MIB Viewer

NETAPP-MIB

3209 objects
The mib module for NetApp SNMPv2 entities
Imported Objects
HCNUM-TCCounterBasedGauge64 ZeroBasedCounter64
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIBEGIN IMPORTS MODULE-IDENTITY Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress mib-2 NOTIFICATION-TYPE OBJECT-TYPE snmpModules TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString PhysAddress TestAndIncr TEXTUAL-CONVENTION TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.4.1.789Nodenetapp
1.3.6.1.4.1.789.0Nodenetapp0
1.3.6.1.4.1.789.0.2NotificationuserDefinedcurrentA polling-style trap built using the 'snmp traps' command on the filer.
1.3.6.1.4.1.789.0.6NotificationdhmNoticeDegradedIOcurrentDisk Health Monitor - Reported a Disk Degraded-I/O Event
1.3.6.1.4.1.789.0.7NotificationdhmNoticePFAEventcurrentDisk Health Monitor - Reported a Disk Predictive-Failure Event
1.3.6.1.4.1.789.0.11NotificationemergencyTrapcurrentA user-defined trap indicating an extremely urgent situation, usually indicating that the system has failed and is shutting down.
1.3.6.1.4.1.789.0.12NotificationalertTrapcurrentA user-defined trap indicating a condition that should be corrected immediately, such as a failed disk.
1.3.6.1.4.1.789.0.13NotificationcriticalTrapcurrentA user-defined trap indicating a critical condition, such as a hard device error.
1.3.6.1.4.1.789.0.14NotificationerrorTrapcurrentA user-defined trap indicating an error condition, such as a mistake in a configuration file.
1.3.6.1.4.1.789.0.15NotificationwarningTrapcurrentA user-defined trap indicating a condition which is not an error, but which may require special handling.
1.3.6.1.4.1.789.0.16NotificationnotificationTrapcurrentA user-defined trap meant to provide notification, such as an hourly uptime message.
1.3.6.1.4.1.789.0.17NotificationinformationalTrapcurrentA user-defined trap used for informational purposes.
1.3.6.1.4.1.789.0.18NotificationdbgTrapcurrentA user-defined trap used for debugging purposes. This trap was previously mis-documented as being trap number 17, with the name debugTrap. It has always, actua…
1.3.6.1.4.1.789.0.21NotificationdiskFailedShutdowncurrentSystem is shutting down because the system has been running in degraded mode for 24 hours. The trap includes a string describing the failed disk.
1.3.6.1.4.1.789.0.22NotificationdiskFailedcurrentOne or more disks failed. The trap includes a string describing the failed disk(s).
1.3.6.1.4.1.789.0.26NotificationdiskRepairedcurrentThe failed disks have been repaired. This trap is a placeholder - it is not currently sent by Data ONTAP.
1.3.6.1.4.1.789.0.31NotificationfanFailureShutdowncurrentCritical chassis or cpu fans have failed and the system is shutting down.
1.3.6.1.4.1.789.0.33NotificationfanFailedcurrentOne or more chassis fans failed. The trap includes a string describing the failed fan(s).
1.3.6.1.4.1.789.0.35NotificationfanWarningcurrentOne or more chassis or cpu fans are in warning state. The trap includes a string describing the fan(s) in the warning state.
1.3.6.1.4.1.789.0.36NotificationfanRepairedcurrentAll fans are repaired.
1.3.6.1.4.1.789.0.41NotificationpowerSupplyFailureShutdowncurrentCritical power supplies or power rails failed and the system is shutting down.
1.3.6.1.4.1.789.0.43NotificationpowerSupplyFailedcurrentOne or more redundant power supplies failed. Include in the trap a string describing the failed power supply(ies).
1.3.6.1.4.1.789.0.45NotificationpowerSupplyWarningcurrentOne or more power supplies or power rails in warning state. Include in the trap a string describing the power supply(ies) or the power rail(s) in the warning s…
1.3.6.1.4.1.789.0.46NotificationpowerSupplyRepairedcurrentPreviously-failed power supplies or power rails have been repaired.
1.3.6.1.4.1.789.0.55NotificationcpuTooBusycurrentCPU utilization exceeds 90%. This trap is not enabled by default. To enable this trap set the registry entry options.monitor.cpu.enable to on. Note that as the…
1.3.6.1.4.1.789.0.56NotificationcpuOkcurrentCPU utilization has dropped back below 90%.
1.3.6.1.4.1.789.0.62NotificationnvramBatteryDischargedcurrentThe NVRAM battery is fully discharged.
1.3.6.1.4.1.789.0.63NotificationnvramBatteryLowcurrentThe charge in the NVRAM battery is low.
1.3.6.1.4.1.789.0.72NotificationclusterNodeFailedcurrentA node in a Cluster FailOver configuration failed. Its partner will assume service for the failed node.
1.3.6.1.4.1.789.0.75NotificationclusterNodeTakenOvercurrentThe partner has taken over for a failed cluster node.
1.3.6.1.4.1.789.0.76NotificationclusterNodeRepairedcurrentA cluster node has resumed operation.
1.3.6.1.4.1.789.0.77NotificationclusterNodeRepairingcurrentA cluster node has rebooted, and a giveback has started.
1.3.6.1.4.1.789.0.82NotificationvolumeFullcurrentAt least one volume is more than 98% full. The string sent with the trap gives the name of the volume or volumes which exceed the volumeFull or volumeNearlyFul…
1.3.6.1.4.1.789.0.85NotificationvolumeNearlyFullcurrentAt least one volume is more than 95% full. The string sent with the trap gives the name of the volume or volumes which exceed the volumeFull or volumeNearlyFul…
1.3.6.1.4.1.789.0.86NotificationvolumeRepairedcurrentAll volumes are now under 95% full.
1.3.6.1.4.1.789.0.87NotificationvolumesStillFullcurrentAt least one volume that was full or nearly full is now OK, but more volumes still exceed the volumeNearlyFull or volumeFull thresholds. This trap is generally…
1.3.6.1.4.1.789.0.91NotificationoverTempShutdowncurrentSystem temperature is too high to continue operating. The system is shutting down.
1.3.6.1.4.1.789.0.95NotificationoverTempcurrentSystem temperature is too high and in the warning level.
1.3.6.1.4.1.789.0.96NotificationoverTempRepairedcurrentSystem temperature has returned to an acceptable value.
1.3.6.1.4.1.789.0.103NotificationshelfFaultcurrentA disk storage shelf reported a fault, probably due to a problem with drive placement, fans, power, or temperature.
1.3.6.1.4.1.789.0.105NotificationshelfWarningcurrentA disk storage shelf reported a warning, probably due to a problem with drive placement, fans, power, or temperature.
1.3.6.1.4.1.789.0.106NotificationshelfRepairedcurrentA previously-reported shelf fault is now corrected.
1.3.6.1.4.1.789.0.111NotificationglobalStatusNonRecoverablecurrentThe appliance's overall status changed to 'nonRecoverable', indicating a problem so severe that the appliance is shutting down.
1.3.6.1.4.1.789.0.113NotificationglobalStatusCriticalcurrentThe appliance's overall status changed to 'critical', indicating a problem that needs immediate attention.
1.3.6.1.4.1.789.0.115NotificationglobalStatusNonCriticalcurrentThe appliance's overall status changed to 'nonCritical', indicating a problem that needs attention.
1.3.6.1.4.1.789.0.116NotificationglobalStatusOkcurrentThe appliance's overall status returned to normal.
1.3.6.1.4.1.789.0.126NotificationsoftQuotaExceededcurrentA user has exceeded their soft quota limit.
1.3.6.1.4.1.789.0.127NotificationsoftQuotaNormalcurrentA user is safely back under their soft quota limit.
1.3.6.1.4.1.789.0.134NotificationautosupportSendErrorcurrentUnable to send auto support. The trap includes a string describing the reason for the failure.
1.3.6.1.4.1.789.0.135NotificationautosupportConfigurationErrordeprecatedAuto support may be configured incorrectly. The trap includes a string describing the mis-configuration.
1.3.6.1.4.1.789.0.136NotificationautosupportSentcurrentAuto support was sent successfully.
1.3.6.1.4.1.789.0.142NotificationupsLinePowerOffdeprecatedUPS: Input line power has failed and UPS is now on battery.
1.3.6.1.4.1.789.0.143NotificationupsBatteryCriticaldeprecatedUPS: Battery is nearly exhausted, starting graceful shutdown.
1.3.6.1.4.1.789.0.144NotificationupsShuttingDowndeprecatedUPS: Shutting down now: Time left on battery is exhausted.
1.3.6.1.4.1.789.0.145NotificationupsBatteryWarningdeprecatedUPS: Warning: Time left on battery is getting critical.
1.3.6.1.4.1.789.0.146NotificationupsLinePowerRestoredcurrentUPS: Input line power has been restored and UPS is now off battery.
1.3.6.1.4.1.789.0.151NotificationappEmergencycurrentThe application encountered an extremely urgent situation and requires an immediate response.
1.3.6.1.4.1.789.0.152NotificationappAlertcurrentThe application is in a condition that should be corrected immediately.
1.3.6.1.4.1.789.0.153NotificationappCriticalcurrentThe application encountered a critical condition.
1.3.6.1.4.1.789.0.154NotificationappErrorcurrentThe application encountered an error condition.
1.3.6.1.4.1.789.0.155NotificationappWarningcurrentThe application is in a condition which is not an error, but which may require special handling.
1.3.6.1.4.1.789.0.156NotificationappNoticecurrentThe application is notifying of a certain event.
1.3.6.1.4.1.789.0.157NotificationappInfocurrentThe application's message is meant for informational purposes.
1.3.6.1.4.1.789.0.158NotificationappTrapcurrentThe application requires to be debugged.
1.3.6.1.4.1.789.0.162NotificationalfFilewrapcurrentThe internal audit file has wrapped. You are currently losing event records. Warning the user.
1.3.6.1.4.1.789.0.166NotificationalfFileSavedcurrentThe internal audit log has been auto saved to an external evt file. Notifying the user.
1.3.6.1.4.1.789.0.167NotificationalfFileNearlyFullcurrentThe internal audit log file is nearly full. The file is going to wrap. Notifying the user.
1.3.6.1.4.1.789.0.176NotificationquotaExceededcurrentOne of the quota limits has been exceeded. The trap includes a string describing the specific event which triggered the trap. The string is structured in the f…
1.3.6.1.4.1.789.0.177NotificationquotaNormalcurrentOne of the quota limits has gone back down to a normal level. The trap includes a string describing the specific event which triggered the trap. The string is …
1.3.6.1.4.1.789.0.187NotificationwaflDirFullcurrentThe directory has been filled to its limit
1.3.6.1.4.1.789.0.192NotificationeccSummarycurrentMemory ECC: number of new correctable ECC errors
1.3.6.1.4.1.789.0.195NotificationeccMaskedcurrentMemory ECC: High frequency of ECC errors
1.3.6.1.4.1.789.0.204NotificationftpdErrorcurrentFtp daemon: service stopped
1.3.6.1.4.1.789.0.206NotificationftpdMaxConnNoticecurrentFtp daemon: number of connections hits maximum number
1.3.6.1.4.1.789.0.216NotificationftpdMaxConnThresholdNoticecurrentFtp daemon: number of connections nearly hits maximum number
1.3.6.1.4.1.789.0.222NotificationscsitgtFCPLinkBreakcurrentSCSI Target: Link Break on FCP adapter
1.3.6.1.4.1.789.0.224NotificationscsitgtPartnerPathMisconfiguredcurrentSCSI Target: FCP Partner Path Misconfigured
1.3.6.1.4.1.789.0.226NotificationscsitgtThrottleNoticecurrentSCSI Target: Throttle limit event notification
1.3.6.1.4.1.789.0.237NotificationvifPrimaryLinkFaileddeprecatedVif: The primary Interface on a Single mode vif has failed
1.3.6.1.4.1.789.0.238NotificationvifAllLinksFaileddeprecatedVif: All the links of the vif have failed
1.3.6.1.4.1.789.0.245NotificationvfStoppedcurrentA vFiler has stopped.
1.3.6.1.4.1.789.0.246NotificationvfStartedcurrentA vFiler has started.
1.3.6.1.4.1.789.0.254NotificationvscanVirusDetectedErrorcurrentVScan: A virus scanner has detected a virus on the Filer
1.3.6.1.4.1.789.0.255NotificationvscanDisConnectioncurrentVScan: A virus scanner has dropped its connection from the Filer
1.3.6.1.4.1.789.0.256NotificationvscanConfigurationChangecurrentVScan: There has been a change to the vscan configuration
1.3.6.1.4.1.789.0.257NotificationvscanConnectioncurrentVScan: A virus scanner has made a connection to the Filer
1.3.6.1.4.1.789.0.266NotificationvscanServerUpgradecurrentVScan: The Vscan server has been upgraded
1.3.6.1.4.1.789.0.272NotificationvolumeRestrictedByMirrorBigIocurrentA volume that experienced a medium error during reconstruction is restricted and marked wafl-inconsistent, but starting wafliron has failed. This trap is issue…
1.3.6.1.4.1.789.0.274NotificationvolumeInconsistentUmountcurrentThis trap is issued when we unmount a volume due to an inconsistency.
1.3.6.1.4.1.789.0.275NotificationvolumeStateChangedcurrentVolume is being taken offline or being restricted. The string sent with trap specifies name of affected volume and its state.
1.3.6.1.4.1.789.0.276NotificationvolumeOnlinecurrentVolume is online now. The string sent with trap specifies name of volume which is online now.
1.3.6.1.4.1.789.0.283NotificationrmcCardNeedsReplacementcurrentRemote Management Controller card needs replacement. The trap includes a string specifying the reason for replacement
1.3.6.1.4.1.789.0.284NotificationrmcCardMissingCablescurrentRemote Management Controller card is missing its internal cable, or LAN cable or power supply cable. The trap includes a string specifying the missing componen…
1.3.6.1.4.1.789.0.294NotificationvolumeRemoteUnreachablecurrentLocal volume encountered an error while communicating to remote volume.
1.3.6.1.4.1.789.0.296NotificationvolumeRemoteOkcurrentThe communication between remote volume and local volume returned to normal.
1.3.6.1.4.1.789.0.297NotificationvolumeRemoteRestoredcurrentThe data on remote volume has been fully restored to local volume.
1.3.6.1.4.1.789.0.298NotificationvolumeRemoteRestoreBegincurrentThe data on remote volume has started being restored to local volume by Restore-on-Demand.
1.3.6.1.4.1.789.0.304NotificationvolumeRestrictedRootConflictcurrentVolume is restricted due to a root volume conflict. The string sent with trap specifies name of conflicting volume which is being restricted.
1.3.6.1.4.1.789.0.314NotificationvolumeOfflineTooBigcurrentVolume cannot be brought online because its raw size is larger than maximum allowed size. The string sent with trap specifies name of affected volume and its r…
1.3.6.1.4.1.789.0.324NotificationvolumeOfflinecurrentVolume is being taken offline. The string sent with trap specifies name of affected volume and reason for being taken offline.
1.3.6.1.4.1.789.0.334NotificationvolumeRestrictedcurrentVolume is being restricted. The string sent with trap specifies name of affected volume and reason for being restricted.
1.3.6.1.4.1.789.0.344NotificationvolumeDegradedDirtycurrentVolume is degraded and has dirty parity. WAFL_check must be run on this volume before it can be brought online. The string sent with trap specifies name of aff…
1.3.6.1.4.1.789.0.354NotificationvolumeErrorcurrentThis trap is issued when a volume cannot be brought online due to an error. The string sent with trap specifies name of affected volume and error description.
1.3.6.1.4.1.789.0.356NotificationvolumeSelectedRootConflictcurrentThis trap is issued when multiple root volumes are detected at boot time and one is selected as the root by default. The string sent with the trap specifies th…
1.3.6.1.4.1.789.0.364NotificationsnapmirrorSyncFailedcurrentSynchronous SnapMirror failed and went into asynchronous mode.
1.3.6.1.4.1.789.0.366NotificationsnapmirrorSyncOkcurrentSynchronous SnapMirror went into synchronous mode.
1.3.6.1.4.1.789.0.371NotificationchassisTemperatureShutdowncurrentThe chassis temperature is extreme. The appliance has initiated a shutdown to protect itself. The operating environment should be monitored and corrected befor…
1.3.6.1.4.1.789.0.372NotificationchassisTemperatureWarningcurrentThe chassis temperature is either too high or too low. The temperature should be monitored and, if possible, corrected.
1.3.6.1.4.1.789.0.375NotificationchassisTemperatureUnknowncurrentThe chassis temperature is unknown, because reading can't be obtained from the chassis temperature sensor.
1.3.6.1.4.1.789.0.376NotificationchassisTemperatureOkcurrentThe chassis temperature is OK.
1.3.6.1.4.1.789.0.381NotificationchassisCPUFanStoppedcurrentOne or more CPU fans have stopped. The appliance has initiated a shutdown to protect itself. A new motherboard may be required to correct the fan. Contact cust…
1.3.6.1.4.1.789.0.383NotificationchassisCPUFanSlowcurrentA CPU fan is spinning too slowly. A new motherboard may be required to correct the fan. Contact customer support for direction.
1.3.6.1.4.1.789.0.386NotificationchassisCPUFanOkcurrentAll CPU fan(s) are properly functioning.
1.3.6.1.4.1.789.0.391NotificationchassisPowerSuppliesFailedcurrentMultiple chassis power supplies failed.
1.3.6.1.4.1.789.0.392NotificationchassisPowerSupplyDegradedcurrentOne or more chassis power supplies are degraded. A description of the degraded state has been logged to the console and message log file.
1.3.6.1.4.1.789.0.393NotificationchassisPowerSupplyFailedcurrentOne chassis power supply failed.
1.3.6.1.4.1.789.0.394NotificationchassisPowerSupplyRemovedcurrentOne or more chassis power supplies are removed.
1.3.6.1.4.1.789.0.395NotificationchassisPowerSupplyOffcurrentOne or more chassis power supplies are off.
1.3.6.1.4.1.789.0.396NotificationchassisPowerSuppliesOkcurrentThe chassis power supplies are all functioning properly.
1.3.6.1.4.1.789.0.397NotificationchassisPowerSupplyOkcurrentThis chassis power supply is functioning properly.
1.3.6.1.4.1.789.0.403NotificationchassisPowerDegradedcurrentThe power within the chassis is degraded. A description of the degraded state has been logged to the console and message log file.
1.3.6.1.4.1.789.0.406NotificationchassisPowerOkcurrentThe power within the chassis is functioning properly.
1.3.6.1.4.1.789.0.412NotificationchassisFanDegradedcurrentA chassis fan has been degraded.
1.3.6.1.4.1.789.0.413NotificationchassisFanRemovedcurrentA chassis fan FRU has been removed.
1.3.6.1.4.1.789.0.414NotificationchassisFanStoppedcurrentOne or more chassis fans have stopped.
1.3.6.1.4.1.789.0.415NotificationchassisFanWarningcurrentOne or more chassis fans is spinning slowly or too fast.
1.3.6.1.4.1.789.0.416NotificationchassisFanOkcurrentAll chassis fans are functioning properly.
1.3.6.1.4.1.789.0.424NotificationwriteVerificationFailedcurrentA write has failed a verification test on a SnapValidator enabled volume.
1.3.6.1.4.1.789.0.434NotificationprefDCDisconnectdeprecatedAll connections to domain controllers in the preferred domain controllers list have been lost.
1.3.6.1.4.1.789.0.435NotificationdomainControllerDisconnectcurrentA CIFS domain controller connection to the filer has failed.
1.3.6.1.4.1.789.0.436NotificationdcPasswdChangeFailedcurrentAn attempt to change the storage system's password with the domain controller has failed.
1.3.6.1.4.1.789.0.437NotificationdomainControllerConnectedcurrentA CIFS domain controller connection to the filer has been established.
1.3.6.1.4.1.789.0.444NotificationplexFailedcurrentThis trap is issued when one plex of a mirrored aggregate is failed. The string sent with this trap specifies name of affected plex or mirrored aggregate.
1.3.6.1.4.1.789.0.454NotificationplexOfflinecurrentThis trap is issued when a plex becomes offline. The string sent with this trap specifies name of affected plex or mirrored aggregate.
1.3.6.1.4.1.789.0.464NotificationshelfSESElectronicsFailedcurrentOne or more of the enclosure services devices in a disk shelf has failed. Some shelf designs combine the enclosure monitoring hardware function into the module…
1.3.6.1.4.1.789.0.465NotificationshelfSESElectronicsWarningcurrentOne or more of the enclosure services devices in a disk shelf has reported a problem. Some shelf designs combine the enclosure monitoring hardware function int…
1.3.6.1.4.1.789.0.467NotificationshelfSESElectronicsInfocurrentA previously reported failure of an enclosure services device in a disk shelf has been corrected, or the device has reported information that does not necessar…
1.3.6.1.4.1.789.0.473NotificationshelfIFModuleFailedcurrentOne or more of the storage interface modules in a disk shelf has failed. Some shelf designs combine the enclosure monitoring hardware function into the module …
1.3.6.1.4.1.789.0.475NotificationshelfIFModuleWarningcurrentOne or more of the storage interface modules in a disk shelf has a warning condition. Some shelf designs combine the enclosure monitoring hardware function int…
1.3.6.1.4.1.789.0.477NotificationshelfIFModuleInfocurrentA previously reported failure of a disk shelf interface module has been corrected, or the module has reported information that does not necessarily require cus…
1.3.6.1.4.1.789.0.482NotificationmaxDirSizeAlertcurrentA directory has reached its maxdirsize limit. Either increase the maxdirsize or clean up the directory.
1.3.6.1.4.1.789.0.485NotificationmaxDirSizeWarningcurrentA directory is getting close to its maxdirsize limit. Either increase the maxdirsize or clean up the directory.
1.3.6.1.4.1.789.0.497NotificationcifsStatsExhaustMemCtrlBlkdeprecatedA request for a CIFS control block cannot be granted. All control blocks are in use.
1.3.6.1.4.1.789.0.501NotificationchassisPSRemovedxMinShutdowncurrentPower Supply Unit is removed from the system. System will be shutdown in x minutes if it is not put back.
1.3.6.1.4.1.789.0.505NotificationchassisPSUsMismatchdeprecatedPower Supply Units in the system are of different type. Please replace them with correct Power Supply Units.
1.3.6.1.4.1.789.0.511NotificationchassisFanFailxMinShutdowncurrentMultiple chassis fan failure. System will shut down in a few minutes if not corrected.
1.3.6.1.4.1.789.0.515NotificationchassisPSUwrongInputdeprecatedPower Supply Unit (PSU) in the system is connected to an incompatible external power source. Please change the power source being used or replace the PSU with …
1.3.6.1.4.1.789.0.521NotificationpowerSupplyFanFailxMinShutdowndeprecatedMultiple power supply fans failure. System will shut down in a few minutes if not corrected.
1.3.6.1.4.1.789.0.525NotificationioCardFailedcurrentAn IO card is degraded. The trap includes a string describing the degraded IO card.
1.3.6.1.4.1.789.0.526NotificationioCardOkcurrentThe IO card is functioning properly. The trap includes a string containing the slot number of the IO card.
1.3.6.1.4.1.789.0.532NotificationremoteSystemMgtAlertcurrentsystem remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structu…
1.3.6.1.4.1.789.0.535NotificationremoteSystemMgmtWarningcurrentsystem remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structu…
1.3.6.1.4.1.789.0.536NotificationremoteSystemMgmtNotificationcurrentsystem remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structu…
1.3.6.1.4.1.789.0.547NotificationremoteSystemMgmtPeriodiccurrentThis is a periodic keep alive from system remote management. The trap includes a string describing the specific event which triggered the trap. The string is s…
1.3.6.1.4.1.789.0.556NotificationremotesystemMgmtTestcurrentThis is a test trap from system remote management. The trap includes a string describing the specific event which triggered the trap. The string is structured …
1.3.6.1.4.1.789.0.562NotificationdiskMultipathOneSwitchcurrentA multipathed disk is only connected to one switch.
1.3.6.1.4.1.789.0.563NotificationdiskMultipathNoTakeovercurrentMultipath disks or luns could not be detected for the partner. The node will be unable to takeover correctly.
1.3.6.1.4.1.789.0.565NotificationdiskMultipathWarningcurrentSynchronous mirroring is enabled, even though disks are not multipathed.
1.3.6.1.4.1.789.0.574NotificationdriveDisableErrcurrentA drive has been disabled by the shelf module due to hardware errors. If it is the only drive in the shelf that is disabled, replace the drive.
1.3.6.1.4.1.789.0.587NotificationhbaOfflineInformationcurrentA host bus adapter (HBA) port has been disabled. This state may be caused either by user command or by errors that make the interface unable to communicate wit…
1.3.6.1.4.1.789.0.594NotificationfcOfflineErrorcurrentA FibreChannel adapter port has gone off-line due to an error condition.
1.3.6.1.4.1.789.0.595NotificationfcOnlineFailWarningcurrentA FibreChannel adapter has failed to come on-line due to some error condition. Check the cables for proper connections.
1.3.6.1.4.1.789.0.596NotificationfcOffLineNotificationcurrentA FibreChannel adapter has gone off line. This state may be caused either by user command or by errors that make the interface unable to communicate with attac…
1.3.6.1.4.1.789.0.597NotificationfcOnlineInformationcurrentA FibreChannel adapter port has come on-line.
1.3.6.1.4.1.789.0.606NotificationlunSnapRestoreStatuscurrentStatus of the Snap Restore
1.3.6.1.4.1.789.0.616NotificationlunCloneCreatecurrentCreated a LUN Clone
1.3.6.1.4.1.789.0.626NotificationlunCloneSplitStartcurrentLUN Clone Split started
1.3.6.1.4.1.789.0.627NotificationlunCloneSplitCompletecurrentLUN Clone Split completed
1.3.6.1.4.1.789.0.636NotificationflexCloneSplitStartcurrentFlex Clone Split started
1.3.6.1.4.1.789.0.637NotificationflexCloneSplitCompletecurrentFlex Clone Split completed
1.3.6.1.4.1.789.0.646NotificationvolumeCloneCreatecurrentCreated a Volume Clone
1.3.6.1.4.1.789.0.656NotificationsnapAutoDeletecurrentSnapshot Auto Deleted
1.3.6.1.4.1.789.0.666NotificationvolumeAutogrowcurrentVolume is Auto Grown
1.3.6.1.4.1.789.0.674NotificationtimedTargetNotRespondingcurrentNTP Time Daemon lost contact with the configured target
1.3.6.1.4.1.789.0.676NotificationextcacheCardErrorcurrentExternal cache card failure
1.3.6.1.4.1.789.0.686NotificationextcacheCardOfflinecurrentExternal cache is taken offline
1.3.6.1.4.1.789.0.695NotificationsvBackupSnapWarningLimitcurrentThe remaining number of Snapshot copies for a backup schedule is below warning limit specified.
1.3.6.1.4.1.789.0.705NotificationavTrendLicenseExpiredcurrentTrend Micro antivirus license has expired
1.3.6.1.4.1.789.0.706NotificationavTrendLicenseExpiringcurrentTrend Micro antivirus license is about to expire
1.3.6.1.4.1.789.0.712NotificationrebootAbnormalcurrentSystem rebooted abnormally after any of the following events: event = watchdog reset, agent watchdog reset, panic, power-glitch.
1.3.6.1.4.1.789.0.716NotificationrebootNormalcurrentSystem rebooted normally after any of the following events: event = giveback, revert, WAFL check, power-on, internal reboot, internal halt, rlm system reset, o…
1.3.6.1.4.1.789.0.724NotificationvolMoveCutoverDeferredcurrentA volume move job cannot be completed because cutover phase has been deferred.
1.3.6.1.4.1.789.0.734NotificationvolMoveCutoverFailedcurrentA volume move job cannot be completed because the cutover attempt resulted in failure.
1.3.6.1.4.1.789.0.736NotificationvolMoveDonecurrentA volume move job completed successfully.
1.3.6.1.4.1.789.0.737NotificationvolMoveCutoverDeferredWaitcurrentA volume move has reached the cutover phase and is waiting for the user to trigger cutover because the user specified wait for cutover-action
1.3.6.1.4.1.789.0.741NotificationscsibladeOutOfQuorumcurrentThe node has lost connectivity with the other nodes in the cluster. Both fcp and iscsi traffic have been disabled on this node. The corrective action is to reb…
1.3.6.1.4.1.789.0.746NotificationscsibladeInQuorumcurrentThe node established connectivity with the other nodes in the cluster.
1.3.6.1.4.1.789.0.755NotificationqosMonitorMemoryMaxedcurrentQoS dynamic memory has reached its limit. Some QoS features may operate in a limited capacity.
1.3.6.1.4.1.789.0.757NotificationqosMonitorMemoryAbatedcurrentQoS dynamic memory is no longer at its limit. All QoS features will operate as normal.
1.3.6.1.4.1.789.0.767NotificationsfoAggregateRelocatedcurrentThis trap is issued when an SFO aggregate is relocated permanently from one node to another.
1.3.6.1.4.1.789.0.773NotificationavUpdateFailedcurrentThe anti-virus software update failed.
1.3.6.1.4.1.789.0.774NotificationavLicenseCheckFailedcurrentThe anti-virus software license validation failed.
1.3.6.1.4.1.789.0.775NotificationavMcAfeeProductExpiredcurrentMcAfee product has expired.
1.3.6.1.4.1.789.0.776NotificationavRemedycurrentRemedy action taken. The file has been repaired, deleted or quarantined.
1.3.6.1.4.1.789.0.777NotificationavLicenseCheckcurrentLicense validation was successful.
1.3.6.1.4.1.789.0.783NotificationavRemedyFailurecurrentRemedy action failed. The file was not repaired, deleted or quarantined.
1.3.6.1.4.1.789.0.785NotificationavMcAfeeEngineExpiredcurrentMcAfee product has expired.
1.3.6.1.4.1.789.0.786NotificationavMcAfeeProductExpiringcurrentMcAfee product is expiring.
1.3.6.1.4.1.789.0.793Notificationav2gbFileNotScannedcurrentA file larger than 2GB is not scanned and marked as clean.
1.3.6.1.4.1.789.0.796NotificationavMcAfeeEngineExpiringcurrentMcAfee engine is expiring.
1.3.6.1.4.1.789.0.802NotificationavVirusfoundcurrentVirus found while scanning.
1.3.6.1.4.1.789.0.803NotificationavMcAfeeLicenseFailedcurrentMcAfee antivirus license activation failed.
1.3.6.1.4.1.789.0.804NotificationavDisableFailedcurrentThe anti-virus service disabling failed in the cluster.
1.3.6.1.4.1.789.0.805NotificationavDisablecurrentThe anti-virus service is disabled in the cluster.
1.3.6.1.4.1.789.0.806NotificationavMcAfeeLicenseExpiringcurrentMcAfee antivirus license is about to expire.
1.3.6.1.4.1.789.0.807NotificationavEnablecurrentThe anti-virus service is enabled in the cluster.
1.3.6.1.4.1.789.0.812NotificationavSpywareFoundcurrentSpyware found while scanning.
1.3.6.1.4.1.789.0.813NotificationavEnableFailedcurrentThe anti-virus service enabling failed in the cluster.
1.3.6.1.4.1.789.0.814NotificationavRollbackFailedcurrentThe anti-virus software rollback failed.
1.3.6.1.4.1.789.0.816NotificationavRollbackcurrentThe anti-virus software is rolled back.
1.3.6.1.4.1.789.0.817NotificationavUpdatecurrentThe anti-virus software is updated.
1.3.6.1.4.1.789.0.824NotificationsnmpBusycurrentThe SNMP server is too busy.
1.3.6.1.4.1.789.0.837NotificationlunDestroycurrentA LUN was destroyed.
1.3.6.1.4.1.789.0.862NotificationhealthMonitorAlertRaisedcurrentA Health Monitor has created an alert.
1.3.6.1.4.1.789.0.867NotificationhealthMonitorAlertClearedcurrentA Health Monitor has cleared an alert.
1.3.6.1.4.1.789.0.873NotificationvolumeLogicalOverallocatedcurrentThe volume has over allocated space and may not be able to honor file reservations or the aggregate has over allocated space and may not be able to honor volum…
1.3.6.1.4.1.789.0.875NotificationvolumeReserveGrewcurrentAt least one volume's WAFL reserve grew because it was physically over allocated.
1.3.6.1.4.1.789.0.882NotificationvolumePhysicalOverallocatedcurrentThe volume/aggregate is running dangerously low on free blocks to write to.
1.3.6.1.4.1.789.0.895NotificationsmVaultSnapWarnLimitcurrentThe snapshot count limit on the destination volume has been reached.
1.3.6.1.4.1.789.0.896NotificationlunRelocationCompletioncurrentLun relocation completed successfully
1.3.6.1.4.1.789.0.905NotificationsmSyncOutOfSyncWarncurrentA synchronous granular CG relationship has transitioned from in-sync to out-of-sync and remained out-of-sync for longer than expected.
1.3.6.1.4.1.789.0.973NotificationclusterLinkDowncurrentA cluster link has been lost.
1.3.6.1.4.1.789.0.983NotificationclusterL2ConnFailcurrentThe l2ping command is currently failing between cluster ports.
1.3.6.1.4.1.789.0.993NotificationclusterPingDropLargecurrentPings of large packets between cluster ports are currently failing.
1.3.6.1.4.1.789.0.1002NotificationdiskFailedRemoveCarriercurrentAll disks in a carrier that contains more than one disk are failed by Data ONTAP(R) and the carrier can be removed.
1.3.6.1.4.1.789.0.1045NotificationsasConnectorWarncurrentA cable connecting a SAS device to a disk shelf has been removed or failed.
1.3.6.1.4.1.789.0.1047NotificationsasConnectorInfocurrentA previously-existing error condition involving a SAS cable has been corrected.
1.3.6.1.4.1.789.0.1054NotificationsesShelfPowerSupplyErrorcurrentA shelf power supply has failed or been removed.
1.3.6.1.4.1.789.0.1055NotificationsesShelfPowerSupplyWarncurrentA shelf power supply has indicated a warning condition.
1.3.6.1.4.1.789.0.1057NotificationsesShelfPowerSupplyInfocurrentA previously reported error or warning condition involving a shelf power supply has been corrected.
1.3.6.1.4.1.789.0.1064NotificationvolRehostFailedcurrentA volume rehost attempt has failed. The volume is available under source Vserver.
1.3.6.1.4.1.789.0.1065NotificationsesShelfVoltageWarningcurrentThis message occurs when a warning condition is detected in the indicated disk shelf voltage sensor. The shelf might be able to continue operation.
1.3.6.1.4.1.789.0.1067NotificationvolRehostSucceededcurrentA volume rehost attempt is successful.
1.3.6.1.4.1.789.0.1072NotificationoffboxvscanVirusDetectedErrorcurrentVScan: A possible virus has been detected
1.3.6.1.4.1.789.0.1103NotificationsnmpTestTraphostcurrentSNMP test trap is generated.
1.3.6.1.4.1.789.0.1114NotificationsnmpFipsSupportcurrentData ONTAP is operating in FIPS compliant mode but SNMPv3 is configured with non-compliant ciphers or hash algorithms. Hence SNMPv3 is disabled.
1.3.6.1.4.1.789.0.1121NotificationnoNisServersAvailablecurrentNone of the configured NIS servers are reachable at this point of time. The string sent with the trap gives the name of the affected Storage Virtual Machine.
1.3.6.1.4.1.789.0.1131NotificationnoLdapServersAvailablecurrentNone of the configured LDAP servers are reachable at this point of time. The string sent with the trap gives the name of the affected Storage Virtual Machine.
1.3.6.1.4.1.789.0.1141NotificationnoLsaServersAvailablecurrentNone of the configured LSA servers are reachable at this point of time. The string sent with the trap gives the name of the affected Storage Virtual Machine.
1.3.6.1.4.1.789.0.1151NotificationnoNetlogonServersAvailablecurrentNone of the configured Netlogon servers are reachable at this point of time. The string sent with the trap gives the name of the affected Storage Virtual Machi…
1.3.6.1.4.1.789.0.1164NotificationsesShelfDcmErrorcurrentA shelf dcm is not installed or not supported.
1.3.6.1.4.1.789.0.1165NotificationsesShelfDcmWarncurrentA shelf dcm has indicated a warning condition.
1.3.6.1.4.1.789.0.1167NotificationsesShelfDcmInfocurrentA previously reported error or warning condition involving a shelf dcm has been corrected.
1.3.6.1.4.1.789.0.1194NotificationsnmpSnmpv3EnablecurrentThis message occurs when SNMPv3 is disabled due to a cluster in FIPS mode being upgraded to a version of ONTAP(R) software supporting the SNMPv3 FIPS feature. …
1.3.6.1.4.1.789.0.1204NotificationsnmpFipsObjsDelFailedcurrentThe system failed to delete SNMP traphosts and users that were not FIPS compliant. It tried to automatically delete them when FIPS was configured in the cluste…
1.3.6.1.4.1.789.0.1211NotificationfcBridgeTempEmergencycurrentThe FC-to-SAS bridge has reached the critical temperature threshold, and will shut down.
1.3.6.1.4.1.789.0.1212NotificationfcBridgeTempAlertcurrentThe FC-to-SAS bridge is operating at elevated temperature levels and action should be taken to restore proper cooling.
1.3.6.1.4.1.789.0.1216NotificationfcBridgeTempNoticecurrentThe FC-to-SAS bridge has returned to normal operating temperature.
1.3.6.1.4.1.789.0.1222NotificationfcBridgeFcPortAlertcurrentThis message occurs when an FC port has gone offline.
1.3.6.1.4.1.789.0.1226NotificationfcBridgeFcPortNoticecurrentThis message occurs when an FC port has come back online
1.3.6.1.4.1.789.0.1232NotificationfcBridgeSASPortAlertcurrentThis message occurs when a SAS port has gone offline.
1.3.6.1.4.1.789.0.1236NotificationfcBridgeSASPortNoticecurrentThis message occurs when a SAS port has come back online
1.3.6.1.4.1.789.0.1242NotificationfcBridgeThroughputAlertcurrentThis message occurs when an FC-to-SAS bridge is experiencing degraded throughput.
1.3.6.1.4.1.789.0.1246NotificationfcBridgeThroughputNoticecurrentThis message occurs when an FC-to-SAS bridge has recovered from degraded throughput.
1.3.6.1.4.1.789.0.1252NotificationfcBridgePowerSupplyAlertcurrentThis message occurs when an FC-to-SAS bridge power supply has failed.
1.3.6.1.4.1.789.0.1256NotificationfcBridgePowerSupplyNoticecurrentThis message occurs when an FC-to-SAS bridge power supply has returned to normal operation.
1.3.6.1.4.1.789.0.1262NotificationfcBridgeSasPhyTransitionAlertcurrentThis message occurs when a SAS port on a bridge has transitioned to offline.
1.3.6.1.4.1.789.0.1266NotificationfcBridgeSasPhyTransitionNoticecurrentThis message occurs when a SAS port on a bridge has transitioned to online.
1.3.6.1.4.1.789.0.1302NotificationvsaCloudProviderScheduledEventScheduledcurrentThis message occurs when a cloud-provider maintenance event has been initially scheduled.
1.3.6.1.4.1.789.0.1303NotificationvsaCloudProviderScheduledEventUpdatecurrentThis message occurs when the status of a previously scheduled cloud-provider maintenance event has been updated.
1.3.6.1.4.1.789.1Nodenetapp1
1.3.6.1.4.1.789.1.1Nodeproduct
1.3.6.1.4.1.789.1.1.1ScalarproductTyperead-onlycurrentThe product type representing the target platform.
1.3.6.1.4.1.789.1.1.2ScalarproductVersionread-onlycurrentVersion String for the Software Running on this platform.
1.3.6.1.4.1.789.1.1.3ScalarproductIdread-onlycurrentThe System ID of this system.
1.3.6.1.4.1.789.1.1.4ScalarproductVendorread-onlycurrentThe vendor id of this system, indicating the company that has supplied the product.
1.3.6.1.4.1.789.1.1.5ScalarproductModelread-onlycurrentThe model name of the system. Examples are FAS980 and FAS3050.
1.3.6.1.4.1.789.1.1.6ScalarproductFirmwareVersionread-onlycurrentVersion string for the Firmware running on this platform.
1.3.6.1.4.1.789.1.1.7ScalarproductGuiUrlread-onlycurrentThe complete URL used to access the administrative GUI for a browser-based interface.
1.3.6.1.4.1.789.1.1.8ScalarproductApiUrlread-onlycurrentThe complete URL used to access the administrative API for a programmatic interface.
1.3.6.1.4.1.789.1.1.9ScalarproductSerialNumread-onlycurrentThe product serial number. Returns unknown if it cannot be determined.
1.3.6.1.4.1.789.1.1.10ScalarproductPartnerSerialNumread-onlycurrentThe partner's serial number, not applicable if there is no partner, and unknown if it cannot be determined.
1.3.6.1.4.1.789.1.1.11ScalarproductCPUArchread-onlycurrentThe CPU architecture type of this appliance
1.3.6.1.4.1.789.1.1.12ScalarproductTrapDataread-onlycurrentThis returns a static string. This object is used as a placeholder for enterprise traps.
1.3.6.1.4.1.789.1.1.13ScalarproductMachineTyperead-onlycurrentThe machine type of the system. Examples are FAS980 and FAS3050.
1.3.6.1.4.1.789.1.1.14TableproductLicenseTablenot-accessibledeprecatedReturns information about the current list of licensed services, the type of license, and, if it is a time limited license, the expiration date. It also tells …
1.3.6.1.4.1.789.1.1.14.1RowproductLicenseEntrynot-accessibledeprecatedProvide a report of licenses.
1.3.6.1.4.1.789.1.1.14.1.1ColumnproductLicenseIndexread-onlydeprecatedIndex into the product license table.
1.3.6.1.4.1.789.1.1.14.1.2ColumnlicenseServiceread-onlydeprecatedName of the service.
1.3.6.1.4.1.789.1.1.14.1.3ColumnlicenseIsLicensedread-onlydeprecatedTrue if the service is licensed and has not expired, false otherwise.
1.3.6.1.4.1.789.1.1.14.1.4ColumnlicenseIsExpiredread-onlydeprecatedTrue if the promotional/time-expiring/demo license has expired, false otherwise.
1.3.6.1.4.1.789.1.1.14.1.5ColumnlicenseIsSiteread-onlydeprecatedTrue if the service is a site license, false otherwise.
1.3.6.1.4.1.789.1.1.14.1.6ColumnlicenseExpirationTimeStampread-onlydeprecatedExpected expiration timestamp in seconds since January 1, 1970, if it's a promotional/time-expiring license. 0 for all other licenses.
1.3.6.1.4.1.789.1.1.14.1.7ColumnlicenseIsAutoEnabledread-onlydeprecatedTrue if the service is automatically licensed (licenseIsLicensed will also be True) false otherwise.
1.3.6.1.4.1.789.1.2NodesysStat
1.3.6.1.4.1.789.1.2.1Nodecpu
1.3.6.1.4.1.789.1.2.1.1ScalarcpuUpTimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been up since the last boot.
1.3.6.1.4.1.789.1.2.1.2ScalarcpuBusyTimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been doing useful work since the last boot.
1.3.6.1.4.1.789.1.2.1.3ScalarcpuBusyTimePerCentread-onlycurrentThe percent of time that the CPU has been doing useful work since the last time a client requested the cpuBusyTimePerCent.
1.3.6.1.4.1.789.1.2.1.4ScalarcpuIdleTimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been idle since the last boot.
1.3.6.1.4.1.789.1.2.1.5ScalarcpuIdleTimePerCentread-onlycurrentThe percent of time that the CPU has been idle since the last time a client requested the cpuBusyTimePerCent.
1.3.6.1.4.1.789.1.2.1.6ScalarcpuCountread-onlycurrentThe number of CPUs in the system.
1.3.6.1.4.1.789.1.2.1.7ScalarcpuSwitchInvocationsread-onlycurrentThe number of sk_switch invocations.
1.3.6.1.4.1.789.1.2.1.8ScalarcpuContextSwitchesread-onlycurrentThe number of hardware context switches.
1.3.6.1.4.1.789.1.2.1.9ScalarcpuInterruptsread-onlycurrentThe number of interrupts during a CP.
1.3.6.1.4.1.789.1.2.1.10ScalarcpuNonCPInterruptsread-onlycurrentThe number of interrupts not during a CP.
1.3.6.1.4.1.789.1.2.1.11ScalarcpuCPInterruptPercentread-onlycurrentThe percentage of time handling CP interrupts.
1.3.6.1.4.1.789.1.2.1.12ScalarcpuNonCPInterruptPercentread-onlycurrentThe percentage of time handling non-cp interrupts.
1.3.6.1.4.1.789.1.2.1.13ScalarcpuTotalDomainSwitchesread-onlycurrentThe total number of Domain Switches.
1.3.6.1.4.1.789.1.2.1.14TablecDOTCpuTablenot-accessiblecurrentProvide a report of the current CPU statistics on per node basis
1.3.6.1.4.1.789.1.2.1.14.1RowcDOTCpuEntrynot-accessiblecurrentProvide a report of the node's CPU statistics
1.3.6.1.4.1.789.1.2.1.14.1.1ColumncDOTCpuNodeNameread-onlycurrentNode Name. Same as nodeName for a specific node.
1.3.6.1.4.1.789.1.2.1.14.1.2ColumncDOTCpuUpTimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been up since the last boot.
1.3.6.1.4.1.789.1.2.1.14.1.3ColumncDOTCpuBusyTimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been doing useful work since the last boot.
1.3.6.1.4.1.789.1.2.1.14.1.4ColumncDOTCpuBusyTimePerCentread-onlycurrentThe percent of time that the CPU has been doing useful work since the last time a client requested the cDOTCpuBusyTimePerCent.
1.3.6.1.4.1.789.1.2.1.14.1.5ColumncDOTCpuIdleTimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been idle since the last boot.
1.3.6.1.4.1.789.1.2.1.14.1.6ColumncDOTCpuIdleTimePerCentread-onlycurrentThe percent of time that the CPU has been idle since the last time a client requested the cDOTCpuBusyTimePerCent.
1.3.6.1.4.1.789.1.2.1.14.1.7ColumncDOTCpuCountread-onlycurrentThe number of CPUs in the system.
1.3.6.1.4.1.789.1.2.1.14.1.8ColumncDOTCpuSwitchInvocationsread-onlycurrentThe number of sk_switch invocations.
1.3.6.1.4.1.789.1.2.1.14.1.9ColumncDOTCpuContextSwitchesread-onlycurrentThe number of hardware context switches.
1.3.6.1.4.1.789.1.2.1.14.1.10ColumncDOTCpuInterruptsread-onlycurrentThe number of interrupts during a CP.
1.3.6.1.4.1.789.1.2.1.14.1.11ColumncDOTCpuNonCPInterruptsread-onlycurrentThe number of interrupts not during a CP.
1.3.6.1.4.1.789.1.2.1.14.1.12ColumncDOTCpuCPInterruptPercentread-onlycurrentThe percentage of time handling CP interrupts.
1.3.6.1.4.1.789.1.2.1.14.1.13ColumncDOTCpuNonCPInterruptPercentread-onlycurrentThe percentage of time handling non-cp interrupts.
1.3.6.1.4.1.789.1.2.1.14.1.14ColumncDOTCpuTotalDomainSwitchesread-onlycurrentThe total number of Domain Switches.
1.3.6.1.4.1.789.1.2.2Nodemisc
1.3.6.1.4.1.789.1.2.2.1ScalarmiscNfsOpsread-onlydeprecatedThe total number of Server side NFS calls since the last boot
1.3.6.1.4.1.789.1.2.2.2ScalarmiscNetRcvdKBread-onlydeprecatedThe total number of KBytes received on all the network interfaces, since the last boot.
1.3.6.1.4.1.789.1.2.2.3ScalarmiscNetSentKBread-onlydeprecatedThe total number of KBytes transmitted on all the network interfaces, since the last boot.
1.3.6.1.4.1.789.1.2.2.4ScalarmiscGlobalStatusread-onlycurrentThis indicates the overall status of the appliance. The algorithm to determine the value uses both hardware status (e.g. the number of failed fans) and volume …
1.3.6.1.4.1.789.1.2.2.5ScalarmiscHighNfsOpsread-onlydeprecatedThe total number of Server side NFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is …
1.3.6.1.4.1.789.1.2.2.6ScalarmiscLowNfsOpsread-onlydeprecatedThe total number of Server side NFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is…
1.3.6.1.4.1.789.1.2.2.7ScalarmiscHighCifsOpsread-onlydeprecatedThe total number of Server side CIFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is…
1.3.6.1.4.1.789.1.2.2.8ScalarmiscLowCifsOpsread-onlydeprecatedThe total number of Server side CIFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object i…
1.3.6.1.4.1.789.1.2.2.9ScalarmiscHighHttpOpsread-onlydeprecatedThe total number of HTTP operations received since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object …
1.3.6.1.4.1.789.1.2.2.10ScalarmiscLowHttpOpsread-onlydeprecatedThe total number of HTTP operations received since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object…
1.3.6.1.4.1.789.1.2.2.11ScalarmiscHighNetRcvdBytesread-onlydeprecatedThe total number of bytes received on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned …
1.3.6.1.4.1.789.1.2.2.12ScalarmiscLowNetRcvdBytesread-onlydeprecatedThe total number of bytes received on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned…
1.3.6.1.4.1.789.1.2.2.13ScalarmiscHighNetSentBytesread-onlydeprecatedThe total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsign…
1.3.6.1.4.1.789.1.2.2.14ScalarmiscLowNetSentBytesread-onlydeprecatedThe total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsig…
1.3.6.1.4.1.789.1.2.2.15ScalarmiscHighDiskReadBytesread-onlydeprecatedThe total number of bytes read from disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is d…
1.3.6.1.4.1.789.1.2.2.16ScalarmiscLowDiskReadBytesread-onlydeprecatedThe total number of bytes read from disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is …
1.3.6.1.4.1.789.1.2.2.17ScalarmiscHighDiskWriteBytesread-onlydeprecatedThe total number of bytes written to disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is …
1.3.6.1.4.1.789.1.2.2.18ScalarmiscLowDiskWriteBytesread-onlydeprecatedThe total number of bytes written to disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is…
1.3.6.1.4.1.789.1.2.2.19ScalarmiscHighTapeReadBytesread-onlydeprecatedThe total number of bytes read from tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is d…
1.3.6.1.4.1.789.1.2.2.20ScalarmiscLowTapeReadBytesread-onlydeprecatedThe total number of bytes read from tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is …
1.3.6.1.4.1.789.1.2.2.21ScalarmiscHighTapeWriteBytesread-onlydeprecatedThe total number of bytes written to tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is …
1.3.6.1.4.1.789.1.2.2.22ScalarmiscLowTapeWriteBytesread-onlydeprecatedThe total number of bytes written to tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is…
1.3.6.1.4.1.789.1.2.2.23ScalarmiscCacheAgeread-onlycurrentAge in minutes of the oldest read-only blocks in the buffer cache. This indicates how fast read operations are cycling through system memory; when the applianc…
1.3.6.1.4.1.789.1.2.2.24ScalarmiscCorrectedMachineChecksread-onlycurrentNumber of corrected machine checks since the last boot.
1.3.6.1.4.1.789.1.2.2.25ScalarmiscGlobalStatusMessageread-onlycurrentA string describing the global status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
1.3.6.1.4.1.789.1.2.2.26ScalarmiscWindowsSetupWizardVersionread-onlycurrentThe version number of Windows Setup Wizard required to configure the appliance. Windows Setup Wizard with a version number lower than this integer is not capab…
1.3.6.1.4.1.789.1.2.2.27Scalarmisc64NfsOpsread-onlycurrentThe total number of Server side NFS calls since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.28Scalarmisc64CifsOpsread-onlycurrentThe total number of Server side CIFS calls since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.29Scalarmisc64HttpOpsread-onlycurrentThe total number of HTTP operations received since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.30Scalarmisc64NetRcvdBytesread-onlycurrentThe total number of bytes received on all the network interfaces, since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.31Scalarmisc64NetSentBytesread-onlycurrentThe total number of bytes transmitted on all the network interfaces, since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.32Scalarmisc64DiskReadBytesread-onlycurrentThe total number of bytes read from disk since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.33Scalarmisc64DiskWriteBytesread-onlycurrentThe total number of bytes written to disk since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.34Scalarmisc64TapeReadBytesread-onlycurrentThe total number of bytes read from tape since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.35Scalarmisc64TapeWriteBytesread-onlycurrentThe total number of bytes written to tape since the last boot. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.2.2.36TablecDOTMiscTablenot-accessiblecurrentProvide a report of miscellaneous variables on a per node basis.
1.3.6.1.4.1.789.1.2.2.36.1RowcDOTMiscEntrynot-accessiblecurrentProvide a report of the node's miscellaneous variables.
1.3.6.1.4.1.789.1.2.2.36.1.1ColumncDOTMiscNodeNameread-onlycurrentNode Name. Same as nodeName for a specific node.
1.3.6.1.4.1.789.1.2.2.36.1.2ColumncDOTMiscGlobalStatusread-onlycurrentThis indicates the overall status of this node. The algorithm to determine the value uses both hardware status (e.g. the number of failed fans) and volume stat…
1.3.6.1.4.1.789.1.2.2.36.1.3ColumncDOTMiscGlobalStatusMessageread-onlycurrentA string describing the global status of this node, including a description of the condition (if any) that caused the status to be anything other than ok(3).
1.3.6.1.4.1.789.1.2.3Nodecf
1.3.6.1.4.1.789.1.2.3.1ScalarcfSettingsread-onlycurrentClustered Failover configuration settings. The value notConfigured(1) indicates that the cluster is not licensed. The thisNodeDead(5) setting indicates that th…
1.3.6.1.4.1.789.1.2.3.2ScalarcfStateread-onlycurrentClustered Failover state.
1.3.6.1.4.1.789.1.2.3.3ScalarcfCannotTakeoverCauseread-onlycurrentThe reason this node cannot takeover its partner
1.3.6.1.4.1.789.1.2.3.4ScalarcfPartnerStatusread-onlycurrentThis is the status last returned by the Clustered Failover partner.
1.3.6.1.4.1.789.1.2.3.5ScalarcfPartnerLastStatusUpdateread-onlycurrentIf non-zero, the absolute time of the last update from the Clustered Failover partner.
1.3.6.1.4.1.789.1.2.3.6ScalarcfPartnerNameread-onlycurrentHostname for Clustered Failover partner.
1.3.6.1.4.1.789.1.2.3.7ScalarcfPartnerSysidread-onlycurrentSystem ID for Clustered Failover partner.
1.3.6.1.4.1.789.1.2.3.8ScalarcfInterconnectStatusread-onlycurrentThe current status of the interconnect. The partialFailure(3) status indicates that one of the links in the interconnect hardware is down.
1.3.6.1.4.1.789.1.2.4Nodeenvironment
1.3.6.1.4.1.789.1.2.4.1ScalarenvOverTemperatureread-onlycurrentAn indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceed…
1.3.6.1.4.1.789.1.2.4.2ScalarenvFailedFanCountread-onlycurrentCount of the number of chassis fans which are not operating within the recommended RPM range.
1.3.6.1.4.1.789.1.2.4.3ScalarenvFailedFanMessageread-onlycurrentText message describing the current condition of chassis fans. This is useful only if envFailedFanCount is not zero.
1.3.6.1.4.1.789.1.2.4.4ScalarenvFailedPowerSupplyCountread-onlycurrentCount of the number of power supplies which are in degraded mode.
1.3.6.1.4.1.789.1.2.4.5ScalarenvFailedPowerSupplyMessageread-onlycurrentText message describing the state of any power supplies which are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.
1.3.6.1.4.1.789.1.2.5Nodenvram
1.3.6.1.4.1.789.1.2.5.1ScalarnvramBatteryStatusread-onlycurrentAn indication of the current status of the NVRAM battery or batteries. Batteries which are fully or partially discharged may not fully protect the system durin…
1.3.6.1.4.1.789.1.2.6Nodecp
1.3.6.1.4.1.789.1.2.6.1ScalarcpTimeread-onlycurrentThe time (in hundredths of a second) since boot during which the system has had a consistency point (cp) operation in progress.
1.3.6.1.4.1.789.1.2.6.2ScalarcpFromTimerOpsread-onlycurrentThe number of consistency point operations since boot that were caused by timer.
1.3.6.1.4.1.789.1.2.6.3ScalarcpFromSnapshotOpsread-onlycurrentThe number of consistency point operations since boot that were caused by snapshot operation.
1.3.6.1.4.1.789.1.2.6.4ScalarcpFromLowWaterOpsread-onlycurrentThe number of consistency point operations since boot that were caused by low water mark.
1.3.6.1.4.1.789.1.2.6.5ScalarcpFromHighWaterOpsread-onlycurrentThe number of consistency point operations since boot that were caused by high water mark.
1.3.6.1.4.1.789.1.2.6.6ScalarcpFromLogFullOpsread-onlycurrentThe number of consistency point operations since boot that were caused by nv-log full.
1.3.6.1.4.1.789.1.2.6.7ScalarcpFromCpOpsread-onlycurrentThe number of back to back consistency point operations since boot.
1.3.6.1.4.1.789.1.2.6.8ScalarcpTotalOpsread-onlycurrentThe total number of consistency point operations since boot.
1.3.6.1.4.1.789.1.2.6.9ScalarcpFromFlushOpsread-onlycurrentThe number of consistency point operations since boot that were caused by flushing unlogged write data.
1.3.6.1.4.1.789.1.2.6.10ScalarcpFromSyncOpsread-onlycurrentThe number of consistency point operations since boot that were caused by file system sync requests.
1.3.6.1.4.1.789.1.2.6.11ScalarcpFromLowVbufOpsread-onlycurrentThe number of consistency point operations since boot that were caused by low virtual buffers.
1.3.6.1.4.1.789.1.2.6.12ScalarcpFromCpDeferredOpsread-onlycurrentThe number of back to back consistency point operations since boot that were deferred.
1.3.6.1.4.1.789.1.2.6.13ScalarcpFromLowDatavecsOpsread-onlycurrentThe number of consistency point operations since boot that were caused by low datavecs.
1.3.6.1.4.1.789.1.2.6.14ScalarcpFromLowMbufOpsread-onlycurrentThe number of consistency point operations since boot that were caused by low mbufs.
1.3.6.1.4.1.789.1.2.6.15ScalarcpFromNvlogReplayTakeoverTimeread-onlycurrentThe number of consistency point operations since boot that were caused by nvlog replay takeover time.
1.3.6.1.4.1.789.1.2.6.16TablecDOTCpTablenot-accessiblecurrentProvide a report of the current CP statistics on per node basis
1.3.6.1.4.1.789.1.2.6.16.1RowcDOTCpEntrynot-accessiblecurrentProvide a report of the node's CP statistics
1.3.6.1.4.1.789.1.2.6.16.1.1ColumncDOTCpNodeNamenot-accessiblecurrentNode Name. Same as node name.
1.3.6.1.4.1.789.1.2.6.16.1.2ColumncDOTCpTimeread-onlycurrentThe time (in hundredths of a second) since boot during which the system has had a consistency point (cp) operation in progress.
1.3.6.1.4.1.789.1.2.6.16.1.3ColumncDOTCpFromTimerOpsread-onlycurrentThe number of consistency point operations since boot that were caused by timer.
1.3.6.1.4.1.789.1.2.6.16.1.4ColumncDOTCpFromSnapshotOpsread-onlycurrentThe number of consistency point operations since boot that were caused by snapshot operation.
1.3.6.1.4.1.789.1.2.6.16.1.5ColumncDOTCpFromLowWaterOpsread-onlycurrentThe number of consistency point operations since boot that were caused by low water mark.
1.3.6.1.4.1.789.1.2.6.16.1.6ColumncDOTCpFromHighWaterOpsread-onlycurrentThe number of consistency point operations since boot that were caused by high water mark.
1.3.6.1.4.1.789.1.2.6.16.1.7ColumncDOTCpFromLogFullOpsread-onlycurrentThe number of consistency point operations since boot that were caused by nv-log full.
1.3.6.1.4.1.789.1.2.6.16.1.8ColumncDOTCpFromCpOpsread-onlycurrentThe number of back to back consistency point operations since boot.
1.3.6.1.4.1.789.1.2.6.16.1.9ColumncDOTCpTotalOpsread-onlycurrentThe total number of consistency point operations since boot.
1.3.6.1.4.1.789.1.2.6.16.1.10ColumncDOTCpFromFlushOpsread-onlycurrentThe number of consistency point operations since boot that were caused by flushing unlogged write data.
1.3.6.1.4.1.789.1.2.6.16.1.11ColumncDOTCpFromSyncOpsread-onlycurrentThe number of consistency point operations since boot that were caused by file system sync requests.
1.3.6.1.4.1.789.1.2.6.16.1.12ColumncDOTCpFromCpDeferredOpsread-onlycurrentThe number of back to back consistency point operations since boot that were deferred.
1.3.6.1.4.1.789.1.2.6.16.1.13ColumncDOTCpFromLowDatavecsOpsread-onlycurrentThe number of consistency point operations since boot that were caused by low datavecs.
1.3.6.1.4.1.789.1.2.6.16.1.14ColumncDOTCpFromLowMbufOpsread-onlycurrentThe number of consistency point operations since boot that were caused by low mbufs in mbuf pools.
1.3.6.1.4.1.789.1.2.6.16.1.15ColumncDOTCpFromNvlogReplayTakeoverTimeread-onlycurrentThe number of consistency point operations since boot that were caused by nvlog replay takeover time.
1.3.6.1.4.1.789.1.2.7Nodeautosupport
1.3.6.1.4.1.789.1.2.7.1ScalarautosupportStatusread-onlycurrentAn indication of the current status of auto support on the appliance. Describes the success or failure of most recent attempts to send auto supports.
1.3.6.1.4.1.789.1.2.7.2ScalarautosupportStatusMessageread-onlycurrentA string describing the auto support status, including a description of the condition (if any) that caused the status to be anything other than ok(1).
1.3.6.1.4.1.789.1.2.7.3ScalarautosupportSuccessfulSendsread-onlycurrentCount of the number of auto support messages successfully sent since the last reset.
1.3.6.1.4.1.789.1.2.7.4ScalarautosupportFailedSendsread-onlycurrentCount of the number of auto support messages not sent successfully since the last reset.
1.3.6.1.4.1.789.1.2.10NodenodeStats
1.3.6.1.4.1.789.1.2.10.1TablenodeStatTablenot-accessiblecurrentTable containing all counters in the cluster, organized on a per-node, per-category, per-object basis.
1.3.6.1.4.1.789.1.2.10.1.1RownodeStatEntrynot-accessiblecurrentEntry for a single counter in the cluster, on a per-node, per-category, per-object basis.
1.3.6.1.4.1.789.1.2.10.1.1.1ColumnnodeStatNodenot-accessiblecurrentNode from which the counter is collected.
1.3.6.1.4.1.789.1.2.10.1.1.2ColumnnodeStatCategoryIndexnot-accessiblecurrentIndex of category.
1.3.6.1.4.1.789.1.2.10.1.1.3ColumnnodeStatInstanceIndexnot-accessiblecurrentIndex of instance on which the counter exists.
1.3.6.1.4.1.789.1.2.10.1.1.4ColumnnodeStatCounterIndexnot-accessiblecurrentIndex of counter within this category.
1.3.6.1.4.1.789.1.2.10.1.1.5ColumnnodeStatValueread-onlycurrentThe value of the counter.
1.3.6.1.4.1.789.1.2.10.1.1.6ColumnnodeStatUnitsread-onlycurrentUnits for this counter. Possible values include: 'B' (bytes), 's' (seconds), 'ms' (milliseconds), 'us' (microseconds), '%' (percent), or '' (none).
1.3.6.1.4.1.789.1.2.10.1.1.7ColumnnodeStatDescriptionread-onlycurrentDescription of this counter.
1.3.6.1.4.1.789.1.2.10.1.1.8ColumnnodeStatPropertiesread-onlycurrentCounter properties. Possible values include: 'average', 'rate', 'delta', 'percent', ''.
1.3.6.1.4.1.789.1.2.10.1.1.9ColumnnodeStatCategoryNameread-onlycurrentName of counter's category.
1.3.6.1.4.1.789.1.2.10.1.1.10ColumnnodeStatInstanceNameread-onlycurrentName of counter's category instance.
1.3.6.1.4.1.789.1.2.10.1.1.11ColumnnodeStatCounterNameread-onlycurrentName of counter within this category.
1.3.6.1.4.1.789.1.2.10.1.1.12ColumnnodeStatLabelsread-onlycurrentList of counter labels. Used for counter arrays of if 'counter' value is not an integer.
1.3.6.1.4.1.789.1.2.10.1.1.13ColumnnodeStatValuesread-onlycurrentList of values. Only used to for counter arrays.
1.3.6.1.4.1.789.1.3Nodenfs
1.3.6.1.4.1.789.1.3.1NodecurNfs
1.3.6.1.4.1.789.1.3.1.1NoderpcServ
1.3.6.1.4.1.789.1.3.1.1.1ScalarrpcCallsread-onlycurrentThe total number of RPC calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.2ScalarrpcBadCallsread-onlycurrentThe total number of calls rejected by the RPC layer, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.3ScalarrpcNullRecvsread-onlycurrentThe number of times an RPC call was not available when it was thought to be received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.4ScalarrpcBadLensread-onlycurrentThe number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.5ScalarrpcServXDRCallsread-onlycurrentThe number of RPC calls received whose header could not be XDR decoded, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.6ScalarrcpTcpCallsread-onlycurrentThe total number of RPC calls received for the TCP protocol, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.7ScalarrcpTcpBadCallsread-onlycurrentThe total number of calls rejected by the RPC layer for the TCP protocol, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.8ScalarrcpTcpNullRecvsread-onlycurrentThe number of times an RPC call for the TCP protocol was not available when it was thought to be received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.9ScalarrcpTcpBadLensread-onlycurrentThe number of RPC calls for the TCP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.10ScalarrcpTcpServXDRCallsread-onlycurrentThe number of RPC calls for the TCP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.11ScalarrpcUdpCallsread-onlycurrentThe total number of RPC calls received for the UDP protocol, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.12ScalarrpcUdpBadCallsread-onlycurrentThe total number of calls rejected by the RPC layer for the UDP protocol, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.13ScalarrpcUdpNullRecvsread-onlycurrentThe number of times an RPC call for the UDP protocol was not available when it was thought to be received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.14ScalarrpcUdpBadLensread-onlycurrentThe number of RPC calls for the UDP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.1.15ScalarrpcUdpServXDRCallsread-onlycurrentThe number of RPC calls for the UDP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2NodenfsServ
1.3.6.1.4.1.789.1.3.1.2.1ScalarnfsCallsread-onlycurrentThe total number of NFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.2ScalarnfsServBadCallsread-onlycurrentThe total number of received NFS calls rejected, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3NodenfsV2
1.3.6.1.4.1.789.1.3.1.2.3.1Nodev2Calls
1.3.6.1.4.1.789.1.3.1.2.3.1.1Scalarv2cNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.2Scalarv2cGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.3Scalarv2cSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.4Scalarv2cRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.5Scalarv2cLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.6Scalarv2cReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.7Scalarv2cReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.8Scalarv2cWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.9Scalarv2cWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.10Scalarv2cCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.11Scalarv2cRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.12Scalarv2cRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.13Scalarv2cLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.14Scalarv2cSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.15Scalarv2cMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.16Scalarv2cRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.17Scalarv2cReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.1.18Scalarv2cStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.3.2Nodev2Percent
1.3.6.1.4.1.789.1.3.1.2.3.2.1Scalarv2pNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last time the sta…
1.3.6.1.4.1.789.1.3.1.2.3.2.2Scalarv2pGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last …
1.3.6.1.4.1.789.1.3.1.2.3.2.3Scalarv2pSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last …
1.3.6.1.4.1.789.1.3.1.2.3.2.4Scalarv2pRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last tim…
1.3.6.1.4.1.789.1.3.1.2.3.2.5Scalarv2pLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last tim…
1.3.6.1.4.1.789.1.3.1.2.3.2.6Scalarv2pReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the …
1.3.6.1.4.1.789.1.3.1.2.3.2.7Scalarv2pReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last time the…
1.3.6.1.4.1.789.1.3.1.2.3.2.8Scalarv2pWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last ti…
1.3.6.1.4.1.789.1.3.1.2.3.2.9Scalarv2pWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last time the…
1.3.6.1.4.1.789.1.3.1.2.3.2.10Scalarv2pCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last time the …
1.3.6.1.4.1.789.1.3.1.2.3.2.11Scalarv2pRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last time the …
1.3.6.1.4.1.789.1.3.1.2.3.2.12Scalarv2pRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last time the …
1.3.6.1.4.1.789.1.3.1.2.3.2.13Scalarv2pLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last tim…
1.3.6.1.4.1.789.1.3.1.2.3.2.14Scalarv2pSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last…
1.3.6.1.4.1.789.1.3.1.2.3.2.15Scalarv2pMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last time …
1.3.6.1.4.1.789.1.3.1.2.3.2.16Scalarv2pRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last time …
1.3.6.1.4.1.789.1.3.1.2.3.2.17Scalarv2pReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last …
1.3.6.1.4.1.789.1.3.1.2.3.2.18Scalarv2pStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the …
1.3.6.1.4.1.789.1.3.1.2.3.3Nodev2CachedCalls
1.3.6.1.4.1.789.1.3.1.2.3.3.1Scalarv2ccNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since…
1.3.6.1.4.1.789.1.3.1.2.3.3.2Scalarv2ccGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.1.2.3.3.3Scalarv2ccSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.1.2.3.3.4Scalarv2ccRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.1.2.3.3.5Scalarv2ccLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.1.2.3.3.6Scalarv2ccReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.1.2.3.3.7Scalarv2ccReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, s…
1.3.6.1.4.1.789.1.3.1.2.3.3.8Scalarv2ccWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.1.2.3.3.9Scalarv2ccWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, s…
1.3.6.1.4.1.789.1.3.1.2.3.3.10Scalarv2ccCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, si…
1.3.6.1.4.1.789.1.3.1.2.3.3.11Scalarv2ccRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, si…
1.3.6.1.4.1.789.1.3.1.2.3.3.12Scalarv2ccRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, si…
1.3.6.1.4.1.789.1.3.1.2.3.3.13Scalarv2ccLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.1.2.3.3.14Scalarv2ccSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.3.3.15Scalarv2ccMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.1.2.3.3.16Scalarv2ccRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.1.2.3.3.17Scalarv2ccReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.1.2.3.3.18Scalarv2ccStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.1.2.3.4Nodev2CachedPerCent
1.3.6.1.4.1.789.1.3.1.2.3.4.1Scalarv2cpNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a …
1.3.6.1.4.1.789.1.3.1.2.3.4.2Scalarv2cpGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.1.2.3.4.3Scalarv2cpSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.1.2.3.4.4Scalarv2cpRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.1.2.3.4.5Scalarv2cpLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.1.2.3.4.6Scalarv2cpReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.1.2.3.4.7Scalarv2cpReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, a…
1.3.6.1.4.1.789.1.3.1.2.3.4.8Scalarv2cpWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.1.2.3.4.9Scalarv2cpWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, a…
1.3.6.1.4.1.789.1.3.1.2.3.4.10Scalarv2cpCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as…
1.3.6.1.4.1.789.1.3.1.2.3.4.11Scalarv2cpRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as…
1.3.6.1.4.1.789.1.3.1.2.3.4.12Scalarv2cpRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as…
1.3.6.1.4.1.789.1.3.1.2.3.4.13Scalarv2cpLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.1.2.3.4.14Scalarv2cpSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.3.4.15Scalarv2cpMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.1.2.3.4.16Scalarv2cpRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.1.2.3.4.17Scalarv2cpReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.1.2.3.4.18Scalarv2cpStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.1.2.4NodenfsV3
1.3.6.1.4.1.789.1.3.1.2.4.1Nodev3Calls
1.3.6.1.4.1.789.1.3.1.2.4.1.1Scalarv3cNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.2Scalarv3cGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.3Scalarv3cSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.4Scalarv3cLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.5Scalarv3cAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.6Scalarv3cReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.7Scalarv3cReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.8Scalarv3cWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.9Scalarv3cCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.10Scalarv3cMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.11Scalarv3cSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.12Scalarv3cMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.13Scalarv3cRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.14Scalarv3cRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.15Scalarv3cRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.16Scalarv3cLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.17Scalarv3cReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.18Scalarv3cReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last time the statistics were clear…
1.3.6.1.4.1.789.1.3.1.2.4.1.19Scalarv3cFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last time the statistics were cle…
1.3.6.1.4.1.789.1.3.1.2.4.1.20Scalarv3cFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last time the statistics were clea…
1.3.6.1.4.1.789.1.3.1.2.4.1.21Scalarv3cPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.4.1.22Scalarv3cCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last time the statis…
1.3.6.1.4.1.789.1.3.1.2.4.2Nodev3Percent
1.3.6.1.4.1.789.1.3.1.2.4.2.1Scalarv3pNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last time t…
1.3.6.1.4.1.789.1.3.1.2.4.2.2Scalarv3pGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the…
1.3.6.1.4.1.789.1.3.1.2.4.2.3Scalarv3pSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the…
1.3.6.1.4.1.789.1.3.1.2.4.2.4Scalarv3pLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last…
1.3.6.1.4.1.789.1.3.1.2.4.2.5Scalarv3pAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since …
1.3.6.1.4.1.789.1.3.1.2.4.2.6Scalarv3pReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, sinc…
1.3.6.1.4.1.789.1.3.1.2.4.2.7Scalarv3pReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last ti…
1.3.6.1.4.1.789.1.3.1.2.4.2.8Scalarv3pWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last ti…
1.3.6.1.4.1.789.1.3.1.2.4.2.9Scalarv3pCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last t…
1.3.6.1.4.1.789.1.3.1.2.4.2.10Scalarv3pMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the la…
1.3.6.1.4.1.789.1.3.1.2.4.2.11Scalarv3pSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since …
1.3.6.1.4.1.789.1.3.1.2.4.2.12Scalarv3pMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since t…
1.3.6.1.4.1.789.1.3.1.2.4.2.13Scalarv3pRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last t…
1.3.6.1.4.1.789.1.3.1.2.4.2.14Scalarv3pRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the la…
1.3.6.1.4.1.789.1.3.1.2.4.2.15Scalarv3pRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, sin…
1.3.6.1.4.1.789.1.3.1.2.4.2.16Scalarv3pLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since t…
1.3.6.1.4.1.789.1.3.1.2.4.2.17Scalarv3pReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the…
1.3.6.1.4.1.789.1.3.1.2.4.2.18Scalarv3pReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls receiv…
1.3.6.1.4.1.789.1.3.1.2.4.2.19Scalarv3pFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls rece…
1.3.6.1.4.1.789.1.3.1.2.4.2.20Scalarv3pFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls recei…
1.3.6.1.4.1.789.1.3.1.2.4.2.21Scalarv3pPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, s…
1.3.6.1.4.1.789.1.3.1.2.4.2.22Scalarv3pCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total N…
1.3.6.1.4.1.789.1.3.1.2.4.3Nodev3CachedCalls
1.3.6.1.4.1.789.1.3.1.2.4.3.1Scalarv3ccNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, sinc…
1.3.6.1.4.1.789.1.3.1.2.4.3.2Scalarv3ccGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.4.3.3Scalarv3ccSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.4.3.4Scalarv3ccLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from dis…
1.3.6.1.4.1.789.1.3.1.2.4.3.5Scalarv3ccAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.1.2.4.3.6Scalarv3ccReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to rea…
1.3.6.1.4.1.789.1.3.1.2.4.3.7Scalarv3ccReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.1.2.4.3.8Scalarv3ccWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.1.2.4.3.9Scalarv3ccCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.1.2.4.3.10Scalarv3ccMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.1.2.4.3.11Scalarv3ccSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.1.2.4.3.12Scalarv3ccMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.1.2.4.3.13Scalarv3ccRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.1.2.4.3.14Scalarv3ccRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.1.2.4.3.15Scalarv3ccRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to re…
1.3.6.1.4.1.789.1.3.1.2.4.3.16Scalarv3ccLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.1.2.4.3.17Scalarv3ccReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.4.3.18Scalarv3ccReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blockin…
1.3.6.1.4.1.789.1.3.1.2.4.3.19Scalarv3ccFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem block…
1.3.6.1.4.1.789.1.3.1.2.4.3.20Scalarv3ccFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocki…
1.3.6.1.4.1.789.1.3.1.2.4.3.21Scalarv3ccPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to …
1.3.6.1.4.1.789.1.3.1.2.4.3.22Scalarv3ccCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the fil…
1.3.6.1.4.1.789.1.3.1.2.4.4Nodev3CachedPerCent
1.3.6.1.4.1.789.1.3.1.2.4.4.1Scalarv3cpNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a…
1.3.6.1.4.1.789.1.3.1.2.4.4.2Scalarv3cpGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.4.4.3Scalarv3cpSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.4.4.4Scalarv3cpLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from dis…
1.3.6.1.4.1.789.1.3.1.2.4.4.5Scalarv3cpAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.1.2.4.4.6Scalarv3cpReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to rea…
1.3.6.1.4.1.789.1.3.1.2.4.4.7Scalarv3cpReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.1.2.4.4.8Scalarv3cpWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.1.2.4.4.9Scalarv3cpCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.1.2.4.4.10Scalarv3cpMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.1.2.4.4.11Scalarv3cpSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.1.2.4.4.12Scalarv3cpMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.1.2.4.4.13Scalarv3cpRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.1.2.4.4.14Scalarv3cpRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.1.2.4.4.15Scalarv3cpRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to re…
1.3.6.1.4.1.789.1.3.1.2.4.4.16Scalarv3cpLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.1.2.4.4.17Scalarv3cpReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.1.2.4.4.18Scalarv3cpReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blockin…
1.3.6.1.4.1.789.1.3.1.2.4.4.19Scalarv3cpFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem block…
1.3.6.1.4.1.789.1.3.1.2.4.4.20Scalarv3cpFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocki…
1.3.6.1.4.1.789.1.3.1.2.4.4.21Scalarv3cpPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to …
1.3.6.1.4.1.789.1.3.1.2.4.4.22Scalarv3cpCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the fil…
1.3.6.1.4.1.789.1.3.1.2.5NodereplyCache
1.3.6.1.4.1.789.1.3.1.2.5.1ScalarrcInProgressHitsread-onlycurrentThe number of NFS requests that were dropped, for calls already in progress, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.5.2ScalarrcDelayHitsread-onlydeprecatedThe number of NFS requests that were dropped, for replies already generated within a short interval, since the last time the statistics were cleared. These sta…
1.3.6.1.4.1.789.1.3.1.2.5.3ScalarrcMissesread-onlycurrentThe number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.5.4ScalarrcNonIdemDoneHitsread-onlycurrentThe number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.5.5ScalarrcNonIdemNotDoneHitsread-onlycurrentThe number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Rep…
1.3.6.1.4.1.789.1.3.1.2.5.6ScalarrcTcpInProgressHitsread-onlycurrentThe number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.5.7ScalarrcTcpDelayHitsread-onlydeprecatedThe number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last time the statistics we…
1.3.6.1.4.1.789.1.3.1.2.5.8ScalarrcTcpMissesread-onlycurrentThe number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the stat…
1.3.6.1.4.1.789.1.3.1.2.5.9ScalarrcTcpNonIdemDoneHitsread-onlycurrentThe number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were …
1.3.6.1.4.1.789.1.3.1.2.5.10ScalarrcTcpNonIdemNotDoneHitsread-onlycurrentThe number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding ent…
1.3.6.1.4.1.789.1.3.1.2.5.11ScalarrcUdpInProgressHitsread-onlycurrentThe number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.2.5.12ScalarrcUdpDelayHitsread-onlydeprecatedThe number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last time the statistics we…
1.3.6.1.4.1.789.1.3.1.2.5.13ScalarrcUdpMissesread-onlycurrentThe number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the stat…
1.3.6.1.4.1.789.1.3.1.2.5.14ScalarrcUdpNonIdemDoneHitsread-onlycurrentThe number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were …
1.3.6.1.4.1.789.1.3.1.2.5.15ScalarrcUdpNonIdemNotDoneHitsread-onlycurrentThe number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding ent…
1.3.6.1.4.1.789.1.3.1.2.6NodenfsrwStats
1.3.6.1.4.1.789.1.3.1.2.6.1Nodev2ReadStats
1.3.6.1.4.1.789.1.3.1.2.6.1.1Scalarv2Read512Callsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.2Scalarv2Read1KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.3Scalarv2Read2KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.4Scalarv2Read4KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.5Scalarv2Read8KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.6Scalarv2Read16KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.7Scalarv2Read32KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.8Scalarv2Read64KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.1.9Scalarv2Read128KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2Nodev2WriteStats
1.3.6.1.4.1.789.1.3.1.2.6.2.1Scalarv2Write512Callsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.2Scalarv2Write1KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.3Scalarv2Write2KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.4Scalarv2Write4KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.5Scalarv2Write8KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.6Scalarv2Write16KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.7Scalarv2Write32KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.8Scalarv2Write64KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.2.9Scalarv2Write128KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3Nodev3ReadStats
1.3.6.1.4.1.789.1.3.1.2.6.3.1Scalarv3Read512Callsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.2Scalarv3Read1KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.3Scalarv3Read2KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.4Scalarv3Read4KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.5Scalarv3Read8KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.6Scalarv3Read16KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.7Scalarv3Read32KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.8Scalarv3Read64KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.3.9Scalarv3Read128KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4Nodev3WriteStats
1.3.6.1.4.1.789.1.3.1.2.6.4.1Scalarv3Write512Callsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.2Scalarv3Write1KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.3Scalarv3Write2KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.4Scalarv3Write4KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.5Scalarv3Write8KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.6Scalarv3Write16KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.7Scalarv3Write32KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.8Scalarv3Write64KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.1.2.6.4.9Scalarv3Write128KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.1.3NodenfsPerClient
1.3.6.1.4.1.789.1.3.1.3.1TablepclTablenot-accessiblecurrentProvide a report of per-client NFS statistics since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1RowpclEntrynot-accessiblecurrentProvide a report of NFS statistics for the referenced NFS client since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1.1ColumnpclIpAddrread-onlycurrentThe IP address of the referenced client.
1.3.6.1.4.1.789.1.3.1.3.1.1.2ColumnpclRpcCallsread-onlycurrentThe total number of RPC calls received from the referenced client, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1.3ColumnpclRpcBadCallsread-onlycurrentThe total number of calls received from the referenced client that were rejected by the RPC layer, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1.4ColumnpclRpcNullRecvsread-onlycurrentThe number of times an RPC call was not available when it was thought to be received from referenced client, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1.5ColumnpclRpcBadLensread-onlycurrentThe number of RPC calls received from the referenced client with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleare…
1.3.6.1.4.1.789.1.3.1.3.1.1.6ColumnpclRpcServXDRCallsread-onlycurrentThe number of RPC calls received from the referenced client whose header could not be XDR decoded, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1.7ColumnpclNfsCallsread-onlycurrentThe total number of NFS calls received from the referenced client, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1.8ColumnpclNfsServBadCallsread-onlycurrentThe total number of NFS calls received from the referenced client that were rejected, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.3.1.3.1.1.9ColumnpclNfsV2Nullsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were clea…
1.3.6.1.4.1.789.1.3.1.3.1.1.10ColumnpclNfsV2Getattrsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statisti…
1.3.6.1.4.1.789.1.3.1.3.1.1.11ColumnpclNfsV2Setattrsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statisti…
1.3.6.1.4.1.789.1.3.1.3.1.1.12ColumnpclNfsV2Rootsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics …
1.3.6.1.4.1.789.1.3.1.3.1.1.13ColumnpclNfsV2Lookupsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics …
1.3.6.1.4.1.789.1.3.1.3.1.1.14ColumnpclNfsV2Readlinksread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the sta…
1.3.6.1.4.1.789.1.3.1.3.1.1.15ColumnpclNfsV2Readsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were …
1.3.6.1.4.1.789.1.3.1.3.1.1.16ColumnpclNfsV2Wrcachesread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics…
1.3.6.1.4.1.789.1.3.1.3.1.1.17ColumnpclNfsV2Writesread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were …
1.3.6.1.4.1.789.1.3.1.3.1.1.18ColumnpclNfsV2Createsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were c…
1.3.6.1.4.1.789.1.3.1.3.1.1.19ColumnpclNfsV2Removesread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were c…
1.3.6.1.4.1.789.1.3.1.3.1.1.20ColumnpclNfsV2Renamesread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were c…
1.3.6.1.4.1.789.1.3.1.3.1.1.21ColumnpclNfsV2Linksread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics …
1.3.6.1.4.1.789.1.3.1.3.1.1.22ColumnpclNfsV2Symlinksread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statist…
1.3.6.1.4.1.789.1.3.1.3.1.1.23ColumnpclNfsV2Mkdirsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics we…
1.3.6.1.4.1.789.1.3.1.3.1.1.24ColumnpclNfsV2Rmdirsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics we…
1.3.6.1.4.1.789.1.3.1.3.1.1.25ColumnpclNfsV2Readdirsread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statisti…
1.3.6.1.4.1.789.1.3.1.3.1.1.26ColumnpclNfsV2Statfssread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the sta…
1.3.6.1.4.1.789.1.3.1.3.1.1.27ColumnpclNfsV3Nullsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cle…
1.3.6.1.4.1.789.1.3.1.3.1.1.28ColumnpclNfsV3Getattrsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statist…
1.3.6.1.4.1.789.1.3.1.3.1.1.29ColumnpclNfsV3Setattrsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statist…
1.3.6.1.4.1.789.1.3.1.3.1.1.30ColumnpclNfsV3Lookupsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics w…
1.3.6.1.4.1.789.1.3.1.3.1.1.31ColumnpclNfsV3Accesssread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the stat…
1.3.6.1.4.1.789.1.3.1.3.1.1.32ColumnpclNfsV3Readlinksread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the st…
1.3.6.1.4.1.789.1.3.1.3.1.1.33ColumnpclNfsV3Readsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were…
1.3.6.1.4.1.789.1.3.1.3.1.1.34ColumnpclNfsV3Writesread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were…
1.3.6.1.4.1.789.1.3.1.3.1.1.35ColumnpclNfsV3Createsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics wer…
1.3.6.1.4.1.789.1.3.1.3.1.1.36ColumnpclNfsV3Mkdirsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics…
1.3.6.1.4.1.789.1.3.1.3.1.1.37ColumnpclNfsV3Symlinksread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the stat…
1.3.6.1.4.1.789.1.3.1.3.1.1.38ColumnpclNfsV3Mknodsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the stati…
1.3.6.1.4.1.789.1.3.1.3.1.1.39ColumnpclNfsV3Removesread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics wer…
1.3.6.1.4.1.789.1.3.1.3.1.1.40ColumnpclNfsV3Rmdirsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics…
1.3.6.1.4.1.789.1.3.1.3.1.1.41ColumnpclNfsV3Renamesread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the s…
1.3.6.1.4.1.789.1.3.1.3.1.1.42ColumnpclNfsV3Linksread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the stati…
1.3.6.1.4.1.789.1.3.1.3.1.1.43ColumnpclNfsV3Readdirsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statist…
1.3.6.1.4.1.789.1.3.1.3.1.1.44ColumnpclNfsV3ReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last tim…
1.3.6.1.4.1.789.1.3.1.3.1.1.45ColumnpclNfsV3Fsstatsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last t…
1.3.6.1.4.1.789.1.3.1.3.1.1.46ColumnpclNfsV3Fsinfosread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last ti…
1.3.6.1.4.1.789.1.3.1.3.1.1.47ColumnpclNfsV3Pathconfsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the…
1.3.6.1.4.1.789.1.3.1.3.1.1.48ColumnpclNfsV3Commitsread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, sin…
1.3.6.1.4.1.789.1.3.1.3.1.1.49ColumnpclPerCentread-onlycurrentThe number of the total NFS calls for the referenced client as a percentage of the total NFS calls received from all clients, since the last time the statistic…
1.3.6.1.4.1.789.1.3.1.3.1.1.50ColumnpclNfsV2NullPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, as a percentage of the total calls received …
1.3.6.1.4.1.789.1.3.1.3.1.1.51ColumnpclNfsV2GetattrPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, as a percentage of the total cal…
1.3.6.1.4.1.789.1.3.1.3.1.1.52ColumnpclNfsV2SetattrPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, as a percentage of the total cal…
1.3.6.1.4.1.789.1.3.1.3.1.1.53ColumnpclNfsV2RootPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, as a percentage of the total calls …
1.3.6.1.4.1.789.1.3.1.3.1.1.54ColumnpclNfsV2LookupPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, as a percentage of the total calls …
1.3.6.1.4.1.789.1.3.1.3.1.1.55ColumnpclNfsV2ReadlinkPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, as a percentage of the tota…
1.3.6.1.4.1.789.1.3.1.3.1.1.56ColumnpclNfsV2ReadPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, as a percentage of the total calls recei…
1.3.6.1.4.1.789.1.3.1.3.1.1.57ColumnpclNfsV2WrcachePerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, as a percentage of the total calls…
1.3.6.1.4.1.789.1.3.1.3.1.1.58ColumnpclNfsV2WritePerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, as a percentage of the total calls recei…
1.3.6.1.4.1.789.1.3.1.3.1.1.59ColumnpclNfsV2CreatePerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, as a percentage of the total calls receiv…
1.3.6.1.4.1.789.1.3.1.3.1.1.60ColumnpclNfsV2RemovePerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, as a percentage of the total calls receiv…
1.3.6.1.4.1.789.1.3.1.3.1.1.61ColumnpclNfsV2RenamePerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, as a percentage of the total calls receiv…
1.3.6.1.4.1.789.1.3.1.3.1.1.62ColumnpclNfsV2LinkPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, as a percentage of the total calls …
1.3.6.1.4.1.789.1.3.1.3.1.1.63ColumnpclNfsV2SymlinkPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, as a percentage of the total ca…
1.3.6.1.4.1.789.1.3.1.3.1.1.64ColumnpclNfsV2MkdirPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, as a percentage of the total calls re…
1.3.6.1.4.1.789.1.3.1.3.1.1.65ColumnpclNfsV2RmdirPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, as a percentage of the total calls re…
1.3.6.1.4.1.789.1.3.1.3.1.1.66ColumnpclNfsV2ReaddirPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, as a percentage of the total cal…
1.3.6.1.4.1.789.1.3.1.3.1.1.67ColumnpclNfsV2StatfsPerCentread-onlycurrentThe number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, as a percentage of the tota…
1.3.6.1.4.1.789.1.3.1.3.1.1.68ColumnpclNfsV3NullPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total calls received…
1.3.6.1.4.1.789.1.3.1.3.1.1.69ColumnpclNfsV3GetattrPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total ca…
1.3.6.1.4.1.789.1.3.1.3.1.1.70ColumnpclNfsV3SetattrPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total ca…
1.3.6.1.4.1.789.1.3.1.3.1.1.71ColumnpclNfsV3LookupPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total calls r…
1.3.6.1.4.1.789.1.3.1.3.1.1.72ColumnpclNfsV3AccessPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total…
1.3.6.1.4.1.789.1.3.1.3.1.1.73ColumnpclNfsV3ReadlinkPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the tot…
1.3.6.1.4.1.789.1.3.1.3.1.1.74ColumnpclNfsV3ReadPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total calls rece…
1.3.6.1.4.1.789.1.3.1.3.1.1.75ColumnpclNfsV3WritePerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total calls rece…
1.3.6.1.4.1.789.1.3.1.3.1.1.76ColumnpclNfsV3CreatePerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total calls rec…
1.3.6.1.4.1.789.1.3.1.3.1.1.77ColumnpclNfsV3MkdirPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total calls…
1.3.6.1.4.1.789.1.3.1.3.1.1.78ColumnpclNfsV3SymlinkPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total…
1.3.6.1.4.1.789.1.3.1.3.1.1.79ColumnpclNfsV3MknodPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total …
1.3.6.1.4.1.789.1.3.1.3.1.1.80ColumnpclNfsV3RemovePerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total calls rec…
1.3.6.1.4.1.789.1.3.1.3.1.1.81ColumnpclNfsV3RmdirPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total calls…
1.3.6.1.4.1.789.1.3.1.3.1.1.82ColumnpclNfsV3RenamePerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the to…
1.3.6.1.4.1.789.1.3.1.3.1.1.83ColumnpclNfsV3LinkPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total …
1.3.6.1.4.1.789.1.3.1.3.1.1.84ColumnpclNfsV3ReaddirPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total ca…
1.3.6.1.4.1.789.1.3.1.3.1.1.85ColumnpclNfsV3ReaddirPlusPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of…
1.3.6.1.4.1.789.1.3.1.3.1.1.86ColumnpclNfsV3FsstatPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage …
1.3.6.1.4.1.789.1.3.1.3.1.1.87ColumnpclNfsV3FsinfoPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage o…
1.3.6.1.4.1.789.1.3.1.3.1.1.88ColumnpclNfsV3PathconfPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the …
1.3.6.1.4.1.789.1.3.1.3.1.1.89ColumnpclNfsV3CommitPerCentread-onlycurrentThe number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as …
1.3.6.1.4.1.789.1.3.1.3.1.1.90ColumnpclNfsV2Read512Callsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 0-511 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.91ColumnpclNfsV2Read1KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 512-1023 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.92ColumnpclNfsV2Read2KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 1K-2047 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.93ColumnpclNfsV2Read4KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 2K-4095 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.94ColumnpclNfsV2Read8KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 4K-8191 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.95ColumnpclNfsV2Read16KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 8K-16383 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.96ColumnpclNfsV2Read32KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 16K-32767 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.97ColumnpclNfsV2Read64KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 32K-65535 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.98ColumnpclNfsV2Read128KCallsread-onlycurrentThe number of NFS Version 2 read calls with request sizes between 64K-131071 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.99ColumnpclNfsV2Write512Callsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 0-511 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.100ColumnpclNfsV2Write1KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 512-1023 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.101ColumnpclNfsV2Write2KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 1K-2047 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.102ColumnpclNfsV2Write4KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 2K-4095 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.103ColumnpclNfsV2Write8KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 4K-8191 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.104ColumnpclNfsV2Write16KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 8K-16383 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.105ColumnpclNfsV2Write32KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 16K-32767 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.106ColumnpclNfsV2Write64KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 32K-65535 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.107ColumnpclNfsV2Write128KCallsread-onlycurrentThe number of NFS Version 2 write calls with request sizes between 64K-131071 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.108ColumnpclNfsV3Read512Callsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 0-511 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.109ColumnpclNfsV3Read1KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 512-1023 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.110ColumnpclNfsV3Read2KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 1K-2047 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.111ColumnpclNfsV3Read4KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 2K-4095 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.112ColumnpclNfsV3Read8KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 4K-8191 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.113ColumnpclNfsV3Read16KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 8K-16383 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.114ColumnpclNfsV3Read32KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 16K-32767 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.115ColumnpclNfsV3Read64KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 32K-65535 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.116ColumnpclNfsV3Read128KCallsread-onlycurrentThe number of NFS Version 3 read calls with request sizes between 64K-131071 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.117ColumnpclNfsV3Write512Callsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 0-511 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.118ColumnpclNfsV3Write1KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 512-1023 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.119ColumnpclNfsV3Write2KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 1K-2047 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.120ColumnpclNfsV3Write4KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 2K-4095 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.121ColumnpclNfsV3Write8KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 4K-8191 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.122ColumnpclNfsV3Write16KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 8K-16383 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.123ColumnpclNfsV3Write32KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 16K-32767 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.124ColumnpclNfsV3Write64KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 32K-65535 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.1.1.125ColumnpclNfsV3Write128KCallsread-onlycurrentThe number of NFS Version 3 write calls with request sizes between 64K-131071 bytes received from this client.
1.3.6.1.4.1.789.1.3.1.3.2ScalarpclNumberread-onlycurrentNumber of entries in the pclTable table.
1.3.6.1.4.1.789.1.3.2NodetotNfs
1.3.6.1.4.1.789.1.3.2.1NodetrpcServ
1.3.6.1.4.1.789.1.3.2.1.1ScalartrpcCallsread-onlycurrentThe total number of RPC calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.1.2ScalartrpcBadCallsread-onlycurrentThe total number of calls rejected by the RPC layer, since the last boot.
1.3.6.1.4.1.789.1.3.2.1.3ScalartrpcNullRecvsread-onlycurrentThe number of times an RPC call was not available when it was thought to be received, since the last boot.
1.3.6.1.4.1.789.1.3.2.1.4ScalartrpcBadLensread-onlycurrentThe number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last boot.
1.3.6.1.4.1.789.1.3.2.1.5ScalartrpcServXDRCallsread-onlycurrentThe number of RPC calls received whose header could not be XDR decoded, since the last boot.
1.3.6.1.4.1.789.1.3.2.2NodetnfsServ
1.3.6.1.4.1.789.1.3.2.2.1ScalartnfsCallsread-onlycurrentThe total number of NFS calls received, since last boot.
1.3.6.1.4.1.789.1.3.2.2.2ScalartnfsServBadCallsread-onlycurrentThe total number of received NFS calls rejected, since last boot.
1.3.6.1.4.1.789.1.3.2.2.3NodetnfsV2
1.3.6.1.4.1.789.1.3.2.2.3.1Nodetv2Calls
1.3.6.1.4.1.789.1.3.2.2.3.1.1Scalartv2cNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.2Scalartv2cGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.3Scalartv2cSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.4Scalartv2cRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.5Scalartv2cLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.6Scalartv2cReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.7Scalartv2cReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.8Scalartv2cWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.9Scalartv2cWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.10Scalartv2cCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.11Scalartv2cRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.12Scalartv2cRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.13Scalartv2cLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.14Scalartv2cSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.15Scalartv2cMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.16Scalartv2cRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.17Scalartv2cReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.1.18Scalartv2cStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2Nodetv2Percent
1.3.6.1.4.1.789.1.3.2.2.3.2.1Scalartv2pNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.2Scalartv2pGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last …
1.3.6.1.4.1.789.1.3.2.2.3.2.3Scalartv2pSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last …
1.3.6.1.4.1.789.1.3.2.2.3.2.4Scalartv2pRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last boo…
1.3.6.1.4.1.789.1.3.2.2.3.2.5Scalartv2pLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last boo…
1.3.6.1.4.1.789.1.3.2.2.3.2.6Scalartv2pReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the …
1.3.6.1.4.1.789.1.3.2.2.3.2.7Scalartv2pReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.8Scalartv2pWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last bo…
1.3.6.1.4.1.789.1.3.2.2.3.2.9Scalartv2pWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.10Scalartv2pCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.11Scalartv2pRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.12Scalartv2pRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.13Scalartv2pLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last boo…
1.3.6.1.4.1.789.1.3.2.2.3.2.14Scalartv2pSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last…
1.3.6.1.4.1.789.1.3.2.2.3.2.15Scalartv2pMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.16Scalartv2pRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.3.2.17Scalartv2pReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last …
1.3.6.1.4.1.789.1.3.2.2.3.2.18Scalartv2pStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the …
1.3.6.1.4.1.789.1.3.2.2.3.3Nodetv2CachedCalls
1.3.6.1.4.1.789.1.3.2.2.3.3.1Scalartv2ccNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since…
1.3.6.1.4.1.789.1.3.2.2.3.3.2Scalartv2ccGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.2.2.3.3.3Scalartv2ccSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.2.2.3.3.4Scalartv2ccRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.2.2.3.3.5Scalartv2ccLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.2.2.3.3.6Scalartv2ccReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.2.2.3.3.7Scalartv2ccReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, s…
1.3.6.1.4.1.789.1.3.2.2.3.3.8Scalartv2ccWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.2.2.3.3.9Scalartv2ccWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, s…
1.3.6.1.4.1.789.1.3.2.2.3.3.10Scalartv2ccCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, si…
1.3.6.1.4.1.789.1.3.2.2.3.3.11Scalartv2ccRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, si…
1.3.6.1.4.1.789.1.3.2.2.3.3.12Scalartv2ccRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, si…
1.3.6.1.4.1.789.1.3.2.2.3.3.13Scalartv2ccLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.2.2.3.3.14Scalartv2ccSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.3.3.15Scalartv2ccMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.2.2.3.3.16Scalartv2ccRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.2.2.3.3.17Scalartv2ccReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.2.2.3.3.18Scalartv2ccStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.2.2.3.4Nodetv2CachedPerCent
1.3.6.1.4.1.789.1.3.2.2.3.4.1Scalartv2cpNullsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a …
1.3.6.1.4.1.789.1.3.2.2.3.4.2Scalartv2cpGetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.2.2.3.4.3Scalartv2cpSetattrsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.2.2.3.4.4Scalartv2cpRootsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.2.2.3.4.5Scalartv2cpLookupsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.2.2.3.4.6Scalartv2cpReadlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.2.2.3.4.7Scalartv2cpReadsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, a…
1.3.6.1.4.1.789.1.3.2.2.3.4.8Scalartv2cpWrcachesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.2.2.3.4.9Scalartv2cpWritesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, a…
1.3.6.1.4.1.789.1.3.2.2.3.4.10Scalartv2cpCreatesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as…
1.3.6.1.4.1.789.1.3.2.2.3.4.11Scalartv2cpRemovesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as…
1.3.6.1.4.1.789.1.3.2.2.3.4.12Scalartv2cpRenamesread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as…
1.3.6.1.4.1.789.1.3.2.2.3.4.13Scalartv2cpLinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from di…
1.3.6.1.4.1.789.1.3.2.2.3.4.14Scalartv2cpSymlinksread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.3.4.15Scalartv2cpMkdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.2.2.3.4.16Scalartv2cpRmdirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk…
1.3.6.1.4.1.789.1.3.2.2.3.4.17Scalartv2cpReaddirsread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from…
1.3.6.1.4.1.789.1.3.2.2.3.4.18Scalartv2cpStatfssread-onlycurrentThe number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read…
1.3.6.1.4.1.789.1.3.2.2.4NodetnfsV3
1.3.6.1.4.1.789.1.3.2.2.4.1Nodetv3Calls
1.3.6.1.4.1.789.1.3.2.2.4.1.1Scalartv3cNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.2Scalartv3cGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.3Scalartv3cSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.4Scalartv3cLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.5Scalartv3cAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.6Scalartv3cReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.7Scalartv3cReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.8Scalartv3cWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.9Scalartv3cCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.10Scalartv3cMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.11Scalartv3cSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.12Scalartv3cMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.13Scalartv3cRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.14Scalartv3cRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.15Scalartv3cRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.16Scalartv3cLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.17Scalartv3cReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.18Scalartv3cReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.19Scalartv3cFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.20Scalartv3cFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.21Scalartv3cPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.1.22Scalartv3cCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.2Nodetv3Percent
1.3.6.1.4.1.789.1.3.2.2.4.2.1Scalartv3pNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.4.2.2Scalartv3pGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the…
1.3.6.1.4.1.789.1.3.2.2.4.2.3Scalartv3pSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the…
1.3.6.1.4.1.789.1.3.2.2.4.2.4Scalartv3pLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last…
1.3.6.1.4.1.789.1.3.2.2.4.2.5Scalartv3pAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since …
1.3.6.1.4.1.789.1.3.2.2.4.2.6Scalartv3pReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, sinc…
1.3.6.1.4.1.789.1.3.2.2.4.2.7Scalartv3pReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last bo…
1.3.6.1.4.1.789.1.3.2.2.4.2.8Scalartv3pWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last bo…
1.3.6.1.4.1.789.1.3.2.2.4.2.9Scalartv3pCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last b…
1.3.6.1.4.1.789.1.3.2.2.4.2.10Scalartv3pMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the la…
1.3.6.1.4.1.789.1.3.2.2.4.2.11Scalartv3pSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since …
1.3.6.1.4.1.789.1.3.2.2.4.2.12Scalartv3pMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since t…
1.3.6.1.4.1.789.1.3.2.2.4.2.13Scalartv3pRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last b…
1.3.6.1.4.1.789.1.3.2.2.4.2.14Scalartv3pRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the la…
1.3.6.1.4.1.789.1.3.2.2.4.2.15Scalartv3pRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, sin…
1.3.6.1.4.1.789.1.3.2.2.4.2.16Scalartv3pLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since t…
1.3.6.1.4.1.789.1.3.2.2.4.2.17Scalartv3pReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the…
1.3.6.1.4.1.789.1.3.2.2.4.2.18Scalartv3pReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls receiv…
1.3.6.1.4.1.789.1.3.2.2.4.2.19Scalartv3pFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls rece…
1.3.6.1.4.1.789.1.3.2.2.4.2.20Scalartv3pFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls recei…
1.3.6.1.4.1.789.1.3.2.2.4.2.21Scalartv3pPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, s…
1.3.6.1.4.1.789.1.3.2.2.4.2.22Scalartv3pCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total N…
1.3.6.1.4.1.789.1.3.2.2.4.3Nodetv3CachedCalls
1.3.6.1.4.1.789.1.3.2.2.4.3.1Scalartv3ccNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, sinc…
1.3.6.1.4.1.789.1.3.2.2.4.3.2Scalartv3ccGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.4.3.3Scalartv3ccSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.4.3.4Scalartv3ccLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from dis…
1.3.6.1.4.1.789.1.3.2.2.4.3.5Scalartv3ccAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.2.2.4.3.6Scalartv3ccReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to rea…
1.3.6.1.4.1.789.1.3.2.2.4.3.7Scalartv3ccReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.2.2.4.3.8Scalartv3ccWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.2.2.4.3.9Scalartv3ccCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.2.2.4.3.10Scalartv3ccMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.2.2.4.3.11Scalartv3ccSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.2.2.4.3.12Scalartv3ccMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.2.2.4.3.13Scalartv3ccRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.2.2.4.3.14Scalartv3ccRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.2.2.4.3.15Scalartv3ccRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to re…
1.3.6.1.4.1.789.1.3.2.2.4.3.16Scalartv3ccLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.2.2.4.3.17Scalartv3ccReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.4.3.18Scalartv3ccReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blockin…
1.3.6.1.4.1.789.1.3.2.2.4.3.19Scalartv3ccFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem block…
1.3.6.1.4.1.789.1.3.2.2.4.3.20Scalartv3ccFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocki…
1.3.6.1.4.1.789.1.3.2.2.4.3.21Scalartv3ccPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to …
1.3.6.1.4.1.789.1.3.2.2.4.3.22Scalartv3ccCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the fil…
1.3.6.1.4.1.789.1.3.2.2.4.4Nodetv3CachedPerCent
1.3.6.1.4.1.789.1.3.2.2.4.4.1Scalartv3cpNullsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a…
1.3.6.1.4.1.789.1.3.2.2.4.4.2Scalartv3cpGetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.4.4.3Scalartv3cpSetattrsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.4.4.4Scalartv3cpLookupsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from dis…
1.3.6.1.4.1.789.1.3.2.2.4.4.5Scalartv3cpAccesssread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.2.2.4.4.6Scalartv3cpReadlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to rea…
1.3.6.1.4.1.789.1.3.2.2.4.4.7Scalartv3cpReadsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.2.2.4.4.8Scalartv3cpWritesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, …
1.3.6.1.4.1.789.1.3.2.2.4.4.9Scalartv3cpCreatesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.2.2.4.4.10Scalartv3cpMkdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.2.2.4.4.11Scalartv3cpSymlinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read …
1.3.6.1.4.1.789.1.3.2.2.4.4.12Scalartv3cpMknodsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.2.2.4.4.13Scalartv3cpRemovesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk,…
1.3.6.1.4.1.789.1.3.2.2.4.4.14Scalartv3cpRmdirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from d…
1.3.6.1.4.1.789.1.3.2.2.4.4.15Scalartv3cpRenamesread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to re…
1.3.6.1.4.1.789.1.3.2.2.4.4.16Scalartv3cpLinksread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read f…
1.3.6.1.4.1.789.1.3.2.2.4.4.17Scalartv3cpReaddirsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read fro…
1.3.6.1.4.1.789.1.3.2.2.4.4.18Scalartv3cpReaddirPlussread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_READIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking…
1.3.6.1.4.1.789.1.3.2.2.4.4.19Scalartv3cpFsstatsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem block…
1.3.6.1.4.1.789.1.3.2.2.4.4.20Scalartv3cpFsinfosread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocki…
1.3.6.1.4.1.789.1.3.2.2.4.4.21Scalartv3cpPathconfsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to …
1.3.6.1.4.1.789.1.3.2.2.4.4.22Scalartv3cpCommitsread-onlycurrentThe number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the fil…
1.3.6.1.4.1.789.1.3.2.2.5NodetreplyCache
1.3.6.1.4.1.789.1.3.2.2.5.1ScalartrcInProgressHitsread-onlycurrentThe number of NFS requests that were dropped, for calls already in progress, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.2ScalartrcDelayHitsread-onlydeprecatedThe number of NFS requests that were dropped, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value o…
1.3.6.1.4.1.789.1.3.2.2.5.3ScalartrcMissesread-onlycurrentThe number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.4ScalartrcNonIdemDoneHitsread-onlycurrentThe number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.5ScalartrcNonIdemNotDoneHitsread-onlycurrentThe number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Rep…
1.3.6.1.4.1.789.1.3.2.2.5.6ScalartrcTcpInProgressHitsread-onlycurrentThe number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.7ScalartrcTcpDelayHitsread-onlydeprecatedThe number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last boot. These stats are …
1.3.6.1.4.1.789.1.3.2.2.5.8ScalartrcTcpMissesread-onlycurrentThe number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.9ScalartrcTcpNonIdemDoneHitsread-onlycurrentThe number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.10ScalartrcTcpNonIdemNotDoneHitsread-onlycurrentThe number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding ent…
1.3.6.1.4.1.789.1.3.2.2.5.11ScalartrcUdpInProgressHitsread-onlycurrentThe number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.12ScalartrcUdpDelayHitsread-onlydeprecatedThe number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last boot. These stats are …
1.3.6.1.4.1.789.1.3.2.2.5.13ScalartrcUdpMissesread-onlycurrentThe number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.14ScalartrcUdpNonIdemDoneHitsread-onlycurrentThe number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.
1.3.6.1.4.1.789.1.3.2.2.5.15ScalartrcUdpNonIdemNotDoneHitsread-onlycurrentThe number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding ent…
1.3.6.1.4.1.789.1.3.2.2.6NodetnfsrwStats
1.3.6.1.4.1.789.1.3.2.2.6.1Nodetv2ReadStats
1.3.6.1.4.1.789.1.3.2.2.6.1.1Scalartv2Read512Callsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.2Scalartv2Read1KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.3Scalartv2Read2KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.4Scalartv2Read4KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.5Scalartv2Read8KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.6Scalartv2Read16KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.7Scalartv2Read32KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.8Scalartv2Read64KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.1.9Scalartv2Read128KCallsread-onlycurrentThe number of NFS Version 2 read calls received by the server since last boot with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2Nodetv2WriteStats
1.3.6.1.4.1.789.1.3.2.2.6.2.1Scalartv2Write512Callsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.2Scalartv2Write1KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.3Scalartv2Write2KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.4Scalartv2Write4KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.5Scalartv2Write8KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.6Scalartv2Write16KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.7Scalartv2Write32KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.8Scalartv2Write64KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.2.9Scalartv2Write128KCallsread-onlycurrentThe number of NFS Version 2 write calls received by the server since last boot with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3Nodetv3ReadStats
1.3.6.1.4.1.789.1.3.2.2.6.3.1Scalartv3Read512Callsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.2Scalartv3Read1KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.3Scalartv3Read2KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.4Scalartv3Read4KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.5Scalartv3Read8KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.6Scalartv3Read16KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.7Scalartv3Read32KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.8Scalartv3Read64KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.3.9Scalartv3Read128KCallsread-onlycurrentThe number of NFS Version 3 read calls received by the server since last boot with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4Nodetv3WriteStats
1.3.6.1.4.1.789.1.3.2.2.6.4.1Scalartv3Write512Callsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 0-511 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.2Scalartv3Write1KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 512-1023 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.3Scalartv3Write2KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 1K-2047 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.4Scalartv3Write4KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 2K-4095 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.5Scalartv3Write8KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 4K-8191 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.6Scalartv3Write16KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 8K-16383 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.7Scalartv3Write32KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 16K-32767 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.8Scalartv3Write64KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 32K-65535 bytes.
1.3.6.1.4.1.789.1.3.2.2.6.4.9Scalartv3Write128KCallsread-onlycurrentThe number of NFS Version 3 write calls received by the server since last boot with request sizes between 64K-131071 bytes.
1.3.6.1.4.1.789.1.3.3NodenfsOptions
1.3.6.1.4.1.789.1.3.3.1ScalarnfsIsLicensedread-onlycurrentWhether the nfs protocol is licensed on the filer.
1.3.6.1.4.1.789.1.4Nodequota
1.3.6.1.4.1.789.1.4.1ScalarquotaStateread-onlydeprecatedIndicates whether the root volume's quotas are ON, OFF or initializing. This object is deprecated - use qvStateTable.qvStateStat instead.
1.3.6.1.4.1.789.1.4.2ScalarquotaInitPercentread-onlydeprecatedIndicates percentage of root volume quota computation done while quotas are in initializing state. This object is deprecated - use qvStateTable.qvInitPercent i…
1.3.6.1.4.1.789.1.4.3TableqrTablenot-accessibledeprecatedProvide a report of the current file and space consumption for each user or group with a quota in /etc/quotas. All quotas are displayed regardless of volume, a…
1.3.6.1.4.1.789.1.4.3.1RowqrEntrynot-accessibledeprecatedProvide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. All quotas are displayed regardless of …
1.3.6.1.4.1.789.1.4.3.1.1ColumnqrIndexread-onlydeprecatedA number that identifies this entry in the file /etc/quotas.
1.3.6.1.4.1.789.1.4.3.1.2ColumnqrTyperead-onlydeprecatedIdentifies the kind of quota for this qrEntry.
1.3.6.1.4.1.789.1.4.3.1.3ColumnqrIdread-onlydeprecatedThe UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrEntry.
1.3.6.1.4.1.789.1.4.3.1.4ColumnqrKBytesUsedread-onlydeprecatedThe current number of KBytes used for this qrEntry.
1.3.6.1.4.1.789.1.4.3.1.5ColumnqrKBytesLimitread-onlydeprecatedThe limit of KBytes that can be used for this qrEntry.
1.3.6.1.4.1.789.1.4.3.1.6ColumnqrFilesUsedread-onlydeprecatedThe current number of files used for this qrEntry.
1.3.6.1.4.1.789.1.4.3.1.7ColumnqrFileLimitread-onlydeprecatedThe limit of files that can be used for this qrEntry.
1.3.6.1.4.1.789.1.4.3.1.8ColumnqrPathNameread-onlydeprecatedA textual string that contains the path corresponding to this qrEntry.
1.3.6.1.4.1.789.1.4.4TableqvStateTablenot-accessiblecurrentProvide a report of the current quota state of each volume in the system.
1.3.6.1.4.1.789.1.4.4.1RowqvStateEntrynot-accessiblecurrentProvide a report of the current quota state of each volume in the system.
1.3.6.1.4.1.789.1.4.4.1.1ColumnqvStateVolumeread-onlycurrentA number that identifies this volume. The mapping of this number to actual volumes may change if volumes are added or deleted. Use qvStateName to unambiguously…
1.3.6.1.4.1.789.1.4.4.1.2ColumnqvStateNameread-onlycurrentIndicates the name of this volume.
1.3.6.1.4.1.789.1.4.4.1.3ColumnqvStateStatread-onlycurrentIndicates whether quotas are ON, OFF, initializing or corrupted
1.3.6.1.4.1.789.1.4.4.1.4ColumnqvStateInitPercentread-onlycurrentIndicates percentage of quota computation done while quotas are in initializing state.
1.3.6.1.4.1.789.1.4.4.1.5ColumnqvStateVserverread-onlycurrentIndicates the vserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.
1.3.6.1.4.1.789.1.4.5TableqrVTablenot-accessibledeprecatedProvide a report of the current file and space consumption for each user or group with a quota in /etc/quotas.
1.3.6.1.4.1.789.1.4.5.1RowqrVEntrynot-accessibledeprecatedProvide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota …
1.3.6.1.4.1.789.1.4.5.1.1ColumnqrVIndexread-onlydeprecatedA number that identifies this entry in the file /etc/quotas in the given volume.
1.3.6.1.4.1.789.1.4.5.1.2ColumnqrVTyperead-onlydeprecatedIdentifies the kind of quota for this qrVEntry.
1.3.6.1.4.1.789.1.4.5.1.3ColumnqrVIdread-onlydeprecatedThe UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrVEntry. Check the qrVIdType …
1.3.6.1.4.1.789.1.4.5.1.4ColumnqrVKBytesUsedread-onlydeprecatedThe current number of KBytes used for this qrVEntry.
1.3.6.1.4.1.789.1.4.5.1.5ColumnqrVKBytesLimitread-onlydeprecatedThe limit of KBytes that can be used for this qrVEntry.
1.3.6.1.4.1.789.1.4.5.1.6ColumnqrVFilesUsedread-onlydeprecatedThe current number of files used for this qrVEntry.
1.3.6.1.4.1.789.1.4.5.1.7ColumnqrVFileLimitread-onlydeprecatedThe limit of files that can be used for this qrVEntry.
1.3.6.1.4.1.789.1.4.5.1.8ColumnqrVPathNameread-onlydeprecatedA textual string that contains the path corresponding to this qrVEntry.
1.3.6.1.4.1.789.1.4.5.1.9ColumnqrVVolumeread-onlydeprecatedA number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvSt…
1.3.6.1.4.1.789.1.4.5.1.10ColumnqrVTreeread-onlydeprecatedA string that indicates which qtree this quota belongs to.
1.3.6.1.4.1.789.1.4.5.1.11ColumnqrVIdTyperead-onlydeprecatedA value that indicates which ID field is valid.
1.3.6.1.4.1.789.1.4.5.1.12ColumnqrVSidread-onlydeprecatedThe one or more IDs associated with this qrVEntry. If the qrVentry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the q…
1.3.6.1.4.1.789.1.4.5.1.13ColumnqrVKBytesThresholdread-onlydeprecatedA number of KBytes that when used by this entry produces a warning message.
1.3.6.1.4.1.789.1.4.5.1.14ColumnqrVKBytesLimitSoftread-onlydeprecatedThe limit of KBytes that can be used for this qrVEntry before a warning message and SNMP trap is produced.
1.3.6.1.4.1.789.1.4.5.1.15ColumnqrVFileLimitSoftread-onlydeprecatedThe limit of files that can be used for this qrVEntry before a warning message and SNMP trap is produced.
1.3.6.1.4.1.789.1.4.6TableqrV2Tablenot-accessiblecurrentProvide a report of the current file and space consumption for each user or group with a quota in /etc/quotas.
1.3.6.1.4.1.789.1.4.6.1RowqrV2Entrynot-accessiblecurrentProvide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota …
1.3.6.1.4.1.789.1.4.6.1.1ColumnqrV2Indexread-onlycurrentA number that identifies this entry in the file /etc/quotas in the given volume.
1.3.6.1.4.1.789.1.4.6.1.2ColumnqrV2Typeread-onlycurrentIdentifies the kind of quota for this qrV2Entry.
1.3.6.1.4.1.789.1.4.6.1.3ColumnqrV2Idread-onlycurrentThe UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrV2Entry. Check the qrV2IdTyp…
1.3.6.1.4.1.789.1.4.6.1.4ColumnqrV2HighKBytesUsedread-onlydeprecatedThe current number of KBytes used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecate…
1.3.6.1.4.1.789.1.4.6.1.5ColumnqrV2LowKBytesUsedread-onlydeprecatedThe current number of KBytes used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecat…
1.3.6.1.4.1.789.1.4.6.1.6ColumnqrV2QuotaUnlimitedread-onlycurrentThis flag designates whether or not the size based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesLimit OID's are valid, if true(2) t…
1.3.6.1.4.1.789.1.4.6.1.7ColumnqrV2HighKBytesLimitread-onlydeprecatedThe limit of KBytes that can be used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer. This will return 0 if…
1.3.6.1.4.1.789.1.4.6.1.8ColumnqrV2LowKBytesLimitread-onlydeprecatedThe limit of KBytes that can be used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer. This will return 0 i…
1.3.6.1.4.1.789.1.4.6.1.9ColumnqrV2FilesUsedread-onlycurrentThe current number of files used for this qrV2Entry.
1.3.6.1.4.1.789.1.4.6.1.10ColumnqrV2FileQuotaUnlimitedread-onlycurrentThis flag designates whether or not the file based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2FileLimit is valid, if true(2) qrV2FileLim…
1.3.6.1.4.1.789.1.4.6.1.11ColumnqrV2FileLimitread-onlycurrentThe limit of files that can be used for this qrV2Entry.
1.3.6.1.4.1.789.1.4.6.1.12ColumnqrV2PathNameread-onlycurrentA textual string that contains the path corresponding to this qrV2Entry.
1.3.6.1.4.1.789.1.4.6.1.13ColumnqrV2Volumeread-onlycurrentA number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvSt…
1.3.6.1.4.1.789.1.4.6.1.14ColumnqrV2Treeread-onlycurrentA string that indicates which qtree this quota belongs to.
1.3.6.1.4.1.789.1.4.6.1.15ColumnqrV2IdTyperead-onlycurrentA value that indicates which ID field is valid.
1.3.6.1.4.1.789.1.4.6.1.16ColumnqrV2Sidread-onlycurrentThe one or more IDs associated with this qrV2Entry. If the qrV2entry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the…
1.3.6.1.4.1.789.1.4.6.1.17ColumnqrV2ThresholdUnlimitedread-onlycurrentThis flag designates whether or not the size based threshold limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesThreshold OID's are valid, if t…
1.3.6.1.4.1.789.1.4.6.1.18ColumnqrV2HighKBytesThresholdread-onlydeprecatedA number of KBytes that when used by this entry produces a warning message. This object returns the most significant 32 bits of the 64 bit unsigned integer. Th…
1.3.6.1.4.1.789.1.4.6.1.19ColumnqrV2LowKBytesThresholdread-onlydeprecatedA number of KBytes that when used by this entry produces a warning message. This object returns the least significant 32 bits of the 64 bit unsigned integer. T…
1.3.6.1.4.1.789.1.4.6.1.20ColumnqrV2SoftQuotaUnlimitedread-onlycurrentThis flag designates whether or not the size based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesSoftLimit OID's are valid, if …
1.3.6.1.4.1.789.1.4.6.1.21ColumnqrV2HighKBytesSoftLimitread-onlydeprecatedThe limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the most significant 32 bits of…
1.3.6.1.4.1.789.1.4.6.1.22ColumnqrV2LowKBytesSoftLimitread-onlydeprecatedThe limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the least significant 32 bits o…
1.3.6.1.4.1.789.1.4.6.1.23ColumnqrV2SoftFileQuotaUnlimitedread-onlycurrentThis flag designates whether or not the file based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2SoftFileLimit is valid, if true(2) qr…
1.3.6.1.4.1.789.1.4.6.1.24ColumnqrV2SoftFileLimitread-onlycurrentThe limit of files that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This will return 0 if qrV2SoftFileQuotaUnlimited is …
1.3.6.1.4.1.789.1.4.6.1.25ColumnqrV264KBytesUsedread-onlycurrentThe current number of KBytes used for this qrV2Entry. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.4.6.1.26ColumnqrV264KBytesLimitread-onlycurrentThe limit of KBytes that can be used for this qrV2Entry. This object returns all of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is tr…
1.3.6.1.4.1.789.1.4.6.1.27ColumnqrV264KBytesThresholdread-onlycurrentA number of KBytes that when used by this entry produces a warning message. This object returns the all of the 64 bit unsigned integer. This will return 0 if q…
1.3.6.1.4.1.789.1.4.6.1.28ColumnqrV264KBytesSoftLimitread-onlycurrentThe limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns all of the 64 bit unsigned inte…
1.3.6.1.4.1.789.1.4.6.1.29ColumnqrV2VolumeNameread-onlycurrentIndicates the name of the volume to which this quota belongs to.
1.3.6.1.4.1.789.1.4.6.1.30ColumnqrV2Vserverread-onlycurrentIndicates the vserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.
1.3.6.1.4.1.789.1.4.7TableqrV3Tablenot-accessiblecurrentProvide a report of the current file and space consumption for each user, group, or qtree, as well as configured limits.
1.3.6.1.4.1.789.1.4.7.1RowqrV3Entrynot-accessiblecurrentProvide a report of the current file and space consumption for the referenced user, group, or qtree. Field qrV3Volume identifies the volume, and the combinatio…
1.3.6.1.4.1.789.1.4.7.1.1ColumnqrV3Volumeread-onlycurrentA number that identifies the volume for which this quota applies. The volume that this value represents can be determined by checking the value of qvStateName …
1.3.6.1.4.1.789.1.4.7.1.2ColumnqrV3IndexHighread-onlycurrentA number that identifies this entry within the volume. This is the most significant 32 bits of a 64 bit record identifier.
1.3.6.1.4.1.789.1.4.7.1.3ColumnqrV3IndexLowread-onlycurrentA number that identifies this entry within the volume. This is the least significant 32 bits of a 64 bit record identifier.
1.3.6.1.4.1.789.1.4.7.1.4ColumnqrV3Vserverread-onlycurrentIndicates the vserver to which the volume belongs. Name from the cluster interfaces.
1.3.6.1.4.1.789.1.4.7.1.5ColumnqrV3VolumeNameread-onlycurrentIndicates the name of the volume to which this quota belongs.
1.3.6.1.4.1.789.1.4.7.1.6ColumnqrV3Typeread-onlycurrentIdentifies the kind of quota for this qrV3Entry.
1.3.6.1.4.1.789.1.4.7.1.7ColumnqrV3IdTyperead-onlycurrentA value that indicates which ID field is valid.
1.3.6.1.4.1.789.1.4.7.1.8ColumnqrV3Idread-onlycurrentDepending on qrV3Type, this is either the UID (user's numerical ID), the GID (numerical ID of the group that a user belongs to), or the TID (numerical qtree id…
1.3.6.1.4.1.789.1.4.7.1.9ColumnqrV3Sidread-onlycurrentThe one or more IDs associated with this qrV3Entry. If the qrV3entry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the…
1.3.6.1.4.1.789.1.4.7.1.10ColumnqrV3PathNameread-onlycurrentA textual string that contains the path corresponding to this qrV3Entry.
1.3.6.1.4.1.789.1.4.7.1.11ColumnqrV3Treeread-onlycurrentA string that indicates which qtree this quota belongs to.
1.3.6.1.4.1.789.1.4.7.1.12ColumnqrV3KBytesUsedread-onlycurrentThe current number of KBytes used for this qrV3Entry.
1.3.6.1.4.1.789.1.4.7.1.13ColumnqrV3QuotaUnlimitedread-onlycurrentThis flag designates whether or not the size based quota limit for this qrV3Entry is unlimited. If false(1) then qrV3KBytesLimit OID's are valid, if true(2) th…
1.3.6.1.4.1.789.1.4.7.1.14ColumnqrV3KBytesLimitread-onlycurrentThe limit of KBytes that can be used for this qrV3Entry. This will return 0 if qrV3QuotaUnlimited is true.
1.3.6.1.4.1.789.1.4.7.1.15ColumnqrV3FilesUsedread-onlydeprecatedThe current number of files used for this qrV3Entry. This object is deprecated in favor of qrV364FilesUsed.
1.3.6.1.4.1.789.1.4.7.1.16ColumnqrV3FileQuotaUnlimitedread-onlycurrentThis flag designates whether or not the file based quota limit for this qrV3Entry is unlimited. If false(1) then qrV3FileLimit is valid, if true(2) qrV3FileLim…
1.3.6.1.4.1.789.1.4.7.1.17ColumnqrV3FileLimitread-onlydeprecatedThe limit of files that can be used for this qrV3Entry. This object is deprecated in favor of qrV364FileLimit.
1.3.6.1.4.1.789.1.4.7.1.18ColumnqrV3SoftQuotaUnlimitedread-onlycurrentThis flag designates whether or not the size based soft quota limit for this qrV3Entry is unlimited. If false(1) then qrV3KBytesSoftLimit OID's are valid, if t…
1.3.6.1.4.1.789.1.4.7.1.19ColumnqrV3KBytesSoftLimitread-onlycurrentThe limit of KBytes that can be used for this qrV3Entry before a warning message and SNMP trap is produced.
1.3.6.1.4.1.789.1.4.7.1.20ColumnqrV3SoftFileQuotaUnlimitedread-onlycurrentThis flag designates whether or not the file based soft quota limit for this qrV3Entry is unlimited. If false(1) then qrV3SoftFileLimit is valid, if true(2) qr…
1.3.6.1.4.1.789.1.4.7.1.21ColumnqrV3SoftFileLimitread-onlydeprecatedThe limit of files that can be used for this qrV3Entry before a warning message and SNMP trap is produced. This will return 0 if qrV3SoftFileQuotaUnlimited is …
1.3.6.1.4.1.789.1.4.7.1.22ColumnqrV3ThresholdUnlimitedread-onlycurrentThis flag designates whether or not the size based threshold limit for this qrV3Entry is unlimited. If false(1) then qrV3KBytesThreshold OID's are valid, if tr…
1.3.6.1.4.1.789.1.4.7.1.23ColumnqrV3KBytesThresholdread-onlycurrentA number of KBytes that when used by this entry produces a warning message. This will return 0 if qrV3ThresholdUnlimited is true.
1.3.6.1.4.1.789.1.4.7.1.24ColumnqrV364FilesUsedread-onlycurrentThe current number of files used for this qrV3Entry.
1.3.6.1.4.1.789.1.4.7.1.25ColumnqrV364FileLimitread-onlycurrentThe limit of files that can be used for this qrV3Entry.
1.3.6.1.4.1.789.1.4.7.1.26ColumnqrV364SoftFileLimitread-onlycurrentThe limit of files that can be used for this qrV3Entry before a warning message and SNMP trap is produced. This will return 0 if qrV3SoftFileQuotaUnlimited is …
1.3.6.1.4.1.789.1.5Nodefilesys
1.3.6.1.4.1.789.1.5.1ScalarfilesysMaxfilesAvailread-onlydeprecatedThe count of the maximum number of files allowable on the root volume. This object is deprecated - use dfEntry.dfMaxFilesAvail instead.
1.3.6.1.4.1.789.1.5.2ScalarfilesysMaxfilesUsedread-onlydeprecatedThe count of the number of files currently in use on the root volume. This object is deprecated - use dfEntry.dfMaxFilesUsed instead.
1.3.6.1.4.1.789.1.5.3ScalarfilesysMaxfilesPossibleread-onlydeprecatedThe largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the root volume. This object is deprecated - use dfE…
1.3.6.1.4.1.789.1.5.4TabledfTablenot-accessiblecurrentProvide a report of the available disk space on the file systems. The tables shows the available disk space for volumes as well as aggregates. For node volumes…
1.3.6.1.4.1.789.1.5.4.1RowdfEntrynot-accessiblecurrentProvide a report of the available disk space on the referenced file system. For entries returned from the cluster interfaces only, if the dfRowInfo is not set …
1.3.6.1.4.1.789.1.5.4.1.1ColumndfIndexread-onlycurrentA number that identifies this entry for the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.2ColumndfFileSysread-onlycurrentThe name for the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.3ColumndfKBytesTotalread-onlydeprecatedThe total capacity in KBytes for the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.4ColumndfKBytesUsedread-onlydeprecatedThe total disk space in KBytes that is in use on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.5ColumndfKBytesAvailread-onlydeprecatedThe total disk space in KBytes that is free for use on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.6ColumndfPerCentKBytesCapacityread-onlycurrentThe percentage of disk space currently in use on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.7ColumndfInodesUsedread-onlycurrentThe total number of inodes in use on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.8ColumndfInodesFreeread-onlycurrentThe total number of inodes that are available for use on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.9ColumndfPerCentInodeCapacityread-onlycurrentThe percentage of disk space currently in use based on inode counts, on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.10ColumndfMountedOnread-onlycurrentThe name of the file on which this file system is mounted.
1.3.6.1.4.1.789.1.5.4.1.11ColumndfMaxFilesAvailread-onlycurrentThe count of the maximum number of files allowable on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.12ColumndfMaxFilesUsedread-onlycurrentThe count of the number of files currently in use on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.13ColumndfMaxFilesPossibleread-onlycurrentThe largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.14ColumndfHighTotalKBytesread-onlydeprecatedThe total capacity in KBytes for the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is de…
1.3.6.1.4.1.789.1.5.4.1.15ColumndfLowTotalKBytesread-onlydeprecatedThe total capacity in KBytes for the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is d…
1.3.6.1.4.1.789.1.5.4.1.16ColumndfHighUsedKBytesread-onlydeprecatedThe total disk space in KBytes that is in use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. T…
1.3.6.1.4.1.789.1.5.4.1.17ColumndfLowUsedKBytesread-onlydeprecatedThe total disk space in KBytes that is in use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. …
1.3.6.1.4.1.789.1.5.4.1.18ColumndfHighAvailKBytesread-onlydeprecatedThe total disk space in KBytes that is free for use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned inte…
1.3.6.1.4.1.789.1.5.4.1.19ColumndfLowAvailKBytesread-onlydeprecatedThe total disk space in KBytes that is free for use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned int…
1.3.6.1.4.1.789.1.5.4.1.20ColumndfStatusread-onlycurrentThe status of the file system.
1.3.6.1.4.1.789.1.5.4.1.21ColumndfMirrorStatusread-onlycurrentOverall mirror status of the file system.
1.3.6.1.4.1.789.1.5.4.1.22ColumndfPlexCountread-onlycurrentNumber of plexes in this file system.
1.3.6.1.4.1.789.1.5.4.1.23ColumndfTyperead-onlycurrentIndicates the type of container.
1.3.6.1.4.1.789.1.5.4.1.24ColumndfHighSisSharedKBytesread-onlydeprecatedThe total amount of data in KBytes that is shared by more than one instance on the referenced file system. This object returns the most significant 32 bits of …
1.3.6.1.4.1.789.1.5.4.1.25ColumndfLowSisSharedKBytesread-onlydeprecatedThe total amount of data in KBytes that is shared by more than one instance on the referenced file system. This object returns the least significant 32 bits of…
1.3.6.1.4.1.789.1.5.4.1.26ColumndfHighSisSavedKBytesread-onlydeprecatedThe total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns the most signi…
1.3.6.1.4.1.789.1.5.4.1.27ColumndfLowSisSavedKBytesread-onlydeprecatedThe total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns the least sign…
1.3.6.1.4.1.789.1.5.4.1.28ColumndfPerCentSavedread-onlycurrentThe percentage of disk space saved by eliminating the duplicated blocks on the referenced file system.
1.3.6.1.4.1.789.1.5.4.1.29Columndf64TotalKBytesread-onlycurrentThe total capacity in KBytes for the referenced file system. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.5.4.1.30Columndf64UsedKBytesread-onlycurrentThe total disk space in KBytes that is in use on the referenced file system. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.5.4.1.31Columndf64AvailKBytesread-onlycurrentThe total disk space in KBytes that is free for use on the referenced file system. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.5.4.1.32Columndf64SisSharedKBytesread-onlycurrentThe total amount of data in KBytes that is shared by more than one instance on the referenced file system. This object returns all of the 64 bit unsigned integ…
1.3.6.1.4.1.789.1.5.4.1.33Columndf64SisSavedKBytesread-onlycurrentThe total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns all of the 64 …
1.3.6.1.4.1.789.1.5.4.1.34ColumndfVserverread-onlycurrentName of the vserver to which the volume belongs. For aggregate and aggregate snapshot it will be an empty string. This field is returned only from the cluster …
1.3.6.1.4.1.789.1.5.4.1.35ColumndfStateOnlineread-onlycurrentThe state of the cluster aggregates and volumes. If this is not true, all the values for the fields of this table are undefined. This field is returned only fr…
1.3.6.1.4.1.789.1.5.4.1.36ColumndfRowInforead-onlycurrentVolume or aggregate and its snapshot is 'available' or 'partiallyAvailable'. This field is returned only from the cluster interfaces. Possible values for this …
1.3.6.1.4.1.789.1.5.4.1.37Columndf64CompressSavedread-onlycurrentProvides the compression savings in a volume in KBytes. This is only returned for volumes.
1.3.6.1.4.1.789.1.5.4.1.38ColumndfCompressSavedPercentread-onlycurrentProvides the percentage of compression savings in a volume, which is ((compr_saved/(compr_saved + used)) * 100). This is only returned for volumes.
1.3.6.1.4.1.789.1.5.4.1.39Columndf64DedupeSavedread-onlycurrentProvides the deduplication savings in a volume in KBytes. This is only returned for volumes.
1.3.6.1.4.1.789.1.5.4.1.40ColumndfDedupeSavedPercentread-onlycurrentProvides the percentage of deduplication savings in a volume, which is ((dedup_saved/(dedup_saved + used)) * 100). This is only returned for volumes.
1.3.6.1.4.1.789.1.5.4.1.41Columndf64TotalSavedread-onlycurrentProvides the total savings due to deduplication & compression in a volume in KBytes. This is only returned for volumes.
1.3.6.1.4.1.789.1.5.4.1.42ColumndfTotalSavedPercentread-onlycurrentProvides the percentage of total savings due to deduplication & compression in a volume, which is ((total_saved/(total_saved + used)) * 100). This is only retu…
1.3.6.1.4.1.789.1.5.4.1.43Columndf64TotalReservedKBytesread-onlycurrentThe total disk space in KBytes that is reserved on the referenced file system.
1.3.6.1.4.1.789.1.5.5Nodesnapshot
1.3.6.1.4.1.789.1.5.5.1TableslTablenot-accessibledeprecatedProvide a report of the snapshots on the root volume. This table is deprecated - use slVTable instead.
1.3.6.1.4.1.789.1.5.5.1.1RowslEntrynot-accessibledeprecatedProvide a report on a given snapshot on the root volume. This object is deprecated - use slVEntry instead.
1.3.6.1.4.1.789.1.5.5.1.1.1ColumnslIndexread-onlydeprecatedA number that identifies this entry for the referenced file system.
1.3.6.1.4.1.789.1.5.5.1.1.2ColumnslMonthread-onlydeprecatedThe month in which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.1.1.3ColumnslDayread-onlydeprecatedThe day on which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.1.1.4ColumnslHourread-onlydeprecatedThe hour in which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.1.1.5ColumnslMinutesread-onlydeprecatedThe minute in which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.1.1.6ColumnslNameread-onlydeprecatedThe name of the referenced snapshot.
1.3.6.1.4.1.789.1.5.5.2TableslVTablenot-accessiblecurrentProvide a report of the snapshots on the file systems.
1.3.6.1.4.1.789.1.5.5.2.1RowslVEntrynot-accessiblecurrentProvide a report on a given snapshot on the file system. Indices select the volume of the snapshot and the snapshot entry itself.
1.3.6.1.4.1.789.1.5.5.2.1.1ColumnslVIndexread-onlycurrentA number that identifies this entry for the referenced file system.
1.3.6.1.4.1.789.1.5.5.2.1.2ColumnslVMonthread-onlycurrentThe month in which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.2.1.3ColumnslVDayread-onlycurrentThe day on which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.2.1.4ColumnslVHourread-onlycurrentThe hour in which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.2.1.5ColumnslVMinutesread-onlycurrentThe minute in which the snapshot was created.
1.3.6.1.4.1.789.1.5.5.2.1.6ColumnslVNameread-onlycurrentThe name of the referenced snapshot.
1.3.6.1.4.1.789.1.5.5.2.1.7ColumnslVVolumeread-onlycurrentA number that identifies the volume / aggregate that contains this snapshot.
1.3.6.1.4.1.789.1.5.5.2.1.8ColumnslVNumberread-onlycurrentNumber of snapshots for this volume / aggregate.
1.3.6.1.4.1.789.1.5.5.2.1.9ColumnslVVolumeNameread-onlycurrentThe name of the volume / aggregate. This does not have a /vol/ prefix.
1.3.6.1.4.1.789.1.5.5.2.1.10ColumnslVTyperead-onlycurrentIndicates the type of container for this snapshot.
1.3.6.1.4.1.789.1.5.5.3TableslQTablenot-accessiblecurrentProvide a report of the snapshots and their contents on the file systems.
1.3.6.1.4.1.789.1.5.5.3.1RowslQEntrynot-accessiblecurrentProvide a report on a given snapshot for a given qtree on the file system. Indices select the volume and qtree of the snapshot and the snapshot entry itself.
1.3.6.1.4.1.789.1.5.5.3.1.1ColumnslQIndexread-onlycurrentA number that identifies this entry for the referenced file system.
1.3.6.1.4.1.789.1.5.5.3.1.2ColumnslQVolumeread-onlycurrentA number that identifies the volume that contains this snapshot.
1.3.6.1.4.1.789.1.5.5.3.1.3ColumnslQQtreeread-onlycurrentA number that identifies the qtree that contains this snapshot.
1.3.6.1.4.1.789.1.5.5.3.1.4ColumnslQSnapshotNameread-onlycurrentThe name of the referenced snapshot.
1.3.6.1.4.1.789.1.5.5.3.1.5ColumnslQSnapshotTimeread-onlycurrentTime of the snapshot on the system. The time in seconds since January 1, 1970.
1.3.6.1.4.1.789.1.5.5.3.1.6ColumnslQQtreeNameread-onlycurrentA string that indicates which qtree is in this snapshot
1.3.6.1.4.1.789.1.5.5.3.1.7ColumnslQQtreeContentread-onlycurrentThe content of the qtree tree
1.3.6.1.4.1.789.1.5.5.3.1.8ColumnslQSourceread-onlycurrentThe source of this qtree for a replicated qtree. '-' for an original qtree.
1.3.6.1.4.1.789.1.5.5.3.1.9ColumnslQSourceTimeread-onlycurrentTime of the source snapshot for a replicated qtree. Time of the current snapshot for an original qtree. The time in seconds since January 1, 1970. 0 if the qtr…
1.3.6.1.4.1.789.1.5.5.3.1.10ColumnslQVolumeNameread-onlycurrentThe name of the volume. This does not have a /vol/ prefix.
1.3.6.1.4.1.789.1.5.6ScalardfNumberread-onlycurrentNumber of entries in the dfTable table.
1.3.6.1.4.1.789.1.5.7NodefsStatus
1.3.6.1.4.1.789.1.5.7.1ScalarfsOverallStatusread-onlycurrentAn indication of overall file system health. 'ok' indicates that all file systems have adequate space. 'nearlyFull' means that one or more is nearly full (more…
1.3.6.1.4.1.789.1.5.7.2ScalarfsStatusMessageread-onlycurrentA string indicating any file systems which are full or nearly full.
1.3.6.1.4.1.789.1.5.7.3ScalarfsMaxUsedBytesPerCentread-onlycurrentThe percentage of space currently in use or reserved by the fullest file system.
1.3.6.1.4.1.789.1.5.7.4ScalarfsMaxUsedInodesPerCentread-onlycurrentThe percentage of inodes currently in use by the fullest file system.
1.3.6.1.4.1.789.1.5.8TablevolTablenot-accessiblecurrentList the volumes defined on the system, including offline volumes.
1.3.6.1.4.1.789.1.5.8.1RowvolEntrynot-accessiblecurrentProvide details about a particular volume. For entries returned only from the cluster interfaces, if the volRowInfo is not set to 'available', the values repor…
1.3.6.1.4.1.789.1.5.8.1.1ColumnvolIndexread-onlycurrentA number that identifies this volume. The volIndex is not related to any other table defined in this MIB, and may change as volumes are created and destroyed.
1.3.6.1.4.1.789.1.5.8.1.2ColumnvolNameread-onlycurrentName of the volume. This includes no /vol/ prefix.
1.3.6.1.4.1.789.1.5.8.1.3ColumnvolFSIDread-onlycurrentUnique identifier for this volume.
1.3.6.1.4.1.789.1.5.8.1.4ColumnvolOwningHostread-onlycurrentIndication of which host owns this volume. This field is not supported in a cluster.
1.3.6.1.4.1.789.1.5.8.1.5ColumnvolStateread-onlycurrentState of the volume, such as 'online' or 'offline'.
1.3.6.1.4.1.789.1.5.8.1.6ColumnvolStatusread-onlycurrentStatus of the volume, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.
1.3.6.1.4.1.789.1.5.8.1.7ColumnvolOptionsread-onlycurrentOptions associated with the volume, such as 'root' and 'nosnapdir=off'. May include several values separated by comma.
1.3.6.1.4.1.789.1.5.8.1.8ColumnvolUUIDread-onlycurrentA unique id associated with the volume.
1.3.6.1.4.1.789.1.5.8.1.9ColumnvolAggrNameread-onlycurrentName of the aggregate this flexible volume is a part of.
1.3.6.1.4.1.789.1.5.8.1.10ColumnvolTyperead-onlycurrentType of this volume.
1.3.6.1.4.1.789.1.5.8.1.11ColumnvolCloneread-onlycurrentTrue indicates flexible volume is a clone.
1.3.6.1.4.1.789.1.5.8.1.12ColumnvolCloneOfread-onlycurrentName of flexible volume this flexible volume is a clone of.
1.3.6.1.4.1.789.1.5.8.1.13ColumnvolCloneSnapread-onlycurrentName of original cloned snapshot.
1.3.6.1.4.1.789.1.5.8.1.14ColumnvolVserverread-onlycurrentVserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.
1.3.6.1.4.1.789.1.5.8.1.15ColumnvolMSIDread-onlycurrentThe volume's Mirror Set ID. MSIDs are formatted as 10-character strings composed of 8 hex characters prefixed with '0x'. Only applicable to cluster-mode volume.
1.3.6.1.4.1.789.1.5.8.1.16ColumnvolDSIDread-onlycurrentThe volume's Data Set ID. DSIDs are formatted as 10-character strings composed of 8 hex characters prefixed with '0x'. Only applicable to cluster-mode volume.
1.3.6.1.4.1.789.1.5.8.1.17ColumnvolSpaceGuaranteeEnabledread-onlycurrentWhether or not the space guarantee style associated with the volume is currently in effect. This field does not appear if the flexible volume is restricted or …
1.3.6.1.4.1.789.1.5.8.1.18ColumnvolSpaceGuaranteeread-onlycurrentThe space guarantee style associated with the volume, such as 'volume', etc. This field does not appear if the flexible volume is restricted or offline.
1.3.6.1.4.1.789.1.5.8.1.19ColumnvolLanguageread-onlycurrentThe language currently set for the volume. For example, 'English '.
1.3.6.1.4.1.789.1.5.8.1.20ColumnvolLanguageCoderead-onlycurrentThe language code currently set for the volume. For example, 'en'.
1.3.6.1.4.1.789.1.5.8.1.21ColumnvolCloneChildrenListread-onlycurrentA comma separated list of all volume's child clones.
1.3.6.1.4.1.789.1.5.8.1.22ColumnvolJunctionPathActiveread-onlycurrentIndicates if a Junction Path is active on this volume. This field is returned only from the cluster interfaces.
1.3.6.1.4.1.789.1.5.8.1.23ColumnvolJunctionPathread-onlycurrentThe mount path for the volume, relative to the root volume. This field is returned only from the cluster interfaces.
1.3.6.1.4.1.789.1.5.8.1.24ColumnvolJunctionPathSourceread-onlycurrentSource directory of the Junction Path for this volume. This field is returned only from the cluster interfaces. Two possible values are 'LSM volume' for Load S…
1.3.6.1.4.1.789.1.5.8.1.25ColumnvolRowInforead-onlycurrentVolume is 'available' or 'partiallyAvailable'. This field is returned only from the cluster interfaces. Two possible values are: 'available' Indicates a normal…
1.3.6.1.4.1.789.1.5.8.1.26ColumnvolNvfailread-onlycurrentIndicates whether nvfail option is enabled on this volume.
1.3.6.1.4.1.789.1.5.8.1.27ColumnvolInNvfailedStateread-onlycurrentIndicates whether the volume is in nvfailed state. This is only applicable to cluster-mode volumes.
1.3.6.1.4.1.789.1.5.8.1.28ColumnvolInstanceUUIDread-onlycurrentA unique id associated with the volume that moves with the volume when the volume is migrated.
1.3.6.1.4.1.789.1.5.8.1.29ColumnvolProvenanceUUIDread-onlycurrentA unique id associated with the volume that identifies the source of the volume content.
1.3.6.1.4.1.789.1.5.8.1.30ColumnvolDrForceNvfailread-onlycurrentIndicates whether dr-force-nvfail option is enabled on this volume. If true, volume would be put in a special state called 'in-nvfailed-state' by switchover op…
1.3.6.1.4.1.789.1.5.9ScalarvolNumberread-onlycurrentNumber of volumes in the volTable.
1.3.6.1.4.1.789.1.5.10TableqtreeTablenot-accessiblecurrentProvide a list of the qtrees on the system.
1.3.6.1.4.1.789.1.5.10.1RowqtreeEntrynot-accessiblecurrentProvide details about a particular qtree.
1.3.6.1.4.1.789.1.5.10.1.1ColumnqtreeIndexread-onlycurrentIndex into the qtree table.
1.3.6.1.4.1.789.1.5.10.1.2ColumnqtreeVolumeread-onlycurrentA number that identifies the volume that contains this qtree.
1.3.6.1.4.1.789.1.5.10.1.3ColumnqtreeVolumeNameread-onlycurrentThe name of the volume that contains this qtree. This includes no /vol/prefix.
1.3.6.1.4.1.789.1.5.10.1.4ColumnqtreeIdread-onlycurrentThe Id number of the qtree.
1.3.6.1.4.1.789.1.5.10.1.5ColumnqtreeNameread-onlycurrentThe name of the qtree.
1.3.6.1.4.1.789.1.5.10.1.6ColumnqtreeStyleread-onlycurrentThe security style of the qtree.
1.3.6.1.4.1.789.1.5.10.1.7ColumnqtreeStatusread-onlycurrentThe status of the qtree.
1.3.6.1.4.1.789.1.5.10.1.8ColumnqtreeOplockread-onlycurrentAn indication of whether the oplocks is enabled or not for this qtree.
1.3.6.1.4.1.789.1.5.10.1.9ColumnqtreeVserverread-onlycurrentIndicates the vserver to which the volume belongs. Name from the cluster interfaces. Only applicable to cluster-mode volume.
1.3.6.1.4.1.789.1.5.10.1.10ColumnqtreeExportPolicyread-onlycurrentIndicates the export policy assigned to the qtree.
1.3.6.1.4.1.789.1.5.10.1.11ColumnqtreeIsExportPolicyInheritedread-onlycurrentIndicates the export policy assigned to the qtree is inherited from the parent volume.
1.3.6.1.4.1.789.1.5.10.1.12ColumnqtreeModeread-onlycurrentThe file permission bits of the qtree.
1.3.6.1.4.1.789.1.5.10.1.13ColumnqtreeQosPolicyGroupread-onlycurrentIndicates the qos policy group assigned to the qtree.
1.3.6.1.4.1.789.1.5.11TableaggrTablenot-accessiblecurrentList the aggregates defined on the system, including offline aggregates.
1.3.6.1.4.1.789.1.5.11.1RowaggrEntrynot-accessiblecurrentProvide details about a particular aggregate. For entries returned only from the cluster interfaces, if the aggrRowInfo is not set to 'available', the values r…
1.3.6.1.4.1.789.1.5.11.1.1ColumnaggrIndexread-onlycurrentA number that identifies this aggregate. The aggrIndex is not related to any other table defined in this MIB, and may change as aggregates are created and dest…
1.3.6.1.4.1.789.1.5.11.1.2ColumnaggrNameread-onlycurrentName of the aggregate. This includes no /vol/ prefix.
1.3.6.1.4.1.789.1.5.11.1.3ColumnaggrFSIDread-onlycurrentUnique identifier for this aggregate.
1.3.6.1.4.1.789.1.5.11.1.4ColumnaggrOwningHostread-onlycurrentIndication of which host owns this aggregate. This field is not supported in a cluster.
1.3.6.1.4.1.789.1.5.11.1.5ColumnaggrStateread-onlycurrentState of the aggregate, such as 'online' or 'offline'.
1.3.6.1.4.1.789.1.5.11.1.6ColumnaggrStatusread-onlycurrentStatus of the aggregate, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.
1.3.6.1.4.1.789.1.5.11.1.7ColumnaggrOptionsread-onlycurrentOptions associated with the aggregate.
1.3.6.1.4.1.789.1.5.11.1.8ColumnaggrUUIDread-onlycurrentA unique id associated with the aggregate.
1.3.6.1.4.1.789.1.5.11.1.9ColumnaggrFlexvollistread-onlycurrentList of all the flexible volumes within this aggregate. This field is not supported in a cluster.
1.3.6.1.4.1.789.1.5.11.1.10ColumnaggrTyperead-onlycurrentType of this container, containers containing flexible volumes are aggregate.
1.3.6.1.4.1.789.1.5.11.1.11ColumnaggrRaidTyperead-onlycurrentType of raid protection of the aggregate, such as 'raid0', 'mirrored raid0', 'raid4', 'mirrored raid4', 'raid_dp', 'mirrored raid_dp'.
1.3.6.1.4.1.789.1.5.11.1.12ColumnaggrHATyperead-onlycurrentAggregate failover type, such as 'cfo' for cluster failover, 'sfo' for storage failover. This is set to 'none' if aggregate failover type is not known.
1.3.6.1.4.1.789.1.5.11.1.13ColumnaggrOwnersread-onlycurrentCurrent owner(s) or the node(s) to which the aggregate belongs to. In case of striped aggregates, this will be a comma separated list of nodes to which the agg…
1.3.6.1.4.1.789.1.5.11.1.14ColumnaggrRowInforead-onlycurrentAggregate is 'available' or 'partiallyAvailable'. This OID is available only from the cluster management interfaces. Two possible values are: 'available' : Ind…
1.3.6.1.4.1.789.1.5.11.1.15ColumnaggrVolumeFootprintsread-onlydeprecatedFootprint of data and metadata inside volumes belonging to the Aggregate. This field is deprecated in Data ONTAP 8.3 and later - use the volume-footprints fiel…
1.3.6.1.4.1.789.1.5.11.1.16ColumnaggrVolumeFootprintsPercentread-onlydeprecatedFootprint of data and metadata inside volumes belonging to the aggregate as a percentage of aggregate size. This field is deprecated in Data ONTAP 8.3 and late…
1.3.6.1.4.1.789.1.5.11.1.17ColumnaggrFilesystemMetadataread-onlydeprecatedMetadata of the Aggregate. This field is deprecated in Data ONTAP 8.3 and later - use the aggregate-metadata field of the aggr-space-get-iter ZAPI instead.
1.3.6.1.4.1.789.1.5.11.1.18ColumnaggrFilesystemMetadataPercentread-onlydeprecatedMetadata of the Aggregate as a percentage of Aggregate size. This field is deprecated in Data ONTAP 8.3 and later - use the aggregate-metadata-percent field of…
1.3.6.1.4.1.789.1.5.12ScalaraggrNumberread-onlycurrentNumber of aggregates in the aggrTable.
1.3.6.1.4.1.789.1.5.13TablevolMoveStatusTablenot-accessiblecurrentStatus of Vol Move operation
1.3.6.1.4.1.789.1.5.13.1RowvolMoveStatusEntrynot-accessiblecurrentProvide movement details of a particular volume
1.3.6.1.4.1.789.1.5.13.1.1ColumnvolMoveIndexread-onlycurrentA number that identifies this volume. The volIndex is not related to any other table defined in this MIB, and may change as volumes are created and destroyed.
1.3.6.1.4.1.789.1.5.13.1.2ColumnvolMoveSrcNameread-onlycurrentName of the vol move source volume. This will not have the /vol/ prefix.
1.3.6.1.4.1.789.1.5.13.1.3ColumnvolMoveDstaggrNameread-onlycurrentName of the vol move destination aggregate
1.3.6.1.4.1.789.1.5.13.1.4ColumnvolMoveCOattemptsread-onlycurrentMaximum Cutover attempts for specified vol move operation
1.3.6.1.4.1.789.1.5.13.1.5ColumnvolMoveCOtimeread-onlycurrentMaximum Cutover time for specified vol move operation
1.3.6.1.4.1.789.1.5.13.1.6ColumnvolMoveStateread-onlycurrentState of the vol move operation
1.3.6.1.4.1.789.1.6Noderaid
1.3.6.1.4.1.789.1.6.1TableraidTablenot-accessibledeprecatedDisplay RAID configuration information for the root volume. This table is deprecated - use raidVTable instead.
1.3.6.1.4.1.789.1.6.1.1RowraidEntrynot-accessibledeprecatedDisplay RAID configuration information for the referenced disk drive. This only works for disks contained within the root volume, and will include spare drives…
1.3.6.1.4.1.789.1.6.1.1.1ColumnraidIndexread-onlydeprecatedA number that identifies this entry for the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.2ColumnraidDiskNameread-onlydeprecatedThe name identifying the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.3ColumnraidStatusread-onlydeprecatedThe status of the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.4ColumnraidDiskIdread-onlydeprecatedThe disk identifier for the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.5ColumnraidScsiAdapterread-onlydeprecatedThe identifier of the SCSI adapter for the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.6ColumnraidScsiIdread-onlydeprecatedThe identifier for the referenced disk drive on the referenced SCSI adapter.
1.3.6.1.4.1.789.1.6.1.1.7ColumnraidUsedMbread-onlydeprecatedThe number of MBytes currently in use on the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.8ColumnraidUsedBlocksread-onlydeprecatedThe number of Blocks currently in use on the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.9ColumnraidTotalMbread-onlydeprecatedThe number of MBytes physically available on the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.10ColumnraidTotalBlocksread-onlydeprecatedThe number of Blocks physically available on the referenced disk drive.
1.3.6.1.4.1.789.1.6.1.1.11ColumnraidCompletionPerCentread-onlydeprecatedIn the case when reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such reconstruction, verification or scrubbing that ha…
1.3.6.1.4.1.789.1.6.2TableraidVTablenot-accessiblecurrentDisplay RAID configuration information.
1.3.6.1.4.1.789.1.6.2.1RowraidVEntrynot-accessiblecurrentDisplay RAID configuration information for the referenced aggregate, raid group, and disk drive.
1.3.6.1.4.1.789.1.6.2.1.1ColumnraidVIndexread-onlycurrentA number that identifies this disk drive within the given aggregate and RAID group.
1.3.6.1.4.1.789.1.6.2.1.2ColumnraidVDiskNameread-onlycurrentThe name identifying the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.3ColumnraidVStatusread-onlycurrentThe status of the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.4ColumnraidVDiskIdread-onlydeprecatedThe disk identifier for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.2.1.5ColumnraidVScsiAdapterread-onlydeprecatedThe identifier of the SCSI adapter for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.2.1.6ColumnraidVScsiIdread-onlydeprecatedThe identifier for the referenced disk drive on the referenced SCSI adapter. This OID is not available from the Cluster management interfaces. This object is d…
1.3.6.1.4.1.789.1.6.2.1.7ColumnraidVUsedMbread-onlycurrentThe number of MBytes currently in use on the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.8ColumnraidVUsedBlocksread-onlydeprecatedThe number of Blocks currently in use on the referenced disk drive. This object is deprecated. Use raidV64UsedBlocks object instead.
1.3.6.1.4.1.789.1.6.2.1.9ColumnraidVTotalMbread-onlycurrentThe number of MBytes physically available on the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.10ColumnraidVTotalBlocksread-onlydeprecatedThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use raidV64TotalBlocks object instead.
1.3.6.1.4.1.789.1.6.2.1.11ColumnraidVCompletionPerCentread-onlycurrentIn the case when rapid raid recovery, disk copy, reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstruct…
1.3.6.1.4.1.789.1.6.2.1.12ColumnraidVVolread-onlycurrentA number that identifies the aggregate that this entry belongs to. The first aggregate is '1'.
1.3.6.1.4.1.789.1.6.2.1.13ColumnraidVGroupread-onlycurrentA number that identifies the RAID group within the given aggregate that this entry belongs to. The first RAID group is '1', and number across all plexes.
1.3.6.1.4.1.789.1.6.2.1.14ColumnraidVDiskNumberread-onlycurrentThe number of disks within this RAID group.
1.3.6.1.4.1.789.1.6.2.1.15ColumnraidVGroupNumberread-onlycurrentThe number of RAID groups within this aggregate.
1.3.6.1.4.1.789.1.6.2.1.16ColumnraidVDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which …
1.3.6.1.4.1.789.1.6.2.1.17ColumnraidVSecondaryDiskNameread-onlydeprecatedThe name identifying the secondary path to the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecat…
1.3.6.1.4.1.789.1.6.2.1.18ColumnraidVSecondaryDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate whic…
1.3.6.1.4.1.789.1.6.2.1.19ColumnraidVShelfread-onlycurrentNumber identifying the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.2.1.20ColumnraidVBayread-onlycurrentNumber identifying the disk bay within the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.2.1.21ColumnraidVPlexread-onlycurrentA number that identifies the plex within the given aggregate that this entry belongs to. The first plex is '1'.
1.3.6.1.4.1.789.1.6.2.1.22ColumnraidVPlexGroupread-onlycurrentA number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.
1.3.6.1.4.1.789.1.6.2.1.23ColumnraidVPlexNumberread-onlycurrentThe number of plexes within this aggregate. This number is always 1 or 2.
1.3.6.1.4.1.789.1.6.2.1.24ColumnraidVPlexNameread-onlycurrentA name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.
1.3.6.1.4.1.789.1.6.2.1.25ColumnraidVSectorSizeread-onlycurrentA number that specifies bytes per sector for this entry. Values are '512' or '520'.
1.3.6.1.4.1.789.1.6.2.1.26ColumnraidVDiskSerialNumberread-onlycurrentSerial number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.27ColumnraidVDiskVendorread-onlycurrentThe vendor of the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.28ColumnraidVDiskModelread-onlycurrentModel string of the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.29ColumnraidVDiskFirmwareRevisionread-onlycurrentFirmware revision number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.30ColumnraidVDiskRPMread-onlycurrentRPM of the referenced disk drive.
1.3.6.1.4.1.789.1.6.2.1.31ColumnraidVDiskTyperead-onlycurrentInterface type of the referenced disk drive. e.g SCSI, or ATA.
1.3.6.1.4.1.789.1.6.2.1.32ColumnraidVDiskPoolread-onlycurrentA name that identifies the disk pool that this entry belongs to.
1.3.6.1.4.1.789.1.6.2.1.33ColumnraidVDiskCopyDestDiskNameread-onlycurrentWhen raidVStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.
1.3.6.1.4.1.789.1.6.2.1.34ColumnraidVDiskUIDread-onlycurrentUnique identifier for the disk. The maximum length is 90 characters.
1.3.6.1.4.1.789.1.6.2.1.35ColumnraidV64UsedBlocksread-onlycurrentThe number of Blocks currently in use on the referenced disk drive. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.6.2.1.36ColumnraidV64TotalBlocksread-onlycurrentThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.6.2.1.37ColumnraidVCarrierIDread-onlycurrentUnique identifier of the disk carrier.
1.3.6.1.4.1.789.1.6.3TablespareTablenot-accessiblecurrentDisplay spare disk configuration information.
1.3.6.1.4.1.789.1.6.3.1RowspareEntrynot-accessiblecurrentDisplay configuration information for the referenced spare disk drive.
1.3.6.1.4.1.789.1.6.3.1.1ColumnspareIndexread-onlycurrentA number that identifies this entry for the referenced disk drive in the list of spare disk drives.
1.3.6.1.4.1.789.1.6.3.1.2ColumnspareDiskNameread-onlycurrentThe name identifying the referenced spare disk drive.
1.3.6.1.4.1.789.1.6.3.1.3ColumnspareStatusread-onlycurrentThe status of the referenced spare disk drive.
1.3.6.1.4.1.789.1.6.3.1.4ColumnspareDiskIdread-onlydeprecatedThe disk identifier for the referenced spare disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.3.1.5ColumnspareScsiAdapterread-onlydeprecatedThe identifier of the SCSI adapter for the referenced spare disk drive. This OID is not available from the Cluster management interfaces. This object is deprec…
1.3.6.1.4.1.789.1.6.3.1.6ColumnspareScsiIdread-onlydeprecatedThe identifier for the referenced spare disk drive on the referenced SCSI adapter. This OID is not available from the Cluster management interfaces. This objec…
1.3.6.1.4.1.789.1.6.3.1.7ColumnspareTotalMbread-onlycurrentThe number of MBytes physically available on the referenced spare disk drive.
1.3.6.1.4.1.789.1.6.3.1.8ColumnspareTotalBlocksread-onlydeprecatedThe number of Blocks physically available on the referenced spare disk drive. This object is deprecated. Use spare64TotalBlocks object instead.
1.3.6.1.4.1.789.1.6.3.1.9ColumnspareDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which …
1.3.6.1.4.1.789.1.6.3.1.10ColumnspareSecondaryDiskNameread-onlydeprecatedThe name identifying the secondary path to the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecat…
1.3.6.1.4.1.789.1.6.3.1.11ColumnspareSecondaryDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate whic…
1.3.6.1.4.1.789.1.6.3.1.12ColumnspareShelfread-onlycurrentNumber identifying the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.3.1.13ColumnspareBayread-onlycurrentNumber identifying the disk bay within the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.3.1.14ColumnsparePoolread-onlycurrentA name that identifies the disk pool that this entry belongs to.
1.3.6.1.4.1.789.1.6.3.1.15ColumnspareSectorSizeread-onlycurrentA number that specifies bytes per sector for this entry. Values are '512' or '520'.
1.3.6.1.4.1.789.1.6.3.1.16ColumnspareDiskSerialNumberread-onlycurrentSerial number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.3.1.17ColumnspareDiskVendorread-onlycurrentThe vendor of the referenced disk drive.
1.3.6.1.4.1.789.1.6.3.1.18ColumnspareDiskModelread-onlycurrentModel string of the referenced disk drive.
1.3.6.1.4.1.789.1.6.3.1.19ColumnspareDiskFirmwareRevisionread-onlycurrentFirmware revision number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.3.1.20ColumnspareDiskRPMread-onlycurrentRPM of the referenced disk drive.
1.3.6.1.4.1.789.1.6.3.1.21ColumnspareDiskTyperead-onlycurrentInterface type of the referenced disk drive. e.g SCSI, or ATA.
1.3.6.1.4.1.789.1.6.3.1.22ColumnspareDiskUIDread-onlycurrentExternal unique identifier for the disk. The Maximum length is 90 characters.
1.3.6.1.4.1.789.1.6.3.1.23Columnspare64TotalBlocksread-onlycurrentThe number of Blocks physically available on the referenced spare disk drive. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.6.3.1.24ColumnspareCarrierIDread-onlycurrentUnique identifier of the disk carrier.
1.3.6.1.4.1.789.1.6.3.1.25ColumnspareOwnerNoderead-onlycurrentOwner node of the spare disk.
1.3.6.1.4.1.789.1.6.3.1.26ColumnspareDrawerread-onlycurrentUsed for shelves with drawers. Number identifying the physical drawer where the disk is located.
1.3.6.1.4.1.789.1.6.3.1.27ColumnspareDrawerSlotread-onlycurrentUsed for shelves with drawers. Identifies which slot in the drawer this disk is located.
1.3.6.1.4.1.789.1.6.4NodediskSummary
1.3.6.1.4.1.789.1.6.4.1ScalardiskTotalCountread-onlycurrentThe total number of disks on the system.
1.3.6.1.4.1.789.1.6.4.2ScalardiskActiveCountread-onlycurrentThe number of disks which are currently active, including parity disks.
1.3.6.1.4.1.789.1.6.4.3ScalardiskReconstructingCountread-onlycurrentThe number of disks which are currently being reconstructed.
1.3.6.1.4.1.789.1.6.4.4ScalardiskReconstructingParityCountread-onlycurrentThe number of parity disks which are currently being reconstructed.
1.3.6.1.4.1.789.1.6.4.5ScalardiskVerifyingParityCountread-onlycurrentThe number of disks which are currently being verified.
1.3.6.1.4.1.789.1.6.4.6ScalardiskScrubbingCountread-onlycurrentThe number of disks which are currently being scrubbed.
1.3.6.1.4.1.789.1.6.4.7ScalardiskFailedCountread-onlycurrentThe number of disks which are currently broken.
1.3.6.1.4.1.789.1.6.4.8ScalardiskSpareCountread-onlycurrentThe number of available spare disks.
1.3.6.1.4.1.789.1.6.4.9ScalardiskAddingSpareCountread-onlycurrentThe number of spare disks which are currently being added into a RAID group.
1.3.6.1.4.1.789.1.6.4.10ScalardiskFailedMessageread-onlycurrentIf diskFailedCount is non-zero, this is a string describing the failed disk or disks. Each failed disk is described with a sentence like Disk on adapter 8a, sh…
1.3.6.1.4.1.789.1.6.4.11ScalardiskPrefailedCountread-onlycurrentThe number of disks which are prefailed and marked for rapid raid recovery.
1.3.6.1.4.1.789.1.6.5ScalarraidVNumberread-onlycurrentNumber of entries in the raidVTable table. This is the total number of aggregates in the system.
1.3.6.1.4.1.789.1.6.6ScalarspareNumberread-onlycurrentNumber of entries in the spareTable table.
1.3.6.1.4.1.789.1.6.7ScalarotherDiskNumberread-onlycurrentNumber of entries in the otherDiskTable table.
1.3.6.1.4.1.789.1.6.8ScalarraidPNumberread-onlycurrentNumber of entries in the raidPTable table. This is the total number of aggregates in the system.
1.3.6.1.4.1.789.1.6.9TableotherDiskTablenot-accessiblecurrentDisplay out-of-service disk configuration information.
1.3.6.1.4.1.789.1.6.9.1RowotherDiskEntrynot-accessiblecurrentDisplay configuration information for the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.1ColumnotherDiskIndexread-onlycurrentA number that identifies this entry for the referenced disk drive in the list of out-of-service disk drives. Out-of-service disks include all disks that are no…
1.3.6.1.4.1.789.1.6.9.1.2ColumnotherDiskDiskNameread-onlycurrentThe name identifying the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.3ColumnotherDiskStatusread-onlycurrentThe status of the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.4ColumnotherDiskDiskIdread-onlydeprecatedThe disk identifier for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.9.1.5ColumnotherDiskScsiAdapterread-onlydeprecatedThe identifier of the SCSI adapter for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.9.1.6ColumnotherDiskScsiIdread-onlydeprecatedThe identifier for the referenced disk drive on the referenced SCSI adapter. This OID is not available from the Cluster management interfaces. This object is d…
1.3.6.1.4.1.789.1.6.9.1.7ColumnotherDiskTotalMbread-onlycurrentThe number of MBytes physically available on the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.8ColumnotherDiskTotalBlocksread-onlydeprecatedThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use otherDisk64TotalBlocks object instead.
1.3.6.1.4.1.789.1.6.9.1.9ColumnotherDiskDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which …
1.3.6.1.4.1.789.1.6.9.1.10ColumnotherDiskSecondaryDiskNameread-onlydeprecatedThe name identifying the secondary path to the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecat…
1.3.6.1.4.1.789.1.6.9.1.11ColumnotherDiskSecondaryDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate whic…
1.3.6.1.4.1.789.1.6.9.1.12ColumnotherDiskShelfread-onlycurrentNumber identifying the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.9.1.13ColumnotherDiskBayread-onlycurrentNumber identifying the disk bay within the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.9.1.14ColumnotherDiskPoolread-onlycurrentA name that identifies the disk pool that this entry belongs to.
1.3.6.1.4.1.789.1.6.9.1.15ColumnotherDiskSectorSizeread-onlycurrentA number that specifies bytes per sector for this entry. Values are '512' or '520'.
1.3.6.1.4.1.789.1.6.9.1.16ColumnotherDiskSerialNumberread-onlycurrentSerial number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.17ColumnotherDiskVendorread-onlycurrentThe vendor of the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.18ColumnotherDiskModelread-onlycurrentModel string of the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.19ColumnotherDiskFirmwareRevisionread-onlycurrentFirmware revision number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.20ColumnotherDiskRPMread-onlycurrentRPM of the referenced disk drive.
1.3.6.1.4.1.789.1.6.9.1.21ColumnotherDiskTyperead-onlycurrentInterface type of the referenced disk drive. e.g SCSI, or ATA.
1.3.6.1.4.1.789.1.6.9.1.22ColumnotherDisk64TotalBlocksread-onlycurrentThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.6.9.1.23ColumnotherDiskCarrierIDread-onlycurrentUnique identifier of the disk carrier.
1.3.6.1.4.1.789.1.6.9.1.24ColumnotherDiskDrawerread-onlycurrentUsed for shelves with drawers. Number identifying the physical drawer where the disk is located.
1.3.6.1.4.1.789.1.6.9.1.25ColumnotherDiskDrawerSlotread-onlycurrentUsed for shelves with drawers. Identifies which slot in the drawer this disk is located.
1.3.6.1.4.1.789.1.6.10TableraidPTablenot-accessiblecurrentDisplay RAID configuration information.
1.3.6.1.4.1.789.1.6.10.1RowraidPEntrynot-accessiblecurrentDisplay RAID configuration information for the referenced aggregate, plex, raid group, and disk drive.
1.3.6.1.4.1.789.1.6.10.1.1ColumnraidPIndexread-onlycurrentA number that identifies this disk drive within the given aggregate and RAID group.
1.3.6.1.4.1.789.1.6.10.1.2ColumnraidPStatusread-onlycurrentThe status of the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.3ColumnraidPVolread-onlycurrentA number that identifies the aggregate that this entry belongs to. The first aggregate is '1'.
1.3.6.1.4.1.789.1.6.10.1.4ColumnraidPPlexread-onlycurrentA number that identifies the plex that this entry belongs to. The first plex is '1'.
1.3.6.1.4.1.789.1.6.10.1.5ColumnraidPGroupread-onlycurrentA number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.
1.3.6.1.4.1.789.1.6.10.1.6ColumnraidPPlexNumberread-onlycurrentThe number of plexes within this aggregate. This number is always 1 or 2.
1.3.6.1.4.1.789.1.6.10.1.7ColumnraidPGroupNumberread-onlycurrentThe number of RAID groups within this plex.
1.3.6.1.4.1.789.1.6.10.1.8ColumnraidPDiskNumberread-onlycurrentThe number of disks within this RAID group.
1.3.6.1.4.1.789.1.6.10.1.9ColumnraidPPlexNameread-onlycurrentA name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.
1.3.6.1.4.1.789.1.6.10.1.10ColumnraidPDiskNameread-onlycurrentThe name identifying the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.11ColumnraidPDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which …
1.3.6.1.4.1.789.1.6.10.1.12ColumnraidPSecondaryDiskNameread-onlydeprecatedThe name identifying the secondary path to the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecat…
1.3.6.1.4.1.789.1.6.10.1.13ColumnraidPSecondaryDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate whic…
1.3.6.1.4.1.789.1.6.10.1.14ColumnraidPScsiAdapterread-onlydeprecatedThe identifier of the SCSI adapter for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.10.1.15ColumnraidPScsiIdread-onlydeprecatedThe identifier for the referenced disk drive on the referenced SCSI adapter. This OID is not available from the Cluster management interfaces. This object is d…
1.3.6.1.4.1.789.1.6.10.1.16ColumnraidPDiskIdread-onlydeprecatedThe disk identifier for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.10.1.17ColumnraidPShelfread-onlycurrentNumber identifying the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.10.1.18ColumnraidPBayread-onlycurrentNumber identifying the disk bay within the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.10.1.19ColumnraidPSectorSizeread-onlycurrentA number that specifies bytes per sector for this entry. Values are '512' or '520'.
1.3.6.1.4.1.789.1.6.10.1.20ColumnraidPUsedMbread-onlycurrentThe number of MBytes currently in use on the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.21ColumnraidPUsedBlocksread-onlydeprecatedThe number of Blocks currently in use on the referenced disk drive. This object is deprecated. Use raidP64UsedBlocks object instead.
1.3.6.1.4.1.789.1.6.10.1.22ColumnraidPTotalMbread-onlycurrentThe number of MBytes physically available on the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.23ColumnraidPTotalBlocksread-onlydeprecatedThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use raidP64TotalBlocks object instead.
1.3.6.1.4.1.789.1.6.10.1.24ColumnraidPCompletionPerCentread-onlycurrentIn the case when rapid raid recovery, disk copy, reconstruction or adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstr…
1.3.6.1.4.1.789.1.6.10.1.25ColumnraidPDiskSerialNumberread-onlycurrentSerial number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.26ColumnraidPDiskVendorread-onlycurrentThe vendor of the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.27ColumnraidPDiskModelread-onlycurrentModel string of the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.28ColumnraidPDiskFirmwareRevisionread-onlycurrentFirmware revision number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.29ColumnraidPDiskRPMread-onlycurrentRPM of the referenced disk drive.
1.3.6.1.4.1.789.1.6.10.1.30ColumnraidPDiskTyperead-onlycurrentInterface type of the referenced disk drive. e.g SCSI, or ATA.
1.3.6.1.4.1.789.1.6.10.1.31ColumnraidPDiskPoolread-onlycurrentA name that identifies the disk pool that this entry belongs to.
1.3.6.1.4.1.789.1.6.10.1.32ColumnraidPDiskCopyDestDiskNameread-onlycurrentWhen raidPStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.
1.3.6.1.4.1.789.1.6.10.1.33ColumnraidP64UsedBlocksread-onlycurrentThe number of Blocks currently in use on the referenced disk drive. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.6.10.1.34ColumnraidP64TotalBlocksread-onlycurrentThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.6.10.1.35ColumnraidPCarrierIDread-onlycurrentUnique identifier of the disk carrier.
1.3.6.1.4.1.789.1.6.11TableplexTablenot-accessiblecurrentA table containing plex specific information.
1.3.6.1.4.1.789.1.6.11.1RowplexEntrynot-accessiblecurrentProvide a report on file system plexes.
1.3.6.1.4.1.789.1.6.11.1.1ColumnplexIndexread-onlycurrentA number that identifies this entry for the referenced plex.
1.3.6.1.4.1.789.1.6.11.1.2ColumnplexNameread-onlycurrentThe identifier of the plex.
1.3.6.1.4.1.789.1.6.11.1.3ColumnplexVolNameread-onlycurrentThe aggregate to which this plex belongs.
1.3.6.1.4.1.789.1.6.11.1.4ColumnplexStatusread-onlycurrentThe status of the plex.
1.3.6.1.4.1.789.1.6.11.1.5ColumnplexPercentResyncingread-onlycurrentIf the plex is resyncing, the percent completion of the resync.
1.3.6.1.4.1.789.1.6.12ScalaroutOfDateDiskCountread-onlycurrentNumber of entries in the outOfDateDiskTable table.
1.3.6.1.4.1.789.1.6.13TableoutOfDateDiskTablenot-accessiblecurrentDisplay out-of-date disk information.
1.3.6.1.4.1.789.1.6.13.1RowoutOfDateDiskEntrynot-accessiblecurrentDisplay information for the referenced out-of-date disk.
1.3.6.1.4.1.789.1.6.13.1.1ColumnoutOfDateDiskIndexread-onlycurrentA number that identifies this entry for the referenced disk drive in the list of out-of-date disk drives.
1.3.6.1.4.1.789.1.6.13.1.2ColumnoutOfDateDiskDiskNameread-onlycurrentThe name identifying the referenced disk drive.
1.3.6.1.4.1.789.1.6.13.1.3ColumnoutOfDateDiskDiskIdread-onlydeprecatedThe disk identifier for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.13.1.4ColumnoutOfDateDiskScsiAdapterread-onlydeprecatedThe identifier of the SCSI adapter for the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecated.
1.3.6.1.4.1.789.1.6.13.1.5ColumnoutOfDateDiskScsiIdread-onlydeprecatedThe identifier for the referenced disk drive on the referenced SCSI adapter. This OID is not available from the Cluster management interfaces. This object is d…
1.3.6.1.4.1.789.1.6.13.1.6ColumnoutOfDateDiskTotalMbread-onlycurrentThe number of MBytes physically available on the referenced disk drive.
1.3.6.1.4.1.789.1.6.13.1.7ColumnoutOfDateDiskTotalBlocksread-onlydeprecatedThe number of Blocks physically available on the referenced disk drive. This object is deprecated. Use outOfDateDisk64TotalBlocks object instead.
1.3.6.1.4.1.789.1.6.13.1.8ColumnoutOfDateDiskDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which …
1.3.6.1.4.1.789.1.6.13.1.9ColumnoutOfDateDiskSecondaryDiskNameread-onlydeprecatedThe name identifying the secondary path to the referenced disk drive. This OID is not available from the Cluster management interfaces. This object is deprecat…
1.3.6.1.4.1.789.1.6.13.1.10ColumnoutOfDateDiskSecondaryDiskPortread-onlydeprecatedA number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate whic…
1.3.6.1.4.1.789.1.6.13.1.11ColumnoutOfDateDiskShelfread-onlycurrentNumber identifying the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.13.1.12ColumnoutOfDateDiskBayread-onlycurrentNumber identifying the disk bay within the shelf where the disk is located.
1.3.6.1.4.1.789.1.6.13.1.13ColumnoutOfDateDiskPoolread-onlycurrentA name that identifies the disk pool that this entry belongs to.
1.3.6.1.4.1.789.1.6.13.1.14ColumnoutOfDateDiskSectorSizeread-onlycurrentA number that specifies bytes per sector for this entry. Values are '512' or '520'.
1.3.6.1.4.1.789.1.6.13.1.15ColumnoutOfDateDiskSerialNumberread-onlycurrentSerial number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.13.1.16ColumnoutOfDateDiskVendorread-onlycurrentThe vendor of the referenced disk drive.
1.3.6.1.4.1.789.1.6.13.1.17ColumnoutOfDateDiskModelread-onlycurrentModel string of the referenced disk drive.
1.3.6.1.4.1.789.1.6.13.1.18ColumnoutOfDateDiskFirmwareRevisionread-onlycurrentFirmware revision number of the referenced disk drive.
1.3.6.1.4.1.789.1.6.13.1.19ColumnoutOfDateDiskRPMread-onlycurrentRPM of the referenced disk drive.
1.3.6.1.4.1.789.1.6.13.1.20ColumnoutOfDateDiskTyperead-onlycurrentInterface type of the referenced disk drive. e.g SCSI, or ATA.
1.3.6.1.4.1.789.1.6.13.1.21ColumnoutOfDateDisk64TotalBlocksread-onlycurrentThe number of Blocks physically available on the referenced disk drive. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.6.13.1.22ColumnoutOfDateDiskCarrierIDread-onlycurrentUnique identifier of the disk carrier.
1.3.6.1.4.1.789.1.6.13.1.23ColumnoutOfDateDiskDrawerread-onlycurrentUsed for shelves with drawers. Number identifying the physical drawer where the disk is located.
1.3.6.1.4.1.789.1.6.13.1.24ColumnoutOfDateDiskDrawerSlotread-onlycurrentUsed for shelves with drawers. Identifies which slot in the drawer this disk is located.
1.3.6.1.4.1.789.1.7Nodecifs
1.3.6.1.4.1.789.1.7.1NodecifsOptions
1.3.6.1.4.1.789.1.7.1.1ScalarcifsIsEnabledread-onlycurrentWhether the CIFS protocol is active on the filer.
1.3.6.1.4.1.789.1.7.1.2ScalarcifsIsLoginEnabledread-onlycurrentWhether new CIFS connections to the filer are currently allowed.
1.3.6.1.4.1.789.1.7.1.3ScalarcifsHostNameread-onlycurrentThe host name used by the CIFS protocol on this filer.
1.3.6.1.4.1.789.1.7.1.4ScalarcifsAltNamesread-onlycurrentAlternate names recognized by the filer.
1.3.6.1.4.1.789.1.7.1.5ScalarcifsDomainJoinedread-onlycurrentHas the filer joined an NT domain? If this value is true, cifsDomainName will contain the name of the domain. Otherwise, the filer may have joined a WorkGroup,…
1.3.6.1.4.1.789.1.7.1.6ScalarcifsDomainNameread-onlycurrentThe domain name used by the CIFS protocol on this filer.
1.3.6.1.4.1.789.1.7.1.7ScalarcifsWGNameread-onlycurrentThe workgroup name (if any) used by the CIFS protocol on this filer.
1.3.6.1.4.1.789.1.7.1.8ScalarcifsDCNameread-onlycurrentThe name of the Domain Controller used by this filer to authenticate users and file requests.
1.3.6.1.4.1.789.1.7.1.9ScalarcifsIsWinsEnabledread-onlycurrentTrue if WINS name resolution is enabled on the filer.
1.3.6.1.4.1.789.1.7.1.10ScalarcifsWinsServersread-onlycurrentThe name(s) of the WINS servers registered with the filer.
1.3.6.1.4.1.789.1.7.1.11ScalarcifsSecurityModelread-onlycurrentWhich type of authentication semantics (Unix or PC) are in use for PC access to Unix files on the filer. If Unix semantics are in use, no ACL on a Unix file is…
1.3.6.1.4.1.789.1.7.1.12ScalarcifsPCGenericUserread-onlycurrentThe name of the generic PC user, if any. This username is used for CIFS access by Unix users who have not authenticated through CIFS or NT.
1.3.6.1.4.1.789.1.7.1.15ScalarcifsOplocksEnabledread-onlycurrentWhether oplocks are enabled on the filer.
1.3.6.1.4.1.789.1.7.1.16ScalarcifsLevel2OplocksEnabledread-onlycurrentWhether level 2 oplocks are enabled on the filer.
1.3.6.1.4.1.789.1.7.1.17ScalarcifsPreserveCaseread-onlycurrentIf this option is set to preserve-case (the default), all filename references will be case preserving. Otherwise, they are forced to lowercase.
1.3.6.1.4.1.789.1.7.1.19ScalarcifsSymlinksEnabledread-onlycurrentIf this option is enabled, CIFS accesses will follow symbolic links using Unix semantics.
1.3.6.1.4.1.789.1.7.1.20ScalarcifsSymlinkCycleProtEnabledread-onlycurrentIf this option is enabled, CIFS accesses will through symbolic links will check for cycles in the link graph.
1.3.6.1.4.1.789.1.7.1.21ScalarcifsIsLicensedread-onlycurrentWhether the CIFS protocol is licensed on the filer.
1.3.6.1.4.1.789.1.7.1.22ScalarcifsPerClientStatsEnabledread-onlycurrentTrue when cifs.per_client_stats are being collected.
1.3.6.1.4.1.789.1.7.2NodecifsInfo
1.3.6.1.4.1.789.1.7.2.1ScalarcifsStatusread-onlycurrentEncoding of CIFS startup state on the filer.
1.3.6.1.4.1.789.1.7.2.2ScalarcifsNeedPWread-onlycurrentDoes the administrative password need to be set before start?
1.3.6.1.4.1.789.1.7.2.3ScalarcifsTimeToShutdownread-onlycurrentTime remaining until CIFS shutdown
1.3.6.1.4.1.789.1.7.2.4ScalarcifsMaxConnectionsread-onlycurrentThe maximum number of simultaneous CIFS connections allowed on the filer.
1.3.6.1.4.1.789.1.7.2.5ScalarcifsMaxTreesread-onlycurrentThe maximum number of simultaneous CIFS trees allowed on the filer.
1.3.6.1.4.1.789.1.7.2.6ScalarcifsMaxSharesread-onlycurrentThe maximum number of simultaneous CIFS shares allowed on the filer.
1.3.6.1.4.1.789.1.7.2.7ScalarcifsMaxFilesread-onlycurrentThe maximum number of concurrently open CIFS files and directories allowed on the filer.
1.3.6.1.4.1.789.1.7.2.8ScalarcifsMaxACLsread-onlycurrentThis object is deprecated, and always has a value of 0.
1.3.6.1.4.1.789.1.7.2.9ScalarcifsConnectedUsersread-onlycurrentThe current number of CIFS users on the filer.
1.3.6.1.4.1.789.1.7.2.10ScalarcifsNTreesread-onlycurrentThe current number of CIFS trees on the filer.
1.3.6.1.4.1.789.1.7.2.11ScalarcifsNSharesread-onlycurrentThe current number of CIFS shares on the filer.
1.3.6.1.4.1.789.1.7.2.12ScalarcifsNSessionsread-onlycurrentThe current number of active CIFS sessions on the filer.
1.3.6.1.4.1.789.1.7.2.13ScalarcifsNOpenFilesread-onlycurrentThe number of open CIFS files and directories on the filer.
1.3.6.1.4.1.789.1.7.2.14ScalarcifsNOpenDirsread-onlycurrentThe number of open CIFS directories on the filer.
1.3.6.1.4.1.789.1.7.2.16ScalarcifsNOplockBreakWaitsread-onlycurrentThe number of open files waiting for oplock break messages to be sent.
1.3.6.1.4.1.789.1.7.2.17ScalarcifsNOplockAckWaitsread-onlycurrentThe number of open files waiting for acknowledgements to oplock break messages.
1.3.6.1.4.1.789.1.7.2.18ScalarcifsSuspectOpsread-onlycurrentA smoothed average of the number of events per second of the type frequently seen during virus attacks.
1.3.6.1.4.1.789.1.7.2.19ScalarcifsNDomainControllersread-onlycurrentThe number of Domain Controllers found.
1.3.6.1.4.1.789.1.7.3NodecifsStats
1.3.6.1.4.1.789.1.7.3.1NodecifsServ
1.3.6.1.4.1.789.1.7.3.1.1NodecifsOps
1.3.6.1.4.1.789.1.7.3.1.1.1ScalarcifsTotalOpsread-onlycurrentThe number of CIFS operations done by the filer, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.1.2ScalarcifsTotalCallsread-onlycurrentThe total number of CIFS calls received, since the last time the statistics were cleared. This is the number of cifsTotalOps plus the number of miscellaneous o…
1.3.6.1.4.1.789.1.7.3.1.1.3ScalarcifsBadCallsread-onlycurrentThe total number of received CIFS calls rejected, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.1.4ScalarcifsGetAttrsread-onlycurrentThe total number of CIFS operations to get the attributes on a file or directory, since the last time the statistics were reset.
1.3.6.1.4.1.789.1.7.3.1.1.5ScalarcifsReadsread-onlycurrentThe total number of CIFS Read operations on a file or directory, since the last time the statistics were reset.
1.3.6.1.4.1.789.1.7.3.1.1.6ScalarcifsWritesread-onlycurrentThe total number of CIFS write operations on a file or directory, since the last time the statistics were reset.
1.3.6.1.4.1.789.1.7.3.1.1.7ScalarcifsLocksread-onlycurrentThe number of CIFS file locking requests since the last time the statistics were reset.
1.3.6.1.4.1.789.1.7.3.1.1.8ScalarcifsOpensread-onlycurrentThe number of calls, via CIFS, to open a file or directory, since the last time the statistics were reset.
1.3.6.1.4.1.789.1.7.3.1.1.9ScalarcifsDirOpsread-onlycurrentThe number of CIFS directory operations, since the last time the statistics were reset.
1.3.6.1.4.1.789.1.7.3.1.1.10ScalarcifsOthersread-onlycurrentThe number of CIFS operations, since the last time the statistics were reset, that don't fall into the categories for GetAttr, SetAttr, Read, Write, Lock, DirO…
1.3.6.1.4.1.789.1.7.3.1.1.11ScalarcifsSetAttrsread-onlycurrentThe total number of CIFS operations to set the attributes on a file or directory, since the last time the statistics were reset.
1.3.6.1.4.1.789.1.7.3.1.2NodecifsReqs
1.3.6.1.4.1.789.1.7.3.1.2.1ScalarsmbNegProtsread-onlycurrentThe number of SMB NEGOTIATE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.2ScalarsmbSessionSetupAndXsread-onlycurrentThe number of SMB SESSION_SETUP_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.3ScalarsmbLogoffAndXsread-onlycurrentThe number of SMB LOGOFF_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.4ScalarsmbTreeConnectAndXsread-onlycurrentThe number of SMB TREE_CONNECT_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.5ScalarsmbTreeDisconnectsread-onlycurrentThe number of SMB TREE_DISCONNECT requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.6ScalarsmbTrans2QueryFSInfosread-onlycurrentThe number of SMB TRANS2_QUERY_FS_INFORMATION requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.7ScalarsmbEchosread-onlycurrentThe number of SMB ECHO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.8ScalarsmbNTCancelsread-onlycurrentThe number of SMB NT_CANCEL requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.9ScalarsmbNTCreateAndXsread-onlycurrentThe number of SMB NT_CREATE_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.10ScalarsmbNTTransactCreatesread-onlycurrentThe number of SMB NT_TRANSACT_CREATE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.11ScalarsmbCreateTemporariesread-onlycurrentThe SMB CREATE_TEMPORARY operation is not presently supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.12ScalarsmbReadAndXsread-onlycurrentThe number of SMB READ_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.13ScalarsmbWriteAndXsread-onlycurrentThe number of SMB WRITE_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.14ScalarsmbLockingAndXsread-onlycurrentThe number of SMB LOCKING_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.15ScalarsmbSeeksread-onlycurrentThe number of SMB SEEK requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.16ScalarsmbFlushesread-onlycurrentThe number of SMB FLUSH requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.17ScalarsmbClosesread-onlycurrentThe number of SMB CLOSE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.18ScalarsmbDeletesread-onlycurrentThe number of SMB DELETE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.19ScalarsmbRenamesread-onlycurrentThe number of SMB RENAME requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.20ScalarsmbMovesread-onlycurrentThe SMB MOVE request is not presently supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.21ScalarsmbCopiesread-onlycurrentThe SMB COPY request is not presently supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.22ScalarsmbTrans2QueryPathInfosread-onlycurrentThe number of SMB TRANS2_QUERY_PATH_INFORMATION requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.23ScalarsmbTrans2QueryFileInfosread-onlycurrentThe number of SMB TRANS2_QUERY_FILE_INFORMATION requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.24ScalarsmbTrans2SetPathInfosread-onlycurrentThe number of SMB TRANS2_SET_PATH_INFORMATION requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.25ScalarsmbTrans2SetFileInfosread-onlycurrentThe number of SMB TRANS2_SET_FILE_INFORMATION requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.26ScalarsmbDeleteDirsread-onlycurrentThe number of SMB DELETE_DIRECTORY requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.27ScalarsmbCheckDirsread-onlycurrentThe SMB COPY request is not presently supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.28ScalarsmbTrans2FindFirst2sread-onlycurrentThe number of SMB TRANS2_FIND_FIRST2 requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.29ScalarsmbTrans2FindNext2sread-onlycurrentThe number of SMB TRANS2_FIND_NEXT2 requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.30ScalarsmbFindClose2sread-onlycurrentThe number of SMB FIND_CLOSE2 requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.31ScalarsmbNTTransactNotifyChgsread-onlycurrentThe number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.32ScalarsmbTrans2GetDFSReferralsread-onlycurrentThe SMB TRANS2_GET_DFS_REFERRAL request is not presently supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.33ScalarsmbTrans2ReportDFSIncsread-onlycurrentThe SMB TRANS2_REPORT_DFS_INCONSISTENCY request is not presently supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.34ScalarsmbOpenPrintFilesread-onlycurrentThe SMB OPEN_PRINT_FILE request is not supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.35ScalarsmbGetPrintQueuesread-onlycurrentThe SMB GET_PRINT_QUEUE request is not supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.2.36ScalarsmbNTTransactIoctlsread-onlycurrentThe number of SMB NT_TRANSACT_IOCTL requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.37ScalarsmbNTTransactQuerySecDescsread-onlycurrentThe number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.38ScalarsmbNTTransactSetSecDescsread-onlycurrentThe number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.39ScalarsmbTrans2CreateDirsread-onlycurrentThe number of SMB TRANS2_CREATE_DIRECTORY requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.40ScalarsmbNTCancelCNsread-onlycurrentThe number of SMB NT_CANCEL requests against change notifications since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.41ScalarsmbNTCancelOthersread-onlycurrentThe number of SMB NT_CANCEL requests against operations other than change notifications, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.42Scalarsmb2Echosread-onlycurrentThe number of SMB2 ECHO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.43Scalarsmb2NegProtsread-onlycurrentThe number of SMB2 NEGOTIATE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.44Scalarsmb2SessionSetupsread-onlycurrentThe number of SMB2 SESSION_SETUP requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.45Scalarsmb2Logoffsread-onlycurrentThe number of SMB2 LOGOFF requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.46Scalarsmb2TreeConnectsread-onlycurrentThe number of SMB2 TREE_CONNECT requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.47Scalarsmb2TreeDisconnectsread-onlycurrentThe number of SMB2 TREE_DISCONNECT requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.48Scalarsmb2Cancelsread-onlycurrentThe number of SMB2 CANCEL requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.49Scalarsmb2Createsread-onlycurrentThe number of SMB2 CREATE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.50Scalarsmb2IpcCreatesread-onlycurrentThe number of SMB2 IPC CREATE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.51Scalarsmb2Readsread-onlycurrentThe number of SMB2 READ requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.52Scalarsmb2Writesread-onlycurrentThe number of SMB2 WRITE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.53Scalarsmb2IpcReadsread-onlycurrentThe number of SMB2 IPC READ requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.54Scalarsmb2IpcWritesread-onlycurrentThe number of SMB2 IPC WRITE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.55Scalarsmb2Locksread-onlycurrentThe number of SMB2 LOCK requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.56Scalarsmb2UnLocksread-onlycurrentThe number of SMB2 UNLOCK requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.57Scalarsmb2OplkBrkAckread-onlycurrentThe number of SMB2 Oplock Break Acknowledgements, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.58Scalarsmb2Flushsread-onlycurrentThe number of SMB2 FLUSH requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.59Scalarsmb2Closesread-onlycurrentThe number of SMB2 CLOSE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.60Scalarsmb2QueryFileBasicInfosread-onlycurrentThe number of SMB2 QUERY_FILE_BASIC_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.61Scalarsmb2QueryFileStandardInfosread-onlycurrentThe number of SMB2 QUERY_FILE_STANDARD_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.62Scalarsmb2QueryFileInternalInfosread-onlycurrentThe number of SMB2 QUERY_FILE_INT_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.63Scalarsmb2QueryFileEAInfosread-onlycurrentThe number of SMB2 QUERY_FILE_EA_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.64Scalarsmb2QueryFileFullEAInfosread-onlycurrentThe number of SMB2 QUERY_FILE_FULL_EA_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.65Scalarsmb2QueryFileModeInfosread-onlycurrentThe number of SMB2 QUERY_FILE_MODE_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.66Scalarsmb2QueryFileAltNamesread-onlycurrentThe number of SMB2 QUERY_FILE_ALT_NAME_INFO_ requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.67Scalarsmb2QueryFileStreamInfosread-onlycurrentThe number of SMB2 QUERY_FILE_STREAM_INFO_ requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.68Scalarsmb2QueryFileNetOpenInfosread-onlycurrentThe number of SMB2 QUERY_FILE_NET_OPEN_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.69Scalarsmb2QueryFileAttrTagInfosread-onlycurrentThe number of SMB2 QUERY_FILE_ATTR_TAG_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.70Scalarsmb2QueryFileUnsupportedsread-onlycurrentThe number of SMB2 Unsupported QUERY_FILE_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.71Scalarsmb2QueryFileInvalidsread-onlycurrentThe number of SMB2 invalid QUERY_FILE_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.72Scalarsmb2QueryFsVolInfosread-onlycurrentThe number of SMB2 QUERY_FS_VOLUME_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.73Scalarsmb2QueryFsSizeInfosread-onlycurrentThe number of SMB2 QUERY_FS_SIZE_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.74Scalarsmb2QueryFsDeviceInfosread-onlycurrentThe number of SMB2 QUERY_FS_DEVICE_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.75Scalarsmb2QueryFsAttrInfosread-onlycurrentThe number of SMB2 QUERY_FS_ATTR_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.76Scalarsmb2QueryFsFullSizeInfosread-onlycurrentThe number of SMB2 QUERY_FS_FULL_SIZE_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.77Scalarsmb2QueryFsObjectIdInfosread-onlycurrentThe number of SMB2 QUERY_FS_OBJECT_ID_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.78Scalarsmb2QueryFsInvalidsread-onlycurrentThe number of SMB2 invalid QUERY_FS_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.79Scalarsmb2SetBasicInfosread-onlycurrentThe number of SMB2 SET_BASIC_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.80Scalarsmb2SetRenameInfosread-onlycurrentThe number of SMB2 SET_FILE_RENAME_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.81Scalarsmb2SetFileLinkInfosread-onlycurrentThe number of SMB2 SET_FILE_LINK_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.82Scalarsmb2SetFileDispInfosread-onlycurrentThe number of SMB2 SET_FILE_DISP_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.83Scalarsmb2SetFullEaInfosread-onlycurrentThe number of SMB2 SET_FULL_EA_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.84Scalarsmb2SetModeInfosread-onlycurrentThe number of SMB2 SET_MODE_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.85Scalarsmb2SetAllocInfosread-onlycurrentThe number of SMB2 SET_ALLOC_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.86Scalarsmb2SetEofInfosread-onlycurrentThe number of SMB2 SET_EOF_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.87Scalarsmb2SetInfoUnsupportedsread-onlycurrentThe number of SMB2 Unsupported SET_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.88Scalarsmb2SetInfoInvalidsread-onlycurrentThe number of invalid SMB2 SET_INFO received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.89Scalarsmb2FsctlPipeTransceivesread-onlycurrentThe number of SMB2 FSCTL_PIPE_TRANSCEIVE received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.90Scalarsmb2FsctlPipePeeksread-onlycurrentThe number of SMB2 FSCTL_PIPE_PEEK received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.91Scalarsmb2FsctlEnumSnapshotssread-onlycurrentThe number of SMB2 FSCTL_ENUMERATE_SNAPSHOTS received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.92Scalarsmb2FsctlDfsReferralssread-onlycurrentThe number of SMB2 FSCTL_DFS_REFERRALS received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.93Scalarsmb2FsctlSetSparsesread-onlycurrentThe number of SMB2 FSCTL_SET_SPARSE received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.94Scalarsmb2FsctlSecureSharesread-onlycurrentThe number of SMB2 FSCTL_SECURE_SHARE received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.95Scalarsmb2FsctlFileUnsupportedsread-onlycurrentThe number of Unsupported SMB2 File FSCTL received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.96Scalarsmb2FsctlIpcUnsupportedsread-onlycurrentThe number of Unsupported SMB2 IPC FSCTL received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.97Scalarsmb2QueryDirsread-onlycurrentThe number of SMB2 QUERY_DIR received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.98Scalarsmb2ChgNfysread-onlycurrentThe number of SMB2 CHANGE_NOTIFY received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.99Scalarsmb2QuerySecurityInfosread-onlycurrentThe number of SMB2 QUERY_INFO SECURITY requests received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.100Scalarsmb2SetSecurityInfosread-onlycurrentThe number of SMB2 SET_INFO SECURITY requests received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.2.101Scalarsmb2QueryFileAccessInfosread-onlycurrentThe number of SMB2 QUERY_FILE_ACCESS_INFO requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3NodecifsPercent
1.3.6.1.4.1.789.1.7.3.1.3.1ScalarsmbNegProtPctread-onlycurrentThe number of SMB NEGOTIATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.2ScalarsmbSessionSetupAndXPctread-onlycurrentThe number of SMB SESSION_SETUP_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.3ScalarsmbLogoffAndXPctread-onlycurrentThe number of SMB LOGOFF_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.4ScalarsmbTreeConnectAndXPctread-onlycurrentThe number of SMB TREE_CONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.5ScalarsmbTreeDisconnectAndXPctread-onlycurrentThe number of SMB TREE_DISCONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.6ScalarsmbTrans2QueryFSInfoPctread-onlycurrentThe number of SMB TRANS2_QUERY_FS_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.7ScalarsmbEchoPctread-onlycurrentThe number of SMB ECHO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.8ScalarsmbNTCancelPctread-onlycurrentThe number of SMB NT_CANCEL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.9ScalarsmbCreateAndXPctread-onlycurrentThe number of SMB NT_CREATE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.10ScalarsmbTransactCreatePctread-onlycurrentThe number of SMB NT_TRANSACT_CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.11ScalarsmbCreateTemporaryPctread-onlycurrentThe number of SMB CREATE_TEMPORARY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.12ScalarsmbReadAndXPctread-onlycurrentThe number of SMB READ_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.13ScalarsmbWriteAndXPctread-onlycurrentThe number of SMB WRITE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.14ScalarsmbLockingAndXPctread-onlycurrentThe number of SMB LOCKING_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.15ScalarsmbSeekPctread-onlycurrentThe number of SMB SEEK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.16ScalarsmbFlushPctread-onlycurrentThe number of SMB FLUSH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.17ScalarsmbClosePctread-onlycurrentThe number of SMB CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.18ScalarsmbDeletePctread-onlycurrentThe number of SMB DELETE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.19ScalarsmbRenamePctread-onlycurrentThe number of SMB RENAME requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.20ScalarsmbMovePctread-onlycurrentThe number of SMB MOVE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.21ScalarsmbCopyPctread-onlycurrentThe number of SMB COPY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.22ScalarsmbTrans2QueryPathInfoPctread-onlycurrentThe number of SMB TRANS2_QUERY_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.23ScalarsmbTrans2QueryFileInfoPctread-onlycurrentThe number of SMB TRANS2_QUERY_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.24ScalarsmbTrans2SetPathInfoPctread-onlycurrentThe number of SMB TRANS2_SET_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.25ScalarsmbTrans2SetFileInfoPctread-onlycurrentThe number of SMB TRANS2_SET_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.26ScalarsmbDeleteDirPctread-onlycurrentThe number of SMB DELETE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.27ScalarsmbCheckDirPctread-onlycurrentThe number of SMB CHECK_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.28ScalarsmbTrans2FindFirst2Pctread-onlycurrentThe number of SMB TRANS2_FIND_FIRST2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.29ScalarsmbTrans2FindNext2Pctread-onlycurrentThe number of SMB TRANS2_FIND_NEXT2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.30ScalarsmbFindClose2Pctread-onlycurrentThe number of SMB FIND_CLOSE2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.31ScalarsmbNTTransactNotifyChgPctread-onlycurrentThe number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.32ScalarsmbTrans2GetDFSReferralPctread-onlycurrentThe number of SMB TRANS2_GET_DFS_REFERRAL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.33ScalarsmbTrans2ReportDFSIncPctread-onlycurrentThe number of SMB TRANS2_REPORT_DFS_INCONSISTENCY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.34ScalarsmbOpenPrintFilePctread-onlycurrentThe number of SMB OPEN_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.35ScalarsmbGetPrintQueuePctread-onlycurrentThe number of SMB GET_PRINT_QUEUE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.36ScalarsmbNTTransactIoctlPctread-onlycurrentThe number of SMB NT_TRANSACT_IOCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.37ScalarsmbNTTransactQuerySecDescPctread-onlycurrentThe number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.38ScalarsmbNTTransactSetSecDescPctread-onlycurrentThe number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.39ScalarsmbTrans2CreateDirPctread-onlycurrentThe number of SMB TRANS2_CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.40ScalarsmbNTCancelCNPctread-onlycurrentThe number of SMB NT_CANCEL requests against change notifications, as a percentage of total CIFS calls received, since the last time the statistics were cleare…
1.3.6.1.4.1.789.1.7.3.1.3.41ScalarsmbNTCancelOtherPctread-onlycurrentThe number of SMB NT_CANCEL requests against calls other than change notifications, as a percentage of total CIFS calls received, since the last time the stati…
1.3.6.1.4.1.789.1.7.3.1.3.42Scalarsmb2EchoPctread-onlycurrentThe number of SMB2 ECHO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.43Scalarsmb2NegProtPctread-onlycurrentThe number of SMB2 NEGOTIATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.44Scalarsmb2SessionSetupPctread-onlycurrentThe number of SMB2 SESSION_SETUP requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.45Scalarsmb2LogoffPctread-onlycurrentThe number of SMB2 LOGOFF requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.46Scalarsmb2TreeConnectPctread-onlycurrentThe number of SMB2 TREE_CONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.47Scalarsmb2TreeDisconnectPctread-onlycurrentThe number of SMB2 TREE_DISCONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.48Scalarsmb2CancelPctread-onlycurrentThe number of SMB2 CANCEL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.49Scalarsmb2CreatePctread-onlycurrentThe number of SMB2 CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.50Scalarsmb2IpcCreatePctread-onlycurrentThe number of SMB2 IPC CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.51Scalarsmb2ReadPctread-onlycurrentThe number of SMB2 READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.52Scalarsmb2WritePctread-onlycurrentThe number of SMB2 WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.53Scalarsmb2IpcReadPctread-onlycurrentThe number of SMB2 IPC READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.54Scalarsmb2IpcWritePctread-onlycurrentThe number of SMB2 IPC WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.55Scalarsmb2LockPctread-onlycurrentThe number of SMB2 LOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.56Scalarsmb2UnLockPctread-onlycurrentThe number of SMB2 UNLOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.57Scalarsmb2OplkBrkAckPctread-onlycurrentThe number of SMB2 Oplock Break Acknowledgement, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.58Scalarsmb2FlushPctread-onlycurrentThe number of SMB2 FLUSH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.59Scalarsmb2ClosePctread-onlycurrentThe number of SMB2 CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.60Scalarsmb2QueryFileBasicInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_BASIC_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.61Scalarsmb2QueryFileStandardInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_STANDARD_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.62Scalarsmb2QueryFileInternalInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_INT_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.63Scalarsmb2QueryFileEAInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_EA_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.64Scalarsmb2QueryFileFullEAInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_FULL_EA_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.65Scalarsmb2QueryFileModeInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_MODE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.66Scalarsmb2QueryFileAltNamePctread-onlycurrentThe number of SMB2 QUERY_FILE_ALT_NAME_INFO_ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.67Scalarsmb2QueryFileStreamInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_STREAM_INFO_ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.68Scalarsmb2QueryFileNetOpenInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_NET_OPEN_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.69Scalarsmb2QueryFileAttrTagInfoPctread-onlycurrentThe number of SMB2 QUERY_FILE_ATTR_TAG_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.70Scalarsmb2QueryFileUnsupportedPctread-onlycurrentThe number of SMB2 Unsupported QUERY_FILE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.71Scalarsmb2QueryFileInvalidPctread-onlycurrentThe number of SMB2 invalid QUERY_FILE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.72Scalarsmb2QueryFsVolInfoPctread-onlycurrentThe number of SMB2 QUERY_FS_VOLUME_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.73Scalarsmb2QueryFsSizeInfoPctread-onlycurrentThe number of SMB2 QUERY_FS_SIZE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.74Scalarsmb2QueryFsDeviceInfoPctread-onlycurrentThe number of SMB2 QUERY_FS_DEVICE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.75Scalarsmb2QueryFsAttrInfoPctread-onlycurrentThe number of SMB2 QUERY_FS_ATTR_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.76Scalarsmb2QueryFsFullSizeInfoPctread-onlycurrentThe number of SMB2 QUERY_FS_FULL_SIZE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.77Scalarsmb2QueryFsObjectIdInfoPctread-onlycurrentThe number of SMB2 QUERY_FS_OBJECT_ID_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.78Scalarsmb2QueryFsInvalidPctread-onlycurrentThe number of SMB2 invalid QUERY_FS_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.79Scalarsmb2SetBasicInfoPctread-onlycurrentThe number of SMB2 SET_BASIC_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.80Scalarsmb2SetRenameInfoPctread-onlycurrentThe number of SMB2 SET_FILE_RENAME_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.81Scalarsmb2SetFileLinkInfoPctread-onlycurrentThe number of SMB2 SET_FILE_LINK_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.82Scalarsmb2SetFileDispInfoPctread-onlycurrentThe number of SMB2 SET_FILE_DISP_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.83Scalarsmb2SetFullEaInfoPctread-onlycurrentThe number of SMB2 SET_FULL_EA_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.84Scalarsmb2SetModeInfoPctread-onlycurrentThe number of SMB2 SET_MODE_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.85Scalarsmb2SetAllocInfoPctread-onlycurrentThe number of SMB2 SET_ALLOC_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.86Scalarsmb2SetEofInfoPctread-onlycurrentThe number of SMB2 SET_EOF_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.87Scalarsmb2SetInfoUnsupportedPctread-onlycurrentThe number of SMB2 Unsupported SET_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.88Scalarsmb2SetInfoInvalidPctread-onlycurrentThe number of invalid SMB2 SET_INFO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.89Scalarsmb2FsctlPipeTransceivePctread-onlycurrentThe number of SMB2 FSCTL_PIPE_TRANSCEIVE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.90Scalarsmb2FsctlPipePeekPctread-onlycurrentThe number of SMB2 FSCTL_PIPE_PEEK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.91Scalarsmb2FsctlEnumSnapshotsPctread-onlycurrentThe number of SMB2 FSCTL_ENUMERATE_SNAPSHOTS requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.92Scalarsmb2FsctlDfsReferralsPctread-onlycurrentThe number of SMB2 FSCTL_DFS_REFERRALS requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.93Scalarsmb2FsctlSetSparsePctread-onlycurrentThe number of SMB2 FSCTL_SET_SPARSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.94Scalarsmb2FsctlSecureSharePctread-onlycurrentThe number of SMB2 FSCTL_SECURE_SHARE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.95Scalarsmb2FsctlFileUnsupportedPctread-onlycurrentThe number of Unsupported SMB2 File FSCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.96Scalarsmb2FsctlIpcUnsupportedPctread-onlycurrentThe number of Unsupported SMB2 IPC FSCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.3.97Scalarsmb2QueryDirPctread-onlycurrentThe number of SMB2 QUERY_DIR requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4NodecifsObsReqs
1.3.6.1.4.1.789.1.7.3.1.4.1ScalarobsSmbClosePrintFilesread-onlycurrentThe number of SMB CLOSE_PRINT_FILE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.2ScalarobsSmbCreatesread-onlycurrentThe number of SMB CREATE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.3ScalarobsSmbCreateDirsread-onlycurrentThe number of SMB CREATE_DIRECTORY requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.4ScalarobsSmbCreateNewsread-onlycurrentThe number of SMB CREATE_NEW requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.5ScalarobsSmbLockAndReadsread-onlycurrentThe number of SMB LOCK_AND_READ requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.6ScalarobsSmbLockByteRangesread-onlycurrentThe number of SMB LOCK_BYTE_RANGE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.7ScalarobsSmbOpensread-onlycurrentThe number of SMB OPEN requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.8ScalarobsSmbOpenAndXsread-onlycurrentThe number of SMB OPEN_ANDX requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.9ScalarobsSmbProcessExitsread-onlycurrentThe number of SMB PROCESS_EXIT requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.10ScalarobsSmbQueryInfosread-onlycurrentThe number of SMB QUERY_INFORMATION requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.11ScalarobsSmbQueryInfo2sread-onlycurrentThe number of SMB QUERY_INFORMATION2 requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.12ScalarobsSmbReadsread-onlycurrentThe number of SMB READ requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.13ScalarobsSmbReadMPXsread-onlycurrentThe SMB READ_MPX request is not supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.4.14ScalarobsSmbReadRawsread-onlycurrentThe number of SMB READ_RAW requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.15ScalarobsSmbSearchsread-onlycurrentThe number of SMB SEARCH requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.16ScalarobsSmbSetInfosread-onlycurrentThe number of SMB SET_INFORMATION requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.17ScalarobsSmbSetInfo2sread-onlycurrentThe number of SMB SET_INFORMATION2 requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.18ScalarobsSmbQueryInfoDisksread-onlycurrentThe number of SMB QUERY_INFORMATION_DISK requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.19ScalarobsSmbTrans2Open2sread-onlycurrentThe number of SMB TRANS2_OPEN2 requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.20ScalarobsSmbTreeConnectsread-onlycurrentThe number of SMB TREE_CONNECT requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.21ScalarobsSmbUnlockByteRangesread-onlycurrentThe number of SMB UNLOCK_BYTE_RANGE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.22ScalarobsSmbWritesread-onlycurrentThe number of SMB WRITE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.23ScalarobsSmbWriteAndUnlocksread-onlycurrentThe number of SMB WRITE_AND_UNLOCK requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.24ScalarobsSmbWriteAndClosesread-onlycurrentThe number of SMB WRITE_AND_CLOSE requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.4.25ScalarobsSmbWriteMPXsread-onlycurrentThe SMB WRITE_MPX request is not supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.4.26ScalarobsSmbWritePrintFilesread-onlycurrentThe SMB WRITE_PRINT_FILE request is not supported, so this value should always be zero.
1.3.6.1.4.1.789.1.7.3.1.4.27ScalarobsSmbWriteRawsread-onlycurrentThe number of SMB WRITE_RAW requests, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5NodecifsObsPercent
1.3.6.1.4.1.789.1.7.3.1.5.1ScalarobsSmbClosePrintFilePctread-onlycurrentThe number of SMB CLOSE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.2ScalarobsSmbCreatePctread-onlycurrentThe number of SMB CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.3ScalarobsSmbCreateDirPctread-onlycurrentThe number of SMB CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.4ScalarobsSmbCreateNewPctread-onlycurrentThe number of SMB CREATE_NEW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.5ScalarobsSmbLockAndReadPctread-onlycurrentThe number of SMB LOCK_AND_READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.6ScalarobsSmbLockByteRangePctread-onlycurrentThe number of SMB LOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.7ScalarobsSmbOpenPctread-onlycurrentThe number of SMB OPEN requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.8ScalarobsSmbOpenAndXPctread-onlycurrentThe number of SMB OPEN_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.9ScalarobsSmbProcessExitPctread-onlycurrentThe number of SMB PROCESS_EXIT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.10ScalarobsSmbQueryInfoPctread-onlycurrentThe number of SMB QUERY_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.11ScalarobsSmbQueryInfo2Pctread-onlycurrentThe number of SMB QUERY_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.12ScalarobsSmbReadPctread-onlycurrentThe number of SMB READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.13ScalarobsSmbReadMPXPctread-onlycurrentThe number of SMB READ_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.14ScalarobsSmbReadRawPctread-onlycurrentThe number of SMB READ_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.15ScalarobsSmbSearchPctread-onlycurrentThe number of SMB SEARCH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.16ScalarobsSmbSetInfoPctread-onlycurrentThe number of SMB SET_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.17ScalarobsSmbSetInfo2Pctread-onlycurrentThe number of SMB SET_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.18ScalarobsSmbQueryInfoDiskPctread-onlycurrentThe number of SMB QUERY_INFORMATION_DISK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.19ScalarobsSmbTrans2Open2Pctread-onlycurrentThe number of SMB TRANS2_OPEN2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.20ScalarobsSmbTreeConnectPctread-onlycurrentThe number of SMB TREE_CONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.21ScalarobsSmbUnlockByteRangePctread-onlycurrentThe number of SMB UNLOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.22ScalarobsSmbWritePctread-onlycurrentThe number of SMB WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.23ScalarobsSmbWriteAndUnlockPctread-onlycurrentThe number of SMB WRITE_AND_UNLOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.24ScalarobsSmbWriteAndClosePctread-onlycurrentThe number of SMB WRITE_AND_CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.25ScalarobsSmbWriteMPXPctread-onlycurrentThe number of SMB WRITE_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.26ScalarobsSmbWritePrintFilePctread-onlycurrentThe number of SMB WRITE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.3.1.5.27ScalarobsSmbWriteRawPctread-onlycurrentThe number of SMB WRITE_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
1.3.6.1.4.1.789.1.7.4NodecifsMisc
1.3.6.1.4.1.789.1.7.4.1ScalarcifsCancelLocksread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.2ScalarcifsWaitLocksread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.3ScalarcifsCopyToAlignsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.4ScalarcifsAlignedSmallsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.5ScalarcifsAlignedLargesread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.6ScalarcifsAlignedSmallRelsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.7ScalarcifsAlignedLargeRelsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.8ScalarcifsMbufWaitsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.9ScalarcifsNbtWaitsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.10ScalarcifsCwaWaitsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.11ScalarcifsMultipleVCsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.12ScalarcifsPDCUpcallsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.13ScalarcifsQueuedWriteRawsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.14ScalarcifsNBTDisconnectsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.15ScalarcifsSMBDisconnectsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.16ScalarcifsDupDisconnectsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.17ScalarcifsOpLkBatchToL2sread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.18ScalarcifsOpLkBatchToNonesread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.19ScalarcifsOpLkL2ToNonesread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.20ScalarcifsOpLkNoBreakAcksread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.21ScalarcifsOpLkIgnoredAcksread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.22ScalarcifsOpLkMultiWaitersread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.23ScalarcifsSharingErrorRetriesread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.24ScalarcifsOpLkWaiterTimedOutsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.25ScalarcifsOpLkDelayedBreaksread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.26ScalarcifsOpLkEarlyNFSsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.27ScalarcifsOpLkNFSWaitedsread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.28ScalarcifsMaxNFSBkWaiterCountread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.29ScalarcifsClearTextPasswdread-onlycurrentThis indicates whether the cifs clients are using clear text passwords when authenticating with the filer. If cifsDomainJoined is false and this variable is al…
1.3.6.1.4.1.789.1.7.4.30ScalarcifsSmb2MidUsedHashread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.31ScalarcifsSmb2MidUnusedHashread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.32ScalarcifsSmb2MidInvRejectread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.33ScalarcifsSmb2DurableCreateReceivedread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.34ScalarcifsSmb2DurableCreateSucceededread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.35ScalarcifsSmb2DurableReclaimReceivedread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.36ScalarcifsSmb2DurableReclaimSucceededread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.37ScalarcifsSmb2DurableHandlePreservedread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.38ScalarcifsSmb2DurableHandlePurgedread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.39ScalarcifsSmb2DurableHandleExpiredread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.40ScalarcifsSmb2FileDirInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.41ScalarcifsSmb2FileFullDirInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.42ScalarcifsSmb2FileIdFullDirInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.43ScalarcifsSmb2FileBothDirInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.44ScalarcifsSmb2FileIdBothDirInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.45ScalarcifsSmb2FileNamesInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.46ScalarcifsSmb2FileDirUnsupportedread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.47ScalarcifsSmb2QueryInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.48ScalarcifsSmb2SetInforead-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.49ScalarcifsSmb2Ioctlread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.50ScalarcifsSmb2RelatedCompRequestread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.51ScalarcifsSmb2UnRelatedCompRequestread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.52ScalarcifsSmb2FileRequestread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.53ScalarcifsSmb2PipeRequestread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.54ScalarcifsSmb2Unsupportedread-onlycurrentUndocumented
1.3.6.1.4.1.789.1.7.4.55ScalarcifsSmb2InvalidSignaturesread-onlycurrentNumber of CIFS SMB 2.0 messages received with incorrect signature.
1.3.6.1.4.1.789.1.8Nodenetcache
1.3.6.1.4.1.789.1.8.1NodencOptions
1.3.6.1.4.1.789.1.8.1.1ScalarncIsEnabledread-onlycurrentWhether Netcache is enabled on this system.
1.3.6.1.4.1.789.1.8.1.2ScalarncIsLicensedread-onlycurrentWhether Netcache is licensed on this system.
1.3.6.1.4.1.789.1.8.1.3NodencDnsOptions
1.3.6.1.4.1.789.1.8.1.3.1ScalarncDnsIsEnabledread-onlycurrentWhether the Domain Name System (DNS) is enabled on this system.
1.3.6.1.4.1.789.1.8.1.4NodencHttpOptions
1.3.6.1.4.1.789.1.8.1.4.1ScalarncHttpIsEnabledread-onlycurrentWhether HTTP is enabled on this system.
1.3.6.1.4.1.789.1.8.1.5NodencNntpOptions
1.3.6.1.4.1.789.1.8.1.5.1ScalarncNntpIsEnabledread-onlycurrentWhether NNTP is enabled on this system.
1.3.6.1.4.1.789.1.8.1.5.2ScalarncNntpIsLicensedread-onlycurrentWhether NNTP is licensed on this system.
1.3.6.1.4.1.789.1.8.1.6NodencStreamingOptions
1.3.6.1.4.1.789.1.8.1.6.1ScalarncStreamingMmsIsEnabledread-onlycurrentWhether Microsoft Media Services (MMS) is enabled on this system.
1.3.6.1.4.1.789.1.8.1.6.2ScalarncStreamingMmsIsLicensedread-onlycurrentWhether Microsoft Windows Media Service (MMS) is licensed on this system.
1.3.6.1.4.1.789.1.8.1.6.3ScalarncStreamingMmsProIsLicensedread-onlycurrentWhether Microsoft Windows Media Service Pro (MMS) is licensed on this system.
1.3.6.1.4.1.789.1.8.1.6.4ScalarncStreamingRtspIsEnabledread-onlycurrentWhether the Real Time Streaming Protocol (RTSP) is enabled on this system.
1.3.6.1.4.1.789.1.8.1.6.5ScalarncStreamingQuickTimeIsLicensedread-onlycurrentWhether QuickTime is licensed on this system.
1.3.6.1.4.1.789.1.8.1.6.6ScalarncStreamingRealIsLicensedread-onlycurrentWhether Real Media streaming is licensed on this system.
1.3.6.1.4.1.789.1.8.1.6.7ScalarncStreamingMmsUltraIsLicensedread-onlycurrentWhether Microsoft Windows Media Service Ultra (MMS) is licensed on this system.
1.3.6.1.4.1.789.1.8.1.6.8ScalarncStreamingRealProIsLicensedread-onlycurrentWhether Real Media Pro streaming is licensed on this system.
1.3.6.1.4.1.789.1.8.1.6.9ScalarncStreamingRealUltraIsLicensedread-onlycurrentWhether Real Media Ultra streaming is licensed on this system.
1.3.6.1.4.1.789.1.8.1.7NodencIcapOptions
1.3.6.1.4.1.789.1.8.1.7.1ScalarncIcapIsEnabledread-onlycurrentWhether ICAP v0.95 is enabled on this system.
1.3.6.1.4.1.789.1.8.1.7.2ScalarncIcapIsLicensedread-onlycurrentWhether ICAP is licensed on this system.
1.3.6.1.4.1.789.1.8.1.7.3ScalarncIcapv1IsEnabledread-onlycurrentWhether ICAP v1.0 is enabled on this system.
1.3.6.1.4.1.789.1.8.1.8NodencGrmOptions
1.3.6.1.4.1.789.1.8.1.8.1NodencGrmServerOptions
1.3.6.1.4.1.789.1.8.1.8.1.1ScalarncGrmServerIsEnabledread-onlycurrentWhether the Global Request Manager (GRM) Server is enabled on this system.
1.3.6.1.4.1.789.1.8.1.8.1.2ScalarncGrmServerIsLicensedread-onlycurrentWhether the Global Request Manager (GRM) Server is licensed on this system.
1.3.6.1.4.1.789.1.8.1.8.2NodencGrmAgentOptions
1.3.6.1.4.1.789.1.8.1.8.2.1ScalarncGrmAgentIsEnabledread-onlycurrentWhether the Global Request Manager (GRM) Agent enabled on this system.
1.3.6.1.4.1.789.1.8.1.8.2.2ScalarncGrmAgentIsLicensedread-onlycurrentWhether the Global Request Manager (GRM) Agent is licensed on this system.
1.3.6.1.4.1.789.1.8.1.9NodencCdOptions
1.3.6.1.4.1.789.1.8.1.9.1ScalarncCdIsEnabledread-onlycurrentWhether Content Director is enabled on this system.
1.3.6.1.4.1.789.1.8.1.10NodencHttpsProxyOptions
1.3.6.1.4.1.789.1.8.1.10.1ScalarncHttpsProxyIsEnabledread-onlycurrentWhether HTTPS is enabled on this system.
1.3.6.1.4.1.789.1.8.1.10.2ScalarncHttpsProxyIsLicensedread-onlycurrentWhether HTTPS is licensed on this system.
1.3.6.1.4.1.789.1.8.1.11NodencCmsOptions
1.3.6.1.4.1.789.1.8.1.11.1ScalarncCmsIsEnabledread-onlycurrentWhether CMS is enabled on this system.
1.3.6.1.4.1.789.1.8.2NodencInfo
1.3.6.1.4.1.789.1.8.2.1ScalarncVersionread-onlycurrentThe Netcache version string.
1.3.6.1.4.1.789.1.8.2.2ScalarncAdminPortread-onlycurrentNetcache Admin Port number - this is the first in the list of admin ports configured for the NetCache.
1.3.6.1.4.1.789.1.8.2.3Nodeaccelmonitor
1.3.6.1.4.1.789.1.8.2.3.1ScalaramNumberread-onlycurrentThe number of entries in the acceleration monitor table.
1.3.6.1.4.1.789.1.8.2.3.2ScalaramMonitorread-onlycurrentVariable for user defined SNMP traps to monitor whether there has been a status change of any of the acceleration servers that netcache is probing.
1.3.6.1.4.1.789.1.8.2.3.3ScalaramMonitorStringread-onlycurrentUsed in conjunction with amMonitor. This returns a string in format of: 'IP:port status' which reports the status of all the servers netcache is accelerating a…
1.3.6.1.4.1.789.1.8.2.3.4TableamTablenot-accessiblecurrentA list of acceleration server and port entries. The number of entries is given by the value of amNumber.
1.3.6.1.4.1.789.1.8.2.3.4.1RowamEntrynot-accessiblecurrentAn acceleration monitor entry contains: the server IP address, server port and the status.
1.3.6.1.4.1.789.1.8.2.3.4.1.1ColumnamIndexread-onlycurrentA unique value for each entry in the acceleration monitor table.
1.3.6.1.4.1.789.1.8.2.3.4.1.2ColumnamAddressread-onlycurrentThe IP address of the acceleration server the NetCache is monitoring.
1.3.6.1.4.1.789.1.8.2.3.4.1.3ColumnamPortread-onlycurrentThe corresponding port on the server that NetCache is monitoring.
1.3.6.1.4.1.789.1.8.2.3.4.1.4ColumnamStatusread-onlycurrentThe status of the service running on the server. active - in queue but no probes done yet. up - the server is reachable and responding to probes. down - the se…
1.3.6.1.4.1.789.1.8.2.4ScalarncLocalConfigChangedread-onlycurrentWhether the local configuration file on NetCache was changed without using DFM configuration management.
1.3.6.1.4.1.789.1.8.2.5ScalarncLocalConfigVersionread-onlycurrentThe current cache configuration's version.
1.3.6.1.4.1.789.1.8.2.6NodegrmMonitor
1.3.6.1.4.1.789.1.8.2.6.1ScalargrmMonitorToggleread-onlycurrentVariable for user defined SNMP traps to monitor whether there has been a status change of any of the GRM agents reporting to this GRM server.
1.3.6.1.4.1.789.1.8.2.6.2ScalargrmMonitorStringread-onlycurrentUsed in conjunction with grmMonitor. This returns a string in format of: 'IP status.' which reports the status of all the GRM agents reporting to this GRM serv…
1.3.6.1.4.1.789.1.8.2.7Nodetakeoverinfo
1.3.6.1.4.1.789.1.8.2.7.1ScalartakeoverAddrsread-onlycurrentIndicates the list of interfaces and their corresponding IP addresses of the partner NetCache that this appliance has taken over.
1.3.6.1.4.1.789.1.8.2.7.2ScalartakeoverModeread-onlycurrentIndicates the current takeover mode of this appliance.
1.3.6.1.4.1.789.1.8.2.7.3ScalartakeoverStatusread-onlycurrentIndicates the current status of the takeover partner of this appliance. up(1) indicates that the takeover partner is reachable. unknown(2) indicates that an un…
1.3.6.1.4.1.789.1.8.3NodencStats
1.3.6.1.4.1.789.1.8.3.1ScalarncObjectsStoredread-onlycurrentThe total number of objects stored currently.
1.3.6.1.4.1.789.1.8.3.2ScalarncBytesToClientsread-onlycurrentTotal bytes sent to clients
1.3.6.1.4.1.789.1.8.3.3ScalarncBytesFromClientsread-onlycurrentTotal bytes received from clients
1.3.6.1.4.1.789.1.8.3.4ScalarncBytesToServersread-onlycurrentTotal bytes sent to servers
1.3.6.1.4.1.789.1.8.3.5ScalarncBytesFromServersread-onlycurrentTotal bytes received from servers
1.3.6.1.4.1.789.1.8.3.6NodencHttp
1.3.6.1.4.1.789.1.8.3.6.1ScalarncHttpTotalRequestsread-onlycurrentTotal HTTP requests so far
1.3.6.1.4.1.789.1.8.3.6.2ScalarncHttpHitRequestsread-onlycurrentHTTP requests that resulted in hits so far
1.3.6.1.4.1.789.1.8.3.6.3ScalarncHttpMissRequestsread-onlycurrentHTTP requests that resulted in misses so far
1.3.6.1.4.1.789.1.8.3.6.4ScalarncHttpServConnsread-onlycurrentNumber of currently open TCP/IP connections to HTTP servers (active and idle)
1.3.6.1.4.1.789.1.8.3.6.5ScalarncHttpCliConnsread-onlycurrentNumber of currently open TCP/IP connections to HTTP clients (active and idle)
1.3.6.1.4.1.789.1.8.3.6.6ScalarncHttpBWSavingsread-onlycurrentBandwidth savings for HTTP requests
1.3.6.1.4.1.789.1.8.3.6.7ScalarncHttpObjHitrateread-onlycurrentObject Hitrate HTTP requests
1.3.6.1.4.1.789.1.8.3.6.8ScalarncHttpRespTimePerByteread-onlycurrentResponse time in milliseconds per byte for HTTP requests.
1.3.6.1.4.1.789.1.8.3.6.9ScalarncHttpAvgRespTimeread-onlycurrentAverage response time in milliseconds for all HTTP requests.
1.3.6.1.4.1.789.1.8.3.6.10ScalarncHttpAvgHitRespTimeread-onlycurrentAverage response time in milliseconds for HTTP hit requests.
1.3.6.1.4.1.789.1.8.3.6.11ScalarncHttpAvgMissRespTimeread-onlycurrentAverage response time in milliseconds for HTTP miss requests.
1.3.6.1.4.1.789.1.8.3.6.12ScalarncHttpInstAvgRespTimeread-onlycurrentAverage response time in milliseconds for all HTTP requests during the last 60 seconds.
1.3.6.1.4.1.789.1.8.3.6.13ScalarncHttpInstAvgHitRespTimeread-onlycurrentAverage response time in milliseconds for HTTP hit requests during the last 60 seconds.
1.3.6.1.4.1.789.1.8.3.6.14ScalarncHttpInstAvgMissRespTimeread-onlycurrentAverage response time in milliseconds for HTTP miss requests during the last 60 seconds.
1.3.6.1.4.1.789.1.8.3.6.15ScalarncHttpTotalRespTimeread-onlycurrentTotal fetch time in milliseconds for HTTP requests
1.3.6.1.4.1.789.1.8.3.6.16ScalarncHttpTotalHitRespTimeread-onlycurrentTotal fetch time in milliseconds for HTTP HIT requests
1.3.6.1.4.1.789.1.8.3.6.17ScalarncHttpTotalMissRespTimeread-onlycurrentTotal fetch time in milliseconds for HTTP MISS requests
1.3.6.1.4.1.789.1.8.3.6.18ScalarncHttpBytesToClientsread-onlycurrentTotal HTTP bytes sent to clients
1.3.6.1.4.1.789.1.8.3.6.19ScalarncHttpBytesFromClientsread-onlycurrentTotal HTTP bytes received from clients
1.3.6.1.4.1.789.1.8.3.6.20ScalarncHttpBytesToServersread-onlycurrentTotal HTTP bytes sent to servers
1.3.6.1.4.1.789.1.8.3.6.21ScalarncHttpBytesFromServersread-onlycurrentTotal HTTP bytes received from servers
1.3.6.1.4.1.789.1.8.3.6.22ScalarncHttpHighTotalRespTimesread-onlycurrentTotal fetch time in milliseconds for HTTP requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.8.3.6.23ScalarncHttpLowTotalRespTimesread-onlycurrentTotal fetch time in milliseconds for HTTP requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.8.3.6.24ScalarncHttpHighTotalHitRespTimesread-onlycurrentTotal fetch time in milliseconds for HTTP HIT requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.8.3.6.25ScalarncHttpLowTotalHitRespTimesread-onlycurrentTotal fetch time in milliseconds for HTTP HIT requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.8.3.6.26ScalarncHttpHighTotalMissRespTimesread-onlycurrentTotal fetch time in milliseconds for HTTP MISS requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.8.3.6.27ScalarncHttpLowTotalMissRespTimesread-onlycurrentTotal fetch time in milliseconds for HTTP MISS requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.8.3.6.28ScalarncHttpReqRateread-onlycurrentRequest Rate for HTTP requests
1.3.6.1.4.1.789.1.8.3.6.29ScalarncHttpObjHitRateLast1Minread-onlycurrentHTTP object hit rate in the last 1 minute.
1.3.6.1.4.1.789.1.8.3.6.30ScalarncHttpObjHitRateLast5Minread-onlycurrentHTTP object hit rate in the last 5 minutes.
1.3.6.1.4.1.789.1.8.3.6.31ScalarncHttpByteHitRateLast1Minread-onlycurrentHTTP byte hit rate in the last 1 minute.
1.3.6.1.4.1.789.1.8.3.6.32ScalarncHttpByteHitRateLast5Minread-onlycurrentHTTP byte hit rate in the last 5 minutes.
1.3.6.1.4.1.789.1.8.3.6.33ScalarncHttpBWSavingsLast1Minread-onlycurrentBandwidth savings for HTTP requests in the last 1 minute
1.3.6.1.4.1.789.1.8.3.6.34ScalarncHttpBWSavingsLast5Minread-onlycurrentBandwidth savings for HTTP requests in the last 5 minutes
1.3.6.1.4.1.789.1.8.3.6.35ScalarncHttpActiveServConnsread-onlycurrentNumber of currently active TCP/IP connections to HTTP servers
1.3.6.1.4.1.789.1.8.3.6.36ScalarncHttpActiveCliConnsread-onlycurrentNumber of currently active TCP/IP connections to HTTP clients
1.3.6.1.4.1.789.1.8.3.6.37TablencHttpAccelTablenot-accessiblecurrentNumber of kilobytes sent to and received from the client side per acceleration rule
1.3.6.1.4.1.789.1.8.3.6.37.1RowncHttpAccelEntrynot-accessiblecurrentEach entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
1.3.6.1.4.1.789.1.8.3.6.37.1.1ColumnncHttpAccelIndexread-onlycurrentA unique value for each entry in the http acceleration stats table
1.3.6.1.4.1.789.1.8.3.6.37.1.2ColumnncHttpAccelKbytesFromClientread-onlycurrentThe total number of kilobytes received from the client for this acceleration rule
1.3.6.1.4.1.789.1.8.3.6.37.1.3ColumnncHttpAccelKbytesToClientread-onlycurrentThe total number of kilobytes sent to the client for this acceleration rule
1.3.6.1.4.1.789.1.8.3.6.37.1.4ColumnncHttpAccelHitsread-onlycurrentThe number of times this acceleration rule has been hit
1.3.6.1.4.1.789.1.8.3.6.38TablencHttpsAccelTablenot-accessiblecurrentNumber of kilobytes sent to and received from the client side per acceleration rule
1.3.6.1.4.1.789.1.8.3.6.38.1RowncHttpsAccelEntrynot-accessiblecurrentEach entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
1.3.6.1.4.1.789.1.8.3.6.38.1.1ColumnncHttpsAccelIndexread-onlycurrentA unique value for each entry in the http acceleration stats table
1.3.6.1.4.1.789.1.8.3.6.38.1.2ColumnncHttpsAccelKbytesFromClientread-onlycurrentThe total number of kilobytes received from the client for this acceleration rule
1.3.6.1.4.1.789.1.8.3.6.38.1.3ColumnncHttpsAccelKbytesToClientread-onlycurrentThe total number of kilobytes sent to the client for this acceleration rule
1.3.6.1.4.1.789.1.8.3.6.38.1.4ColumnncHttpsAccelHitsread-onlycurrentThe number of times this acceleration rule has been hit
1.3.6.1.4.1.789.1.8.3.7NodencNntp
1.3.6.1.4.1.789.1.8.3.7.1ScalarncNntpTotalRequestsread-onlycurrentNNTP total requests so far
1.3.6.1.4.1.789.1.8.3.7.2ScalarncNntpCacheableRequestsread-onlycurrentNNTP requests that were cacheable
1.3.6.1.4.1.789.1.8.3.7.3ScalarncNntpProxyRequestsread-onlycurrentNNTP requests that were non-cacheable
1.3.6.1.4.1.789.1.8.3.7.4ScalarncNntpServConnsread-onlycurrentNumber of currently open TCP/IP connections to NNTP servers (active and idle)
1.3.6.1.4.1.789.1.8.3.7.5ScalarncNntpCliConnsread-onlycurrentNumber of currently open TCP/IP connections to NNTP clients (active and idle)
1.3.6.1.4.1.789.1.8.3.7.6ScalarncNntpBWSavingsread-onlycurrentBandwidth savings for NNTP requests
1.3.6.1.4.1.789.1.8.3.7.7ScalarncNntpRespTimePerByteread-onlycurrentResponse time per byte for NNTP requests
1.3.6.1.4.1.789.1.8.3.7.8ScalarncNntpBytesToClientsread-onlycurrentTotal NNTP bytes sent to clients
1.3.6.1.4.1.789.1.8.3.7.9ScalarncNntpBytesFromClientsread-onlycurrentTotal NNTP bytes received from clients
1.3.6.1.4.1.789.1.8.3.7.10ScalarncNntpBytesToServersread-onlycurrentTotal NNTP bytes sent to servers
1.3.6.1.4.1.789.1.8.3.7.11ScalarncNntpBytesFromServersread-onlycurrentTotal NNTP bytes received from servers
1.3.6.1.4.1.789.1.8.3.7.12ScalarncNntpObjHitrateread-onlycurrentObject Hitrate of NNTP requests
1.3.6.1.4.1.789.1.8.3.7.13ScalarncNntpActiveServConnsread-onlycurrentNumber of currently active TCP/IP connections to NNTP servers
1.3.6.1.4.1.789.1.8.3.7.14ScalarncNntpActiveCliConnsread-onlycurrentNumber of currently active TCP/IP connections to NNTP clients
1.3.6.1.4.1.789.1.8.3.8NodencFtp
1.3.6.1.4.1.789.1.8.3.8.1ScalarncFtpTotalRequestsread-onlycurrentFTP total requests so far
1.3.6.1.4.1.789.1.8.3.8.2ScalarncFtpHitRequestsread-onlycurrentFTP requests that resulted in hits so far
1.3.6.1.4.1.789.1.8.3.8.3ScalarncFtpMissRequestsread-onlycurrentFTP requests that resulted in misses so far
1.3.6.1.4.1.789.1.8.3.8.4ScalarncFtpServConnsread-onlycurrentNumber of currently open TCP/IP connections to FTP servers (active and idle)
1.3.6.1.4.1.789.1.8.3.8.5ScalarncFtpCliConnsread-onlycurrentNumber of currently open TCP/IP connections to FTP clients (active and idle)
1.3.6.1.4.1.789.1.8.3.8.6ScalarncFtpBWSavingsread-onlycurrentBandwidth savings for FTP requests
1.3.6.1.4.1.789.1.8.3.8.7ScalarncFtpRespTimePerByteread-onlycurrentResponse time per byte for FTP requests
1.3.6.1.4.1.789.1.8.3.8.8ScalarncFtpBytesToClientsread-onlycurrentTotal FTP bytes sent to clients
1.3.6.1.4.1.789.1.8.3.8.9ScalarncFtpBytesFromClientsread-onlycurrentTotal FTP bytes received from clients
1.3.6.1.4.1.789.1.8.3.8.10ScalarncFtpBytesToServersread-onlycurrentTotal FTP bytes sent to servers
1.3.6.1.4.1.789.1.8.3.8.11ScalarncFtpBytesFromServersread-onlycurrentTotal FTP bytes received from servers
1.3.6.1.4.1.789.1.8.3.8.12ScalarncFtpObjHitrateread-onlycurrentObject Hitrate of FTP requests
1.3.6.1.4.1.789.1.8.3.8.13ScalarncFtpActiveServConnsread-onlycurrentNumber of currently active TCP/IP connections to FTP servers
1.3.6.1.4.1.789.1.8.3.8.14ScalarncFtpActiveCliConnsread-onlycurrentNumber of currently active TCP/IP connections to FTP clients
1.3.6.1.4.1.789.1.8.3.9NodencStreaming
1.3.6.1.4.1.789.1.8.3.9.1ScalarncStreamingServConnsread-onlycurrentNumber of currently open TCP/IP connections to streaming servers (active and idle)
1.3.6.1.4.1.789.1.8.3.9.2ScalarncStreamingCliConnsread-onlycurrentNumber of currently open TCP/IP connections to streaming clients (active and idle)
1.3.6.1.4.1.789.1.8.3.9.3ScalarncStreamingBWSavingsread-onlycurrentBandwidth savings for all streaming requests
1.3.6.1.4.1.789.1.8.3.9.4ScalarncStreamingRespTimePerByteread-onlycurrentResponse time per byte for all streaming requests
1.3.6.1.4.1.789.1.8.3.9.5ScalarncStreamingHitRequestsread-onlycurrentSTREAMING requests that resulted in hits so far
1.3.6.1.4.1.789.1.8.3.9.6ScalarncStreamingMissRequestsread-onlycurrentSTREAMING requests that resulted in misses so far
1.3.6.1.4.1.789.1.8.3.9.7ScalarncStreamingTotalRequestsread-onlycurrentSTREAMING total requests so far
1.3.6.1.4.1.789.1.8.3.9.8ScalarncStreamingLiveBytesToClientsread-onlycurrentTotal Streaming Live bytes sent to clients
1.3.6.1.4.1.789.1.8.3.9.9ScalarncStreamingLiveBytesFromClientsread-onlycurrentTotal Streaming Live bytes received from clients
1.3.6.1.4.1.789.1.8.3.9.10ScalarncStreamingLiveBytesToServersread-onlycurrentTotal Streaming Live bytes sent to servers
1.3.6.1.4.1.789.1.8.3.9.11ScalarncStreamingLiveBytesFromServersread-onlycurrentTotal Streaming Live bytes received from servers
1.3.6.1.4.1.789.1.8.3.9.12ScalarncStreamingProxyBytesToClientsread-onlycurrentTotal Streaming Proxy bytes sent to clients
1.3.6.1.4.1.789.1.8.3.9.13ScalarncStreamingProxyBytesFromClientsread-onlycurrentTotal Streaming Proxy bytes received from clients
1.3.6.1.4.1.789.1.8.3.9.14ScalarncStreamingProxyBytesToServersread-onlycurrentTotal Streaming Proxy bytes sent to servers
1.3.6.1.4.1.789.1.8.3.9.15ScalarncStreamingProxyBytesFromServersread-onlycurrentTotal Streaming Proxy bytes received from servers
1.3.6.1.4.1.789.1.8.3.9.16ScalarncStreamingOBTClientsread-onlycurrentTotal Streaming Ondemand bytes sent to clients
1.3.6.1.4.1.789.1.8.3.9.17ScalarncStreamingOBFClientsread-onlycurrentTotal Streaming Ondemand bytes received from clients
1.3.6.1.4.1.789.1.8.3.9.18ScalarncStreamingOBTServersread-onlycurrentTotal Streaming Ondemand bytes sent to servers
1.3.6.1.4.1.789.1.8.3.9.19ScalarncStreamingOBFServersread-onlycurrentTotal Streaming Ondemand bytes received from servers
1.3.6.1.4.1.789.1.8.3.9.20ScalarncStreamingObjHitrateread-onlycurrentObject Hitrate of Streaming requests
1.3.6.1.4.1.789.1.8.3.9.21ScalarncStreamingRealBytesToClientsread-onlycurrentTotal Streaming Real bytes sent to clients
1.3.6.1.4.1.789.1.8.3.9.22ScalarncStreamingRealBytesFromClientsread-onlycurrentTotal Streaming Real bytes received from clients
1.3.6.1.4.1.789.1.8.3.9.23ScalarncStreamingRealBytesToServersread-onlycurrentTotal Streaming Real bytes sent to servers
1.3.6.1.4.1.789.1.8.3.9.24ScalarncStreamingRealBytesFromServersread-onlycurrentTotal Streaming Real bytes received from servers
1.3.6.1.4.1.789.1.8.3.9.25ScalarncStreamingMmsBytesToClientsread-onlycurrentTotal Streaming Mms bytes sent to clients
1.3.6.1.4.1.789.1.8.3.9.26ScalarncStreamingMmsBytesFromClientsread-onlycurrentTotal Streaming Mms bytes received from clients
1.3.6.1.4.1.789.1.8.3.9.27ScalarncStreamingMmsBytesToServersread-onlycurrentTotal Streaming Mms bytes sent to servers
1.3.6.1.4.1.789.1.8.3.9.28ScalarncStreamingMmsBytesFromServersread-onlycurrentTotal Streaming Mms bytes received from servers
1.3.6.1.4.1.789.1.8.3.9.29ScalarncStreamingQTBTClientsread-onlycurrentTotal Streaming QuickTime bytes sent to clients
1.3.6.1.4.1.789.1.8.3.9.30ScalarncStreamingQTBFClientsread-onlycurrentTotal Streaming QuickTime bytes received from clients
1.3.6.1.4.1.789.1.8.3.9.31ScalarncStreamingQTBTServersread-onlycurrentTotal Streaming QuickTime bytes sent to servers
1.3.6.1.4.1.789.1.8.3.9.32ScalarncStreamingQTBFServersread-onlycurrentTotal Streaming QuickTime bytes received from servers
1.3.6.1.4.1.789.1.8.3.9.33ScalarncStreamingLiveBWSavingsread-onlycurrentBandwidth savings for all Live streaming requests
1.3.6.1.4.1.789.1.8.3.9.34ScalarncStreamingOndemandBWSavingsread-onlycurrentBandwidth savings for all VOD streaming requests
1.3.6.1.4.1.789.1.8.3.9.35ScalarncStreamingRealBWSavingsread-onlycurrentBandwidth savings for all Real streaming requests
1.3.6.1.4.1.789.1.8.3.9.36ScalarncStreamingMmsBWSavingsread-onlycurrentBandwidth savings for all MMS streaming requests
1.3.6.1.4.1.789.1.8.3.9.37ScalarncStreamingQuickTimeBWSavingsread-onlycurrentBandwidth savings for all QuickTime streaming requests
1.3.6.1.4.1.789.1.8.3.9.38ScalarncStreamingActiveServConnsread-onlycurrentNumber of currently active TCP/IP connections to streaming servers
1.3.6.1.4.1.789.1.8.3.9.39ScalarncStreamingActiveCliConnsread-onlycurrentNumber of currently active TCP/IP connections to streaming clients
1.3.6.1.4.1.789.1.8.3.9.40ScalarncStreamingRtspWMBytesToClientsread-onlycurrentTotal Streaming Windows Media RTSP bytes sent to clients
1.3.6.1.4.1.789.1.8.3.9.41ScalarncStreamingRtspWMBFClientsread-onlycurrentTotal Streaming Windows Media RTSP bytes received from clients
1.3.6.1.4.1.789.1.8.3.9.42ScalarncStreamingRtspWMBytesToServersread-onlycurrentTotal Streaming Windows Media RTSP bytes sent to servers
1.3.6.1.4.1.789.1.8.3.9.43ScalarncStreamingRtspWMBFServersread-onlycurrentTotal Streaming Windows Media RTSP bytes received from servers
1.3.6.1.4.1.789.1.8.3.9.44ScalarncStreamingRtspWMBWSavingsread-onlycurrentBandwidth savings for all Windows Media RTSP streaming requests
1.3.6.1.4.1.789.1.8.3.9.45TablencStreamingAccelTablenot-accessiblecurrentNumber of kilobytes sent to and received from the client side per acceleration rule
1.3.6.1.4.1.789.1.8.3.9.45.1RowncStreamingAccelEntrynot-accessiblecurrentEach entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
1.3.6.1.4.1.789.1.8.3.9.45.1.1ColumnncStreamingAccelIndexread-onlycurrentA unique value for each entry in the streaming acceleration stats table
1.3.6.1.4.1.789.1.8.3.9.45.1.2ColumnncStreamingAccelKbytesFromClientread-onlycurrentThe total number of kilobytes received from the client for this acceleration rule
1.3.6.1.4.1.789.1.8.3.9.45.1.3ColumnncStreamingAccelKbytesToClientread-onlycurrentThe total number of kilobytes sent to the client for this acceleration rule
1.3.6.1.4.1.789.1.8.3.9.45.1.4ColumnncStreamingAccelHitsread-onlycurrentThe number of times this acceleration rule has been hit
1.3.6.1.4.1.789.1.8.3.9.46ScalarncStreamingClientsDelayedSWread-onlycurrentNumber of clients delayed because of a Bandwidth Limit
1.3.6.1.4.1.789.1.8.3.10ScalarncTotalBWSavingsread-onlycurrentTotal Bandwidth savings for HTTP, FTP, NNTP, and Streaming protocols
1.3.6.1.4.1.789.1.8.3.11NodencDns
1.3.6.1.4.1.789.1.8.3.11.1ScalarncDnsRequestsReceivedread-onlycurrentTotal DNS requests received from clients
1.3.6.1.4.1.789.1.8.3.11.2ScalarncDnsCacheHitsread-onlycurrentHits on the DNS cache. This includes hits for DNS lookups generated by NetCache internally
1.3.6.1.4.1.789.1.8.3.11.3ScalarncDnsCacheMissesread-onlycurrentMisses on the DNS cache. This includes misses for DNS lookups generated by NetCache internally
1.3.6.1.4.1.789.1.8.3.11.4ScalarncDnsSuccessfulForwardLookupsread-onlycurrentForward DNS lookups that are successful
1.3.6.1.4.1.789.1.8.3.11.5ScalarncDnsFailedForwardLookupsread-onlycurrentForward DNS lookups that failed
1.3.6.1.4.1.789.1.8.3.11.6ScalarncDnsPendingForwardLookupsread-onlycurrentForward DNS lookups that are in progress
1.3.6.1.4.1.789.1.8.3.11.7ScalarncDnsSuccessfulReverseLookupsread-onlycurrentReverse DNS lookups that are successful
1.3.6.1.4.1.789.1.8.3.11.8ScalarncDnsFailedReverseLookupsread-onlycurrentReverse DNS lookups that failed
1.3.6.1.4.1.789.1.8.3.11.9ScalarncDnsPendingReverseLookupsread-onlycurrentReverse DNS lookups that are in progress
1.3.6.1.4.1.789.1.8.3.11.10NodencDnsIres
1.3.6.1.4.1.789.1.8.3.11.10.1ScalarncDnsIresIsEnabledread-onlycurrentHas Full Service Resolver been enabled
1.3.6.1.4.1.789.1.8.3.11.10.2ScalarncDnsIresIsInitialisedread-onlycurrentHas Full Service Resolver initialized
1.3.6.1.4.1.789.1.8.3.11.10.3ScalarncDnsIresForwardLookupsread-onlycurrentFull Service Resolver's Forward Lookups
1.3.6.1.4.1.789.1.8.3.11.10.4ScalarncDnsIresPendingForwardLookupsread-onlycurrentFull Service Resolver's Pending Forward Lookups
1.3.6.1.4.1.789.1.8.3.11.10.5ScalarncDnsIresReverseLookupsread-onlycurrentFull Service Resolver's Reverse Lookups
1.3.6.1.4.1.789.1.8.3.11.10.6ScalarncDnsIresPendingReverseLookupsread-onlycurrentFull Service Resolver's Pending Reverse Lookups
1.3.6.1.4.1.789.1.8.3.12NodencAuth
1.3.6.1.4.1.789.1.8.3.12.1NodencNtlm
1.3.6.1.4.1.789.1.8.3.12.1.1ScalarncNtlmPossibleProblemread-onlycurrentWhether a possible ntlm problem is detected in the appliance's domain environment.
1.3.6.1.4.1.789.1.8.3.13NodencRM
1.3.6.1.4.1.789.1.8.3.13.1NodencRMMem
1.3.6.1.4.1.789.1.8.3.13.1.1ScalarncRMMemTotalread-onlycurrentTotal memory in kilobytes available for allocations after boot. It does not imply the total system memory.
1.3.6.1.4.1.789.1.8.3.13.1.2ScalarncRMMemFreeread-onlycurrentCurrent free memory in kilobytes available for allocations.
1.3.6.1.4.1.789.1.9Nodesnapmirror
1.3.6.1.4.1.789.1.9.1ScalarsnapmirrorOnread-onlycurrentIndicates whether snapmirror has been turned on or not.
1.3.6.1.4.1.789.1.9.2ScalarsnapmirrorActiveRestoreCountread-onlycurrentNumber of active SnapMirror restores.
1.3.6.1.4.1.789.1.9.3ScalarsnapmirrorScheduledRestoreCountread-onlycurrentNumber of scheduled SnapMirror restores.
1.3.6.1.4.1.789.1.9.4ScalarsnapmirrorBackupNumberread-onlycurrentNumber of active SnapMirror backups.
1.3.6.1.4.1.789.1.9.5ScalarsnapmirrorBackupSuccessesread-onlycurrentNumber of SnapMirror backups which completed. Reset on reboot.
1.3.6.1.4.1.789.1.9.6ScalarsnapmirrorRestoreSuccessesread-onlycurrentNumber of SnapMirror restores which completed. Reset on reboot.
1.3.6.1.4.1.789.1.9.7ScalarsnapmirrorBackupAbortsread-onlycurrentNumber of SnapMirror backup transfers which have aborted. Reset on reboot.
1.3.6.1.4.1.789.1.9.8ScalarsnapmirrorRestoreRestartAbortsread-onlycurrentNumber of SnapMirror restore temporary aborts. Reset on reboot.
1.3.6.1.4.1.789.1.9.9ScalarsnapmirrorRestoreWaitAbortsread-onlycurrentNumber of SnapMirror restore permanent aborts. Reset on reboot.
1.3.6.1.4.1.789.1.9.10ScalarsnapmirrorWrittenBytesread-onlycurrentNumber of Megabytes written by SnapMirror. Reset on reboot.
1.3.6.1.4.1.789.1.9.11ScalarsnapmirrorReadBytesread-onlycurrentNumber of Megabytes read by SnapMirror. Reset on reboot.
1.3.6.1.4.1.789.1.9.12ScalarsnapmirrorActiveDstNumberread-onlycurrentNumber of active SnapMirror destination.
1.3.6.1.4.1.789.1.9.13ScalarsnapmirrorActiveSrcNumberread-onlycurrentNumber of active SnapMirror Source.
1.3.6.1.4.1.789.1.9.14ScalarsnapmirrorFilerTotalDstSuccessesread-onlycurrentTotal number of successful snapmirror transfers to the destination. Persistent across reboot.
1.3.6.1.4.1.789.1.9.15ScalarsnapmirrorFilerTotalSrcSuccessesread-onlycurrentTotal number of successful snapmirror transfers from the source. Persistent across reboot.
1.3.6.1.4.1.789.1.9.16ScalarsnapmirrorFilerTotalSrcFailuresread-onlycurrentTotal number of failed SnapMirror transfers on the source. Persistent across reboot.
1.3.6.1.4.1.789.1.9.17ScalarsnapmirrorFilerTotalDstFailuresread-onlycurrentTotal number of failed SnapMirror transfers on the destination. Persistent across reboot.
1.3.6.1.4.1.789.1.9.18ScalarsnapmirrorFilerTotalDstDefermentsread-onlycurrentTotal number of deferred snapmirror transfer on the destination. Persistent across reboot.
1.3.6.1.4.1.789.1.9.19ScalarsnapmirrorIsLicensedread-onlycurrentWhether the snapmirror is licensed on the filer.
1.3.6.1.4.1.789.1.9.20TablesnapmirrorStatusTablenot-accessiblecurrentprovide a list of snapmirror status.
1.3.6.1.4.1.789.1.9.20.1RowsnapmirrorStatusEntrynot-accessiblecurrentProvide a report of current status of snapmirror.
1.3.6.1.4.1.789.1.9.20.1.1ColumnsnapmirrorIndexread-onlycurrentIndex into the snapmirror status table.
1.3.6.1.4.1.789.1.9.20.1.2ColumnsnapmirrorSrcread-onlycurrentSource of the snapmirror. <filer>:<vol> or <filer>:/vol/<qtree_name>
1.3.6.1.4.1.789.1.9.20.1.3ColumnsnapmirrorDstread-onlycurrentDestination of the snapmirror. <filer>:<vol> or <filer>:/vol/<qtree_name>
1.3.6.1.4.1.789.1.9.20.1.4ColumnsnapmirrorStatusread-onlycurrentCurrent transfer status of the snapmirror.
1.3.6.1.4.1.789.1.9.20.1.5ColumnsnapmirrorStateread-onlycurrentCurrent state of the snapmirror.
1.3.6.1.4.1.789.1.9.20.1.6ColumnsnapmirrorLagread-onlycurrentHow far behind from the source the destination is.
1.3.6.1.4.1.789.1.9.20.1.7ColumnsnapmirrorTotalSuccessesread-onlycurrentTotal number of successful transfer since the snapmirror is initialized. Persistent across reboot.
1.3.6.1.4.1.789.1.9.20.1.8ColumnsnapmirrorTotalRestartSuccessesread-onlycurrentTotal number of successful restarted transfer since the snapmirror is initialized. Persistent across reboot.
1.3.6.1.4.1.789.1.9.20.1.9ColumnsnapmirrorTotalFailuresread-onlycurrentTotal number of failed or aborted transfer since the snapmirror is initialized. Persistent across reboot.
1.3.6.1.4.1.789.1.9.20.1.10ColumnsnapmirrorTotalDefermentsread-onlycurrentTotal number of deferment since the snapmirror is initialized. Persistent across reboot.
1.3.6.1.4.1.789.1.9.20.1.11ColumnsnapmirrorTotalTransMBsread-onlycurrentTotal transfer size in MB for the snapmirror. Reset on reboot.
1.3.6.1.4.1.789.1.9.20.1.12ColumnsnapmirrorTotalTransTimeSecondsread-onlycurrentTotal number of seconds spent in successful transfer for the snapmirror. Reset on reboot.
1.3.6.1.4.1.789.1.9.20.1.13ColumnsnapmirrorThrottleValueread-onlycurrentCurrent throttle value for the snapmirror.
1.3.6.1.4.1.789.1.9.20.1.14ColumnsnapmirrorMirrorTimestampread-onlycurrentTimestamp of the last snapshot successfully transferred from the source to the destination.
1.3.6.1.4.1.789.1.9.20.1.15ColumnsnapmirrorBaseSnapshotread-onlycurrentThe name of the current base snapshot for the snapmirror.
1.3.6.1.4.1.789.1.9.20.1.16ColumnsnapmirrorLastTransTyperead-onlycurrentThe type of the previous successful transfer.
1.3.6.1.4.1.789.1.9.20.1.17ColumnsnapmirrorLastTransMBsread-onlycurrentLast successful transfer size in MB for the snapmirror.
1.3.6.1.4.1.789.1.9.20.1.18ColumnsnapmirrorLastTransTimeSecondsread-onlycurrentDuration of last successful transfer in seconds for the snapmirror.
1.3.6.1.4.1.789.1.9.20.1.19ColumnsnapmirrorScheduleread-onlycurrentUpdate schedule for the snapmirror in conf file format.
1.3.6.1.4.1.789.1.9.20.1.20ColumnsnapmirrorScheduleDescread-onlycurrentDescription of the update schedule for the snapmirror.
1.3.6.1.4.1.789.1.9.20.1.21ColumnsnapmirrorArgumentsread-onlycurrentArguments for the snapmirror in conf file format.
1.3.6.1.4.1.789.1.9.20.1.22ColumnsnapmirrorSyncToAsyncread-onlycurrentThe number of times changing from sync mode to async mode since the snapmirror is initialized. Persistent across reboot.
1.3.6.1.4.1.789.1.9.21TablesnapmirrorConnTablenot-accessiblecurrentProvide a list of snapmirror connection definitions.
1.3.6.1.4.1.789.1.9.21.1RowsnapmirrorConnEntrynot-accessiblecurrentProvide a report of a defined multipath connection.
1.3.6.1.4.1.789.1.9.21.1.1ColumnsnapmirrorConnIndexread-onlycurrentIndex into the snapmirror multipath connection table.
1.3.6.1.4.1.789.1.9.21.1.2ColumnsnapmirrorConnNameread-onlycurrentThe name of the snapmirror multipath connection.
1.3.6.1.4.1.789.1.9.21.1.3ColumnsnapmirrorConnTyperead-onlycurrentThe type of the snapmirror multipath connection.
1.3.6.1.4.1.789.1.9.21.1.4ColumnsnapmirrorConnSrc1read-onlycurrentThe name of the source for the first path.
1.3.6.1.4.1.789.1.9.21.1.5ColumnsnapmirrorConnDst1read-onlycurrentThe name of the destination for the first path.
1.3.6.1.4.1.789.1.9.21.1.6ColumnsnapmirrorConnSrc2read-onlycurrentThe name of the source for the second path.
1.3.6.1.4.1.789.1.9.21.1.7ColumnsnapmirrorConnDst2read-onlycurrentThe name of the destination for the second path.
1.3.6.1.4.1.789.1.10Nodendmp
1.3.6.1.4.1.789.1.10.1ScalarndmpOnread-onlyobsoleteIndicates whether ndmpd has been turned on or not.
1.3.6.1.4.1.789.1.10.2ScalarndmpSessionOpenedread-onlyobsoleteTotal number of ndmpd sessions currently opened. Sessions may be running backups, restores or neither.
1.3.6.1.4.1.789.1.10.3ScalarndmpBackupActiveread-onlyobsoleteNumber of ndmpd backups currently active.
1.3.6.1.4.1.789.1.10.4ScalarndmpRestoreActiveread-onlyobsoleteNumber of ndmpd restores currently active.
1.3.6.1.4.1.789.1.10.5ScalarndmpTapeActiveread-onlyobsoleteNumber of tape drives currently active.
1.3.6.1.4.1.789.1.10.6ScalarndmpBackupSuccessesread-onlyobsoleteNumber of ndmpd backups that succeeded.
1.3.6.1.4.1.789.1.10.7ScalarndmpRestoreSuccessesread-onlyobsoleteNumber of ndmpd restores that succeeded.
1.3.6.1.4.1.789.1.10.8ScalarndmpBackupFailuresread-onlyobsoleteNumber of ndmpd backups that failed.
1.3.6.1.4.1.789.1.10.9ScalarndmpRestoreFailuresread-onlyobsoleteNumber of ndmpd restores that failed.
1.3.6.1.4.1.789.1.10.10ScalarndmpBackupFailureReasonread-onlyobsoleteWhen the ndmpBackupFailures value is non-zero, this string describes the reason for the most recent backup failure.
1.3.6.1.4.1.789.1.10.11ScalarndmpRestoreFailureReasonread-onlyobsoleteWhen the ndmpRestoreFailures value is non-zero, this string describes the reason for the most recent restore failure.
1.3.6.1.4.1.789.1.11Nodefabric
1.3.6.1.4.1.789.1.11.1ScalarfabricInstancesread-onlycurrentThe number of distinct fabrics present.
1.3.6.1.4.1.789.1.11.2TablefabricTablenot-accessiblecurrentProvide a list of fabrics.
1.3.6.1.4.1.789.1.11.2.1RowfabricEntrynot-accessiblecurrentProvide a report of current configuration and status of fabrics.
1.3.6.1.4.1.789.1.11.2.1.1ColumnfabricIndexread-onlycurrentA number that identifies this fabric entry.
1.3.6.1.4.1.789.1.11.2.1.2ColumnfabricStatusread-onlycurrentThis indicates the overall status of the SAN fabric(s).
1.3.6.1.4.1.789.1.11.2.1.3ColumnfabricStatusMessageread-onlycurrentA string describing the fabric status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
1.3.6.1.4.1.789.1.11.2.1.4ColumnfabricNameread-onlycurrentThis is the WWN of the fabric.
1.3.6.1.4.1.789.1.11.2.1.5ColumnfabricOwnerread-onlycurrentThis indicates who owns the management of the fabric.
1.3.6.1.4.1.789.1.11.3TableswitchTablenot-accessiblecurrentProvide a list of switches and hubs connected to the fabric.
1.3.6.1.4.1.789.1.11.3.1RowswitchEntrynot-accessiblecurrentProvide a report of current configuration and status of fabric interconnect elements. This include switches and hubs.
1.3.6.1.4.1.789.1.11.3.1.1ColumnswitchIndexread-onlycurrentA number that identifies this switch entry.
1.3.6.1.4.1.789.1.11.3.1.2ColumnswitchNameread-onlycurrentThis is the WWN of the switch.
1.3.6.1.4.1.789.1.11.3.1.3ColumnswitchSymbolicNameread-onlycurrentThis is the symbolic name of the switch.
1.3.6.1.4.1.789.1.11.3.1.4ColumnswitchTyperead-onlycurrentThe type of the switch.
1.3.6.1.4.1.789.1.11.3.1.5ColumnswitchDomainread-onlycurrentThe domain identifier of the switch.
1.3.6.1.4.1.789.1.11.3.1.6ColumnswitchManagementIdread-onlycurrentThe in-band management identifier of the switch.
1.3.6.1.4.1.789.1.11.3.1.7ColumnswitchStatusread-onlycurrentThe current status of the switch.
1.3.6.1.4.1.789.1.11.3.1.8ColumnswitchStatusMessageread-onlycurrentA string describing the switch status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
1.3.6.1.4.1.789.1.11.3.1.9ColumnswitchLinkSpeedread-onlycurrentThe link speed of the switch. The value is an integer whose units are Gbits (for example, a value of 2 represents a link speed of 2 Gbit).
1.3.6.1.4.1.789.1.11.3.1.10ColumnswitchHighPacketsProcessedread-onlydeprecatedNumber of Packets successfully processed since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned int…
1.3.6.1.4.1.789.1.11.3.1.11ColumnswitchLowPacketsProcessedread-onlydeprecatedNumber of Packets successfully processed since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned in…
1.3.6.1.4.1.789.1.11.3.1.12ColumnswitchHighPacketsRejectedread-onlydeprecatedNumber of Packets rejected since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned integer. This obj…
1.3.6.1.4.1.789.1.11.3.1.13ColumnswitchLowPacketsRejectedread-onlydeprecatedNumber of Packets rejected since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned integer. This ob…
1.3.6.1.4.1.789.1.11.3.1.14ColumnswitchFabricIndexread-onlycurrentThe index of the fabric on which this switch resides. The value ranges from 1 to the value of fabricInstances.
1.3.6.1.4.1.789.1.11.3.1.15Columnswitch64PacketsProcessedread-onlycurrentNumber of Packets successfully processed since the last reboot/reset of the switch. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.11.3.1.16Columnswitch64PacketsRejectedread-onlycurrentNumber of Packets rejected since the last reboot/reset of the switch. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.11.4TableportTablenot-accessiblecurrentProvide a list of ports connected to the fabric.
1.3.6.1.4.1.789.1.11.4.1RowportEntrynot-accessiblecurrentProvide a report of current configuration and status of ports in the fabric.
1.3.6.1.4.1.789.1.11.4.1.1ColumnportIndexread-onlycurrentA number that identifies this port entry.
1.3.6.1.4.1.789.1.11.4.1.2ColumnportNameread-onlycurrentThis is the WWN of the port.
1.3.6.1.4.1.789.1.11.4.1.3ColumnportSwitchIndexread-onlycurrentThe index of the switch on which this port resides. The value ranges from 1 to the number of of switches.
1.3.6.1.4.1.789.1.11.4.1.4ColumnportSwitchNameread-onlycurrentThis is the WWN of the switch to which the port is attached.
1.3.6.1.4.1.789.1.11.4.1.5ColumnportNumberread-onlycurrentThe port number on the switch.
1.3.6.1.4.1.789.1.11.4.1.6ColumnportTyperead-onlycurrentThe type of the port.
1.3.6.1.4.1.789.1.11.4.1.7ColumnportStateread-onlycurrentThe current state of the port.
1.3.6.1.4.1.789.1.11.4.1.8ColumnportFabricIndexread-onlycurrentThe index of the fabric on which this port resides. The value ranges from 1 to the value of fabricInstances.
1.3.6.1.4.1.789.1.12Nodedafs
1.3.6.1.4.1.789.1.12.1NodedafsOptions
1.3.6.1.4.1.789.1.12.1.1ScalardafsIsLicensedread-onlyobsoleteWhether the dafs protocol is licensed on the filer. Data ONTAP Specific
1.3.6.1.4.1.789.1.12.1.2ScalardafsMaxRequestsServerread-onlyobsoleteServer wide maximum number of concurrent requests Data ONTAP Specific
1.3.6.1.4.1.789.1.12.1.3ScalardafsMaxRequestsread-onlyobsoleteServer maximum number of concurrent requests per session Data ONTAP Specific
1.3.6.1.4.1.789.1.12.1.4ScalardafsMaxRequestSizeread-onlycurrentServer maximum size of an inline request
1.3.6.1.4.1.789.1.12.1.5ScalardafsMaxResponseSizeread-onlycurrentServer maximum size of an inline response
1.3.6.1.4.1.789.1.12.1.6ScalardafsMaxPendingRequestsServerread-onlyobsoleteServer wide maximum number of requests that can queue waiting for resources Data ONTAP Specific
1.3.6.1.4.1.789.1.12.1.7ScalardafsUseChecksumsread-onlycurrentServer uses checksums
1.3.6.1.4.1.789.1.12.1.8ScalardafsNicNumRequestDemonsread-onlyobsoleteServer default number of request demons per Nic. Data ONTAP Specific
1.3.6.1.4.1.789.1.12.1.9ScalardafsAnonymousAuthenticationread-onlycurrentAllow the server to accept connections with authentication type NONE.
1.3.6.1.4.1.789.1.12.1.10ScalardafsServerEnabledread-onlycurrentCurrent status of the DAFS server. If true, the DAFS server is running.
1.3.6.1.4.1.789.1.12.1.11ScalardafsDefaultUidread-onlycurrentDefault client User ID if anonymously connected.
1.3.6.1.4.1.789.1.12.1.12ScalardafsDefaultGidread-onlycurrentDefault client Group ID if anonymously connected.
1.3.6.1.4.1.789.1.12.1.13ScalardafsMaxDisconnectedSessionsread-onlycurrentMaximum number of disconnected sessions for which the DAFS server will retain response cache data.
1.3.6.1.4.1.789.1.12.1.14ScalardafsMaxIdleSecondsread-onlycurrentMaximum number of seconds server will keep a session open without hearing from the client.
1.3.6.1.4.1.789.1.12.2TabledafsNicTablenot-accessiblecurrentA table containing DAFS NIC specific information.
1.3.6.1.4.1.789.1.12.2.1RowdafsNicEntrynot-accessiblecurrentInformation about a particular current DAFS nic. An object of this type is transient, in that it ceases to exist when (or soon after) the nic is detached.
1.3.6.1.4.1.789.1.12.2.1.1ColumndafsNicIndexread-onlycurrentA unique value for each interface. Its value ranges between 1 and the value of DafsNicNumber. The value for each interface must remain constant at least from o…
1.3.6.1.4.1.789.1.12.2.1.2ColumndafsNicNameread-onlycurrentA textual string containing the logical name under which the nic has been attached.
1.3.6.1.4.1.789.1.12.2.1.3ColumndafsNicDeviceread-onlycurrentA textual string containing the physical name of the nic that has been attached.
1.3.6.1.4.1.789.1.12.2.1.4ColumndafsNicStateread-onlycurrentCurrent state of DAFS nic
1.3.6.1.4.1.789.1.12.2.1.5ColumndafsNicListenAddrread-onlycurrentTransport specific address structure giving the DAFS listen address for this NIC.
1.3.6.1.4.1.789.1.12.2.1.6ColumndafsNicNumRqstDemonsread-onlyobsoleteNumber of request demons assigned to this Nic to handle Nic related events. Data ONTAP Specific
1.3.6.1.4.1.789.1.12.2.1.7ColumndafsNicInBytesread-onlycurrentTotal number of bytes, include DMA, received on this interface
1.3.6.1.4.1.789.1.12.2.1.8ColumndafsNicDirectInBytesread-onlycurrentTotal number of bytes read directly from the peer memory through this interface
1.3.6.1.4.1.789.1.12.2.1.9ColumndafsNicOutBytesread-onlycurrentTotal number of bytes, include DMA, sent on this interface
1.3.6.1.4.1.789.1.12.2.1.10ColumndafsNicDirectOutBytesread-onlycurrentTotal number of bytes written directly to the peer memory through this interface
1.3.6.1.4.1.789.1.12.3NodecurDafs
1.3.6.1.4.1.789.1.12.3.1ScalardafsPendingRequestsread-onlyobsoleteServer wide current number of requests that are queued waiting for resources Data ONTAP Specific
1.3.6.1.4.1.789.1.12.3.2ScalardafsCurrentRequestsread-onlyobsoleteServer wide current number of active requests Data ONTAP Specific
1.3.6.1.4.1.789.1.12.4NodetotDafs
1.3.6.1.4.1.789.1.12.4.1ScalardafsCallsread-onlycurrentTotal number of DAFS calls since last reboot
1.3.6.1.4.1.789.1.12.4.2ScalardafsClientAuthsread-onlycurrentTotal number of Client Auth calls since last reboot
1.3.6.1.4.1.789.1.12.4.3ScalardafsClientConnectsread-onlycurrentTotal number of Client Connect calls since last reboot
1.3.6.1.4.1.789.1.12.4.4ScalardafsClientConnectAuthsread-onlycurrentTotal number of Client Connect Auth calls since last reboot
1.3.6.1.4.1.789.1.12.4.5ScalardafsConnectBindsread-onlycurrentTotal number of Connect Bind calls since last reboot
1.3.6.1.4.1.789.1.12.4.6ScalardafsDisconnectsread-onlycurrentTotal number of Disconnect calls since last reboot
1.3.6.1.4.1.789.1.12.4.7ScalardafsRegisterCredsread-onlycurrentTotal number of Register Credential calls since last reboot
1.3.6.1.4.1.789.1.12.4.8ScalardafsReleaseCredsread-onlycurrentTotal number of Release Credential calls since last reboot
1.3.6.1.4.1.789.1.12.4.9ScalardafsSecinfosread-onlycurrentTotal number of Secinfo calls since last reboot
1.3.6.1.4.1.789.1.12.4.10ScalardafsServerAuthsread-onlycurrentTotal number of Server Auth calls since last reboot
1.3.6.1.4.1.789.1.12.4.11ScalardafsCheckResponsesread-onlycurrentTotal number of Check Response calls since last reboot
1.3.6.1.4.1.789.1.12.4.12ScalardafsFetchResponsesread-onlycurrentTotal number of Fetch Response calls since last reboot
1.3.6.1.4.1.789.1.12.4.13ScalardafsDiscardResponsesread-onlycurrentTotal number of Discard Responses calls since last reboot
1.3.6.1.4.1.789.1.12.4.14ScalardafsAccessesread-onlycurrentTotal number of Access calls since last reboot
1.3.6.1.4.1.789.1.12.4.15ScalardafsCacheHintsread-onlycurrentTotal number of Cache Hint calls since last reboot
1.3.6.1.4.1.789.1.12.4.16ScalardafsClosesread-onlycurrentTotal number of Close calls since last reboot
1.3.6.1.4.1.789.1.12.4.17ScalardafsCommitsread-onlycurrentTotal number of Commit calls since last reboot
1.3.6.1.4.1.789.1.12.4.18ScalardafsCreatesread-onlycurrentTotal number of Create calls since last reboot
1.3.6.1.4.1.789.1.12.4.19ScalardafsDelegPurgesread-onlycurrentTotal number of Delegate Purge calls since last reboot
1.3.6.1.4.1.789.1.12.4.20ScalardafsDelegReturnsread-onlycurrentTotal number of Delegate Return calls since last reboot
1.3.6.1.4.1.789.1.12.4.21ScalardafsGetFsattrsread-onlycurrentTotal number of Get Fsattr calls since last reboot
1.3.6.1.4.1.789.1.12.4.22ScalardafsGetRootHandlesread-onlycurrentTotal number of Get Root Handle calls since last reboot
1.3.6.1.4.1.789.1.12.4.23ScalardafsGetattrInlinesread-onlycurrentTotal number of Getattr Inline calls since last reboot
1.3.6.1.4.1.789.1.12.4.24ScalardafsGetattrDirectsread-onlycurrentTotal number of Getattr Direct calls since last reboot
1.3.6.1.4.1.789.1.12.4.25ScalardafsLinksread-onlycurrentTotal number of Link calls since last reboot
1.3.6.1.4.1.789.1.12.4.26ScalardafsLocksread-onlycurrentTotal number of Lock calls since last reboot
1.3.6.1.4.1.789.1.12.4.27ScalardafsLocktsread-onlycurrentTotal number of LockT calls since last reboot
1.3.6.1.4.1.789.1.12.4.28ScalardafsLockusread-onlycurrentTotal number of LockU calls since last reboot
1.3.6.1.4.1.789.1.12.4.29ScalardafsLookUpsread-onlycurrentTotal number of LookUp calls since last reboot
1.3.6.1.4.1.789.1.12.4.30ScalardafsLookUppsread-onlycurrentTotal number of LookUpp calls since last reboot
1.3.6.1.4.1.789.1.12.4.31ScalardafsNullsread-onlycurrentTotal number of Null calls since last reboot
1.3.6.1.4.1.789.1.12.4.32ScalardafsNverifysread-onlycurrentTotal number of Nverify calls since last reboot
1.3.6.1.4.1.789.1.12.4.33ScalardafsOpensread-onlycurrentTotal number of Open calls since last reboot
1.3.6.1.4.1.789.1.12.4.34ScalardafsOpenDowngradesread-onlycurrentTotal number of Open Downgrade calls since last reboot
1.3.6.1.4.1.789.1.12.4.35ScalardafsOpenattrsread-onlycurrentTotal number of Openattr calls since last reboot
1.3.6.1.4.1.789.1.12.4.36ScalardafsReadInlinesread-onlycurrentTotal number of Read Inline calls since last reboot
1.3.6.1.4.1.789.1.12.4.37ScalardafsReadDirectsread-onlycurrentTotal number of Read Direct calls since last reboot
1.3.6.1.4.1.789.1.12.4.38ScalardafsReaddirInlinesread-onlycurrentTotal number of Readdir Inline calls since last reboot
1.3.6.1.4.1.789.1.12.4.39ScalardafsReaddirDirectsread-onlycurrentTotal number of Readdir Direct calls since last reboot
1.3.6.1.4.1.789.1.12.4.40ScalardafsReadlinkInlinesread-onlycurrentTotal number of Readlink Inline calls since last reboot
1.3.6.1.4.1.789.1.12.4.41ScalardafsReadlinkDirectsread-onlycurrentTotal number of Readlink Direct calls since last reboot
1.3.6.1.4.1.789.1.12.4.42ScalardafsRemovesread-onlycurrentTotal number of Remove calls since last reboot
1.3.6.1.4.1.789.1.12.4.43ScalardafsRenamesread-onlycurrentTotal number of Rename calls since last reboot
1.3.6.1.4.1.789.1.12.4.44ScalardafsSetattrInlinesread-onlycurrentTotal number of Setattr Inline calls since last reboot
1.3.6.1.4.1.789.1.12.4.45ScalardafsSetattrDirectsread-onlycurrentTotal number of Setattr Direct calls since last reboot
1.3.6.1.4.1.789.1.12.4.46ScalardafsVerifysread-onlycurrentTotal number of Verify calls since last reboot
1.3.6.1.4.1.789.1.12.4.47ScalardafsBatchSubmitsread-onlycurrentTotal number of Batch Submit calls since last reboot
1.3.6.1.4.1.789.1.12.4.48ScalardafsWriteInlinesread-onlycurrentTotal number of Write Inline calls since last reboot
1.3.6.1.4.1.789.1.12.4.49ScalardafsWriteDirectsread-onlycurrentTotal number of Write Direct calls since last reboot
1.3.6.1.4.1.789.1.12.4.50ScalardafsBcGetattrsread-onlycurrentTotal number of BC Getattr calls since last reboot
1.3.6.1.4.1.789.1.12.4.51ScalardafsBcNullsread-onlycurrentTotal number of BC Null calls since last reboot
1.3.6.1.4.1.789.1.12.4.52ScalardafsBcRecallsread-onlycurrentTotal number of BC Recall calls since last reboot
1.3.6.1.4.1.789.1.12.4.53ScalardafsBcBatchCompletionsread-onlycurrentTotal number of BC Batch Completion calls since last reboot
1.3.6.1.4.1.789.1.12.4.54ScalardafsAppendInlinesread-onlycurrentTotal number of Append Inline calls since last reboot
1.3.6.1.4.1.789.1.12.4.55ScalardafsAppendDirectsread-onlycurrentTotal number of Append Direct calls since last reboot
1.3.6.1.4.1.789.1.12.4.56ScalardafsGetFencingListsread-onlycurrentTotal number of Get Fencing List calls since last reboot
1.3.6.1.4.1.789.1.12.4.57ScalardafsSetFencingListsread-onlycurrentTotal number of Set Fencing List calls since last reboot
1.3.6.1.4.1.789.1.12.4.58ScalardafsHurryUpsread-onlycurrentTotal number of Hurry Up calls since last reboot
1.3.6.1.4.1.789.1.12.4.59ScalardafsInBytesread-onlycurrentTotal number of bytes, including DMA, received since the last reboot
1.3.6.1.4.1.789.1.12.4.60ScalardafsDirectInBytesread-onlycurrentTotal number of bytes received directly into memory since last reboot
1.3.6.1.4.1.789.1.12.4.61ScalardafsOutBytesread-onlycurrentTotal number of bytes, including DMA, sent since the last reboot
1.3.6.1.4.1.789.1.12.4.62ScalardafsDirectOutBytesread-onlycurrentTotal number of bytes sent directly into remote memory since the last reboot
1.3.6.1.4.1.789.1.12.5TabledafsSessionTablenot-accessiblecurrentA table containing current DAFS client session information.
1.3.6.1.4.1.789.1.12.5.1RowdafsSessionEntrynot-accessiblecurrentInformation about a particular DAFS session. An object of this type is transient, in that it ceases to exist when (or soon after) the client disconnects.
1.3.6.1.4.1.789.1.12.5.1.1ColumndafsSessionIndexread-onlycurrentA unique value for each session.
1.3.6.1.4.1.789.1.12.5.1.2ColumndafsSessionIdread-onlycurrentSession Identifier assigned by the server.
1.3.6.1.4.1.789.1.12.5.1.3ColumndafsSessionEndianread-onlycurrentByte order used on this session.
1.3.6.1.4.1.789.1.12.5.1.4ColumndafsSessionAllowBackChannelread-onlycurrentSession may use a back control channel.
1.3.6.1.4.1.789.1.12.5.1.5ColumndafsSessionAllowRdmaReadChannelread-onlycurrentSession may use a RDMA read channel.
1.3.6.1.4.1.789.1.12.5.1.6ColumndafsSessionUseChecksumsread-onlycurrentSession uses checksums.
1.3.6.1.4.1.789.1.12.5.1.7ColumndafsSessionMaxCredentialsread-onlycurrentMaximum number of credentials that can be registered on this session.
1.3.6.1.4.1.789.1.12.5.1.8ColumndafsSessionMaxRequestSizeread-onlycurrentMaximum size of a DAFS request.
1.3.6.1.4.1.789.1.12.5.1.9ColumndafsSessionMaxResponseSizeread-onlycurrentMaximum size of a DAFS response.
1.3.6.1.4.1.789.1.12.5.1.10ColumndafsSessionMaxRequestsread-onlycurrentMaximum number of concurrent requests.
1.3.6.1.4.1.789.1.12.5.1.11ColumndafsSessionInlineWriteHeaderSizeread-onlycurrentSize of DAFS headers plus padding to the start of data. Used to better align inline data.
1.3.6.1.4.1.789.1.12.5.1.12ColumndafsSessionClientIdStringread-onlycurrentClient ID string supplied by the client. Intended to uniquely identify that client.
1.3.6.1.4.1.789.1.12.5.1.13ColumndafsSessionClientVerifierread-onlycurrentSupplied by the client to uniquely identify an instance of a client.
1.3.6.1.4.1.789.1.12.5.1.14ColumndafsSessionNumCredentialsread-onlycurrentCurrent number of credentials registered on this session
1.3.6.1.4.1.789.1.12.5.1.15ColumndafsSessionNumRequestsread-onlycurrentCurrent number of active requests on this session
1.3.6.1.4.1.789.1.12.6TabledafsExportTablenot-accessiblecurrentA table containing DAFS Export filesystems.
1.3.6.1.4.1.789.1.12.6.1RowdafsExportEntrynot-accessiblecurrentInformation about a particular current DAFS export. An object of this type is transient, in that it ceases to exist when (or soon after) the export is deleted.
1.3.6.1.4.1.789.1.12.6.1.1ColumndafsExportIndexread-onlycurrentA unique value for each export. Its value ranges between 1 and the number of exports. The value for each export must remain constant at least from one re-initi…
1.3.6.1.4.1.789.1.12.6.1.2ColumndafsExportNameread-onlycurrentA textual string containing information about the export. This is the logical export name.
1.3.6.1.4.1.789.1.12.6.1.3ColumndafsExportPathread-onlycurrentA textual string containing information about the export. This is the local filesystem path to the export.
1.3.6.1.4.1.789.1.12.6.1.4ColumndafsExportEnabledread-onlycurrentThis export is available for access.
1.3.6.1.4.1.789.1.12.6.1.5ColumndafsExportRwModeread-onlycurrentGlobal export mode. This represents the maximum access rights.
1.3.6.1.4.1.789.1.12.6.1.6ColumndafsExportAccessListread-onlycurrentA textual string containing information about the export. This is the list of hosts that may access the export. If empty, all hosts may access the export.
1.3.6.1.4.1.789.1.13Nodevi
1.3.6.1.4.1.789.1.13.1NodeviaNodeConnection
1.3.6.1.4.1.789.1.13.1.1ScalarviaNodeSystemNameread-onlycurrentA string by which the node is identified in the cluster.
1.3.6.1.4.1.789.1.13.1.2ScalarviaCreatedread-onlycurrentThe number of VIs created.
1.3.6.1.4.1.789.1.13.1.3ScalarviaConnectRequestread-onlycurrentThe number of times Connect Request call is made.
1.3.6.1.4.1.789.1.13.1.4ScalarviaConnectWaitread-onlycurrentThe number of times Connect wait call is made.
1.3.6.1.4.1.789.1.13.1.5ScalarviaDisconnectread-onlycurrentNumber of times VI got disconnected without any error.
1.3.6.1.4.1.789.1.13.1.6ScalarviaConnectTimeOutread-onlycurrentNumber of times VI connect request got timed out.
1.3.6.1.4.1.789.1.13.1.7ScalarviaConnectedread-onlycurrentNumber of time VI got connected without any error.
1.3.6.1.4.1.789.1.13.1.8ScalarviaCurrConnectPendingread-onlycurrentThe number of VIs for which connect request is pending.
1.3.6.1.4.1.789.1.13.1.9ScalarviaCurrConnectWaitPendingread-onlycurrentThe number of VIs for which connect wait request is pending.
1.3.6.1.4.1.789.1.13.1.10ScalarviaCurrConnectedread-onlycurrentThe number of VIs for which the current state is CONNECTED.
1.3.6.1.4.1.789.1.13.1.11ScalarviaCurrErrorread-onlycurrentThe number of VIs for which the current state is ERROR
1.3.6.1.4.1.789.1.13.1.12ScalarviaTotalErrorread-onlycurrentThe number of VIs which encountered error state.
1.3.6.1.4.1.789.1.13.1.13ScalarviaInMsgsread-onlycurrentThe total number of incoming Messages received.
1.3.6.1.4.1.789.1.13.1.14ScalarviaInRdmaread-onlycurrentThe total number of incoming RDMA requests received.
1.3.6.1.4.1.789.1.13.1.15ScalarviaInBytesread-onlycurrentThe total number of incoming bytes received, including those received in error. This count includes bytes received on currently established connections. This c…
1.3.6.1.4.1.789.1.13.1.16ScalarviaInRDMAReadBytesread-onlycurrentThe total number of incoming bytes received through RDMA read, including those received in error. This count includes bytes received on currently established c…
1.3.6.1.4.1.789.1.13.1.17ScalarviaInRDMAWriteBytesread-onlycurrentThe total number of bytes received through incoming RDMA writes, including those received in error. This count includes bytes received on currently established…
1.3.6.1.4.1.789.1.13.1.18ScalarviaOutMsgsread-onlycurrentThe total number of Messages sent.
1.3.6.1.4.1.789.1.13.1.19ScalarviaOutRdmaread-onlycurrentThe total number of RDMA requests sent.
1.3.6.1.4.1.789.1.13.1.20ScalarviaOutBytesread-onlycurrentThe total number of bytes sent, including those sent in error. This count includes bytes sent on currently established connections.
1.3.6.1.4.1.789.1.13.1.21ScalarviaOutRDMAReadBytesread-onlycurrentThe total number of bytes sent through an incoming RDMA read request, including those sent in error. This count includes bytes sent on currently established co…
1.3.6.1.4.1.789.1.13.1.22ScalarviaOutRDMAWriteBytesread-onlycurrentThe total number of bytes sent through a RDMA write operation, including those sent in error. This count includes bytes sent on currently established connectio…
1.3.6.1.4.1.789.1.13.1.23TableviaConnTablenot-accessiblecurrentA table containing via connection specific information.
1.3.6.1.4.1.789.1.13.1.23.1RowviaConnEntrynot-accessiblecurrentA conceptual row of the viaConnTable containing information about a particular current via connection. Each row of this table is transient, and it ceases to ex…
1.3.6.1.4.1.789.1.13.1.23.1.1ColumnviaConnStateread-onlycurrentThe state of this via connection Legal States: Idle 1 Pending Connect 2 Connected 3 Error 4
1.3.6.1.4.1.789.1.13.1.23.1.2ColumnviaConnVINumberread-onlycurrentA number which uniquely defines a connection.
1.3.6.1.4.1.789.1.13.1.23.1.3ColumnviaConnRemoteNetAddressread-onlycurrentIP address of the remote system of the connection.
1.3.6.1.4.1.789.1.13.1.23.1.4ColumnviaConnLocalNetAddressread-onlycurrentLocal IP address of the connection.
1.3.6.1.4.1.789.1.13.1.23.1.5ColumnviaConnRemotePortNumberread-onlycurrentRemote TCP port number of the connection.
1.3.6.1.4.1.789.1.13.1.23.1.6ColumnviaConnLocalPortNumberread-onlycurrentLocal TCP port number of the connection.
1.3.6.1.4.1.789.1.13.1.23.1.7ColumnviaConnLocalDescriminatorread-onlycurrentAn identifier used by the local process to identify the VI connection.
1.3.6.1.4.1.789.1.13.1.23.1.8ColumnviaConnRemoteDescriminatorread-onlycurrentAn identifier used by the remote process to identify the VI connection.
1.3.6.1.4.1.789.1.13.1.23.1.9ColumnviaConnLocalMaxTransferSizeread-onlycurrentThe local limit on the maximum packet size that can be transferred through the connection.
1.3.6.1.4.1.789.1.13.1.23.1.10ColumnviaConnRemoteMaxTransferSizeread-onlycurrentThe remote limit on the maximum packet size that can be transferred through the connection.
1.3.6.1.4.1.789.1.13.1.23.1.11ColumnviaConnLocalEnableRdmaWriteread-onlycurrentThe value is 1 if remote DMA write is enabled in the local system otherwise, it is 0.
1.3.6.1.4.1.789.1.13.1.23.1.12ColumnviaConnLocalEnableRdmaReadread-onlycurrentThe value is 1 if remote DMA read is enabled in the local system otherwise, it is 0.
1.3.6.1.4.1.789.1.13.1.23.1.13ColumnviaConnRemoteEnableRdmaWriteread-onlycurrentThe value is 1 if remote DMA write is enabled in the remote system otherwise, it is 0.
1.3.6.1.4.1.789.1.13.1.23.1.14ColumnviaConnRemoteEnableRdmaReadread-onlycurrentThe value is 1 if remote DMA read is enabled in the remote system otherwise, it is 0.
1.3.6.1.4.1.789.1.13.1.23.1.15ColumnviaConnSentMessagesread-onlycurrentTotal number of messages sent through the connection.
1.3.6.1.4.1.789.1.13.1.23.1.16ColumnviaConnSentRdmaReadMessagesread-onlycurrentTotal number of rdma read messages sent through the connection.
1.3.6.1.4.1.789.1.13.1.23.1.17ColumnviaConnSentRdmaWriteMessagesread-onlycurrentTotal number of rdma write messages sent through the connection.
1.3.6.1.4.1.789.1.13.1.23.1.18ColumnviaConnRcvdMessagesread-onlycurrentTotal number of messages received through the connection.
1.3.6.1.4.1.789.1.13.1.23.1.19ColumnviaConnRcvdRdmaReadMessagesread-onlycurrentTotal number of rdma read messages received through the connection.
1.3.6.1.4.1.789.1.13.1.23.1.20ColumnviaConnRcvdRdmaWriteMessagesread-onlycurrentTotal number of rdma write messages received through the connection.
1.3.6.1.4.1.789.1.13.2NodeviaErrors
1.3.6.1.4.1.789.1.13.2.1ScalarviaErrPostDescread-onlycurrentThe total number of descriptors completed in error by NIC.
1.3.6.1.4.1.789.1.13.2.2ScalarviaErrConnLostread-onlycurrentThe total number of Lost Connection errors.
1.3.6.1.4.1.789.1.13.2.3ScalarviaErrRecvQEmptyread-onlycurrentThe total number of errors due to an empty receive Queue.
1.3.6.1.4.1.789.1.13.2.4ScalarviaErrRdmawProtread-onlycurrentThe total number of remote DMA write protection errors.
1.3.6.1.4.1.789.1.13.2.5ScalarviaErrRdmarProtread-onlycurrentThe total number of remote DMA read protection errors.
1.3.6.1.4.1.789.1.13.2.6ScalarviaErrCompProtread-onlycurrentThe total number of protection errors.
1.3.6.1.4.1.789.1.13.2.7ScalarviaErrorThresholdread-onlycurrentSetting this threshold will cause a trap to be enabled such that if the total error exceeds error threshold set a viaNodeErrorsTrap trap will be generated.
1.3.6.1.4.1.789.1.13.3NodeviaNicAttributes
1.3.6.1.4.1.789.1.13.3.1TableviaNicTablenot-accessiblecurrentA table containing via NIC-specific information.
1.3.6.1.4.1.789.1.13.3.1.1RowviaNicEntrynot-accessiblecurrentA conceptual row of the viaNicTable containing information about a particular present VINic.
1.3.6.1.4.1.789.1.13.3.1.1.1ColumnviaNicIndexread-onlycurrentThe index of the NIC in the NIC table.
1.3.6.1.4.1.789.1.13.3.1.1.2ColumnviaNameread-onlycurrentThe symbolic name of the NIC device.
1.3.6.1.4.1.789.1.13.3.1.1.3ColumnviaHardwareVersionread-onlycurrentThe version of the VINIC described by this MIB.
1.3.6.1.4.1.789.1.13.3.1.1.4ColumnviaProviderVersionread-onlycurrentThe version of the VI provider.
1.3.6.1.4.1.789.1.13.3.1.1.5ColumnviaNicAddressread-onlycurrentThe Network address of this NIC.
1.3.6.1.4.1.789.1.13.3.1.1.6ColumnviaThreadSaferead-onlycurrent1 if synchronization model is thread safe else 0.
1.3.6.1.4.1.789.1.13.3.1.1.7ColumnviaMaxDiscriminatorLengthread-onlycurrentThe maximum number of bytes that the VI provider allows for a connection discriminator.
1.3.6.1.4.1.789.1.13.3.1.1.8ColumnviaMaxRegisterBytesread-onlycurrentMaximum number of bytes that can be registered.
1.3.6.1.4.1.789.1.13.3.1.1.9ColumnviaMaxRegisterRegionsread-onlycurrentMaximum number of memory regions that can be registered.
1.3.6.1.4.1.789.1.13.3.1.1.10ColumnviaMaxRegisterBlockBytesread-onlycurrentLargest contiguous block of memory that can be registered.
1.3.6.1.4.1.789.1.13.3.1.1.11ColumnviaMaxVIread-onlycurrentThe limit on the total number of VI instances this entity can support.
1.3.6.1.4.1.789.1.13.3.1.1.12ColumnviaMaxDescriptorsPerQueueread-onlycurrentMaximum Descriptors per VI Work Queue that this VI provider can support.
1.3.6.1.4.1.789.1.13.3.1.1.13ColumnviaMaxSegmentsPerDescread-onlycurrentMaximum number of segments per descriptor that this VI provider can support.
1.3.6.1.4.1.789.1.13.3.1.1.14ColumnviaMaxCQread-onlycurrentMaximum number of completion queues this VI provider can support.
1.3.6.1.4.1.789.1.13.3.1.1.15ColumnviaMaxCQEntriesread-onlycurrentMaximum number of Completion queue entries per completion queue that this VI provider can support.
1.3.6.1.4.1.789.1.13.3.1.1.16ColumnviaMaxTransferSizeread-onlycurrentThe maximum transfer size supported by the VI Nic. The maximum transfer size is the amount of data that can be described by a single VI descriptor.
1.3.6.1.4.1.789.1.13.3.1.1.17ColumnviaNativeMTUread-onlycurrentThe native MTU size of the underlying network. For frame-based networks, this could reflect its native frame size. For cell-based networks, it could reflect th…
1.3.6.1.4.1.789.1.13.3.1.1.18ColumnviaMaxPTagsread-onlycurrentThe maximum number of protection tags that are supported by this VI provider.
1.3.6.1.4.1.789.1.13.3.1.1.19ColumnviaCurrRegisterBytesread-onlycurrentNumber of bytes registered by the VI user for this NIC.
1.3.6.1.4.1.789.1.13.3.1.1.20ColumnviaCurrRegisterRegionsread-onlycurrentNumber of memory regions that is registered by VI user for this NIC.
1.3.6.1.4.1.789.1.13.3.1.1.21ColumnviaCurrVIread-onlycurrentThe current number of VI instances for this NIC.
1.3.6.1.4.1.789.1.13.3.1.1.22ColumnviaCurrCQread-onlycurrentCurrent number of completion queues this VI provider has.
1.3.6.1.4.1.789.1.13.3.1.1.23ColumnviaCurrPTagsread-onlycurrentCurrent Number of protection tags this VI provider has.
1.3.6.1.4.1.789.1.13.3.1.1.24ColumnviaConnectionListenPortread-onlycurrentPort number on which VI server is listening for VI connection request.
1.3.6.1.4.1.789.1.14Nodebackup
1.3.6.1.4.1.789.1.14.1Nodedump
1.3.6.1.4.1.789.1.14.1.1ScalardmpActivesread-onlyobsoleteNumber of active dump.
1.3.6.1.4.1.789.1.14.1.2ScalardmpAttemptsread-onlyobsoleteNumber of dump attempted.
1.3.6.1.4.1.789.1.14.1.3ScalardmpSuccessesread-onlyobsoleteNumber of dump succeeded.
1.3.6.1.4.1.789.1.14.1.4ScalardmpFailuresread-onlyobsoleteNumber of dump failed.
1.3.6.1.4.1.789.1.14.1.5TabledmpTablenot-accessibleobsoleteProvides a report of dumps on each dump subtree.
1.3.6.1.4.1.789.1.14.1.5.1RowdmpEntrynot-accessibleobsoleteShows statistics of dumps on an unique dump subtree.
1.3.6.1.4.1.789.1.14.1.5.1.1ColumndmpIndexread-onlyobsoleteIndex into the subtree dump table.
1.3.6.1.4.1.789.1.14.1.5.1.2ColumndmpStPathread-onlyobsoleteThe full path to the dump subtree. In the format of /vol/<volname>/...
1.3.6.1.4.1.789.1.14.1.5.1.3ColumndmpStAttemptsread-onlyobsoleteNo. of dump attempted for the subtree.
1.3.6.1.4.1.789.1.14.1.5.1.4ColumndmpStSuccessesread-onlyobsoleteNo. of dump succeeded for the subtree.
1.3.6.1.4.1.789.1.14.1.5.1.5ColumndmpStFailuresread-onlyobsoleteNo. of dump failed for the subtree.
1.3.6.1.4.1.789.1.14.1.5.1.6ColumndmpTimeread-onlyobsoleteThe start time for the last attempt to dump the subtree, including the currently running one. The time in seconds since January 1, 1970.
1.3.6.1.4.1.789.1.14.1.5.1.7ColumndmpStatusread-onlyobsoleteThe status for the last dump attempt on the subtree.
1.3.6.1.4.1.789.1.14.1.5.1.8ColumndmpLevelread-onlyobsoleteThe level of the dump.
1.3.6.1.4.1.789.1.14.1.5.1.9ColumndmpNumFilesread-onlyobsoleteThe number of files dumped.
1.3.6.1.4.1.789.1.14.1.5.1.10ColumndmpDataAmountread-onlyobsoleteThe amount of data dumped, in Megabytes.
1.3.6.1.4.1.789.1.14.1.5.1.11ColumndmpStartTimeread-onlyobsoleteThe start time of the dump. The time is in seconds since January 1, 1970.
1.3.6.1.4.1.789.1.14.1.5.1.12ColumndmpDurationread-onlyobsoleteThe duration of the dump.
1.3.6.1.4.1.789.1.14.2Noderestore
1.3.6.1.4.1.789.1.14.2.1ScalarrstActivesread-onlyobsoleteNumber of active restore.
1.3.6.1.4.1.789.1.14.2.2ScalarrstAttemptsread-onlyobsoleteNumber of restore attempted.
1.3.6.1.4.1.789.1.14.2.3ScalarrstSuccessesread-onlyobsoleteNumber of restore succeeded.
1.3.6.1.4.1.789.1.14.2.4ScalarrstFailuresread-onlyobsoleteNumber of restore failed.
1.3.6.1.4.1.789.1.16Nodevfiler
1.3.6.1.4.1.789.1.16.1ScalarvfilerIsLicensedread-onlycurrentWhether vfiler is licensed on the filer.
1.3.6.1.4.1.789.1.16.2ScalarvfFilersread-onlycurrentNumber of vfilers in the physical Filer.
1.3.6.1.4.1.789.1.16.3TablevfTablenot-accessiblecurrentProvide a report of per-vfiler general information
1.3.6.1.4.1.789.1.16.3.1RowvfEntrynot-accessiblecurrentProvide a report of per-vfiler information
1.3.6.1.4.1.789.1.16.3.1.1ColumnvfIndexread-onlycurrentA number that identifies this entry for the referenced vfiler.
1.3.6.1.4.1.789.1.16.3.1.2ColumnvfNameread-onlycurrentA textual string that contains the name of the referenced vfiler.
1.3.6.1.4.1.789.1.16.3.1.3ColumnvfUuidread-onlycurrentThe UUID of the referenced vfiler.
1.3.6.1.4.1.789.1.16.3.1.4ColumnvfIpAddressesread-onlycurrentThe total number of IP addresses for the referenced vfiler.
1.3.6.1.4.1.789.1.16.3.1.5ColumnvfStoragePathsread-onlycurrentThe total number of storage paths for the referenced vfiler.
1.3.6.1.4.1.789.1.16.3.1.6ColumnvfIpSpaceread-onlycurrentA textual string that contains the name of the ipspace that the referenced vfiler belongs to.
1.3.6.1.4.1.789.1.16.3.1.7ColumnvfAllowedProtocolsread-onlycurrentTotal number of protocols allowed for the referenced vfiler.
1.3.6.1.4.1.789.1.16.3.1.8ColumnvfDisallowedProtocolsread-onlycurrentTotal number of protocols disallowed for the referenced vfiler.
1.3.6.1.4.1.789.1.16.3.1.9ColumnvfStateread-onlycurrentStatus of the vfiler: Running or stopped.
1.3.6.1.4.1.789.1.16.4TablevfIpTablenot-accessiblecurrentProvide a report of per-vfiler IP addresses information
1.3.6.1.4.1.789.1.16.4.1RowvfIpEntrynot-accessiblecurrentProvide a report of per-vfiler IP addresses information
1.3.6.1.4.1.789.1.16.4.1.1ColumnvfFiIndexread-onlycurrentA number that identifies the referenced vfiler.
1.3.6.1.4.1.789.1.16.4.1.2ColumnvfIpIndexread-onlycurrentA number that identifies which IP address in the referenced vfiler.
1.3.6.1.4.1.789.1.16.4.1.3ColumnvfIpAddrread-onlycurrentA IP address for the referenced vfiler.
1.3.6.1.4.1.789.1.16.5TablevfSpTablenot-accessiblecurrentProvide a report of per-vfiler storage path information
1.3.6.1.4.1.789.1.16.5.1RowvfSpEntrynot-accessiblecurrentProvide a report of per-vfiler storage path information
1.3.6.1.4.1.789.1.16.5.1.1ColumnvfFsIndexread-onlycurrentA number that identifies the referenced vfiler.
1.3.6.1.4.1.789.1.16.5.1.2ColumnvfSpIndexread-onlycurrentA number that identifies which storage path in the referenced vfiler.
1.3.6.1.4.1.789.1.16.5.1.3ColumnvfSpNameread-onlycurrentThe storage path name for the referenced vfiler.
1.3.6.1.4.1.789.1.16.6TablevfProTablenot-accessiblecurrentProvide a report of per-vfiler protocol information
1.3.6.1.4.1.789.1.16.6.1RowvfProEntrynot-accessiblecurrentProvide a report of per-vfiler protocol information
1.3.6.1.4.1.789.1.16.6.1.1ColumnvfFpIndexread-onlycurrentA number that identifies the referenced vfiler.
1.3.6.1.4.1.789.1.16.6.1.2ColumnvfProIndexread-onlycurrentA number that identifies a protocol in the referenced vfiler.
1.3.6.1.4.1.789.1.16.6.1.3ColumnvfProNameread-onlycurrentA textual string that contains the protocol name for the referenced vfiler.
1.3.6.1.4.1.789.1.16.6.1.4ColumnvfProStatusread-onlycurrentWhether the referenced vfiler protocol is allowed or disallowed.
1.3.6.1.4.1.789.1.17Nodeblocks
1.3.6.1.4.1.789.1.17.1ScalarfcpIsLicensedread-onlycurrentWhether FCP access protocols are licensed on the filer.
1.3.6.1.4.1.789.1.17.2ScalariscsiIsLicensedread-onlycurrentWhether iSCSI access protocols are licensed on the filer.
1.3.6.1.4.1.789.1.17.3ScalarfcpLowReadBytesread-onlydeprecatedThe total number of bytes read via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is de…
1.3.6.1.4.1.789.1.17.4ScalarfcpHighReadBytesread-onlydeprecatedThe total number of bytes read via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is dep…
1.3.6.1.4.1.789.1.17.5ScalarfcpLowWriteBytesread-onlydeprecatedThe total number of bytes written via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is…
1.3.6.1.4.1.789.1.17.6ScalarfcpHighWriteBytesread-onlydeprecatedThe total number of bytes written via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is …
1.3.6.1.4.1.789.1.17.7ScalariscsiLowReadBytesread-onlydeprecatedThe total number of bytes read via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is …
1.3.6.1.4.1.789.1.17.8ScalariscsiHighReadBytesread-onlydeprecatedThe total number of bytes read via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is d…
1.3.6.1.4.1.789.1.17.9ScalariscsiLowWriteBytesread-onlydeprecatedThe total number of bytes written via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object …
1.3.6.1.4.1.789.1.17.10ScalariscsiHighWriteBytesread-onlydeprecatedThe total number of bytes written via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object i…
1.3.6.1.4.1.789.1.17.11ScalariscsiHighOpsread-onlydeprecatedThe total number of iSCSI ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is depr…
1.3.6.1.4.1.789.1.17.12ScalariscsiLowOpsread-onlydeprecatedThe total number of iSCSI ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is dep…
1.3.6.1.4.1.789.1.17.13ScalarfcpHighOpsread-onlydeprecatedThe total number of FCP ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprec…
1.3.6.1.4.1.789.1.17.14ScalarfcpLowOpsread-onlydeprecatedThe total number of FCP ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is depre…
1.3.6.1.4.1.789.1.17.15Nodelun
1.3.6.1.4.1.789.1.17.15.1ScalarlunCountread-onlycurrentNumber of LUNs in the Filer in 7-mode. Unsupported in Clustered Data ONTAP.
1.3.6.1.4.1.789.1.17.15.2TablelunTablenot-accessibleobsoleteProvide a report of per-LUN general information.
1.3.6.1.4.1.789.1.17.15.2.1RowlunEntrynot-accessiblecurrentProvide a report of per-LUN information
1.3.6.1.4.1.789.1.17.15.2.1.1ColumnlunIndexread-onlycurrentA number that identifies the referenced LUN.
1.3.6.1.4.1.789.1.17.15.2.1.2ColumnlunNameread-onlycurrentThe name of the LUN. This is also the path to the LUN on the filer.
1.3.6.1.4.1.789.1.17.15.2.1.3ColumnlunCommentread-onlycurrentThe comment, if any, for this LUN.
1.3.6.1.4.1.789.1.17.15.2.1.4ColumnlunSizeLowread-onlydeprecatedSize of the LUN in bytes. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lunSize64 instead.
1.3.6.1.4.1.789.1.17.15.2.1.5ColumnlunSizeHighread-onlydeprecatedSize of the LUN in bytes. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use lunSize64 instead.
1.3.6.1.4.1.789.1.17.15.2.1.6ColumnlunMappedread-onlycurrentThis LUN has been mapped to at least one initiator group.
1.3.6.1.4.1.789.1.17.15.2.1.7ColumnlunSerialNumberread-onlycurrentThe 12 character SCSI serial number of the LUN.
1.3.6.1.4.1.789.1.17.15.2.1.8ColumnlunQtreeNameread-onlycurrentA string that indicates which qtree this LUN belongs to.
1.3.6.1.4.1.789.1.17.15.2.1.9ColumnlunHighOpsread-onlydeprecatedThe total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned …
1.3.6.1.4.1.789.1.17.15.2.1.10ColumnlunLowOpsread-onlydeprecatedThe total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned…
1.3.6.1.4.1.789.1.17.15.2.1.11ColumnlunHighReadBytesread-onlydeprecatedThe total number of bytes read from this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. …
1.3.6.1.4.1.789.1.17.15.2.1.12ColumnlunLowReadBytesread-onlydeprecatedThe total number of bytes read from this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.…
1.3.6.1.4.1.789.1.17.15.2.1.13ColumnlunHighWriteBytesread-onlydeprecatedThe total number of bytes written to this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.…
1.3.6.1.4.1.789.1.17.15.2.1.14ColumnlunLowWriteBytesread-onlydeprecatedThe total number of bytes written to this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer…
1.3.6.1.4.1.789.1.17.15.2.1.15ColumnlunHighErrorsread-onlydeprecatedThe total number of errors seen on this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer. T…
1.3.6.1.4.1.789.1.17.15.2.1.16ColumnlunLowErrorsread-onlydeprecatedThe total number of errors seen on this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer. …
1.3.6.1.4.1.789.1.17.15.2.1.17ColumnlunOnlineread-onlycurrentWhether the LUN is online.
1.3.6.1.4.1.789.1.17.15.2.1.18ColumnlunSnapStatusread-onlycurrentWhether a snapshot of this LUN can be taken. Not supported in c-mode.
1.3.6.1.4.1.789.1.17.15.2.1.19ColumnlunShareStatusread-onlycurrentThe sharing status for the LUN. Not supported in c-mode.
1.3.6.1.4.1.789.1.17.15.2.1.20ColumnlunSpaceReservedread-onlycurrentWhether the LUN has space reservation enabled.
1.3.6.1.4.1.789.1.17.15.2.1.21ColumnlunStatsResetTimeread-onlycurrentNumber of seconds since this LUN's stats were last reset.
1.3.6.1.4.1.789.1.17.15.2.1.22ColumnlunHighReadOpsread-onlydeprecatedThe total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit uns…
1.3.6.1.4.1.789.1.17.15.2.1.23ColumnlunLowReadOpsread-onlydeprecatedThe total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsi…
1.3.6.1.4.1.789.1.17.15.2.1.24ColumnlunHighWriteOpsread-onlydeprecatedThe total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit un…
1.3.6.1.4.1.789.1.17.15.2.1.25ColumnlunLowWriteOpsread-onlydeprecatedThe total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit uns…
1.3.6.1.4.1.789.1.17.15.2.1.26ColumnlunHighOtherOpsread-onlydeprecatedThe total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the least significant 32 …
1.3.6.1.4.1.789.1.17.15.2.1.27ColumnlunLowOtherOpsread-onlydeprecatedThe total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the most significant 32 b…
1.3.6.1.4.1.789.1.17.15.2.1.28ColumnlunSize64read-onlycurrentSize of the LUN in bytes. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.17.15.2.1.29Columnlun64Opsread-onlycurrentThe total number of Target side SCSI ops for this LUN since the stats were last reset. This object all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.17.15.2.1.30Columnlun64ReadBytesread-onlycurrentThe total number of bytes read from this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.17.15.2.1.31Columnlun64WriteBytesread-onlycurrentThe total number of bytes written to this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.17.15.2.1.32Columnlun64Errorsread-onlycurrentThe total number of errors seen on this LUN since the stats were last reset. This object returns all the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.17.15.2.1.33Columnlun64ReadOpsread-onlycurrentThe total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.17.15.2.1.34Columnlun64WriteOpsread-onlycurrentThe total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.17.15.2.1.35Columnlun64OtherOpsread-onlycurrentThe total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns all of the 64 bit unsigne…
1.3.6.1.4.1.789.1.17.15.2.1.36ColumnlunAlignmentread-onlycurrentThe alignment of the LUN. Possible values are: 'aligned': LUN is aligned. 'misaligned': LUN is misaligned. 'possibly_misaligned': LUN is possibly misaligned. '…
1.3.6.1.4.1.789.1.17.15.2.1.37ColumnlunVserverread-onlycurrentName of the vserver to which the LUN belongs. This field is returned only from the c-mode cluster and vserver management interfaces.
1.3.6.1.4.1.789.1.17.15.3TablelunMapTablenot-accessibleobsoleteProvide a table listing the initiator group to Logical Unit Number mapping for each LUN.
1.3.6.1.4.1.789.1.17.15.3.1RowlunMapEntrynot-accessiblecurrentProvide a per LUN and Initiator group mapping of SCSI logical unit numbers.
1.3.6.1.4.1.789.1.17.15.3.1.1ColumnlunMapLUNIndexread-onlycurrentA number that identifies the LUN in the table.
1.3.6.1.4.1.789.1.17.15.3.1.2ColumnlunMapInitiatorGroupIndexread-onlycurrentA number that identifies an initiator group in the table.
1.3.6.1.4.1.789.1.17.15.3.1.3ColumnlunMapLUNNameread-onlycurrentThe name of the LUN.
1.3.6.1.4.1.789.1.17.15.3.1.4ColumnlunMapInitiatorGroupNameread-onlycurrentThe name of the initiator group that this LUN is mapped to.
1.3.6.1.4.1.789.1.17.15.3.1.5ColumnlunMapLogicalUnitNumberread-onlycurrentSCSI Logical Unit Number that this LUN is mapped to for this initiator group.
1.3.6.1.4.1.789.1.17.15.3.1.6ColumnlunMapVserverread-onlycurrentName of the vserver containing the LUN and initiator group. This field is returned only from the c-mode management and cluster interfaces.
1.3.6.1.4.1.789.1.17.16Nodeinitiator
1.3.6.1.4.1.789.1.17.16.1TableinitiatorGroupTablenot-accessibleobsoleteProvide a report of per-initiator group general information
1.3.6.1.4.1.789.1.17.16.1.1RowinitiatorGroupEntrynot-accessiblecurrentProvide a report of per-initiator group information
1.3.6.1.4.1.789.1.17.16.1.1.1ColumninitiatorGroupIndexread-onlycurrentA number that identifies a specific initiator group.
1.3.6.1.4.1.789.1.17.16.1.1.2ColumninitiatorGroupNameread-onlycurrentThe name of the initiator group
1.3.6.1.4.1.789.1.17.16.1.1.3ColumninitiatorGroupTyperead-onlycurrentType of this initiator group, either iSCSI or FCP
1.3.6.1.4.1.789.1.17.16.1.1.4ColumninitiatorGroupOSread-onlycurrentOperating system the clients in this initiator group run. This governs the finer details of SCSI protocol interaction with these initiators
1.3.6.1.4.1.789.1.17.16.1.1.5ColumninitiatorGroupThrottleReserveread-onlycurrentPercentage of filer scsi command blocks reserved for this initiator group
1.3.6.1.4.1.789.1.17.16.1.1.6ColumninitiatorGroupThrottleBorrowread-onlycurrentTrue if this initiator group is allowed to exceed its throttle settings if more resources are needed and otherwise available. If initiatorGroupThrottleReserve …
1.3.6.1.4.1.789.1.17.16.1.1.7ColumninitiatorGroupUsePartnerread-onlycurrentThe takeover mode for the initiator group. This is only applicable to FCP initiator groups on clustered filers
1.3.6.1.4.1.789.1.17.16.1.1.8ColumninitiatorGroupUseALUAread-onlycurrentIf true this initiator group supports Asymmetric Logical Unit Access.
1.3.6.1.4.1.789.1.17.16.1.1.9ColumninitiatorGroupVserverread-onlycurrentName of the vserver containing the initiator group. This field is available only from the c-mode cluster and vserver management interfaces.
1.3.6.1.4.1.789.1.17.16.2TableinitiatorGroupMemberTablenot-accessibleobsoleteTable of individual Initiator names in each Initiator group
1.3.6.1.4.1.789.1.17.16.2.1RowinitiatorGroupMemberEntrynot-accessiblecurrentProvide a report of per-initiator group information
1.3.6.1.4.1.789.1.17.16.2.1.1ColumninitiatorGroupMemberIndexread-onlycurrentA number that identifies a specific initiator group.
1.3.6.1.4.1.789.1.17.16.2.1.2ColumninitiatorGroupMemberNameIndexread-onlycurrentA number the identifies the initiator in the group.
1.3.6.1.4.1.789.1.17.16.2.1.3ColumninitiatorNameread-onlycurrentA textual name for this initiator.
1.3.6.1.4.1.789.1.17.16.3TableinitiatorListTablenot-accessiblecurrentTable of initiators that are connected to the filer.
1.3.6.1.4.1.789.1.17.16.3.1RowinitiatorListEntrynot-accessiblecurrentProvide a report of per-connected-initiator information.
1.3.6.1.4.1.789.1.17.16.3.1.1ColumninitiatorListEntryIndexread-onlycurrentA number that identifies the initiator connected to the target adapter.
1.3.6.1.4.1.789.1.17.16.3.1.2ColumntargetAdapterNameread-onlycurrentThe name of the target adapter in the filer. In c-mode, this field returns the target LIF name.
1.3.6.1.4.1.789.1.17.16.3.1.3ColumnconnectedInitiatorNodeNameread-onlycurrentA textual name for this initiator node.
1.3.6.1.4.1.789.1.17.16.3.1.4ColumnconnectedInitiatorPortNameread-onlycurrentThe FibreChannel device's portname. This is FCP only.
1.3.6.1.4.1.789.1.17.16.3.1.5ColumnconnectedInitiatorTyperead-onlycurrentType of this init group, either iSCSI or FCP
1.3.6.1.4.1.789.1.17.16.3.1.6ColumnconnectedInitiatorIsidread-onlycurrentThe iSCSI isid (initiator session id) for this initiator. This is iSCSI only.
1.3.6.1.4.1.789.1.17.16.3.1.7ColumnconnectedInitiatorPortalGroupread-onlycurrentThe iSCSI portal group ID for this initiator. This is iSCSI only.
1.3.6.1.4.1.789.1.17.16.3.1.8ColumnconnectedInitiatorVserverread-onlycurrentName of the vserver hosting the LIF on which the initiator connection is made. This field is returned only from the c-mode cluster and vserver management inter…
1.3.6.1.4.1.789.1.17.17NodefcpTarget
1.3.6.1.4.1.789.1.17.17.1TablefcpTargetTablenot-accessiblecurrentProvide a report of fcp target adapter general information. This table is not available from the c-mode management interfaces
1.3.6.1.4.1.789.1.17.17.1.1RowfcpTargetEntrynot-accessiblecurrentProvide a report of per fcp target device information
1.3.6.1.4.1.789.1.17.17.1.1.1ColumnfcpTargetTableIndexread-onlycurrentA number that identifies a specific fcp target device.
1.3.6.1.4.1.789.1.17.17.1.1.2ColumnfcpTargetNameread-onlycurrentThe name of the fcp target device
1.3.6.1.4.1.789.1.17.17.1.1.3ColumnfcpTargetNNread-onlycurrentThe FC WWNN of the fcp target device
1.3.6.1.4.1.789.1.17.17.1.1.4ColumnfcpTargetPNread-onlycurrentThe FC WWPN of the fcp target device
1.3.6.1.4.1.789.1.17.17.1.1.5ColumnfcpTargetSpeedread-onlycurrentspeed in gigabits per second. 0 is unknown.
1.3.6.1.4.1.789.1.17.17.1.1.6ColumnfcpTargetStatusread-onlycurrentStatus of the fcp target adapter
1.3.6.1.4.1.789.1.17.17.1.1.7ColumnfcpTargetStandbyread-onlycurrentWhether this target adapter is in standby mode.
1.3.6.1.4.1.789.1.17.17.1.1.8ColumnfcpTargetTopologyread-onlycurrentfibre channel topology for this adapter.
1.3.6.1.4.1.789.1.17.17.1.1.9ColumnfcpTargetTyperead-onlycurrentResponsibility/Type for this adapter.
1.3.6.1.4.1.789.1.17.18ScalarfcpCfModeread-onlycurrentFailover setting for the FCP target cluster. This field is not available from the c-mode management interfaces
1.3.6.1.4.1.789.1.17.19Nodepset
1.3.6.1.4.1.789.1.17.19.1TablepsetTablenot-accessibleobsoleteProvide a report of portset general information
1.3.6.1.4.1.789.1.17.19.1.1RowpsetEntrynot-accessiblecurrentProvide a report of portset information
1.3.6.1.4.1.789.1.17.19.1.1.1ColumnpsetIndexread-onlycurrentA number that identifies a specific port set.
1.3.6.1.4.1.789.1.17.19.1.1.2ColumnpsetNameread-onlycurrentThe name of the port set
1.3.6.1.4.1.789.1.17.19.1.1.3ColumnpsetTyperead-onlycurrentType of this port set, either iSCSI, fcp or mixed.
1.3.6.1.4.1.789.1.17.19.1.1.4ColumnpsetVserverread-onlycurrentName of the vserver to which the port set belongs. This field is returned only from the c-mode cluster and vserver management interfaces.
1.3.6.1.4.1.789.1.17.19.2TablepsetMemberTablenot-accessibleobsoleteTable of individual Port names in each Port set
1.3.6.1.4.1.789.1.17.19.2.1RowpsetMemberEntrynot-accessiblecurrentProvide a report of portset port information
1.3.6.1.4.1.789.1.17.19.2.1.1ColumnpsetMemberIndexread-onlycurrentA number that identifies a specific port set.
1.3.6.1.4.1.789.1.17.19.2.1.2ColumnpsetMemberNameIndexread-onlycurrentA number the identifies the port in the set.
1.3.6.1.4.1.789.1.17.19.2.1.3ColumnpsetPortNameread-onlycurrentA textual name for this port.
1.3.6.1.4.1.789.1.17.19.2.1.4ColumnpsetPortVserverread-onlycurrentName of the vserver to which the port set and LIFs in the port set belong. This field is available from c-mode management interfaces only.
1.3.6.1.4.1.789.1.17.20Scalarfcp64ReadBytesread-onlycurrentThe total number of bytes read via FCP since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode…
1.3.6.1.4.1.789.1.17.21Scalarfcp64WriteBytesread-onlycurrentThe total number of bytes written via FCP since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-m…
1.3.6.1.4.1.789.1.17.22Scalariscsi64ReadBytesread-onlycurrentThe total number of bytes read via iSCSI since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mo…
1.3.6.1.4.1.789.1.17.23Scalariscsi64WriteBytesread-onlycurrentThe total number of bytes written via iSCSI since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c…
1.3.6.1.4.1.789.1.17.24Scalariscsi64Opsread-onlycurrentThe total number of iSCSI ops handled since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode …
1.3.6.1.4.1.789.1.17.25Scalarfcp64Opsread-onlycurrentThe total number of FCP ops handled since the last boot. This object returns all of the 64 bit unsigned integer. This field is not available from the c-mode ma…
1.3.6.1.4.1.789.1.17.26NodefcpTargetPort
1.3.6.1.4.1.789.1.17.26.1TablefcpTargetPortTablenot-accessibleobsoleteProvide a report of fcp target port general information. This table is available from Clustered Data ONTAP management interfaces only.
1.3.6.1.4.1.789.1.17.26.1.1RowfcpTargetPortEntrynot-accessiblecurrentProvide a report of per fcp target port device information.
1.3.6.1.4.1.789.1.17.26.1.1.1ColumnfcpTargetPortNodeNameread-onlycurrentName of the node hosting the FCP target port.
1.3.6.1.4.1.789.1.17.26.1.1.2ColumnfcpTargetPortNameread-onlycurrentFCP target port name.
1.3.6.1.4.1.789.1.17.26.1.1.3ColumnfcpTargetPortSpeedread-onlycurrentSpeed in gigabits per second. 0 indicates speed is set to auto.
1.3.6.1.4.1.789.1.17.26.1.1.4ColumnfcpTargetPortStandbyread-onlycurrentWhether this target adapter is in standby mode.
1.3.6.1.4.1.789.1.17.26.1.1.5ColumnfcpTargetPortTopologyread-onlycurrentFibre channel topology for this adapter.
1.3.6.1.4.1.789.1.17.27NodefcpTargetLif
1.3.6.1.4.1.789.1.17.27.1TablefcpTargetLifTablenot-accessibleobsoleteProvide a report of FCP target LIFs general information. This table is available from Clustered Data ONTAP management interfaces only.
1.3.6.1.4.1.789.1.17.27.1.1RowfcpTargetLifEntrynot-accessiblecurrentProvide a report of per fcp target LIF information.
1.3.6.1.4.1.789.1.17.27.1.1.1ColumnfcpTargetLifVserverread-onlycurrentVserver containing the FCP target LIF.
1.3.6.1.4.1.789.1.17.27.1.1.2ColumnfcpTargetLifNameread-onlycurrentThe name of the FCP target device.
1.3.6.1.4.1.789.1.17.27.1.1.3ColumnfcpTargetLifHomeNoderead-onlycurrentThe home node of the FCP target LIF.
1.3.6.1.4.1.789.1.17.27.1.1.4ColumnfcpTargetLifHomePortread-onlycurrentThe home port of the FCP target LIF.
1.3.6.1.4.1.789.1.17.27.1.1.5ColumnfcpTargetLifNNread-onlycurrentThe FC WWNN of the FCP target hosting the LIF.
1.3.6.1.4.1.789.1.17.27.1.1.6ColumnfcpTargetLifPNread-onlycurrentThe FC WWPN of the FCP target LIF.
1.3.6.1.4.1.789.1.17.27.1.1.7ColumnfcpTargetLifStatusAdminread-onlycurrentStatus of the FCP target LIF assigned by an administrator.
1.3.6.1.4.1.789.1.17.27.1.1.8ColumnfcpTargetLifStatusOperread-onlycurrentOperational status of the FCP target LIF.
1.3.6.1.4.1.789.1.18Nodenfscache
1.3.6.1.4.1.789.1.18.1NodenfsCacheOptions
1.3.6.1.4.1.789.1.18.1.1ScalarnfsCacheIsEnabledread-onlycurrentWhether NFS caching is enabled on this system.
1.3.6.1.4.1.789.1.18.1.2ScalarnfsCacheIsLicensedread-onlycurrentWhether NFS caching is licensed on this system.
1.3.6.1.4.1.789.1.18.2NodenfsCacheStats
1.3.6.1.4.1.789.1.18.2.1ScalarnfsCacheBytesFromClientsread-onlydeprecatedTotal NFS bytes received from clients
1.3.6.1.4.1.789.1.18.2.2ScalarnfsCacheBytesToClientsread-onlydeprecatedTotal NFS bytes sent to clients
1.3.6.1.4.1.789.1.18.2.3ScalarnfsCacheBytesFromServersread-onlydeprecatedTotal NFS bytes received from servers
1.3.6.1.4.1.789.1.18.2.4ScalarnfsCacheBytesToServersread-onlydeprecatedTotal NFS bytes sent to servers
1.3.6.1.4.1.789.1.18.2.5ScalarnfsCacheTotalRequestsread-onlydeprecatedTotal NFS requests received
1.3.6.1.4.1.789.1.18.2.6ScalarnfsCacheHitRequestsread-onlydeprecatedTotal NFS requests resulting in cache hits
1.3.6.1.4.1.789.1.18.2.7ScalarnfsCacheMissRequestsread-onlydeprecatedTotal NFS requests resulting in cache misses
1.3.6.1.4.1.789.1.18.2.8ScalarnfsCacheMissCacheableRequestsread-onlycurrentTotal NFS requests that were cacheable misses
1.3.6.1.4.1.789.1.18.2.9ScalarnfsCacheMissUnCacheableRequestsread-onlycurrentTotal NFS requests that were uncacheable misses
1.3.6.1.4.1.789.1.18.2.10ScalarnfsCacheEjectRequestsread-onlycurrentTotal NFS requests resulting in object eject due to expiration
1.3.6.1.4.1.789.1.18.2.11ScalarnfsCacheVerifyRequestsread-onlycurrentTotal NFS requests resulting in object verification
1.3.6.1.4.1.789.1.18.2.12ScalarnfsCacheRpcRecordsread-onlycurrentTotal RPC records received
1.3.6.1.4.1.789.1.18.2.13ScalarnfsCacheBWSavingsread-onlycurrentBandwidth savings for NFS requests
1.3.6.1.4.1.789.1.18.2.14ScalarnfsCacheHighBytesFromClientsread-onlydeprecatedTotal NFS bytes received from clients. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCach…
1.3.6.1.4.1.789.1.18.2.15ScalarnfsCacheLowBytesFromClientsread-onlydeprecatedTotal NFS bytes received from clients. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCac…
1.3.6.1.4.1.789.1.18.2.16ScalarnfsCacheHighBytesToClientsread-onlydeprecatedTotal NFS bytes sent to clients. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64Byt…
1.3.6.1.4.1.789.1.18.2.17ScalarnfsCacheLowBytesToClientsread-onlydeprecatedTotal NFS bytes sent to clients. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64By…
1.3.6.1.4.1.789.1.18.2.18ScalarnfsCacheHighBytesFromServersread-onlydeprecatedTotal NFS bytes received from servers. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCach…
1.3.6.1.4.1.789.1.18.2.19ScalarnfsCacheLowBytesFromServersread-onlydeprecatedTotal NFS bytes received from servers. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCac…
1.3.6.1.4.1.789.1.18.2.20ScalarnfsCacheHighBytesToServersread-onlydeprecatedTotal NFS bytes sent to servers. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64Byt…
1.3.6.1.4.1.789.1.18.2.21ScalarnfsCacheLowBytesToServersread-onlydeprecatedTotal NFS bytes sent to servers. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64By…
1.3.6.1.4.1.789.1.18.2.22ScalarnfsCacheHighTotalRequestsread-onlydeprecatedTotal NFS requests received. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64TotalRe…
1.3.6.1.4.1.789.1.18.2.23ScalarnfsCacheLowTotalRequestsread-onlydeprecatedTotal NFS requests received. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nfsCache64TotalR…
1.3.6.1.4.1.789.1.18.2.24ScalarnfsCacheHighHitRequestsread-onlydeprecatedTotal NFS requests resulting in cache hits. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use nf…
1.3.6.1.4.1.789.1.18.2.25ScalarnfsCacheLowHitRequestsread-onlydeprecatedTotal NFS requests resulting in cache hits. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use n…
1.3.6.1.4.1.789.1.18.2.26ScalarnfsCacheHighMissRequestsread-onlydeprecatedTotal NFS requests resulting in cache misses. This object returns the most significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use …
1.3.6.1.4.1.789.1.18.2.27ScalarnfsCacheLowMissRequestsread-onlydeprecatedTotal NFS requests resulting in cache misses. This object returns the least significant 32 bits of the 64 bit unsigned integer. This object is deprecated - Use…
1.3.6.1.4.1.789.1.18.2.28ScalarnfsCache64BytesFromClientsread-onlycurrentTotal NFS bytes received from clients. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.18.2.29ScalarnfsCache64BytesToClientsread-onlycurrentTotal NFS bytes sent to clients. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.18.2.30ScalarnfsCache64BytesFromServersread-onlycurrentTotal NFS bytes received from servers. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.18.2.31ScalarnfsCache64BytesToServersread-onlycurrentTotal NFS bytes sent to servers. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.18.2.32ScalarnfsCache64TotalRequestsread-onlycurrentTotal NFS requests received. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.18.2.33ScalarnfsCache64HitRequestsread-onlycurrentTotal NFS requests resulting in cache hits. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.18.2.34ScalarnfsCache64MissRequestsread-onlycurrentTotal NFS requests resulting in cache misses. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.19Nodesnapvault
1.3.6.1.4.1.789.1.19.1ScalarsvOnread-onlycurrentIndicates whether snapvault has been turned on or not.
1.3.6.1.4.1.789.1.19.2ScalarsvSystemActiveDstNumberread-onlycurrentNumber of active snapvault destinations.
1.3.6.1.4.1.789.1.19.3ScalarsvSystemActiveSrcNumberread-onlycurrentNumber of active snapvault sources.
1.3.6.1.4.1.789.1.19.4ScalarsvSystemTotalPrimarySuccessesread-onlycurrentTotal number of successful snapvault transfers from the snapvault primary. Persistent across reboot.
1.3.6.1.4.1.789.1.19.5ScalarsvSystemTotalSecondarySuccessesread-onlycurrentTotal number of successful snapvault transfers to the snapvault secondary. Persistent across reboot.
1.3.6.1.4.1.789.1.19.6ScalarsvSystemTotalPrimaryFailuresread-onlycurrentTotal number of failed snapvault transfers on the snapvault primary. Persistent across reboot.
1.3.6.1.4.1.789.1.19.7ScalarsvSystemTotalSecondaryFailuresread-onlycurrentTotal number of failed snapvault transfers on the snapvault secondary. Persistent across reboot.
1.3.6.1.4.1.789.1.19.8ScalarsvSystemTotalSecondaryDefermentsread-onlycurrentTotal number of deferred snapvault transfers on the snapvault secondary. Persistent across reboot.
1.3.6.1.4.1.789.1.19.9ScalarsvPrimaryIsLicensedread-onlycurrentWhether the snapvault_client(primary) is licensed on the filer.
1.3.6.1.4.1.789.1.19.10ScalarsvSecondaryIsLicensedread-onlycurrentWhether the snapvault_server(secondary) is licensed on the filer.
1.3.6.1.4.1.789.1.19.11TablesnapvaultStatusTablenot-accessiblecurrentprovide a list of snapvault status.
1.3.6.1.4.1.789.1.19.11.1RowsnapvaultStatusEntrynot-accessiblecurrentProvide a report of current status of snapvault.
1.3.6.1.4.1.789.1.19.11.1.1ColumnsvIndexread-onlycurrentIndex into the snapvault status table.
1.3.6.1.4.1.789.1.19.11.1.2ColumnsvSrcread-onlycurrentSource of the snapvault relationship. <filer>:/vol/<qtree_name>
1.3.6.1.4.1.789.1.19.11.1.3ColumnsvDstread-onlycurrentDestination of the snapvault relationship. <filer>:/vol/<qtree_name>
1.3.6.1.4.1.789.1.19.11.1.4ColumnsvStatusread-onlycurrentCurrent transfer status of the snapvault relationship.
1.3.6.1.4.1.789.1.19.11.1.5ColumnsvStateread-onlycurrentCurrent state of the snapvault relationship.
1.3.6.1.4.1.789.1.19.11.1.6ColumnsvLagread-onlycurrentHow far behind from the source the destination is.
1.3.6.1.4.1.789.1.19.11.1.7ColumnsvTotalSuccessesread-onlycurrentTotal number of successful transfer since the snapvault relationship was established. Persistent across reboot.
1.3.6.1.4.1.789.1.19.11.1.8ColumnsvTotalRestartSuccessesread-onlycurrentTotal number of successful restarted transfer since the snapvault relationship was established. Persistent across reboot.
1.3.6.1.4.1.789.1.19.11.1.9ColumnsvTotalFailuresread-onlycurrentTotal number of failed or aborted transfer since the snapvault relationship was established. Persistent across reboot.
1.3.6.1.4.1.789.1.19.11.1.10ColumnsvTotalDefermentsread-onlycurrentTotal number of deferment since the snapvault relationship was established. Persistent across reboot.
1.3.6.1.4.1.789.1.19.11.1.11ColumnsvTotalTransMBsread-onlycurrentTotal transfer size in MB for the snapvault. Reset on reboot.
1.3.6.1.4.1.789.1.19.11.1.12ColumnsvTotalTransTimeSecondsread-onlycurrentTotal number of seconds spent in successful transfer for the snapvault relationship. Reset on reboot.
1.3.6.1.4.1.789.1.19.11.1.13ColumnsvThrottleValueread-onlycurrentCurrent throttle value for the snapvault relationship.
1.3.6.1.4.1.789.1.19.11.1.14ColumnsvSrcSnapshotTimeread-onlycurrentTime when the source snapshot was created. The time in seconds since January 1, 1970. The source snapshot here is the last snapshot successfully transferred fr…
1.3.6.1.4.1.789.1.19.11.1.15ColumnsvBaseSnapshotread-onlycurrentThe name of the current base snapshot for the snapvault relationship.
1.3.6.1.4.1.789.1.19.11.1.16ColumnsvLastTransTyperead-onlycurrentThe type of the previous successful transfer.
1.3.6.1.4.1.789.1.19.11.1.17ColumnsvLastTransMBsread-onlycurrentLast successful transfer size in MB for the snapvault relationship.
1.3.6.1.4.1.789.1.19.11.1.18ColumnsvLastTransTimeSecondsread-onlycurrentDuration of last successful transfer in seconds for the snapvault relationship.
1.3.6.1.4.1.789.1.19.12TablesnapvaultHostTablenot-accessiblecurrentProvide a list of remote snapvault hosts.
1.3.6.1.4.1.789.1.19.12.1RowsnapvaultHostEntrynot-accessiblecurrentProvide snapvault statistics for a remote host which has one or more current established relationships with the local snapvault system.
1.3.6.1.4.1.789.1.19.12.1.1ColumnsvHostIndexread-onlycurrentIndex into the snapvault remote host table.
1.3.6.1.4.1.789.1.19.12.1.2ColumnsvHostNameread-onlycurrentThe name of the remote snapvault host.
1.3.6.1.4.1.789.1.19.12.1.3ColumnsvHostTyperead-onlycurrentThe type of the remote snapvault host.
1.3.6.1.4.1.789.1.19.12.1.4ColumnsvHostTotalSuccessesread-onlycurrentTotal number of successful snapvault transfers for all current established relationships between the local snapvault system and the given remote host.
1.3.6.1.4.1.789.1.19.12.1.5ColumnsvHostTotalFailuresread-onlycurrentTotal number of failed snapvault transfers for all current established relationships between the local snapvault system and the given remote host.
1.3.6.1.4.1.789.1.19.12.1.6ColumnsvHostTotalDefermentsread-onlycurrentTotal number of deferred snapvault transfers for all current established relationships between the local snapvault system and the given remote host. 0 for snap…
1.3.6.1.4.1.789.1.19.13TablesnapvaultSchedTablenot-accessiblecurrentProvide a list of snapvault schedules.
1.3.6.1.4.1.789.1.19.13.1RowsnapvaultSchedEntrynot-accessiblecurrentProvide a report of schedules of snapvault.
1.3.6.1.4.1.789.1.19.13.1.1ColumnsvSchedIndexread-onlycurrentIndex into the snapvault schedule table.
1.3.6.1.4.1.789.1.19.13.1.2ColumnsvSchedVolumeread-onlycurrentThe name of the volume on the snapvault for the snapvault schedule. This does not have a /vol/ prefix.
1.3.6.1.4.1.789.1.19.13.1.3ColumnsvSchedSnapshotread-onlycurrentThe name of the snapshot for the snapvault schedule.
1.3.6.1.4.1.789.1.19.13.1.4ColumnsvSchedStatusread-onlycurrentCurrent status of the snapvault schedule.
1.3.6.1.4.1.789.1.19.13.1.5ColumnsvSchedTyperead-onlycurrentThe type of the snapvault schedule.
1.3.6.1.4.1.789.1.19.13.1.6ColumnsvSchedScheduleread-onlycurrentThe update schedule of the snapvault.
1.3.6.1.4.1.789.1.19.14ScalarsvDrPrimaryIsLicensedread-onlycurrentWhether the snapvault disaster recovery primary is licensed on the filer.
1.3.6.1.4.1.789.1.20Nodeftpd
1.3.6.1.4.1.789.1.20.1ScalarftpdOnread-onlycurrentIndicates whether ftpd has been turned on or not.
1.3.6.1.4.1.789.1.20.2ScalarftpdCurrentConnsread-onlycurrentNumber of currently open TCP/IP connections to ftp daemon (active and idle)
1.3.6.1.4.1.789.1.20.3ScalarftpdMaxConnsread-onlycurrentNumber of maximum simultaneous TCP/IP connections to ftp daemon
1.3.6.1.4.1.789.1.20.4ScalarftpdTotalConnsread-onlycurrentNumber of total TCP/IP connections to ftp daemon
1.3.6.1.4.1.789.1.21Nodestorage
1.3.6.1.4.1.789.1.21.1Nodeenclosure
1.3.6.1.4.1.789.1.21.1.1ScalarenclNumberread-onlycurrentThe number of storage enclosures in the storage subsystem.
1.3.6.1.4.1.789.1.21.1.2TableenclTablenot-accessiblecurrentDisplay disk enclosure environmental information for disk shelves that support SCSI Enclosure Services.
1.3.6.1.4.1.789.1.21.1.2.1RowenclEntrynot-accessiblecurrentDisplay disk enclosure (shelf) environmental information for the referenced disk enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.1ColumnenclIndexread-onlycurrentA number that identifies this enclosure among the possible monitored enclosures. This number normally uniquely identifies one shelf within one boot, but may it…
1.3.6.1.4.1.789.1.21.1.2.1.2ColumnenclContactStateread-onlycurrentThe state of the communication between the filer or storage engine and the enclosure monitoring device in the enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.3ColumnenclChannelShelfAddrread-onlycurrentThe adapter number or switch name and the port number (together, called the channel), and shelf ID of this enclosure. Examples are 8a.1 and switch:5.1.
1.3.6.1.4.1.789.1.21.1.2.1.4ColumnenclProductLogicalIDread-onlycurrentThe logical identifier of this enclosure. This a form of the World-Wide Name (WWN).
1.3.6.1.4.1.789.1.21.1.2.1.5ColumnenclProductIDread-onlycurrentThe product ID of the shelf hardware module that provides the enclosure monitoring function. Example is LRC.
1.3.6.1.4.1.789.1.21.1.2.1.6ColumnenclProductVendorread-onlycurrentThe name of the vendor of this enclosure. Example is Xyratex.
1.3.6.1.4.1.789.1.21.1.2.1.7ColumnenclProductModelread-onlycurrentThe model name of this enclosure. Example is DiskShelf14.
1.3.6.1.4.1.789.1.21.1.2.1.8ColumnenclProductRevisionread-onlycurrentThe revision number of this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.9ColumnenclProductSerialNoread-onlycurrentThe serial number of this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.10ColumnenclNumberDiskBaysread-onlycurrentThe number of disk bays in this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.11ColumnenclDisksPresentread-onlycurrentThe list of disks present by bay number in this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.12ColumnenclPowerSuppliesMaximumread-onlycurrentThe maximum number of power supplies in this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.13ColumnenclPowerSuppliesPresentread-onlycurrentThe list of power supplies present in the enclosure. Numbering is from left to right (top supply, then bottom, on each side, if applicable) in their intended l…
1.3.6.1.4.1.789.1.21.1.2.1.14ColumnenclPowerSuppliesSerialNosread-onlycurrentThe list of serial numbers of power supplies present in the enclosure. Not all shelves are able to report the power supply serial number. Communication errors …
1.3.6.1.4.1.789.1.21.1.2.1.15ColumnenclPowerSuppliesFailedread-onlycurrentThe list of failed power supplies in this enclosure, numbered as in enclPowerSuppliesPresent.
1.3.6.1.4.1.789.1.21.1.2.1.16ColumnenclFansMaximumread-onlycurrentThe maximum number of fans or fan modules monitored by this enclosure. R100/R150 shelf power supply fans are not included in this number.
1.3.6.1.4.1.789.1.21.1.2.1.17ColumnenclFansPresentread-onlycurrentThe list of fans or fan modules present and for which status is known in this enclosure. Numbering begins with fans on the front of the enclosure, if applicabl…
1.3.6.1.4.1.789.1.21.1.2.1.18ColumnenclFansFailedread-onlycurrentThe list of failed fans or fan modules in this enclosure. Fans are numbered as described in enclFansPresent.
1.3.6.1.4.1.789.1.21.1.2.1.19ColumnenclTempSensorsMaximumread-onlycurrentThe maximum number of temperature sensors monitored by this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.20ColumnenclTempSensorsPresentread-onlycurrentThe list of temperature sensors present and for which status is known in this enclosure. Temperature sensors are numbered top-to-bottom and left-to-right, begi…
1.3.6.1.4.1.789.1.21.1.2.1.21ColumnenclTempSensorsOverTempFailread-onlycurrentThe list of temperature sensors reporting overtemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.22ColumnenclTempSensorsOverTempWarnread-onlycurrentThe list of temperature sensors reporting overtemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.23ColumnenclTempSensorsUnderTempFailread-onlycurrentThe list of temperature sensors reporting undertemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.24ColumnenclTempSensorsUnderTempWarnread-onlycurrentThe list of temperature sensors reporting undertemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.25ColumnenclTempSensorsCurrentTempread-onlycurrentThe list of temperatures reported by all temperature sensors in the enclosure, including the ambient temperature. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.26ColumnenclTempSensorsOverTempFailThrread-onlycurrentThe list of overtemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.27ColumnenclTempSensorsOverTempWarnThrread-onlycurrentThe list of overtemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.28ColumnenclTempSensorsUnderTempFailThrread-onlycurrentThe list of undertemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.29ColumnenclTempSensorsUnderTempWarnThrread-onlycurrentThe list of undertemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.30ColumnenclElectronicsMaximumread-onlycurrentThe number of enclosure services electronics modules that it is possible for this enclosure to detect and/or monitor.
1.3.6.1.4.1.789.1.21.1.2.1.31ColumnenclElectronicsPresentread-onlycurrentThe list those enclosure services electronics modules present in this enclosure. Numbering is from left-to-right or top-to-bottom in their intended location in…
1.3.6.1.4.1.789.1.21.1.2.1.32ColumnenclElectronicsSerialNosread-onlycurrentThe list of serial numbers of the enclosure services electronics modules present in this enclosure. The order follows that of enclElectronicsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.33ColumnenclElectronicsFailedread-onlycurrentThe list of failed electronics elements. Valid only if enclElectronicsPresent shows that some are present.
1.3.6.1.4.1.789.1.21.1.2.1.34ColumnenclVoltSensorsMaximumread-onlycurrentThe number of voltage sensors monitored by this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.35ColumnenclVoltSensorsPresentread-onlycurrentThe list of voltage sensors present and for which status is known in this enclosure. Voltage sensors are numbered top-to-bottom and left-to-right, as the modul…
1.3.6.1.4.1.789.1.21.1.2.1.36ColumnenclVoltSensorsOverVoltFailread-onlycurrentThe list of voltage sensors reporting overvoltage failure in this enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.37ColumnenclVoltSensorsOverVoltWarnread-onlycurrentThe list of voltage sensors reporting overvoltage warning in this enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.38ColumnenclVoltSensorsUnderVoltFailread-onlycurrentThe list of voltage sensors reporting undervoltage failure in this enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.39ColumnenclVoltSensorsUnderVoltWarnread-onlycurrentThe list of voltage sensors reporting undervoltage warning in this enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.40ColumnenclVoltSensorsCurrentVoltread-onlycurrentThe list of voltages reported by all voltage sensors in the enclosure, Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.41ColumnenclVoltSensorsOverVoltFailThrread-onlycurrentThe list of overvoltage failure thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.42ColumnenclVoltSensorsOverVoltWarnThrread-onlycurrentThe list of overvoltage warning thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.43ColumnenclVoltSensorsUnderVoltFailThrread-onlycurrentThe list of undervoltage failure thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.44ColumnenclVoltSensorsUnderVoltWarnThrread-onlycurrentThe list of undervoltage warning thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.45ColumnenclCurSensorsMaximumread-onlycurrentThe number of current sensors monitored by this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.46ColumnenclCurSensorsPresentread-onlycurrentThe list of current sensors present and for which status is known in this enclosure. Current sensors are numbered top-to-bottom and left-to-right, beginning wi…
1.3.6.1.4.1.789.1.21.1.2.1.47ColumnenclCurSensorsOverCurFailread-onlycurrentThe list of current sensors reporting overcurrent failure in this enclosure. Sensors are numbered as in CurSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.48ColumnenclCurSensorsOverCurWarnread-onlycurrentThe list of current sensors reporting overcurrent warning in this enclosure. Sensors are numbered as in CurSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.49ColumnenclCurSensorsCurrentCurread-onlycurrentThe list of currents reported by all current sensors in the enclosure, Sensors are numbered as in CurSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.50ColumnenclCurSensorsOverCurFailThrread-onlycurrentThe list of overcurrent failure thresholds for all current sensors in the enclosure. Sensors are numbered as in CurSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.51ColumnenclCurSensorsOverCurWarnThrread-onlycurrentThe list of overcurrent warning thresholds for all current sensors in the enclosure. Sensors are numbered as in CurSensorsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.52ColumnenclSASConnectMaximumread-onlycurrentThe number of possible SAS connectors monitored by this enclosure.
1.3.6.1.4.1.789.1.21.1.2.1.53ColumnenclSASConnectPresentread-onlycurrentThe list of SAS connector numbers in this enclosure that have cables attached. Connectors are numbered beginning at one on module one, counting connectors inne…
1.3.6.1.4.1.789.1.21.1.2.1.54ColumnenclSASConnectVendorread-onlycurrentThe list of vendors of cables attached to the SES connectors of the enclosure. If no cable, is attached, the entry is shown as <N/A>.
1.3.6.1.4.1.789.1.21.1.2.1.55ColumnenclSASConnectTyperead-onlycurrentThe list of connector types of connectors attached to the enclosure. If no cable is attached, the entry is shown as <N/A>.
1.3.6.1.4.1.789.1.21.1.2.1.56ColumnenclSASConnectCableLenread-onlycurrentThe list of lengths (in meters) of cables attached to the enclosure. If no cable is attached, the entry is shown as <N/A>.
1.3.6.1.4.1.789.1.21.1.2.1.57ColumnenclSASConnectCableTechread-onlycurrentThe list of cable technologies of connectors attached to the enclosure. If no cable is attached, the entry is shown as <N/A>.
1.3.6.1.4.1.789.1.21.1.2.1.58ColumnenclSASConnectCableEndread-onlycurrentThe list of identifiers of which end of the cable is attached to the enclosure. If no cable is attached, the entry is shown as <N/A>.
1.3.6.1.4.1.789.1.21.1.2.1.59ColumnenclSASConnectSerialNosread-onlycurrentThe list of serial numbers of the SAS cables attached to this enclosure. If no cable is attached, the entry is shown as <N/A>.
1.3.6.1.4.1.789.1.21.1.2.1.60ColumnenclSASConnectPartNosread-onlycurrentThe list of part numbers of the SAS cables attached to this enclosure. If no cable is attached, the entry is shown as <N/A>.
1.3.6.1.4.1.789.1.21.1.2.1.61ColumnenclPowerSuppliesPartNosread-onlycurrentThe list of part numbers of power supplies present in the enclosure. Not all shelves are able to report the power supply part number. Communication errors may …
1.3.6.1.4.1.789.1.21.1.2.1.62ColumnenclFansSpeedread-onlycurrentThe list of fan speeds in revolutions per minute (RPM) for fans or fan modules present and for which speed status is known in this enclosure. Not all enclosure…
1.3.6.1.4.1.789.1.21.1.2.1.63ColumnenclElectronicsPartNosread-onlycurrentThe list of part numbers of the enclosure services electronics modules present in this enclosure. The order follows that of enclElectronicsPresent.
1.3.6.1.4.1.789.1.21.1.2.1.64ColumnenclElectronicsCPLDVersread-onlycurrentThe list of CPLDs ('complex programmable logic devices') of the enclosure services electronics modules present in this enclosure. Not all module types contain …
1.3.6.1.4.1.789.1.21.1.2.1.65ColumnenclNodeNameread-onlycurrentNode to which this enclosure belongs.
1.3.6.1.4.1.789.1.21.2TablehaTablenot-accessiblecurrentHigh Availability configuration information table. This table fields are returned only from the cluster interfaces
1.3.6.1.4.1.789.1.21.2.1RowhaEntrynot-accessiblecurrentHigh Availability Entry
1.3.6.1.4.1.789.1.21.2.1.1ColumnhaNodeNameread-onlycurrentName of the node.
1.3.6.1.4.1.789.1.21.2.1.2ColumnhaNodeSysidread-onlycurrentSystem ID of the node.
1.3.6.1.4.1.789.1.21.2.1.3ColumnhaSettingsread-onlycurrentHigh Availability configuration settings. The value notConfigured(1) indicates that the HA is not licensed. The thisNodeDead(5) setting indicates that this nod…
1.3.6.1.4.1.789.1.21.2.1.4ColumnhaStateread-onlycurrentHigh Availability State.
1.3.6.1.4.1.789.1.21.2.1.5ColumnhaCannotTakeoverCauseread-onlycurrentThe reason node cannot takeover its HA partner
1.3.6.1.4.1.789.1.21.2.1.6ColumnhaPartnerStatusread-onlycurrentThis is the status last returned by its HA partner.
1.3.6.1.4.1.789.1.21.2.1.7ColumnhaPartnerLastStatusUpdateread-onlycurrentIf non-zero, the absolute time of the last update from the partner.
1.3.6.1.4.1.789.1.21.2.1.8ColumnhaPartnerNameread-onlycurrentHostname of partner.
1.3.6.1.4.1.789.1.21.2.1.9ColumnhaPartnerSysidread-onlycurrentSystem ID of partner.
1.3.6.1.4.1.789.1.21.2.1.10ColumnhaInterconnectStatusread-onlycurrentThe current status of the interconnect. The partialFailure(3) status indicates that one of the links in the interconnect hardware is down.
1.3.6.1.4.1.789.1.22Nodenetwork
1.3.6.1.4.1.789.1.22.1NodenetInterfaces
1.3.6.1.4.1.789.1.22.1.1ScalarnetifNumberread-onlycurrentThe number of network interfaces (regardless of their current state) present on this system.
1.3.6.1.4.1.789.1.22.1.2TablenetifTablenot-accessiblecurrentA list of interface entries. The number of entries is given by the value of netifNumber.
1.3.6.1.4.1.789.1.22.1.2.1RownetifEntrynot-accessiblecurrentAn interface entry containing objects at the subnetwork layer and below for a particular interface.
1.3.6.1.4.1.789.1.22.1.2.1.1ColumnnetifIndexread-onlycurrentA unique value for each interface. For clustered Data ONTAP, the high-order 16-bits denote the node identifier and the low-order 16-bits denote the interface i…
1.3.6.1.4.1.789.1.22.1.2.1.2ColumnnetifDescrread-onlycurrentA textual string that contains interface information. For clustered Data ONTAP, the string is in the the following format: <node name>:<interface name> For Dat…
1.3.6.1.4.1.789.1.22.1.2.1.3ColumnifHighInOctetsread-onlydeprecatedThe total number of octets received on the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsigned int…
1.3.6.1.4.1.789.1.22.1.2.1.4ColumnifLowInOctetsread-onlydeprecatedThe total number of octets received on the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsigned in…
1.3.6.1.4.1.789.1.22.1.2.1.5ColumnifHighInUcastPktsread-onlydeprecatedThe number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.…
1.3.6.1.4.1.789.1.22.1.2.1.6ColumnifLowInUcastPktsread-onlydeprecatedThe number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer…
1.3.6.1.4.1.789.1.22.1.2.1.7ColumnifHighInNUcastPktsread-onlydeprecatedThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the most sign…
1.3.6.1.4.1.789.1.22.1.2.1.8ColumnifLowInNUcastPktsread-onlydeprecatedThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the least sig…
1.3.6.1.4.1.789.1.22.1.2.1.9ColumnifHighInDiscardsread-onlydeprecatedThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.789.1.22.1.2.1.10ColumnifLowInDiscardsread-onlydeprecatedThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.789.1.22.1.2.1.11ColumnifHighInErrorsread-onlydeprecatedThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the most significant…
1.3.6.1.4.1.789.1.22.1.2.1.12ColumnifLowInErrorsread-onlydeprecatedThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the least significan…
1.3.6.1.4.1.789.1.22.1.2.1.13ColumnifHighInUnknownProtosread-onlydeprecatedThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the most significant 3…
1.3.6.1.4.1.789.1.22.1.2.1.14ColumnifLowInUnknownProtosread-onlydeprecatedThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the least significant …
1.3.6.1.4.1.789.1.22.1.2.1.15ColumnifHighOutOctetsread-onlydeprecatedThe total number of octets transmitted out of the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsig…
1.3.6.1.4.1.789.1.22.1.2.1.16ColumnifLowOutOctetsread-onlydeprecatedThe total number of octets transmitted out of the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsi…
1.3.6.1.4.1.789.1.22.1.2.1.17ColumnifHighOutUcastPktsread-onlydeprecatedThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.789.1.22.1.2.1.18ColumnifLowOutUcastPktsread-onlydeprecatedThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.789.1.22.1.2.1.19ColumnifHighOutNUcastPktsread-onlydeprecatedThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.4.1.789.1.22.1.2.1.20ColumnifLowOutNUcastPktsread-onlydeprecatedThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.4.1.789.1.22.1.2.1.21ColumnifHighOutDiscardsread-onlydeprecatedThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.789.1.22.1.2.1.22ColumnifLowOutDiscardsread-onlydeprecatedThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.789.1.22.1.2.1.23ColumnifHighOutErrorsread-onlydeprecatedThe number of outbound packets that could not be transmitted because of errors. This object returns the most significant 32 bits of the 64 bit unsigned integer…
1.3.6.1.4.1.789.1.22.1.2.1.24ColumnifLowOutErrorsread-onlydeprecatedThe number of outbound packets that could not be transmitted because of errors. This object returns the least significant 32 bits of the 64 bit unsigned intege…
1.3.6.1.4.1.789.1.22.1.2.1.25Columnif64InOctetsread-onlycurrentThe total number of octets received on the interface, including framing characters. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.22.1.2.1.26Columnif64InUcastPktsread-onlycurrentThe number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.22.1.2.1.27Columnif64InNUcastPktsread-onlycurrentThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns all of the 64…
1.3.6.1.4.1.789.1.22.1.2.1.28Columnif64InDiscardsread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.789.1.22.1.2.1.29Columnif64InErrorsread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns all of the 64 bit un…
1.3.6.1.4.1.789.1.22.1.2.1.30Columnif64InUnknownProtosread-onlycurrentThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns all of the 64 bit unsi…
1.3.6.1.4.1.789.1.22.1.2.1.31Columnif64OutOctetsread-onlycurrentThe total number of octets transmitted out of the interface, including framing characters. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.22.1.2.1.32Columnif64OutUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.789.1.22.1.2.1.33Columnif64OutNUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.4.1.789.1.22.1.2.1.34Columnif64OutDiscardsread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.789.1.22.1.2.1.35Columnif64OutErrorsread-onlycurrentThe number of outbound packets that could not be transmitted because of errors. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.22.2TablenetportTablenot-accessiblecurrentA list of network ports (both physical and logical) on all nodes in the cluster.
1.3.6.1.4.1.789.1.22.2.1RownetportEntrynot-accessiblecurrentNetwork port entry.
1.3.6.1.4.1.789.1.22.2.1.1ColumnnetportNoderead-onlycurrentNode where the port belongs to.
1.3.6.1.4.1.789.1.22.2.1.2ColumnnetportPortread-onlycurrentPort identity.
1.3.6.1.4.1.789.1.22.2.1.3ColumnnetportRoleread-onlycurrentRole of the port. A port must have one of the following roles: cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or undef(0). The cluster port is …
1.3.6.1.4.1.789.1.22.2.1.4ColumnnetportLinkStateread-onlycurrentThe link-state of the port. Normally it is either UP(2) or DOWN(3).
1.3.6.1.4.1.789.1.22.2.1.5ColumnnetportMturead-onlycurrentThe Maximum Transmission Unit (MTU) refers to the size (in bytes) of the largest packet that is supported by the port.
1.3.6.1.4.1.789.1.22.2.1.6ColumnnetportAutonegAdminread-onlycurrentIndicates whether the port's auto-negotiation property is enabled by an administrator.
1.3.6.1.4.1.789.1.22.2.1.7ColumnnetportAutonegOperread-onlycurrentIndicates whether the auto-negotiation is enabled on the port.
1.3.6.1.4.1.789.1.22.2.1.8ColumnnetportDuplexAdminread-onlycurrentThe duplex mode of the port set by the administrator. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3).
1.3.6.1.4.1.789.1.22.2.1.9ColumnnetportDuplexOperread-onlycurrentThe duplex mode appears on the port. It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3).
1.3.6.1.4.1.789.1.22.2.1.10ColumnnetportSpeedAdminread-onlycurrentThe speed of the port set by an administrator. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5).
1.3.6.1.4.1.789.1.22.2.1.11ColumnnetportSpeedOperread-onlycurrentThe speed appears on the port. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5).
1.3.6.1.4.1.789.1.22.2.1.12ColumnnetportSpeedread-onlycurrentThe speed that appears in the port scaled to megabits/sec.
1.3.6.1.4.1.789.1.22.2.1.13ColumnnetportMacread-onlycurrentThe port's MAC address
1.3.6.1.4.1.789.1.22.2.1.14ColumnnetportUpAdminread-onlycurrentIndicates whether the port status is set 'UP' by an administrator.
1.3.6.1.4.1.789.1.22.2.1.15ColumnnetportTyperead-onlycurrentThe type of the port which can be either physical(0), if-group(1), vlan(2) or undef(3).
1.3.6.1.4.1.789.1.22.2.1.16ColumnnetportIfgNoderead-onlycurrentThis field shows the if-group node name if the port type is if-group, It show an empty string, otherwise.
1.3.6.1.4.1.789.1.22.2.1.17ColumnnetportIfgPortread-onlycurrentThis field shows the if-group port if the port type is if-group, It show an empty string, otherwise.
1.3.6.1.4.1.789.1.22.2.1.18ColumnnetportIfgDistrFuncread-onlycurrentIf the port type is if-group, this field shows the distribution function of the port. This function is used to pick the forwarding port for a packet. It can be…
1.3.6.1.4.1.789.1.22.2.1.19ColumnnetportIfgModeread-onlycurrentIf the port type is if-group, this field shows the if-group's policy. It can be either multimode(0), multimode-lacp(1), or single-mode(2). Otherwise, it shows …
1.3.6.1.4.1.789.1.22.2.1.20ColumnnetportVlanNoderead-onlycurrentIf the port type is vlan, this field shows its vlan node. Otherwise, it shows an empty string.
1.3.6.1.4.1.789.1.22.2.1.21ColumnnetportVlanPortread-onlycurrentIf the port type is vlan, this field shows its vlan port. Otherwise, it shows an empty string.
1.3.6.1.4.1.789.1.22.2.1.22ColumnnetportVlanTagread-onlycurrentIf the port type is vlan, this field shows its vlan tag. Otherwise, it shows an empty string.
1.3.6.1.4.1.789.1.22.2.1.23ColumnnetportFlowcontrolAdminread-onlycurrentThe flowcontrol of the port set by an administrator. It can be either undef(0), none(1), receive(2), send(3), or full(4).
1.3.6.1.4.1.789.1.22.2.1.24ColumnnetportFlowcontrolOperread-onlycurrentThe flowcontrol that appears on the port. It can be either undef(0), none(1), receive(2), send(3), or full(4).
1.3.6.1.4.1.789.1.22.2.1.25ColumnnetportAutorevertDelayread-onlycurrentIf the port is designated as a cluster port, this field shows the delay in seconds before auto reverting a LIF to this port. otherwise, it shows an empty strin…
1.3.6.1.4.1.789.1.22.2.1.26ColumnnetportRemoteDeviceIdread-onlycurrentRemote device ID discovered by L2 protocol.
1.3.6.1.4.1.789.1.22.2.1.27ColumnnetportIPspaceread-onlycurrentIPspace where the port is assigned.
1.3.6.1.4.1.789.1.22.2.1.28ColumnnetportBroadcastDomainread-onlycurrentBroadcast Domain of the port is assigned.
1.3.6.1.4.1.789.1.22.2.1.29ColumnnetportMtuAdminread-onlycurrentThe Maximum Transmission Unit (MTU) set by the Administrator (in bytes) of the largest packet that is supported by the port.
1.3.6.1.4.1.789.1.22.2.1.30ColumnnetportHealthStatusread-onlycurrentThe health status of the port.
1.3.6.1.4.1.789.1.22.2.1.31ColumnnetportIgnoreHealthStatusread-onlycurrentThe health overrided status of the port.
1.3.6.1.4.1.789.1.22.2.1.32ColumnnetportDegradedReasonread-onlycurrentThe list of reasons why the port is marked as degraded
1.3.6.1.4.1.789.1.22.3TablenetportIfGrpTablenot-accessiblecurrentA table of if-groups, where each entry represents an interface of the group.
1.3.6.1.4.1.789.1.22.3.1RownetportIfGrpEntrynot-accessiblecurrentIf-group entry.
1.3.6.1.4.1.789.1.22.3.1.1ColumnnetportIfGrpNoderead-onlycurrentThe node that the If-group belongs to.
1.3.6.1.4.1.789.1.22.3.1.2ColumnnetportIfGrpNameread-onlycurrentThe name of the if-group.
1.3.6.1.4.1.789.1.22.3.1.3ColumnnetportIfGrpDistrFuncread-onlycurrentThe distribute function of the if-group. This function is used to pick the forwarding port for a packet. It can be either mac(0), ip(1), or sequential(2). The …
1.3.6.1.4.1.789.1.22.3.1.4ColumnnetportIfGrpModeread-onlycurrentThe policy of the if-group. It can be either multimode(0), multimode-lacp(1), or single-mode(2). The multimode policy uses the static link-aggregation, while t…
1.3.6.1.4.1.789.1.22.3.1.5ColumnnetportIfGrpMacread-onlycurrentThe MAC address of the if-group.
1.3.6.1.4.1.789.1.22.3.1.6ColumnnetportIfGrpActivePortsread-onlycurrentThe participation of the network ports in the if-group. It can be full, partial, and none.
1.3.6.1.4.1.789.1.22.3.1.7ColumnnetportIfGrpPortsread-onlycurrentA list of network ports that participate in the if-group.
1.3.6.1.4.1.789.1.22.3.1.8ColumnnetportIfGrpUpPortsread-onlycurrentA list of network ports that are 'UP' in the if-group.
1.3.6.1.4.1.789.1.22.3.1.9ColumnnetportIfGrpDownPortsread-onlycurrentA list of network ports that are 'DOWN' in the if-group.
1.3.6.1.4.1.789.1.22.4TablelogicalInterfaceTablenot-accessiblecurrentA list of logical interface entries.
1.3.6.1.4.1.789.1.22.4.1RowlogicalInterfaceEntrynot-accessiblecurrentLogical interface entry.
1.3.6.1.4.1.789.1.22.4.1.1ColumnlogicalInterfaceServerread-onlycurrentThe node where the logical interface belongs to.
1.3.6.1.4.1.789.1.22.4.1.2ColumnlogicalInterfaceVifread-onlycurrentThe name of the logical interface.
1.3.6.1.4.1.789.1.22.4.1.3ColumnlogicalInterfaceRoleread-onlycurrentThe role of logical interface. An interface can have one of the following roles: undef(0), cluster(1), data(2), mgmt(3), intercluster(4), and cluster-mgmt(5). …
1.3.6.1.4.1.789.1.22.4.1.4ColumnlogicalInterfaceHomeNoderead-onlycurrentThe home node of the interface where the interface is initially setup.
1.3.6.1.4.1.789.1.22.4.1.5ColumnlogicalInterfaceHomePortread-onlycurrentThe home port of the interface where the interface is initially setup.
1.3.6.1.4.1.789.1.22.4.1.6ColumnlogicalInterfaceCurrNoderead-onlycurrentThe node where the interface is currently on.
1.3.6.1.4.1.789.1.22.4.1.7ColumnlogicalInterfaceCurrPortread-onlycurrentThe port where the interface is currently attached to.
1.3.6.1.4.1.789.1.22.4.1.8ColumnlogicalInterfaceStatusOperread-onlycurrentThe operational status, which can be UP(0) or DOWN(1).
1.3.6.1.4.1.789.1.22.4.1.9ColumnlogicalInterfaceNumericIdread-onlycurrentThe interface ID.
1.3.6.1.4.1.789.1.22.4.1.10ColumnlogicalInterfaceIsHomeread-onlycurrentIndicates whether the interface is at the home node.
1.3.6.1.4.1.789.1.22.4.1.11ColumnlogicalInterfaceAddressread-onlycurrentThe IP address assigned to the interface. This field only displays ipv4 addresses correctly. Ipv6 addresses will display as 0.0.0.0. Refer to the logicalInterf…
1.3.6.1.4.1.789.1.22.4.1.12ColumnlogicalInterfaceNetmaskread-onlycurrentThe netmask assigned to the interface. This field only displays ipv4 netmasks correctly. Ipv6 netmasks will display as 0.0.0.0. Refer to the logicalInterfaceAd…
1.3.6.1.4.1.789.1.22.4.1.13ColumnlogicalInterfaceNetmaskLengthread-onlycurrentThe number of set bits of the netmask.
1.3.6.1.4.1.789.1.22.4.1.14ColumnlogicalInterfaceRoutingGroupread-onlycurrentThe interface's routing group name
1.3.6.1.4.1.789.1.22.4.1.15ColumnlogicalInterfaceStatusAdminread-onlycurrentThe status of the interface assigned by an administrator. It can be either UP(0) or DOWN(1).
1.3.6.1.4.1.789.1.22.4.1.16ColumnlogicalInterfaceFailoverPolicyread-onlycurrentThe interface's failover policy. It can be next-available(0), where the interface will failover to any next available interface, priority(1), where the interfa…
1.3.6.1.4.1.789.1.22.4.1.17ColumnlogicalInterfaceFirewallPolicyread-onlycurrentThe firewall policy of the interface.
1.3.6.1.4.1.789.1.22.4.1.18ColumnlogicalInterfaceAutoRevertread-onlycurrentIndicates whether the auto-revert property of the interface is set. If the value is 'true', the interface will automatically revert back to the home port whene…
1.3.6.1.4.1.789.1.22.4.1.19ColumnlogicalInterfaceStickyread-onlycurrentIndicates whether the sticky bit is set. It is the readonly field that is set by the system. When it is set, the interface's auto-revert is disabled. It is set…
1.3.6.1.4.1.789.1.22.4.1.20ColumnlogicalInterfaceUseFailoverGroupread-onlycurrentThe field identifies whether the interface's failover is system-defined(0), set to 'enabled'(1) or 'disable'(2).
1.3.6.1.4.1.789.1.22.4.1.21ColumnlogicalInterfaceDnsZoneread-onlycurrentThe interface's DNS Zone
1.3.6.1.4.1.789.1.22.4.1.22ColumnlogicalInterfaceAllowLbMigrateread-onlycurrentIndicates whether the load balancing migration is enabled for the interface.
1.3.6.1.4.1.789.1.22.4.1.23ColumnlogicalInterfaceLbWeightread-onlycurrentThe load balancing weight of the interface. It can be either minimum (0), maximum(100), or load(101).
1.3.6.1.4.1.789.1.22.4.1.24ColumnlogicalInterfaceFailoverGroupread-onlycurrentThe interface failover group's name.
1.3.6.1.4.1.789.1.22.4.1.25ColumnlogicalInterfaceStatusVserverread-onlycurrentThe status of the interface with respect to its Vserver. It can be either UP(0) or DOWN(1).
1.3.6.1.4.1.789.1.22.4.1.26ColumnlogicalInterfaceDataProtocolread-onlycurrentA list of data protocols.
1.3.6.1.4.1.789.1.22.4.1.27ColumnlogicalInterfaceFcpWwpnread-onlycurrentThe WWPN of a FCP data LIF.
1.3.6.1.4.1.789.1.22.4.1.28ColumnlogicalInterfaceCommentread-onlycurrentA comment to further identify a LIF.
1.3.6.1.4.1.789.1.22.4.1.29ColumnlogicalInterfaceListenForDnsQueryread-onlycurrentIndicates whether the LIF has to listen for DNS queries for load-balancing.
1.3.6.1.4.1.789.1.22.4.1.30ColumnlogicalInterfaceAddressStringread-onlycurrentThe IP address assigned to the interface. This field displays properly for both ipv4 addresses as well as ipv6 addresses. Format: <ip address>/<netmask length>
1.3.6.1.4.1.789.1.22.5NodenetOpts
1.3.6.1.4.1.789.1.22.5.1NodenetOptsv6Table
1.3.6.1.4.1.789.1.22.5.1.1ScalarnetOptsv6Enabledread-onlycurrentIndicates whether the cluster supports IPv6.
1.3.6.1.4.1.789.1.22.5.1.2ScalarnetOptsv6RAProcEnabledread-onlycurrentIndicates whether the cluster supports IPv6 Router Advertisement Processing.
1.3.6.1.4.1.789.1.22.5.2NodenetOptsSwitchlessCluster
1.3.6.1.4.1.789.1.22.5.2.1ScalarnetOptsSwitchlessClusterEnabledread-onlycurrentIndicates whether the cluster network is switchless.
1.3.6.1.4.1.789.1.22.6TableipspaceTablenot-accessiblecurrentA table of IPspaces, where each entry represents an IPspace.
1.3.6.1.4.1.789.1.22.6.1RowipspaceEntrynot-accessiblecurrentIPspace entry.
1.3.6.1.4.1.789.1.22.6.1.1ColumnipspaceNameread-onlycurrentThe IPspace name.
1.3.6.1.4.1.789.1.22.6.1.2ColumnipspaceIDread-onlycurrentThe Identifier of the IPspace.
1.3.6.1.4.1.789.1.22.6.1.3ColumnipspacePortsread-onlycurrentThe network ports assigned to the IPspace of the form {node1:port1},{node2:port2}.
1.3.6.1.4.1.789.1.22.6.1.4ColumnipspaceBroadcastDomainsread-onlycurrentThe broadcast domains for the IPspace.
1.3.6.1.4.1.789.1.22.6.1.5ColumnipspaceVserversread-onlycurrentThe vservers assigned to the IPspace of the form {vs1,vs2}.
1.3.6.1.4.1.789.1.22.7TablevsRouteTablenot-accessiblecurrentA table of vserver routes, where each entry represents a vserver route.
1.3.6.1.4.1.789.1.22.7.1RowvsRouteEntrynot-accessiblecurrentVsroutes entry.
1.3.6.1.4.1.789.1.22.7.1.1ColumnvsRouteVserverIDread-onlycurrentThe vserver of the vserver route.
1.3.6.1.4.1.789.1.22.7.1.2ColumnvsRouteUuidread-onlycurrentThe Uuid of the vserver route.
1.3.6.1.4.1.789.1.22.7.1.3ColumnvsRouteDestinationread-onlycurrentThe destination of the vserver route.
1.3.6.1.4.1.789.1.22.7.1.4ColumnvsRouteGatewayread-onlycurrentThe gateway of the vserver route.
1.3.6.1.4.1.789.1.22.7.1.5ColumnvsRouteMetricread-onlycurrentThe metric of the vserver route.
1.3.6.1.4.1.789.1.22.7.1.6ColumnvsRouteAddressFamilyread-onlycurrentThe address family of the vserver route.
1.3.6.1.4.1.789.1.22.8TablevsFailoverGroupTablenot-accessiblecurrentA table of logical interface failover groups, where each entry represents a logical interface failover group.
1.3.6.1.4.1.789.1.22.8.1RowvsFailoverGroupEntrynot-accessiblecurrentVsFailoverGroup entry.
1.3.6.1.4.1.789.1.22.8.1.1ColumnvsFailoverGroupVserverIDread-onlycurrentThe vserver of the failover group.
1.3.6.1.4.1.789.1.22.8.1.2ColumnvsFailoverGroupNameread-onlycurrentThe name of the failover group.
1.3.6.1.4.1.789.1.22.8.1.3ColumnvsFailoverGroupTargetsread-onlycurrentThe failover targets of the failover group.
1.3.6.1.4.1.789.1.22.9TablevsFirewallPolicyTablenot-accessiblecurrentA table of firewall policies, where each entry represents a firewall policy.
1.3.6.1.4.1.789.1.22.9.1RowvsFirewallPolicyEntrynot-accessiblecurrentVsfailovergroups entry.
1.3.6.1.4.1.789.1.22.9.1.1ColumnvsFirewallPolicyVserverIDread-onlycurrentThe vserver on which this firewall policy is defined.
1.3.6.1.4.1.789.1.22.9.1.2ColumnvsFirewallPolicyUuidread-onlycurrentThe unique identifier for this firewall policy.
1.3.6.1.4.1.789.1.22.9.1.3ColumnvsFirewallPolicyNameread-onlycurrentThe name of this firewall policy.
1.3.6.1.4.1.789.1.22.9.1.4ColumnvsFirewallPolicyServiceread-onlycurrentThe service that this firewall policy is restricting access to.
1.3.6.1.4.1.789.1.22.9.1.5ColumnvsFirewallPolicyAllowListread-onlycurrentThe list of source IPs that are allowed to access the underlying service of this firewall policy.
1.3.6.1.4.1.789.1.22.10TablebroadcastDomainTablenot-accessiblecurrentA table of broadcast domains, where each entry represents a broadcast domain.
1.3.6.1.4.1.789.1.22.10.1RowbroadcastDomainEntrynot-accessiblecurrentBroadcast domain entry.
1.3.6.1.4.1.789.1.22.10.1.1ColumnbroadcastDomainIpspaceNameread-onlycurrentThe IPspace name.
1.3.6.1.4.1.789.1.22.10.1.2ColumnbroadcastDomainNameread-onlycurrentThe broadcast domain name.
1.3.6.1.4.1.789.1.22.10.1.3ColumnbroadcastDomainMTUread-onlycurrentMTU of the broadcast domain.
1.3.6.1.4.1.789.1.22.10.1.4ColumnbroadcastDomainPortsread-onlycurrentThe network ports assigned to the broadcast domain of the form {node1:port1},{node2:port2}.
1.3.6.1.4.1.789.1.22.10.1.5ColumnbroadcastDomainFailoverGroupsread-onlycurrentThe failover groups for the broadcast domain of the form {fg1,fg2}.
1.3.6.1.4.1.789.1.22.10.1.6ColumnbroadcastDomainSubnetsread-onlycurrentThe subnets associated with this broadcast domain.
1.3.6.1.4.1.789.1.22.11TablesubnetTablenot-accessiblecurrentA table of Subnets, where each entry represents a Subnet.
1.3.6.1.4.1.789.1.22.11.1RowsubnetEntrynot-accessiblecurrentSubnet entry.
1.3.6.1.4.1.789.1.22.11.1.1ColumnsubnetIpspaceNameread-onlycurrentThe IPspace name.
1.3.6.1.4.1.789.1.22.11.1.2ColumnsubnetBroadcastDomainNameread-onlycurrentThe broadcast domain name.
1.3.6.1.4.1.789.1.22.11.1.3ColumnsubnetNameread-onlycurrentThe Subnet name.
1.3.6.1.4.1.789.1.22.11.1.4ColumnsubnetMaskread-onlycurrentSubnet IP and Mask.
1.3.6.1.4.1.789.1.22.11.1.5ColumnsubnetGatewayread-onlycurrentSubnet Gateway IP.
1.3.6.1.4.1.789.1.22.11.1.6ColumnsubnetIpRangesread-onlycurrentSubnet IP Ranges.
1.3.6.1.4.1.789.1.22.11.1.7ColumnsubnetTotalCountread-onlycurrentTotal address count for all ranges.
1.3.6.1.4.1.789.1.22.11.1.8ColumnsubnetUsedCountread-onlycurrentUsed address count for all ranges.
1.3.6.1.4.1.789.1.22.11.1.9ColumnsubnetAvailableCountread-onlycurrentAvailable address count for all ranges.
1.3.6.1.4.1.789.1.23Nodesis
1.3.6.1.4.1.789.1.23.1ScalarsisIsLicensedread-onlycurrentIndicates whether Advanced SIS is licensed on the filer.
1.3.6.1.4.1.789.1.23.2TablesisTablenot-accessiblecurrentProvide a list of the SIS volumes on the system.
1.3.6.1.4.1.789.1.23.2.1RowsisEntrynot-accessiblecurrentProvide details about a particular SIS volume. For entries returned only from the cluster interfaces, the value of sisRowAvailable needs to be 1, for the conte…
1.3.6.1.4.1.789.1.23.2.1.1ColumnsisIndexread-onlycurrentA number that identifies this entry for the SIS volume.
1.3.6.1.4.1.789.1.23.2.1.2ColumnsisPathread-onlycurrentThe path to the SIS volume.
1.3.6.1.4.1.789.1.23.2.1.3ColumnsisStateread-onlycurrentIndicates whether SIS is enabled on the volume or not.
1.3.6.1.4.1.789.1.23.2.1.4ColumnsisStatusread-onlycurrentCurrent status of the SIS volume.
1.3.6.1.4.1.789.1.23.2.1.5ColumnsisProgressread-onlycurrentThe progress of the current SIS operation.
1.3.6.1.4.1.789.1.23.2.1.6ColumnsisTyperead-onlycurrentIndicates whether it is a regular or snapvaulted SIS volume.
1.3.6.1.4.1.789.1.23.2.1.7ColumnsisScheduleread-onlycurrentThe schedule for the SIS operations.
1.3.6.1.4.1.789.1.23.2.1.8ColumnsisLastOpBeginTimeread-onlycurrentThe starting time of the last completed SIS operation.
1.3.6.1.4.1.789.1.23.2.1.9ColumnsisLastOpEndTimeread-onlycurrentThe ending time of the last completed SIS operation.
1.3.6.1.4.1.789.1.23.2.1.10ColumnsisHighLastOpSizeread-onlydeprecatedThe total amount of data in KBytes that the last completed SIS operation had processed. This object returns the most significant 32 bits of the 64 bit unsigned…
1.3.6.1.4.1.789.1.23.2.1.11ColumnsisLowLastOpSizeread-onlydeprecatedThe total amount of data in KBytes that the last completed SIS operation had processed. This object returns the least significant 32 bits of the 64 bit unsigne…
1.3.6.1.4.1.789.1.23.2.1.12ColumnsisLastOpErrorread-onlycurrentThe error that the last SIS operation encountered if it failed.
1.3.6.1.4.1.789.1.23.2.1.13Columnsis64LastOpSizeread-onlycurrentThe total amount of data in KBytes that the last completed SIS operation had processed. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.23.2.1.14ColumnsisIsCompressionEnabledread-onlycurrentIndicates whether background compression is enabled on the volume or not.
1.3.6.1.4.1.789.1.23.2.1.15ColumnsisIsInlineEnabledread-onlycurrentIndicates whether inline compression is enabled on the volume or not
1.3.6.1.4.1.789.1.23.2.1.16ColumnsisVserverread-onlycurrentVserver owning the Storage efficiency volume. This entry is only available from the cluster interface.
1.3.6.1.4.1.789.1.23.2.1.17ColumnsisPolicyread-onlycurrentStorage efficiency policy name set on the volume. This entry is only available from the cluster interface.
1.3.6.1.4.1.789.1.23.2.1.18ColumnsisRowAvailableread-onlycurrentIndicates if other fields in this entry are available. This field is returned only from the cluster interfaces. If something goes wrong while fetching the valu…
1.3.6.1.4.1.789.1.23.2.1.19ColumnsisMinBlocksSharedread-onlycurrentThe minimum number of contiguous blocks in a file that will be considered for block sharing. If the number of contiguous duplicate blocks is less than this num…
1.3.6.1.4.1.789.1.23.2.1.20ColumnsisBlocksSkippedSharingread-onlycurrentNumber of blocks not considered for sharing because contiguous duplicate blocks were less than the value set for sisMinBlocksShared.
1.3.6.1.4.1.789.1.23.2.1.21ColumnsisChangelogUsedPercentread-onlycurrentPercentage of changelog used.
1.3.6.1.4.1.789.1.23.2.1.22ColumnsisLastSuccessfulOpBeginTimeread-onlycurrentThe starting time of the last successful SIS operation.
1.3.6.1.4.1.789.1.23.2.1.23ColumnsisLastSuccessfulOpEndTimeread-onlycurrentThe ending time of the last successful SIS operation.
1.3.6.1.4.1.789.1.23.2.1.24ColumnsisLastOpStateread-onlycurrentThe state of the last SIS operation.
1.3.6.1.4.1.789.1.23.2.1.25ColumnsisLogicalSizeread-onlycurrentThe size of logical data in the volume in bytes. This may be calculated approximately using these fields in dfTable MIB [df64DedupeSaved + df64CompressSaved + …
1.3.6.1.4.1.789.1.23.2.1.26ColumnsisLogicalLimitread-onlycurrentIndicates SIS logical limit for the volume. It is equal to WAFL maximum nominal size of 64bit volume.
1.3.6.1.4.1.789.1.23.2.1.27ColumnsisQueuedJobread-onlycurrentIndicates type of sis operation that is queued for the volume. Possible values: 'scan', 'start', 'check', 'downgrade'.
1.3.6.1.4.1.789.1.23.2.1.28ColumnsisStaleFpPercentageread-onlycurrentIndicates percentage of fingerprints that are stale in the fingerprint database. It can be more than 100%, if blocks are overwritten or deleted.
1.3.6.1.4.1.789.1.23.2.1.29ColumnsisIsIddEnabledread-onlycurrentIndicates Incompressible data detection is enabled on compressed volume.
1.3.6.1.4.1.789.1.23.2.1.30ColumnsisQuickCheckFsizeread-onlycurrentCompression quick check file size. If Incompressible data detection is enabled and if the file size is >= quick-check-fsize, inline compression will do a 4k qu…
1.3.6.1.4.1.789.1.23.2.1.31ColumnsisIsConstituentread-onlycurrentIndicates whether the volume is a constituent or not.
1.3.6.1.4.1.789.1.23.2.1.32ColumnsisIsInlineDedupeEnabledread-onlycurrentIndicates whether inline dedupe is enabled on the volume or not
1.3.6.1.4.1.789.1.23.2.1.33ColumnsisIsCrossVolumeInlineDedupeEnabledread-onlycurrentIndicates whether cross volume inline deduplication is enabled on the volume or not
1.3.6.1.4.1.789.1.23.2.1.34ColumnsisIsCrossVolumeBackgroundDedupeEnabledread-onlycurrentIndicates whether cross volume background deduplication is enabled on the volume or not
1.3.6.1.4.1.789.1.23.2.1.35ColumnsisIsDataCompactionEnabledread-onlycurrentIndicates whether data compaction is enabled on the volume or not
1.3.6.1.4.1.789.1.23.2.1.36ColumnsisApplicationIOSizeread-onlycurrentIndicates the Application IO Size used for compression.
1.3.6.1.4.1.789.1.23.2.1.37ColumnsisCompressionTyperead-onlycurrentIndicates the Compression Type used by the volume.
1.3.6.1.4.1.789.1.23.2.1.38ColumnsisHasExtendedCompressedDataread-onlycurrentIndicates whether the volume has data compressed in extended compression format or not
1.3.6.1.4.1.789.1.24Nodecompress
1.3.6.1.4.1.789.1.24.1ScalarcompressIsLicensedread-onlydeprecatedIndicates whether compression is licensed on the filer.
1.3.6.1.4.1.789.1.24.2TablecompressTablenot-accessibledeprecatedProvide a report of the total space used as well as the space saved by compression on volumes.
1.3.6.1.4.1.789.1.24.2.1RowcompressEntrynot-accessibledeprecatedProvide a report of the total space used as well as the space saved by compression on the referenced file system.
1.3.6.1.4.1.789.1.24.2.1.1ColumncompressIndexread-onlydeprecatedA number that identifies this entry for the referenced file system.
1.3.6.1.4.1.789.1.24.2.1.2ColumncompressFileSysread-onlydeprecatedThe name for the referenced file system.
1.3.6.1.4.1.789.1.24.2.1.3ColumncompressHighUsedKBytesread-onlydeprecatedThe total disk space in KBytes that is in use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer. T…
1.3.6.1.4.1.789.1.24.2.1.4ColumncompressLowUsedKBytesread-onlydeprecatedThe total disk space in KBytes that is in use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer. …
1.3.6.1.4.1.789.1.24.2.1.5Columncompress64UsedKBytesread-onlydeprecatedThe total disk space in KBytes that is in use on the referenced file system. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.24.2.1.6ColumncompressHighSavedKBytesread-onlydeprecatedThe disk space in KBytes of disk space that is saved by compression on the referenced file system. This object returns the most significant 32 bits of the 64 b…
1.3.6.1.4.1.789.1.24.2.1.7ColumncompressLowSavedKBytesread-onlydeprecatedThe disk space in KBytes of disk space that is saved by compression on the referenced filesystem. This object returns the least significant 32 bits of the 64 b…
1.3.6.1.4.1.789.1.24.2.1.8Columncompress64SavedKBytesread-onlydeprecatedThe disk space in KBytes of disk space that is saved by compression on the referenced filesystem. This object returns all of the 64 bit unsigned integer.
1.3.6.1.4.1.789.1.24.2.1.9ColumncompressPercentSavedread-onlydeprecatedThe percentage of disk space saved by compression on the referenced filesystem.
1.3.6.1.4.1.789.1.25Nodecluster
1.3.6.1.4.1.789.1.25.1NodeclusterIdentity
1.3.6.1.4.1.789.1.25.1.1ScalarclusterIdentityUuidread-onlycurrentCluster's universally unique identifier (UUID).
1.3.6.1.4.1.789.1.25.1.2ScalarclusterIdentityNameread-onlycurrentName of the cluster of which this node is a member.
1.3.6.1.4.1.789.1.25.1.3ScalarclusterIdentitySerialNumberread-onlycurrentCluster Serial Number
1.3.6.1.4.1.789.1.25.2TablenodeTablenot-accessiblecurrentTable of all nodes in the cluster.
1.3.6.1.4.1.789.1.25.2.1RownodeEntrynot-accessiblecurrentEntry for a node in the cluster.
1.3.6.1.4.1.789.1.25.2.1.1ColumnnodeNameread-onlycurrentNode Name. Same as sysName for a specific node.
1.3.6.1.4.1.789.1.25.2.1.2ColumnnodeOwnerread-onlycurrentNode Owner. Same as sysContact for a specific node.
1.3.6.1.4.1.789.1.25.2.1.3ColumnnodeLocationread-onlycurrentNode Location. Same as sysLocation for a specific node.
1.3.6.1.4.1.789.1.25.2.1.4ColumnnodeModelread-onlycurrentNode Model. Same as productModel for a specific node.
1.3.6.1.4.1.789.1.25.2.1.5ColumnnodeSerialNumberread-onlycurrentNode Serial Number. Same as productSerialNum for a specific node.
1.3.6.1.4.1.789.1.25.2.1.6ColumnnodeAssetTagread-onlycurrentValue of customer-assigned asset tag for this node.
1.3.6.1.4.1.789.1.25.2.1.7ColumnnodeUptimeread-onlycurrentNode Uptime. Same as sysUpTime for a specific node.
1.3.6.1.4.1.789.1.25.2.1.8ColumnnodeNvramIdread-onlycurrentNVRAM ID of this node.
1.3.6.1.4.1.789.1.25.2.1.9ColumnnodeSystemIdread-onlycurrentNode System ID. Same as productId for a specific node.
1.3.6.1.4.1.789.1.25.2.1.10ColumnnodeVendorread-onlycurrentNode Vendor. Similar to productVendor for a specific node.
1.3.6.1.4.1.789.1.25.2.1.11ColumnnodeHealthread-onlycurrentWhether or not the node can communicate with the cluster.
1.3.6.1.4.1.789.1.25.2.1.12ColumnnodeEligibilityread-onlycurrentAn eligible node is one that has been designated by the administrator as an active participant in the cluster.
1.3.6.1.4.1.789.1.25.2.1.13ColumnnodeEpsilonread-onlycurrentWhether or not this node has epsilon to keep the quorum up if only half of the nodes can communicate.
1.3.6.1.4.1.789.1.25.2.1.14ColumnnodeUuidread-onlycurrentUniversally unique identifier (UUID) of the node.
1.3.6.1.4.1.789.1.25.2.1.15ColumnnodeCpuUptimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been up since the last boot.
1.3.6.1.4.1.789.1.25.2.1.16ColumnnodeCpuBusyTimeread-onlycurrentThe time (in hundredths of a second) that the CPU has been doing useful work since the last boot.
1.3.6.1.4.1.789.1.25.2.1.17ColumnnodeNvramBatteryStatusread-onlycurrentAn indication of the current status of the NVRAM battery or batteries. Batteries which are fully or partially discharged may not fully protect the system durin…
1.3.6.1.4.1.789.1.25.2.1.18ColumnnodeEnvOverTemperatureread-onlycurrentAn indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceed…
1.3.6.1.4.1.789.1.25.2.1.19ColumnnodeEnvFailedFanCountread-onlycurrentCount of the number of chassis fans which are not operating within the recommended RPM range.
1.3.6.1.4.1.789.1.25.2.1.20ColumnnodeEnvFailedFanMessageread-onlycurrentText message describing the current condition of chassis fans. This is useful only if envFailedFanCount is not zero.
1.3.6.1.4.1.789.1.25.2.1.21ColumnnodeEnvFailedPowerSupplyCountread-onlycurrentCount of the number of power supplies which are in degraded mode.
1.3.6.1.4.1.789.1.25.2.1.22ColumnnodeEnvFailedPowerSupplyMessageread-onlycurrentText message describing the state of any power supplies which are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.
1.3.6.1.4.1.789.1.25.2.1.23ColumnnodeProductVersionread-onlycurrentNode Product Version. Similar to productVersion for a specific node.
1.3.6.1.4.1.789.1.25.2.1.24ColumnnodeFirmwareVersionread-onlycurrentNode Firmware Version. Similar to productFirmwareVersion for a specific node.
1.3.6.1.4.1.789.1.25.3TableclusterLicenseTablenot-accessibleobsoleteCluster Licenses
1.3.6.1.4.1.789.1.25.3.1RowclusterLicenseEntrynot-accessibleobsoleteDetails about each installed cluster license.
1.3.6.1.4.1.789.1.25.3.1.1ColumnclusterLicenseFeatureread-onlyobsoleteCluster license feature ID, see clusterLicenseDescription for the name/description of this feature
1.3.6.1.4.1.789.1.25.3.1.2ColumnclusterLicenseCoderead-onlyobsoleteCluster License Code
1.3.6.1.4.1.789.1.25.3.1.3ColumnclusterLicenseDescriptionread-onlyobsoleteCluster License Feature Description
1.3.6.1.4.1.789.1.25.3.1.4ColumnclusterLicenseSerialNumberread-onlyobsoleteCluster Serial Number
1.3.6.1.4.1.789.1.25.3.1.5ColumnclusterLicenseLimitread-onlyobsoleteCluster feature limit value. The units of this value are feature specific, for example number of nodes, capacity in TB, number of streams, etc. Information abo…
1.3.6.1.4.1.789.1.25.3.1.6ColumnclusterLicenseExpirationDateread-onlyobsoleteCluster License Expiration Date if it exists
1.3.6.1.4.1.789.1.25.4TablelicenseTablenot-accessiblecurrentLicenses
1.3.6.1.4.1.789.1.25.4.1RowlicenseEntrynot-accessiblecurrentDetails about each installed license.
1.3.6.1.4.1.789.1.25.4.1.1ColumnlicenseSerialNumberread-onlycurrentLicense Serial Number
1.3.6.1.4.1.789.1.25.4.1.2ColumnlicensePackageread-onlycurrentLicense package ID, see licenseDescription for the name/description of this package
1.3.6.1.4.1.789.1.25.4.1.3ColumnlicenseOwnerread-onlycurrentName of the Node or Cluster that the license belongs to
1.3.6.1.4.1.789.1.25.4.1.4ColumnlicenseDescriptionread-onlycurrentLicense Package Description
1.3.6.1.4.1.789.1.25.4.1.5ColumnlicenseTyperead-onlycurrentLicense Type
1.3.6.1.4.1.789.1.25.4.1.6ColumnlicenseExpirationread-onlycurrentLicense Expiration Date if it exists
1.3.6.1.4.1.789.1.25.4.1.7ColumnlicenseLegacyread-onlycurrentIndicates if the license is a Legacy License
1.3.6.1.4.1.789.1.25.4.1.8ColumnlicenseCustomerIDread-onlycurrentCustomer Identification Number, if exists
1.3.6.1.4.1.789.1.26Nodeextcache
1.3.6.1.4.1.789.1.26.1ScalarextcacheTyperead-onlycurrentIndicates the type of external cache being used. Examples are none, PCS, IOMEM.
1.3.6.1.4.1.789.1.26.2ScalarextcacheSubTyperead-onlycurrentIndicates the sub-type of external cache being used. Examples are none, PAM1, PAM2.
1.3.6.1.4.1.789.1.26.3Scalarextcache64Uptimeread-onlycurrentIndicates the uptime of the external cache.
1.3.6.1.4.1.789.1.26.4Scalarextcache64Sizeread-onlycurrentIndicates size of the external cache in bytes.
1.3.6.1.4.1.789.1.26.5Scalarextcache64Usedsizeread-onlycurrentIndicates number of bytes used in the external cache.
1.3.6.1.4.1.789.1.26.6Scalarextcache64TotalBuffersread-onlycurrentIndicates total number of 4k blocks in the external cache.
1.3.6.1.4.1.789.1.26.7ScalarextcacheOptionsread-onlycurrentIndicates external cache options that are currently turned on.
1.3.6.1.4.1.789.1.26.8Scalarextcache64Hitsread-onlycurrentIndicates number of wafl buffers read from the external cache
1.3.6.1.4.1.789.1.26.9Scalarextcache64Missesread-onlycurrentIndicates the number of external cache misses
1.3.6.1.4.1.789.1.26.10Scalarextcache64Insertsread-onlycurrentIndicates number of wafl buffers inserted into the external cache
1.3.6.1.4.1.789.1.26.11Scalarextcache64Evictsread-onlycurrentIndicates the number of buffers evicted from the external cache
1.3.6.1.4.1.789.1.26.12Scalarextcache64Invalidatesread-onlycurrentIndicates the number of buffers invalidated in the external cache
1.3.6.1.4.1.789.1.26.13Scalarextcache64BlocksRef0read-onlycurrentIndicates the number of non-referenced buffers currently in the external cache
1.3.6.1.4.1.789.1.26.14Scalarextcache64HitNormalL0read-onlycurrentIndicates the number of L0 buffers read from the external cache
1.3.6.1.4.1.789.1.26.15Scalarextcache64MetaDataread-onlycurrentIndicates the number of metadata buffers read from the external cache
1.3.6.1.4.1.789.1.26.16Scalarextcache64ReadLatencyread-onlycurrentIndicates the average latency of read IOs in the external cache in milliseconds
1.3.6.1.4.1.789.1.26.17Scalarextcache64WriteLatencyread-onlycurrentIndicates the average latency of write IOs in the external cache in milliseconds
1.3.6.1.4.1.789.1.26.18Scalarextcache64RCLengthread-onlycurrentIndicates the average read chain length in the external cache
1.3.6.1.4.1.789.1.26.19Scalarextcache64WCLengthread-onlycurrentIndicates the average write chain length in the external cache
1.3.6.1.4.1.789.1.26.20ScalarextcacheIsFlexShareOnread-onlycurrentIndicates whether FlexShare is on
1.3.6.1.4.1.789.1.27Nodevserver
1.3.6.1.4.1.789.1.27.1TablevserverTablenot-accessiblecurrentVirtual Server Table
1.3.6.1.4.1.789.1.27.1.1RowvserverEntrynot-accessiblecurrentVirtual Server Entry
1.3.6.1.4.1.789.1.27.1.1.1ColumnvserverIndexnot-accessiblecurrentIndex of virtual server.
1.3.6.1.4.1.789.1.27.1.1.2ColumnvserverNameread-onlycurrentName of virtual server.
1.3.6.1.4.1.789.1.27.1.1.3ColumnvserverUuidread-onlycurrentUniversally unique identifier (UUID) of virtual server.
1.3.6.1.4.1.789.1.27.1.1.4ColumnvserverRootVolumeread-onlycurrentVirtual server's root volume
1.3.6.1.4.1.789.1.27.1.1.5ColumnvserverAggregateread-onlycurrentName of aggregate the vserver's root volume is in.
1.3.6.1.4.1.789.1.27.1.1.6ColumnvserverNsSwitchread-onlycurrentVserver Name Service Switch setting (eg: nis, ldap, file).
1.3.6.1.4.1.789.1.27.1.1.7ColumnvserverNisDomainread-onlycurrentVserver NIS Domain
1.3.6.1.4.1.789.1.27.1.1.8ColumnvserverRootVolumeSecurityStyleread-onlycurrentVserver Root Volume Security Style
1.3.6.1.4.1.789.1.27.1.1.9ColumnvserverLdapClientread-onlycurrentVserver LDAP Client
1.3.6.1.4.1.789.1.27.1.1.10ColumnvserverLanguageread-onlycurrentLanguage of this vserver's volumes. For example, 'English'
1.3.6.1.4.1.789.1.27.1.1.11ColumnvserverSnapshotPolicyread-onlycurrentVserver Default Snapshot Policy
1.3.6.1.4.1.789.1.27.1.1.12ColumnvserverCommentread-onlycurrentCustomer assigned comment for this vserver
1.3.6.1.4.1.789.1.27.1.1.13ColumnvserverAntiVirusOnAccessPolicyread-onlydeprecatedVserver Default Anti-Virus On-Access Policy
1.3.6.1.4.1.789.1.27.1.1.14ColumnvserverQuotaPolicyread-onlycurrentQuota Policy assigned for all volumes in this vserver
1.3.6.1.4.1.789.1.27.1.1.15ColumnvserverTyperead-onlycurrentType of the vserver. There are four distinct supported types: data, admin, node and system. 'data' vservers are the default scale-out vservers. One 'admin' vse…
1.3.6.1.4.1.789.1.27.1.1.16ColumnvserverStateread-onlycurrentState of the vserver
1.3.6.1.4.1.789.1.27.1.1.17ColumnvserverAggrListread-onlycurrentThis is a comma-separated list of aggregates on which the Vserver can perform volume operations. The aggregates may be shared for use with other Vservers.
1.3.6.1.4.1.789.1.27.1.1.18ColumnvserverAllowedProtocolListread-onlycurrentThis is a comma-separated list of protocols/services allowed to run on the Vserver. Eg: NFS,CIFS,iSCSI,FCP.
1.3.6.1.4.1.789.1.27.1.1.19ColumnvserverNumVolumesread-onlycurrentNumber of volumes that are contained in the Vserver.
1.3.6.1.4.1.789.1.27.1.1.20ColumnvserverMaxVolumesread-onlycurrentMaximum number of volumes that can be created on the Vserver. A value of 4294967295 indicates there is no limit on the number of volumes that can be created on…
1.3.6.1.4.1.789.1.27.1.1.21ColumnvserverDisallowedProtocolListread-onlycurrentThis is a comma-separated list of protocols/services disallowed to run on the Vserver. Eg: NFS,CIFS,iSCSI,FCP.
1.3.6.1.4.1.789.1.27.1.1.22ColumnvserverIPspaceread-onlycurrentIPspace where the Vserver is assigned.
1.3.6.1.4.1.789.1.27.1.1.23ColumnvserverIsRepositoryread-onlycurrentThis parameter defines if this is a Vserver with Infinite Volume. A Vserver with Infinite Volume contains a single Infinite Volume.
1.3.6.1.4.1.789.1.27.1.1.24ColumnvserverOperationalStateread-onlycurrentOperational State of the vserver
1.3.6.1.4.1.789.1.28Nodeqos
1.3.6.1.4.1.789.1.28.1TableqosWorkloadTablenot-accessiblecurrentQoS Workload Table.
1.3.6.1.4.1.789.1.28.1.1RowqosWorkloadEntrynot-accessiblecurrentEntry for a QoS Workload.
1.3.6.1.4.1.789.1.28.1.1.1ColumnqosWorkloadUuidread-onlycurrentWorkload Uuid
1.3.6.1.4.1.789.1.28.1.1.2ColumnqosWorkloadNameread-onlycurrentWorkload Name
1.3.6.1.4.1.789.1.28.1.1.3ColumnqosWorkloadClassread-onlycurrentWorkload Class
1.3.6.1.4.1.789.1.28.1.1.4ColumnqosWorkloadIdread-onlycurrentWorkload ID
1.3.6.1.4.1.789.1.28.1.1.5ColumnqosWorkloadPolicyGroupread-onlycurrentPolicy Group Uuid
1.3.6.1.4.1.789.1.28.1.1.6ColumnqosWorkloadVserverread-onlycurrentVserver ID
1.3.6.1.4.1.789.1.28.1.1.7ColumnqosWorkloadVolumeread-onlycurrentVolume Name
1.3.6.1.4.1.789.1.28.1.1.8ColumnqosWorkloadLunread-onlycurrentLUN Name
1.3.6.1.4.1.789.1.28.1.1.9ColumnqosWorkloadFileread-onlycurrentFilename
1.3.6.1.4.1.789.1.28.1.1.10ColumnqosWorkloadQtreeread-onlycurrentQtree
1.3.6.1.4.1.789.1.28.1.1.11ColumnqosWorkloadReadAheadread-onlycurrentReadahead Tunables
1.3.6.1.4.1.789.1.28.1.1.12ColumnqosWorkloadCacheread-onlycurrentExt Cache Tunables
1.3.6.1.4.1.789.1.28.1.1.13ColumnqosWorkloadMinThroughputread-onlycurrentMinimum Throughput
1.3.6.1.4.1.789.1.28.1.1.14ColumnqosWorkloadMaxThroughputread-onlycurrentMaximum Throughput
1.3.6.1.4.1.789.1.28.2TableqosPolicyGroupTablenot-accessiblecurrentQoS Policy Group Table.
1.3.6.1.4.1.789.1.28.2.1RowqosPolicyGroupEntrynot-accessiblecurrentEntry for a QoS Policy Group.
1.3.6.1.4.1.789.1.28.2.1.1ColumnqosPolicyGroupUuidread-onlycurrentPolicy Group Uuid
1.3.6.1.4.1.789.1.28.2.1.2ColumnqosPolicyGroupNameread-onlycurrentPolicy Group Name
1.3.6.1.4.1.789.1.28.2.1.3ColumnqosPolicyGroupPgidread-onlycurrentPolicy Group ID
1.3.6.1.4.1.789.1.28.2.1.4ColumnqosPolicyGroupClassread-onlycurrentPolicy Group Class
1.3.6.1.4.1.789.1.28.2.1.5ColumnqosPolicyGroupMaxThroughputread-onlycurrentMaximum Throughput
1.3.6.1.4.1.789.1.28.2.1.6ColumnqosPolicyGroupVserverread-onlycurrentVserver that the QoS Policy Group belongs to
1.3.6.1.4.1.789.1.28.2.1.7ColumnqosPolicyGroupMinThroughputread-onlycurrentMinimum Throughput
1.3.6.1.4.1.789.1.28.2.1.8ColumnqosPolicyGroupSharedread-onlycurrentWhether or not the policy group is shared
1.3.6.1.4.1.789.1.28.2.1.9ColumnqosPolicyGroupAutoGeneratedread-onlycurrentWhether or not the policy group is auto-generated by ONTAP
1.3.6.1.4.1.789.1.28.3TableqosReadaheadSettingsTablenot-accessiblecurrentTable of QoS Read-Ahead Settings.
1.3.6.1.4.1.789.1.28.3.1RowqosReadaheadSettingsEntrynot-accessiblecurrentEntry for a Read-Ahead Setting.
1.3.6.1.4.1.789.1.28.3.1.1ColumnqosReadaheadSettingNameread-onlycurrentReadahead Setting Name.
1.3.6.1.4.1.789.1.28.3.1.2ColumnqosReadaheadClassread-onlycurrentReadahead Setting Class.
1.3.6.1.4.1.789.1.28.3.1.3ColumnqosReadaheadDefaultread-onlycurrentIndicates if this is the default Read-Ahead Setting.
1.3.6.1.4.1.789.1.28.3.1.4ColumnqosReadaheadMinBlocksread-onlycurrentMinimum Blocks to Speculate.
1.3.6.1.4.1.789.1.28.3.1.5ColumnqosReadaheadMaxBlocksread-onlycurrentMaximum Blocks to Speculate.
1.3.6.1.4.1.789.1.28.3.1.6ColumnqosReadaheadAlignBlocksread-onlycurrentBlock Alignment.
1.3.6.1.4.1.789.1.28.3.1.7ColumnqosReadaheadMaxGapread-onlycurrentMaximum Speculative Blocks Outstanding.
1.3.6.1.4.1.789.1.28.3.1.8ColumnqosReadaheadMaxRangeread-onlycurrentMaximum Range Used When Aging Streams (Blocks.
1.3.6.1.4.1.789.1.28.3.1.9ColumnqosReadaheadMinRangeread-onlycurrentMinimum Range Used When Aging Streams (Blocks).
1.3.6.1.4.1.789.1.28.3.1.10ColumnqosReadaheadMaxDeadlineread-onlycurrentMaximum Deadline Offset (ms).
1.3.6.1.4.1.789.1.28.3.1.11ColumnqosReadaheadInterarrivalWeightread-onlycurrentWeight for Interarrival Time Aging (%).
1.3.6.1.4.1.789.1.28.3.1.12ColumnqosReadaheadDiskResponseWeightread-onlycurrentWeight for Disk Response Time Aging (%).
1.3.6.1.4.1.789.1.28.3.1.13ColumnqosReadaheadMinDiskResponseTimeread-onlycurrentMinimum Disk Response Time (ms).
1.3.6.1.4.1.789.1.28.3.1.14ColumnqosReadaheadMaxDiskResponseTimeread-onlycurrentMaximum Disk Response Time (ms)..
1.3.6.1.4.1.789.1.28.3.1.15ColumnqosReadaheadDiskResponseFactorread-onlycurrentDisk Response Time Factor.
1.3.6.1.4.1.789.1.28.3.1.16ColumnqosReadaheadOvershootread-onlycurrentAllowable Overshoot (%).
1.3.6.1.4.1.789.1.28.3.1.17ColumnqosReadaheadUseTimingread-onlycurrentUse Timing Algorithms.
1.3.6.1.4.1.789.1.28.3.1.18ColumnqosReadaheadUseAsyncread-onlycurrentUse Asynchronous Speculation.
1.3.6.1.4.1.789.1.28.3.1.19ColumnqosReadaheadMetadataread-onlycurrentDo Metadata Speculation.
1.3.6.1.4.1.789.1.28.3.1.20ColumnqosReadaheadForceDumpread-onlycurrentForce DUMP-Style Readahead.
1.3.6.1.4.1.789.1.28.3.1.21ColumnqosReadaheadForceFullread-onlycurrentForce Full-File Readahead.
1.3.6.1.4.1.789.1.28.3.1.22ColumnqosReadaheadForceNoneread-onlycurrentDisable Readahead.
1.3.6.1.4.1.789.1.28.3.1.23ColumnqosReadaheadUseFeedbackread-onlycurrentProvide Cache-Miss Feedback.
1.3.6.1.4.1.789.1.28.3.1.24ColumnqosReadaheadSmallFileBlocksread-onlycurrentMaximum Blocks for Small-File Handling.
1.3.6.1.4.1.789.1.28.3.1.25ColumnqosReadaheadMetadataBlocksread-onlycurrentMinimum Blocks for Which Metadata is Predicted.
1.3.6.1.4.1.789.1.28.3.1.26ColumnqosReadaheadEarlyCountread-onlycurrentNumber of IO Operations Cautiously Predicted.
1.3.6.1.4.1.789.1.28.3.1.27ColumnqosReadaheadJitterread-onlycurrentThreshold for Detecting Jitter (%).
1.3.6.1.4.1.789.1.28.3.1.28ColumnqosReadaheadMinRetireTimeread-onlycurrentMinimum Time Before a Stream is Retired (us)
1.3.6.1.4.1.789.1.28.3.1.29ColumnqosReadaheadMaxRetireTimeread-onlycurrentMaximum Time Before a Stream is Retired (us)
1.3.6.1.4.1.789.1.28.3.1.30ColumnqosReadaheadUseHistogramread-onlycurrentUse Histogram-based predictions.
1.3.6.1.4.1.789.1.28.3.1.31ColumnqosReadaheadMinFileHistogramread-onlycurrentMinimum filesize for Histogram-based predictions (blocks)
1.3.6.1.4.1.789.1.28.4TableqosAdaptivePolicyGroupTablenot-accessiblecurrentQoS Adaptive Policy Group Table.
1.3.6.1.4.1.789.1.28.4.1RowqosAdaptivePolicyGroupEntrynot-accessiblecurrentEntry for a QoS Adaptive Policy Group.
1.3.6.1.4.1.789.1.28.4.1.1ColumnqosAdaptivePolicyGroupUuidread-onlycurrentAdaptive Policy Group Uuid
1.3.6.1.4.1.789.1.28.4.1.2ColumnqosAdaptivePolicyGroupNameread-onlycurrentAdaptive Policy Group Name
1.3.6.1.4.1.789.1.28.4.1.3ColumnqosAdaptivePolicyGroupPgidread-onlycurrentAdaptive Policy Group ID
1.3.6.1.4.1.789.1.28.4.1.4ColumnqosAdaptivePolicyGroupVserverread-onlycurrentVserver that the QoS Adaptive Policy Group belongs to
1.3.6.1.4.1.789.1.28.4.1.5ColumnqosAdaptivePolicyGroupPeakIopsread-onlycurrentPeak IOPS
1.3.6.1.4.1.789.1.28.4.1.6ColumnqosAdaptivePolicyGroupExpectedIopsread-onlycurrentExpected IOPS
1.3.6.1.4.1.789.1.28.4.1.7ColumnqosAdaptivePolicyGroupAbsoluteMinIopsread-onlycurrentMinimum IOPS
1.3.6.1.4.1.789.1.28.4.1.8ColumnqosAdaptivePolicyGroupPeakIopsAllocationread-onlycurrentPeak IOPS Allocation
1.3.6.1.4.1.789.1.28.4.1.9ColumnqosAdaptivePolicyGroupExpectedIopsAllocationread-onlycurrentExpected IOPS Allocation
1.3.6.1.4.1.789.1.28.4.1.10ColumnqosAdaptivePolicyGroupBlockSizeread-onlycurrentBlock Size
1.3.6.1.4.1.789.1.29Nodesm
1.3.6.1.4.1.789.1.29.1TablesnapmirrorRelStatusTablenot-accessiblecurrentProvide a list of snapmirror status.
1.3.6.1.4.1.789.1.29.1.1RowsnapmirrorRelStatusEntrynot-accessiblecurrentProvide a report of current status of snapmirror.
1.3.6.1.4.1.789.1.29.1.1.1ColumnsnapmirrorRelIndexread-onlycurrentA number that identifies this snapmirror relationship. The cmodeSnapmirrorIndex is not related to any other table defined in this MIB.
1.3.6.1.4.1.789.1.29.1.1.2ColumnsnapmirrorRelSrcPathread-onlycurrentSource path of this relationship.
1.3.6.1.4.1.789.1.29.1.1.3ColumnsnapmirrorRelDestPathread-onlycurrentDestination path of this relationship.
1.3.6.1.4.1.789.1.29.1.1.4ColumnsnapmirrorRelTyperead-onlycurrentRelationship type of this relationship.
1.3.6.1.4.1.789.1.29.1.1.5ColumnsnapmirrorRelStatusread-onlycurrentCurrent transfer status of this relationship.
1.3.6.1.4.1.789.1.29.1.1.6ColumnsnapmirrorRelStateread-onlycurrentCurrent state of this relationship.
1.3.6.1.4.1.789.1.29.1.1.7ColumnsnapmirrorRelLagread-onlycurrentHow far behind from the source the destination is.
1.3.6.1.4.1.789.1.29.1.1.8ColumnsnapmirrorRelThrottleValueread-onlycurrentCurrent throttle value for this relationship.
1.3.6.1.4.1.789.1.29.1.1.9ColumnsnapmirrorRelScheduleread-onlycurrentThe schedule associated with this relationship.
1.3.6.1.4.1.789.1.29.1.1.10ColumnsnapmirrorRelPolicyread-onlycurrentThe policy associated with this relationship.
1.3.6.1.4.1.789.1.29.1.1.11ColumnsnapmirrorRelTransferSnapshotread-onlycurrentThe current transfer snapshot for this relationship.
1.3.6.1.4.1.789.1.29.1.1.12ColumnsnapmirrorRelNewestSnapshotread-onlycurrentThe newest snapshot at the destination of this relationship.
1.3.6.1.4.1.789.1.29.1.1.13ColumnsnapmirrorRelNewestSnapshotTimeStampread-onlycurrentThe time stamp of newest snapshot at the destination of this relationship.
1.3.6.1.4.1.789.1.29.1.1.14ColumnsnapmirrorRelExportedSnapshotread-onlycurrentThe exported snapshot at the destination of this relationship.
1.3.6.1.4.1.789.1.29.1.1.15ColumnsnapmirrorRelExportedSnapshotTimeStampread-onlycurrentThe time stamp of exported snapshot at the destination of this relationship.
1.3.6.1.4.1.789.1.29.1.1.16ColumnsnapmirrorRelHealthyread-onlycurrentIndicates whether this relationship is healthy or not.
1.3.6.1.4.1.789.1.29.1.1.17ColumnsnapmirrorRelUnHealthyReasonread-onlycurrentIndicates the specific reason due to which this relationship is not healthy.
1.3.6.1.4.1.789.1.29.1.1.18ColumnsnapmirrorRelLastTransferTyperead-onlycurrentThe type of the last transfer on this relationship.
1.3.6.1.4.1.789.1.29.1.1.19ColumnsnapmirrorRelLastTransferErrorread-onlycurrentThe last transfer error for this relationship.
1.3.6.1.4.1.789.1.29.1.1.20ColumnsnapmirrorRelLastTransferSizeread-onlycurrentThe size of the last transfer for this relationship.
1.3.6.1.4.1.789.1.29.1.1.21ColumnsnapmirrorRelLastTransferTimeSecondsread-onlycurrentThe duration of the last transfer for this relationship.
1.3.6.1.4.1.789.1.29.1.1.22ColumnsnapmirrorRelGroupTyperead-onlycurrentIndicate if this relationship is part of an Infinite Volume or Vserver DR relationship.
1.3.6.1.4.1.789.1.29.1.1.23ColumnsnapmirrorRelVserverread-onlycurrentDestination vserver to which this relationship belongs.
1.3.6.1.4.1.789.1.29.1.1.24ColumnsnapmirrorRelUpdateSuccCntread-onlycurrentTotal number of successful updates since this relationship was initialized.
1.3.6.1.4.1.789.1.29.1.1.25ColumnsnapmirrorRelUpdateFailCntread-onlycurrentTotal number of failed updates since this relationship was initialized.
1.3.6.1.4.1.789.1.29.1.1.26ColumnsnapmirrorRelResyncSuccCntread-onlycurrentTotal number of successful resyncs since this relationship was initialized.
1.3.6.1.4.1.789.1.29.1.1.27ColumnsnapmirrorRelResyncFailCntread-onlycurrentTotal number of failed resyncs since this relationship was initialized.
1.3.6.1.4.1.789.1.29.1.1.28ColumnsnapmirrorRelBreakSuccCntread-onlycurrentTotal number of successful breaks since this relationship was initialized.
1.3.6.1.4.1.789.1.29.1.1.29ColumnsnapmirrorRelBreakFailCntread-onlycurrentTotal number of failed breaks since this relationship was initialized.
1.3.6.1.4.1.789.1.29.1.1.30ColumnsnapmirrorRelTotalTransBytesread-onlycurrentTotal transfer bytes since this relationship was created.
1.3.6.1.4.1.789.1.29.1.1.31ColumnsnapmirrorRelTotalTransTimeSecondsread-onlycurrentTotal transfer time in seconds since this relationship was created.
1.3.6.1.4.1.789.2NodenetappProducts
1.3.6.1.4.1.789.2.1NodenetappFiler
1.3.6.1.4.1.789.2.2NodenetappNetCache
1.3.6.1.4.1.789.2.3NodenetappClusteredFiler
1.3.6.1.4.1.789.2.4NodenetappNode
1.3.6.1.4.1.789.2.5NodenetappCluster
1.3.6.1.4.1.789.2.6NodenetappVserver
1.3.6.1.4.1.789.3NodenetappDataFabricManager
1.3.6.1.4.1.789.4NodenetappSupportConsole
1.3.6.1.4.1.789.5NodenetappOnCommand
1.3.6.1.4.1.789.6NodenetappMcc
1.3.6.1.4.1.789.6.1NodenetappMcctb
1.3.6.1.6.3.789IdentitynetappModuleIdThe mib module for NetApp SNMPv2 entities
Type Definitions
NameSyntaxStatusDescription
BooleanINTEGER { false(0), true(1) }currentfalse|true
FileOrDirectoryStringOCTET STRING (SIZE (0..1023))currentAn octet string containing a file or directory name. UTF-8 encoding is used to represent Unicode characters. See [RFC2279]. Essentially, this is a longer variant of SnmpAdminString.
FilesystemPathStringOCTET STRING (SIZE (0..4095))currentAn octet string containing a filesystem path. UTF-8 encoding is used to represent Unicode characters. See [RFC2279]. Essentially, this is a longer variant of SnmpAdminString.
TimeTicks64Counter64currentRepresents time in hundredths (1/100) of a second since an epoch.
UuidOCTET STRING (SIZE (16))currentUniversally Unique Identifier
MIB Viewer