NETGEAR-MSRP-MIB
82 objects
The Netgear Private MIB for 802.1Qat, 802.1Qav Configuration
Imported Objects
| NETGEAR-MRP-MIB | agentDot1qMrpMxrp |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.60.2.3 | IdentityfastPathMSRP | The Netgear Private MIB for 802.1Qat, 802.1Qav Configuration | ||
| 1.3.6.1.4.1.4526.10.60.2.3.1 | NodeagentDot1qMsrp | |||
| 1.3.6.1.4.1.4526.10.60.2.3.1.1 | TableagentDot1qPortMsrpTable | not-accessible | current | A table of MRP control information about every bridge port. This is indexed by agentDot1qBasePort. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.1.1 | RowagentDot1qPortMsrpEntry | not-accessible | current | MRP control information for a bridge port. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.1.1.1 | ColumnagentDot1qMsrpPort | not-accessible | current | The MRP port number. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.1.1.2 | ColumnagentDot1qPortMsrpEnabledStatus | read-write | current | The administrative state of MSRP operation on this port. The value true(1) indicates that MSRP is enabled on this port in all VLANs as long as agentDot1qBridge… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.1.1.3 | ColumnagentDot1qPortMsrpFailedRegistrations | read-only | current | The total number of failed MSRP registrations, for any reason, in all VLANs, on this port. Discontinuities in the value of the counter can occur at re-initiali… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.1.1.4 | ColumnagentDot1qPortMsrpLastPduOrigin | read-only | current | The Source MAC Address of the last MSRP message received on this port. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.1.1.5 | ColumnagentDot1qPortMsrpPvid | read-write | current | The default VLAN ID that Streams are assigned to. Talkers learn this VID from the SRP Domain attribute and tag Streams accordingly. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.2 | ScalaragentDot1qBridgeMsrpEnabledStatus | read-write | current | The administrative status requested by management for MSRP. The value true(1) indicates that MSRP should be enabled on this device, in all VLANs, on all ports … |
| 1.3.6.1.4.1.4526.10.60.2.3.1.3 | ScalaragentDot1qBridgeMsrpTalkerPruning | read-write | current | The value of the talkerPruning parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are only dec… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.4 | ScalaragentDot1qBridgeMsrpMaxFanInPorts | read-write | current | The value of the msrpMaxFanInPorts parameter which limits the total number of ports on a Bridge that are allowed to establish reservations for inbound Streams.… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.6 | ScalaragentDot1qBridgeMsrpBoundaryPropagate | read-write | current | The value of the boundaryPropagate parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are prop… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7 | TableagentDot1qMsrpStreamTable | not-accessible | current | A table of detailed MSRP stream information. This is indexed by Stream ID. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1 | RowagentDot1qMsrpStreamEntry | not-accessible | current | A list of objects containing characteristics for each registered Stream. Rows in the table are automatically created for Streams registered on any port of a br… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.1 | ColumnagentDot1qMsrpStreamIndex | not-accessible | current | An index for MSRP Details Table. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.2 | ColumnagentDot1qMsrpStreamID | read-only | current | The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.3 | ColumnagentDot1qMsrpStreamDestMacAddr | read-only | current | The MAC destination address for the Stream described by this reservation. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.4 | ColumnagentDot1qMsrpStreamVlanId | read-only | current | The VLAN ID associated with the MSRP registration for this Stream. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.5 | ColumnagentDot1qMsrpStreamTspecMaxFrameSize | read-only | current | The maximum size frame that will be sent by a Talker for this Stream. This value is part of the Traffic Specification for the Stream. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.6 | ColumnagentDot1qMsrpStreamTspecMaxIntervalFrames | read-only | current | The maximum number of frame that will be sent during a class measurement interval. This value is part of the Traffic Specification for the Stream. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.7 | ColumnagentDot1qMsrpStreamDataFramePriority | read-only | current | The 802.1Q user priority value that the referenced Stream will be tagged with. This value is used to distinguish Class A and Class B traffic. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.7.1.8 | ColumnagentDot1qMsrpStreamRank | read-only | current | SRP supports emergency and non-emergency. Emergency traffic will interrupt non-emergency traffic if there is insufficient bandwidth or resources available for … |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8 | TableagentDot1qMsrpReservationTable | not-accessible | current | A table containing Stream attribute registrations per port. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1 | RowagentDot1qMsrpReservationEntry | not-accessible | current | A list of objects containing Stream attribute registrations per port. Rows in the table are automatically created for Streams registered on any port of a bridg… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.1 | ColumnagentDot1qMsrpReservationStreamId | not-accessible | current | The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.2 | ColumnagentDot1qMsrpReservationDirection | not-accessible | current | The source of this Stream registration, either Talker or Listener. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.3 | ColumnagentDot1qMsrpReservationDeclarationType | read-only | current | The type of Talker or Listener registration. |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.4 | ColumnagentDot1qMsrpReservationAccumulatedLatency | read-only | current | The Accumulated Latency associated with the current registration. For Talker registrations this represents the accumulated latency from the Talker to the ingre… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.5 | ColumnagentDot1qMsrpReservationFailureBridgeId | read-only | current | The first Bridge that changes a Talker Advertise to a Talker Failed registration will report its Bridge Identification in this field. That single Bridge Identi… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.6 | ColumnagentDot1qMsrpReservationFailureCode | read-only | current | The first Bridge that changes a Talker Advertise to a Talker Failed registration will report the Failure Code in this field. That single Failure Code is then p… |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.7 | ColumnagentDot1qMsrpReservationDroppedStreamFrames | read-only | current | A count of the number of data stream frames that have been dropped for whatever reason. These are not MSRP frames, but the stream data frames that are carried … |
| 1.3.6.1.4.1.4526.10.60.2.3.1.8.1.8 | ColumnagentDot1qMsrpReservationStreamAge | read-only | current | The number of seconds since the reservation was established on this port. Talkers shall report this as the seconds since the first receipt of the Talker Advert… |
| 1.3.6.1.4.1.4526.10.60.2.3.2 | NodeagentDot1qMrpMsrpStats | |||
| 1.3.6.1.4.1.4526.10.60.2.3.2.1 | ScalaragentDot1qMrpMsrpPktTx | read-only | current | The number of frames was transmitted. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.2 | ScalaragentDot1qMrpMsrpPktRx | read-only | current | The number of frames was received. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.3 | ScalaragentDot1qMrpMsrpPktRxBadHeader | read-only | current | The number of frames with bad header was received. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.4 | ScalaragentDot1qMrpMsrpPktRxBadFormat | read-only | current | The number of frames with bad data field was not transmitted. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.5 | ScalaragentDot1qMrpMsrpPktTxFailure | read-only | current | The number of frames was not transmitted on interface. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6 | TableagentDot1qMrpMsrpStatsTable | not-accessible | current | A table which contains MSRP statistics per port. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1 | RowagentDot1qMrpMsrpStatisticsEntry | not-accessible | current | MSRP statistics entry. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1.1 | ColumnagentDot1qMrpMsrpIntf | not-accessible | current | Index of agentDot1qMrpMsrpStatistics table. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1.2 | ColumnagentDot1qMrpMsrpPortPktTx | read-only | current | The number of frames was transmitted on interface. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1.3 | ColumnagentDot1qMrpMsrpPortPktRx | read-only | current | The number of frames was received on interface. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1.4 | ColumnagentDot1qMrpMsrpPortPktRxBadHeader | read-only | current | The number of frames with bad header was received on interface. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1.5 | ColumnagentDot1qMrpMsrpPortPktRxBadFormat | read-only | current | The number of frames with bad data field was not transmitted on interface. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1.6 | ColumnagentDot1qMrpMsrpPortPktTxFailure | read-only | current | The number of frames was not transmitted on interface. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.6.1.7 | ColumnagentDot1qMrpMsrpPortPktRegFailure | read-only | current | The number of failed registration attempts on interface. |
| 1.3.6.1.4.1.4526.10.60.2.3.2.7 | ScalaragentDot1qMrpMsrpPktMessageFailure | read-only | current | The number of failures while adding message into MSRP queue. |
| 1.3.6.1.4.1.4526.10.60.2.3.3 | NodeagentDot1qFqtss | |||
| 1.3.6.1.4.1.4526.10.60.2.3.3.0 | NodeagentDot1qFqtssNotifications | |||
| 1.3.6.1.4.1.4526.10.60.2.3.3.1 | NodeagentDot1qFqtssObjects | |||
| 1.3.6.1.4.1.4526.10.60.2.3.3.2 | NodeagentDot1qFqtssConformance | |||
| 1.3.6.1.4.1.4526.10.60.2.3.3.3 | NodeagentDot1qFqtssBap | |||
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1 | TableagentDot1qFqtssBapTable | not-accessible | current | A table containing a set of bandwidth availability parameters for each traffic class that supports the credit-based shaper algorithm. All writable objects in t… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1.1 | RowagentDot1qFqtssBapEntry | not-accessible | current | A list of objects containing bandwidth allocation information for each traffic class that supports the credit-based shaper algorithm. Rows in the table are aut… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1.1.1 | ColumnagentDot1qFqtssTrafficClass | not-accessible | current | The traffic class number associated with the row of the table. A row in this table is created for each traffic class that supports the credit-based shaper algr… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1.1.2 | ColumnagentDot1qFqtssDeltaBandwidth | read-write | current | The value of the deltaBandwidth parameter for the traffic class. This value is represented as a fixed point number scaled by a factor of 1,000,000; i.e., 100,0… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1.1.3 | ColumnagentDot1qFqtssOperIdleSlopeMs | read-only | current | The most significant 32 bits of the bandwidth, in bits per second, that is currently allocated to the traffic class (idleSlope(N)). This object MUST be read at… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1.1.4 | ColumnagentDot1qFqtssOperIdleSlopeLs | read-only | current | The least significant 32 bits of the bandwidth, in bits per second, that is currently allocated to the traffic class (idleSlope(N)). This object MUST be read a… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1.1.5 | ColumnagentDot1qFqtssAdminIdleSlopeMs | read-write | current | The most significant 32 bits of the bandwidth, in bits per second, that the manager desires to allocate to the traffic class as idleSlope(N). This object MUST … |
| 1.3.6.1.4.1.4526.10.60.2.3.3.3.1.1.6 | ColumnagentDot1qFqtssAdminIdleSlopeLs | read-write | current | The least significant 32 bits of the bandwidth, in bits per second, that the manager desires to allocate to the traffic class as idleSlope(N). This object MUST… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4 | NodeagentDot1qFqtssMappings | |||
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.1 | TableagentDot1qFqtssTxSelectionAlgorithmTable | not-accessible | current | A table containing the assignment of transmission selection algorithms to traffic classes for the Port. This table provides management of the Transmission Sele… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.1.1 | RowagentDot1qFqtssTxSelectionAlgorithmEntry | not-accessible | current | A list of objects that contain the mapping of a traffic class value to a transmission selection algorithm value. |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.1.1.1 | ColumnagentDot1qFqtssTxSelectionAlgorithmID | read-write | current | The identifier of the transmission selection algorithm assigned to the traffic class. The value of this object MUST be retained across reinitializations of the… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.2 | TableagentDot1qFqtssSrpRegenOverrideTable | not-accessible | current | A table containing the set of priority regeneration table override values for the Port. The recommended default values of priorities associated with SR classes… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.2.1 | RowagentDot1qFqtssSrpRegenOverrideEntry | not-accessible | current | A list of objects that contain the mapping of a priority value to a priority regeneration override value, and a boundary port indication. Rows in the table exi… |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.2.1.1 | ColumnagentDot1qFqtssSrClassPriority | read-write | current | The priority value that is overridden at the SRP domain boundary. |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.2.1.2 | ColumnagentDot1qFqtssPriorityRegenOverride | read-write | current | The priority value that is used to override the priority regeneration table entry at the SRP domain boundary. The value of this object MUST be retained across … |
| 1.3.6.1.4.1.4526.10.60.2.3.3.4.2.1.3 | ColumnagentDot1qFqtssSrpBoundaryPort | read-only | current | The value of the SRPdomainBoundaryPort parameter (6.6.4) for the priority. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | ||
| Dot1qFqtssDeltaBandwidthValue | Unsigned32 (0..100000000) | current | An 802.1 FQTSS delta bandwidth percentage, represented as a fixed point number scaled by 1,000,000. |
| Dot1qFqtssTrafficClassValue | Unsigned32 (0..7) | current | An 802.1 FQTSS traffic class value. This is the numerical value associated with a traffic class in a Bridge. Larger values are associated with higher priority traffic classes. |
| Dot1qFtqssTxSelectionAlgorithmIDValue | Unsigned32 | current | An 802.1 transmission selection algorithm identifier value. This is an integer, with the following interpretation placed on the value: 0: Strict priority algorithm, 1: Credit-based shaper algorithm, 2-255: Reserved for … |
| Dot1qMsrpReservationDeclarationTypeValue | INTEGER { talkerAdvertise(0), talkerFailed(1), listenerAskingFailed(2), listenerReady(3), listenerReadyFailed(4) } | current | An 802.1 SRP Stream Reservation Declaration Type value. This is an integer, with the following interpretation placed on the value: 0: Talker Advertise, 1: Talker Failed, 2: Listener Asking Failed, 3: Listener Ready, 4: … |
| Dot1qMsrpReservationDirectionValue | INTEGER { talkerRegistrations(0), listenerRegistrations(1) } | current | An 802.1 SRP Stream Reservation Direction value. This is an integer, with the following interpretation placed on the value: 0: Talker registrations, 1: Listener registrations. |
| Dot1qMsrpReservationFailureCodeValue | INTEGER { noFailure(0), insufficientBandwidth(1), insufficientResources(2), insufficientTrafficClassBandwidth(3), streamIDInUse(4), streamDestinationAddressInUse(5), streamPreemptedByHigherRank(6), latencyHasChanged(7), egressPortNotAVBCapable(8), useDifferentDestinationAddress(9), outOfMSRPResources(10), outOfMMRPResources(11), cannotStoreDestinationAddress(12), priorityIsNoAnSRCLass(13), maxFrameSizeTooLarge(14), maxFanInPortsLimitReached(15), firstValueChangedForStreamID(16), vlanBlockedOnEgress(17), vlanTaggingDisabledOnEgress(18), srClassPriorityMismatch(19) } | current | An 802.1 SRP Stream Reservation Failure Code value. This is an integer, with the following interpretation placed on the value: 0: No failure, 1: Insufficient bandwidth, 2: Insufficient Bridge resources, 3: Insufficient … |
| Dot1qMsrpStreamIdValue | OCTET STRING (SIZE (8)) | current | Represents an SRP Stream ID, which is often defined as a MAC Address followed by a unique 16-bit ID. |
| Dot1qMsrpStreamRankValue | INTEGER { emergency(0), nonEmergency(1) } | current | An 802.1 SRP Stream Rank value. This is an integer, with the following interpretation placed on the value: 0: Emergency, high-rank stream, 1: Non-emergency stream. |
| Dot1qPriorityValue | Unsigned32 (0..7) | current | An 802.1Q user priority value. |
| VlanId | INTEGER (1..4094) | current | A 12-bit VLAN ID used in the VLAN Tag header. |