NEC-MIB
500 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress Opaque |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-TC-v1 | DateAndTime TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.119 | Nodenec | |||
| 1.3.6.1.4.1.119.1 | NodenecProduct | |||
| 1.3.6.1.4.1.119.1.14 | Nodeatomis | |||
| 1.3.6.1.4.1.119.1.14.9 | Nodem7-phase2 | |||
| 1.3.6.1.4.1.119.1.14.12 | Nodem7-corporate | |||
| 1.3.6.1.4.1.119.2 | Nodenec-mib | |||
| 1.3.6.1.4.1.119.2.3 | NodenecProductDepend | |||
| 1.3.6.1.4.1.119.2.3.14 | Nodeatomis-mib | |||
| 1.3.6.1.4.1.119.2.3.14.9 | Nodem7-phase2-mib | |||
| 1.3.6.1.4.1.119.2.3.14.9.1 | Nodenode | |||
| 1.3.6.1.4.1.119.2.3.14.9.1.1 | NodenodeStatus | |||
| 1.3.6.1.4.1.119.2.3.14.9.1.1.1 | ScalarnodeStatusOperStatus | read-only | mandatory | Indicate operational status of the equipment. |
| 1.3.6.1.4.1.119.2.3.14.9.1.1.2 | ScalarnodeStatusStartTime | read-only | mandatory | Date and Time when the equipment was last restarted |
| 1.3.6.1.4.1.119.2.3.14.9.1.1.3 | ScalarnodeStatusNodeId | read-only | mandatory | Node ID of the equipment |
| 1.3.6.1.4.1.119.2.3.14.9.1.1.4 | ScalarnodeStatusSelfSystem | read-only | mandatory | Indicate which system of the SW-Engine the NMS is connected with. |
| 1.3.6.1.4.1.119.2.3.14.9.1.1.5 | ScalarnodeStatusSwitchType | read-only | mandatory | Indicate the type of SW-Engine. |
| 1.3.6.1.4.1.119.2.3.14.9.1.1.6 | ScalarnodeStatusFan | read-only | mandatory | Indicate operational status of the FAN of the equipment. |
| 1.3.6.1.4.1.119.2.3.14.9.1.1.7 | ScalarnodeStatusEnvironment | read-only | mandatory | Peripheral temperature environment of the equipment. If the peripheral temperature exceeds 50 C, this object enters noGood(2). |
| 1.3.6.1.4.1.119.2.3.14.9.1.2 | TablenodeStatusTable | not-accessible | mandatory | Table which indicates the status of each part of the equipment. |
| 1.3.6.1.4.1.119.2.3.14.9.1.2.1 | RownodeStatusEntry | not-accessible | mandatory | Entry of the configuration of the table. |
| 1.3.6.1.4.1.119.2.3.14.9.1.2.1.1 | ColumnnodeStatusIndex | not-accessible | mandatory | Index of the system configuration of the equipment |
| 1.3.6.1.4.1.119.2.3.14.9.1.2.1.2 | ColumnnodeStatusPower | read-only | mandatory | Indicate the status of the Power Unit of the equipment. |
| 1.3.6.1.4.1.119.2.3.14.9.1.2.1.3 | ColumnnodeStatusSwitchMode | read-only | mandatory | Indicate operational mode of SW-Engine of the equipment. |
| 1.3.6.1.4.1.119.2.3.14.9.1.2.1.4 | ColumnnodeStatusSwitch | read-only | mandatory | Indicate the status of the SW-Engine of the equipment. |
| 1.3.6.1.4.1.119.2.3.14.9.1.3 | TablenodePCMCIATable | not-accessible | mandatory | Table which indicates the status of the PCMCIA card. Every PCMCIA slot is provided with an entry. |
| 1.3.6.1.4.1.119.2.3.14.9.1.3.1 | RownodePCMCIAEntry | not-accessible | mandatory | Entry of nodePCMCIATable |
| 1.3.6.1.4.1.119.2.3.14.9.1.3.1.1 | ColumnnodePCMCIAIndex | not-accessible | mandatory | PCMCIA slot number per SW-Engine |
| 1.3.6.1.4.1.119.2.3.14.9.1.3.1.2 | ColumnnodePCMCIAStatus | read-only | mandatory | Status of PCMCIA card |
| 1.3.6.1.4.1.119.2.3.14.9.1.3.1.3 | ColumnnodePCMCIAType | read-only | mandatory | Type of installed PCMCIA card |
| 1.3.6.1.4.1.119.2.3.14.9.1.4 | NodenodeOpe | |||
| 1.3.6.1.4.1.119.2.3.14.9.1.4.1 | ScalarnodeOpeSave | read-write | mandatory | Save processing. Save System Configuration information in FROM. The result is indicated in nodeOpeSaveResult. The value at read is always noOperation (1). |
| 1.3.6.1.4.1.119.2.3.14.9.1.4.2 | ScalarnodeOpeSaveResult | read-only | mandatory | The result of SAVE processing OK/NG indicate that SAVE processing completed/failed, respectively. (NearEND) indicates that the number of write counts approache… |
| 1.3.6.1.4.1.119.2.3.14.9.1.4.3 | ScalarnodeOpeCopy | read-write | mandatory | Copy the system configuration information/LM to the FROM of other system. The result is indicated in nodeOpeCopyResult. The value at read is always noOperation… |
| 1.3.6.1.4.1.119.2.3.14.9.1.4.4 | ScalarnodeOpeCopyResult | read-only | mandatory | Result of the copy processing. |
| 1.3.6.1.4.1.119.2.3.14.9.1.4.5 | ScalarnodeOpeReset | read-write | mandatory | System Reset processing The value at read is always noOperation(1). |
| 1.3.6.1.4.1.119.2.3.14.9.2 | Nodeslot | |||
| 1.3.6.1.4.1.119.2.3.14.9.2.1 | TableslotIfConfTable | not-accessible | mandatory | Table which indicates the line card configuration of the equipment |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1 | RowslotIfConfEntry | not-accessible | mandatory | Entry of the line card configuration |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.1 | ColumnslotIfConfIndex | read-only | mandatory | Index of line card configuration |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.2 | ColumnslotIfConfPhysType | read-only | mandatory | PMD layer/physical layer format of the line card. Above stated [oc3c], [oc12c] are ATM Form conformed names. They are corresponding to the ITU-T conformed name… |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.3 | ColumnslotIfConfRev | read-only | mandatory | The revision of the line cards. JpnToEng[�ѥå�����̤��������,0 length.] |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.4 | ColumnslotIfConfStatus | read-only | mandatory | Operational status of the line cards. |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.5 | ColumnslotIfConfBufferType | read-only | mandatory | The Buffer ID of the line cards. |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.6 | ColumnslotIfConfBufferRev | read-only | mandatory | The revision of the line card's buffers. JpnToEng[�ѥå�����̤��������,0 length.] |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.7 | ColumnslotIfConfReset | read-write | mandatory | Line card reset. The result of the reset order is indicated in slotIfConfResetResult. JpnToEng[PKG̤�������ʳ����ɤ߹��߻����… |
| 1.3.6.1.4.1.119.2.3.14.9.2.1.1.8 | ColumnslotIfConfResetResult | read-only | mandatory | The current result of the reset order by slotIfConfReset. |
| 1.3.6.1.4.1.119.2.3.14.9.3 | Nodelinf | |||
| 1.3.6.1.4.1.119.2.3.14.9.3.1 | TablelinfStatusTable | not-accessible | mandatory | Table related to the ATM specific lines which could not be defined by MIB-II. The table includes the configuration information, operational status and error ty… |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1 | RowlinfStatusEntry | not-accessible | mandatory | Entry of the line interface status indication. |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.1 | ColumnlinfIndex | read-only | mandatory | Index of the line interface status indication |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.2 | ColumnlinfStatus | read-only | mandatory | Status of the line interface or the receive clock |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.3 | ColumnlinfLoopBack | read-write | mandatory | Loop back status |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.4 | ColumnlinfConf | read-only | mandatory | Line card type. |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.5 | ColumnlinfFwdAvailableBandWidth | read-only | mandatory | Forward Available BandWidth(Mbps). JpnToEng[PKG̤��������,0] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.6 | ColumnlinfBkwdAvailableBandWidth | read-only | mandatory | Backward Available BandWidth(Mbps). JpnToEng[PKG̤��������,0] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.7 | ColumnlinfJ2Rate | not-accessible | mandatory | Indicate the line rate of the J2-dedicated line service. |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.8 | ColumnlinfCacFactor | read-write | mandatory | JpnToEng(���Ԥ���7��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.9 | ColumnlinfLoopBackCause | read-only | mandatory | JpnToEng[ʪ���롼�ץХå���������.] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.10 | ColumnlinfBandWidth | read-only | mandatory | BandWidth[cell/s].JpnToEng[̵���ޤ���PKG̤���������� 0.] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.11 | ColumnlinfRecommendation | read-only | mandatory | JpnToEng[�����] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.12 | ColumnlinfUnassignedIdle | read-only | mandatory | Unassigned/Idle |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.13 | ColumnlinfMaxActiveVpiBits | read-only | mandatory | The length of valid VPI bits.JpnToEng[PKG̤��������0.] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.14 | ColumnlinfMaxActiveVciBits | read-only | mandatory | The length of valid VCI bits.JpnToEng[PKG̤��������0.] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.15 | ColumnlinfPhysType | read-only | mandatory | JpnToEng[���β�����°���륹���åȤ� slotIfConfPhysType ��] |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.16 | ColumnlinfParam1 | read-only | mandatory | JpnToEng(���Σ���ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.17 | ColumnlinfParam2 | read-only | mandatory | JpnToEng(���Σ���ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.18 | ColumnlinfParam3 | read-only | mandatory | JpnToEng(���Σ���ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.19 | ColumnlinfParam4 | read-only | mandatory | JpnToEng(���Σ���ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.20 | ColumnlinfParam5 | read-only | mandatory | JpnToEng(���Σ���ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.21 | ColumnlinfParam6 | read-only | mandatory | JpnToEng(���Σ���ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.1.1.22 | ColumnlinfParam7 | read-only | mandatory | JpnToEng(���Σ���ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.3.2 | TablelinfFifoConfTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1 | RowlinfFifoConfEntry | not-accessible | mandatory | Entry of FIFO status indication |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1.1 | ColumnlinfFifoConfifIndex | not-accessible | mandatory | Line Interface Index |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1.2 | ColumnlinfFifoConfIndex | not-accessible | mandatory | Index of FIFO |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1.3 | ColumnlinfFifoConfStatus | not-accessible | mandatory | Status of FIFO |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1.4 | ColumnlinfFifoConfPeekRate | not-accessible | mandatory | Peak Cell rate (PCR) for shaper-line card. |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1.5 | ColumnlinfFifoConfSustainRate | not-accessible | mandatory | Sustainable Cell Rate ( SCR) for shaper-line card. |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1.6 | ColumnlinfFifoConfMaxBurstSize | not-accessible | mandatory | Maximum Burst Size (MBS) for the shaper-line card. |
| 1.3.6.1.4.1.119.2.3.14.9.3.2.1.7 | ColumnlinfFifoConfRowStatus | not-accessible | mandatory | This object is used to designate the setting method for the shaping rate from the manager. Also, this object returns the reply to the shaping rate setting requ… |
| 1.3.6.1.4.1.119.2.3.14.9.4 | Nodeconn | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.1 | NodeconnPvc | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1 | NodeconnPvcOpe | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.1 | ScalarconnPvcOpeLowPort | read-write | mandatory | Low-side line port number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.2 | ScalarconnPvcOpeLowVpi | read-write | mandatory | Low-side VPI number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.3 | ScalarconnPvcOpeLowVci | read-write | mandatory | Low-side VCI number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.4 | ScalarconnPvcOpeHighPort | read-write | mandatory | High-side line port number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.5 | ScalarconnPvcOpeHighVpi | read-write | mandatory | High-side VPI number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.6 | ScalarconnPvcOpeHighVci | read-write | mandatory | High-side VCI number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.7 | ScalarconnPvcOpeTopology | read-write | mandatory | Topology of the Connection. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.8 | ScalarconnPvcOpeTrafficType | read-write | mandatory | Traffic Type. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.9 | ScalarconnPvcOpeStatus | read-write | mandatory | JpnToEng[PVC����/����������Ԥʤ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.10 | ScalarconnPvcOpeCause | read-only | mandatory | The result of the connection operation. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.11 | ScalarconnPvcOpeLowFifoIndex | read-write | mandatory | Shaper number of Forward. If shaping is not performed, designate 0. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.12 | ScalarconnPvcOpeHighFifoIndex | read-write | mandatory | Shaper number of Backward. If shaping is not performed, designate 0. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.13 | ScalarconnPvcOpeLowParam1 | read-write | mandatory | UPC mode of Forward. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.14 | ScalarconnPvcOpeHighParam1 | read-write | mandatory | UPC mode of Backward. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.15 | ScalarconnPvcOpeLowParam2 | read-write | mandatory | Profile name of Forward. If nothing is designated, the string of size(0) is designated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.1.16 | ScalarconnPvcOpeHighParam2 | read-write | mandatory | Profile name of Backward. If nothing is designated, the string of size(0) is designated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2 | TableconnPvcTable | not-accessible | mandatory | JpnToEng(���Σ���ʬ��) |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1 | RowconnPvcEntry | not-accessible | mandatory | Entry of connPvcTable. e.g. receive + =======>| (1/0/32)| |(2/0/32) =======>| (1/0/33)| |(2/0/33) =======>| (1/0/34)| | |(2/0/34) | + | |(3/0/34) + (line/vpi/v… |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.1 | ColumnconnPvcPort | not-accessible | mandatory | Line port number |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.2 | ColumnconnPvcVpi | not-accessible | mandatory | VPI number |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.3 | ColumnconnPvcVci | not-accessible | mandatory | VCI number |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.4 | ColumnconnPvcDirection | not-accessible | mandatory | Indicate cell flow. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.5 | ColumnconnPvcIndex | not-accessible | mandatory | JpnToEng[�����å��󥰤��륨��ɥݥ���Ȥ� ���̤��륤��ǥå���.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.6 | ColumnconnPvcContrastPort | read-only | mandatory | JpnToEng[�����å��󥰤��륨��ɥݥ���Ȥβ����ֹ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.7 | ColumnconnPvcContrastVpi | read-only | mandatory | JpnToEng[�����å��󥰤��륨��ɥݥ���Ȥ�VPI�ֹ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.8 | ColumnconnPvcContrastVci | read-only | mandatory | JpnToEng[�����å��󥰤��륨��ɥݥ���Ȥ�VCI�ֹ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.9 | ColumnconnPvcTopology | read-only | mandatory | Topology of the Connection. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.10 | ColumnconnPvcTrafficType | read-only | mandatory | Traffic Type. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.11 | ColumnconnPvcFifoIndex | read-only | mandatory | The Shaper numbers of the direction from this endpoint to the endpoint to be switched. Value 0 means that Shaping will not be performed. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.12 | ColumnconnPvcContrastFifoIndex | read-only | mandatory | The Shaper number of the direction from the endpoint to be switched to this end point. Value 0 means that Shaping will not be performed. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.13 | ColumnconnPvcTrfConf | read-write | mandatory | Indicate Traffic control/status. If a path does not exist, noSuchName. 1. Indicate Traffic status 1) entry...registered 2) remove...not registered(initial stat… |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.14 | ColumnconnPvcTrfResult | read-only | mandatory | Indicate the processing result after Traffic control. If the path does not exist, noSuchName. The result of the registration EntrySucceed (2) AlreadyEntry (3) … |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.15 | ColumnconnPvcParam1 | read-only | mandatory | UPC mode of the direction from this endpoint to the endpoint to be switched. If nothing is designated, or the designation is invalid, off (1) is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.16 | ColumnconnPvcContrastParam1 | read-only | mandatory | UPC mode of the direction from the endpoint to be switched to this end point. If nothing is designated, or the designation is invalid, off (1) is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.17 | ColumnconnPvcParam2 | read-only | mandatory | Profile name of the direction from this endpoint to the endpoint to be switched. If nothing is designated, or the designation is invalid, the string of size(0)… |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.18 | ColumnconnPvcContrastParam2 | read-only | mandatory | Profile name of the direction from the endpoint to be switched to this end point. If nothing is designated, or the designation is invalid, the string of size(0… |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.19 | ColumnconnPvcParam3 | read-only | mandatory | PCR[cell/s] of the direction from this endpoint to the endpoint to be switched. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.20 | ColumnconnPvcContrastParam3 | read-only | mandatory | PCR[cell/s] of the direction from the endpoint to be switched to this end point. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.21 | ColumnconnPvcParam4 | read-only | mandatory | SCR[cell/s] of the direction from this endpoint to the endpoint to be switched. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.22 | ColumnconnPvcContrastParam4 | read-only | mandatory | SCR[cell/s] of the direction from the endpoint to be switched to this end point. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.23 | ColumnconnPvcParam5 | read-only | mandatory | MBS[cell] of the direction from this endpoint to the endpoint to be switched. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.24 | ColumnconnPvcContrastParam5 | read-only | mandatory | MBS[cell] of the direction from the endpoint to be switched to this end point. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.25 | ColumnconnPvcParam6 | read-only | mandatory | EPD(Early Packet Discard) of the direction from this endpoint to the endpoint to be switched. Indicate if the discard processing in the unit of AAL5 packet sho… |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.26 | ColumnconnPvcContrastParam6 | read-only | mandatory | EPD(Early Packet Discard) of the direction from the endpoint to be switched to this end point. Indicate if the discard processing in the unit of AAL5 packet sh… |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.27 | ColumnconnPvcParam7 | not-accessible | mandatory | MCR[cell/s]. Not supported here. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.2.1.28 | ColumnconnPvcContrastParam7 | not-accessible | mandatory | MCR[cell/s]. Not supported here. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3 | TableconnPvcTrfTable | not-accessible | mandatory | Indicate traffic counter information per connection. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3.1 | RowconnPvcTrfEntry | not-accessible | mandatory | Entry of traffic per connection. Every INDEX is equivalent to the one defined in connPvcEntry. |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3.1.1 | ColumnconnPvcTrfInCells | read-only | mandatory | The number of receive cells 64 bit counter |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3.1.2 | ColumnconnPvcTrfInCellsCounters | read-only | mandatory | The number of receive cells 32 bit counter |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3.1.3 | ColumnconnPvcTrfOutCells | read-only | mandatory | The number of transmit cells 64 bit counter |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3.1.4 | ColumnconnPvcTrfOutCellsCounters | read-only | mandatory | The number of transmit cells 32 bit counter |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3.1.5 | ColumnconnPvcTrfInDropCells | read-only | mandatory | The number of receive drop cells 64 bit counter |
| 1.3.6.1.4.1.119.2.3.14.9.4.1.3.1.6 | ColumnconnPvcTrfInDropCellsCounters | read-only | mandatory | The number of receive drop cells 32 bit counter |
| 1.3.6.1.4.1.119.2.3.14.9.4.2 | NodeconnConf | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1 | NodeconnConfNode | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1.1 | ScalarconnConfNodePvcs | read-only | mandatory | The number of current established PVCs in this switch. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1.2 | ScalarconnConfNodeSvcs | read-only | mandatory | The number of current established SVCs in this switch. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1.3 | ScalarconnConfNodeSoftPvcs | read-only | mandatory | The number of current established Soft PVPCs/PVCCs in this switch. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1.4 | ScalarconnConfNodeTrafClear | read-write | mandatory | Set allClear (1) to clear all traffic registration information. If noOperation (2) is written, nothing will be performed. The value at read is always noOperati… |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1.5 | ScalarconnConfNodeTrafs | read-only | mandatory | The number of traffic registrations which are being set in the switch. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1.6 | ScalarconnConfNodeCompleteSvcs | read-only | mandatory | The number of SVC complete calls |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.1.7 | ScalarconnConfNodeUnCompleteSvcs | read-only | mandatory | The number of SVC incomplete calls |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.2 | TableconnConfIfTable | not-accessible | mandatory | The table is used to show the information of current established connections on the interface. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.2.1 | RowconnConfIfEntry | not-accessible | mandatory | Entry of connConfIfTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.2.1.1 | ColumnconnConfIfPvcs | read-only | mandatory | The number of current established PVCs on the interface. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.2.1.2 | ColumnconnConfIfSvcs | read-only | mandatory | The number of current established SVCs on the interface. |
| 1.3.6.1.4.1.119.2.3.14.9.4.2.2.1.3 | ColumnconnConfIfSoftPvcs | read-only | mandatory | The number of current established Soft PVPCs/PVCCs on the interface. |
| 1.3.6.1.4.1.119.2.3.14.9.4.3 | NodeconnRoute | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1 | NodeconnRouteOpe | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.1 | ScalarconnRouteOpeStatus | read-write | mandatory | allocate : allocate the right to operate the routing information to a manager. add : add the routing information to static routing table. delete : delete the r… |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.2 | ScalarconnRouteOpeFailureCause | read-only | mandatory | The result of the operation. |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.3 | ScalarconnRouteOpeAddressFormat | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.4 | ScalarconnRouteOpeAddressLength | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.5 | ScalarconnRouteOpeAddress | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.6 | ScalarconnRouteOpePrimaryIfIndex | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.7 | ScalarconnRouteOpePrimaryVPI | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.8 | ScalarconnRouteOpeSecondaryIfIndex | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.9 | ScalarconnRouteOpeSecondaryVPI | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.10 | ScalarconnRouteOpeTertiaryIfIndex | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.11 | ScalarconnRouteOpeTertiaryVPI | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.12 | ScalarconnRouteOpeFourthryIfIndex | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.13 | ScalarconnRouteOpeFourthryVPI | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.14 | ScalarconnRouteOpeFifthryIfIndex | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.15 | ScalarconnRouteOpeFifthryVPI | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.16 | ScalarconnRouteOpeSixthryIfIndex | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.17 | ScalarconnRouteOpeSixthryVPI | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.18 | ScalarconnRouteOpeSeventhryIfIndex | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.1.19 | ScalarconnRouteOpeSeventhryVPI | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2 | TableconnRouteTable | not-accessible | mandatory | This table is used to show the static routing table for SVC. |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1 | RowconnRouteEntry | not-accessible | mandatory | Entry of connRouteTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.1 | ColumnconnRouteType | read-only | mandatory | The value of this object shows the routing type. |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.2 | ColumnconnRoutePrimaryIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.3 | ColumnconnRoutePrimaryVPI | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.4 | ColumnconnRouteSecondaryIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.5 | ColumnconnRouteSecondaryVPI | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.6 | ColumnconnRouteTertiaryIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.7 | ColumnconnRouteTertiaryVPI | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.8 | ColumnconnRouteFourthryIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.9 | ColumnconnRouteFourthryVPI | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.10 | ColumnconnRouteFifthryIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.11 | ColumnconnRouteFifthryVPI | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.12 | ColumnconnRouteSixthryIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.13 | ColumnconnRouteSixthryVPI | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.14 | ColumnconnRouteSeventhryIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.15 | ColumnconnRouteSeventhryVPI | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.16 | ColumnconnRoutePrimaryStatus | read-only | mandatory | Operational status of the primary routing. If the primary route of the routing table of the equipment is valid, enable(2), if not valid, disable(1). |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.17 | ColumnconnRoutePrimaryCause | read-only | mandatory | Cause of the switching from the primary route. |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.18 | ColumnconnRouteAtmAddressFormat | not-accessible | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.19 | ColumnconnRouteAtmAddressLength | not-accessible | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.3.2.1.20 | ColumnconnRouteAtmAddress | not-accessible | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.4 | ScalarconnSoftPvcIndexNext | read-only | mandatory | This object returns the empty index of the call management table, required to access to connSoftPvcTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5 | TableconnSoftPvcTable | not-accessible | mandatory | This table include all entries to Soft-PVPC/PVCC currently available between the lines or the line and CPU port of the switch. Also, this table is used to set … |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1 | RowconnSoftPvcEntry | not-accessible | mandatory | Entry of ATMSoft-PVPC/PVCC connection |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.1 | ColumnconnSoftPvcIndex | read-only | mandatory | The value of this object is equal to the connSoftPvcIndexNext. 1 - 128 : Soft PVPCs/PVCCs |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.2 | ColumnconnSoftPvcTopology | read-write | mandatory | Topology of the Connection. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.3 | ColumnconnSoftPvcTrafficType | read-write | mandatory | Traffic Type. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.4 | ColumnconnSoftPvcEndpointType | read-only | mandatory | Type of Endpoint. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.5 | ColumnconnSoftPvcRetry | read-write | mandatory | Number of retry. 0 - 15 : Number of retry -1 : Infinite retry |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.6 | ColumnconnSoftPvcSrcAtmAddressFormat | read-write | mandatory | AtmAdress format. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.7 | ColumnconnSoftPvcSrcAtmAddressLength | read-write | mandatory | The valid bit length of connSoftPvcSrcAtmAddress. The value(-1) is read-only. The value(4..160) must be a multiple of 4. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.8 | ColumnconnSoftPvcSrcAtmAddress | read-write | mandatory | NodeId of source node. Its maximum length is 13 bytes. This object length is 20 bytes in case AtmAddress is setting. If the last semi OCTET is invalid, it is p… |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.9 | ColumnconnSoftPvcSrcIfIndex | read-write | mandatory | The number of the calling line. (ifIndex of ifEntry) |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.10 | ColumnconnSoftPvcSrcVPI | read-write | mandatory | VPI value of the calling line. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.11 | ColumnconnSoftPvcSrcVCI | read-write | mandatory | VCI value of the calling line. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.12 | ColumnconnSoftPvcDstAtmAddressFormat | read-write | mandatory | AtmAdress format. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.13 | ColumnconnSoftPvcDstAtmAddressLength | read-write | mandatory | The valid bit length of connSoftPvcDstAtmAddress. The value(-1) is read-only. The value(4..160) must be a multiple of 4. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.14 | ColumnconnSoftPvcDstAtmAddress | read-write | mandatory | NodeId of destination node. Its maximum length is 13 bytes. This object length is 20 bytes in case AtmAddress is setting. If the last semi OCTET is invalid, it… |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.15 | ColumnconnSoftPvcDstIfIndex | read-write | mandatory | The number of the called line. (ifIndex of ifEntry)65 is GateWay. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.16 | ColumnconnSoftPvcDstVPI | read-write | mandatory | VPI value of the called line. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.17 | ColumnconnSoftPvcDstVCI | read-write | mandatory | VCI value of the called line. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.18 | ColumnconnSoftPvcRowStatus | read-write | mandatory | It is used from the manager to order the setting method of the Soft PVC connection. It is used from the agent side to return the result of the connection setti… |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.19 | ColumnconnSoftPvcCause | read-only | mandatory | Object to indicate the result of the connection setting. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.20 | ColumnconnSoftPvcRestRetry | read-only | mandatory | Remaining number of retry 0 - 15 : Remaining number of retry -1 : Infinite retry in progress |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.21 | ColumnconnSoftPvcSrcFifoIndex | read-write | mandatory | Designate the Shaper number of the calling line. If the Shaping is not performed, designate 0. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.22 | ColumnconnSoftPvcDstFifoIndex | read-write | mandatory | Designate the Shaper number of the called line. If the Shaping is not performed, designate 0. However, if the called sw is not furnished with the shaping funct… |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.23 | ColumnconnSoftPvcNodeKind | read-write | mandatory | Designate/indicate the machine type on the called side. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.24 | ColumnconnSoftPvcSrcParam1 | read-write | mandatory | UPC mode of the calling line. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.25 | ColumnconnSoftPvcDstParam1 | read-write | mandatory | UPC mode of the called line. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.26 | ColumnconnSoftPvcSrcParam2 | read-write | mandatory | Profile name of Forward. If nothing is designated, the string of size(0) is designated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.27 | ColumnconnSoftPvcDstParam2 | read-write | mandatory | Profile name of Backward. If nothing is designated, the string of size(0) is designated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.28 | ColumnconnSoftPvcSrcParam3 | read-only | mandatory | PCR[cell/s] of Forward. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.29 | ColumnconnSoftPvcDstParam3 | read-only | mandatory | PCR[cell/s] of Backward. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.30 | ColumnconnSoftPvcSrcParam4 | read-only | mandatory | SCR[cell/s] of Forward. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.31 | ColumnconnSoftPvcDstParam4 | read-only | mandatory | SCR[cell/s] of Backward. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.32 | ColumnconnSoftPvcSrcParam5 | read-only | mandatory | MBS[cell] of Forward. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.33 | ColumnconnSoftPvcDstParam5 | read-only | mandatory | MBS[cell] of Backward. If the value is invalid, -1 is indicated. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.34 | ColumnconnSoftPvcSrcParam6 | read-only | mandatory | EPD(Early Packet Discard) of Forward. Indicate if the discard processing in the unit of AAL5 packet should be performed or not when the threshold is exceeded. … |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.35 | ColumnconnSoftPvcDstParam6 | read-only | mandatory | EPD(Early Packet Discard) of Backward. Indicate if the discard processing in the unit of AAL5 packet should be performed or not when the threshold is exceeded.… |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.36 | ColumnconnSoftPvcSrcParam7 | not-accessible | mandatory | MCR[cell/s]. Not supported here. |
| 1.3.6.1.4.1.119.2.3.14.9.4.5.1.37 | ColumnconnSoftPvcDstParam7 | not-accessible | mandatory | MCR[cell/s]. Not supported here. |
| 1.3.6.1.4.1.119.2.3.14.9.4.6 | TableconnSoftPvcEstablishedSrcInfTable | not-accessible | mandatory | The table regarding the calling node of the Soft PVPC/PVCC established as called side office by the local node |
| 1.3.6.1.4.1.119.2.3.14.9.4.6.1 | RowconnSoftPvcEstablishedSrcInfEntry | not-accessible | mandatory | The entry of the calling side node information of the Soft PVPC/PVCC established as the called side office by the local node |
| 1.3.6.1.4.1.119.2.3.14.9.4.6.1.1 | ColumnconnSoftPvcEstablishedSrcInf | read-only | mandatory | The calling node information of the Soft PVPC/PVCC established as called side office by the node. The structure of the entry is as follows struct { long SrcAtm… |
| 1.3.6.1.4.1.119.2.3.14.9.4.6.1.2 | ColumnconnSoftPvcEstSrcInfIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.7 | NodeconnOam | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1 | NodeconnOamOpe | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.1 | ScalarconnOamOpeStatus | read-write | mandatory | Used to set/delete OAM End-point, Connecting-point. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.2 | ScalarconnOamOpeCause | read-only | mandatory | The result of the processing to set/delete OAM End-point, Connecting-point. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.3 | ScalarconnOamOpePoint | read-write | mandatory | End-point / Connecting-point. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.4 | ScalarconnOamOpeMode | read-write | mandatory | Mode. F4 (VP level)/f5 (VC level) |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.5 | ScalarconnOamOpeSection | read-write | mandatory | Point between segments/End-to-End point. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.6 | ScalarconnOamOpePort1 | read-write | mandatory | Line number |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.7 | ScalarconnOamOpePort2 | read-write | mandatory | Line number. Upon setting/deleting end-point, don't care about it. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.8 | ScalarconnOamOpeVpi1 | read-write | mandatory | VPI. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.9 | ScalarconnOamOpeVpi2 | read-write | mandatory | VPI. Upon setting/deleting end-point, don't care about it. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.10 | ScalarconnOamOpeVci1 | read-write | mandatory | VCI. JpnToEng[f4 ��٥� ������/������� Don't care.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.1.11 | ScalarconnOamOpeVci2 | read-write | mandatory | VCI. JpnToEng[End-point �ޤ��� f4 ��٥� ������/������� Don't care.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2 | TableconnOamTable | not-accessible | mandatory | OAM End-point, Connecting-point indication table |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1 | RowconnOamEntry | not-accessible | mandatory | OAM End-point, Connecting-point indication entry |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.1 | ColumnconnOamPort | not-accessible | mandatory | Line number |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.2 | ColumnconnOamIndex | not-accessible | mandatory | OAM End-point / Connecting-point Index. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.3 | ColumnconnOamContrastPort | read-only | mandatory | Line number of the opposite line. For End-point, -1. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.4 | ColumnconnOamVpi | read-only | mandatory | VPI. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.5 | ColumnconnOamContrastVpi | read-only | mandatory | Opposite VPI. For End-point, -1. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.6 | ColumnconnOamVci | read-only | mandatory | VCI. For the f4 level, -1. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.7 | ColumnconnOamContrastVci | read-only | mandatory | Opposite VCI. JpnToEng[End-point �ޤ��� f4��٥�ξ��� -1.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.8 | ColumnconnOamPoint | read-only | mandatory | End-point / Connecting-point. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.9 | ColumnconnOamMode | read-only | mandatory | Mode. F4 (VP level)/f5 (VC level). |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.10 | ColumnconnOamSection | read-only | mandatory | Point between segments/End-to-End point. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.11 | ColumnconnOamStatus | read-only | mandatory | Receive status of end-point. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.12 | ColumnconnOamDefectType | read-only | mandatory | Fault cause in the receive cell. For Connecting-point, return 'normal (1)'. |
| 1.3.6.1.4.1.119.2.3.14.9.4.7.2.1.13 | ColumnconnOamDefectNodeID | read-only | mandatory | Node ID of the Switch which sends alarm transfer cells. For connecting-point, return '0 length string'. |
| 1.3.6.1.4.1.119.2.3.14.9.4.8 | NodeconnLoop | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1 | NodeconnLoopOpe | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.1 | ScalarconnLoopOpeStatus | read-write | mandatory | JpnToEng[�롼�ץХå�������.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.2 | ScalarconnLoopOpeCause | read-only | mandatory | JpnToEng[�롼�ץХå���η��.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.3 | ScalarconnLoopOpeMode | read-write | mandatory | F4 (VP level)/f5 (VC level). |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.4 | ScalarconnLoopOpeBase | read-write | mandatory | JpnToEng[�ƥ��ȥ١����Υե���.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.5 | ScalarconnLoopOpeLoopBackPointNodeId | read-write | mandatory | JpnToEng[�롼�ץХå�������ޤ��֤� Switch �� LoopBackID.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.6 | ScalarconnLoopOpeCorrelationTag | read-write | mandatory | JpnToEng[������������ȼ������������ �б��դ��뤿��ξ���.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.7 | ScalarconnLoopOpeCount | read-write | mandatory | JpnToEng[�롼�ץХå���μ»ܲ��.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.8 | ScalarconnLoopOpePort | read-write | mandatory | JpnToEng[���и��β����ֹ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.9 | ScalarconnLoopOpeVpi | read-write | mandatory | JpnToEng[����� VPI.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.10 | ScalarconnLoopOpeVci | read-write | mandatory | JpnToEng[���и��� VCI. f4 (VP��٥�) �Ǥν������� Don't care �Ȥ���.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.11 | ScalarconnLoopOpeNormalEndCount | read-only | mandatory | JpnToEng[�롼�ץХå�����ｪλ���.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.12 | ScalarconnLoopOpeAbnormalEndCount | read-only | mandatory | JpnToEng[�롼�ץХå���۾ｪλ���.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.13 | ScalarconnLoopOpeAbortCount | read-only | mandatory | JpnToEng[�롼�ץХå�����Dz��.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.8.1.14 | ScalarconnLoopOpeLoopBackPointIdLength | read-write | mandatory | JpnToEng[�롼�ץХå�������ޤ��֤� Switch �� LoopBack Location ID �����ϥ�����(bitĹ).������,4�ӥ… |
| 1.3.6.1.4.1.119.2.3.14.9.4.9 | NodeconnProfile | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.9.1 | ScalarconnProfileIndexNext | read-only | mandatory | Shows the empty index value of connProfileTable(including row of notReady, notInService). If the number of profiles reaches the registration limit, 0. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2 | TableconnProfileTable | not-accessible | mandatory | Table to set/indicate the profile. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1 | RowconnProfileEntry | not-accessible | mandatory | Entry of connProfileTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.1 | ColumnconnProfileIndex | not-accessible | mandatory | Index value of connProfileTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.2 | ColumnconnProfileRowStatus | read-write | mandatory | Used to control rows of the table. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.3 | ColumnconnProfileCause | read-only | mandatory | The result of Profile setting processing. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.4 | ColumnconnProfileTrafficType | read-write | mandatory | Traffic Type. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.5 | ColumnconnProfileName | read-write | mandatory | Profile name. Available characters: alphanumeric characters 0 length string is only read. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.6 | ColumnconnProfileParam1 | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.7 | ColumnconnProfileParam2 | read-write | mandatory | For ph1/2-buffer, Sustainable cell rate [cell/sec]. Only nrt-VBR, and rt-VBR are valid. If it is invalid, -1. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.8 | ColumnconnProfileParam3 | read-write | mandatory | For ph1/2-buffer, Maximum burst size [cell]. Only nrt-VBR, and rt-VBR are valid. If it is invalid, -1. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.2.1.9 | ColumnconnProfileParam4 | read-write | mandatory | For ph1/2-buffer, EPD function flag. If it is other than ABR, UBR, off, only. |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.3 | ScalarconnProfileName2Index | read-write | mandatory | Equivalent to connProfileName |
| 1.3.6.1.4.1.119.2.3.14.9.4.9.4 | ScalarconnProfileName2IndexResult | read-only | mandatory | Shows the index of the row whose connProfileRowStatus in connProfileTable, corresponding to connProfileName2Index, is active. If the corresponding row does not… |
| 1.3.6.1.4.1.119.2.3.14.9.4.10 | TableconnSvcTable | not-accessible | mandatory | JpnToEng[�����֤����ꤵ��� SVC ����Υơ��֥�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.10.1 | RowconnSvcEntry | not-accessible | mandatory | JpnToEng[�����֤����ꤵ��� SVC ����Υ���ȥ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.10.1.1 | ColumnconnSvcIndex | not-accessible | mandatory | JpnToEng[SVC ����� Index.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.10.1.2 | ColumnconnSvcInf | read-only | mandatory | JpnToEng(���Σ�������ʬ��) |
| 1.3.6.1.4.1.119.2.3.14.9.4.11 | NodeconnCe | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1 | NodeconnCeVc | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1 | TableconnCeVcTable | not-accessible | mandatory | JpnToEng[CES�����ɤ����ꤵ�줿CEVC�ξ���ɽ����Ԥʤ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1 | RowconnCeVcEntry | not-accessible | mandatory | JpnToEng[�����֤����ꤵ������Ƥ�CEVC�Υ���ȥ꡼.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.1 | ColumnconnCeVcPort | not-accessible | mandatory | Line number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.2 | ColumnconnCeVcVci | not-accessible | mandatory | VCI value. JpnToEng[���Ѳ�ǽ�ϰ̤�linfStatusTable ����.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.3 | ColumnconnCeVcRowStatus | read-write | mandatory | Used to control rows of the table. |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.4 | ColumnconnCeVcCause | read-only | mandatory | The result of CEVC setting processing. |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.5 | ColumnconnCeVcDirection | read-write | mandatory | JpnToEng[��������] |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.6 | ColumnconnCeVcUpPartialFillSize | read-write | mandatory | JpnToEng[UP�����Υ�����������������줿ʿ�ѥ桼�������ƥåȿ� 0 �ξ��� full ����(s… |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.7 | ColumnconnCeVcDownPartialFillSize | read-write | mandatory | JpnToEng[DOWN�����Υ�����������������줿ʿ�ѥ桼�������ƥåȿ� 0 �ξ��� full ����… |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.8 | ColumnconnCeVcCondition | read-write | mandatory | Condtion date. |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.9 | ColumnconnCeVcCDVT | read-write | mandatory | CDVT value. JpnToEng[pkg���̤ˤ��CDVT�ϰ�] + |pkg type| str mode |CDVT range| unit of | | | | | setting | =======================================… |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.10 | ColumnconnCeVcUpPCR | read-only | mandatory | JpnToEng[CEVC�������UP������PCR��.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.11 | ColumnconnCeVcDownPCR | read-only | mandatory | JpnToEng[CEVC�������DOWN������PCR��.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.12 | ColumnconnCeVcUpTimeSlot1 | read-write | mandatory | JpnToEng(���Σ�����ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.13 | ColumnconnCeVcDownTimeSlot1 | read-write | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.14 | ColumnconnCeVcUpTimeSlot2 | read-write | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.15 | ColumnconnCeVcDownTimeSlot2 | read-write | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.16 | ColumnconnCeVcUpTimeSlot3 | read-write | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.11.1.1.1.17 | ColumnconnCeVcDownTimeSlot3 | read-write | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.12 | NodeconnFr | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1 | NodeconnFrDlci | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1 | TableconnFrDlciTable | not-accessible | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1 | RowconnFrDlciEntry | not-accessible | mandatory | Entry of connFrDlciTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.1 | ColumnconnFrDlciPort | not-accessible | mandatory | Line number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.2 | ColumnconnFrDlciIndex | not-accessible | mandatory | DLCI number. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.3 | ColumnconnFrDlciRowStatus | read-write | mandatory | Used to control rows of the table. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.4 | ColumnconnFrDlciCause | read-only | mandatory | JpnToEng[���ͥ������(DLCI) ����ǡ��� ��������η��.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.5 | ColumnconnFrDlciFrProfile | read-write | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.6 | ColumnconnFrDlciPCR | read-only | mandatory | Peak Cell Rate[cell/sec]. JpnToEng[row��active�Ǥʤ������ͤ� -1(�ǥե������).] |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.7 | ColumnconnFrDlciSCR | read-only | mandatory | Sustainable Cell Rate[cell/sec]. JpnToEng[row��active�Ǥʤ������ͤ� -1(�ǥե������).] |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.1.1.1.8 | ColumnconnFrDlciMBS | read-only | mandatory | Maximum Burst Size[cell]. JpnToEng[row��active�Ǥʤ������ͤ� -1(�ǥե������).] |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2 | NodeconnFrProfile | |||
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.1 | ScalarconnFrProfileIndexNext | read-only | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2 | TableconnFrProfileTable | not-accessible | mandatory | JpnToEng[Frprofile ������ / ɽ����Ԥʤ�����Υơ��֥�.] |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1 | RowconnFrProfileEntry | not-accessible | mandatory | Entry of connFrProfileTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.1 | ColumnconnFrProfileIndex | not-accessible | mandatory | Index of connFrProfileTable. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.2 | ColumnconnFrProfileRowStatus | read-write | mandatory | Used to control rows of the table. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.3 | ColumnconnFrProfileCause | read-only | mandatory | The result of Frprofile setting processing. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.4 | ColumnconnFrProfileName | read-write | mandatory | Frprofile name. Available characters: alphanumeric characters 0 length string is only read. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.5 | ColumnconnFrProfileInterworkingType | read-write | mandatory | Interworking Type |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.6 | ColumnconnFrProfileCIR | read-write | mandatory | CIR value. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.7 | ColumnconnFrProfileDEtoCLP | read-write | mandatory | DE to CLP mapping mode |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.8 | ColumnconnFrProfileCLPValue | read-write | mandatory | CLP Value. It's valid when connFrProfileDEtoCLP is mode2. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.9 | ColumnconnFrProfileCLPtoDE | read-write | mandatory | CLP to DE mapping mode. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.10 | ColumnconnFrProfileDEValue | read-write | mandatory | DE Value. It's valid when connFrProfileInterworkingType is service and connFrProfileCLPtoDE is mode2. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.11 | ColumnconnFrProfileCapsulationMode | read-write | mandatory | Protocol encapsulation mode. It's valid when connFrProfileInterworkingType is service. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.2.1.12 | ColumnconnFrProfileCongestionMode | read-write | mandatory | Congestion indication(Forward) mode. It's valid when connFrProfileInterworkingType is service. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.3 | ScalarconnFrProfileName2Index | read-write | mandatory | Equivalent to connProfileName. |
| 1.3.6.1.4.1.119.2.3.14.9.4.12.2.4 | ScalarconnFrProfileName2IndexResult | read-only | mandatory | Shows the index of the row whose connFrProfileRowStatus in connFrProfileTable, corresponding to connFrProfileName2Index, is active. If the corresponding row do… |
| 1.3.6.1.4.1.119.2.3.14.9.5 | Nodeperf | |||
| 1.3.6.1.4.1.119.2.3.14.9.5.1 | ScalarperfTrapEnable | read-write | mandatory | This object is used for disabling/enabling trap messages regarding the enterprise specific traps. |
| 1.3.6.1.4.1.119.2.3.14.9.5.2 | TableperfIfTable | not-accessible | mandatory | Table for showing the result of the performance monitoring per line of the equipment. Up to 64 tables are available for entry. Every line whose traffic is mana… |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1 | RowperfIfEntry | not-accessible | mandatory | Entry of the line performance monitoring. |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.1 | ColumnperfIfIndex | not-accessible | mandatory | Line number. |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.2 | ColumnperfIfReceivedCells | read-only | mandatory | The Number of the receive cells of line port. (64 bit applicable) |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.3 | ColumnperfIfReceivedCellsCounters | read-only | mandatory | The Number of the receive cells of line port. (32 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.4 | ColumnperfIfTransmittedCells | read-only | mandatory | The Number of the transmit cells of line port. (64 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.5 | ColumnperfIfTransmittedCellsCounters | read-only | mandatory | The Number of the transmit cells of line port. (32 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.8 | ColumnperfIfMisDelivdCells | read-only | mandatory | The Number of the undefined cells of line port. (64 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.9 | ColumnperfIfMisDelivdCellsCounters | read-only | mandatory | The Number of the undefined cells of line port. (32 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.10 | ColumnperfIfThresholdExcessCells | read-only | mandatory | Number of the threshold excess cells (64 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.11 | ColumnperfIfThresholdExcessCellsCounters | read-only | mandatory | Number of the threshold excess cells (32 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.12 | ColumnperfIfUpcErrorCells | read-only | mandatory | Number of the UPC error cells (64 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.2.1.13 | ColumnperfIfUpcErrorCellsCounters | read-only | mandatory | Number of the UPC error cells (32 bit applicable). |
| 1.3.6.1.4.1.119.2.3.14.9.5.3 | TableperfIfSlotTable | not-accessible | mandatory | Table for showing the number of cells of the traffic and performance per line card of the equipment. Up to 16 tables are available for entry. Every line whose … |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1 | RowperfIfSlotEntry | not-accessible | mandatory | Entry of traffic/performance per line card. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.1 | ColumnperfIfSlotReceivedCells | read-only | mandatory | The number of receive cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.2 | ColumnperfIfSlotTransmittedCells | read-only | mandatory | The number of transmit cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.3 | ColumnperfIfSlotInDropCells | read-only | mandatory | The number of receive drop cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.5 | ColumnperfIfSlotReceivedCellsCounters | read-only | mandatory | The number of receive cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.6 | ColumnperfIfSlotTransmittedCellsCounters | read-only | mandatory | The number of transmit cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.7 | ColumnperfIfSlotInDropCellsCounters | read-only | mandatory | The number of receive drop cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.9 | ColumnperfIfSlotHCThresholdExcessCells | read-only | mandatory | The number of threshold excess cells |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.10 | ColumnperfIfSlotThresholdExcessCells | read-only | mandatory | The number of threshold excess cells |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.11 | ColumnperfIfSlotHCUpcErrorCells | read-only | mandatory | Number of UPC error cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.3.1.12 | ColumnperfIfSlotUpcErrorCells | read-only | mandatory | Number of UPC error cells. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4 | TableperfIfPhysTable | not-accessible | mandatory | JpnToEng[ʪ���إѥե����ޥ󥹥�˥��򼨤��ơ��֥�.] |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1 | RowperfIfPhysEntry | not-accessible | mandatory | JpnToEng[ʪ���إѥե����ޥ󥹥�˥��Υ���ȥ�.] |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.1 | ColumnperfIfPhysPort | not-accessible | mandatory | Line number. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.2 | ColumnperfIfPhysHCHecErorrs | read-only | mandatory | Number of HEC error cells(64 bit applicable). On the line card other than OC12, J2 and PR-1.5M, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.3 | ColumnperfIfPhysHecErorrs | read-only | mandatory | Number of HEC error cells(32 bit applicable). On the line card other than OC12, J2 and PR-1.5M, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.4 | ColumnperfIfPhysHCHecDropCells | read-only | mandatory | Number of uncorrectable HEC error cells(64 bit applicable). On the line card other than OC3, OC12, OC12PMC, J2, PR-1.5, DS3, E3, DS1 and E1, the value of this … |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.5 | ColumnperfIfPhysHecDropCells | read-only | mandatory | Number of uncorrectable HEC error cells(32 bit applicable). On the line card other than OC3, OC12, OC12PMC, J2, PR-1.5, DS3, E3, DS1 and E1, the value of this … |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.6 | ColumnperfIfPhysHCB1Errors | read-only | mandatory | Number of B1 errors(64 bit applicable). On the line card other than OC3, OC12, OC12PMC, DS3, E3, DS1 and E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.7 | ColumnperfIfPhysB1Errors | read-only | mandatory | Number of B1 errors(32 bit applicable). On the line card other than OC3, OC12, OC12PMC, DS3, E3, DS1 and E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.8 | ColumnperfIfPhysHCB2Errors | read-only | mandatory | Number of B2 errors(64 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.9 | ColumnperfIfPhysB2Errors | read-only | mandatory | Number of B2 errors(32 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.10 | ColumnperfIfPhysHCB3Errors | read-only | mandatory | Number of B3 errors(64 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.11 | ColumnperfIfPhysB3Errors | read-only | mandatory | Number of B3 errors(32 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.12 | ColumnperfIfPhysHCPathFEBEs | read-only | mandatory | Number of Path FEBEs(64 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.13 | ColumnperfIfPhysPathFEBEs | read-only | mandatory | Number of Path FEBEs(32 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.14 | ColumnperfIfPhysHCLineFEBEs | read-only | mandatory | Number of Line (Section) FEBEs(64 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.15 | ColumnperfIfPhysLineFEBEs | read-only | mandatory | Number of Line (Section) FEBEs(32 bit applicable). On the line card other than OC3, OC12 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.16 | ColumnperfIfPhysHCFramingErrors | read-only | mandatory | Number of Framing errors(64 bit applicable). On the line card other than DS1, E1, DS3 and E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.17 | ColumnperfIfPhysFramingErrors | read-only | mandatory | Number of Framing errors(32 bit applicable). On the line card other than DS1, E1, DS3 and E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.18 | ColumnperfIfPhysHCReceivedCells | read-only | mandatory | The Number of the receive cells(64 bit applicable). On the line card other than DS3, E3 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.19 | ColumnperfIfPhysReceivedCells | read-only | mandatory | The Number of the receive cells(32 bit applicable). On the line card other than DS3, E3 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.20 | ColumnperfIfPhysHCTransmittedCells | read-only | mandatory | The Number of the transmit cells(64 bit applicable). On the line card other than DS3, E3 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.21 | ColumnperfIfPhysTransmittedCells | read-only | mandatory | The Number of the transmit cells(32 bit applicable). On the line card other than DS3, E3 and OC12PMC, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.22 | ColumnperfIfPhysHCIdelUnassignedCells | read-only | mandatory | The Number of Idle/Unassigned cells(64 bit applicable). On the line card other than DS3 and E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.23 | ColumnperfIfPhysIdelUnassignedCells | read-only | mandatory | The Number of Idle/Unassigned cells(32 bit applicable). On the line card other than DS3 and E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.24 | ColumnperfIfPhysHCFEBEErrors | read-only | mandatory | Number of FEBE errors(64 bit applicable). On the line card other than DS3, E3, DS1 and E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.25 | ColumnperfIfPhysFEBEErrors | read-only | mandatory | Number of FEBEs errors(32 bit applicable). On the line card other than DS3, E3, DS1 and E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.26 | ColumnperfIfPhysHCFEBEs | read-only | mandatory | Number of FEBEs(64 bit applicable). On the line card other than DS3, E3, E1 and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.27 | ColumnperfIfPhysFEBEs | read-only | mandatory | Number of FEBEs(32 bit applicable). On the line card other than DS3, E3, E1 and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.28 | ColumnperfIfPhysHCPathParityErrors | read-only | mandatory | Number of path parity errors(64 bit applicable). On the line card other than DS3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.29 | ColumnperfIfPhysPathParityErrors | read-only | mandatory | Number of path parity errors(32 bit applicable). On the line card other than DS3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.30 | ColumnperfIfPhysHCParityErrors | read-only | mandatory | Number of parity errors(64 bit applicable). On the line card other than DS3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.31 | ColumnperfIfPhysParityErrors | read-only | mandatory | Number of parity errors(32 bit applicable). On the line card other than DS3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.32 | ColumnperfIfPhysHCSEZs | read-only | mandatory | Number of detections of Summed excessive Zero (64 bit applicable). On the line card other than DS3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.33 | ColumnperfIfPhysSEZs | read-only | mandatory | Number of detections of Summed excessive Zero (32 bit applicable). On the line card other than DS3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.34 | ColumnperfIfPhysHCBitErrors | read-only | mandatory | Number of Bit errors(64 bit applicable). On the line card other than DS3 and CE-DS1(SF mode), the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.35 | ColumnperfIfPhysBitErrors | read-only | mandatory | Number of Bit errors(32 bit applicable). On the line card other than DS3 and CE-DS1(SF mode), the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.36 | ColumnperfIfPhysHCLcvErrors | read-only | mandatory | Number of LCV errors(64 bit applicable). On the line card other than DS3, E3, DS1, E1, FR-E1, CE-DS1, FR-DS1 and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.37 | ColumnperfIfPhysLcvErrors | read-only | mandatory | Number of LCV errors(32 bit applicable). On the line card other than DS3, E3, DS1, E1, FR-E1, CE-DS1, FR-DS1 and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.38 | ColumnperfIfPhysHCBip8Errors | read-only | mandatory | Number of BIP-8 errors(64 bit applicable). On the line card other than E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.39 | ColumnperfIfPhysBip8Errors | read-only | mandatory | Number of BIP-8 errors(32 bit applicable). On the line card other than E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.40 | ColumnperfIfPhysHCIecErrors | read-only | mandatory | Number of IEC errors(64 bit applicable). On the line card other than E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.41 | ColumnperfIfPhysIecErrors | read-only | mandatory | Number of IEC errors(32 bit applicable). On the line card other than E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.42 | ColumnperfIfPhysHCFramingPatternErrors | read-only | mandatory | Number of Framing pattern errors(64 bit applicable). On the line card other than E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.43 | ColumnperfIfPhysFramingPatternErrors | read-only | mandatory | Number of Framing pattern errors(32 bit applicable). On the line card other than E3, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.44 | ColumnperfIfPhysHCFramingBitErrors | read-only | mandatory | Number of Framing bit errors(64 bit applicable). On the line card other than DS1, E1, FR-E1, CE-DS1, FR-DS1 and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.45 | ColumnperfIfPhysFramingBitErrors | read-only | mandatory | Number of Framing bit errors(32 bit applicable). On the line card other than DS1, E1, FR-E1, CE-DS1, FR-DS1 and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.46 | ColumnperfIfPhysHCCrcErrors | read-only | mandatory | Number of CRC errors(64 bit applicable). On the line card other than DS1, E1, FR-E1, FR-DS1, CE-DS1(ESF mode) and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.5.4.1.47 | ColumnperfIfPhysCrcErrors | read-only | mandatory | Number of CRC errors(32 bit applicable). On the line card other than DS1, E1, FR-E1, FR-DS1, CE-DS1(ESF mode) and CE-E1, the value of this object is 0. |
| 1.3.6.1.4.1.119.2.3.14.9.6 | Nodescale | |||
| 1.3.6.1.4.1.119.2.3.14.9.6.1 | ScalarscaleStatus | read-write | mandatory | Order to execute and state. |
| 1.3.6.1.4.1.119.2.3.14.9.6.2 | ScalarscaleCause | read-only | mandatory | The result of execution. |
| 1.3.6.1.4.1.119.2.3.14.9.6.3 | ScalarscaleDataType | read-write | mandatory | Data type. |
| 1.3.6.1.4.1.119.2.3.14.9.6.4 | ScalarscaleTarget | read-write | mandatory | IP address of the target. |
| 1.3.6.1.4.1.119.2.3.14.9.6.5 | ScalarscaleFileName | read-write | mandatory | File name(up to 127 characters). |
| 1.3.6.1.4.1.119.2.3.14.9.6.6 | ScalarscaleSwSide | read-write | mandatory | Indicate which system of the SW-Engine. |
| 1.3.6.1.4.1.119.2.3.14.9.7 | Nodecard | |||
| 1.3.6.1.4.1.119.2.3.14.9.7.1 | TablecardStatusTable | not-accessible | mandatory | Table showing the configuration information of the line card with CPU. |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1 | RowcardStatusEntry | not-accessible | mandatory | Entry of the configuration nformation of the line card with CPU. |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1.1 | ColumncardStatusServerType | read-only | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1.2 | ColumncardStatusRevision | read-only | mandatory | The revision of the software installed in the line card with CPU. e.g., ...X means the number of revision. Software Version X.X(X) Boot ROM Version KXX |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1.3 | ColumncardStatusMateSlotNumber | read-only | mandatory | The slot number of the card with double configuration (including itself). If it is single configuration/although it is of double configuration, SBY system is n… |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1.4 | ColumncardStatusMode | read-only | mandatory | Operational mode of the card. |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1.5 | ColumncardStatusPriority | read-only | mandatory | JpnToEng(����1��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1.6 | ColumncardStatusAtmAddr | read-only | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.7.1.1.7 | ColumncardStatusMateAtmAddr | read-only | mandatory | JpnToEng(����2��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.7.2 | TablecardOpeTable | not-accessible | mandatory | The table showing the command operations to the line card with CPU. If the card configured on SBY system is indicated, return noSuchName. |
| 1.3.6.1.4.1.119.2.3.14.9.7.2.1 | RowcardOpeEntry | not-accessible | mandatory | Entry of command operation to the line card with CPU. |
| 1.3.6.1.4.1.119.2.3.14.9.7.2.1.1 | ColumncardOpeReset | read-write | mandatory | |
| 1.3.6.1.4.1.119.2.3.14.9.7.2.1.2 | ColumncardOpeDiagnosis | not-accessible | mandatory | Card diagnostic processing. Diagnose the SBY system card of double configuration with (the ACT system card). Return noOperation (1) at read. JpnToEng[��⡼… |
| 1.3.6.1.4.1.119.2.3.14.9.7.2.1.3 | ColumncardOpeSave | read-write | mandatory | Card Save processing. Save the system configuration information in FROM. If it is of double configuration, save it in SBY system FROM as well. Return noOperati… |
| 1.3.6.1.4.1.119.2.3.14.9.7.2.1.4 | ColumncardOpeSaveResult | read-only | mandatory | The result of card save processing. OK /NG indicate that SAVE processing completed/failed, respectively. (NearEND) indicates that the number of writes into FRO… |
| 1.3.6.1.4.1.119.2.3.14.9.7.2.1.5 | ColumncardOpeCopy | read-write | mandatory | Card Copy processing. Return noOperation (1) at read. |
| 1.3.6.1.4.1.119.2.3.14.9.7.2.1.6 | ColumncardOpeCopyResult | read-only | mandatory | Result of Card Copy processing. |
| 1.3.6.1.4.1.119.2.3.14.9.8 | Nodeclock | |||
| 1.3.6.1.4.1.119.2.3.14.9.8.1 | NodeclockOpe | |||
| 1.3.6.1.4.1.119.2.3.14.9.8.1.1 | ScalarclockOpeStatus | read-write | mandatory | Used to control Clock setting processing. |
| 1.3.6.1.4.1.119.2.3.14.9.8.1.2 | ScalarclockOpeCause | read-only | mandatory | Result of Clock setting processing. |
| 1.3.6.1.4.1.119.2.3.14.9.8.1.3 | ScalarclockOpeMode | read-write | mandatory | Clock Mode. |
| 1.3.6.1.4.1.119.2.3.14.9.8.1.4 | ScalarclockOpeAccuracy | read-write | mandatory | Accuracy[ppm] of clock. JpnToEng[(SLAVE�⡼��������Τ�Í��)] If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.1.5 | ScalarclockOpeSlaveLine1 | read-write | mandatory | Slave line number 1. JpnToEng[(SLAVE�⡼��������Τ�Í��)] If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.1.6 | ScalarclockOpeSlaveLine2 | read-write | mandatory | Slave line number 2. JpnToEng[(SLAVE�⡼��������Τ�Í��)] Slave line number 1 shall be set already. If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.1.7 | ScalarclockOpeSlaveLine3 | read-write | mandatory | Slave line number 3. JpnToEng[(SLAVE�⡼��������Τ�Í��)] Slave line number 1~2 shall be set already. If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.1.8 | ScalarclockOpeSlaveLine4 | read-write | mandatory | Slave line number 4. JpnToEng[(SLAVE�⡼��������Τ�Í��)] Slave line number 1~3 shall be set already. If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.2 | ScalarclockMode | read-only | mandatory | Clock Mode. |
| 1.3.6.1.4.1.119.2.3.14.9.8.3 | ScalarclockAccuracy | read-only | mandatory | Accuracy[ppm] of clock. |
| 1.3.6.1.4.1.119.2.3.14.9.8.4 | ScalarclockSlaveLine | read-only | mandatory | The number of the actually slaved line. If mode is master (1), it is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.5 | ScalarclockSlaveLine1 | read-only | mandatory | Slave line number 1. If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.6 | ScalarclockSlaveLine1Status | read-only | mandatory | State of slave line 1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.7 | ScalarclockSlaveLine2 | read-only | mandatory | Slave line number 2. If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.8 | ScalarclockSlaveLine2Status | read-only | mandatory | State of slave line 2. |
| 1.3.6.1.4.1.119.2.3.14.9.8.9 | ScalarclockSlaveLine3 | read-only | mandatory | Slave line number 3. If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.10 | ScalarclockSlaveLine3Status | read-only | mandatory | State of slave line 3. |
| 1.3.6.1.4.1.119.2.3.14.9.8.11 | ScalarclockSlaveLine4 | read-only | mandatory | Slave line number 4. If no set, value is -1. |
| 1.3.6.1.4.1.119.2.3.14.9.8.12 | ScalarclockSlaveLine4Status | read-only | mandatory | State of slave line 4. |
| 1.3.6.1.4.1.119.2.3.14.9.9 | Nodediag | |||
| 1.3.6.1.4.1.119.2.3.14.9.9.1 | ScalardiagActionStatus | read-write | mandatory | Used to control diagnostics test processing. |
| 1.3.6.1.4.1.119.2.3.14.9.9.2 | ScalardiagActionKind | read-write | mandatory | JpnToEng(���Σ���ʬ��) |
| 1.3.6.1.4.1.119.2.3.14.9.9.3 | ScalardiagPreCause | read-only | mandatory | JpnToEng[���ǽ����¹����Υѥ�᡼�������å��η��.] |
| 1.3.6.1.4.1.119.2.3.14.9.9.4 | ScalardiagCause | read-only | mandatory | Result of diagnostics test processing. |
| 1.3.6.1.4.1.119.2.3.14.9.9.5 | ScalardiagParam1 | read-write | mandatory | JpnToEng[���Σ���ʬ] |
| 1.3.6.1.4.1.119.2.3.14.9.10 | Nodepnni | |||
| 1.3.6.1.4.1.119.2.3.14.9.10.1 | NodepnniNode | |||
| 1.3.6.1.4.1.119.2.3.14.9.10.1.1 | NodepnniNodeOpe | |||
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2 | TablepnniNodeTable | not-accessible | mandatory | Table of PNNI Logical node attributes. A row exist every PNNI peer group which the managed system belongs to. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1 | RowpnniNodeEntry | not-accessible | mandatory | Entry of pnniNodeTable. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1.1 | ColumnpnniNodeLevel | not-accessible | mandatory | PNNI hierarchy level where node(s) reside. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1.2 | ColumnpnniNodeId | read-only | mandatory | Node ID. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1.3 | ColumnpnniNodeAtmAddress | read-only | mandatory | ATM End System Address of node. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1.4 | ColumnpnniNodePeerGroupId | read-only | mandatory | Peer Group Identifier of the peer group which a node belongs to. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1.5 | ColumnpnniNodeRestrictedTransit | read-only | mandatory | Restrict a node to be used as a transit route. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1.6 | ColumnpnniNodeRestrictedBranching | read-only | mandatory | Restrict a node to be used as a branch point of point-to-multipoint. |
| 1.3.6.1.4.1.119.2.3.14.9.10.1.2.1.7 | ColumnpnniNodeLeadershipPriority | read-only | mandatory | Leadership priority which a node notifies of. |
| 1.3.6.1.4.1.119.2.3.14.9.11 | NodematCmd | |||
| 1.3.6.1.4.1.119.2.3.14.9.11.1 | ScalarmatCmdStatus | read-write | mandatory | JpnToEng(����5��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.11.2 | ScalarmatCmdInput | read-write | mandatory | JpnToEng(����1��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.11.3 | ScalarmatCmdOutput | read-only | mandatory | JpnToEng(����1��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.11.4 | ScalarmatCmdOutputType | read-only | mandatory | JpnToEng(����4��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.9.11.5 | ScalarmatCmdStop | read-write | mandatory | When the value is set to 'stop', the MAT command is stopped. When the value is set to 'noOperation', no operation is performed. When read, the value 'noOperati… |
| 1.3.6.1.4.1.119.2.3.14.9.11.6 | ScalarmatCmdTimeOut | read-write | mandatory | JpnToEng(����1��ʬ) |
| 1.3.6.1.4.1.119.2.3.14.12 | Nodem7-corporate-mib |