(1) stops an … |
| 1.3.6.1.4.1.629.1.3.18.2 | ScalarnbsSysPingAddr | read-write | mandatory | The IP Address to which the Nbase device will ping. Setting this variable initiates the ping sequence. The default value is the loopback address 127.0.0.1 . |
| 1.3.6.1.4.1.629.1.3.18.3 | ScalarnbsSysPingNumber | read-write | mandatory | The number of ICMP echo packets (pings) to be sent. The default value is 1. |
| 1.3.6.1.4.1.629.1.3.18.4 | ScalarnbsSysPingRequests | read-only | mandatory | The number of ICMP echo request (pings) sent. |
| 1.3.6.1.4.1.629.1.3.18.5 | ScalarnbsSysPingResps | read-only | mandatory | The number of ICMP echo response packets received. |
| 1.3.6.1.4.1.629.1.3.18.6 | ScalarnbsSysPingOwner | read-only | mandatory | If a Ping Process is active, then the value of this object shows who activated it: the Administrative Interface or the SNMP Agent . This object value will perm… |
| 1.3.6.1.4.1.629.1.3.19 | ScalarnbsSysTelnetHost | read-only | mandatory | This object indicates the remote IP host that connected to the local device. It is 0.0.0.0 if there is no active Telnet session |
| 1.3.6.1.4.1.629.1.3.20 | ScalarnbsSysTftpRswFileName | read-write | mandatory | The SNMP Agent Remote Software File Name. This is the remote file name string provided to the TFTP Server application by the SNMP Agent TFTP client, when initi… |
| 1.3.6.1.4.1.629.1.3.21 | ScalarnbsSysTftpServerIP | read-write | mandatory | This is the IP Address of the TFTP Server serving the software/parameter download/upload process, initiated by the SNMP agent. It is 0.0.0.0, if there is no TF… |
| 1.3.6.1.4.1.629.1.3.22 | ScalarnbsSysInitDownload | read-write | mandatory | This is used to initiate a download session from the above TFTP server. Note that the only writeable value is active(1) and activeAppl(3), if no session is act… |
| 1.3.6.1.4.1.629.1.3.23 | ScalarnbsSysParDownload | read-write | mandatory | This is used to initiate a parameter download session from the above TFTP server. Note that the only writeable value is active(1), if no session is active at t… |
| 1.3.6.1.4.1.629.1.3.24 | ScalarnbsSysParUpload | read-write | mandatory | This is used to initiate a parameter upload session to the above TFTP server. Note that the only writeable value is active(1), if no session is active at this … |
| 1.3.6.1.4.1.629.1.4 | NodenbsPortCfg | |||
| 1.3.6.1.4.1.629.1.4.1 | TablenbsPortCfgTable | not-accessible | mandatory | A list of the port configurations entries. The number of entries is given by nbsSysPortsNumber |
| 1.3.6.1.4.1.629.1.4.1.1 | RownbsPortCfgEntry | not-accessible | mandatory | Contains the information necessary to configure/describe a port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted |
| 1.3.6.1.4.1.629.1.4.1.1.1 | ColumnnbsPortCfgIndex | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to the value of nbsSysPortsNumber. |
| 1.3.6.1.4.1.629.1.4.1.1.2 | ColumnnbsPortCfgLanType | read-only | mandatory | The port LAN type that is installed (if exists). |
| 1.3.6.1.4.1.629.1.4.1.1.3 | ColumnnbsPortCfgIfType | read-only | mandatory | The port physical interface that is installed (if any). |
| 1.3.6.1.4.1.629.1.4.1.1.4 | ColumnnbsPortCfgPortSelect | read-write | mandatory | The port physical interface type selection. For regular 10 Mbps Ethernet Ports, the default value is Auto Select. 100 Base-Tx ports do not support more than on… |
| 1.3.6.1.4.1.629.1.4.1.1.5 | ColumnnbsPortCfgIfLink | read-only | mandatory | The link integrity status. This object is rellevant for a port of type Twisted Pair or Fiber Optic, 10 or 100 Mbps |
| 1.3.6.1.4.1.629.1.4.1.1.6 | ColumnnbsPortCfgPortFctrl | read-write | mandatory | The port flow control mode selection: enable (default ) or disable |
| 1.3.6.1.4.1.629.1.4.1.1.7 | ColumnnbsPortCfgPortDplex | read-write | mandatory | The port dplex mode selection: halfDuplex(1) - default or fullDuplex(2) |
| 1.3.6.1.4.1.629.1.4.1.1.8 | ColumnnbsPortCfgPortDelay | read-write | mandatory | The port forwarding delay expressed in bytes, with an acceptable range of 6..64 bytes. The default is 64 bytes. This object is supported only by the NH204-AT d… |
| 1.3.6.1.4.1.629.1.4.1.1.9 | ColumnnbsPortCfgSpeedSelect | read-write | mandatory | The Ethernet Port speed selection in the case of a different 'nbsPortCfgLanType' Ethernet ports. |
| 1.3.6.1.4.1.629.1.4.1.1.10 | ColumnnbsPortCfgEnable | read-write | mandatory | Port Enable/Disable |
| 1.3.6.1.4.1.629.1.4.1.1.11 | ColumnnbsPortCfgIsvpMode | read-write | mandatory | The Inter-Switch Virtual Mode of this port. nonIsvp(3) means the port does not support this mode of operation. Access(1) means the port is in Access mode. Trun… |
| 1.3.6.1.4.1.629.1.4.2 | ScalarnbsPortGrpCfgNum | read-only | mandatory | Maximum number of Switching Ports supported by the system. |
| 1.3.6.1.4.1.629.1.4.3 | TablenbsPortGrpCfgTable | not-accessible | mandatory | A list of the port configurations entries. The number of entries is given by nbsSysPortsNumber |
| 1.3.6.1.4.1.629.1.4.3.1 | RownbsPortGrpCfgEntry | not-accessible | mandatory | Contains the information necessary to configure/describe a port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted |
| 1.3.6.1.4.1.629.1.4.3.1.1 | ColumnnbsPortGrpCfgIndex | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to 32. |
| 1.3.6.1.4.1.629.1.4.3.1.2 | ColumnnbsPortGrpCfgGrpNumber | read-only | mandatory | number of groups |
| 1.3.6.1.4.1.629.1.4.3.1.3 | ColumnnbsPortGrpCfgPortNumber | read-only | mandatory | number of ports in group |
| 1.3.6.1.4.1.629.1.4.3.1.4 | ColumnnbsPortGrpCfgLinkStatus | read-only | mandatory | The link status of the port |
| 1.3.6.1.4.1.629.1.4.3.1.5 | ColumnnbsPortGrpCfgActivity | read-only | mandatory | The port activity |
| 1.3.6.1.4.1.629.1.5 | NodenbsEtherInfo | |||
| 1.3.6.1.4.1.629.1.5.1 | TablenbsEthInfoTable | not-accessible | mandatory | A list of the port NBase specific Ethernet Statistics. Number of entries is given by nbsSysPortsNumber |
| 1.3.6.1.4.1.629.1.5.1.1 | RownbsEthInfoEntry | not-accessible | mandatory | Contains the NBase specific Ethernet Statistics for a port. The number of rows/entries is fixed. A row/entry may not be created or deleted |
| 1.3.6.1.4.1.629.1.5.1.1.1 | ColumnnbsEthInfoIndex | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to the value of nbsSysPortsNumber. |
| 1.3.6.1.4.1.629.1.5.1.1.2 | ColumnnbsEthInfoCntFctrls | read-only | mandatory | Number of times the flow control mechanism was activated on the specified input port, due to a full buffer on the output port. The number is correct if the flo… |
| 1.3.6.1.4.1.629.1.5.1.1.3 | ColumnnbsEthInfoCntExcessFctrls | read-only | mandatory | Number of times the flow control mechanism was activated unsuccessfull 15 times. The number is correct if the flow control mechanism is enabled |
| 1.3.6.1.4.1.629.1.6 | NodenbsSwitchPerf | |||
| 1.3.6.1.4.1.629.1.6.1 | TablenbsSwitchPerfTable | not-accessible | mandatory | A list of NBase port specific performance statistics. Number of entries is given by nbsSysPortsNumber |
| 1.3.6.1.4.1.629.1.6.1.1 | RownbsSwitchPerfEntry | not-accessible | mandatory | Contains the NBase specific Ethernet Statistics for a port. The number of rows/entries is fixed. A row/entry may not be created or deleted |
| 1.3.6.1.4.1.629.1.6.1.1.1 | ColumnnbsSwitchPerfIndex | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to the value of nbsSysPortsNumber. |
| 1.3.6.1.4.1.629.1.6.1.1.2 | ColumnnbsSwitchPerfMcastPkts | read-only | mandatory | Number of Multicast packets received by the switching entity on this port |
| 1.3.6.1.4.1.629.1.6.1.1.3 | ColumnnbsSwitchPerfUnknPkts | read-only | mandatory | Number of packets received by the switching entity on this port with unknown destination port. As a result these packets were forwarded to all the switch other… |
| 1.3.6.1.4.1.629.1.6.2 | TablenbsPortFwdPerfTable | not-accessible | mandatory | A list of the NBase port specific switching performance statistics. Contains the number of packets and bytes forwarded from nbsPortFwdPerfInPort to all other n… |
| 1.3.6.1.4.1.629.1.6.2.1 | RownbsPortFwdPerfEntry | not-accessible | mandatory | Contains the NBase specific Switching Performance statistics for a port. Contains the number of packets and bytes forwarded from nbsPortFwdPerfInPort to all ot… |
| 1.3.6.1.4.1.629.1.6.2.1.1 | ColumnnbsPortFwdPerfInPort | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to the value of nbsSysPortsNumber. |
| 1.3.6.1.4.1.629.1.6.2.1.2 | ColumnnbsPortFwdPerfOutPort | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to the value of nbsSysPortsNumber. |
| 1.3.6.1.4.1.629.1.6.2.1.3 | ColumnnbsPortFwdPerfFwdPkts | read-only | mandatory | Number of packets forwarded by the switching entity from nbsPortFwdPerfInPort to nbsPortFwdPerfoutPort |
| 1.3.6.1.4.1.629.1.6.2.1.4 | ColumnnbsPortFwdPerfFwdBytes | read-only | mandatory | Number of packets forwarded by the switching entity from nbsPortFwdPerfInPort to nbsPortFwdPerfoutPort |
| 1.3.6.1.4.1.629.1.6.3 | NodenbsMgmtPerfStats | |||
| 1.3.6.1.4.1.629.1.6.3.1 | ScalarnbsMgmtPerfRcvdPkts | read-only | mandatory | Number of packets received by the SNMP Agent through the management port. |
| 1.3.6.1.4.1.629.1.6.3.2 | ScalarnbsMgmtPerfRcvdBytes | read-only | mandatory | Number of bytes received by the SNMP Agent through the management port. |
| 1.3.6.1.4.1.629.1.6.3.3 | ScalarnbsMgmtPerfFilterdPkts | read-only | mandatory | Number of packets received by the SNMP Agent through the management port, that were discarded because they carried an unknown protocol |
| 1.3.6.1.4.1.629.1.6.3.4 | ScalarnbsMgmtPerfRcvBcastPkts | read-only | mandatory | Number of broadcast packets received by the SNMP Agent through the management port. |
| 1.3.6.1.4.1.629.1.6.3.5 | ScalarnbsMgmtPerfXmtPkts | read-only | mandatory | Number of packets transmitted by the SNMP Agent through the management port. This counter indicates the number of packets generated by the Management Software.… |
| 1.3.6.1.4.1.629.1.6.3.6 | ScalarnbsMgmtPerfXmtUcastPkts | read-only | mandatory | Number of unicast packets transmitted by the SNMP Agent through the management port. |
| 1.3.6.1.4.1.629.1.6.3.7 | ScalarnbsMgmtPerfXmtMcastPkts | read-only | mandatory | Number of multicast packets transmitted by the SNMP Agent through the management port. This counter indicates the number of packets generated by the Management… |
| 1.3.6.1.4.1.629.1.6.3.8 | ScalarnbsMgmtPerfXmtBcastPkts | read-only | mandatory | Number of broadcast packets transmitted by the SNMP Agent through the management port. This counter indicates the number of packets generated by the Management… |
| 1.3.6.1.4.1.629.1.6.4 | TablenbsMgmtRcvPerfTable | not-accessible | mandatory | A list of the NBase port specific switching performance statistics. Contains the number of packets and bytes forwarded to the Management Port from all the nbsM… |
| 1.3.6.1.4.1.629.1.6.4.1 | RownbsMgmtRcvPerfEntry | not-accessible | mandatory | Contains the NBase specific Switching Performance statistics for a port. Contains the number of packets and bytes forwarded to the Management Port from all the… |
| 1.3.6.1.4.1.629.1.6.4.1.2 | ColumnnbsMgmtRcvPerfInPort | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to the value of nbsSysPortsNumber. |
| 1.3.6.1.4.1.629.1.6.4.1.3 | ColumnnbsMgmtRcvPerfFwdPkts | read-only | mandatory | Number of packets forwarded by the switching entity to the Managemnt Port from nbsMgmtRcvPerfOutPort. |
| 1.3.6.1.4.1.629.1.6.4.1.4 | ColumnnbsMgmtRcvPerfFwdBytes | read-only | mandatory | Number of bytes forwarded by the switching entity to the Managemnt Port from nbsMgmtRcvPerfOutPort. |
| 1.3.6.1.4.1.629.1.6.5 | TablenbsMgmtXmtPerfTable | not-accessible | mandatory | A list of the NBase port specific switching performance statistics. Contains the number of packets and bytes forwarded from the Management Port to all the nbsM… |
| 1.3.6.1.4.1.629.1.6.5.1 | RownbsMgmtXmtPerfEntry | not-accessible | mandatory | Contains the NBase specific Switching Performance statistics for a port. Contains the number of packets and bytes forwarded from the Management Port to all the… |
| 1.3.6.1.4.1.629.1.6.5.1.2 | ColumnnbsMgmtXmtPerfOutPort | read-only | mandatory | A unique value for each switched port. Its value ranges from 1 to the value of nbsSysPortsNumber. |
| 1.3.6.1.4.1.629.1.6.5.1.3 | ColumnnbsMgmtXmtPerfFwdPkts | read-only | mandatory | Number of packets forwarded by the switching entity from the Managemnt Port to nbsMgmtXmtPerfOutPort. |
| 1.3.6.1.4.1.629.1.6.5.1.4 | ColumnnbsMgmtXmtPerfFwdBytes | read-only | mandatory | Number of bytes forwarded by the switching entity from the Managemnt Port to nbsMgmtXmtPerfOutPort. |
| 1.3.6.1.4.1.629.1.7 | NodenbsTraps | |||
| 1.3.6.1.4.1.629.1.8 | NodenbsMiniSwDb | |||
| 1.3.6.1.4.1.629.1.9 | NodenbsMegaSwDb | |||
| 1.3.6.1.4.1.629.1.9.1 | NodenbsMegaSwRunDb | |||
| 1.3.6.1.4.1.629.1.9.1.1 | TablenbsMegaSwRunDbTable | not-accessible | mandatory | A list of the current running Learn Table entries. Number of entries is given by nbsSysSwitchDBSize |
| 1.3.6.1.4.1.629.1.9.1.1.1 | RownbsMegaSwRunDbEntry | not-accessible | mandatory | Contains the NBase specific Learn Table entry information. The information is specific to a MAC Address. The number of rows/entries is fixed. A row/entry may n… |
| 1.3.6.1.4.1.629.1.9.1.1.1.1 | ColumnnbsMegaSwRunDbIndex | read-only | mandatory | A unique value for each Current Switching Data Base Entry. Its value ranges from 1 to the value of nbsSysSwitchDBSize |
| 1.3.6.1.4.1.629.1.9.1.1.1.2 | ColumnnbsMegaSwRunDbStatus | read-only | mandatory | This object indicates the status of this entry. The default value is deleteOnTimeout(4). invalid(1) - this value indicates a inactive entry. The entry may rece… |
| 1.3.6.1.4.1.629.1.9.1.1.1.3 | ColumnnbsMegaSwRunDbAddr | read-only | mandatory | The destination MAC Address in a frame to which this entry forwarding information applies. This object can take the value of a unicast address, a group address… |
| 1.3.6.1.4.1.629.1.9.1.1.1.4 | ColumnnbsMegaSwRunDbType | read-only | mandatory | This object indicates the type of the entry and its adjacent filter. The default value is VirtualFilter(1). virtualFilter(1) - this entry was either learned by… |
| 1.3.6.1.4.1.629.1.9.1.1.1.5 | ColumnnbsMegaSwRunDbDport | read-only | mandatory | The port to which a frame containing the entry Mac Address should be forwarded, if it is not overwritten by a Virtual Filter. This object is rellevant for virt… |
| 1.3.6.1.4.1.629.1.9.1.2 | TablenbsMegaSwRunFilterTable | not-accessible | mandatory | The Switching Data Base : a list of destination filters associated with each MAC Address in the Switching Data Base. A destination filter exists for every poss… |
| 1.3.6.1.4.1.629.1.9.1.2.1 | RownbsMegaSwRunFilterEntry | not-accessible | mandatory | Contains the destination filter associated with a MAC Address in the Switching Data Base, when the packet was inputed through nbsMegaSwRunFilterSport port. |
| 1.3.6.1.4.1.629.1.9.1.2.1.1 | ColumnnbsMegaSwRunFilterStatus | read-write | mandatory | This object indicates the status of this entry. The default value is deleteOnTimeout(4). invalid(1) - this value indicates a inactive entry. The entry may rece… |
| 1.3.6.1.4.1.629.1.9.1.2.1.2 | ColumnnbsMegaSwRunFilterAddr | read-write | mandatory | The destination MAC Address in a frame to which this entry forwarding information applies. This object can take the value of a unicast address, a group address… |
| 1.3.6.1.4.1.629.1.9.1.2.1.3 | ColumnnbsMegaSwRunFilterType | read-write | mandatory | This object indicates the type of the entry and its adjacent filter. The default value is VirtualFilter(1). virtualFilter(1) - this entry was either learned by… |
| 1.3.6.1.4.1.629.1.9.1.2.1.4 | ColumnnbsMegaSwRunFilterDport | read-write | mandatory | The port to which a frame containing the entry Mac Address would be forwarded, if it is not overwritten by a Virtual Filter. This object is rellevant for virtu… |
| 1.3.6.1.4.1.629.1.9.1.2.1.5 | ColumnnbsMegaSwRunFilterSport | read-write | mandatory | A unique value that shows for which input/source port the adjacent filter/dport map should be used. At creation time this object should not be given the value … |
| 1.3.6.1.4.1.629.1.9.1.2.1.6 | ColumnnbsMegaSwRunFilterDmap | read-write | mandatory | The Destination Port Bit Map = the set of ports to which the incoming packet is to be forwarded. Each octet within the value of this object specifies a set of … |
| 1.3.6.1.4.1.629.1.9.1.3 | TablenbsMegaSwSvlanConnectTable | not-accessible | mandatory | A set of octet strings/filters showing the Virtual LANs Connectivity Matrix. A filter exists for every possible input port. Number of entries is given by nbsSy… |
| 1.3.6.1.4.1.629.1.9.1.3.1 | RownbsMegaSwSvlanConnectEntry | not-accessible | mandatory | Contains the destination filter associated with the input port nbsMegaSwSvlanConnectSport. |
| 1.3.6.1.4.1.629.1.9.1.3.1.1 | ColumnnbsMegaSwSvlanConnectSport | read-only | mandatory | A unique value that shows for which input/source port the adjacent filter/dport map should be used. |
| 1.3.6.1.4.1.629.1.9.1.3.1.2 | ColumnnbsMegaSwSvlanConnectDport | read-only | mandatory | The Destination Port Bit Map = the set of ports to which the incoming packet is to be forwarded. Each octet within the value of this object specifies a set of … |
| 1.3.6.1.4.1.629.1.9.1.4 | NodenbsMegaSwRunSvlanDb | |||
| 1.3.6.1.4.1.629.1.9.1.4.1 | ScalarnbsMegaSwRunSvlanMaxNum | read-only | mandatory | Maximum number of Security Virtual LANs that are supported |
| 1.3.6.1.4.1.629.1.9.1.4.2 | TablenbsMegaSwRunSvlanTable | not-accessible | mandatory | A list of the current Security Virtual LANs defined. Number of entries is given by nbsMegaSwRunSvlanMaxNum |
| 1.3.6.1.4.1.629.1.9.1.4.2.1 | RownbsMegaSwRunSvlanEntry | not-accessible | mandatory | Contains the descriptor of a Security Virtual LAN. |
| 1.3.6.1.4.1.629.1.9.1.4.2.1.1 | ColumnnbsMegaSwRunSvlanIndex | read-only | mandatory | The serial number of this entry in the nbsMegaSwRunSvlanTbl. It may range from 1 to the value of nbsMegaSwRunSvlanMaxNum. |
| 1.3.6.1.4.1.629.1.9.1.4.2.1.2 | ColumnnbsMegaSwRunSvlanStatus | read-write | mandatory | The object is used to create/delete entries in the nbsMegaSwRunSvlanTable table. Setting this value to invalid(2) for a certain nbsMegaSwRunSvlanIndex, deletes… |
| 1.3.6.1.4.1.629.1.9.1.4.2.1.3 | ColumnnbsMegaSwRunSvlanList | read-write | mandatory | Contains the list of the ports grouped together in this Security Virtual LAN. The representation is a bit map. Each octet within the value of this object speci… |
| 1.3.6.1.4.1.629.1.9.1.4.2.1.4 | ColumnnbsMegaSwRunSvlanIsvlanFlag | read-only | mandatory | This object indicates if this 'intra-switch' VLAN entry was added by defining an inter-switch VLAN. The entries that have this flag TRUE may not be edited usin… |
| 1.3.6.1.4.1.629.1.9.1.4.3 | ScalarnbsMegaSwRunIsvlanMaxNum | read-only | mandatory | Maximum number of InterSwitch Security Virtual LANs that are supported |
| 1.3.6.1.4.1.629.1.9.1.4.4 | TablenbsMegaSwRunIsvlanTable | not-accessible | mandatory | A list of the current InetrSwitch Security Virtual LANs defined. Number of entries is given by nbsMegaSwRunSvlanMaxNum |
| 1.3.6.1.4.1.629.1.9.1.4.4.1 | RownbsMegaSwRunIsvlanEntry | not-accessible | mandatory | Contains the descriptor of a InterSwitch Security Virtual LAN. |
| 1.3.6.1.4.1.629.1.9.1.4.4.1.1 | ColumnnbsMegaSwRunIsvlanIndex | read-only | mandatory | The serial number of this entry in the nbsMegaSwRunIsvlanTbl. It may range from 1 to the value of nbsMegaSwRunIsvlanMaxNum. |
| 1.3.6.1.4.1.629.1.9.1.4.4.1.2 | ColumnnbsMegaSwRunIsvlanStatus | read-write | mandatory | The object is used to create/delete entries in the nbsMegaSwRunIsvlanTable table. Setting this value to invalid(2) for a certain nbsMegaSwRunIsvlanIndex, delet… |
| 1.3.6.1.4.1.629.1.9.1.4.4.1.3 | ColumnnbsMegaSwRunIsvlanList | read-write | mandatory | Contains the list of the ports grouped together in this Security Virtual LAN. The representation is a bit map. Each octet within the value of this object speci… |
| 1.3.6.1.4.1.629.1.9.1.4.4.1.4 | ColumnnbsMegaSwRunIsvlanName | read-write | mandatory | Contains an optional name for the VLAN. |
| 1.3.6.1.4.1.629.1.9.1.4.4.1.5 | ColumnnbsMegaSwRunIsvlanTag | read-write | mandatory | A 12 bit Port VLAN Identifier for this Port. 0 - The Null VLAN ID.used when the Tag Header contains only user_priority information; No VLAN identifier is prese… |
| 1.3.6.1.4.1.629.1.9.1.4.4.1.6 | ColumnnbsMegaSwRunIsvlanVlanIndex | read-only | mandatory | Contains an index in the nbsMegaSwRunSvlanTable for this InterSwitch VLAN. |
| 1.3.6.1.4.1.629.1.9.1.5 | NodenbsMegaSwRunVbcDb | |||
| 1.3.6.1.4.1.629.1.9.1.5.1 | ScalarnbsMegaSwRunVbcMaxNum | read-only | mandatory | Maximum number of Virtual Broadcast Domains that are supported |
| 1.3.6.1.4.1.629.1.9.1.5.2 | TablenbsMegaSwRunVbcTable | not-accessible | mandatory | A list of the current Virtual Broadcast Domains defined. Number of entries is given by nbsMegaSwRunVbcMaxNum |
| 1.3.6.1.4.1.629.1.9.1.5.2.1 | RownbsMegaSwRunVbcEntry | not-accessible | mandatory | Contains the list of ports included in a Virtual Broadcast Domain. |
| 1.3.6.1.4.1.629.1.9.1.5.2.1.1 | ColumnnbsMegaSwRunVbcIndex | read-only | mandatory | The serial number of this entry in the nbsMegaSwRunVbcTbl. It may range from 1 to the value of nbsMegaSwRunVbcMaxNum. |
| 1.3.6.1.4.1.629.1.9.1.5.2.1.2 | ColumnnbsMegaSwRunVbcStatus | read-write | mandatory | The object is used to create/delete entries in the nbsMegaSwRunVbcTable table. Setting this value to invalid(2) for a certain nbsMegaSwRunVbcIndex, deletes thi… |
| 1.3.6.1.4.1.629.1.9.1.5.2.1.3 | ColumnnbsMegaSwRunVbcList | read-write | mandatory | Contains the list of the ports grouped together in this Virtual Broadcast Domain. The representation is a bit map. Each octet within the value of this object s… |
| 1.3.6.1.4.1.629.1.9.1.6 | NodenbsMegaSwVmon | |||
| 1.3.6.1.4.1.629.1.9.1.6.1 | ScalarnbsMegaSwVmonMonitorPort | read-write | mandatory | The port containing the Monitor Probe/Lan Analyser. Its value is in the range 1 to nbsSysPortsNumber. After system reset its value will be zero, signfying an u… |
| 1.3.6.1.4.1.629.1.9.1.6.2 | ScalarnbsMegaSwVmonMonitrdPort | read-write | mandatory | The port to be monitored. Its value is in the range 1 to nbsSysPortsNumber. After system reset its value will be zero, signfying an unitialized Virtual Monitor… |
| 1.3.6.1.4.1.629.1.9.1.6.3 | ScalarnbsMegaSwVmonStatus | read-write | mandatory | The status of the monitoring process. It allows to poll the state of the monitoring process - GET. Setting this object to startMon(3) value will start the moni… |
| 1.3.6.1.4.1.629.1.9.2 | NodenbsMegaSwPermDb | |||
| 1.3.6.1.4.1.629.1.9.2.1 | NodenbsMegaSwPermSvlanDb | |||
| 1.3.6.1.4.1.629.1.9.2.1.1 | ScalarnbsMegaSwPermSvlanMaxNum | read-only | mandatory | Maximum number of Security Virtual LANs that are supported |
| 1.3.6.1.4.1.629.1.9.2.1.2 | TablenbsMegaSwPermSvlanTable | not-accessible | mandatory | A list of the current Security Virtual LANs defined. Number of entries is given by nbsMegaSwPermSvlanMaxNum |
| 1.3.6.1.4.1.629.1.9.2.1.2.1 | RownbsMegaSwPermSvlanEntry | not-accessible | mandatory | Contains the list of ports included in a Virtual LAN. |
| 1.3.6.1.4.1.629.1.9.2.1.2.1.1 | ColumnnbsMegaSwPermSvlanIndex | read-only | mandatory | The serial number of this entry in the nbsMegaSwPermSvlanTbl. It may range from 1 to the value of nbsMegaSwPermSvlanMaxNum |
| 1.3.6.1.4.1.629.1.9.2.1.2.1.2 | ColumnnbsMegaSwPermSvlanStatus | read-write | mandatory | The object is used to create/delete entries in the nbsMegaSwPermSvlanTable table. Setting this value to invalid(2) for a certain nbsMegaSwPermSvlanIndex, delet… |
| 1.3.6.1.4.1.629.1.9.2.1.2.1.3 | ColumnnbsMegaSwPermSvlanList | read-write | mandatory | Contains the list of the ports grouped together in this Security Virtual LAN. The representation is a bit map. Each octet within the value of this object speci… |
| 1.3.6.1.4.1.629.1.9.2.1.3 | ScalarnbsMegaSwPermIsvlanMaxNum | read-only | mandatory | Maximum number of InterSwitch Security Virtual LANs that are supported |
| 1.3.6.1.4.1.629.1.9.2.1.4 | TablenbsMegaSwPermIsvlanTable | not-accessible | mandatory | A list of the current InetrSwitch Security Virtual LANs defined. Number of entries is given by nbsMegaSwPermSvlanMaxNum |
| 1.3.6.1.4.1.629.1.9.2.1.4.1 | RownbsMegaSwPermIsvlanEntry | not-accessible | mandatory | Contains the descriptor of a InterSwitch Security Virtual LAN. |
| 1.3.6.1.4.1.629.1.9.2.1.4.1.1 | ColumnnbsMegaSwPermIsvlanIndex | read-only | mandatory | The serial number of this entry in the nbsMegaSwPermIsvlanTbl. It may range from 1 to the value of nbsMegaSwPermIsvlanMaxNum. |
| 1.3.6.1.4.1.629.1.9.2.1.4.1.2 | ColumnnbsMegaSwPermIsvlanStatus | read-write | mandatory | The object is used to create/delete entries in the nbsMegaSwPermIsvlanTable table. Setting this value to invalid(2) for a certain nbsMegaSwPermIsvlanIndex, del… |
| 1.3.6.1.4.1.629.1.9.2.1.4.1.3 | ColumnnbsMegaSwPermIsvlanList | read-write | mandatory | Contains the list of the ports grouped together in this Security Virtual LAN. The representation is a bit map. Each octet within the value of this object speci… |
| 1.3.6.1.4.1.629.1.9.2.1.4.1.4 | ColumnnbsMegaSwPermIsvlanName | read-write | mandatory | Contains an optional name for the VLAN. |
| 1.3.6.1.4.1.629.1.9.2.1.4.1.5 | ColumnnbsMegaSwPermIsvlanTag | read-write | mandatory | A 12 bit Port VLAN Identifier for this Port. 0 - The Null VLAN ID.used when the Tag Header contains only user_priority information; No VLAN identifier is prese… |
| 1.3.6.1.4.1.629.1.9.2.2 | NodenbsMegaSwPermVbcDb | |||
| 1.3.6.1.4.1.629.1.9.2.2.1 | ScalarnbsMegaSwPermVbcMaxNum | read-only | mandatory | Maximum number of Virtual Broadcast Domains that are supported |
| 1.3.6.1.4.1.629.1.9.2.2.2 | TablenbsMegaSwPermVbcTable | not-accessible | mandatory | A list of the current Virtual Broadcast Domains defined. Number of entries is given by nbsMegaSwPermVbcMaxNum |
| 1.3.6.1.4.1.629.1.9.2.2.2.1 | RownbsMegaSwPermVbcEntry | not-accessible | mandatory | Contains the list of ports included in a Virtual Broadcast Domain. |
| 1.3.6.1.4.1.629.1.9.2.2.2.1.1 | ColumnnbsMegaSwPermVbcIndex | read-only | mandatory | The serial number of this entry in the nbsMegaSwPermVbcTbl. It may range from 1 to the value of nbsMegaSwPermVbcMaxNum. |
| 1.3.6.1.4.1.629.1.9.2.2.2.1.2 | ColumnnbsMegaSwPermVbcStatus | read-write | mandatory | The object is used to create/delete entries in the nbsMegaSwPermVbcTable table. Setting this value to invalid(2) for a certain nbsMegaSwPermVbcIndex, deletes t… |
| 1.3.6.1.4.1.629.1.9.2.2.2.1.3 | ColumnnbsMegaSwPermVbcList | read-write | mandatory | Contains the list of the ports grouped together in this Virtual Broadcast Domain. The representation is a bit map. Each octet within the value of this object s… |
| 1.3.6.1.4.1.629.1.9.2.3 | ScalarnbsTpPermAgingTime | read-write | mandatory | Switching Data Base Aging Time - NVRAM based. Legal values are 1 to 27000. |