MIB Viewer

NETGEAR-INVENTORY-MIB

117 objects
This MIB defines the objects used for FastPath to configure and report information and status of units, slots and supported cards.
Imported Objects
NETGEAR-REF-MIBng7000managedswitch
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString RowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.4526.10.13IdentityfastPathInventoryThis MIB defines the objects used for FastPath to configure and report information and status of units, slots and supported cards.
1.3.6.1.4.1.4526.10.13.0NodeagentInventoryTraps
1.3.6.1.4.1.4526.10.13.0.1NotificationagentInventoryCardMismatchcurrentSent when a card is inserted which is a different type than what the slot was configured for.
1.3.6.1.4.1.4526.10.13.0.2NotificationagentInventoryCardUnsupportedcurrentSent when a card is inserted which is of a type that is not supported by the slot.
1.3.6.1.4.1.4526.10.13.0.3NotificationagentInventoryStackPortLinkUpcurrentSent when a Stack Port is connected to annother Stack Member.
1.3.6.1.4.1.4526.10.13.0.4NotificationagentInventoryStackPortLinkDowncurrentSent when a Stack Port is disconnected from annother Stack Member.
1.3.6.1.4.1.4526.10.13.0.5NotificationagentInventorySFSStartcurrentSent when Stack Firmware Synchronization operation is started on a Stack Member.
1.3.6.1.4.1.4526.10.13.0.6NotificationagentInventorySFSCompletecurrentSent when Stack Firmware Synchronization operation is complete on a Stack Member.
1.3.6.1.4.1.4526.10.13.0.7NotificationagentInventorySFSFailcurrentSent when Stack Firmware Synchronization operation failed for a Stack Member.
1.3.6.1.4.1.4526.10.13.1NodeagentInventoryStackGroup
1.3.6.1.4.1.4526.10.13.1.1ScalaragentInventoryStackReplicateSTKread-writecurrentInitiates STK copy from management unit to all other management capable units in the stack.
1.3.6.1.4.1.4526.10.13.1.2ScalaragentInventoryStackReloadread-writecurrentInitiates stack reload.
1.3.6.1.4.1.4526.10.13.1.3ScalaragentInventoryStackMaxUnitNumberread-onlycurrentIndicates the maximum allowed Unit Number configurable on the stack.
1.3.6.1.4.1.4526.10.13.1.4ScalaragentInventoryStackReplicateSTKStatusread-onlycurrentIndicates the current status of an STK copy from management unit to all other management capable units inthe stack.
1.3.6.1.4.1.4526.10.13.1.5ScalaragentInventoryStackSTKnameread-writecurrentSTK file on management unit for copy/activate/delete operations to all units in the stack unconfigured(1) - indicates a default state and can not be set.
1.3.6.1.4.1.4526.10.13.1.6ScalaragentInventoryStackActivateSTKread-writecurrentActivates the specified STK file on all units on the stack.
1.3.6.1.4.1.4526.10.13.1.7ScalaragentInventoryStackDeleteSTKread-writecurrentDeletes the specified STK file from all units on the stack.
1.3.6.1.4.1.4526.10.13.1.8ScalaragentInventoryStackTemplateIdread-writecurrentSets the stack template ID on all units in the stack. Deletes the startup configuration on all affected units and resets all units in the stack. This is write-…
1.3.6.1.4.1.4526.10.13.2NodeagentInventoryUnitGroup
1.3.6.1.4.1.4526.10.13.2.1TableagentInventorySupportedUnitTablenot-accessiblecurrentTODO
1.3.6.1.4.1.4526.10.13.2.1.1RowagentInventorySupportedUnitEntrynot-accessiblecurrentTODO
1.3.6.1.4.1.4526.10.13.2.1.1.1ColumnagentInventorySupportedUnitIndexnot-accessiblecurrentThe unit identifier associated with the supported unit.
1.3.6.1.4.1.4526.10.13.2.1.1.4ColumnagentInventorySupportedUnitModelIdentifierread-onlycurrentThe model identifier for the supported unit.
1.3.6.1.4.1.4526.10.13.2.1.1.5ColumnagentInventorySupportedUnitDescriptionread-onlycurrentThe description of the supported unit.
1.3.6.1.4.1.4526.10.13.2.1.1.6ColumnagentInventorySupportedUnitExpectedCodeVerread-onlyobsoleteThe expected code version.
1.3.6.1.4.1.4526.10.13.2.2TableagentInventoryUnitTablenot-accessiblecurrentA table of Per-Unit configuration objects.
1.3.6.1.4.1.4526.10.13.2.2.1RowagentInventoryUnitEntrynot-accessiblecurrentEach Instance corresponds with a different unit managed by this agent.
1.3.6.1.4.1.4526.10.13.2.2.1.1ColumnagentInventoryUnitNumbernot-accessiblecurrentThe unit number associated with this unit.
1.3.6.1.4.1.4526.10.13.2.2.1.2ColumnagentInventoryUnitAssignNumberread-createcurrentAllows setting the unit number associated with this unit. This number must be less than the value returned by agentInventoryStackMaxUnitNumber. Setting this ob…
1.3.6.1.4.1.4526.10.13.2.2.1.3ColumnagentInventoryUnitTyperead-onlycurrentThe Unit Type identifier for this unit.
1.3.6.1.4.1.4526.10.13.2.2.1.4ColumnagentInventoryUnitSupportedUnitIndexread-createcurrentThe index of the unit type in agentInventorySupportedUnitTable which this unit is associated with.
1.3.6.1.4.1.4526.10.13.2.2.1.6ColumnagentInventoryUnitMgmtAdminread-createcurrentIndicates whether the unit is a Management Unit, a Stack Unit, or has been configured to be a Management Unit. Setting this object to mgmtUnit(1) initiates tra…
1.3.6.1.4.1.4526.10.13.2.2.1.7ColumnagentInventoryUnitHWMgmtPrefread-onlyobsoleteIndicates the default preference assigned to the unit.
1.3.6.1.4.1.4526.10.13.2.2.1.8ColumnagentInventoryUnitHWMgmtPrefValueread-onlyobsoleteIndicates the default preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit.
1.3.6.1.4.1.4526.10.13.2.2.1.9ColumnagentInventoryUnitAdminMgmtPrefread-createobsoleteIndicates the configured preference assigned to the unit. This object can not be set to assigned(3). Setting this object to disabled(1), or unassigned(2) will …
1.3.6.1.4.1.4526.10.13.2.2.1.10ColumnagentInventoryUnitAdminMgmtPrefValueread-createobsoleteIndicates the configured preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. Set…
1.3.6.1.4.1.4526.10.13.2.2.1.11ColumnagentInventoryUnitStatusread-onlycurrentThe unit status of this unit.
1.3.6.1.4.1.4526.10.13.2.2.1.12ColumnagentInventoryUnitDetectedCodeVerread-onlycurrentThe version of code running on this unit. If the unit is not detected then the code version is an empty string.
1.3.6.1.4.1.4526.10.13.2.2.1.13ColumnagentInventoryUnitDetectedCodeInFlashVerread-onlycurrentThe version of code that is currently stored in FLASH memory on the unit. This code will execute after the unit is reset. If the unit is not detected then this…
1.3.6.1.4.1.4526.10.13.2.2.1.14ColumnagentInventoryUnitUpTimeread-onlycurrentThe system up time of the unit.
1.3.6.1.4.1.4526.10.13.2.2.1.15ColumnagentInventoryUnitDescriptionread-onlycurrentThe description of the unit.
1.3.6.1.4.1.4526.10.13.2.2.1.16ColumnagentInventoryUnitReplicateSTKread-writecurrentInitiates the specified STK file copy from management unit to this unit.
1.3.6.1.4.1.4526.10.13.2.2.1.17ColumnagentInventoryUnitReloadread-writecurrentReload a specific unit in the stack.
1.3.6.1.4.1.4526.10.13.2.2.1.18ColumnagentInventoryUnitRowStatusread-createcurrentThe status of this unit instance. Creation of new instances requires the object agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the…
1.3.6.1.4.1.4526.10.13.2.2.1.19ColumnagentInventoryUnitSerialNumberread-onlycurrentThe Serial Number of the unit.
1.3.6.1.4.1.4526.10.13.2.2.1.20ColumnagentInventoryUnitImage1Versionread-onlycurrentCode version for Image1.
1.3.6.1.4.1.4526.10.13.2.2.1.21ColumnagentInventoryUnitImage2Versionread-onlycurrentCode version for Image2.
1.3.6.1.4.1.4526.10.13.2.2.1.22ColumnagentInventoryUnitSTKnameread-writecurrentSTK file to be used for copy/delete/activate operatiosn.
1.3.6.1.4.1.4526.10.13.2.2.1.23ColumnagentInventoryUnitActivateSTKread-writecurrentActivates the specified STK file on this unit.
1.3.6.1.4.1.4526.10.13.2.2.1.24ColumnagentInventoryUnitDeleteSTKread-writecurrentDeletes the specified STK file on this unit.
1.3.6.1.4.1.4526.10.13.2.2.1.25ColumnagentInventoryUnitReplicateSTKStatusread-onlycurrentIndicates the current status of an STK copy from the management unit to another management capable unit in the stack.
1.3.6.1.4.1.4526.10.13.2.2.1.26ColumnagentInventoryUnitStandbyread-writecurrentConfigures the standby status of this unit. The Management unit may not be configured. A unit that is standby_cfg(3) may be set to uassigned(1) to clear standb…
1.3.6.1.4.1.4526.10.13.2.2.1.27ColumnagentInventoryUnitSFSTransferStatusread-onlycurrentStatus parameter to indicate stack firmware synchronization operation status for a particular unit. If SFS transfer is in progress for a particular unit status…
1.3.6.1.4.1.4526.10.13.2.2.1.28ColumnagentInventoryUnitSFSLastAttemptStatusread-onlycurrentStatus parameter to indicate whether the last synchronization attempt succeeded or failed.If SFS is initated for a particular unit and if it completes successf…
1.3.6.1.4.1.4526.10.13.3NodeagentInventorySlotGroup
1.3.6.1.4.1.4526.10.13.3.1TableagentInventorySlotTablenot-accessiblecurrentTODO
1.3.6.1.4.1.4526.10.13.3.1.1RowagentInventorySlotEntrynot-accessiblecurrentTODO
1.3.6.1.4.1.4526.10.13.3.1.1.1ColumnagentInventorySlotNumbernot-accessiblecurrentAn incrimental index of the slot in this unit.
1.3.6.1.4.1.4526.10.13.3.1.1.3ColumnagentInventorySlotStatusread-onlycurrentIndicates the current status of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.4ColumnagentInventorySlotPowerModeread-writecurrentIndicates whether a card in this slot will be powered on.
1.3.6.1.4.1.4526.10.13.3.1.1.5ColumnagentInventorySlotAdminModeread-writecurrentIndicates whether this card is administratively enabled or disabled.
1.3.6.1.4.1.4526.10.13.3.1.1.6ColumnagentInventorySlotInsertedCardTyperead-onlycurrentIndicates the inserted card type. Will return 0 if the slot is not full.
1.3.6.1.4.1.4526.10.13.3.1.1.7ColumnagentInventorySlotConfiguredCardTyperead-writecurrentIndicates the configured card type. This object may be set with a corresponding value of agentInventoryCardType if this slot supports removable cards.
1.3.6.1.4.1.4526.10.13.3.1.1.8ColumnagentInventorySlotCapabilitiesread-onlycurrentIndicates the different capabilities this slot has. pluggable(0) - This slot can contain pluggable cards. power-down(1) - Power to this slot can be controlled …
1.3.6.1.4.1.4526.10.13.3.1.1.9ColumnagentInventorySlotSerialNumberread-onlycurrentIndicates the serial number of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.10ColumnagentInventorySlotVendorNameread-onlycurrentIndicates the vendor name of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.11ColumnagentInventorySlotManufacturerIdread-onlycurrentIndicates the manufacturer id of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.12ColumnagentInventorySlotFPGAVersionread-onlycurrentIndicates the FPGA version of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.13ColumnagentInventorySlotSoftwareVersionread-onlycurrentIndicates the software version of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.14ColumnagentInventorySlotBoardRevisionIdread-onlycurrentIndicates the board revision id of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.15ColumnagentInventorySlotProductNameread-onlycurrentIndicates the product name of the slot.
1.3.6.1.4.1.4526.10.13.3.1.1.16ColumnagentInventorySlotProductDescriptionread-onlycurrentIndicates the card description of the slot.
1.3.6.1.4.1.4526.10.13.4NodeagentInventoryCardGroup
1.3.6.1.4.1.4526.10.13.4.1TableagentInventoryCardTypeTablenot-accessiblecurrentContains information for all supported Card Types in the system.
1.3.6.1.4.1.4526.10.13.4.1.1RowagentInventoryCardTypeEntrynot-accessiblecurrentContains information related to a specific Card Type.
1.3.6.1.4.1.4526.10.13.4.1.1.1ColumnagentInventoryCardIndexnot-accessiblecurrentAn arbitrary index used to identify cards in the table.
1.3.6.1.4.1.4526.10.13.4.1.1.2ColumnagentInventoryCardTyperead-onlycurrentThe Card Type associated with this instance.
1.3.6.1.4.1.4526.10.13.4.1.1.3ColumnagentInventoryCardModelIdentifierread-onlycurrentThe model identifier for the supported Card Type.
1.3.6.1.4.1.4526.10.13.4.1.1.4ColumnagentInventoryCardDescriptionread-onlycurrentThe card description for the supported Card Type.
1.3.6.1.4.1.4526.10.13.5NodeagentInventoryComponentGroup
1.3.6.1.4.1.4526.10.13.5.1TableagentInventoryComponentTablenot-accessiblecurrentContains information for all supported Components in the system.
1.3.6.1.4.1.4526.10.13.5.1.1RowagentInventoryComponentEntrynot-accessiblecurrentContains information related to a specific Components.
1.3.6.1.4.1.4526.10.13.5.1.1.1ColumnagentInventoryComponentIndexnot-accessiblecurrentAn arbitrary index used to reference components in the table.
1.3.6.1.4.1.4526.10.13.5.1.1.2ColumnagentInventoryComponentMnemonicread-onlycurrentThe abreviated name of this component.
1.3.6.1.4.1.4526.10.13.5.1.1.3ColumnagentInventoryComponentNameread-onlycurrentThe name of the component for this instance.
1.3.6.1.4.1.4526.10.13.6NodefastPathInventoryConformance
1.3.6.1.4.1.4526.10.13.6.1NodefastPathInventoryCompliances
1.3.6.1.4.1.4526.10.13.6.1.1CompliancefastPathInventoryComplianceobsoleteThe compliance statement for SNMP entities which implement version 1 of the fastPathInventory MIB.
1.3.6.1.4.1.4526.10.13.6.1.2CompliancefastPathInventoryCompliance2currentThe compliance statement for SNMP entities which implement version 2 of the fastPathInventory MIB.
1.3.6.1.4.1.4526.10.13.6.2NodefastPathInventoryGroups
1.3.6.1.4.1.4526.10.13.6.2.1GroupfastPathInventorySupportedUnitGroupcurrentThe collection of objects which are used to represent multiple units in the stack.
1.3.6.1.4.1.4526.10.13.6.2.2GroupfastPathInventoryUnitGroupcurrentThe collection of objects which are used to represent multiple units in the stack.
1.3.6.1.4.1.4526.10.13.6.2.3GroupfastPathInventorySlotGroupcurrentThe collection of objects which are used to represent slots in the each unit managed by this agent.
1.3.6.1.4.1.4526.10.13.6.2.4GroupfastPathInventoryCardGroupcurrentThe collection of objects which are used to represent the card types this system can manage.
1.3.6.1.4.1.4526.10.13.6.2.5GroupfastPathInventoryNotificationsGroupcurrentThe collection of notifications used to indicate problems associated with the insertion of cards.
1.3.6.1.4.1.4526.10.13.7NodeagentInventoryStackPortGroup
1.3.6.1.4.1.4526.10.13.7.1ScalaragentInventoryStackPortIpTelephonyQOSSupportread-writecurrentControls whether the Stack Ports give higher priority to IP Telephony traffic.
1.3.6.1.4.1.4526.10.13.7.2TableagentInventoryStackPortTablenot-accessiblecurrentContains information for all Stack Ports present in the system.
1.3.6.1.4.1.4526.10.13.7.2.1RowagentInventoryStackPortEntrynot-accessiblecurrentContains information related to a specific Stack Port.
1.3.6.1.4.1.4526.10.13.7.2.1.1ColumnagentInventoryStackPortIndexnot-accessiblecurrentAn arbitrary index used to reference Stack Ports in the table.
1.3.6.1.4.1.4526.10.13.7.2.1.2ColumnagentInventoryStackPortUnitread-onlycurrentThe Unit Index this Stack Port is physically located on.
1.3.6.1.4.1.4526.10.13.7.2.1.3ColumnagentInventoryStackPortTagread-onlycurrentThe name of the Stack Port for this instance.
1.3.6.1.4.1.4526.10.13.7.2.1.4ColumnagentInventoryStackPortConfiguredStackModeread-writecurrentConfigured mode of the Stack Port. Changes to this value happen only after a reset of the switch.
1.3.6.1.4.1.4526.10.13.7.2.1.5ColumnagentInventoryStackPortRunningStackModeread-onlycurrentCurrently operational mode of the Stack Port.
1.3.6.1.4.1.4526.10.13.7.2.1.6ColumnagentInventoryStackPortLinkStatusread-onlycurrentLink status of the Stack Port. Ports which are in ethernet mode will return a status of down(2).
1.3.6.1.4.1.4526.10.13.7.2.1.7ColumnagentInventoryStackPortLinkSpeedread-onlycurrentSpeed of the Stack Port measured in Gb/s. Ports which are in ethernet mode will return a speed of 0.
1.3.6.1.4.1.4526.10.13.7.2.1.8ColumnagentInventoryStackPortDataRateread-onlycurrentApproximate data rate on the stacking port. Measured in Gb/s. Ports which are in ethernet mode will return 0.
1.3.6.1.4.1.4526.10.13.7.2.1.9ColumnagentInventoryStackPortErrorRateread-onlycurrentApproximate error rate on the stack port. Measured in Errors per Second. Ports which are in ethernet mode will return 0.
1.3.6.1.4.1.4526.10.13.7.2.1.10ColumnagentInventoryStackPortTotalErrorsread-onlycurrentNumber of errors since boot. The counter may wrap. Ports which are in ethernet mode will return 0.
1.3.6.1.4.1.4526.10.13.8NodeagentInventorySFSGroup
1.3.6.1.4.1.4526.10.13.8.1ScalaragentInventoryStackUnitNumbernot-accessiblecurrentThe unit number associated with stack unit .
1.3.6.1.4.1.4526.10.13.8.2ScalaragentInventorySFSread-writecurrentControls whether the Stack Firmware Synchronization is enabled or disabled.
1.3.6.1.4.1.4526.10.13.8.3ScalaragentInventorySFSAllowDowngraderead-writecurrentControls whether downgrading the image on the stack member is allowed or not if the firmware version of manager is older to firmware version of stack member
1.3.6.1.4.1.4526.10.13.8.4ScalaragentInventorySFSTrapread-writecurrentControls sending of traps during Stack firmware synchronization operation
Type Definitions
NameSyntaxStatusDescription
AgentInventoryCardTypeUnsigned32currentThe Card Type value for a given card, displayed in hexadecimal.
AgentInventoryUnitPreferenceINTEGER { disabled(0), unsassigned(1), assigned(2) }currentIndicates the preference the unit has for being the management unit in the stack. If the value is 0, it indicates the unit is disabled for management.
AgentInventoryUnitTypeUnsigned32currentThe Unit Type value for a given unit, displayed in hexadecimal.
MIB Viewer