NBS-SIGLANE-MIB
34 objects
Signaling Lane mib - objects for the management of multi-lane ports such as QSFP, CXP, and CFP.
Imported Objects
| IF-MIB | InterfaceIndex |
| NBS-CMMCENUM-MIB | NbsCmmcChannelBand |
| NBS-MIB | nbs NbsTcMHz NbsTcMicroAmp NbsTcMilliDb NbsTcTemperature |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629.236 | IdentitynbsSigLaneMib | Signaling Lane mib - objects for the management of multi-lane ports such as QSFP, CXP, and CFP. | ||
| 1.3.6.1.4.1.629.236.10 | IdentitynbsSigLanePortGrp | current | Ports which aggregate multiple signaling lanes | |
| 1.3.6.1.4.1.629.236.10.1 | TablenbsSigLanePortTable | not-accessible | current | A table that describes signaling lanes for a QSFP[+] or CFP port. |
| 1.3.6.1.4.1.629.236.10.1.1 | RownbsSigLanePortEntry | not-accessible | current | Contains a description of a particular port signaling lane. |
| 1.3.6.1.4.1.629.236.10.1.1.1 | ColumnnbsSigLanePortIfIndex | read-only | current | The index to the MIB-II Interface table entry which represents this port. This value should be 0 if there is no corresponding MIB-II interface entry. |
| 1.3.6.1.4.1.629.236.10.1.1.10 | ColumnnbsSigLanePortFacility | read-only | current | fiber(2) indicates that lane signaling is conducted on separate fibers. lambda(3) indicates that lane signaling is conducted on different wavelengths on a sing… |
| 1.3.6.1.4.1.629.236.10.1.1.20 | ColumnnbsSigLanePortLanes | read-only | current | The number of signaling lanes in this port |
| 1.3.6.1.4.1.629.236.20 | IdentitynbsSigLaneLaneGrp | current | Individual signaling lanes within a port | |
| 1.3.6.1.4.1.629.236.20.1 | TablenbsSigLaneLaneTable | not-accessible | current | A table that describes (fiber/lambda) network signaling lanes for a multi-lane port. |
| 1.3.6.1.4.1.629.236.20.1.1 | RownbsSigLaneLaneEntry | not-accessible | current | Contains a description of a particular (fiber/lambda) signaling lane. |
| 1.3.6.1.4.1.629.236.20.1.1.1 | ColumnnbsSigLaneLaneIfIndex | read-only | current | The index to the MIB-II Interface table entry which contains this (fiber/lambda) lane. |
| 1.3.6.1.4.1.629.236.20.1.1.2 | ColumnnbsSigLaneLaneIndex | read-only | current | Ordinal index for the signaling lane in a port: 1..4 for QSFP[+] 4 x 10G 1..4 for CFP 4 x 25G 1..4 for CFP 4 x 28G 1..10 for CFP 10 x 10G |
| 1.3.6.1.4.1.629.236.20.1.1.10 | ColumnnbsSigLaneLaneFrequency | read-only | current | The nominal frequency, in MHz. |
| 1.3.6.1.4.1.629.236.20.1.1.11 | ColumnnbsSigLaneLaneWavelengthX | read-only | current | The nominal wavelength (nanometers) is an ASCII string to be human-readable. CWDM wavelengths use 4 digits. DWDM wavelengths use seven digits and a decimal poi… |
| 1.3.6.1.4.1.629.236.20.1.1.12 | ColumnnbsSigLaneLaneChannelBand | read-only | current | The ITU grid labels DWDM channels with a letter 'band' and a numeric channel. Within this mib, the band is indicated by this object, and the channel number is … |
| 1.3.6.1.4.1.629.236.20.1.1.13 | ColumnnbsSigLaneLaneChannelNumber | read-only | current | The channel number can be derived by extracting the two middle digits from the six digit frequency in GHz. |
| 1.3.6.1.4.1.629.236.20.1.1.14 | ColumnnbsSigLaneLaneTxDisable | read-write | current | This object controls the lane's transmitter: notSupported(1), returned if transmitter not configurable, i.e. always enabled; no(2), to enable the transmitter; … |
| 1.3.6.1.4.1.629.236.20.1.1.15 | ColumnnbsSigLaneLaneFaultsCaps | read-only | current | This object specifies the supported nbsSigLaneLaneFaultsOper bit(s). A zero length OCTET STRING indicates this information is not provided. |
| 1.3.6.1.4.1.629.236.20.1.1.16 | ColumnnbsSigLaneLaneFaultsOper | read-only | current | This object provides operational lane fault conditions: The first octet provides Tx information: Bit 0: Tx LOS if set Bit 1: Tx Fault if set Bit 2: Tx LOL if s… |
| 1.3.6.1.4.1.629.236.20.1.1.20 | ColumnnbsSigLaneLaneTxPowerLevel | read-only | current | This object indicates the status of this lane's measured received power, reported in nbsSigLaneLaneTxPower: notSupported(1), if (nbsSigLaneLaneTxPower = 0x8000… |
| 1.3.6.1.4.1.629.236.20.1.1.21 | ColumnnbsSigLaneLaneTxPower | read-only | current | The output power (in milli dBm) of this lane. Not supported value: 0x80000000 |
| 1.3.6.1.4.1.629.236.20.1.1.22 | ColumnnbsSigLaneLaneTxPowerAdmin | read-write | current | The desired output power (in milli dBm) for this lane; the value should be within the supported bounds of the given pluggable. For a CFP/CFP2 supporting config… |
| 1.3.6.1.4.1.629.236.20.1.1.30 | ColumnnbsSigLaneLaneRxPowerLevel | read-only | current | This object indicates the status of this lane's measured received power, reported in nbsSigLaneLaneRxPower: notSupported(1), if (nbsSigLaneLaneRxPower = 0x8000… |
| 1.3.6.1.4.1.629.236.20.1.1.31 | ColumnnbsSigLaneLaneRxPower | read-only | current | The received optical power (in milli dBm) of this lane. Not supported value: 0x80000000 |
| 1.3.6.1.4.1.629.236.20.1.1.40 | ColumnnbsSigLaneLaneBiasAmpsLevel | read-only | current | This object indicates the status of laser bias current, as reported in nbsSigLaneLaneBiasAmps: notSupported(1), if (nbsSigLaneLaneBiasAmps = -1); lowAlarm(2), … |
| 1.3.6.1.4.1.629.236.20.1.1.41 | ColumnnbsSigLaneLaneBiasAmps | read-only | current | The bias current (in microAmps) of this lane. Not supported value: -1 |
| 1.3.6.1.4.1.629.236.20.1.1.50 | ColumnnbsSigLaneLaneLaserTempLevel | read-only | current | This object indicates the status of laser temperature, as reported in nbsSigLaneLaneLaserTemp: notSupported(1), if (nbsSigLaneLaneLaserTemp = 0x80000000); lowA… |
| 1.3.6.1.4.1.629.236.20.1.1.51 | ColumnnbsSigLaneLaneLaserTemp | read-only | current | The temperature (in degrees Celsius) of this lane. Not supported value: 0x80000000 |
| 1.3.6.1.4.1.629.236.20.1.1.60 | ColumnnbsSigLaneLaneEthTxAllOctets | read-only | current | The count of bytes in all Ethernet frames transmitted. Not supported value: 0xFFFFFFFFFFFFFFFF |
| 1.3.6.1.4.1.629.236.20.1.1.61 | ColumnnbsSigLaneLaneEthTxAllFrames | read-only | current | The count of all Ethernet frames transmitted. Not supported value: 0xFFFFFFFFFFFFFFFF |
| 1.3.6.1.4.1.629.236.20.1.1.70 | ColumnnbsSigLaneLaneEthRxAllOctets | read-only | current | The count of bytes in all Ethernet frames received. Not supported value: 0xFFFFFFFFFFFFFFFF |
| 1.3.6.1.4.1.629.236.20.1.1.71 | ColumnnbsSigLaneLaneEthRxAllFrames | read-only | current | The count of all Ethernet frames received. Not supported value: 0xFFFFFFFFFFFFFFFF |
| 1.3.6.1.4.1.629.236.100 | IdentitynbsSigLaneTraps | current | OBJECT-TYPE macros to be used in SNMP NOTIFICATION macros | |
| 1.3.6.1.4.1.629.236.100.0 | IdentitynbsSigLaneTraps0 | current | NOTIFICATION-TYPE macros |