NETGEAR-GREENETHERNET-PRIVATE-MIB
29 objects
The MIB definitions for NETGEAR Green Ethernet Feature.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| NETGEAR-REF-MIB | ng7000managedswitch |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.55 | IdentityfastPathGreenEthernet | The MIB definitions for NETGEAR Green Ethernet Feature. | ||
| 1.3.6.1.4.1.4526.10.55.1 | NodeagentGreenEthernet | |||
| 1.3.6.1.4.1.4526.10.55.1.1 | TableagentGreenEthernetTable | not-accessible | current | A table providing configuration of green Ethernet features |
| 1.3.6.1.4.1.4526.10.55.1.1.1 | RowagentGreenEthernetEntry | not-accessible | current | Green Ethernet features for a port. |
| 1.3.6.1.4.1.4526.10.55.1.1.1.1 | ColumnagentEthernetIntfIndex | not-accessible | current | This is a unique index for an entry in the agentGreenEthernetTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable… |
| 1.3.6.1.4.1.4526.10.55.1.1.1.2 | ColumnagentGreenEnergyDetectMode | read-write | current | Enable or disable Energy Detect Mode. If Energy detect Mode is not supported on a particular port then not-applicable is displayed. When user tries to set not-… |
| 1.3.6.1.4.1.4526.10.55.1.1.1.3 | ColumnagentGreenEnergyDetectOperStatus | read-only | current | This tells if energy detect operational status is currently active or inactive. The energy detect mode may be administratively enabled, but the operational sta… |
| 1.3.6.1.4.1.4526.10.55.1.1.1.4 | ColumnagentGreenEnergyDetectOperReason | read-only | current | The energy detect mode may be administratively enabled, but the operational status may be inactive. The reasons for this may be that the Port is currently oper… |
| 1.3.6.1.4.1.4526.10.55.1.1.1.9 | ColumnagentGreenEeeMode | read-write | current | Enable or disable Energy Efficient Ethernet Mode. If EEE Mode is not supported on a particular port then not-applicable is displayed. When user tries to set no… |
| 1.3.6.1.4.1.4526.10.55.1.1.1.10 | ColumnagentGreenEeeTxWakeTime | read-write | current | Time for which MAC / switch has to wait to go back to ACTIVE state from LPI state when it receives packet for transmission. |
| 1.3.6.1.4.1.4526.10.55.1.1.1.11 | ColumnagentGreenEeeTxIdleTime | read-write | current | Time for which condition to move to LPI state is satisfied, at the end of which MAC TX transitions to LPI state. The value of this object must be a positive in… |
| 1.3.6.1.4.1.4526.10.55.1.1.1.12 | ColumnagentGreenCumEnergySaving | read-only | current | Estimated Cumulative Energy Saved on this port in (Watt*hours). |
| 1.3.6.1.4.1.4526.10.55.1.2 | TableagentGreenIntfEeeLpiHistoryTable | not-accessible | current | A table providing configuration and status of green Ethernet Power Saving History feature |
| 1.3.6.1.4.1.4526.10.55.1.2.1 | RowagentGreenIntfEeeLpiHistoryEntry | not-accessible | current | Green Ethernet features for a port. |
| 1.3.6.1.4.1.4526.10.55.1.2.1.1 | ColumnagentGreenEeeLpiHistoryIntfIndex | not-accessible | current | This is a unique index for an entry in the agentGreenEthernetTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. |
| 1.3.6.1.4.1.4526.10.55.1.2.1.2 | ColumnagentGreenEeeLpiHistoryIntfSampleIndex | not-accessible | current | This is a unique index for an entry in the agentGreenEthernetTable. A non-zero value indicates the sampleIndex for the corresponding sample entry in the Power … |
| 1.3.6.1.4.1.4526.10.55.1.2.1.3 | ColumnagentGreenEeeLpiHistoryIntfSampleTime | read-only | current | Time at which the Sample was collected. |
| 1.3.6.1.4.1.4526.10.55.1.2.1.4 | ColumnagentGreenEeeLpiHistoryIntfPercentLpiTime | read-only | current | Percentage of Time spent in LPI mode on this port since last sample. |
| 1.3.6.1.4.1.4526.10.55.1.2.1.5 | ColumnagentGreenEeeLpiHistoryIntfPercentLpiTimeTotal | read-only | current | Percentage of Time spent in LPI mode on this port since last reset. |
| 1.3.6.1.4.1.4526.10.55.1.3 | TableagentGreenUnitFeatureTable | not-accessible | current | A table providing configuration and status of green Ethernet Power Saving History feature |
| 1.3.6.1.4.1.4526.10.55.1.3.1 | RowagentGreenUnitFeatureEntry | not-accessible | current | Green Ethernet features for a port. |
| 1.3.6.1.4.1.4526.10.55.1.3.1.1 | ColumnagentGreenUnitIndex | not-accessible | current | This is a unique index for an entry in the agentGreenUnitFeatureTable. A non-zero value indicates the unitIndex for the corresponding unit entry in the Green E… |
| 1.3.6.1.4.1.4526.10.55.1.3.1.2 | ColumnagentGreenFeatureList | read-only | current | List of Green Features supported on the given unit which could be one or more of the following: Energy-Detect (Energy Detect) Short-Reach (Short Reach) EEE (En… |
| 1.3.6.1.4.1.4526.10.55.1.4 | ScalaragentGreenEeeLpiHistoryIntfSampleInterval | read-write | current | Interval at which power consumption data needs to be collected. |
| 1.3.6.1.4.1.4526.10.55.1.5 | ScalaragentGreenEeeLpiHistoryIntfMaxSamples | read-write | current | Maximum number of samples to keep. |
| 1.3.6.1.4.1.4526.10.55.1.6 | ScalaragentGreenEeeLpiHistoryLpiTimePerStack | read-only | current | Percentage of LPI time per stack. |
| 1.3.6.1.4.1.4526.10.55.1.7 | ScalaragentGreenStackCumEnergySaving | read-only | current | Estimated Cumulative Energy Saving (Watts * Hours) per Stack. |
| 1.3.6.1.4.1.4526.10.55.1.8 | ScalaragentGreenStackCurPowerConsumption | read-only | current | Estimated Current Power Consumption (mWatts) per Stack. |
| 1.3.6.1.4.1.4526.10.55.1.9 | ScalaragentGreenStackPowerSaving | read-only | current | Estimated Percentage Power Saving per Stack. |