NETGEAR-ME-MIB
122 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526 | Nodenetgear | |||
| 1.3.6.1.4.1.4526.4 | NodewirelessProducts | |||
| 1.3.6.1.4.1.4526.4.1 | NodewirelessAccessPointDev | |||
| 1.3.6.1.4.1.4526.4.1.1 | NodewirelessAPSystemGroup | |||
| 1.3.6.1.4.1.4526.4.1.1.1 | ScalarwirelessAPMacAddr | read-only | mandatory | Access Point MAC address, It will be like '00c002003009' |
| 1.3.6.1.4.1.4526.4.1.1.2 | ScalarwirelessAPFWVer | read-only | mandatory | Access Point firmware version, It will be like 'Version 2.0 Release 08' |
| 1.3.6.1.4.1.4526.4.1.1.3 | ScalarwirelessAPDateTime | read-only | mandatory | The date and time, with optional timezone information. It will be like '2003-04-03 02:50:54 GMT' |
| 1.3.6.1.4.1.4526.4.1.1.4 | ScalarwirelessAPUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. It will like '11223533' in the unit of 1/100se… |
| 1.3.6.1.4.1.4526.4.1.1.5 | ScalarwirelessAPResetNow | read-write | mandatory | Setting this object to true(1) causes the device to reset. Reading this object always returns false(2). |
| 1.3.6.1.4.1.4526.4.1.1.6 | ScalarwirelessAPResetToFactoryDefault | read-write | mandatory | Setting this object to true(1) causes the device to reset to factory default value. Reading this object always returns false(2). |
| 1.3.6.1.4.1.4526.4.1.1.7 | ScalarwirelessAPPassword | read-write | mandatory | Get/Set the password |
| 1.3.6.1.4.1.4526.4.1.1.8 | ScalarwirelessAPClearLog | read-write | mandatory | Setting this value clear(1) causes the AP to clear the log data, Reading this walue always return not-clear(0). |
| 1.3.6.1.4.1.4526.4.1.1.9 | ScalarwirelessAPSaveConfiguration | read-write | mandatory | Setting this value save(1) causes the settings changed by SNMP to be stored forever but in memory, Reading this walue always return save(0). |
| 1.3.6.1.4.1.4526.4.1.1.10 | ScalarsnmpTrapVersion | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.11 | ScalarsnmpTrapRcvIpType | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.12 | ScalarsnmpAPTrapRcvIpAddress | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.13 | ScalarsnmpAPSNMPEnable | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.14 | ScalarsnmpAPCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.15 | ScalarsnmpAPAccessRight | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.16 | ScalarsnmpAPManagersType | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.17 | ScalarsnmpAPSpecificStationIp | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.1.18 | ScalarsnmpAPTrapEnable | read-write | mandatory | |
| 1.3.6.1.4.1.4526.4.1.2 | NodewirelessAPConnectedStationGroup | |||
| 1.3.6.1.4.1.4526.4.1.2.1 | ScalarwirelessAPConnectedStationTableRefresh | read-write | mandatory | Setting this value to refresh(1), the wireless AP will start the conntected Station Table refresh progress. Reading this vlaue always return not-refresh(1) |
| 1.3.6.1.4.1.4526.4.1.2.2 | NodewirelessAPConnectedStation | |||
| 1.3.6.1.4.1.4526.4.1.2.2.1 | TablewirelessAPConnectedStationTable | not-accessible | mandatory | Wireless AP Connected Station Table Object |
| 1.3.6.1.4.1.4526.4.1.2.2.1.1 | RowwirelessAPConnectedStationEntry | not-accessible | mandatory | An entry containing information for Wireless AP Connected Station Table |
| 1.3.6.1.4.1.4526.4.1.2.2.1.1.2 | ColumnwirelessAPConnectedStationMacAddr | read-only | mandatory | Wireless Connected Station Mac Address |
| 1.3.6.1.4.1.4526.4.1.2.2.1.1.3 | ColumnwirelessAPConnectedStationStatus | read-only | mandatory | Wireless Connected Station Status |
| 1.3.6.1.4.1.4526.4.1.2.3 | ScalarwirelessAPControl | read-write | mandatory | Wireless Access Point Control |
| 1.3.6.1.4.1.4526.4.1.2.4 | NodewirelessAPControlList | |||
| 1.3.6.1.4.1.4526.4.1.2.4.1 | TablewirelessAPControlListTable | not-accessible | mandatory | Wireless Access Point Control List Table Object |
| 1.3.6.1.4.1.4526.4.1.2.4.1.1 | RowwirelessAPControlListEntry | not-accessible | mandatory | An entry containing information for Wireless Access Point Control List Table Object |
| 1.3.6.1.4.1.4526.4.1.2.4.1.1.2 | ColumnwirelessAPControlListMacAddr | read-write | mandatory | Wireless Access Point Control List Mac Address |
| 1.3.6.1.4.1.4526.4.1.2.5 | NodewirelessAPCtlOperate | |||
| 1.3.6.1.4.1.4526.4.1.2.5.1 | ScalarwirelessAPAddCtlMacAddr | read-write | mandatory | The added entry's Physical Address, Reading this object always return '000000000000' |
| 1.3.6.1.4.1.4526.4.1.2.5.2 | ScalarwirelessAPDelCtlMacAddr | read-write | mandatory | The deleted entry's Physical Address, Reading this object always return '000000000000' |
| 1.3.6.1.4.1.4526.4.1.3 | NodewirelessAPIfTrafficGroup | |||
| 1.3.6.1.4.1.4526.4.1.3.1 | NodewirelessAPIfWiredTrafficGroup | |||
| 1.3.6.1.4.1.4526.4.1.3.1.1 | ScalarwirelessAPIfWiredTotalOctetsIn | read-only | mandatory | Traffic received by the wireless AP via Ethernet in octets |
| 1.3.6.1.4.1.4526.4.1.3.1.2 | ScalarwirelessAPIfWiredTotalOctetsOut | read-only | mandatory | Traffic transmitted by the wireless AP via Ethernet in octets |
| 1.3.6.1.4.1.4526.4.1.3.1.3 | ScalarwirelessAPIfWiredPacketsIn | read-only | mandatory | Traffic received by the wireless AP via Ethernet in packets |
| 1.3.6.1.4.1.4526.4.1.3.1.4 | ScalarwirelessAPIfWiredPacketsOut | read-only | mandatory | Traffic transmitted by the wireless AP via Ethernet in packets. |
| 1.3.6.1.4.1.4526.4.1.3.1.5 | ScalarwirelessAPIfWiredThroughputIn | read-only | mandatory | Throughput-in at Ethernet by the wireless AP in the unit of B/s |
| 1.3.6.1.4.1.4526.4.1.3.1.6 | ScalarwirelessAPIfWiredThroughputOut | read-only | mandatory | Throughput-out at Ethernet by the wireless AP in the unit of B/s |
| 1.3.6.1.4.1.4526.4.1.3.1.7 | ScalarwirelessAPIfWiredErrorsIn | read-only | mandatory | CRC errors in in-traffic occurs at Ethernet by the wireless AP |
| 1.3.6.1.4.1.4526.4.1.3.1.8 | ScalarwirelessAPIfWiredErrorsOut | read-only | mandatory | CRC errors in out-traffic occurs at Ethernet by the wireless AP |
| 1.3.6.1.4.1.4526.4.1.3.1.9 | ScalarwirelessAPIfWiredTrafficResetCounter | read-write | mandatory | Reset the Etherenet interface both Octets In and Out counters |
| 1.3.6.1.4.1.4526.4.1.3.2 | NodewirelessAPIfWlanTrafficGroup | |||
| 1.3.6.1.4.1.4526.4.1.3.2.1 | ScalarwirelessAPIfWLANTotalOctetsIn | read-only | mandatory | Traffic received via WLAN by the wireless AP in octets |
| 1.3.6.1.4.1.4526.4.1.3.2.2 | ScalarwirelessAPIfWLANTotalOctetsOut | read-only | mandatory | Traffic transmitted via WLAN by the wireless AP in octets |
| 1.3.6.1.4.1.4526.4.1.3.2.3 | ScalarwirelessAPIfWLANUnicastPacketsIn | read-only | mandatory | Unicast traffic received via WLAN by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.4 | ScalarwirelessAPIfWLANUnicastPacketsOut | read-only | mandatory | Unicast traffic transmitted via WLAN by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.5 | ScalarwirelessAPIfWLANBroadcastPacketsIn | read-only | mandatory | Broadcast traffic received via WLAN by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.6 | ScalarwirelessAPIfWLANBroadcastPacketsOut | read-only | mandatory | Broadcast traffic transmitted via WLAN by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.7 | ScalarwirelessAPIfWLANMulticastPacketsIn | read-only | mandatory | Multicast traffic received via WLAN by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.8 | ScalarwirelessAPIfWLANMulticastPacketsOut | read-only | mandatory | Multicast traffic transmitted via WLAN by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.9 | ScalarwirelessAPIfWLANThroughputIn | read-only | mandatory | Throughtput-in at WLAN transmitted by the wireless AP in the unit of B/s |
| 1.3.6.1.4.1.4526.4.1.3.2.10 | ScalarwirelessAPIfWLANThroughputOut | read-only | mandatory | Throughtput-out at WLAN transmitted by the wireless AP in the unit of B/s |
| 1.3.6.1.4.1.4526.4.1.3.2.11 | ScalarwirelessAPIfWLANPacketsIn | read-only | mandatory | Total in-packets at WLAN received by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.12 | ScalarwirelessAPIfWLANPacketsOut | read-only | mandatory | Total out-packets at WLAN transmitted by the wireless AP in packets |
| 1.3.6.1.4.1.4526.4.1.3.2.13 | ScalarwirelessAPIfWLANTrafficResetCounter | read-write | mandatory | Reset the WLAN interface 's counters, they will start from 0 again. |
| 1.3.6.1.4.1.4526.4.1.4 | NodewirelessAPIfSettingsGroup | |||
| 1.3.6.1.4.1.4526.4.1.4.1 | ScalarwirelessAPDHCPClientObtainIPchoice | read-write | mandatory | Wireless Access Point DHCP Client Obtain an IP address choice static(0) means use static IP addess; automatic(1) means obtain an IP address automatically from … |
| 1.3.6.1.4.1.4526.4.1.4.2 | ScalarwirelessAPDHCPClientIPaddr | read-only | mandatory | Wireless Access Point DHCP Client IP address If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStati… |
| 1.3.6.1.4.1.4526.4.1.4.3 | ScalarwirelessAPDHCPClientIPsubnetMask | read-only | mandatory | Wireless Access Point DHCP Client IP subnet mask If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientS… |
| 1.3.6.1.4.1.4526.4.1.4.4 | ScalarwirelessAPDHCPClientGateway | read-only | mandatory | Wireless Access Point DHCP Client gateway If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStaticGa… |
| 1.3.6.1.4.1.4526.4.1.4.5 | ScalarwirelessAPDHCPClientPriDNS | read-only | mandatory | Wireless Access Point DHCP Client primary DNS If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientStat… |
| 1.3.6.1.4.1.4526.4.1.4.6 | ScalarwirelessAPDHCPClientSecDNS | read-only | mandatory | Wireless Access Point DHCP Client secondary DNS If wirelessAPDHCPClientObtainIPchoice is set to static(0), then it should be the same as wirelessAPDHCPClientSt… |
| 1.3.6.1.4.1.4526.4.1.4.7 | ScalarwirelessAPDHCPClientStaticIPaddr | read-write | mandatory | Wireless Access Point DHCP Client static IP address If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0. |
| 1.3.6.1.4.1.4526.4.1.4.8 | ScalarwirelessAPDHCPClientStaticIPsubnetMask | read-write | mandatory | Wireless Access Point DHCP Client static IP subnet mask If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0. |
| 1.3.6.1.4.1.4526.4.1.4.9 | ScalarwirelessAPDHCPClientStaticGateway | read-write | mandatory | Wireless Access Point DHCP Client static gateway If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0. |
| 1.3.6.1.4.1.4526.4.1.4.10 | ScalarwirelessAPDHCPClientStaticPriDNS | read-write | mandatory | Wireless Access Point DHCP Client static primary DNS If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0. |
| 1.3.6.1.4.1.4526.4.1.4.11 | ScalarwirelessAPDHCPClientStaticSecDNS | read-write | mandatory | Wireless Access Point DHCP Client static secondary DNS If wirelessAPDHCPClientObtainIPchoice is set to automatic (1), then it should be 0.0.0.0. |
| 1.3.6.1.4.1.4526.4.1.4.12 | ScalarwirelessAPName | read-write | mandatory | Wireless Access Point Name |
| 1.3.6.1.4.1.4526.4.1.4.13 | ScalarwirelessAPWINSchoice | read-write | mandatory | Wireless Access Point WINS choice If it is set to disAbled, then not using WINS. |
| 1.3.6.1.4.1.4526.4.1.4.14 | ScalarwirelessAPWINSServerName | read-write | mandatory | WINS Server Name If wirelessAPWINSchoice is enAbled, either set this object If wirelessAPWINSchoice is disAbled, this object value should be cleared |
| 1.3.6.1.4.1.4526.4.1.5 | NodewirelessAPWirelessSettingsGroup | |||
| 1.3.6.1.4.1.4526.4.1.5.1 | ScalarwirelessAPCountryDomain | read-write | mandatory | Wireless Access Point Country Domain |
| 1.3.6.1.4.1.4526.4.1.5.2 | ScalarwirelessAPChannelNo | read-write | mandatory | Wireless Access Point Channel No Auto(0) default |
| 1.3.6.1.4.1.4526.4.1.5.3 | ScalarwirelessAPSSID | read-write | mandatory | Wireless Access Point SSID This object value should be the same as IEEE 802.11 MIB dot11DesiredSSID |
| 1.3.6.1.4.1.4526.4.1.5.7 | ScalarwirelessAPPassphrase | read-write | mandatory | Wireless AP Passphrase This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled |
| 1.3.6.1.4.1.4526.4.1.5.8 | ScalarwirelessAPGenerateKeysEnabled | read-write | mandatory | Wireless Access Point Generate Keys This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled |
| 1.3.6.1.4.1.4526.4.1.5.9 | NodewirelessAPKeysSet | |||
| 1.3.6.1.4.1.4526.4.1.5.9.1 | TablewirelessAPKeysSetTable | not-accessible | mandatory | Wireless Access Point Keys Set Table Object This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled |
| 1.3.6.1.4.1.4526.4.1.5.9.1.1 | RowwirelessAPKeysSetEntry | not-accessible | mandatory | An entry containing information for Wireless Access Point Keys Set Table |
| 1.3.6.1.4.1.4526.4.1.5.9.1.1.2 | ColumnwirelessAPKeysSetEnabled | read-write | mandatory | Enabled or Disabled a Wireless Access Point Key This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled We only allow one key set will be … |
| 1.3.6.1.4.1.4526.4.1.5.9.1.1.3 | ColumnwirelessAPKeys | read-write | mandatory | Wireless AP Key This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled |
| 1.3.6.1.4.1.4526.4.1.5.10 | ScalarwirelessAPBasicRateChoice | read-write | mandatory | Wireless AP Basic Rate selection: auto(0) means Auto-negotiate and fixed(1) means Fixed rate |
| 1.3.6.1.4.1.4526.4.1.5.11 | NodewirelessAPFixedRate | |||
| 1.3.6.1.4.1.4526.4.1.5.11.1 | ScalarwirelessAPFixedRate1 | read-write | mandatory | If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, … |
| 1.3.6.1.4.1.4526.4.1.5.11.2 | ScalarwirelessAPFixedRate2 | read-write | mandatory | If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, … |
| 1.3.6.1.4.1.4526.4.1.5.11.3 | ScalarwirelessAPFixedRate5-5 | read-write | mandatory | If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, … |
| 1.3.6.1.4.1.4526.4.1.5.11.4 | ScalarwirelessAPFixedRate11 | read-write | mandatory | If wirelessAPBasicRateChoice is set to auto(0), then the value in this object should be empty. oneM means 1Mbps, twoM means 2Mbps, fiveDotfiveM means 5.5Mbps, … |
| 1.3.6.1.4.1.4526.4.1.5.12 | ScalarwirelessAPRTSThreshold | read-write | mandatory | The value in this object should be the same as IEEE 802.11 dot11RTSThreshold |
| 1.3.6.1.4.1.4526.4.1.5.13 | ScalarwirelessAPFragmentationThreshold | read-write | mandatory | The value in this object should be the same as IEEE 802.11 dot11FragmentationThreshold |
| 1.3.6.1.4.1.4526.4.1.5.14 | ScalarwirelessAPBeaconPeriod | read-write | mandatory | The value in this object should be the same as IEEE 802.11 dot11BeaconPeriod |
| 1.3.6.1.4.1.4526.4.1.5.15 | ScalarwirelessAPShortPreambleOptionImplemented | read-write | mandatory | The value of this object is 0 denoting that the short preamble used, 1 denoting that the long preamble used. |
| 1.3.6.1.4.1.4526.4.1.5.16 | ScalarwirelessAPAntennaSelection | read-write | mandatory | Antenna Selection |
| 1.3.6.1.4.1.4526.4.1.5.17 | ScalarwirelessAPMaximumTransmitPowerLevel | read-write | mandatory | The value in this object should be the same as IEEE 802.11 dot11MaximumTransmitPowerLevel. However, our default value will be 18dbm. copy from IEEE 802.11 MIB:… |
| 1.3.6.1.4.1.4526.4.1.5.18 | ScalarwirelessAPOperatingMode | read-write | mandatory | Operating Mode |
| 1.3.6.1.4.1.4526.4.1.5.19 | ScalarwirelessAPSSIDEnabled | read-write | mandatory | Enabled or disabled Wireless Access Point Broadcast Wireless Network Name SSID |
| 1.3.6.1.4.1.4526.4.1.6 | NodewirelessAPSecuritySettingsGroup | |||
| 1.3.6.1.4.1.4526.4.1.6.1 | ScalarwirelessAP802dot1xSecurityEnabled | read-write | mandatory | 802.1x Security enabled or disabled |
| 1.3.6.1.4.1.4526.4.1.6.2 | ScalarwirelessAPEAPauthType | read-write | mandatory | Operating Mode This object won't be allowed to write unless wirelessAP802dot1xSecurityEnabled is enAbled |
| 1.3.6.1.4.1.4526.4.1.6.3 | ScalarwirelessAPRadiusServer | read-write | mandatory | Radius Server Name/IP Address |
| 1.3.6.1.4.1.4526.4.1.6.4 | ScalarwirelessAPRadiusPort | read-write | mandatory | Radius Port |
| 1.3.6.1.4.1.4526.4.1.6.5 | ScalarwirelessAPSharedKey | read-write | mandatory | Radius Server Shared Key |
| 1.3.6.1.4.1.4526.4.1.6.7 | ScalarwirelessAPRadiusServer2 | read-write | mandatory | Radius Server Name/IP Address |
| 1.3.6.1.4.1.4526.4.1.6.11 | ScalarwirelessAPRadAccountPort | read-write | mandatory | Radius Accounting Port |
| 1.3.6.1.4.1.4526.4.1.6.16 | ScalarwirelessAPKeyExchange | read-write | mandatory | AP Key Exchange enabled or disabled |
| 1.3.6.1.4.1.4526.4.1.6.17 | ScalarwirelessAPKeyExchangeKeylife | read-write | mandatory | AP exchanged key lifetime |
| 1.3.6.1.4.1.4526.4.1.6.18 | ScalarwirelessAPRadAccountEnable | read-write | mandatory | AP Radius Accounting enabled or disabled |
| 1.3.6.1.4.1.4526.4.1.6.19 | ScalarwirelessAPMacAuthEnable | read-write | mandatory | AP Mac Authentication enabled or disabled |
| 1.3.6.1.4.1.4526.4.1.6.21 | ScalarwirelessAPRadAccountUpdateEnable | read-write | mandatory | AP Radius Account Update enabled or disabled |
| 1.3.6.1.4.1.4526.4.1.6.22 | ScalarwirelessAPRadAccountUpdatePeriod | read-write | mandatory | AP Radius Account Update Period |
| 1.3.6.1.4.1.4526.4.1.6.23 | ScalarwirelessAPRadAccountIdlePeriod | read-write | mandatory | Idle timer for AP not receiving any traffic from a wireless station to perform a dissociation |
| 1.3.6.1.4.1.4526.4.1.6.25 | ScalarwirelessTIOperateMode | read-write | mandatory | AP Operation Mode |
| 1.3.6.1.4.1.4526.4.1.6.26 | ScalarwirelessTIDstMac | read-write | mandatory | The Destination Address When one operation mode is selected which the remote address necessary. |
| 1.3.6.1.4.1.4526.4.1.6.28 | ScalarwirelessTIIsolation | read-write | mandatory | AP Wireless Separation Setting |
| 1.3.6.1.4.1.4526.4.1.6.29 | ScalarwirelessTIEnable80211d | read-write | mandatory | AP Worldwide Mode Setting |
| 1.3.6.1.4.1.4526.4.1.6.37 | ScalarwirelessAPSecurityMode | read-write | mandatory | AP Security Mode Setting, can take the place of AP Authentication and Encryption Setting Logic Relation. |